|  | /* | 
|  | *   This program is free software; you can redistribute it and/or modify | 
|  | *   it under the terms of the GNU General Public License as published by | 
|  | *   the Free Software Foundation; either version 2 of the License, or | 
|  | *   (at your option) any later version. | 
|  | * | 
|  | *   This program is distributed in the hope that it will be useful, | 
|  | *   but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
|  | *   GNU General Public License for more details. | 
|  | * | 
|  | *   You should have received a copy of the GNU General Public License | 
|  | *   along with this program; if not, write to the Free Software | 
|  | *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA | 
|  | * | 
|  | */ | 
|  |  | 
|  | #include <linux/init.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/usb.h> | 
|  | #include <linux/usb/audio.h> | 
|  | #include <linux/usb/audio-v2.h> | 
|  |  | 
|  | #include <sound/core.h> | 
|  | #include <sound/pcm.h> | 
|  |  | 
|  | #include "usbaudio.h" | 
|  | #include "card.h" | 
|  | #include "proc.h" | 
|  | #include "quirks.h" | 
|  | #include "endpoint.h" | 
|  | #include "urb.h" | 
|  | #include "pcm.h" | 
|  | #include "helper.h" | 
|  | #include "format.h" | 
|  |  | 
|  | /* | 
|  | * free a substream | 
|  | */ | 
|  | static void free_substream(struct snd_usb_substream *subs) | 
|  | { | 
|  | struct list_head *p, *n; | 
|  |  | 
|  | if (!subs->num_formats) | 
|  | return; /* not initialized */ | 
|  | list_for_each_safe(p, n, &subs->fmt_list) { | 
|  | struct audioformat *fp = list_entry(p, struct audioformat, list); | 
|  | kfree(fp->rate_table); | 
|  | kfree(fp); | 
|  | } | 
|  | kfree(subs->rate_list.list); | 
|  | } | 
|  |  | 
|  |  | 
|  | /* | 
|  | * free a usb stream instance | 
|  | */ | 
|  | static void snd_usb_audio_stream_free(struct snd_usb_stream *stream) | 
|  | { | 
|  | free_substream(&stream->substream[0]); | 
|  | free_substream(&stream->substream[1]); | 
|  | list_del(&stream->list); | 
|  | kfree(stream); | 
|  | } | 
|  |  | 
|  | static void snd_usb_audio_pcm_free(struct snd_pcm *pcm) | 
|  | { | 
|  | struct snd_usb_stream *stream = pcm->private_data; | 
|  | if (stream) { | 
|  | stream->pcm = NULL; | 
|  | snd_usb_audio_stream_free(stream); | 
|  | } | 
|  | } | 
|  |  | 
|  |  | 
|  | /* | 
|  | * add this endpoint to the chip instance. | 
|  | * if a stream with the same endpoint already exists, append to it. | 
|  | * if not, create a new pcm stream. | 
|  | */ | 
|  | int snd_usb_add_audio_endpoint(struct snd_usb_audio *chip, int stream, struct audioformat *fp) | 
|  | { | 
|  | struct list_head *p; | 
|  | struct snd_usb_stream *as; | 
|  | struct snd_usb_substream *subs; | 
|  | struct snd_pcm *pcm; | 
|  | int err; | 
|  |  | 
|  | list_for_each(p, &chip->pcm_list) { | 
|  | as = list_entry(p, struct snd_usb_stream, list); | 
|  | if (as->fmt_type != fp->fmt_type) | 
|  | continue; | 
|  | subs = &as->substream[stream]; | 
|  | if (!subs->endpoint) | 
|  | continue; | 
|  | if (subs->endpoint == fp->endpoint) { | 
|  | list_add_tail(&fp->list, &subs->fmt_list); | 
|  | subs->num_formats++; | 
|  | subs->formats |= fp->formats; | 
|  | return 0; | 
|  | } | 
|  | } | 
|  | /* look for an empty stream */ | 
|  | list_for_each(p, &chip->pcm_list) { | 
|  | as = list_entry(p, struct snd_usb_stream, list); | 
|  | if (as->fmt_type != fp->fmt_type) | 
|  | continue; | 
|  | subs = &as->substream[stream]; | 
