|  | /* | 
|  | * Copyright (C) 2009 Texas Instruments. | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License as published by | 
|  | * the Free Software Foundation; either version 2 of the License, or | 
|  | * (at your option) any later version. | 
|  | * | 
|  | * This program is distributed in the hope that it will be useful, | 
|  | * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
|  | * GNU General Public License for more details. | 
|  | * | 
|  | * You should have received a copy of the GNU General Public License | 
|  | * along with this program; if not, write to the Free Software | 
|  | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA | 
|  | */ | 
|  |  | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/io.h> | 
|  | #include <linux/gpio.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/err.h> | 
|  | #include <linux/clk.h> | 
|  | #include <linux/dma-mapping.h> | 
|  | #include <linux/spi/spi.h> | 
|  | #include <linux/spi/spi_bitbang.h> | 
|  | #include <linux/slab.h> | 
|  |  | 
|  | #include <mach/spi.h> | 
|  | #include <mach/edma.h> | 
|  |  | 
|  | #define SPI_NO_RESOURCE		((resource_size_t)-1) | 
|  |  | 
|  | #define SPI_MAX_CHIPSELECT	2 | 
|  |  | 
|  | #define CS_DEFAULT	0xFF | 
|  |  | 
|  | #define SPI_BUFSIZ	(SMP_CACHE_BYTES + 1) | 
|  | #define DAVINCI_DMA_DATA_TYPE_S8	0x01 | 
|  | #define DAVINCI_DMA_DATA_TYPE_S16	0x02 | 
|  | #define DAVINCI_DMA_DATA_TYPE_S32	0x04 | 
|  |  | 
|  | #define SPIFMT_PHASE_MASK	BIT(16) | 
|  | #define SPIFMT_POLARITY_MASK	BIT(17) | 
|  | #define SPIFMT_DISTIMER_MASK	BIT(18) | 
|  | #define SPIFMT_SHIFTDIR_MASK	BIT(20) | 
|  | #define SPIFMT_WAITENA_MASK	BIT(21) | 
|  | #define SPIFMT_PARITYENA_MASK	BIT(22) | 
|  | #define SPIFMT_ODD_PARITY_MASK	BIT(23) | 
|  | #define SPIFMT_WDELAY_MASK	0x3f000000u | 
|  | #define SPIFMT_WDELAY_SHIFT	24 | 
|  | #define SPIFMT_CHARLEN_MASK	0x0000001Fu | 
|  |  | 
|  | /* SPIGCR1 */ | 
|  | #define SPIGCR1_SPIENA_MASK	0x01000000u | 
|  |  | 
|  | /* SPIPC0 */ | 
|  | #define SPIPC0_DIFUN_MASK	BIT(11)		/* MISO */ | 
|  | #define SPIPC0_DOFUN_MASK	BIT(10)		/* MOSI */ | 
|  | #define SPIPC0_CLKFUN_MASK	BIT(9)		/* CLK */ | 
|  | #define SPIPC0_SPIENA_MASK	BIT(8)		/* nREADY */ | 
|  | #define SPIPC0_EN1FUN_MASK	BIT(1) | 
|  | #define SPIPC0_EN0FUN_MASK	BIT(0) | 
|  |  | 
|  | #define SPIINT_MASKALL		0x0101035F | 
|  | #define SPI_INTLVL_1		0x000001FFu | 
|  | #define SPI_INTLVL_0		0x00000000u | 
|  |  | 
|  | /* SPIDAT1 */ | 
|  | #define SPIDAT1_CSHOLD_SHIFT	28 | 
|  | #define SPIDAT1_CSNR_SHIFT	16 | 
|  | #define SPIGCR1_CLKMOD_MASK	BIT(1) | 
|  | #define SPIGCR1_MASTER_MASK     BIT(0) | 
|  | #define SPIGCR1_LOOPBACK_MASK	BIT(16) | 
|  |  | 
|  | /* SPIBUF */ | 
|  | #define SPIBUF_TXFULL_MASK	BIT(29) | 
|  | #define SPIBUF_RXEMPTY_MASK	BIT(31) | 
|  |  | 
|  | /* Error Masks */ | 
|  | #define SPIFLG_DLEN_ERR_MASK		BIT(0) | 
|  | #define SPIFLG_TIMEOUT_MASK		BIT(1) | 
|  | #define SPIFLG_PARERR_MASK		BIT(2) | 
|  | #define SPIFLG_DESYNC_MASK		BIT(3) | 
|  | #define SPIFLG_BITERR_MASK		BIT(4) | 
|  | #define SPIFLG_OVRRUN_MASK		BIT(6) | 
|  | #define SPIFLG_RX_INTR_MASK		BIT(8) | 
|  | #define SPIFLG_TX_INTR_MASK		BIT(9) | 
|  | #define SPIFLG_BUF_INIT_ACTIVE_MASK	BIT(24) | 
|  | #define SPIFLG_MASK			(SPIFLG_DLEN_ERR_MASK \ | 
|  | | SPIFLG_TIMEOUT_MASK | SPIFLG_PARERR_MASK \ | 
|  | | SPIFLG_DESYNC_MASK | SPIFLG_BITERR_MASK \ | 
|  | | SPIFLG_OVRRUN_MASK | SPIFLG_RX_INTR_MASK \ | 
|  | | SPIFLG_TX_INTR_MASK \ | 
|  | | SPIFLG_BUF_INIT_ACTIVE_MASK) | 
|  |  | 
|  | #define SPIINT_DLEN_ERR_INTR	BIT(0) | 
|  | #define SPIINT_TIMEOUT_INTR	BIT(1) | 
|  | #define SPIINT_PARERR_INTR	BIT(2) | 
|  | #define SPIINT_DESYNC_INTR	BIT(3) | 
|  | #define SPIINT_BITERR_INTR	BIT(4) | 
|  | #define SPIINT_OVRRUN_INTR	BIT(6) | 
|  | #define SPIINT_RX_INTR		BIT(8) | 
|  | #define SPIINT_TX_INTR		BIT(9) | 
|  | #define SPIINT_DMA_REQ_EN	BIT(16) | 
|  | #define SPIINT_ENABLE_HIGHZ	BIT(24) | 
|  |  | 
|  | #define SPI_T2CDELAY_SHIFT	16 | 
|  | #define SPI_C2TDELAY_SHIFT	24 | 
|  |  | 
|  | /* SPI Controller registers */ | 
|  | #define SPIGCR0		0x00 | 
|  | #define SPIGCR1		0x04 | 
|  | #define SPIINT		0x08 | 
|  | #define SPILVL		0x0c | 
|  | #define SPIFLG		0x10 | 
|  | #define SPIPC0		0x14 | 
|  | #define SPIPC1		0x18 | 
|  | #define SPIPC2		0x1c | 
|  | #define SPIPC3		0x20 | 
|  | #define SPIPC4		0x24 | 
|  | #define SPIPC5		0x28 | 
|  | #define SPIPC6		0x2c | 
|  | #define SPIPC7		0x30 | 
|  | #define SPIPC8		0x34 | 
|  | #define SPIDAT0		0x38 | 
|  | #define SPIDAT1		0x3c | 
|  | #define SPIBUF		0x40 | 
|  | #define SPIEMU		0x44 | 
|  | #define SPIDELAY	0x48 | 
|  | #define SPIDEF		0x4c | 
|  | #define SPIFMT0		0x50 | 
|  | #define SPIFMT1		0x54 | 
|  | #define SPIFMT2		0x58 | 
|  | #define SPIFMT3		0x5c | 
|  | #define TGINTVEC0	0x60 | 
|  | #define TGINTVEC1	0x64 | 
|  |  | 
|  | struct davinci_spi_slave { | 
|  | u32	cmd_to_write; | 
|  | u32	clk_ctrl_to_write; | 
|  | u32	bytes_per_word; | 
|  | u8	active_cs; | 
|  | }; | 
|  |  | 
|  | /* We have 2 DMA channels per CS, one for RX and one for TX */ | 
|  | struct davinci_spi_dma { | 
|  | int			dma_tx_channel; | 
|  | int			dma_rx_channel; | 
|  | int			dma_tx_sync_dev; | 
|  | int			dma_rx_sync_dev; | 
