|  | /* | 
|  | Copyright (C) 2004 - 2007 rt2x00 SourceForge Project | 
|  | <http://rt2x00.serialmonkey.com> | 
|  |  | 
|  | This program is free software; you can redistribute it and/or modify | 
|  | it under the terms of the GNU General Public License as published by | 
|  | the Free Software Foundation; either version 2 of the License, or | 
|  | (at your option) any later version. | 
|  |  | 
|  | This program is distributed in the hope that it will be useful, | 
|  | but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | 
|  | GNU General Public License for more details. | 
|  |  | 
|  | You should have received a copy of the GNU General Public License | 
|  | along with this program; if not, write to the | 
|  | Free Software Foundation, Inc., | 
|  | 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. | 
|  | */ | 
|  |  | 
|  | /* | 
|  | Module: rt2400pci | 
|  | Abstract: rt2400pci device specific routines. | 
|  | Supported chipsets: RT2460. | 
|  | */ | 
|  |  | 
|  | #include <linux/delay.h> | 
|  | #include <linux/etherdevice.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/pci.h> | 
|  | #include <linux/eeprom_93cx6.h> | 
|  |  | 
|  | #include "rt2x00.h" | 
|  | #include "rt2x00pci.h" | 
|  | #include "rt2400pci.h" | 
|  |  | 
|  | /* | 
|  | * Register access. | 
|  | * All access to the CSR registers will go through the methods | 
|  | * rt2x00pci_register_read and rt2x00pci_register_write. | 
|  | * BBP and RF register require indirect register access, | 
|  | * and use the CSR registers BBPCSR and RFCSR to achieve this. | 
|  | * These indirect registers work with busy bits, | 
|  | * and we will try maximal REGISTER_BUSY_COUNT times to access | 
|  | * the register while taking a REGISTER_BUSY_DELAY us delay | 
|  | * between each attampt. When the busy bit is still set at that time, | 
|  | * the access attempt is considered to have failed, | 
|  | * and we will print an error. | 
|  | */ | 
|  | static u32 rt2400pci_bbp_check(struct rt2x00_dev *rt2x00dev) | 
|  | { | 
|  | u32 reg; | 
|  | unsigned int i; | 
|  |  | 
|  | for (i = 0; i < REGISTER_BUSY_COUNT; i++) { | 
|  | rt2x00pci_register_read(rt2x00dev, BBPCSR, ®); | 
|  | if (!rt2x00_get_field32(reg, BBPCSR_BUSY)) | 
|  | break; | 
|  | udelay(REGISTER_BUSY_DELAY); | 
|  | } | 
|  |  | 
|  | return reg; | 
|  | } | 
|  |  | 
|  | static void rt2400pci_bbp_write(struct rt2x00_dev *rt2x00dev, | 
|  | const unsigned int word, const u8 value) | 
|  | { | 
|  | u32 reg; | 
|  |  | 
|  | /* | 
|  | * Wait until the BBP becomes ready. | 
|  | */ | 
|  | reg = rt2400pci_bbp_check(rt2x00dev); | 
|  | if (rt2x00_get_field32(reg, BBPCSR_BUSY)) { | 
|  | ERROR(rt2x00dev, "BBPCSR register busy. Write failed.\n"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Write the data into the BBP. | 
|  | */ | 
|  | reg = 0; | 
|  | rt2x00_set_field32(®, BBPCSR_VALUE, value); | 
|  | rt2x00_set_field32(®, BBPCSR_REGNUM, word); | 
|  | rt2x00_set_field32(®, BBPCSR_BUSY, 1); | 
|  | rt2x00_set_field32(®, BBPCSR_WRITE_CONTROL, 1); | 
|  |  | 
|  | rt2x00pci_register_write(rt2x00dev, BBPCSR, reg); | 
|  | } | 
|  |  | 
|  | static void rt2400pci_bbp_read(struct rt2x00_dev *rt2x00dev, | 
|  | const unsigned int word, u8 *value) | 
|  | { | 
|  | u32 reg; | 
|  |  | 
|  | /* | 
|  | * Wait until the BBP becomes ready. | 
|  | */ | 
|  | reg = rt2400pci_bbp_check(rt2x00dev); | 
|  | if (rt2x00_get_field32(reg, BBPCSR_BUSY)) { | 
|  | ERROR(rt2x00dev, "BBPCSR register busy. Read failed.\n"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Write the request into the BBP. | 
|  | */ | 
|  | reg = 0; | 
|  | rt2x00_set_field32(®, BBPCSR_REGNUM, word); | 
|  | rt2x00_set_field32(®, BBPCSR_BUSY, 1); | 
|  | rt2x00_set_field32(®, BBPCSR_WRITE_CONTROL, 0); | 
|  |  | 
|  | rt2x00pci_register_write(rt2x00dev, BBPCSR, reg); | 
|  |  | 
|  | /* | 
|  | * Wait until the BBP becomes ready. | 
|  | */ | 
|  | reg = rt2400pci_bbp_check(rt2x00dev); | 
|  | if (rt2x00_get_field32(reg, BBPCSR_BUSY)) { | 
|  | ERROR(rt2x00dev, "BBPCSR register busy. Read failed.\n"); | 
|  | *value = 0xff; | 
|  | return; | 
|  | } | 
|  |  | 
|  | *value = rt2x00_get_field32(reg, BBPCSR_VALUE); | 
|  | } | 
|  |  | 
|  | static void rt2400pci_rf_write(struct rt2x00_dev *rt2x00dev, | 
|  | const unsigned int word, const u32 value) | 
|  | { | 
|  | u32 reg; | 
|  | unsigned int i; | 
|  |  | 
|  | if (!word) | 
|  | return; | 
|  |  | 
|  | for (i = 0; i < REGISTER_BUSY_COUNT; i++) { | 
|  | rt2x00pci_register_read(rt2x00dev, RFCSR, ®); | 
|  | if (!rt2x00_get_field32(reg, RFCSR_BUSY)) | 
|  | goto rf_write; | 
|  | udelay(REGISTER_BUSY_DELAY); | 
|  | } | 
|  |  | 
|  | ERROR(rt2x00dev, "RFCSR register busy. Write failed.\n"); | 
|  | return; | 
|  |  | 
|  | rf_write: | 
|  | reg = 0; | 
|  | rt2x00_set_field32(®, RFCSR_VALUE, value); | 
|  | rt2x00_set_field32(®, RFCSR_NUMBER_OF_BITS, 20); | 
|  | rt2x00_set_field32(®, RFCSR_IF_SELECT, 0); | 
|  | rt2x00_set_field32(®, RFCSR_BUSY, 1); | 
|  |  | 
|  | rt2x00pci_register_write(rt2x00dev, RFCSR, reg); | 
|  | rt2x00_rf_write(rt2x00dev, word, value); | 
|  | } | 
|  |  | 
|  | static void rt2400pci_eepromregister_read(struct eeprom_93cx6 *eeprom) | 
|  | { | 
|  | struct rt2x00_dev *rt2x00dev = eeprom->data; | 
|  | u32 reg; | 
|  |  | 
|  | rt2x00pci_register_read(rt2x00dev, CSR21, ®); | 
|  |  | 
|  | eeprom->reg_data_in = !!rt2x00_get_field32(reg, CSR21_EEPROM_DATA_IN); | 
|  | eeprom->reg_data_out = !!rt2x00_get_field32(reg, CSR21_EEPROM_DATA_OUT); | 
|  | eeprom->reg_data_clock = | 
|  | !!rt2x00_get_field32(reg, CSR21_EEPROM_DATA_CLOCK); | 
|  | eeprom->reg_chip_select = | 
|  | !!rt2x00_get_field32(reg, CSR21_EEPROM_CHIP_SELECT); | 
|  | } | 
|  |  | 
|  | static void rt2400pci_eepromregister_write(struct eeprom_93cx6 *eeprom) | 
|  | { | 
|  | struct rt2x00_dev *rt2x00dev = eeprom->data; | 
|  | u32 reg = 0; | 
|  |  | 
|  | rt2x00_set_field32(®, CSR21_EEPROM_DATA_IN, !!eeprom->reg_data_in); | 
|  | rt2x00_set_field32(®, CSR21_EEPROM_DATA_OUT, !!eeprom->reg_data_out); | 
|  | rt2x00_set_field32(®, CSR21_EEPROM_DATA_CLOCK, | 
|  | !!eeprom->reg_data_clock); | 
|  | rt2x00_set_field32(®, CSR21_EEPROM_CHIP_SELECT, | 
|  | !!eeprom->reg_chip_select); | 
|  |  | 
|  | rt2x00pci_register_write(rt2x00dev, CSR21, reg); | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_RT2X00_LIB_DEBUGFS | 
|  | #define CSR_OFFSET(__word)	( CSR_REG_BASE + ((__word) * sizeof(u32)) ) | 
|  |  | 
|  | static void rt2400pci_read_csr(struct rt2x00_dev *rt2x00dev, | 
|  | const unsigned int word, u32 *data) | 
|  | { | 
|  | rt2x00pci_register_read(rt2x00dev, CSR_OFFSET(word), data); | 
|  | } | 
|  |  | 
|  | static void rt2400pci_write_csr(struct rt2x00_dev *rt2x00dev, | 
|  | const unsigned int word, u32 data) | 
|  | { | 
|  | rt2x00pci_register_write(rt2x00dev, CSR_OFFSET(word), data); | 
|  | } | 
|  |  | 
|  | static const struct rt2x00debug rt2400pci_rt2x00debug = { | 
|  | .owner	= THIS_MODULE, | 
|  | .csr	= { | 
|  | .read		= rt2400pci_read_csr, | 
