| /* | 
 |  * This file is subject to the terms and conditions of the GNU General Public | 
 |  * License.  See the file "COPYING" in the main directory of this archive | 
 |  * for more details. | 
 |  * | 
 |  * Copyright (c) 2004-2008 Silicon Graphics, Inc.  All Rights Reserved. | 
 |  */ | 
 |  | 
 | /* | 
 |  * Cross Partition Communication (XPC) support - standard version. | 
 |  * | 
 |  *	XPC provides a message passing capability that crosses partition | 
 |  *	boundaries. This module is made up of two parts: | 
 |  * | 
 |  *	    partition	This part detects the presence/absence of other | 
 |  *			partitions. It provides a heartbeat and monitors | 
 |  *			the heartbeats of other partitions. | 
 |  * | 
 |  *	    channel	This part manages the channels and sends/receives | 
 |  *			messages across them to/from other partitions. | 
 |  * | 
 |  *	There are a couple of additional functions residing in XP, which | 
 |  *	provide an interface to XPC for its users. | 
 |  * | 
 |  * | 
 |  *	Caveats: | 
 |  * | 
 |  *	  . We currently have no way to determine which nasid an IPI came | 
 |  *	    from. Thus, xpc_IPI_send() does a remote AMO write followed by | 
 |  *	    an IPI. The AMO indicates where data is to be pulled from, so | 
 |  *	    after the IPI arrives, the remote partition checks the AMO word. | 
 |  *	    The IPI can actually arrive before the AMO however, so other code | 
 |  *	    must periodically check for this case. Also, remote AMO operations | 
 |  *	    do not reliably time out. Thus we do a remote PIO read solely to | 
 |  *	    know whether the remote partition is down and whether we should | 
 |  *	    stop sending IPIs to it. This remote PIO read operation is set up | 
 |  *	    in a special nofault region so SAL knows to ignore (and cleanup) | 
 |  *	    any errors due to the remote AMO write, PIO read, and/or PIO | 
 |  *	    write operations. | 
 |  * | 
 |  *	    If/when new hardware solves this IPI problem, we should abandon | 
 |  *	    the current approach. | 
 |  * | 
 |  */ | 
 |  | 
 | #include <linux/kernel.h> | 
 | #include <linux/module.h> | 
 | #include <linux/init.h> | 
 | #include <linux/cache.h> | 
 | #include <linux/interrupt.h> | 
 | #include <linux/delay.h> | 
 | #include <linux/reboot.h> | 
 | #include <linux/completion.h> | 
 | #include <linux/kdebug.h> | 
 | #include <linux/kthread.h> | 
 | #include <linux/uaccess.h> | 
 | #include <asm/sn/intr.h> | 
 | #include <asm/sn/sn_sal.h> | 
 | #include "xpc.h" | 
 |  | 
 | /* define two XPC debug device structures to be used with dev_dbg() et al */ | 
 |  | 
 | struct device_driver xpc_dbg_name = { | 
 | 	.name = "xpc" | 
 | }; | 
 |  | 
 | struct device xpc_part_dbg_subname = { | 
 | 	.bus_id = {0},		/* set to "part" at xpc_init() time */ | 
 | 	.driver = &xpc_dbg_name | 
 | }; | 
 |  | 
 | struct device xpc_chan_dbg_subname = { | 
 | 	.bus_id = {0},		/* set to "chan" at xpc_init() time */ | 
 | 	.driver = &xpc_dbg_name | 