|  | enum dma_event_q	eventq; | 
|  |  | 
|  | struct completion	dma_tx_completion; | 
|  | struct completion	dma_rx_completion; | 
|  | }; | 
|  |  | 
|  | /* SPI Controller driver's private data. */ | 
|  | struct davinci_spi { | 
|  | struct spi_bitbang	bitbang; | 
|  | struct clk		*clk; | 
|  |  | 
|  | u8			version; | 
|  | resource_size_t		pbase; | 
|  | void __iomem		*base; | 
|  | size_t			region_size; | 
|  | u32			irq; | 
|  | struct completion	done; | 
|  |  | 
|  | const void		*tx; | 
|  | void			*rx; | 
|  | u8			*tmp_buf; | 
|  | int			count; | 
|  | struct davinci_spi_dma	*dma_channels; | 
|  | struct			davinci_spi_platform_data *pdata; | 
|  |  | 
|  | void			(*get_rx)(u32 rx_data, struct davinci_spi *); | 
|  | u32			(*get_tx)(struct davinci_spi *); | 
|  |  | 
|  | struct davinci_spi_slave slave[SPI_MAX_CHIPSELECT]; | 
|  | }; | 
|  |  | 
|  | static unsigned use_dma; | 
|  |  | 
|  | static void davinci_spi_rx_buf_u8(u32 data, struct davinci_spi *davinci_spi) | 
|  | { | 
|  | u8 *rx = davinci_spi->rx; | 
|  |  | 
|  | *rx++ = (u8)data; | 
|  | davinci_spi->rx = rx; | 
|  | } | 
|  |  | 
|  | static void davinci_spi_rx_buf_u16(u32 data, struct davinci_spi *davinci_spi) | 
|  | { | 
|  | u16 *rx = davinci_spi->rx; | 
|  |  | 
|  | *rx++ = (u16)data; | 
|  | davinci_spi->rx = rx; | 
|  | } | 
|  |  | 
|  | static u32 davinci_spi_tx_buf_u8(struct davinci_spi *davinci_spi) | 
|  | { | 
|  | u32 data; | 
|  | const u8 *tx = davinci_spi->tx; | 
|  |  | 
|  | data = *tx++; | 
|  | davinci_spi->tx = tx; | 
|  | return data; | 
|  | } | 
|  |  | 
|  | static u32 davinci_spi_tx_buf_u16(struct davinci_spi *davinci_spi) | 
|  | { | 
|  | u32 data; | 
|  | const u16 *tx = davinci_spi->tx; | 
|  |  | 
|  | data = *tx++; | 
|  | davinci_spi->tx = tx; | 
|  | return data; | 
|  | } | 
|  |  | 
|  | static inline void set_io_bits(void __iomem *addr, u32 bits) | 
|  | { | 
|  | u32 v = ioread32(addr); | 
|  |  | 
|  | v |= bits; | 
|  | iowrite32(v, addr); | 
|  | } | 
|  |  | 
|  | static inline void clear_io_bits(void __iomem *addr, u32 bits) | 
|  | { | 
|  | u32 v = ioread32(addr); | 
|  |  | 
|  | v &= ~bits; | 
|  | iowrite32(v, addr); | 
|  | } | 
|  |  | 
|  | static inline void set_fmt_bits(void __iomem *addr, u32 bits, int cs_num) | 
|  | { | 
|  | set_io_bits(addr + SPIFMT0 + (0x4 * cs_num), bits); | 
|  | } | 
|  |  | 
|  | static inline void clear_fmt_bits(void __iomem *addr, u32 bits, int cs_num) | 
|  | { | 
|  | clear_io_bits(addr + SPIFMT0 + (0x4 * cs_num), bits); | 
|  | } | 
|  |  | 
|  | static void davinci_spi_set_dma_req(const struct spi_device *spi, int enable) | 
|  | { | 
|  | struct davinci_spi *davinci_spi = spi_master_get_devdata(spi->master); | 
|  |  | 
|  | if (enable) | 
|  | set_io_bits(davinci_spi->base + SPIINT, SPIINT_DMA_REQ_EN); | 
|  | else | 
|  | clear_io_bits(davinci_spi->base + SPIINT, SPIINT_DMA_REQ_EN); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Interface to control the chip select signal | 
|  | */ | 
|  | static void davinci_spi_chipselect(struct spi_device *spi, int value) | 
|  | { | 
|  | struct davinci_spi *davinci_spi; | 
|  | struct davinci_spi_platform_data *pdata; | 
|  | u32 data1_reg_val = 0; | 
|  |  | 
|  | davinci_spi = spi_master_get_devdata(spi->master); | 
|  | pdata = davinci_spi->pdata; | 
|  |  | 
|  | /* | 
|  | * Board specific chip select logic decides the polarity and cs | 
|  | * line for the controller | 
|  | */ | 
|  | if (value == BITBANG_CS_INACTIVE) { | 
|  | set_io_bits(davinci_spi->base + SPIDEF, CS_DEFAULT); | 
|  |  | 
|  | data1_reg_val |= CS_DEFAULT << SPIDAT1_CSNR_SHIFT; | 
|  | iowrite32(data1_reg_val, davinci_spi->base + SPIDAT1); | 
|  |  | 
|  | while ((ioread32(davinci_spi->base + SPIBUF) | 
|  | & SPIBUF_RXEMPTY_MASK) == 0) | 
|  | cpu_relax(); | 
|  | } | 
|  | } | 
|  |  | 
|  | /** | 
|  | * davinci_spi_setup_transfer - This functions will determine transfer method | 
|  | * @spi: spi device on which data transfer to be done | 
|  | * @t: spi transfer in which transfer info is filled | 
|  | * | 
|  | * This function determines data transfer method (8/16/32 bit transfer). | 
|  | * It will also set the SPI Clock Control register according to | 
|  | * SPI slave device freq. | 
|  | */ | 
|  | static int davinci_spi_setup_transfer(struct spi_device *spi, | 
|  | struct spi_transfer *t) | 
|  | { | 
|  |  | 
|  | struct davinci_spi *davinci_spi; | 
|  | struct davinci_spi_platform_data *pdata; | 
|  | u8 bits_per_word = 0; | 
|  | u32 hz = 0, prescale = 0, clkspeed; | 
|  |  | 
|  | davinci_spi = spi_master_get_devdata(spi->master); | 
|  | pdata = davinci_spi->pdata; | 
|  |  | 
|  | if (t) { | 
|  | bits_per_word = t->bits_per_word; | 
|  | hz = t->speed_hz; | 
|  | } | 
|  |  | 
|  | /* if bits_per_word is not set then set it default */ | 
|  | if (!bits_per_word) | 
|  | bits_per_word = spi->bits_per_word; | 
|  |  | 
|  | /* | 
|  | * Assign function pointer to appropriate transfer method | 
|  | * 8bit, 16bit or 32bit transfer | 
|  | */ | 
|  | if (bits_per_word <= 8 && bits_per_word >= 2) { | 
|  | davinci_spi->get_rx = davinci_spi_rx_buf_u8; | 
|  | davinci_spi->get_tx = davinci_spi_tx_buf_u8; | 
|  | davinci_spi->slave[spi->chip_select].bytes_per_word = 1; | 