|  | .write		= rt2400pci_write_csr, | 
|  | .word_size	= sizeof(u32), | 
|  | .word_count	= CSR_REG_SIZE / sizeof(u32), | 
|  | }, | 
|  | .eeprom	= { | 
|  | .read		= rt2x00_eeprom_read, | 
|  | .write		= rt2x00_eeprom_write, | 
|  | .word_size	= sizeof(u16), | 
|  | .word_count	= EEPROM_SIZE / sizeof(u16), | 
|  | }, | 
|  | .bbp	= { | 
|  | .read		= rt2400pci_bbp_read, | 
|  | .write		= rt2400pci_bbp_write, | 
|  | .word_size	= sizeof(u8), | 
|  | .word_count	= BBP_SIZE / sizeof(u8), | 
|  | }, | 
|  | .rf	= { | 
|  | .read		= rt2x00_rf_read, | 
|  | .write		= rt2400pci_rf_write, | 
|  | .word_size	= sizeof(u32), | 
|  | .word_count	= RF_SIZE / sizeof(u32), | 
|  | }, | 
|  | }; | 
|  | #endif /* CONFIG_RT2X00_LIB_DEBUGFS */ | 
|  |  | 
|  | #ifdef CONFIG_RT2400PCI_RFKILL | 
|  | static int rt2400pci_rfkill_poll(struct rt2x00_dev *rt2x00dev) | 
|  | { | 
|  | u32 reg; | 
|  |  | 
|  | rt2x00pci_register_read(rt2x00dev, GPIOCSR, ®); | 
|  | return rt2x00_get_field32(reg, GPIOCSR_BIT0); | 
|  | } | 
|  | #else | 
|  | #define rt2400pci_rfkill_poll	NULL | 
|  | #endif /* CONFIG_RT2400PCI_RFKILL */ | 
|  |  | 
|  | /* | 
|  | * Configuration handlers. | 
|  | */ | 
|  | static void rt2400pci_config_mac_addr(struct rt2x00_dev *rt2x00dev, | 
|  | __le32 *mac) | 
|  | { | 
|  | rt2x00pci_register_multiwrite(rt2x00dev, CSR3, mac, | 
|  | (2 * sizeof(__le32))); | 
|  | } | 
|  |  | 
|  | static void rt2400pci_config_bssid(struct rt2x00_dev *rt2x00dev, | 
|  | __le32 *bssid) | 
|  | { | 
|  | rt2x00pci_register_multiwrite(rt2x00dev, CSR5, bssid, | 
|  | (2 * sizeof(__le32))); | 
|  | } | 
|  |  | 
|  | static void rt2400pci_config_type(struct rt2x00_dev *rt2x00dev, const int type, | 
|  | const int tsf_sync) | 
|  | { | 
|  | u32 reg; | 
|  |  | 
|  | rt2x00pci_register_write(rt2x00dev, CSR14, 0); | 
|  |  | 
|  | /* | 
|  | * Enable beacon config | 
|  | */ | 
|  | rt2x00pci_register_read(rt2x00dev, BCNCSR1, ®); | 
|  | rt2x00_set_field32(®, BCNCSR1_PRELOAD, | 
|  | PREAMBLE + get_duration(IEEE80211_HEADER, 20)); | 
|  | rt2x00pci_register_write(rt2x00dev, BCNCSR1, reg); | 
|  |  | 
|  | /* | 
|  | * Enable synchronisation. | 
|  | */ | 
|  | rt2x00pci_register_read(rt2x00dev, CSR14, ®); | 
|  | rt2x00_set_field32(®, CSR14_TSF_COUNT, 1); | 
|  | rt2x00_set_field32(®, CSR14_TBCN, (tsf_sync == TSF_SYNC_BEACON)); | 
|  | rt2x00_set_field32(®, CSR14_BEACON_GEN, 0); | 
|  | rt2x00_set_field32(®, CSR14_TSF_SYNC, tsf_sync); | 
|  | rt2x00pci_register_write(rt2x00dev, CSR14, reg); | 
|  | } | 
|  |  | 
|  | static void rt2400pci_config_preamble(struct rt2x00_dev *rt2x00dev, | 
|  | const int short_preamble, | 
|  | const int ack_timeout, | 
|  | const int ack_consume_time) | 
|  | { | 
|  | int preamble_mask; | 
|  | u32 reg; | 
|  |  | 
|  | /* | 
|  | * When short preamble is enabled, we should set bit 0x08 | 
|  | */ | 
|  | preamble_mask = short_preamble << 3; | 
|  |  | 
|  | rt2x00pci_register_read(rt2x00dev, TXCSR1, ®); | 
|  | rt2x00_set_field32(®, TXCSR1_ACK_TIMEOUT, ack_timeout); | 
|  | rt2x00_set_field32(®, TXCSR1_ACK_CONSUME_TIME, ack_consume_time); | 
|  | rt2x00pci_register_write(rt2x00dev, TXCSR1, reg); | 
|  |  | 
|  | rt2x00pci_register_read(rt2x00dev, ARCSR2, ®); | 
|  | rt2x00_set_field32(®, ARCSR2_SIGNAL, 0x00 | preamble_mask); | 
|  | rt2x00_set_field32(®, ARCSR2_SERVICE, 0x04); | 
|  | rt2x00_set_field32(®, ARCSR2_LENGTH, get_duration(ACK_SIZE, 10)); | 
|  | rt2x00pci_register_write(rt2x00dev, ARCSR2, reg); | 
|  |  | 
|  | rt2x00pci_register_read(rt2x00dev, ARCSR3, ®); | 
|  | rt2x00_set_field32(®, ARCSR3_SIGNAL, 0x01 | preamble_mask); | 
|  | rt2x00_set_field32(®, ARCSR3_SERVICE, 0x04); | 
|  | rt2x00_set_field32(®, ARCSR2_LENGTH, get_duration(ACK_SIZE, 20)); | 
|  | rt2x00pci_register_write(rt2x00dev, ARCSR3, reg); | 
|  |  | 
|  | rt2x00pci_register_read(rt2x00dev, ARCSR4, ®); | 
|  | rt2x00_set_field32(®, ARCSR4_SIGNAL, 0x02 | preamble_mask); | 
|  | rt2x00_set_field32(®, ARCSR4_SERVICE, 0x04); | 
|  | rt2x00_set_field32(®, ARCSR2_LENGTH, get_duration(ACK_SIZE, 55)); | 
|  | rt2x00pci_register_write(rt2x00dev, ARCSR4, reg); | 
|  |  | 
|  | rt2x00pci_register_read(rt2x00dev, ARCSR5, ®); | 
|  | rt2x00_set_field32(®, ARCSR5_SIGNAL, 0x03 | preamble_mask); | 
|  | rt2x00_set_field32(®, ARCSR5_SERVICE, 0x84); | 
|  | rt2x00_set_field32(®, ARCSR2_LENGTH, get_duration(ACK_SIZE, 110)); | 
|  | rt2x00pci_register_write(rt2x00dev, ARCSR5, reg); | 
|  | } | 
|  |  | 
|  | static void rt2400pci_config_phymode(struct rt2x00_dev *rt2x00dev, | 
|  | const int basic_rate_mask) | 
|  | { | 
|  | rt2x00pci_register_write(rt2x00dev, ARCSR1, basic_rate_mask); | 
|  | } | 
|  |  | 
|  | static void rt2400pci_config_channel(struct rt2x00_dev *rt2x00dev, | 
|  | struct rf_channel *rf) | 
|  | { | 
|  | /* | 
|  | * Switch on tuning bits. | 
|  | */ | 
|  | rt2x00_set_field32(&rf->rf1, RF1_TUNER, 1); | 
|  | rt2x00_set_field32(&rf->rf3, RF3_TUNER, 1); | 
|  |  | 
|  | rt2400pci_rf_write(rt2x00dev, 1, rf->rf1); | 
|  | rt2400pci_rf_write(rt2x00dev, 2, rf->rf2); | 
|  | rt2400pci_rf_write(rt2x00dev, 3, rf->rf3); | 
|  |  | 
|  | /* | 
|  | * RF2420 chipset don't need any additional actions. | 
|  | */ | 
|  | if (rt2x00_rf(&rt2x00dev->chip, RF2420)) | 
|  | return; | 
|  |  | 
|  | /* | 
|  | * For the RT2421 chipsets we need to write an invalid | 
|  | * reference clock rate to activate auto_tune. | 
|  | * After that we set the value back to the correct channel. | 
|  | */ | 
|  | rt2400pci_rf_write(rt2x00dev, 1, rf->rf1); | 
|  | rt2400pci_rf_write(rt2x00dev, 2, 0x000c2a32); | 
|  | rt2400pci_rf_write(rt2x00dev, 3, rf->rf3); | 
|  |  | 
|  | msleep(1); | 
|  |  | 
|  | rt2400pci_rf_write(rt2x00dev, 1, rf->rf1); | 
|  | rt2400pci_rf_write(rt2x00dev, 2, rf->rf2); | 
|  | rt2400pci_rf_write(rt2x00dev, 3, rf->rf3); | 
|  |  | 
|  | msleep(1); | 
|  |  | 
|  | /* | 
|  | * Switch off tuning bits. | 
|  | */ | 
|  | rt2x00_set_field32(&rf->rf1, RF1_TUNER, 0); | 
|  | rt2x00_set_field32(&rf->rf3, RF3_TUNER, 0); | 
|  |  | 
|  | rt2400pci_rf_write(rt2x00dev, 1, rf->rf1); | 
|  | rt2400pci_rf_write(rt2x00dev, 3, rf->rf3); | 
|  |  | 
|  | /* | 
|  | * Clear false CRC during channel switch. | 
|  | */ | 
|  | rt2x00pci_register_read(rt2x00dev, CNT0, &rf->rf1); | 
|  | } | 
|  |  | 
|  | static void rt2400pci_config_txpower(struct rt2x00_dev *rt2x00dev, int txpower) | 
|  | { | 
|  | rt2400pci_bbp_write(rt2x00dev, 3, TXPOWER_TO_DEV(txpower)); | 
|  | } | 
|  |  | 
|  | static void rt2400pci_config_antenna(struct rt2x00_dev *rt2x00dev, | 
|  | struct antenna_setup *ant) | 
|  | { | 
|  | u8 r1; | 
|  | u8 r4; | 
|  |  | 
|  | rt2400pci_bbp_read(rt2x00dev, 4, &r4); | 
|  | rt2400pci_bbp_read(rt2x00dev, 1, &r1); | 
|  |  | 
|  | /* | 
|  | * Configure the TX antenna. | 
|  | */ | 
|  | switch (ant->tx) { | 
|  | case ANTENNA_HW_DIVERSITY: | 
|  | rt2x00_set_field8(&r1, BBP_R1_TX_ANTENNA, 1); | 
|  | break; | 
|  | case ANTENNA_A: | 
|  | rt2x00_set_field8(&r1, BBP_R1_TX_ANTENNA, 0); | 
|  | break; | 
|  | case ANTENNA_SW_DIVERSITY: | 
|  | /* | 