|  | if (subs->endpoint) | 
|  | continue; | 
|  | err = snd_pcm_new_stream(as->pcm, stream, 1); | 
|  | if (err < 0) | 
|  | return err; | 
|  | snd_usb_init_substream(as, stream, fp); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* create a new pcm */ | 
|  | as = kzalloc(sizeof(*as), GFP_KERNEL); | 
|  | if (!as) | 
|  | return -ENOMEM; | 
|  | as->pcm_index = chip->pcm_devs; | 
|  | as->chip = chip; | 
|  | as->fmt_type = fp->fmt_type; | 
|  | err = snd_pcm_new(chip->card, "USB Audio", chip->pcm_devs, | 
|  | stream == SNDRV_PCM_STREAM_PLAYBACK ? 1 : 0, | 
|  | stream == SNDRV_PCM_STREAM_PLAYBACK ? 0 : 1, | 
|  | &pcm); | 
|  | if (err < 0) { | 
|  | kfree(as); | 
|  | return err; | 
|  | } | 
|  | as->pcm = pcm; | 
|  | pcm->private_data = as; | 
|  | pcm->private_free = snd_usb_audio_pcm_free; | 
|  | pcm->info_flags = 0; | 
|  | if (chip->pcm_devs > 0) | 
|  | sprintf(pcm->name, "USB Audio #%d", chip->pcm_devs); | 
|  | else | 
|  | strcpy(pcm->name, "USB Audio"); | 
|  |  | 
|  | snd_usb_init_substream(as, stream, fp); | 
|  |  | 
|  | list_add(&as->list, &chip->pcm_list); | 
|  | chip->pcm_devs++; | 
|  |  | 
|  | snd_usb_proc_pcm_format_add(as); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int parse_uac_endpoint_attributes(struct snd_usb_audio *chip, | 
|  | struct usb_host_interface *alts, | 
|  | int protocol, int iface_no) | 
|  | { | 
|  | /* parsed with a v1 header here. that's ok as we only look at the | 
|  | * header first which is the same for both versions */ | 
|  | struct uac_iso_endpoint_descriptor *csep; | 
|  | struct usb_interface_descriptor *altsd = get_iface_desc(alts); | 
|  | int attributes = 0; | 
|  |  | 
|  | csep = snd_usb_find_desc(alts->endpoint[0].extra, alts->endpoint[0].extralen, NULL, USB_DT_CS_ENDPOINT); | 
|  |  | 
|  | /* Creamware Noah has this descriptor after the 2nd endpoint */ | 
|  | if (!csep && altsd->bNumEndpoints >= 2) | 
|  | csep = snd_usb_find_desc(alts->endpoint[1].extra, alts->endpoint[1].extralen, NULL, USB_DT_CS_ENDPOINT); | 
|  |  | 
|  | if (!csep || csep->bLength < 7 || | 
|  | csep->bDescriptorSubtype != UAC_EP_GENERAL) { | 
|  | snd_printk(KERN_WARNING "%d:%u:%d : no or invalid" | 
|  | " class specific endpoint descriptor\n", | 
|  | chip->dev->devnum, iface_no, | 
|  | altsd->bAlternateSetting); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | if (protocol == UAC_VERSION_1) { | 
|  | attributes = csep->bmAttributes; | 
|  | } else { | 
|  | struct uac2_iso_endpoint_descriptor *csep2 = | 
|  | (struct uac2_iso_endpoint_descriptor *) csep; | 
|  |  | 
|  | attributes = csep->bmAttributes & UAC_EP_CS_ATTR_FILL_MAX; | 
|  |  | 
|  | /* emulate the endpoint attributes of a v1 device */ | 
|  | if (csep2->bmControls & UAC2_CONTROL_PITCH) | 
|  | attributes |= UAC_EP_CS_ATTR_PITCH_CONTROL; | 
|  | } | 
|  |  | 
|  | return attributes; | 
|  | } | 
|  |  | 
|  | int snd_usb_parse_audio_endpoints(struct snd_usb_audio *chip, int iface_no) | 
|  | { | 
|  | struct usb_device *dev; | 
|  | struct usb_interface *iface; | 
|  | struct usb_host_interface *alts; | 
|  | struct usb_interface_descriptor *altsd; | 
|  | int i, altno, err, stream; | 
|  | int format = 0, num_channels = 0; | 
|  | struct audioformat *fp = NULL; | 
|  | int num, protocol; | 
|  | struct uac_format_type_i_continuous_descriptor *fmt; | 
|  |  | 
|  | dev = chip->dev; | 
|  |  | 
|  | /* parse the interface's altsettings */ | 
|  | iface = usb_ifnum_to_if(dev, iface_no); | 
|  |  | 
