|  | /* | 
|  | * Watchdog driver for SBC-FITPC2 board | 
|  | * | 
|  | * Author: Denis Turischev <denis@compulab.co.il> | 
|  | * | 
|  | * Adapted from the IXP2000 watchdog driver by Deepak Saxena. | 
|  | * | 
|  | * This file is licensed under  the terms of the GNU General Public | 
|  | * License version 2. This program is licensed "as is" without any | 
|  | * warranty of any kind, whether express or implied. | 
|  | */ | 
|  |  | 
|  | #define pr_fmt(fmt) KBUILD_MODNAME " WATCHDOG: " fmt | 
|  |  | 
|  | #include <linux/module.h> | 
|  | #include <linux/types.h> | 
|  | #include <linux/miscdevice.h> | 
|  | #include <linux/watchdog.h> | 
|  | #include <linux/ioport.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/fs.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/moduleparam.h> | 
|  | #include <linux/dmi.h> | 
|  | #include <linux/io.h> | 
|  | #include <linux/uaccess.h> | 
|  |  | 
|  | #include <asm/system.h> | 
|  |  | 
|  | static int nowayout = WATCHDOG_NOWAYOUT; | 
|  | static unsigned int margin = 60;	/* (secs) Default is 1 minute */ | 
|  | static unsigned long wdt_status; | 
|  | static DEFINE_MUTEX(wdt_lock); | 
|  |  | 
|  | #define WDT_IN_USE		0 | 
|  | #define WDT_OK_TO_CLOSE		1 | 
|  |  | 
|  | #define COMMAND_PORT		0x4c | 
|  | #define DATA_PORT		0x48 | 
|  |  | 
|  | #define IFACE_ON_COMMAND	1 | 
|  | #define REBOOT_COMMAND		2 | 
|  |  | 
|  | #define WATCHDOG_NAME 		"SBC-FITPC2 Watchdog" | 
|  |  | 
|  | static void wdt_send_data(unsigned char command, unsigned char data) | 
|  | { | 
|  | outb(data, DATA_PORT); | 
|  | msleep(200); | 
|  | outb(command, COMMAND_PORT); | 
|  | msleep(100); | 
|  | } | 
|  |  | 
|  | static void wdt_enable(void) | 
|  | { | 
|  | mutex_lock(&wdt_lock); | 
|  | wdt_send_data(IFACE_ON_COMMAND, 1); | 
|  | wdt_send_data(REBOOT_COMMAND, margin); | 
|  | mutex_unlock(&wdt_lock); | 
|  | } | 
|  |  | 
|  | static void wdt_disable(void) | 
|  | { | 
|  | mutex_lock(&wdt_lock); | 
|  | wdt_send_data(IFACE_ON_COMMAND, 0); | 
|  | wdt_send_data(REBOOT_COMMAND, 0); | 
|  | mutex_unlock(&wdt_lock); | 
|  | } | 
|  |  | 
|  | static int fitpc2_wdt_open(struct inode *inode, struct file *file) | 
|  | { | 
|  | if (test_and_set_bit(WDT_IN_USE, &wdt_status)) | 
|  | return -EBUSY; | 
|  |  | 
|  | clear_bit(WDT_OK_TO_CLOSE, &wdt_status); | 
|  |  | 
|  | wdt_enable(); | 
|  |  | 
|  | return nonseekable_open(inode, file); | 
|  | } | 
|  |  | 
|  | static ssize_t fitpc2_wdt_write(struct file *file, const char *data, | 
|  | size_t len, loff_t *ppos) | 
|  | { | 
|  | size_t i; | 
|  |  | 
|  | if (!len) | 
|  | return 0; | 
|  |  | 
|  | if (nowayout) { | 
|  | len = 0; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | clear_bit(WDT_OK_TO_CLOSE, &wdt_status); | 
|  |  | 
|  | for (i = 0; i != len; i++) { | 
|  | char c; | 
|  |  | 
|  | if (get_user(c, data + i)) | 
|  | return -EFAULT; | 
|  |  | 
|  | if (c == 'V') | 
|  | set_bit(WDT_OK_TO_CLOSE, &wdt_status); | 
|  | } | 
|  |  | 
|  | out: | 
|  | wdt_enable(); | 
|  |  | 
|  | return len; | 
|  | } | 
|  |  | 
|  |  | 
|  | static const struct watchdog_info ident = { | 
|  | .options	= WDIOF_MAGICCLOSE | WDIOF_SETTIMEOUT | | 
|  | WDIOF_KEEPALIVEPING, | 
|  | .identity	= WATCHDOG_NAME, | 
|  | }; | 
|  |  | 
|  |  | 
|  | static long fitpc2_wdt_ioctl(struct file *file, unsigned int cmd, | 
|  | unsigned long arg) | 
|  | { | 
|  | int ret = -ENOTTY; | 
|  | int time; | 
|  |  | 
|  | switch (cmd) { | 
|  | case WDIOC_GETSUPPORT: | 
|  | ret = copy_to_user((struct watchdog_info *)arg, &ident, | 
|  | sizeof(ident)) ? -EFAULT : 0; | 
|  | break; | 
|  |  | 
|  | case WDIOC_GETSTATUS: | 