|  | * NOTE: We should never come here because rt2x00lib is | 
|  | * supposed to catch this and send us the correct antenna | 
|  | * explicitely. However we are nog going to bug about this. | 
|  | * Instead, just default to antenna B. | 
|  | */ | 
|  | case ANTENNA_B: | 
|  | rt2x00_set_field8(&r1, BBP_R1_TX_ANTENNA, 2); | 
|  | break; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Configure the RX antenna. | 
|  | */ | 
|  | switch (ant->rx) { | 
|  | case ANTENNA_HW_DIVERSITY: | 
|  | rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 1); | 
|  | break; | 
|  | case ANTENNA_A: | 
|  | rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 0); | 
|  | break; | 
|  | case ANTENNA_SW_DIVERSITY: | 
|  | /* | 
|  | * NOTE: We should never come here because rt2x00lib is | 
|  | * supposed to catch this and send us the correct antenna | 
|  | * explicitely. However we are nog going to bug about this. | 
|  | * Instead, just default to antenna B. | 
|  | */ | 
|  | case ANTENNA_B: | 
|  | rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 2); | 
|  | break; | 
|  | } | 
|  |  | 
|  | rt2400pci_bbp_write(rt2x00dev, 4, r4); | 
|  | rt2400pci_bbp_write(rt2x00dev, 1, r1); | 
|  | } | 
|  |  | 
|  | static void rt2400pci_config_duration(struct rt2x00_dev *rt2x00dev, | 
|  | struct rt2x00lib_conf *libconf) | 
|  | { | 
|  | u32 reg; | 
|  |  | 
|  | rt2x00pci_register_read(rt2x00dev, CSR11, ®); | 
|  | rt2x00_set_field32(®, CSR11_SLOT_TIME, libconf->slot_time); | 
|  | rt2x00pci_register_write(rt2x00dev, CSR11, reg); | 
|  |  | 
|  | rt2x00pci_register_read(rt2x00dev, CSR18, ®); | 
|  | rt2x00_set_field32(®, CSR18_SIFS, libconf->sifs); | 
|  | rt2x00_set_field32(®, CSR18_PIFS, libconf->pifs); | 
|  | rt2x00pci_register_write(rt2x00dev, CSR18, reg); | 
|  |  | 
|  | rt2x00pci_register_read(rt2x00dev, CSR19, ®); | 
|  | rt2x00_set_field32(®, CSR19_DIFS, libconf->difs); | 
|  | rt2x00_set_field32(®, CSR19_EIFS, libconf->eifs); | 
|  | rt2x00pci_register_write(rt2x00dev, CSR19, reg); | 
|  |  | 
|  | rt2x00pci_register_read(rt2x00dev, TXCSR1, ®); | 
|  | rt2x00_set_field32(®, TXCSR1_TSF_OFFSET, IEEE80211_HEADER); | 
|  | rt2x00_set_field32(®, TXCSR1_AUTORESPONDER, 1); | 
|  | rt2x00pci_register_write(rt2x00dev, TXCSR1, reg); | 
|  |  | 
|  | rt2x00pci_register_read(rt2x00dev, CSR12, ®); | 
|  | rt2x00_set_field32(®, CSR12_BEACON_INTERVAL, | 
|  | libconf->conf->beacon_int * 16); | 
|  | rt2x00_set_field32(®, CSR12_CFP_MAX_DURATION, | 
|  | libconf->conf->beacon_int * 16); | 
|  | rt2x00pci_register_write(rt2x00dev, CSR12, reg); | 
|  | } | 
|  |  | 
|  | static void rt2400pci_config(struct rt2x00_dev *rt2x00dev, | 
|  | const unsigned int flags, | 
|  | struct rt2x00lib_conf *libconf) | 
|  | { | 
|  | if (flags & CONFIG_UPDATE_PHYMODE) | 
|  | rt2400pci_config_phymode(rt2x00dev, libconf->basic_rates); | 
|  | if (flags & CONFIG_UPDATE_CHANNEL) | 
|  | rt2400pci_config_channel(rt2x00dev, &libconf->rf); | 
|  | if (flags & CONFIG_UPDATE_TXPOWER) | 
|  | rt2400pci_config_txpower(rt2x00dev, | 
|  | libconf->conf->power_level); | 
|  | if (flags & CONFIG_UPDATE_ANTENNA) | 
|  | rt2400pci_config_antenna(rt2x00dev, &libconf->ant); | 
|  | if (flags & (CONFIG_UPDATE_SLOT_TIME | CONFIG_UPDATE_BEACON_INT)) | 
|  | rt2400pci_config_duration(rt2x00dev, libconf); | 
|  | } | 
|  |  | 
|  | static void rt2400pci_config_cw(struct rt2x00_dev *rt2x00dev, | 
|  | struct ieee80211_tx_queue_params *params) | 
|  | { | 
|  | u32 reg; | 
|  |  | 
|  | rt2x00pci_register_read(rt2x00dev, CSR11, ®); | 
|  | rt2x00_set_field32(®, CSR11_CWMIN, params->cw_min); | 
|  | rt2x00_set_field32(®, CSR11_CWMAX, params->cw_max); | 
|  | rt2x00pci_register_write(rt2x00dev, CSR11, reg); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * LED functions. | 
|  | */ | 
|  | static void rt2400pci_enable_led(struct rt2x00_dev *rt2x00dev) | 
|  | { | 
|  | u32 reg; | 
|  |  | 
|  | rt2x00pci_register_read(rt2x00dev, LEDCSR, ®); | 
|  |  | 
|  | rt2x00_set_field32(®, LEDCSR_ON_PERIOD, 70); | 
|  | rt2x00_set_field32(®, LEDCSR_OFF_PERIOD, 30); | 
|  | rt2x00_set_field32(®, LEDCSR_LINK, | 
|  | (rt2x00dev->led_mode != LED_MODE_ASUS)); | 
|  | rt2x00_set_field32(®, LEDCSR_ACTIVITY, | 
|  | (rt2x00dev->led_mode != LED_MODE_TXRX_ACTIVITY)); | 
|  | rt2x00pci_register_write(rt2x00dev, LEDCSR, reg); | 
|  | } | 
|  |  | 
|  | static void rt2400pci_disable_led(struct rt2x00_dev *rt2x00dev) | 
|  | { | 
|  | u32 reg; | 
|  |  | 
|  | rt2x00pci_register_read(rt2x00dev, LEDCSR, ®); | 
|  | rt2x00_set_field32(®, LEDCSR_LINK, 0); | 
|  | rt2x00_set_field32(®, LEDCSR_ACTIVITY, 0); | 
|  | rt2x00pci_register_write(rt2x00dev, LEDCSR, reg); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Link tuning | 
|  | */ | 
|  | static void rt2400pci_link_stats(struct rt2x00_dev *rt2x00dev, | 
|  | struct link_qual *qual) | 
|  | { | 
|  | u32 reg; | 
|  | u8 bbp; | 
|  |  | 
|  | /* | 
|  | * Update FCS error count from register. | 
|  | */ | 
|  | rt2x00pci_register_read(rt2x00dev, CNT0, ®); | 
|  | qual->rx_failed = rt2x00_get_field32(reg, CNT0_FCS_ERROR); | 
|  |  | 
|  | /* | 
|  | * Update False CCA count from register. | 
|  | */ | 
|  | rt2400pci_bbp_read(rt2x00dev, 39, &bbp); | 
|  | qual->false_cca = bbp; | 
|  | } | 
|  |  | 
|  | static void rt2400pci_reset_tuner(struct rt2x00_dev *rt2x00dev) | 
|  | { | 
|  | rt2400pci_bbp_write(rt2x00dev, 13, 0x08); | 
|  | rt2x00dev->link.vgc_level = 0x08; | 
|  | } | 
|  |  | 
|  | static void rt2400pci_link_tuner(struct rt2x00_dev *rt2x00dev) | 
|  | { | 
|  | u8 reg; | 
|  |  | 
|  | /* | 
|  | * The link tuner should not run longer then 60 seconds, | 
|  | * and should run once every 2 seconds. | 
|  | */ | 
|  | if (rt2x00dev->link.count > 60 || !(rt2x00dev->link.count & 1)) | 
|  | return; | 
|  |  | 
|  | /* | 
|  | * Base r13 link tuning on the false cca count. | 
|  | */ | 
|  | rt2400pci_bbp_read(rt2x00dev, 13, ®); | 
|  |  | 
|  | if (rt2x00dev->link.qual.false_cca > 512 && reg < 0x20) { | 
|  | rt2400pci_bbp_write(rt2x00dev, 13, ++reg); | 
|  | rt2x00dev->link.vgc_level = reg; | 
|  | } else if (rt2x00dev->link.qual.false_cca < 100 && reg > 0x08) { | 
|  | rt2400pci_bbp_write(rt2x00dev, 13, --reg); | 
|  | rt2x00dev->link.vgc_level = reg; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Initialization functions. | 
|  | */ | 
|  | static void rt2400pci_init_rxentry(struct rt2x00_dev *rt2x00dev, | 
|  | struct data_entry *entry) | 
|  | { | 
|  | __le32 *rxd = entry->priv; | 
|  | u32 word; | 
|  |  | 
|  | rt2x00_desc_read(rxd, 2, &word); | 
|  | rt2x00_set_field32(&word, RXD_W2_BUFFER_LENGTH, entry->ring->data_size); | 
|  | rt2x00_desc_write(rxd, 2, word); | 
|  |  | 
|  | rt2x00_desc_read(rxd, 1, &word); | 
|  | rt2x00_set_field32(&word, RXD_W1_BUFFER_ADDRESS, entry->data_dma); | 
|  | rt2x00_desc_write(rxd, 1, word); | 
|  |  | 
|  | rt2x00_desc_read(rxd, 0, &word); | 
|  | rt2x00_set_field32(&word, RXD_W0_OWNER_NIC, 1); | 
|  | rt2x00_desc_write(rxd, 0, word); | 
|  | } | 
|  |  | 