 | }; | 
 |  | 
 | struct device *xpc_part = &xpc_part_dbg_subname; | 
 | struct device *xpc_chan = &xpc_chan_dbg_subname; | 
 |  | 
 | static int xpc_kdebug_ignore; | 
 |  | 
 | /* systune related variables for /proc/sys directories */ | 
 |  | 
 | static int xpc_hb_interval = XPC_HB_DEFAULT_INTERVAL; | 
 | static int xpc_hb_min_interval = 1; | 
 | static int xpc_hb_max_interval = 10; | 
 |  | 
 | static int xpc_hb_check_interval = XPC_HB_CHECK_DEFAULT_INTERVAL; | 
 | static int xpc_hb_check_min_interval = 10; | 
 | static int xpc_hb_check_max_interval = 120; | 
 |  | 
 | int xpc_disengage_request_timelimit = XPC_DISENGAGE_REQUEST_DEFAULT_TIMELIMIT; | 
 | static int xpc_disengage_request_min_timelimit;	/* = 0 */ | 
 | static int xpc_disengage_request_max_timelimit = 120; | 
 |  | 
 | static ctl_table xpc_sys_xpc_hb_dir[] = { | 
 | 	{ | 
 | 	 .ctl_name = CTL_UNNUMBERED, | 
 | 	 .procname = "hb_interval", | 
 | 	 .data = &xpc_hb_interval, | 
 | 	 .maxlen = sizeof(int), | 
 | 	 .mode = 0644, | 
 | 	 .proc_handler = &proc_dointvec_minmax, | 
 | 	 .strategy = &sysctl_intvec, | 
 | 	 .extra1 = &xpc_hb_min_interval, | 
 | 	 .extra2 = &xpc_hb_max_interval}, | 
 | 	{ | 
 | 	 .ctl_name = CTL_UNNUMBERED, | 
 | 	 .procname = "hb_check_interval", | 
 | 	 .data = &xpc_hb_check_interval, | 
 | 	 .maxlen = sizeof(int), | 
 | 	 .mode = 0644, | 
 | 	 .proc_handler = &proc_dointvec_minmax, | 
 | 	 .strategy = &sysctl_intvec, | 
 | 	 .extra1 = &xpc_hb_check_min_interval, | 
 | 	 .extra2 = &xpc_hb_check_max_interval}, | 
 | 	{} | 
 | }; | 
 | static ctl_table xpc_sys_xpc_dir[] = { | 
 | 	{ | 
 | 	 .ctl_name = CTL_UNNUMBERED, | 
 | 	 .procname = "hb", | 
 | 	 .mode = 0555, | 
 | 	 .child = xpc_sys_xpc_hb_dir}, | 
 | 	{ | 
 | 	 .ctl_name = CTL_UNNUMBERED, | 
 | 	 .procname = "disengage_request_timelimit", | 
 | 	 .data = &xpc_disengage_request_timelimit, | 
 | 	 .maxlen = sizeof(int), | 
 | 	 .mode = 0644, | 
 | 	 .proc_handler = &proc_dointvec_minmax, | 
 | 	 .strategy = &sysctl_intvec, | 
 | 	 .extra1 = &xpc_disengage_request_min_timelimit, | 
 | 	 .extra2 = &xpc_disengage_request_max_timelimit}, | 
 | 	{} | 
 | }; | 
 | static ctl_table xpc_sys_dir[] = { | 
 | 	{ | 
 | 	 .ctl_name = CTL_UNNUMBERED, | 
 | 	 .procname = "xpc", | 
 | 	 .mode = 0555, | 
 | 	 .child = xpc_sys_xpc_dir}, | 
 | 	{} | 
 | }; | 
 | static struct ctl_table_header *xpc_sysctl; | 
 |  | 
 | /* non-zero if any remote partition disengage request was timed out */ | 
 | int xpc_disengage_request_timedout; | 
 |  | 
 | /* #of IRQs received */ | 
 | static atomic_t xpc_act_IRQ_rcvd; | 
 |  | 
 | /* IRQ handler notifies this wait queue on receipt of an IRQ */ | 
 | static DECLARE_WAIT_QUEUE_HEAD(xpc_act_IRQ_wq); | 
 |  | 
 | static unsigned long xpc_hb_check_timeout; | 
 |  | 
 | /* notification that the xpc_hb_checker thread has exited */ | 
 | static DECLARE_COMPLETION(xpc_hb_checker_exited); | 
 |  | 
 | /* notification that the xpc_discovery thread has exited */ | 