|  | } else if (bits_per_word <= 16 && bits_per_word >= 2) { | 
|  | davinci_spi->get_rx = davinci_spi_rx_buf_u16; | 
|  | davinci_spi->get_tx = davinci_spi_tx_buf_u16; | 
|  | davinci_spi->slave[spi->chip_select].bytes_per_word = 2; | 
|  | } else | 
|  | return -EINVAL; | 
|  |  | 
|  | if (!hz) | 
|  | hz = spi->max_speed_hz; | 
|  |  | 
|  | clear_fmt_bits(davinci_spi->base, SPIFMT_CHARLEN_MASK, | 
|  | spi->chip_select); | 
|  | set_fmt_bits(davinci_spi->base, bits_per_word & 0x1f, | 
|  | spi->chip_select); | 
|  |  | 
|  | clkspeed = clk_get_rate(davinci_spi->clk); | 
|  | if (hz > clkspeed / 2) | 
|  | prescale = 1 << 8; | 
|  | if (hz < clkspeed / 256) | 
|  | prescale = 255 << 8; | 
|  | if (!prescale) | 
|  | prescale = ((clkspeed / hz - 1) << 8) & 0x0000ff00; | 
|  |  | 
|  | clear_fmt_bits(davinci_spi->base, 0x0000ff00, spi->chip_select); | 
|  | set_fmt_bits(davinci_spi->base, prescale, spi->chip_select); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void davinci_spi_dma_rx_callback(unsigned lch, u16 ch_status, void *data) | 
|  | { | 
|  | struct spi_device *spi = (struct spi_device *)data; | 
|  | struct davinci_spi *davinci_spi; | 
|  | struct davinci_spi_dma *davinci_spi_dma; | 
|  | struct davinci_spi_platform_data *pdata; | 
|  |  | 
|  | davinci_spi = spi_master_get_devdata(spi->master); | 
|  | davinci_spi_dma = &(davinci_spi->dma_channels[spi->chip_select]); | 
|  | pdata = davinci_spi->pdata; | 
|  |  | 
|  | if (ch_status == DMA_COMPLETE) | 
|  | edma_stop(davinci_spi_dma->dma_rx_channel); | 
|  | else | 
|  | edma_clean_channel(davinci_spi_dma->dma_rx_channel); | 
|  |  | 
|  | complete(&davinci_spi_dma->dma_rx_completion); | 
|  | /* We must disable the DMA RX request */ | 
|  | davinci_spi_set_dma_req(spi, 0); | 
|  | } | 
|  |  | 
|  | static void davinci_spi_dma_tx_callback(unsigned lch, u16 ch_status, void *data) | 
|  | { | 
|  | struct spi_device *spi = (struct spi_device *)data; | 
|  | struct davinci_spi *davinci_spi; | 
|  | struct davinci_spi_dma *davinci_spi_dma; | 
|  | struct davinci_spi_platform_data *pdata; | 
|  |  | 
|  | davinci_spi = spi_master_get_devdata(spi->master); | 
|  | davinci_spi_dma = &(davinci_spi->dma_channels[spi->chip_select]); | 
|  | pdata = davinci_spi->pdata; | 
|  |  | 
|  | if (ch_status == DMA_COMPLETE) | 
|  | edma_stop(davinci_spi_dma->dma_tx_channel); | 
|  | else | 
|  | edma_clean_channel(davinci_spi_dma->dma_tx_channel); | 
|  |  | 
|  | complete(&davinci_spi_dma->dma_tx_completion); | 
|  | /* We must disable the DMA TX request */ | 
|  | davinci_spi_set_dma_req(spi, 0); | 
|  | } | 
|  |  | 
|  | static int davinci_spi_request_dma(struct spi_device *spi) | 
|  | { | 
|  | struct davinci_spi *davinci_spi; | 
|  | struct davinci_spi_dma *davinci_spi_dma; | 
|  | struct davinci_spi_platform_data *pdata; | 
|  | struct device *sdev; | 
|  | int r; | 
|  |  | 
|  | davinci_spi = spi_master_get_devdata(spi->master); | 
|  | davinci_spi_dma = &davinci_spi->dma_channels[spi->chip_select]; | 
|  | pdata = davinci_spi->pdata; | 
|  | sdev = davinci_spi->bitbang.master->dev.parent; | 
|  |  | 
|  | r = edma_alloc_channel(davinci_spi_dma->dma_rx_sync_dev, | 
|  | davinci_spi_dma_rx_callback, spi, | 
|  | davinci_spi_dma->eventq); | 
|  | if (r < 0) { | 
|  | dev_dbg(sdev, "Unable to request DMA channel for SPI RX\n"); | 
|  | return -EAGAIN; | 
|  | } | 
|  | davinci_spi_dma->dma_rx_channel = r; | 
|  | r = edma_alloc_channel(davinci_spi_dma->dma_tx_sync_dev, | 
|  | davinci_spi_dma_tx_callback, spi, | 
|  | davinci_spi_dma->eventq); | 
|  | if (r < 0) { | 
|  | edma_free_channel(davinci_spi_dma->dma_rx_channel); | 
|  | davinci_spi_dma->dma_rx_channel = -1; | 
|  | dev_dbg(sdev, "Unable to request DMA channel for SPI TX\n"); | 
|  | return -EAGAIN; | 
|  | } | 
|  | davinci_spi_dma->dma_tx_channel = r; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * davinci_spi_setup - This functions will set default transfer method | 
|  | * @spi: spi device on which data transfer to be done | 
|  | * | 
|  | * This functions sets the default transfer method. | 
|  | */ | 
|  |  | 
|  | static int davinci_spi_setup(struct spi_device *spi) | 
|  | { | 
|  | int retval; | 
|  | struct davinci_spi *davinci_spi; | 
|  | struct davinci_spi_dma *davinci_spi_dma; | 
|  | struct device *sdev; | 
|  |  | 
|  | davinci_spi = spi_master_get_devdata(spi->master); | 
|  | sdev = davinci_spi->bitbang.master->dev.parent; | 
|  |  | 
|  | /* if bits per word length is zero then set it default 8 */ | 
|  | if (!spi->bits_per_word) | 
|  | spi->bits_per_word = 8; | 
|  |  | 
|  | davinci_spi->slave[spi->chip_select].cmd_to_write = 0; | 
|  |  | 
|  | if (use_dma && davinci_spi->dma_channels) { | 
|  | davinci_spi_dma = &davinci_spi->dma_channels[spi->chip_select]; | 
|  |  | 
|  | if ((davinci_spi_dma->dma_rx_channel == -1) | 
|  | || (davinci_spi_dma->dma_tx_channel == -1)) { | 
|  | retval = davinci_spi_request_dma(spi); | 
|  | if (retval < 0) | 
|  | return retval; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * SPI in DaVinci and DA8xx operate between | 
|  | * 600 KHz and 50 MHz | 
|  | */ | 
|  | if (spi->max_speed_hz < 600000 || spi->max_speed_hz > 50000000) { | 
|  | dev_dbg(sdev, "Operating frequency is not in acceptable " | 