|  | static void rt2400pci_init_txentry(struct rt2x00_dev *rt2x00dev, | 
|  | struct data_entry *entry) | 
|  | { | 
|  | __le32 *txd = entry->priv; | 
|  | u32 word; | 
|  |  | 
|  | rt2x00_desc_read(txd, 1, &word); | 
|  | rt2x00_set_field32(&word, TXD_W1_BUFFER_ADDRESS, entry->data_dma); | 
|  | rt2x00_desc_write(txd, 1, word); | 
|  |  | 
|  | rt2x00_desc_read(txd, 2, &word); | 
|  | rt2x00_set_field32(&word, TXD_W2_BUFFER_LENGTH, entry->ring->data_size); | 
|  | rt2x00_desc_write(txd, 2, word); | 
|  |  | 
|  | rt2x00_desc_read(txd, 0, &word); | 
|  | rt2x00_set_field32(&word, TXD_W0_VALID, 0); | 
|  | rt2x00_set_field32(&word, TXD_W0_OWNER_NIC, 0); | 
|  | rt2x00_desc_write(txd, 0, word); | 
|  | } | 
|  |  | 
|  | static int rt2400pci_init_rings(struct rt2x00_dev *rt2x00dev) | 
|  | { | 
|  | u32 reg; | 
|  |  | 
|  | /* | 
|  | * Initialize registers. | 
|  | */ | 
|  | rt2x00pci_register_read(rt2x00dev, TXCSR2, ®); | 
|  | rt2x00_set_field32(®, TXCSR2_TXD_SIZE, | 
|  | rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA0].desc_size); | 
|  | rt2x00_set_field32(®, TXCSR2_NUM_TXD, | 
|  | rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA1].stats.limit); | 
|  | rt2x00_set_field32(®, TXCSR2_NUM_ATIM, | 
|  | rt2x00dev->bcn[1].stats.limit); | 
|  | rt2x00_set_field32(®, TXCSR2_NUM_PRIO, | 
|  | rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA0].stats.limit); | 
|  | rt2x00pci_register_write(rt2x00dev, TXCSR2, reg); | 
|  |  | 
|  | rt2x00pci_register_read(rt2x00dev, TXCSR3, ®); | 
|  | rt2x00_set_field32(®, TXCSR3_TX_RING_REGISTER, | 
|  | rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA1].data_dma); | 
|  | rt2x00pci_register_write(rt2x00dev, TXCSR3, reg); | 
|  |  | 
|  | rt2x00pci_register_read(rt2x00dev, TXCSR5, ®); | 
|  | rt2x00_set_field32(®, TXCSR5_PRIO_RING_REGISTER, | 
|  | rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA0].data_dma); | 
|  | rt2x00pci_register_write(rt2x00dev, TXCSR5, reg); | 
|  |  | 
|  | rt2x00pci_register_read(rt2x00dev, TXCSR4, ®); | 
|  | rt2x00_set_field32(®, TXCSR4_ATIM_RING_REGISTER, | 
|  | rt2x00dev->bcn[1].data_dma); | 
|  | rt2x00pci_register_write(rt2x00dev, TXCSR4, reg); | 
|  |  | 
|  | rt2x00pci_register_read(rt2x00dev, TXCSR6, ®); | 
|  | rt2x00_set_field32(®, TXCSR6_BEACON_RING_REGISTER, | 
|  | rt2x00dev->bcn[0].data_dma); | 
|  | rt2x00pci_register_write(rt2x00dev, TXCSR6, reg); | 
|  |  | 
|  | rt2x00pci_register_read(rt2x00dev, RXCSR1, ®); | 
|  | rt2x00_set_field32(®, RXCSR1_RXD_SIZE, rt2x00dev->rx->desc_size); | 
|  | rt2x00_set_field32(®, RXCSR1_NUM_RXD, rt2x00dev->rx->stats.limit); | 
|  | rt2x00pci_register_write(rt2x00dev, RXCSR1, reg); | 
|  |  | 
|  | rt2x00pci_register_read(rt2x00dev, RXCSR2, ®); | 
|  | rt2x00_set_field32(®, RXCSR2_RX_RING_REGISTER, | 
|  | rt2x00dev->rx->data_dma); | 
|  | rt2x00pci_register_write(rt2x00dev, RXCSR2, reg); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int rt2400pci_init_registers(struct rt2x00_dev *rt2x00dev) | 
|  | { | 
|  | u32 reg; | 
|  |  | 
|  | rt2x00pci_register_write(rt2x00dev, PSCSR0, 0x00020002); | 
|  | rt2x00pci_register_write(rt2x00dev, PSCSR1, 0x00000002); | 
|  | rt2x00pci_register_write(rt2x00dev, PSCSR2, 0x00023f20); | 
|  | rt2x00pci_register_write(rt2x00dev, PSCSR3, 0x00000002); | 
|  |  | 
|  | rt2x00pci_register_read(rt2x00dev, TIMECSR, ®); | 
|  | rt2x00_set_field32(®, TIMECSR_US_COUNT, 33); | 
|  | rt2x00_set_field32(®, TIMECSR_US_64_COUNT, 63); | 
|  | rt2x00_set_field32(®, TIMECSR_BEACON_EXPECT, 0); | 
|  | rt2x00pci_register_write(rt2x00dev, TIMECSR, reg); | 
|  |  | 
|  | rt2x00pci_register_read(rt2x00dev, CSR9, ®); | 
|  | rt2x00_set_field32(®, CSR9_MAX_FRAME_UNIT, | 
|  | (rt2x00dev->rx->data_size / 128)); | 
|  | rt2x00pci_register_write(rt2x00dev, CSR9, reg); | 
|  |  | 
|  | rt2x00pci_register_write(rt2x00dev, CNT3, 0x3f080000); | 
|  |  | 
|  | rt2x00pci_register_read(rt2x00dev, ARCSR0, ®); | 
|  | rt2x00_set_field32(®, ARCSR0_AR_BBP_DATA0, 133); | 
|  | rt2x00_set_field32(®, ARCSR0_AR_BBP_ID0, 134); | 
|  | rt2x00_set_field32(®, ARCSR0_AR_BBP_DATA1, 136); | 
|  | rt2x00_set_field32(®, ARCSR0_AR_BBP_ID1, 135); | 
|  | rt2x00pci_register_write(rt2x00dev, ARCSR0, reg); | 
|  |  | 
|  | rt2x00pci_register_read(rt2x00dev, RXCSR3, ®); | 
|  | rt2x00_set_field32(®, RXCSR3_BBP_ID0, 3); /* Tx power.*/ | 
|  | rt2x00_set_field32(®, RXCSR3_BBP_ID0_VALID, 1); | 
|  | rt2x00_set_field32(®, RXCSR3_BBP_ID1, 32); /* Signal */ | 
|  | rt2x00_set_field32(®, RXCSR3_BBP_ID1_VALID, 1); | 
|  | rt2x00_set_field32(®, RXCSR3_BBP_ID2, 36); /* Rssi */ | 
|  | rt2x00_set_field32(®, RXCSR3_BBP_ID2_VALID, 1); | 
|  | rt2x00pci_register_write(rt2x00dev, RXCSR3, reg); | 
|  |  | 
|  | rt2x00pci_register_write(rt2x00dev, PWRCSR0, 0x3f3b3100); | 
|  |  | 
|  | if (rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_AWAKE)) | 
|  | return -EBUSY; | 
|  |  | 
|  | rt2x00pci_register_write(rt2x00dev, MACCSR0, 0x00217223); | 
|  | rt2x00pci_register_write(rt2x00dev, MACCSR1, 0x00235518); | 
|  |  | 
|  | rt2x00pci_register_read(rt2x00dev, MACCSR2, ®); | 
|  | rt2x00_set_field32(®, MACCSR2_DELAY, 64); | 
|  | rt2x00pci_register_write(rt2x00dev, MACCSR2, reg); | 
|  |  | 
|  | rt2x00pci_register_read(rt2x00dev, RALINKCSR, ®); | 
|  | rt2x00_set_field32(®, RALINKCSR_AR_BBP_DATA0, 17); | 
|  | rt2x00_set_field32(®, RALINKCSR_AR_BBP_ID0, 154); | 
|  | rt2x00_set_field32(®, RALINKCSR_AR_BBP_DATA1, 0); | 
|  | rt2x00_set_field32(®, RALINKCSR_AR_BBP_ID1, 154); | 
|  | rt2x00pci_register_write(rt2x00dev, RALINKCSR, reg); | 
|  |  | 
|  | rt2x00pci_register_read(rt2x00dev, CSR1, ®); | 
|  | rt2x00_set_field32(®, CSR1_SOFT_RESET, 1); | 
|  | rt2x00_set_field32(®, CSR1_BBP_RESET, 0); | 
|  | rt2x00_set_field32(®, CSR1_HOST_READY, 0); | 
|  | rt2x00pci_register_write(rt2x00dev, CSR1, reg); | 
|  |  | 
|  | rt2x00pci_register_read(rt2x00dev, CSR1, ®); | 
|  | rt2x00_set_field32(®, CSR1_SOFT_RESET, 0); | 
|  | rt2x00_set_field32(®, CSR1_HOST_READY, 1); | 
|  | rt2x00pci_register_write(rt2x00dev, CSR1, reg); | 
|  |  | 
|  | /* | 
|  | * We must clear the FCS and FIFO error count. | 
|  | * These registers are cleared on read, | 
|  | * so we may pass a useless variable to store the value. | 
|  | */ | 
|  | rt2x00pci_register_read(rt2x00dev, CNT0, ®); | 
|  | rt2x00pci_register_read(rt2x00dev, CNT4, ®); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int rt2400pci_init_bbp(struct rt2x00_dev *rt2x00dev) | 
|  | { | 
|  | unsigned int i; | 
|  | u16 eeprom; | 
|  | u8 reg_id; | 
|  | u8 value; | 
|  |  | 
|  | for (i = 0; i < REGISTER_BUSY_COUNT; i++) { | 
|  | rt2400pci_bbp_read(rt2x00dev, 0, &value); | 
|  | if ((value != 0xff) && (value != 0x00)) | 
|  | goto continue_csr_init; | 
|  | NOTICE(rt2x00dev, "Waiting for BBP register.\n"); | 
|  | udelay(REGISTER_BUSY_DELAY); | 
|  | } | 
|  |  | 
|  | ERROR(rt2x00dev, "BBP register access failed, aborting.\n"); | 
|  | return -EACCES; | 
|  |  | 
|  | continue_csr_init: | 
|  | rt2400pci_bbp_write(rt2x00dev, 1, 0x00); | 
|  | rt2400pci_bbp_write(rt2x00dev, 3, 0x27); | 