 | static DECLARE_COMPLETION(xpc_discovery_exited); | 
 |  | 
 | static struct timer_list xpc_hb_timer; | 
 |  | 
 | static void xpc_kthread_waitmsgs(struct xpc_partition *, struct xpc_channel *); | 
 |  | 
 | static int xpc_system_reboot(struct notifier_block *, unsigned long, void *); | 
 | static struct notifier_block xpc_reboot_notifier = { | 
 | 	.notifier_call = xpc_system_reboot, | 
 | }; | 
 |  | 
 | static int xpc_system_die(struct notifier_block *, unsigned long, void *); | 
 | static struct notifier_block xpc_die_notifier = { | 
 | 	.notifier_call = xpc_system_die, | 
 | }; | 
 |  | 
 | /* | 
 |  * Timer function to enforce the timelimit on the partition disengage request. | 
 |  */ | 
 | static void | 
 | xpc_timeout_partition_disengage_request(unsigned long data) | 
 | { | 
 | 	struct xpc_partition *part = (struct xpc_partition *)data; | 
 |  | 
 | 	DBUG_ON(time_before(jiffies, part->disengage_request_timeout)); | 
 |  | 
 | 	(void)xpc_partition_disengaged(part); | 
 |  | 
 | 	DBUG_ON(part->disengage_request_timeout != 0); | 
 | 	DBUG_ON(xpc_partition_engaged(1UL << XPC_PARTID(part)) != 0); | 
 | } | 
 |  | 
 | /* | 
 |  * Notify the heartbeat check thread that an IRQ has been received. | 
 |  */ | 
 | static irqreturn_t | 
 | xpc_act_IRQ_handler(int irq, void *dev_id) | 
 | { | 
 | 	atomic_inc(&xpc_act_IRQ_rcvd); | 
 | 	wake_up_interruptible(&xpc_act_IRQ_wq); | 
 | 	return IRQ_HANDLED; | 
 | } | 
 |  | 
 | /* | 
 |  * Timer to produce the heartbeat.  The timer structures function is | 
 |  * already set when this is initially called.  A tunable is used to | 
 |  * specify when the next timeout should occur. | 
 |  */ | 
 | static void | 
 | xpc_hb_beater(unsigned long dummy) | 
 | { | 
 | 	xpc_vars->heartbeat++; | 
 |  | 
 | 	if (time_after_eq(jiffies, xpc_hb_check_timeout)) | 
 | 		wake_up_interruptible(&xpc_act_IRQ_wq); | 
 |  | 
 | 	xpc_hb_timer.expires = jiffies + (xpc_hb_interval * HZ); | 
 | 	add_timer(&xpc_hb_timer); | 
 | } | 
 |  | 
 | /* | 
 |  * This thread is responsible for nearly all of the partition | 
 |  * activation/deactivation. | 
 |  */ | 
 | static int | 
 | xpc_hb_checker(void *ignore) | 
 | { | 
 | 	int last_IRQ_count = 0; | 
 | 	int new_IRQ_count; | 
 | 	int force_IRQ = 0; | 
 |  | 
 | 	/* this thread was marked active by xpc_hb_init() */ | 
 |  | 
 | 	set_cpus_allowed(current, cpumask_of_cpu(XPC_HB_CHECK_CPU)); | 
 |  | 
 | 	/* set our heartbeating to other partitions into motion */ | 
 | 	xpc_hb_check_timeout = jiffies + (xpc_hb_check_interval * HZ); | 
 | 	xpc_hb_beater(0); | 
 |  | 
 | 	while (!xpc_exiting) { | 
 |  | 
 | 		dev_dbg(xpc_part, "woke up with %d ticks rem; %d IRQs have " | 
 | 			"been received\n", | 
 | 			(int)(xpc_hb_check_timeout - jiffies), | 
 | 			atomic_read(&xpc_act_IRQ_rcvd) - last_IRQ_count); | 
 |  | 
 | 		/* checking of remote heartbeats is skewed by IRQ handling */ | 
 | 		if (time_after_eq(jiffies, xpc_hb_check_timeout)) { | 