|  | num = iface->num_altsetting; | 
|  |  | 
|  | /* | 
|  | * Dallas DS4201 workaround: It presents 5 altsettings, but the last | 
|  | * one misses syncpipe, and does not produce any sound. | 
|  | */ | 
|  | if (chip->usb_id == USB_ID(0x04fa, 0x4201)) | 
|  | num = 4; | 
|  |  | 
|  | for (i = 0; i < num; i++) { | 
|  | alts = &iface->altsetting[i]; | 
|  | altsd = get_iface_desc(alts); | 
|  | protocol = altsd->bInterfaceProtocol; | 
|  | /* skip invalid one */ | 
|  | if ((altsd->bInterfaceClass != USB_CLASS_AUDIO && | 
|  | altsd->bInterfaceClass != USB_CLASS_VENDOR_SPEC) || | 
|  | (altsd->bInterfaceSubClass != USB_SUBCLASS_AUDIOSTREAMING && | 
|  | altsd->bInterfaceSubClass != USB_SUBCLASS_VENDOR_SPEC) || | 
|  | altsd->bNumEndpoints < 1 || | 
|  | le16_to_cpu(get_endpoint(alts, 0)->wMaxPacketSize) == 0) | 
|  | continue; | 
|  | /* must be isochronous */ | 
|  | if ((get_endpoint(alts, 0)->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) != | 
|  | USB_ENDPOINT_XFER_ISOC) | 
|  | continue; | 
|  | /* check direction */ | 
|  | stream = (get_endpoint(alts, 0)->bEndpointAddress & USB_DIR_IN) ? | 
|  | SNDRV_PCM_STREAM_CAPTURE : SNDRV_PCM_STREAM_PLAYBACK; | 
|  | altno = altsd->bAlternateSetting; | 
|  |  | 
|  | if (snd_usb_apply_interface_quirk(chip, iface_no, altno)) | 
|  | continue; | 
|  |  | 
|  | /* get audio formats */ | 
|  | switch (protocol) { | 
|  | case UAC_VERSION_1: { | 
|  | struct uac_as_header_descriptor_v1 *as = | 
|  | snd_usb_find_csint_desc(alts->extra, alts->extralen, NULL, UAC_AS_GENERAL); | 
|  |  | 
|  | if (!as) { | 
|  | snd_printk(KERN_ERR "%d:%u:%d : UAC_AS_GENERAL descriptor not found\n", | 
|  | dev->devnum, iface_no, altno); | 
|  | continue; | 
|  | } | 
|  |  | 
|  | if (as->bLength < sizeof(*as)) { | 
|  | snd_printk(KERN_ERR "%d:%u:%d : invalid UAC_AS_GENERAL desc\n", | 
|  | dev->devnum, iface_no, altno); | 
|  | continue; | 
|  | } | 
|  |  | 
|  | format = le16_to_cpu(as->wFormatTag); /* remember the format value */ | 
|  | break; | 
|  | } | 
|  |  | 
|  | case UAC_VERSION_2: { | 
|  | struct uac_as_header_descriptor_v2 *as = | 
|  | snd_usb_find_csint_desc(alts->extra, alts->extralen, NULL, UAC_AS_GENERAL); | 
|  |  | 
|  | if (!as) { | 
|  | snd_printk(KERN_ERR "%d:%u:%d : UAC_AS_GENERAL descriptor not found\n", | 
|  | dev->devnum, iface_no, altno); | 
|  | continue; | 
|  | } | 
|  |  | 
|  | if (as->bLength < sizeof(*as)) { | 
|  | snd_printk(KERN_ERR "%d:%u:%d : invalid UAC_AS_GENERAL desc\n", | 
|  | dev->devnum, iface_no, altno); | 
|  | continue; | 
|  | } | 
|  |  | 
|  | num_channels = as->bNrChannels; | 
|  | format = le32_to_cpu(as->bmFormats); | 
|  |  | 
|  | break; | 
|  | } | 
|  |  | 
|  | default: | 
|  | snd_printk(KERN_ERR "%d:%u:%d : unknown interface protocol %04x\n", | 
|  | dev->devnum, iface_no, altno, protocol); | 
|  | continue; | 
|  | } | 
|  |  | 
|  | /* get format type */ | 
|  | fmt = snd_usb_find_csint_desc(alts->extra, alts->extralen, NULL, UAC_FORMAT_TYPE); | 
|  | if (!fmt) { | 
|  | snd_printk(KERN_ERR "%d:%u:%d : no UAC_FORMAT_TYPE desc\n", | 
|  | dev->devnum, iface_no, altno); | 
|  | continue; | 
|  | } | 
|  | if (((protocol == UAC_VERSION_1) && (fmt->bLength < 8)) || | 
|  | ((protocol == UAC_VERSION_2) && (fmt->bLength != 6))) { | 
|  | snd_printk(KERN_ERR "%d:%u:%d : invalid UAC_FORMAT_TYPE desc\n", | 
|  | dev->devnum, iface_no, altno); | 
|  | continue; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Blue Microphones workaround: The last altsetting is identical | 