|  | rt2400pci_bbp_write(rt2x00dev, 4, 0x08); | 
|  | rt2400pci_bbp_write(rt2x00dev, 10, 0x0f); | 
|  | rt2400pci_bbp_write(rt2x00dev, 15, 0x72); | 
|  | rt2400pci_bbp_write(rt2x00dev, 16, 0x74); | 
|  | rt2400pci_bbp_write(rt2x00dev, 17, 0x20); | 
|  | rt2400pci_bbp_write(rt2x00dev, 18, 0x72); | 
|  | rt2400pci_bbp_write(rt2x00dev, 19, 0x0b); | 
|  | rt2400pci_bbp_write(rt2x00dev, 20, 0x00); | 
|  | rt2400pci_bbp_write(rt2x00dev, 28, 0x11); | 
|  | rt2400pci_bbp_write(rt2x00dev, 29, 0x04); | 
|  | rt2400pci_bbp_write(rt2x00dev, 30, 0x21); | 
|  | rt2400pci_bbp_write(rt2x00dev, 31, 0x00); | 
|  |  | 
|  | DEBUG(rt2x00dev, "Start initialization from EEPROM...\n"); | 
|  | for (i = 0; i < EEPROM_BBP_SIZE; i++) { | 
|  | rt2x00_eeprom_read(rt2x00dev, EEPROM_BBP_START + i, &eeprom); | 
|  |  | 
|  | if (eeprom != 0xffff && eeprom != 0x0000) { | 
|  | reg_id = rt2x00_get_field16(eeprom, EEPROM_BBP_REG_ID); | 
|  | value = rt2x00_get_field16(eeprom, EEPROM_BBP_VALUE); | 
|  | DEBUG(rt2x00dev, "BBP: 0x%02x, value: 0x%02x.\n", | 
|  | reg_id, value); | 
|  | rt2400pci_bbp_write(rt2x00dev, reg_id, value); | 
|  | } | 
|  | } | 
|  | DEBUG(rt2x00dev, "...End initialization from EEPROM.\n"); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Device state switch handlers. | 
|  | */ | 
|  | static void rt2400pci_toggle_rx(struct rt2x00_dev *rt2x00dev, | 
|  | enum dev_state state) | 
|  | { | 
|  | u32 reg; | 
|  |  | 
|  | rt2x00pci_register_read(rt2x00dev, RXCSR0, ®); | 
|  | rt2x00_set_field32(®, RXCSR0_DISABLE_RX, | 
|  | state == STATE_RADIO_RX_OFF); | 
|  | rt2x00pci_register_write(rt2x00dev, RXCSR0, reg); | 
|  | } | 
|  |  | 
|  | static void rt2400pci_toggle_irq(struct rt2x00_dev *rt2x00dev, | 
|  | enum dev_state state) | 
|  | { | 
|  | int mask = (state == STATE_RADIO_IRQ_OFF); | 
|  | u32 reg; | 
|  |  | 
|  | /* | 
|  | * When interrupts are being enabled, the interrupt registers | 
|  | * should clear the register to assure a clean state. | 
|  | */ | 
|  | if (state == STATE_RADIO_IRQ_ON) { | 
|  | rt2x00pci_register_read(rt2x00dev, CSR7, ®); | 
|  | rt2x00pci_register_write(rt2x00dev, CSR7, reg); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Only toggle the interrupts bits we are going to use. | 
|  | * Non-checked interrupt bits are disabled by default. | 
|  | */ | 
|  | rt2x00pci_register_read(rt2x00dev, CSR8, ®); | 
|  | rt2x00_set_field32(®, CSR8_TBCN_EXPIRE, mask); | 
|  | rt2x00_set_field32(®, CSR8_TXDONE_TXRING, mask); | 
|  | rt2x00_set_field32(®, CSR8_TXDONE_ATIMRING, mask); | 
|  | rt2x00_set_field32(®, CSR8_TXDONE_PRIORING, mask); | 
|  | rt2x00_set_field32(®, CSR8_RXDONE, mask); | 
|  | rt2x00pci_register_write(rt2x00dev, CSR8, reg); | 
|  | } | 
|  |  | 
|  | static int rt2400pci_enable_radio(struct rt2x00_dev *rt2x00dev) | 
|  | { | 
|  | /* | 
|  | * Initialize all registers. | 
|  | */ | 
|  | if (rt2400pci_init_rings(rt2x00dev) || | 
|  | rt2400pci_init_registers(rt2x00dev) || | 
|  | rt2400pci_init_bbp(rt2x00dev)) { | 
|  | ERROR(rt2x00dev, "Register initialization failed.\n"); | 
|  | return -EIO; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Enable interrupts. | 
|  | */ | 
|  | rt2400pci_toggle_irq(rt2x00dev, STATE_RADIO_IRQ_ON); | 
|  |  | 
|  | /* | 
|  | * Enable LED | 
|  | */ | 
|  | rt2400pci_enable_led(rt2x00dev); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void rt2400pci_disable_radio(struct rt2x00_dev *rt2x00dev) | 
|  | { | 
|  | u32 reg; | 
|  |  | 
|  | /* | 
|  | * Disable LED | 
|  | */ | 
|  | rt2400pci_disable_led(rt2x00dev); | 
|  |  | 
|  | rt2x00pci_register_write(rt2x00dev, PWRCSR0, 0); | 
|  |  | 
|  | /* | 
|  | * Disable synchronisation. | 
|  | */ | 
|  | rt2x00pci_register_write(rt2x00dev, CSR14, 0); | 
|  |  | 
|  | /* | 
|  | * Cancel RX and TX. | 
|  | */ | 
|  | rt2x00pci_register_read(rt2x00dev, TXCSR0, ®); | 
|  | rt2x00_set_field32(®, TXCSR0_ABORT, 1); | 
|  | rt2x00pci_register_write(rt2x00dev, TXCSR0, reg); | 
|  |  | 
|  | /* | 
|  | * Disable interrupts. | 
|  | */ | 
|  | rt2400pci_toggle_irq(rt2x00dev, STATE_RADIO_IRQ_OFF); | 
|  | } | 
|  |  | 
|  | static int rt2400pci_set_state(struct rt2x00_dev *rt2x00dev, | 
|  | enum dev_state state) | 
|  | { | 
|  | u32 reg; | 
|  | unsigned int i; | 
|  | char put_to_sleep; | 
|  | char bbp_state; | 
|  | char rf_state; | 
|  |  | 
|  | put_to_sleep = (state != STATE_AWAKE); | 
|  |  | 
|  | rt2x00pci_register_read(rt2x00dev, PWRCSR1, ®); | 
|  | rt2x00_set_field32(®, PWRCSR1_SET_STATE, 1); | 
|  | rt2x00_set_field32(®, PWRCSR1_BBP_DESIRE_STATE, state); | 
|  | rt2x00_set_field32(®, PWRCSR1_RF_DESIRE_STATE, state); | 
|  | rt2x00_set_field32(®, PWRCSR1_PUT_TO_SLEEP, put_to_sleep); | 
|  | rt2x00pci_register_write(rt2x00dev, PWRCSR1, reg); | 
|  |  | 
|  | /* | 
|  | * Device is not guaranteed to be in the requested state yet. | 
|  | * We must wait until the register indicates that the | 
|  | * device has entered the correct state. | 
|  | */ | 
|  | for (i = 0; i < REGISTER_BUSY_COUNT; i++) { | 
|  | rt2x00pci_register_read(rt2x00dev, PWRCSR1, ®); | 
|  | bbp_state = rt2x00_get_field32(reg, PWRCSR1_BBP_CURR_STATE); | 
|  | rf_state = rt2x00_get_field32(reg, PWRCSR1_RF_CURR_STATE); | 
|  | if (bbp_state == state && rf_state == state) | 
|  | return 0; | 
|  | msleep(10); | 
|  | } | 
|  |  | 
|  | NOTICE(rt2x00dev, "Device failed to enter state %d, " | 
|  | "current device state: bbp %d and rf %d.\n", | 
|  | state, bbp_state, rf_state); | 
|  |  | 
|  | return -EBUSY; | 
|  | } | 
|  |  | 
|  | static int rt2400pci_set_device_state(struct rt2x00_dev *rt2x00dev, | 
|  | enum dev_state state) | 
|  | { | 
|  | int retval = 0; | 
|  |  | 
|  | switch (state) { | 
|  | case STATE_RADIO_ON: | 
|  | retval = rt2400pci_enable_radio(rt2x00dev); | 
|  | break; | 
|  | case STATE_RADIO_OFF: | 
|  | rt2400pci_disable_radio(rt2x00dev); | 
|  | break; | 
|  | case STATE_RADIO_RX_ON: | 
|  | case STATE_RADIO_RX_ON_LINK: | 
|  | rt2400pci_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON); | 
|  | break; | 
|  | case STATE_RADIO_RX_OFF: | 
|  | case STATE_RADIO_RX_OFF_LINK: | 
|  | rt2400pci_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF); | 
|  | break; | 
|  | case STATE_DEEP_SLEEP: | 
|  | case STATE_SLEEP: | 
|  | case STATE_STANDBY: | 
|  | case STATE_AWAKE: | 
|  | retval = rt2400pci_set_state(rt2x00dev, state); | 
|  | break; | 
|  | default: | 
|  | retval = -ENOTSUPP; | 
|  | break; | 
|  | } | 
|  |  | 
|  | return retval; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * TX descriptor initialization | 
|  | */ | 
|  | static void rt2400pci_write_tx_desc(struct rt2x00_dev *rt2x00dev, | 
|  | struct sk_buff *skb, | 
|  | struct txdata_entry_desc *desc, | 
|  | struct ieee80211_tx_control *control) | 
|  | { | 
|  | struct skb_desc *skbdesc = get_skb_desc(skb); | 
|  | __le32 *txd = skbdesc->desc; | 
|  | u32 word; | 
|  |  | 
|  | /* | 
|  | * Start writing the descriptor words. | 
|  | */ | 
|  | rt2x00_desc_read(txd, 2, &word); | 
|  | rt2x00_set_field32(&word, TXD_W2_DATABYTE_COUNT, skbdesc->data_len); | 