|  | "range\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Set up SPIFMTn register, unique to this chipselect. | 
|  | * | 
|  | * NOTE: we could do all of these with one write.  Also, some | 
|  | * of the "version 2" features are found in chips that don't | 
|  | * support all of them... | 
|  | */ | 
|  | if (spi->mode & SPI_LSB_FIRST) | 
|  | set_fmt_bits(davinci_spi->base, SPIFMT_SHIFTDIR_MASK, | 
|  | spi->chip_select); | 
|  | else | 
|  | clear_fmt_bits(davinci_spi->base, SPIFMT_SHIFTDIR_MASK, | 
|  | spi->chip_select); | 
|  |  | 
|  | if (spi->mode & SPI_CPOL) | 
|  | set_fmt_bits(davinci_spi->base, SPIFMT_POLARITY_MASK, | 
|  | spi->chip_select); | 
|  | else | 
|  | clear_fmt_bits(davinci_spi->base, SPIFMT_POLARITY_MASK, | 
|  | spi->chip_select); | 
|  |  | 
|  | if (!(spi->mode & SPI_CPHA)) | 
|  | set_fmt_bits(davinci_spi->base, SPIFMT_PHASE_MASK, | 
|  | spi->chip_select); | 
|  | else | 
|  | clear_fmt_bits(davinci_spi->base, SPIFMT_PHASE_MASK, | 
|  | spi->chip_select); | 
|  |  | 
|  | /* | 
|  | * Version 1 hardware supports two basic SPI modes: | 
|  | *  - Standard SPI mode uses 4 pins, with chipselect | 
|  | *  - 3 pin SPI is a 4 pin variant without CS (SPI_NO_CS) | 
|  | *	(distinct from SPI_3WIRE, with just one data wire; | 
|  | *	or similar variants without MOSI or without MISO) | 
|  | * | 
|  | * Version 2 hardware supports an optional handshaking signal, | 
|  | * so it can support two more modes: | 
|  | *  - 5 pin SPI variant is standard SPI plus SPI_READY | 
|  | *  - 4 pin with enable is (SPI_READY | SPI_NO_CS) | 
|  | */ | 
|  |  | 
|  | if (davinci_spi->version == SPI_VERSION_2) { | 
|  | clear_fmt_bits(davinci_spi->base, SPIFMT_WDELAY_MASK, | 
|  | spi->chip_select); | 
|  | set_fmt_bits(davinci_spi->base, | 
|  | (davinci_spi->pdata->wdelay | 
|  | << SPIFMT_WDELAY_SHIFT) | 
|  | & SPIFMT_WDELAY_MASK, | 
|  | spi->chip_select); | 
|  |  | 
|  | if (davinci_spi->pdata->odd_parity) | 
|  | set_fmt_bits(davinci_spi->base, | 
|  | SPIFMT_ODD_PARITY_MASK, | 
|  | spi->chip_select); | 
|  | else | 
|  | clear_fmt_bits(davinci_spi->base, | 
|  | SPIFMT_ODD_PARITY_MASK, | 
|  | spi->chip_select); | 
|  |  | 
|  | if (davinci_spi->pdata->parity_enable) | 
|  | set_fmt_bits(davinci_spi->base, | 
|  | SPIFMT_PARITYENA_MASK, | 
|  | spi->chip_select); | 
|  | else | 
|  | clear_fmt_bits(davinci_spi->base, | 
|  | SPIFMT_PARITYENA_MASK, | 
|  | spi->chip_select); | 
|  |  | 
|  | if (davinci_spi->pdata->wait_enable) | 
|  | set_fmt_bits(davinci_spi->base, | 
|  | SPIFMT_WAITENA_MASK, | 
|  | spi->chip_select); | 
|  | else | 
|  | clear_fmt_bits(davinci_spi->base, | 
|  | SPIFMT_WAITENA_MASK, | 
|  | spi->chip_select); | 
|  |  | 
|  | if (davinci_spi->pdata->timer_disable) | 
|  | set_fmt_bits(davinci_spi->base, | 
|  | SPIFMT_DISTIMER_MASK, | 
|  | spi->chip_select); | 
|  | else | 
|  | clear_fmt_bits(davinci_spi->base, | 
|  | SPIFMT_DISTIMER_MASK, | 
|  | spi->chip_select); | 
|  | } | 
|  |  | 
|  | retval = davinci_spi_setup_transfer(spi, NULL); | 
|  |  | 
|  | return retval; | 
|  | } | 
|  |  | 
|  | static void davinci_spi_cleanup(struct spi_device *spi) | 
|  | { | 
|  | struct davinci_spi *davinci_spi = spi_master_get_devdata(spi->master); | 
|  | struct davinci_spi_dma *davinci_spi_dma; | 
|  |  | 
|  | davinci_spi_dma = &davinci_spi->dma_channels[spi->chip_select]; | 
|  |  | 
|  | if (use_dma && davinci_spi->dma_channels) { | 
|  | davinci_spi_dma = &davinci_spi->dma_channels[spi->chip_select]; | 
|  |  | 
|  | if ((davinci_spi_dma->dma_rx_channel != -1) | 
|  | && (davinci_spi_dma->dma_tx_channel != -1)) { | 
|  | edma_free_channel(davinci_spi_dma->dma_tx_channel); | 
|  | edma_free_channel(davinci_spi_dma->dma_rx_channel); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | static int davinci_spi_bufs_prep(struct spi_device *spi, | 
|  | struct davinci_spi *davinci_spi) | 
|  | { | 
|  | int op_mode = 0; | 
|  |  | 
|  | /* | 
|  | * REVISIT  unless devices disagree about SPI_LOOP or | 
|  | * SPI_READY (SPI_NO_CS only allows one device!), this | 
|  | * should not need to be done before each message... | 
|  | * optimize for both flags staying cleared. | 
|  | */ | 
|  |  | 
|  | op_mode = SPIPC0_DIFUN_MASK | 
|  | | SPIPC0_DOFUN_MASK | 
|  | | SPIPC0_CLKFUN_MASK; | 
|  | if (!(spi->mode & SPI_NO_CS)) | 
|  | op_mode |= 1 << spi->chip_select; | 
|  | if (spi->mode & SPI_READY) | 
|  | op_mode |= SPIPC0_SPIENA_MASK; | 
|  |  | 
|  | iowrite32(op_mode, davinci_spi->base + SPIPC0); | 
|  |  | 
|  | if (spi->mode & SPI_LOOP) | 
|  | set_io_bits(davinci_spi->base + SPIGCR1, | 
|  | SPIGCR1_LOOPBACK_MASK); | 
|  | else | 
|  | clear_io_bits(davinci_spi->base + SPIGCR1, | 
|  | SPIGCR1_LOOPBACK_MASK); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int davinci_spi_check_error(struct davinci_spi *davinci_spi, | 
|  | int int_status) | 
|  | { | 
|  | struct device *sdev = davinci_spi->bitbang.master->dev.parent; | 
|  |  | 
|  | if (int_status & SPIFLG_TIMEOUT_MASK) { | 
|  | dev_dbg(sdev, "SPI Time-out Error\n"); | 
|  | return -ETIMEDOUT; | 
|  | } | 
|  | if (int_status & SPIFLG_DESYNC_MASK) { | 
|  | dev_dbg(sdev, "SPI Desynchronization Error\n"); | 
|  | return -EIO; | 
|  | } | 
|  | if (int_status & SPIFLG_BITERR_MASK) { | 