 | 			dev_dbg(xpc_part, "checking remote heartbeats\n"); | 
 | 			xpc_check_remote_hb(); | 
 |  | 
 | 			/* | 
 | 			 * We need to periodically recheck to ensure no | 
 | 			 * IPI/AMO pairs have been missed.  That check | 
 | 			 * must always reset xpc_hb_check_timeout. | 
 | 			 */ | 
 | 			force_IRQ = 1; | 
 | 		} | 
 |  | 
 | 		/* check for outstanding IRQs */ | 
 | 		new_IRQ_count = atomic_read(&xpc_act_IRQ_rcvd); | 
 | 		if (last_IRQ_count < new_IRQ_count || force_IRQ != 0) { | 
 | 			force_IRQ = 0; | 
 |  | 
 | 			dev_dbg(xpc_part, "found an IRQ to process; will be " | 
 | 				"resetting xpc_hb_check_timeout\n"); | 
 |  | 
 | 			last_IRQ_count += xpc_identify_act_IRQ_sender(); | 
 | 			if (last_IRQ_count < new_IRQ_count) { | 
 | 				/* retry once to help avoid missing AMO */ | 
 | 				(void)xpc_identify_act_IRQ_sender(); | 
 | 			} | 
 | 			last_IRQ_count = new_IRQ_count; | 
 |  | 
 | 			xpc_hb_check_timeout = jiffies + | 
 | 			    (xpc_hb_check_interval * HZ); | 
 | 		} | 
 |  | 
 | 		/* wait for IRQ or timeout */ | 
 | 		(void)wait_event_interruptible(xpc_act_IRQ_wq, | 
 | 					       (last_IRQ_count < | 
 | 						atomic_read(&xpc_act_IRQ_rcvd) | 
 | 						|| time_after_eq(jiffies, | 
 | 							xpc_hb_check_timeout) || | 
 | 						xpc_exiting)); | 
 | 	} | 
 |  | 
 | 	dev_dbg(xpc_part, "heartbeat checker is exiting\n"); | 
 |  | 
 | 	/* mark this thread as having exited */ | 
 | 	complete(&xpc_hb_checker_exited); | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * This thread will attempt to discover other partitions to activate | 
 |  * based on info provided by SAL. This new thread is short lived and | 
 |  * will exit once discovery is complete. | 
 |  */ | 
 | static int | 
 | xpc_initiate_discovery(void *ignore) | 
 | { | 
 | 	xpc_discovery(); | 
 |  | 
 | 	dev_dbg(xpc_part, "discovery thread is exiting\n"); | 
 |  | 
 | 	/* mark this thread as having exited */ | 
 | 	complete(&xpc_discovery_exited); | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * Establish first contact with the remote partititon. This involves pulling | 
 |  * the XPC per partition variables from the remote partition and waiting for | 
 |  * the remote partition to pull ours. | 
 |  */ | 
 | static enum xp_retval | 
 | xpc_make_first_contact(struct xpc_partition *part) | 
 | { | 
 | 	enum xp_retval ret; | 
 |  | 
 | 	while ((ret = xpc_pull_remote_vars_part(part)) != xpSuccess) { | 
 | 		if (ret != xpRetry) { | 
 | 			XPC_DEACTIVATE_PARTITION(part, ret); | 
 | 			return ret; | 
 | 		} | 
 |  | 
 | 		dev_dbg(xpc_chan, "waiting to make first contact with " | 
 | 			"partition %d\n", XPC_PARTID(part)); | 
 |  | 
 | 		/* wait a 1/4 of a second or so */ | 
 | 		(void)msleep_interruptible(250); | 
 |  | 
 | 		if (part->act_state == XPC_P_DEACTIVATING) | 
 | 			return part->reason; | 
 | 	} | 
 |  | 
 | 	return xpc_mark_partition_active(part); | 
 | } | 
 |  | 
 | /* | 
 |  * The first kthread assigned to a newly activated partition is the one | 