|  | rt2x00_desc_write(txd, 2, word); | 
|  |  | 
|  | rt2x00_desc_read(txd, 3, &word); | 
|  | rt2x00_set_field32(&word, TXD_W3_PLCP_SIGNAL, desc->signal); | 
|  | rt2x00_set_field32(&word, TXD_W3_PLCP_SIGNAL_REGNUM, 5); | 
|  | rt2x00_set_field32(&word, TXD_W3_PLCP_SIGNAL_BUSY, 1); | 
|  | rt2x00_set_field32(&word, TXD_W3_PLCP_SERVICE, desc->service); | 
|  | rt2x00_set_field32(&word, TXD_W3_PLCP_SERVICE_REGNUM, 6); | 
|  | rt2x00_set_field32(&word, TXD_W3_PLCP_SERVICE_BUSY, 1); | 
|  | rt2x00_desc_write(txd, 3, word); | 
|  |  | 
|  | rt2x00_desc_read(txd, 4, &word); | 
|  | rt2x00_set_field32(&word, TXD_W4_PLCP_LENGTH_LOW, desc->length_low); | 
|  | rt2x00_set_field32(&word, TXD_W3_PLCP_LENGTH_LOW_REGNUM, 8); | 
|  | rt2x00_set_field32(&word, TXD_W3_PLCP_LENGTH_LOW_BUSY, 1); | 
|  | rt2x00_set_field32(&word, TXD_W4_PLCP_LENGTH_HIGH, desc->length_high); | 
|  | rt2x00_set_field32(&word, TXD_W3_PLCP_LENGTH_HIGH_REGNUM, 7); | 
|  | rt2x00_set_field32(&word, TXD_W3_PLCP_LENGTH_HIGH_BUSY, 1); | 
|  | rt2x00_desc_write(txd, 4, word); | 
|  |  | 
|  | rt2x00_desc_read(txd, 0, &word); | 
|  | rt2x00_set_field32(&word, TXD_W0_OWNER_NIC, 1); | 
|  | rt2x00_set_field32(&word, TXD_W0_VALID, 1); | 
|  | rt2x00_set_field32(&word, TXD_W0_MORE_FRAG, | 
|  | test_bit(ENTRY_TXD_MORE_FRAG, &desc->flags)); | 
|  | rt2x00_set_field32(&word, TXD_W0_ACK, | 
|  | test_bit(ENTRY_TXD_ACK, &desc->flags)); | 
|  | rt2x00_set_field32(&word, TXD_W0_TIMESTAMP, | 
|  | test_bit(ENTRY_TXD_REQ_TIMESTAMP, &desc->flags)); | 
|  | rt2x00_set_field32(&word, TXD_W0_RTS, | 
|  | test_bit(ENTRY_TXD_RTS_FRAME, &desc->flags)); | 
|  | rt2x00_set_field32(&word, TXD_W0_IFS, desc->ifs); | 
|  | rt2x00_set_field32(&word, TXD_W0_RETRY_MODE, | 
|  | !!(control->flags & | 
|  | IEEE80211_TXCTL_LONG_RETRY_LIMIT)); | 
|  | rt2x00_desc_write(txd, 0, word); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * TX data initialization | 
|  | */ | 
|  | static void rt2400pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev, | 
|  | unsigned int queue) | 
|  | { | 
|  | u32 reg; | 
|  |  | 
|  | if (queue == IEEE80211_TX_QUEUE_BEACON) { | 
|  | rt2x00pci_register_read(rt2x00dev, CSR14, ®); | 
|  | if (!rt2x00_get_field32(reg, CSR14_BEACON_GEN)) { | 
|  | rt2x00_set_field32(®, CSR14_BEACON_GEN, 1); | 
|  | rt2x00pci_register_write(rt2x00dev, CSR14, reg); | 
|  | } | 
|  | return; | 
|  | } | 
|  |  | 
|  | rt2x00pci_register_read(rt2x00dev, TXCSR0, ®); | 
|  | rt2x00_set_field32(®, TXCSR0_KICK_PRIO, | 
|  | (queue == IEEE80211_TX_QUEUE_DATA0)); | 
|  | rt2x00_set_field32(®, TXCSR0_KICK_TX, | 
|  | (queue == IEEE80211_TX_QUEUE_DATA1)); | 
|  | rt2x00_set_field32(®, TXCSR0_KICK_ATIM, | 
|  | (queue == IEEE80211_TX_QUEUE_AFTER_BEACON)); | 
|  | rt2x00pci_register_write(rt2x00dev, TXCSR0, reg); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * RX control handlers | 
|  | */ | 
|  | static void rt2400pci_fill_rxdone(struct data_entry *entry, | 
|  | struct rxdata_entry_desc *desc) | 
|  | { | 
|  | __le32 *rxd = entry->priv; | 
|  | u32 word0; | 
|  | u32 word2; | 
|  |  | 
|  | rt2x00_desc_read(rxd, 0, &word0); | 
|  | rt2x00_desc_read(rxd, 2, &word2); | 
|  |  | 
|  | desc->flags = 0; | 
|  | if (rt2x00_get_field32(word0, RXD_W0_CRC_ERROR)) | 
|  | desc->flags |= RX_FLAG_FAILED_FCS_CRC; | 
|  | if (rt2x00_get_field32(word0, RXD_W0_PHYSICAL_ERROR)) | 
|  | desc->flags |= RX_FLAG_FAILED_PLCP_CRC; | 
|  |  | 
|  | /* | 
|  | * Obtain the status about this packet. | 
|  | */ | 
|  | desc->signal = rt2x00_get_field32(word2, RXD_W2_SIGNAL); | 
|  | desc->rssi = rt2x00_get_field32(word2, RXD_W2_RSSI) - | 
|  | entry->ring->rt2x00dev->rssi_offset; | 
|  | desc->ofdm = 0; | 
|  | desc->size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT); | 
|  | desc->my_bss = !!rt2x00_get_field32(word0, RXD_W0_MY_BSS); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Interrupt functions. | 
|  | */ | 
|  | static void rt2400pci_txdone(struct rt2x00_dev *rt2x00dev, const int queue) | 
|  | { | 
|  | struct data_ring *ring = rt2x00lib_get_ring(rt2x00dev, queue); | 
|  | struct data_entry *entry; | 
|  | __le32 *txd; | 
|  | u32 word; | 
|  | int tx_status; | 
|  | int retry; | 
|  |  | 
|  | while (!rt2x00_ring_empty(ring)) { | 
|  | entry = rt2x00_get_data_entry_done(ring); | 
|  | txd = entry->priv; | 
|  | rt2x00_desc_read(txd, 0, &word); | 
|  |  | 
|  | if (rt2x00_get_field32(word, TXD_W0_OWNER_NIC) || | 
|  | !rt2x00_get_field32(word, TXD_W0_VALID)) | 
|  | break; | 
|  |  | 
|  | /* | 
|  | * Obtain the status about this packet. | 
|  | */ | 
|  | tx_status = rt2x00_get_field32(word, TXD_W0_RESULT); | 
|  | retry = rt2x00_get_field32(word, TXD_W0_RETRY_COUNT); | 
|  |  | 
|  | rt2x00pci_txdone(rt2x00dev, entry, tx_status, retry); | 
|  | } | 
|  | } | 
|  |  | 
|  | static irqreturn_t rt2400pci_interrupt(int irq, void *dev_instance) | 
|  | { | 
|  | struct rt2x00_dev *rt2x00dev = dev_instance; | 
|  | u32 reg; | 
|  |  | 
|  | /* | 
|  | * Get the interrupt sources & saved to local variable. | 
|  | * Write register value back to clear pending interrupts. | 
|  | */ | 
|  | rt2x00pci_register_read(rt2x00dev, CSR7, ®); | 
|  | rt2x00pci_register_write(rt2x00dev, CSR7, reg); | 
|  |  | 
|  | if (!reg) | 
|  | return IRQ_NONE; | 
|  |  | 
|  | if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags)) | 
|  | return IRQ_HANDLED; | 
|  |  | 
|  | /* | 
|  | * Handle interrupts, walk through all bits | 
|  | * and run the tasks, the bits are checked in order of | 
|  | * priority. | 
|  | */ | 
|  |  | 
|  | /* | 
|  | * 1 - Beacon timer expired interrupt. | 
|  | */ | 
|  | if (rt2x00_get_field32(reg, CSR7_TBCN_EXPIRE)) | 
|  | rt2x00lib_beacondone(rt2x00dev); | 
|  |  | 
|  | /* | 
|  | * 2 - Rx ring done interrupt. | 
|  | */ | 
|  | if (rt2x00_get_field32(reg, CSR7_RXDONE)) | 
|  | rt2x00pci_rxdone(rt2x00dev); | 
|  |  | 
|  | /* | 
|  | * 3 - Atim ring transmit done interrupt. | 
|  | */ | 
|  | if (rt2x00_get_field32(reg, CSR7_TXDONE_ATIMRING)) | 
|  | rt2400pci_txdone(rt2x00dev, IEEE80211_TX_QUEUE_AFTER_BEACON); | 
|  |  | 
|  | /* | 
|  | * 4 - Priority ring transmit done interrupt. | 
|  | */ | 
|  | if (rt2x00_get_field32(reg, CSR7_TXDONE_PRIORING)) | 
|  | rt2400pci_txdone(rt2x00dev, IEEE80211_TX_QUEUE_DATA0); | 
|  |  | 
|  | /* | 
|  | * 5 - Tx ring transmit done interrupt. | 
|  | */ | 
|  | if (rt2x00_get_field32(reg, CSR7_TXDONE_TXRING)) | 
|  | rt2400pci_txdone(rt2x00dev, IEEE80211_TX_QUEUE_DATA1); | 
|  |  | 
|  | return IRQ_HANDLED; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Device probe functions. | 
|  | */ | 
|  | static int rt2400pci_validate_eeprom(struct rt2x00_dev *rt2x00dev) | 
|  | { | 
|  | struct eeprom_93cx6 eeprom; | 
|  | u32 reg; | 
|  | u16 word; | 
|  | u8 *mac; | 
|  |  | 
|  | rt2x00pci_register_read(rt2x00dev, CSR21, ®); | 
|  |  | 
|  | eeprom.data = rt2x00dev; | 
|  | eeprom.register_read = rt2400pci_eepromregister_read; | 
|  | eeprom.register_write = rt2400pci_eepromregister_write; | 