|  | dev_dbg(sdev, "SPI Bit error\n"); | 
|  | return -EIO; | 
|  | } | 
|  |  | 
|  | if (davinci_spi->version == SPI_VERSION_2) { | 
|  | if (int_status & SPIFLG_DLEN_ERR_MASK) { | 
|  | dev_dbg(sdev, "SPI Data Length Error\n"); | 
|  | return -EIO; | 
|  | } | 
|  | if (int_status & SPIFLG_PARERR_MASK) { | 
|  | dev_dbg(sdev, "SPI Parity Error\n"); | 
|  | return -EIO; | 
|  | } | 
|  | if (int_status & SPIFLG_OVRRUN_MASK) { | 
|  | dev_dbg(sdev, "SPI Data Overrun error\n"); | 
|  | return -EIO; | 
|  | } | 
|  | if (int_status & SPIFLG_TX_INTR_MASK) { | 
|  | dev_dbg(sdev, "SPI TX intr bit set\n"); | 
|  | return -EIO; | 
|  | } | 
|  | if (int_status & SPIFLG_BUF_INIT_ACTIVE_MASK) { | 
|  | dev_dbg(sdev, "SPI Buffer Init Active\n"); | 
|  | return -EBUSY; | 
|  | } | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * davinci_spi_bufs - functions which will handle transfer data | 
|  | * @spi: spi device on which data transfer to be done | 
|  | * @t: spi transfer in which transfer info is filled | 
|  | * | 
|  | * This function will put data to be transferred into data register | 
|  | * of SPI controller and then wait until the completion will be marked | 
|  | * by the IRQ Handler. | 
|  | */ | 
|  | static int davinci_spi_bufs_pio(struct spi_device *spi, struct spi_transfer *t) | 
|  | { | 
|  | struct davinci_spi *davinci_spi; | 
|  | int int_status, count, ret; | 
|  | u8 conv, tmp; | 
|  | u32 tx_data, data1_reg_val; | 
|  | u32 buf_val, flg_val; | 
|  | struct davinci_spi_platform_data *pdata; | 
|  |  | 
|  | davinci_spi = spi_master_get_devdata(spi->master); | 
|  | pdata = davinci_spi->pdata; | 
|  |  | 
|  | davinci_spi->tx = t->tx_buf; | 
|  | davinci_spi->rx = t->rx_buf; | 
|  |  | 
|  | /* convert len to words based on bits_per_word */ | 
|  | conv = davinci_spi->slave[spi->chip_select].bytes_per_word; | 
|  | davinci_spi->count = t->len / conv; | 
|  |  | 
|  | INIT_COMPLETION(davinci_spi->done); | 
|  |  | 
|  | ret = davinci_spi_bufs_prep(spi, davinci_spi); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | /* Enable SPI */ | 
|  | set_io_bits(davinci_spi->base + SPIGCR1, SPIGCR1_SPIENA_MASK); | 
|  |  | 
|  | iowrite32(0 | (pdata->c2tdelay << SPI_C2TDELAY_SHIFT) | | 
|  | (pdata->t2cdelay << SPI_T2CDELAY_SHIFT), | 
|  | davinci_spi->base + SPIDELAY); | 
|  |  | 
|  | count = davinci_spi->count; | 
|  | data1_reg_val = pdata->cs_hold << SPIDAT1_CSHOLD_SHIFT; | 
|  | tmp = ~(0x1 << spi->chip_select); | 
|  |  | 
|  | clear_io_bits(davinci_spi->base + SPIDEF, ~tmp); | 
|  |  | 
|  | data1_reg_val |= tmp << SPIDAT1_CSNR_SHIFT; | 
|  |  | 
|  | while ((ioread32(davinci_spi->base + SPIBUF) | 
|  | & SPIBUF_RXEMPTY_MASK) == 0) | 
|  | cpu_relax(); | 
|  |  | 
|  | /* Determine the command to execute READ or WRITE */ | 
|  | if (t->tx_buf) { | 
|  | clear_io_bits(davinci_spi->base + SPIINT, SPIINT_MASKALL); | 
|  |  | 
|  | while (1) { | 
|  | tx_data = davinci_spi->get_tx(davinci_spi); | 
|  |  | 
|  | data1_reg_val &= ~(0xFFFF); | 
|  | data1_reg_val |= (0xFFFF & tx_data); | 
|  |  | 
|  | buf_val = ioread32(davinci_spi->base + SPIBUF); | 
|  | if ((buf_val & SPIBUF_TXFULL_MASK) == 0) { | 
|  | iowrite32(data1_reg_val, | 
|  | davinci_spi->base + SPIDAT1); | 
|  |  | 
|  | count--; | 
|  | } | 
|  | while (ioread32(davinci_spi->base + SPIBUF) | 
|  | & SPIBUF_RXEMPTY_MASK) | 
|  | cpu_relax(); | 
|  |  | 
|  | /* getting the returned byte */ | 
|  | if (t->rx_buf) { | 
|  | buf_val = ioread32(davinci_spi->base + SPIBUF); | 
|  | davinci_spi->get_rx(buf_val, davinci_spi); | 
|  | } | 
|  | if (count <= 0) | 
|  | break; | 
|  | } | 
|  | } else { | 
|  | if (pdata->poll_mode) { | 
|  | while (1) { | 
|  | /* keeps the serial clock going */ | 
|  | if ((ioread32(davinci_spi->base + SPIBUF) | 
|  | & SPIBUF_TXFULL_MASK) == 0) | 
|  | iowrite32(data1_reg_val, | 
|  | davinci_spi->base + SPIDAT1); | 
|  |  | 
|  | while (ioread32(davinci_spi->base + SPIBUF) & | 
|  | SPIBUF_RXEMPTY_MASK) | 
|  | cpu_relax(); | 
|  |  | 
|  | flg_val = ioread32(davinci_spi->base + SPIFLG); | 
|  | buf_val = ioread32(davinci_spi->base + SPIBUF); | 
|  |  | 
|  | davinci_spi->get_rx(buf_val, davinci_spi); | 
|  |  | 
|  | count--; | 
|  | if (count <= 0) | 
|  | break; | 
|  | } | 
|  | } else {	/* Receive in Interrupt mode */ | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < davinci_spi->count; i++) { | 
|  | set_io_bits(davinci_spi->base + SPIINT, | 
|  | SPIINT_BITERR_INTR | 
|  | | SPIINT_OVRRUN_INTR | 
|  | | SPIINT_RX_INTR); | 
|  |  | 
|  | iowrite32(data1_reg_val, | 
|  | davinci_spi->base + SPIDAT1); | 
|  |  | 
|  | while (ioread32(davinci_spi->base + SPIINT) & | 
|  | SPIINT_RX_INTR) | 
|  | cpu_relax(); | 
|  | } | 
|  | iowrite32((data1_reg_val & 0x0ffcffff), | 
|  | davinci_spi->base + SPIDAT1); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Check for bit error, desync error,parity error,timeout error and | 
|  | * receive overflow errors | 
|  | */ | 
|  | int_status = ioread32(davinci_spi->base + SPIFLG); | 
|  |  | 
|  | ret = davinci_spi_check_error(davinci_spi, int_status); | 
|  | if (ret != 0) | 
|  | return ret; | 
|  |  | 
|  | /* SPI Framework maintains the count only in bytes so convert back */ | 
|  | davinci_spi->count *= conv; | 
