msm: board-copper: Convert gic to use of_irq_init API
The GIC driver has been recently changed to support Device Tree.
Make changes to use the Device Tree interrupt framework intialize
the GIC instead of invoking it manually.
Change-Id: I611bce3e8662583ba66553fd7ec37eac83b60388
Signed-off-by: Michael Bohan <mbohan@codeaurora.org>
diff --git a/arch/arm/boot/dts/msmcopper.dts b/arch/arm/boot/dts/msmcopper.dts
index b00237a..fea1c52 100644
--- a/arch/arm/boot/dts/msmcopper.dts
+++ b/arch/arm/boot/dts/msmcopper.dts
@@ -10,26 +10,26 @@
intc: interrupt-controller@F9000000 {
compatible = "qcom,msm-qgic2";
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <3>;
reg = <0xF9000000 0x1000>,
<0xF9002000 0x1000>;
};
timer {
compatible = "qcom,msm-qtimer";
- interrupts = <18>;
+ interrupts = <1 2 0>;
};
serial@F991F000 {
compatible = "qcom,msm-lsuart-v14";
reg = <0xF991F000 0x1000>;
- interrupts = <109>;
+ interrupts = <0 109 0>;
};
usb@F9A55000 {
compatible = "qcom,hsusb-otg";
reg = <0xF9A55000 0x400>;
- interrupts = <134>;
+ interrupts = <0 134 0>;
qcom,hsusb-otg-phy-type = <2>;
qcom,hsusb-otg-mode = <1>;
@@ -40,7 +40,7 @@
cell-index = <1>;
compatible = "qcom,msm-sdcc";
reg = <0xF980B000 0x1000>;
- interrupts = <123>;
+ interrupts = <0 123 0>;
qcom,sdcc-clk-rates = <400000 24000000 48000000>;
qcom,sdcc-sup-voltages = <3300 3300>;
@@ -53,7 +53,7 @@
cell-index = <3>;
compatible = "qcom,msm-sdcc";
reg = <0xF984B000 0x1000>;
- interrupts = <127>;
+ interrupts = <0 127 0>;
qcom,sdcc-clk-rates = <400000 24000000 48000000>;
qcom,sdcc-sup-voltages = <3300 3300>;
@@ -65,7 +65,7 @@
compatible = "qcom,msm_sps";
reg = <0xF9984000 0x15000>,
<0xF9999000 0xB000>;
- interrupts = <94>;
+ interrupts = <0 94 0>;
qcom,bam-dma-res-pipes = <6>;
};