|  | eeprom.width = rt2x00_get_field32(reg, CSR21_TYPE_93C46) ? | 
|  | PCI_EEPROM_WIDTH_93C46 : PCI_EEPROM_WIDTH_93C66; | 
|  | eeprom.reg_data_in = 0; | 
|  | eeprom.reg_data_out = 0; | 
|  | eeprom.reg_data_clock = 0; | 
|  | eeprom.reg_chip_select = 0; | 
|  |  | 
|  | eeprom_93cx6_multiread(&eeprom, EEPROM_BASE, rt2x00dev->eeprom, | 
|  | EEPROM_SIZE / sizeof(u16)); | 
|  |  | 
|  | /* | 
|  | * Start validation of the data that has been read. | 
|  | */ | 
|  | mac = rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0); | 
|  | if (!is_valid_ether_addr(mac)) { | 
|  | DECLARE_MAC_BUF(macbuf); | 
|  |  | 
|  | random_ether_addr(mac); | 
|  | EEPROM(rt2x00dev, "MAC: %s\n", print_mac(macbuf, mac)); | 
|  | } | 
|  |  | 
|  | rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &word); | 
|  | if (word == 0xffff) { | 
|  | ERROR(rt2x00dev, "Invalid EEPROM data detected.\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int rt2400pci_init_eeprom(struct rt2x00_dev *rt2x00dev) | 
|  | { | 
|  | u32 reg; | 
|  | u16 value; | 
|  | u16 eeprom; | 
|  |  | 
|  | /* | 
|  | * Read EEPROM word for configuration. | 
|  | */ | 
|  | rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom); | 
|  |  | 
|  | /* | 
|  | * Identify RF chipset. | 
|  | */ | 
|  | value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE); | 
|  | rt2x00pci_register_read(rt2x00dev, CSR0, ®); | 
|  | rt2x00_set_chip(rt2x00dev, RT2460, value, reg); | 
|  |  | 
|  | if (!rt2x00_rf(&rt2x00dev->chip, RF2420) && | 
|  | !rt2x00_rf(&rt2x00dev->chip, RF2421)) { | 
|  | ERROR(rt2x00dev, "Invalid RF chipset detected.\n"); | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Identify default antenna configuration. | 
|  | */ | 
|  | rt2x00dev->default_ant.tx = | 
|  | rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TX_DEFAULT); | 
|  | rt2x00dev->default_ant.rx = | 
|  | rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RX_DEFAULT); | 
|  |  | 
|  | /* | 
|  | * When the eeprom indicates SW_DIVERSITY use HW_DIVERSITY instead. | 
|  | * I am not 100% sure about this, but the legacy drivers do not | 
|  | * indicate antenna swapping in software is required when | 
|  | * diversity is enabled. | 
|  | */ | 
|  | if (rt2x00dev->default_ant.tx == ANTENNA_SW_DIVERSITY) | 
|  | rt2x00dev->default_ant.tx = ANTENNA_HW_DIVERSITY; | 
|  | if (rt2x00dev->default_ant.rx == ANTENNA_SW_DIVERSITY) | 
|  | rt2x00dev->default_ant.rx = ANTENNA_HW_DIVERSITY; | 
|  |  | 
|  | /* | 
|  | * Store led mode, for correct led behaviour. | 
|  | */ | 
|  | rt2x00dev->led_mode = | 
|  | rt2x00_get_field16(eeprom, EEPROM_ANTENNA_LED_MODE); | 
|  |  | 
|  | /* | 
|  | * Detect if this device has an hardware controlled radio. | 
|  | */ | 
|  | #ifdef CONFIG_RT2400PCI_RFKILL | 
|  | if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_HARDWARE_RADIO)) | 
|  | __set_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags); | 
|  | #endif /* CONFIG_RT2400PCI_RFKILL */ | 
|  |  | 
|  | /* | 
|  | * Check if the BBP tuning should be enabled. | 
|  | */ | 
|  | if (!rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RX_AGCVGC_TUNING)) | 
|  | __set_bit(CONFIG_DISABLE_LINK_TUNING, &rt2x00dev->flags); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * RF value list for RF2420 & RF2421 | 
|  | * Supports: 2.4 GHz | 
|  | */ | 
|  | static const struct rf_channel rf_vals_bg[] = { | 
|  | { 1,  0x00022058, 0x000c1fda, 0x00000101, 0 }, | 
|  | { 2,  0x00022058, 0x000c1fee, 0x00000101, 0 }, | 
|  | { 3,  0x00022058, 0x000c2002, 0x00000101, 0 }, | 
|  | { 4,  0x00022058, 0x000c2016, 0x00000101, 0 }, | 
|  | { 5,  0x00022058, 0x000c202a, 0x00000101, 0 }, | 
|  | { 6,  0x00022058, 0x000c203e, 0x00000101, 0 }, | 
|  | { 7,  0x00022058, 0x000c2052, 0x00000101, 0 }, | 
|  | { 8,  0x00022058, 0x000c2066, 0x00000101, 0 }, | 
|  | { 9,  0x00022058, 0x000c207a, 0x00000101, 0 }, | 
|  | { 10, 0x00022058, 0x000c208e, 0x00000101, 0 }, | 
|  | { 11, 0x00022058, 0x000c20a2, 0x00000101, 0 }, | 
|  | { 12, 0x00022058, 0x000c20b6, 0x00000101, 0 }, | 
|  | { 13, 0x00022058, 0x000c20ca, 0x00000101, 0 }, | 
|  | { 14, 0x00022058, 0x000c20fa, 0x00000101, 0 }, | 
|  | }; | 
|  |  | 
|  | static void rt2400pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev) | 
|  | { | 
|  | struct hw_mode_spec *spec = &rt2x00dev->spec; | 
|  | u8 *txpower; | 
|  | unsigned int i; | 
|  |  | 
|  | /* | 
|  | * Initialize all hw fields. | 
|  | */ | 
|  | rt2x00dev->hw->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING; | 
|  | rt2x00dev->hw->extra_tx_headroom = 0; | 
|  | rt2x00dev->hw->max_signal = MAX_SIGNAL; | 
|  | rt2x00dev->hw->max_rssi = MAX_RX_SSI; | 
|  | rt2x00dev->hw->queues = 2; | 
|  |  | 
|  | SET_IEEE80211_DEV(rt2x00dev->hw, &rt2x00dev_pci(rt2x00dev)->dev); | 
|  | SET_IEEE80211_PERM_ADDR(rt2x00dev->hw, | 
|  | rt2x00_eeprom_addr(rt2x00dev, | 
|  | EEPROM_MAC_ADDR_0)); | 
|  |  | 
|  | /* | 
|  | * Convert tx_power array in eeprom. | 
|  | */ | 
|  | txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_START); | 
|  | for (i = 0; i < 14; i++) | 
|  | txpower[i] = TXPOWER_FROM_DEV(txpower[i]); | 
|  |  | 
|  | /* | 
|  | * Initialize hw_mode information. | 
|  | */ | 
|  | spec->num_modes = 1; | 
|  | spec->num_rates = 4; | 
|  | spec->tx_power_a = NULL; | 
|  | spec->tx_power_bg = txpower; | 
|  | spec->tx_power_default = DEFAULT_TXPOWER; | 
|  |  | 
|  | spec->num_channels = ARRAY_SIZE(rf_vals_bg); | 
|  | spec->channels = rf_vals_bg; | 
|  | } | 
|  |  | 
|  | static int rt2400pci_probe_hw(struct rt2x00_dev *rt2x00dev) | 
|  | { | 
|  | int retval; | 
|  |  | 
|  | /* | 
|  | * Allocate eeprom data. | 
|  | */ | 
|  | retval = rt2400pci_validate_eeprom(rt2x00dev); | 
|  | if (retval) | 
|  | return retval; | 
|  |  | 
|  | retval = rt2400pci_init_eeprom(rt2x00dev); | 
|  | if (retval) | 
|  | return retval; | 
|  |  | 
|  | /* | 
|  | * Initialize hw specifications. | 
|  | */ | 
|  | rt2400pci_probe_hw_mode(rt2x00dev); | 
|  |  | 
|  | /* | 
|  | * This device requires the beacon ring | 
|  | */ | 
|  | __set_bit(DRIVER_REQUIRE_BEACON_RING, &rt2x00dev->flags); | 
|  |  | 
|  | /* | 
|  | * Set the rssi offset. | 
|  | */ | 
|  | rt2x00dev->rssi_offset = DEFAULT_RSSI_OFFSET; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * IEEE80211 stack callback functions. | 
|  | */ | 
|  | static void rt2400pci_configure_filter(struct ieee80211_hw *hw, | 
|  | unsigned int changed_flags, | 
|  | unsigned int *total_flags, | 
|  | int mc_count, | 
|  | struct dev_addr_list *mc_list) | 
|  | { | 
|  | struct rt2x00_dev *rt2x00dev = hw->priv; | 
|  | u32 reg; | 
|  |  | 
|  | /* | 
|  | * Mask off any flags we are going to ignore from | 
|  | * the total_flags field. | 
|  | */ | 
|  | *total_flags &= | 
|  | FIF_ALLMULTI | | 
|  | FIF_FCSFAIL | | 
|  | FIF_PLCPFAIL | | 
|  | FIF_CONTROL | | 
|  | FIF_OTHER_BSS | | 
|  | FIF_PROMISC_IN_BSS; | 
|  |  | 
|  | /* | 
|  | * Apply some rules to the filters: | 
|  | * - Some filters imply different filters to be set. | 
|  | * - Some things we can't filter out at all. | 