|  |  | 
|  | return t->len; | 
|  | } | 
|  |  | 
|  | #define DAVINCI_DMA_DATA_TYPE_S8	0x01 | 
|  | #define DAVINCI_DMA_DATA_TYPE_S16	0x02 | 
|  | #define DAVINCI_DMA_DATA_TYPE_S32	0x04 | 
|  |  | 
|  | static int davinci_spi_bufs_dma(struct spi_device *spi, struct spi_transfer *t) | 
|  | { | 
|  | struct davinci_spi *davinci_spi; | 
|  | int int_status = 0; | 
|  | int count, temp_count; | 
|  | u8 conv = 1; | 
|  | u8 tmp; | 
|  | u32 data1_reg_val; | 
|  | struct davinci_spi_dma *davinci_spi_dma; | 
|  | int word_len, data_type, ret; | 
|  | unsigned long tx_reg, rx_reg; | 
|  | struct davinci_spi_platform_data *pdata; | 
|  | struct device *sdev; | 
|  |  | 
|  | davinci_spi = spi_master_get_devdata(spi->master); | 
|  | pdata = davinci_spi->pdata; | 
|  | sdev = davinci_spi->bitbang.master->dev.parent; | 
|  |  | 
|  | davinci_spi_dma = &davinci_spi->dma_channels[spi->chip_select]; | 
|  |  | 
|  | tx_reg = (unsigned long)davinci_spi->pbase + SPIDAT1; | 
|  | rx_reg = (unsigned long)davinci_spi->pbase + SPIBUF; | 
|  |  | 
|  | davinci_spi->tx = t->tx_buf; | 
|  | davinci_spi->rx = t->rx_buf; | 
|  |  | 
|  | /* convert len to words based on bits_per_word */ | 
|  | conv = davinci_spi->slave[spi->chip_select].bytes_per_word; | 
|  | davinci_spi->count = t->len / conv; | 
|  |  | 
|  | INIT_COMPLETION(davinci_spi->done); | 
|  |  | 
|  | init_completion(&davinci_spi_dma->dma_rx_completion); | 
|  | init_completion(&davinci_spi_dma->dma_tx_completion); | 
|  |  | 
|  | word_len = conv * 8; | 
|  |  | 
|  | if (word_len <= 8) | 
|  | data_type = DAVINCI_DMA_DATA_TYPE_S8; | 
|  | else if (word_len <= 16) | 
|  | data_type = DAVINCI_DMA_DATA_TYPE_S16; | 
|  | else if (word_len <= 32) | 
|  | data_type = DAVINCI_DMA_DATA_TYPE_S32; | 
|  | else | 
|  | return -EINVAL; | 
|  |  | 
|  | ret = davinci_spi_bufs_prep(spi, davinci_spi); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | /* Put delay val if required */ | 
|  | iowrite32(0 | (pdata->c2tdelay << SPI_C2TDELAY_SHIFT) | | 
|  | (pdata->t2cdelay << SPI_T2CDELAY_SHIFT), | 
|  | davinci_spi->base + SPIDELAY); | 
|  |  | 
|  | count = davinci_spi->count;	/* the number of elements */ | 
|  | data1_reg_val = pdata->cs_hold << SPIDAT1_CSHOLD_SHIFT; | 
|  |  | 
|  | /* CS default = 0xFF */ | 
|  | tmp = ~(0x1 << spi->chip_select); | 
|  |  | 
|  | clear_io_bits(davinci_spi->base + SPIDEF, ~tmp); | 
|  |  | 
|  | data1_reg_val |= tmp << SPIDAT1_CSNR_SHIFT; | 
|  |  | 
|  | /* disable all interrupts for dma transfers */ | 
|  | clear_io_bits(davinci_spi->base + SPIINT, SPIINT_MASKALL); | 
|  | /* Disable SPI to write configuration bits in SPIDAT */ | 
|  | clear_io_bits(davinci_spi->base + SPIGCR1, SPIGCR1_SPIENA_MASK); | 
|  | iowrite32(data1_reg_val, davinci_spi->base + SPIDAT1); | 
|  | /* Enable SPI */ | 
|  | set_io_bits(davinci_spi->base + SPIGCR1, SPIGCR1_SPIENA_MASK); | 
|  |  | 
|  | while ((ioread32(davinci_spi->base + SPIBUF) | 
|  | & SPIBUF_RXEMPTY_MASK) == 0) | 
|  | cpu_relax(); | 
|  |  | 
|  |  | 
|  | if (t->tx_buf) { | 
|  | t->tx_dma = dma_map_single(&spi->dev, (void *)t->tx_buf, count, | 
|  | DMA_TO_DEVICE); | 
|  | if (dma_mapping_error(&spi->dev, t->tx_dma)) { | 
|  | dev_dbg(sdev, "Unable to DMA map a %d bytes" | 
|  | " TX buffer\n", count); | 
|  | return -ENOMEM; | 
|  | } | 
|  | temp_count = count; | 
|  | } else { | 
|  | /* We need TX clocking for RX transaction */ | 
|  | t->tx_dma = dma_map_single(&spi->dev, | 
|  | (void *)davinci_spi->tmp_buf, count + 1, | 
|  | DMA_TO_DEVICE); | 
|  | if (dma_mapping_error(&spi->dev, t->tx_dma)) { | 
|  | dev_dbg(sdev, "Unable to DMA map a %d bytes" | 
|  | " TX tmp buffer\n", count); | 
|  | return -ENOMEM; | 
|  | } | 
|  | temp_count = count + 1; | 
|  | } | 
|  |  | 
|  | edma_set_transfer_params(davinci_spi_dma->dma_tx_channel, | 
|  | data_type, temp_count, 1, 0, ASYNC); | 
|  | edma_set_dest(davinci_spi_dma->dma_tx_channel, tx_reg, INCR, W8BIT); | 
|  | edma_set_src(davinci_spi_dma->dma_tx_channel, t->tx_dma, INCR, W8BIT); | 
|  | edma_set_src_index(davinci_spi_dma->dma_tx_channel, data_type, 0); | 
|  | edma_set_dest_index(davinci_spi_dma->dma_tx_channel, 0, 0); | 
|  |  | 
|  | if (t->rx_buf) { | 
|  | /* initiate transaction */ | 
|  | iowrite32(data1_reg_val, davinci_spi->base + SPIDAT1); | 
|  |  | 
|  | t->rx_dma = dma_map_single(&spi->dev, (void *)t->rx_buf, count, | 
|  | DMA_FROM_DEVICE); | 
|  | if (dma_mapping_error(&spi->dev, t->rx_dma)) { | 
|  | dev_dbg(sdev, "Couldn't DMA map a %d bytes RX buffer\n", | 
|  | count); | 
|  | if (t->tx_buf != NULL) | 
|  | dma_unmap_single(NULL, t->tx_dma, | 
|  | count, DMA_TO_DEVICE); | 
|  | return -ENOMEM; | 
|  | } | 
|  | edma_set_transfer_params(davinci_spi_dma->dma_rx_channel, | 
|  | data_type, count, 1, 0, ASYNC); | 
|  | edma_set_src(davinci_spi_dma->dma_rx_channel, | 
|  | rx_reg, INCR, W8BIT); | 
|  | edma_set_dest(davinci_spi_dma->dma_rx_channel, | 
|  | t->rx_dma, INCR, W8BIT); | 
|  | edma_set_src_index(davinci_spi_dma->dma_rx_channel, 0, 0); | 
|  | edma_set_dest_index(davinci_spi_dma->dma_rx_channel, | 
|  | data_type, 0); | 
|  | } | 
|  |  | 
|  | if ((t->tx_buf) || (t->rx_buf)) | 
|  | edma_start(davinci_spi_dma->dma_tx_channel); | 
|  |  | 
|  | if (t->rx_buf) | 