 |  * created by XPC HB with which it calls xpc_partition_up(). XPC hangs on to | 
 |  * that kthread until the partition is brought down, at which time that kthread | 
 |  * returns back to XPC HB. (The return of that kthread will signify to XPC HB | 
 |  * that XPC has dismantled all communication infrastructure for the associated | 
 |  * partition.) This kthread becomes the channel manager for that partition. | 
 |  * | 
 |  * Each active partition has a channel manager, who, besides connecting and | 
 |  * disconnecting channels, will ensure that each of the partition's connected | 
 |  * channels has the required number of assigned kthreads to get the work done. | 
 |  */ | 
 | static void | 
 | xpc_channel_mgr(struct xpc_partition *part) | 
 | { | 
 | 	while (part->act_state != XPC_P_DEACTIVATING || | 
 | 	       atomic_read(&part->nchannels_active) > 0 || | 
 | 	       !xpc_partition_disengaged(part)) { | 
 |  | 
 | 		xpc_process_channel_activity(part); | 
 |  | 
 | 		/* | 
 | 		 * Wait until we've been requested to activate kthreads or | 
 | 		 * all of the channel's message queues have been torn down or | 
 | 		 * a signal is pending. | 
 | 		 * | 
 | 		 * The channel_mgr_requests is set to 1 after being awakened, | 
 | 		 * This is done to prevent the channel mgr from making one pass | 
 | 		 * through the loop for each request, since he will | 
 | 		 * be servicing all the requests in one pass. The reason it's | 
 | 		 * set to 1 instead of 0 is so that other kthreads will know | 
 | 		 * that the channel mgr is running and won't bother trying to | 
 | 		 * wake him up. | 
 | 		 */ | 
 | 		atomic_dec(&part->channel_mgr_requests); | 
 | 		(void)wait_event_interruptible(part->channel_mgr_wq, | 
 | 				(atomic_read(&part->channel_mgr_requests) > 0 || | 
 | 				 part->local_IPI_amo != 0 || | 
 | 				 (part->act_state == XPC_P_DEACTIVATING && | 
 | 				 atomic_read(&part->nchannels_active) == 0 && | 
 | 				 xpc_partition_disengaged(part)))); | 
 | 		atomic_set(&part->channel_mgr_requests, 1); | 
 | 	} | 
 | } | 
 |  | 
 | /* | 
 |  * When XPC HB determines that a partition has come up, it will create a new | 
 |  * kthread and that kthread will call this function to attempt to set up the | 
 |  * basic infrastructure used for Cross Partition Communication with the newly | 
 |  * upped partition. | 
 |  * | 
 |  * The kthread that was created by XPC HB and which setup the XPC | 
 |  * infrastructure will remain assigned to the partition until the partition | 
 |  * goes down. At which time the kthread will teardown the XPC infrastructure | 
 |  * and then exit. | 
 |  * | 
 |  * XPC HB will put the remote partition's XPC per partition specific variables | 
 |  * physical address into xpc_partitions[partid].remote_vars_part_pa prior to | 
 |  * calling xpc_partition_up(). | 
 |  */ | 
 | static void | 
 | xpc_partition_up(struct xpc_partition *part) | 
 | { | 