|  | ret = put_user(0, (int *)arg); | 
|  | break; | 
|  |  | 
|  | case WDIOC_GETBOOTSTATUS: | 
|  | ret = put_user(0, (int *)arg); | 
|  | break; | 
|  |  | 
|  | case WDIOC_KEEPALIVE: | 
|  | wdt_enable(); | 
|  | ret = 0; | 
|  | break; | 
|  |  | 
|  | case WDIOC_SETTIMEOUT: | 
|  | ret = get_user(time, (int *)arg); | 
|  | if (ret) | 
|  | break; | 
|  |  | 
|  | if (time < 31 || time > 255) { | 
|  | ret = -EINVAL; | 
|  | break; | 
|  | } | 
|  |  | 
|  | margin = time; | 
|  | wdt_enable(); | 
|  | /* Fall through */ | 
|  |  | 
|  | case WDIOC_GETTIMEOUT: | 
|  | ret = put_user(margin, (int *)arg); | 
|  | break; | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int fitpc2_wdt_release(struct inode *inode, struct file *file) | 
|  | { | 
|  | if (test_bit(WDT_OK_TO_CLOSE, &wdt_status)) { | 
|  | wdt_disable(); | 
|  | pr_info("Device disabled\n"); | 
|  | } else { | 
|  | pr_warning("Device closed unexpectedly -" | 
|  | " timer will not stop\n"); | 
|  | wdt_enable(); | 
|  | } | 
|  |  | 
|  | clear_bit(WDT_IN_USE, &wdt_status); | 
|  | clear_bit(WDT_OK_TO_CLOSE, &wdt_status); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | static const struct file_operations fitpc2_wdt_fops = { | 
|  | .owner		= THIS_MODULE, | 
|  | .llseek		= no_llseek, | 
|  | .write		= fitpc2_wdt_write, | 
|  | .unlocked_ioctl	= fitpc2_wdt_ioctl, | 
|  | .open		= fitpc2_wdt_open, | 
|  | .release	= fitpc2_wdt_release, | 
|  | }; | 
|  |  | 
|  | static struct miscdevice fitpc2_wdt_miscdev = { | 
|  | .minor		= WATCHDOG_MINOR, | 
|  | .name		= "watchdog", | 
|  | .fops		= &fitpc2_wdt_fops, | 
|  | }; | 
|  |  | 
|  | static int __init fitpc2_wdt_init(void) | 
|  | { | 
|  | int err; | 
|  |  | 
|  | if (!strstr(dmi_get_system_info(DMI_BOARD_NAME), "SBC-FITPC2")) | 
|  | return -ENODEV; | 
|  |  | 
|  | pr_info("%s found\n", dmi_get_system_info(DMI_BOARD_NAME)); | 
|  |  | 
|  | if (!request_region(COMMAND_PORT, 1, WATCHDOG_NAME)) { | 
|  | pr_err("I/O address 0x%04x already in use\n", COMMAND_PORT); | 
|  | return -EIO; | 
|  | } | 
|  |  | 
|  | if (!request_region(DATA_PORT, 1, WATCHDOG_NAME)) { | 
|  | pr_err("I/O address 0x%04x already in use\n", DATA_PORT); | 
|  | err = -EIO; | 
|  | goto err_data_port; | 
|  | } | 
|  |  | 
|  | if (margin < 31 || margin > 255) { | 
|  | pr_err("margin must be in range 31 - 255" | 
|  | " seconds, you tried to set %d\n", margin); | 
|  | err = -EINVAL; | 
|  | goto err_margin; | 
|  | } | 
|  |  | 
|  | err = misc_register(&fitpc2_wdt_miscdev); | 
|  | if (err) { | 
|  | pr_err("cannot register miscdev on minor=%d (err=%d)\n", | 
|  | WATCHDOG_MINOR, err); | 
|  | goto err_margin; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | err_margin: | 
|  | release_region(DATA_PORT, 1); | 
|  | err_data_port: | 
|  | release_region(COMMAND_PORT, 1); | 
|  |  | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static void __exit fitpc2_wdt_exit(void) | 
|  | { | 
|  | misc_deregister(&fitpc2_wdt_miscdev); | 
|  | release_region(DATA_PORT, 1); | 
|  | release_region(COMMAND_PORT, 1); | 
|  | } | 
|  |  | 
|  | module_init(fitpc2_wdt_init); | 
|  | module_exit(fitpc2_wdt_exit); | 
|  |  | 
|  | MODULE_AUTHOR("Denis Turischev <denis@compulab.co.il>"); | 
|  | MODULE_DESCRIPTION("SBC-FITPC2 Watchdog"); | 
|  |  | 
|  | module_param(margin, int, 0); | 
|  | MODULE_PARM_DESC(margin, "Watchdog margin in seconds (default 60s)"); | 
|  |  | 
|  | module_param(nowayout, int, 0); | 
|  | MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started"); | 
|  |  | 
|  | MODULE_LICENSE("GPL"); | 
|  | MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); | 
|  |  |