|  | edma_start(davinci_spi_dma->dma_rx_channel); | 
|  |  | 
|  | if ((t->rx_buf) || (t->tx_buf)) | 
|  | davinci_spi_set_dma_req(spi, 1); | 
|  |  | 
|  | if (t->tx_buf) | 
|  | wait_for_completion_interruptible( | 
|  | &davinci_spi_dma->dma_tx_completion); | 
|  |  | 
|  | if (t->rx_buf) | 
|  | wait_for_completion_interruptible( | 
|  | &davinci_spi_dma->dma_rx_completion); | 
|  |  | 
|  | dma_unmap_single(NULL, t->tx_dma, temp_count, DMA_TO_DEVICE); | 
|  |  | 
|  | if (t->rx_buf) | 
|  | dma_unmap_single(NULL, t->rx_dma, count, DMA_FROM_DEVICE); | 
|  |  | 
|  | /* | 
|  | * Check for bit error, desync error,parity error,timeout error and | 
|  | * receive overflow errors | 
|  | */ | 
|  | int_status = ioread32(davinci_spi->base + SPIFLG); | 
|  |  | 
|  | ret = davinci_spi_check_error(davinci_spi, int_status); | 
|  | if (ret != 0) | 
|  | return ret; | 
|  |  | 
|  | /* SPI Framework maintains the count only in bytes so convert back */ | 
|  | davinci_spi->count *= conv; | 
|  |  | 
|  | return t->len; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * davinci_spi_irq - IRQ handler for DaVinci SPI | 
|  | * @irq: IRQ number for this SPI Master | 
|  | * @context_data: structure for SPI Master controller davinci_spi | 
|  | */ | 
|  | static irqreturn_t davinci_spi_irq(s32 irq, void *context_data) | 
|  | { | 
|  | struct davinci_spi *davinci_spi = context_data; | 
|  | u32 int_status, rx_data = 0; | 
|  | irqreturn_t ret = IRQ_NONE; | 
|  |  | 
|  | int_status = ioread32(davinci_spi->base + SPIFLG); | 
|  |  | 
|  | while ((int_status & SPIFLG_RX_INTR_MASK)) { | 
|  | if (likely(int_status & SPIFLG_RX_INTR_MASK)) { | 
|  | ret = IRQ_HANDLED; | 
|  |  | 
|  | rx_data = ioread32(davinci_spi->base + SPIBUF); | 
|  | davinci_spi->get_rx(rx_data, davinci_spi); | 
|  |  | 
|  | /* Disable Receive Interrupt */ | 
|  | iowrite32(~(SPIINT_RX_INTR | SPIINT_TX_INTR), | 
|  | davinci_spi->base + SPIINT); | 
|  | } else | 
|  | (void)davinci_spi_check_error(davinci_spi, int_status); | 
|  |  | 
|  | int_status = ioread32(davinci_spi->base + SPIFLG); | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * davinci_spi_probe - probe function for SPI Master Controller | 
|  | * @pdev: platform_device structure which contains plateform specific data | 
|  | */ | 
|  | static int davinci_spi_probe(struct platform_device *pdev) | 
|  | { | 
|  | struct spi_master *master; | 
|  | struct davinci_spi *davinci_spi; | 
|  | struct davinci_spi_platform_data *pdata; | 
|  | struct resource *r, *mem; | 
|  | resource_size_t dma_rx_chan = SPI_NO_RESOURCE; | 
|  | resource_size_t	dma_tx_chan = SPI_NO_RESOURCE; | 
|  | resource_size_t	dma_eventq = SPI_NO_RESOURCE; | 
|  | int i = 0, ret = 0; | 
|  |  | 
|  | pdata = pdev->dev.platform_data; | 
|  | if (pdata == NULL) { | 
|  | ret = -ENODEV; | 
|  | goto err; | 
|  | } | 
|  |  | 
|  | master = spi_alloc_master(&pdev->dev, sizeof(struct davinci_spi)); | 
|  | if (master == NULL) { | 
|  | ret = -ENOMEM; | 
|  | goto err; | 
|  | } | 
|  |  | 
|  | dev_set_drvdata(&pdev->dev, master); | 
|  |  | 
|  | davinci_spi = spi_master_get_devdata(master); | 
|  | if (davinci_spi == NULL) { | 
|  | ret = -ENOENT; | 
|  | goto free_master; | 
|  | } | 
|  |  | 
|  | r = platform_get_resource(pdev, IORESOURCE_MEM, 0); | 
|  | if (r == NULL) { | 
|  | ret = -ENOENT; | 
|  | goto free_master; | 
|  | } | 
|  |  | 
|  | davinci_spi->pbase = r->start; | 
|  | davinci_spi->region_size = resource_size(r); | 
|  | davinci_spi->pdata = pdata; | 
|  |  | 
|  | mem = request_mem_region(r->start, davinci_spi->region_size, | 
|  | pdev->name); | 
|  | if (mem == NULL) { | 
|  | ret = -EBUSY; | 
|  | goto free_master; | 
|  | } | 
|  |  | 
|  | davinci_spi->base = (struct davinci_spi_reg __iomem *) | 
|  | ioremap(r->start, davinci_spi->region_size); | 
|  | if (davinci_spi->base == NULL) { | 
|  | ret = -ENOMEM; | 
|  | goto release_region; | 
|  | } | 
|  |  | 
|  | davinci_spi->irq = platform_get_irq(pdev, 0); | 
|  | if (davinci_spi->irq <= 0) { | 
|  | ret = -EINVAL; | 
|  | goto unmap_io; | 
|  | } | 
|  |  | 
|  | ret = request_irq(davinci_spi->irq, davinci_spi_irq, IRQF_DISABLED, | 
|  | dev_name(&pdev->dev), davinci_spi); | 
|  | if (ret) | 
|  | goto unmap_io; | 
|  |  | 
|  | /* Allocate tmp_buf for tx_buf */ | 
|  | davinci_spi->tmp_buf = kzalloc(SPI_BUFSIZ, GFP_KERNEL); | 
|  | if (davinci_spi->tmp_buf == NULL) { | 
|  | ret = -ENOMEM; | 
|  | goto irq_free; | 
|  | } | 
|  |  | 
|  | davinci_spi->bitbang.master = spi_master_get(master); | 
|  | if (davinci_spi->bitbang.master == NULL) { | 
|  | ret = -ENODEV; | 
|  | goto free_tmp_buf; | 
|  | } | 
|  |  | 
|  | davinci_spi->clk = clk_get(&pdev->dev, NULL); | 
|  | if (IS_ERR(davinci_spi->clk)) { | 
|  | ret = -ENODEV; | 
|  | goto put_master; | 
|  | } | 
|  | clk_enable(davinci_spi->clk); | 
|  |  | 
|  |  | 
|  | master->bus_num = pdev->id; | 
|  | master->num_chipselect = pdata->num_chipselect; | 
|  | master->setup = davinci_spi_setup; | 
|  | master->cleanup = davinci_spi_cleanup; | 
|  |  | 
|  | davinci_spi->bitbang.chipselect = davinci_spi_chipselect; | 
|  | davinci_spi->bitbang.setup_transfer = davinci_spi_setup_transfer; | 
|  |  | 
|  | davinci_spi->version = pdata->version; | 
|  | use_dma = pdata->use_dma; | 