 | 	DBUG_ON(part->channels != NULL); | 
 |  | 
 | 	dev_dbg(xpc_chan, "activating partition %d\n", XPC_PARTID(part)); | 
 |  | 
 | 	if (xpc_setup_infrastructure(part) != xpSuccess) | 
 | 		return; | 
 |  | 
 | 	/* | 
 | 	 * The kthread that XPC HB called us with will become the | 
 | 	 * channel manager for this partition. It will not return | 
 | 	 * back to XPC HB until the partition's XPC infrastructure | 
 | 	 * has been dismantled. | 
 | 	 */ | 
 |  | 
 | 	(void)xpc_part_ref(part);	/* this will always succeed */ | 
 |  | 
 | 	if (xpc_make_first_contact(part) == xpSuccess) | 
 | 		xpc_channel_mgr(part); | 
 |  | 
 | 	xpc_part_deref(part); | 
 |  | 
 | 	xpc_teardown_infrastructure(part); | 
 | } | 
 |  | 
 | static int | 
 | xpc_activating(void *__partid) | 
 | { | 
 | 	short partid = (u64)__partid; | 
 | 	struct xpc_partition *part = &xpc_partitions[partid]; | 
 | 	unsigned long irq_flags; | 
 |  | 
 | 	DBUG_ON(partid <= 0 || partid >= XP_MAX_PARTITIONS); | 
 |  | 
 | 	spin_lock_irqsave(&part->act_lock, irq_flags); | 
 |  | 
 | 	if (part->act_state == XPC_P_DEACTIVATING) { | 
 | 		part->act_state = XPC_P_INACTIVE; | 
 | 		spin_unlock_irqrestore(&part->act_lock, irq_flags); | 
 | 		part->remote_rp_pa = 0; | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	/* indicate the thread is activating */ | 
 | 	DBUG_ON(part->act_state != XPC_P_ACTIVATION_REQ); | 
 | 	part->act_state = XPC_P_ACTIVATING; | 
 |  | 
 | 	XPC_SET_REASON(part, 0, 0); | 
 | 	spin_unlock_irqrestore(&part->act_lock, irq_flags); | 
 |  | 
 | 	dev_dbg(xpc_part, "bringing partition %d up\n", partid); | 
 |  | 
 | 	/* | 
 | 	 * Register the remote partition's AMOs with SAL so it can handle | 
 | 	 * and cleanup errors within that address range should the remote | 
 | 	 * partition go down. We don't unregister this range because it is | 
 | 	 * difficult to tell when outstanding writes to the remote partition | 
 | 	 * are finished and thus when it is safe to unregister. This should | 
 | 	 * not result in wasted space in the SAL xp_addr_region table because | 
 | 	 * we should get the same page for remote_amos_page_pa after module | 
 | 	 * reloads and system reboots. | 
 | 	 */ | 
 | 	if (sn_register_xp_addr_region(part->remote_amos_page_pa, | 
 | 				       PAGE_SIZE, 1) < 0) { | 
 | 		dev_warn(xpc_part, "xpc_partition_up(%d) failed to register " | 
 | 			 "xp_addr region\n", partid); | 
 |  | 
 | 		spin_lock_irqsave(&part->act_lock, irq_flags); | 
 | 		part->act_state = XPC_P_INACTIVE; | 
 | 		XPC_SET_REASON(part, xpPhysAddrRegFailed, __LINE__); | 
 | 		spin_unlock_irqrestore(&part->act_lock, irq_flags); | 
 | 		part->remote_rp_pa = 0; | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	xpc_allow_hb(partid, xpc_vars); | 
 | 	xpc_IPI_send_activated(part); | 
 |  | 
 | 	/* | 
 | 	 * xpc_partition_up() holds this thread and marks this partition as | 
 | 	 * XPC_P_ACTIVE by calling xpc_hb_mark_active(). | 
 | 	 */ | 
 | 	(void)xpc_partition_up(part); | 
