spi/s3c64xx: modified error interrupt handling and init
commit 375981f2e14868be16cafbffd34a4f16a6ee01c6 upstream.
The status of the interrupt is available in the status register,
so reading the clear pending register and writing back the same
value will not actually clear the pending interrupts. This patch
modifies the interrupt handler to read the status register and
clear the corresponding pending bit in the clear pending register.
Modified the hwInit function to clear all the pending interrupts.
Signed-off-by: Girish K S <ks.giri@samsung.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c
index 972a94c..486e864 100644
--- a/drivers/spi/spi-s3c64xx.c
+++ b/drivers/spi/spi-s3c64xx.c
@@ -889,25 +889,30 @@
{
struct s3c64xx_spi_driver_data *sdd = data;
struct spi_master *spi = sdd->master;
- unsigned int val;
+ unsigned int val, clr = 0;
- val = readl(sdd->regs + S3C64XX_SPI_PENDING_CLR);
+ val = readl(sdd->regs + S3C64XX_SPI_STATUS);
- val &= S3C64XX_SPI_PND_RX_OVERRUN_CLR |
- S3C64XX_SPI_PND_RX_UNDERRUN_CLR |
- S3C64XX_SPI_PND_TX_OVERRUN_CLR |
- S3C64XX_SPI_PND_TX_UNDERRUN_CLR;
-
- writel(val, sdd->regs + S3C64XX_SPI_PENDING_CLR);
-
- if (val & S3C64XX_SPI_PND_RX_OVERRUN_CLR)
+ if (val & S3C64XX_SPI_ST_RX_OVERRUN_ERR) {
+ clr = S3C64XX_SPI_PND_RX_OVERRUN_CLR;
dev_err(&spi->dev, "RX overrun\n");
- if (val & S3C64XX_SPI_PND_RX_UNDERRUN_CLR)
+ }
+ if (val & S3C64XX_SPI_ST_RX_UNDERRUN_ERR) {
+ clr |= S3C64XX_SPI_PND_RX_UNDERRUN_CLR;
dev_err(&spi->dev, "RX underrun\n");
- if (val & S3C64XX_SPI_PND_TX_OVERRUN_CLR)
+ }
+ if (val & S3C64XX_SPI_ST_TX_OVERRUN_ERR) {
+ clr |= S3C64XX_SPI_PND_TX_OVERRUN_CLR;
dev_err(&spi->dev, "TX overrun\n");
- if (val & S3C64XX_SPI_PND_TX_UNDERRUN_CLR)
+ }
+ if (val & S3C64XX_SPI_ST_TX_UNDERRUN_ERR) {
+ clr |= S3C64XX_SPI_PND_TX_UNDERRUN_CLR;
dev_err(&spi->dev, "TX underrun\n");
+ }
+
+ /* Clear the pending irq by setting and then clearing it */
+ writel(clr, sdd->regs + S3C64XX_SPI_PENDING_CLR);
+ writel(0, sdd->regs + S3C64XX_SPI_PENDING_CLR);
return IRQ_HANDLED;
}
@@ -931,9 +936,13 @@
writel(0, regs + S3C64XX_SPI_MODE_CFG);
writel(0, regs + S3C64XX_SPI_PACKET_CNT);
- /* Clear any irq pending bits */
- writel(readl(regs + S3C64XX_SPI_PENDING_CLR),
- regs + S3C64XX_SPI_PENDING_CLR);
+ /* Clear any irq pending bits, should set and clear the bits */
+ val = S3C64XX_SPI_PND_RX_OVERRUN_CLR |
+ S3C64XX_SPI_PND_RX_UNDERRUN_CLR |
+ S3C64XX_SPI_PND_TX_OVERRUN_CLR |
+ S3C64XX_SPI_PND_TX_UNDERRUN_CLR;
+ writel(val, regs + S3C64XX_SPI_PENDING_CLR);
+ writel(0, regs + S3C64XX_SPI_PENDING_CLR);
writel(0, regs + S3C64XX_SPI_SWAP_CFG);