|  |  | 
|  | davinci_spi->bitbang.flags = SPI_NO_CS | SPI_LSB_FIRST | SPI_LOOP; | 
|  | if (davinci_spi->version == SPI_VERSION_2) | 
|  | davinci_spi->bitbang.flags |= SPI_READY; | 
|  |  | 
|  | if (use_dma) { | 
|  | r = platform_get_resource(pdev, IORESOURCE_DMA, 0); | 
|  | if (r) | 
|  | dma_rx_chan = r->start; | 
|  | r = platform_get_resource(pdev, IORESOURCE_DMA, 1); | 
|  | if (r) | 
|  | dma_tx_chan = r->start; | 
|  | r = platform_get_resource(pdev, IORESOURCE_DMA, 2); | 
|  | if (r) | 
|  | dma_eventq = r->start; | 
|  | } | 
|  |  | 
|  | if (!use_dma || | 
|  | dma_rx_chan == SPI_NO_RESOURCE || | 
|  | dma_tx_chan == SPI_NO_RESOURCE || | 
|  | dma_eventq	== SPI_NO_RESOURCE) { | 
|  | davinci_spi->bitbang.txrx_bufs = davinci_spi_bufs_pio; | 
|  | use_dma = 0; | 
|  | } else { | 
|  | davinci_spi->bitbang.txrx_bufs = davinci_spi_bufs_dma; | 
|  | davinci_spi->dma_channels = kzalloc(master->num_chipselect | 
|  | * sizeof(struct davinci_spi_dma), GFP_KERNEL); | 
|  | if (davinci_spi->dma_channels == NULL) { | 
|  | ret = -ENOMEM; | 
|  | goto free_clk; | 
|  | } | 
|  |  | 
|  | for (i = 0; i < master->num_chipselect; i++) { | 
|  | davinci_spi->dma_channels[i].dma_rx_channel = -1; | 
|  | davinci_spi->dma_channels[i].dma_rx_sync_dev = | 
|  | dma_rx_chan; | 
|  | davinci_spi->dma_channels[i].dma_tx_channel = -1; | 
|  | davinci_spi->dma_channels[i].dma_tx_sync_dev = | 
|  | dma_tx_chan; | 
|  | davinci_spi->dma_channels[i].eventq = dma_eventq; | 
|  | } | 
|  | dev_info(&pdev->dev, "DaVinci SPI driver in EDMA mode\n" | 
|  | "Using RX channel = %d , TX channel = %d and " | 
|  | "event queue = %d", dma_rx_chan, dma_tx_chan, | 
|  | dma_eventq); | 
|  | } | 
|  |  | 
|  | davinci_spi->get_rx = davinci_spi_rx_buf_u8; | 
|  | davinci_spi->get_tx = davinci_spi_tx_buf_u8; | 
|  |  | 
|  | init_completion(&davinci_spi->done); | 
|  |  | 
|  | /* Reset In/OUT SPI module */ | 
|  | iowrite32(0, davinci_spi->base + SPIGCR0); | 
|  | udelay(100); | 
|  | iowrite32(1, davinci_spi->base + SPIGCR0); | 
|  |  | 
|  | /* Clock internal */ | 
|  | if (davinci_spi->pdata->clk_internal) | 
|  | set_io_bits(davinci_spi->base + SPIGCR1, | 
|  | SPIGCR1_CLKMOD_MASK); | 
|  | else | 
|  | clear_io_bits(davinci_spi->base + SPIGCR1, | 
|  | SPIGCR1_CLKMOD_MASK); | 
|  |  | 
|  | /* master mode default */ | 
|  | set_io_bits(davinci_spi->base + SPIGCR1, SPIGCR1_MASTER_MASK); | 
|  |  | 
|  | if (davinci_spi->pdata->intr_level) | 
|  | iowrite32(SPI_INTLVL_1, davinci_spi->base + SPILVL); | 
|  | else | 
|  | iowrite32(SPI_INTLVL_0, davinci_spi->base + SPILVL); | 
|  |  | 
|  | ret = spi_bitbang_start(&davinci_spi->bitbang); | 
|  | if (ret) | 
|  | goto free_clk; | 
|  |  | 
|  | dev_info(&pdev->dev, "Controller at 0x%p \n", davinci_spi->base); | 
|  |  | 
|  | if (!pdata->poll_mode) | 
|  | dev_info(&pdev->dev, "Operating in interrupt mode" | 
|  | " using IRQ %d\n", davinci_spi->irq); | 
|  |  | 
|  | return ret; | 
|  |  | 
|  | free_clk: | 
|  | clk_disable(davinci_spi->clk); | 
|  | clk_put(davinci_spi->clk); | 
|  | put_master: | 
|  | spi_master_put(master); | 
|  | free_tmp_buf: | 
|  | kfree(davinci_spi->tmp_buf); | 
|  | irq_free: | 
|  | free_irq(davinci_spi->irq, davinci_spi); | 
|  | unmap_io: | 
|  | iounmap(davinci_spi->base); | 
|  | release_region: | 
|  | release_mem_region(davinci_spi->pbase, davinci_spi->region_size); | 
|  | free_master: | 
|  | kfree(master); | 
|  | err: | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * davinci_spi_remove - remove function for SPI Master Controller | 
|  | * @pdev: platform_device structure which contains plateform specific data | 
|  | * | 
|  | * This function will do the reverse action of davinci_spi_probe function | 
|  | * It will free the IRQ and SPI controller's memory region. | 
|  | * It will also call spi_bitbang_stop to destroy the work queue which was | 
|  | * created by spi_bitbang_start. | 
|  | */ | 
|  | static int __exit davinci_spi_remove(struct platform_device *pdev) | 
|  | { | 
|  | struct davinci_spi *davinci_spi; | 
|  | struct spi_master *master; | 
|  |  | 
|  | master = dev_get_drvdata(&pdev->dev); | 
|  | davinci_spi = spi_master_get_devdata(master); | 
|  |  | 
|  | spi_bitbang_stop(&davinci_spi->bitbang); | 
|  |  | 
|  | clk_disable(davinci_spi->clk); | 
|  | clk_put(davinci_spi->clk); | 
|  | spi_master_put(master); | 
|  | kfree(davinci_spi->tmp_buf); | 
|  | free_irq(davinci_spi->irq, davinci_spi); | 
|  | iounmap(davinci_spi->base); | 
|  | release_mem_region(davinci_spi->pbase, davinci_spi->region_size); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static struct platform_driver davinci_spi_driver = { | 
|  | .driver.name = "spi_davinci", | 
|  | .remove = __exit_p(davinci_spi_remove), | 
|  | }; | 
|  |  | 
|  | static int __init davinci_spi_init(void) | 
|  | { | 
|  | return platform_driver_probe(&davinci_spi_driver, davinci_spi_probe); | 
|  | } | 
|  | module_init(davinci_spi_init); | 
|  |  | 
|  | static void __exit davinci_spi_exit(void) | 
|  | { | 
|  | platform_driver_unregister(&davinci_spi_driver); | 
|  | } | 
|  | module_exit(davinci_spi_exit); | 
|  |  | 
|  | MODULE_DESCRIPTION("TI DaVinci SPI Master Controller Driver"); | 
|  | MODULE_LICENSE("GPL"); |