|  | */ | 
|  | *total_flags |= FIF_ALLMULTI; | 
|  | if (*total_flags & FIF_OTHER_BSS || | 
|  | *total_flags & FIF_PROMISC_IN_BSS) | 
|  | *total_flags |= FIF_PROMISC_IN_BSS | FIF_OTHER_BSS; | 
|  |  | 
|  | /* | 
|  | * Check if there is any work left for us. | 
|  | */ | 
|  | if (rt2x00dev->packet_filter == *total_flags) | 
|  | return; | 
|  | rt2x00dev->packet_filter = *total_flags; | 
|  |  | 
|  | /* | 
|  | * Start configuration steps. | 
|  | * Note that the version error will always be dropped | 
|  | * since there is no filter for it at this time. | 
|  | */ | 
|  | rt2x00pci_register_read(rt2x00dev, RXCSR0, ®); | 
|  | rt2x00_set_field32(®, RXCSR0_DROP_CRC, | 
|  | !(*total_flags & FIF_FCSFAIL)); | 
|  | rt2x00_set_field32(®, RXCSR0_DROP_PHYSICAL, | 
|  | !(*total_flags & FIF_PLCPFAIL)); | 
|  | rt2x00_set_field32(®, RXCSR0_DROP_CONTROL, | 
|  | !(*total_flags & FIF_CONTROL)); | 
|  | rt2x00_set_field32(®, RXCSR0_DROP_NOT_TO_ME, | 
|  | !(*total_flags & FIF_PROMISC_IN_BSS)); | 
|  | rt2x00_set_field32(®, RXCSR0_DROP_TODS, | 
|  | !(*total_flags & FIF_PROMISC_IN_BSS)); | 
|  | rt2x00_set_field32(®, RXCSR0_DROP_VERSION_ERROR, 1); | 
|  | rt2x00pci_register_write(rt2x00dev, RXCSR0, reg); | 
|  | } | 
|  |  | 
|  | static int rt2400pci_set_retry_limit(struct ieee80211_hw *hw, | 
|  | u32 short_retry, u32 long_retry) | 
|  | { | 
|  | struct rt2x00_dev *rt2x00dev = hw->priv; | 
|  | u32 reg; | 
|  |  | 
|  | rt2x00pci_register_read(rt2x00dev, CSR11, ®); | 
|  | rt2x00_set_field32(®, CSR11_LONG_RETRY, long_retry); | 
|  | rt2x00_set_field32(®, CSR11_SHORT_RETRY, short_retry); | 
|  | rt2x00pci_register_write(rt2x00dev, CSR11, reg); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int rt2400pci_conf_tx(struct ieee80211_hw *hw, | 
|  | int queue, | 
|  | const struct ieee80211_tx_queue_params *params) | 
|  | { | 
|  | struct rt2x00_dev *rt2x00dev = hw->priv; | 
|  |  | 
|  | /* | 
|  | * We don't support variating cw_min and cw_max variables | 
|  | * per queue. So by default we only configure the TX queue, | 
|  | * and ignore all other configurations. | 
|  | */ | 
|  | if (queue != IEEE80211_TX_QUEUE_DATA0) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (rt2x00mac_conf_tx(hw, queue, params)) | 
|  | return -EINVAL; | 
|  |  | 
|  | /* | 
|  | * Write configuration to register. | 
|  | */ | 
|  | rt2400pci_config_cw(rt2x00dev, &rt2x00dev->tx->tx_params); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static u64 rt2400pci_get_tsf(struct ieee80211_hw *hw) | 
|  | { | 
|  | struct rt2x00_dev *rt2x00dev = hw->priv; | 
|  | u64 tsf; | 
|  | u32 reg; | 
|  |  | 
|  | rt2x00pci_register_read(rt2x00dev, CSR17, ®); | 
|  | tsf = (u64) rt2x00_get_field32(reg, CSR17_HIGH_TSFTIMER) << 32; | 
|  | rt2x00pci_register_read(rt2x00dev, CSR16, ®); | 
|  | tsf |= rt2x00_get_field32(reg, CSR16_LOW_TSFTIMER); | 
|  |  | 
|  | return tsf; | 
|  | } | 
|  |  | 
|  | static void rt2400pci_reset_tsf(struct ieee80211_hw *hw) | 
|  | { | 
|  | struct rt2x00_dev *rt2x00dev = hw->priv; | 
|  |  | 
|  | rt2x00pci_register_write(rt2x00dev, CSR16, 0); | 
|  | rt2x00pci_register_write(rt2x00dev, CSR17, 0); | 
|  | } | 
|  |  | 
|  | static int rt2400pci_tx_last_beacon(struct ieee80211_hw *hw) | 
|  | { | 
|  | struct rt2x00_dev *rt2x00dev = hw->priv; | 
|  | u32 reg; | 
|  |  | 
|  | rt2x00pci_register_read(rt2x00dev, CSR15, ®); | 
|  | return rt2x00_get_field32(reg, CSR15_BEACON_SENT); | 
|  | } | 
|  |  | 
|  | static const struct ieee80211_ops rt2400pci_mac80211_ops = { | 
|  | .tx			= rt2x00mac_tx, | 
|  | .start			= rt2x00mac_start, | 
|  | .stop			= rt2x00mac_stop, | 
|  | .add_interface		= rt2x00mac_add_interface, | 
|  | .remove_interface	= rt2x00mac_remove_interface, | 
|  | .config			= rt2x00mac_config, | 
|  | .config_interface	= rt2x00mac_config_interface, | 
|  | .configure_filter	= rt2400pci_configure_filter, | 
|  | .get_stats		= rt2x00mac_get_stats, | 
|  | .set_retry_limit	= rt2400pci_set_retry_limit, | 
|  | .bss_info_changed	= rt2x00mac_bss_info_changed, | 
|  | .conf_tx		= rt2400pci_conf_tx, | 
|  | .get_tx_stats		= rt2x00mac_get_tx_stats, | 
|  | .get_tsf		= rt2400pci_get_tsf, | 
|  | .reset_tsf		= rt2400pci_reset_tsf, | 
|  | .beacon_update		= rt2x00pci_beacon_update, | 
|  | .tx_last_beacon		= rt2400pci_tx_last_beacon, | 
|  | }; | 
|  |  | 
|  | static const struct rt2x00lib_ops rt2400pci_rt2x00_ops = { | 
|  | .irq_handler		= rt2400pci_interrupt, | 
|  | .probe_hw		= rt2400pci_probe_hw, | 
|  | .initialize		= rt2x00pci_initialize, | 
|  | .uninitialize		= rt2x00pci_uninitialize, | 
|  | .init_rxentry		= rt2400pci_init_rxentry, | 
|  | .init_txentry		= rt2400pci_init_txentry, | 
|  | .set_device_state	= rt2400pci_set_device_state, | 
|  | .rfkill_poll		= rt2400pci_rfkill_poll, | 
|  | .link_stats		= rt2400pci_link_stats, | 
|  | .reset_tuner		= rt2400pci_reset_tuner, | 
|  | .link_tuner		= rt2400pci_link_tuner, | 
|  | .write_tx_desc		= rt2400pci_write_tx_desc, | 
|  | .write_tx_data		= rt2x00pci_write_tx_data, | 
|  | .kick_tx_queue		= rt2400pci_kick_tx_queue, | 
|  | .fill_rxdone		= rt2400pci_fill_rxdone, | 
|  | .config_mac_addr	= rt2400pci_config_mac_addr, | 
|  | .config_bssid		= rt2400pci_config_bssid, | 
|  | .config_type		= rt2400pci_config_type, | 
|  | .config_preamble	= rt2400pci_config_preamble, | 
|  | .config			= rt2400pci_config, | 
|  | }; | 
|  |  | 
|  | static const struct rt2x00_ops rt2400pci_ops = { | 
|  | .name		= KBUILD_MODNAME, | 
|  | .rxd_size	= RXD_DESC_SIZE, | 
|  | .txd_size	= TXD_DESC_SIZE, | 
|  | .eeprom_size	= EEPROM_SIZE, | 
|  | .rf_size	= RF_SIZE, | 
|  | .lib		= &rt2400pci_rt2x00_ops, | 
|  | .hw		= &rt2400pci_mac80211_ops, | 
|  | #ifdef CONFIG_RT2X00_LIB_DEBUGFS | 
|  | .debugfs	= &rt2400pci_rt2x00debug, | 
|  | #endif /* CONFIG_RT2X00_LIB_DEBUGFS */ | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * RT2400pci module information. | 
|  | */ | 
|  | static struct pci_device_id rt2400pci_device_table[] = { | 
|  | { PCI_DEVICE(0x1814, 0x0101), PCI_DEVICE_DATA(&rt2400pci_ops) }, | 
|  | { 0, } | 
|  | }; | 
|  |  | 
|  | MODULE_AUTHOR(DRV_PROJECT); | 
|  | MODULE_VERSION(DRV_VERSION); | 
|  | MODULE_DESCRIPTION("Ralink RT2400 PCI & PCMCIA Wireless LAN driver."); | 
|  | MODULE_SUPPORTED_DEVICE("Ralink RT2460 PCI & PCMCIA chipset based cards"); | 
|  | MODULE_DEVICE_TABLE(pci, rt2400pci_device_table); | 
|  | MODULE_LICENSE("GPL"); | 
|  |  | 
|  | static struct pci_driver rt2400pci_driver = { | 
|  | .name		= KBUILD_MODNAME, | 
|  | .id_table	= rt2400pci_device_table, | 
|  | .probe		= rt2x00pci_probe, | 
|  | .remove		= __devexit_p(rt2x00pci_remove), | 
|  | .suspend	= rt2x00pci_suspend, | 
|  | .resume		= rt2x00pci_resume, | 
|  | }; | 
|  |  | 
|  | static int __init rt2400pci_init(void) | 
|  | { | 
|  | return pci_register_driver(&rt2400pci_driver); | 
|  | } | 
|  |  | 
|  | static void __exit rt2400pci_exit(void) | 
|  | { | 
|  | pci_unregister_driver(&rt2400pci_driver); | 
|  | } | 
|  |  | 
|  | module_init(rt2400pci_init); | 
|  | module_exit(rt2400pci_exit); |