|  | * with the previous one, except for a larger packet size, but | 
|  | * is actually a mislabeled two-channel setting; ignore it. | 
|  | */ | 
|  | if (fmt->bNrChannels == 1 && | 
|  | fmt->bSubframeSize == 2 && | 
|  | altno == 2 && num == 3 && | 
|  | fp && fp->altsetting == 1 && fp->channels == 1 && | 
|  | fp->formats == SNDRV_PCM_FMTBIT_S16_LE && | 
|  | protocol == UAC_VERSION_1 && | 
|  | le16_to_cpu(get_endpoint(alts, 0)->wMaxPacketSize) == | 
|  | fp->maxpacksize * 2) | 
|  | continue; | 
|  |  | 
|  | fp = kzalloc(sizeof(*fp), GFP_KERNEL); | 
|  | if (! fp) { | 
|  | snd_printk(KERN_ERR "cannot malloc\n"); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | fp->iface = iface_no; | 
|  | fp->altsetting = altno; | 
|  | fp->altset_idx = i; | 
|  | fp->endpoint = get_endpoint(alts, 0)->bEndpointAddress; | 
|  | fp->ep_attr = get_endpoint(alts, 0)->bmAttributes; | 
|  | fp->datainterval = snd_usb_parse_datainterval(chip, alts); | 
|  | fp->maxpacksize = le16_to_cpu(get_endpoint(alts, 0)->wMaxPacketSize); | 
|  | /* num_channels is only set for v2 interfaces */ | 
|  | fp->channels = num_channels; | 
|  | if (snd_usb_get_speed(dev) == USB_SPEED_HIGH) | 
|  | fp->maxpacksize = (((fp->maxpacksize >> 11) & 3) + 1) | 
|  | * (fp->maxpacksize & 0x7ff); | 
|  | fp->attributes = parse_uac_endpoint_attributes(chip, alts, protocol, iface_no); | 
|  |  | 
|  | /* some quirks for attributes here */ | 
|  |  | 
|  | switch (chip->usb_id) { | 
|  | case USB_ID(0x0a92, 0x0053): /* AudioTrak Optoplay */ | 
|  | /* Optoplay sets the sample rate attribute although | 
|  | * it seems not supporting it in fact. | 
|  | */ | 
|  | fp->attributes &= ~UAC_EP_CS_ATTR_SAMPLE_RATE; | 
|  | break; | 
|  | case USB_ID(0x041e, 0x3020): /* Creative SB Audigy 2 NX */ | 
|  | case USB_ID(0x0763, 0x2003): /* M-Audio Audiophile USB */ | 
|  | case USB_ID(0x0763, 0x2080): /* M-Audio Fast Track Ultra 8 */ | 
|  | case USB_ID(0x0763, 0x2081): /* M-Audio Fast Track Ultra 8R */ | 
|  | /* doesn't set the sample rate attribute, but supports it */ | 
|  | fp->attributes |= UAC_EP_CS_ATTR_SAMPLE_RATE; | 
|  | break; | 
|  | case USB_ID(0x047f, 0x0ca1): /* plantronics headset */ | 
|  | case USB_ID(0x077d, 0x07af): /* Griffin iMic (note that there is | 
|  | an older model 77d:223) */ | 
|  | /* | 
|  | * plantronics headset and Griffin iMic have set adaptive-in | 
|  | * although it's really not... | 
|  | */ | 
|  | fp->ep_attr &= ~USB_ENDPOINT_SYNCTYPE; | 
|  | if (stream == SNDRV_PCM_STREAM_PLAYBACK) | 
|  | fp->ep_attr |= USB_ENDPOINT_SYNC_ADAPTIVE; | 
|  | else | 
|  | fp->ep_attr |= USB_ENDPOINT_SYNC_SYNC; | 
|  | break; | 
|  | } | 
|  |  | 
|  | /* ok, let's parse further... */ | 
|  | if (snd_usb_parse_audio_format(chip, fp, format, fmt, stream, alts) < 0) { | 
|  | kfree(fp->rate_table); | 
|  | kfree(fp); | 
|  | continue; | 
|  | } | 
|  |  | 
|  | snd_printdd(KERN_INFO "%d:%u:%d: add audio endpoint %#x\n", dev->devnum, iface_no, altno, fp->endpoint); | 
|  | err = snd_usb_add_audio_endpoint(chip, stream, fp); | 
|  | if (err < 0) { | 
|  | kfree(fp->rate_table); | 
|  | kfree(fp); | 
|  | return err; | 
|  | } | 
|  | /* try to set the interface... */ | 
|  | usb_set_interface(chip->dev, iface_no, altno); | 
|  | snd_usb_init_pitch(chip, iface_no, alts, fp); | 
|  | snd_usb_init_sample_rate(chip, iface_no, alts, fp, fp->rate_max); | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  |