 |  | 
 | 	xpc_disallow_hb(partid, xpc_vars); | 
 | 	xpc_mark_partition_inactive(part); | 
 |  | 
 | 	if (part->reason == xpReactivating) { | 
 | 		/* interrupting ourselves results in activating partition */ | 
 | 		xpc_IPI_send_reactivate(part); | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | void | 
 | xpc_activate_partition(struct xpc_partition *part) | 
 | { | 
 | 	short partid = XPC_PARTID(part); | 
 | 	unsigned long irq_flags; | 
 | 	struct task_struct *kthread; | 
 |  | 
 | 	spin_lock_irqsave(&part->act_lock, irq_flags); | 
 |  | 
 | 	DBUG_ON(part->act_state != XPC_P_INACTIVE); | 
 |  | 
 | 	part->act_state = XPC_P_ACTIVATION_REQ; | 
 | 	XPC_SET_REASON(part, xpCloneKThread, __LINE__); | 
 |  | 
 | 	spin_unlock_irqrestore(&part->act_lock, irq_flags); | 
 |  | 
 | 	kthread = kthread_run(xpc_activating, (void *)((u64)partid), "xpc%02d", | 
 | 			      partid); | 
 | 	if (IS_ERR(kthread)) { | 
 | 		spin_lock_irqsave(&part->act_lock, irq_flags); | 
 | 		part->act_state = XPC_P_INACTIVE; | 
 | 		XPC_SET_REASON(part, xpCloneKThreadFailed, __LINE__); | 
 | 		spin_unlock_irqrestore(&part->act_lock, irq_flags); | 
 | 	} | 
 | } | 
 |  | 
 | /* | 
 |  * Handle the receipt of a SGI_XPC_NOTIFY IRQ by seeing whether the specified | 
 |  * partition actually sent it. Since SGI_XPC_NOTIFY IRQs may be shared by more | 
 |  * than one partition, we use an AMO_t structure per partition to indicate | 
 |  * whether a partition has sent an IPI or not.  If it has, then wake up the | 
 |  * associated kthread to handle it. | 
 |  * | 
 |  * All SGI_XPC_NOTIFY IRQs received by XPC are the result of IPIs sent by XPC | 
 |  * running on other partitions. | 
 |  * | 
 |  * Noteworthy Arguments: | 
 |  * | 
 |  *	irq - Interrupt ReQuest number. NOT USED. | 
 |  * | 
 |  *	dev_id - partid of IPI's potential sender. | 
 |  */ | 
 | irqreturn_t | 
 | xpc_notify_IRQ_handler(int irq, void *dev_id) | 
 | { | 
 | 	short partid = (short)(u64)dev_id; | 
 | 	struct xpc_partition *part = &xpc_partitions[partid]; | 
 |  | 
 | 	DBUG_ON(partid <= 0 || partid >= XP_MAX_PARTITIONS); | 
 |  | 
 | 	if (xpc_part_ref(part)) { | 
 | 		xpc_check_for_channel_activity(part); | 
 |  | 
 | 		xpc_part_deref(part); | 
 | 	} | 
 | 	return IRQ_HANDLED; | 
 | } | 
 |  | 
 | /* | 
 |  * Check to see if xpc_notify_IRQ_handler() dropped any IPIs on the floor | 
 |  * because the write to their associated IPI amo completed after the IRQ/IPI | 
 |  * was received. | 
 |  */ | 
 | void | 
 | xpc_dropped_IPI_check(struct xpc_partition *part) | 
 | { | 
 | 	if (xpc_part_ref(part)) { | 
 | 		xpc_check_for_channel_activity(part); | 
 |  | 
 | 		part->dropped_IPI_timer.expires = jiffies + | 
 | 		    XPC_P_DROPPED_IPI_WAIT; | 
 | 		add_timer(&part->dropped_IPI_timer); | 
 | 		xpc_part_deref(part); | 
 | 	} | 
 | } | 
 |  | 
 | void | 
 | xpc_activate_kthreads(struct xpc_channel *ch, int needed) | 
 | { | 
 | 	int idle = atomic_read(&ch->kthreads_idle); | 
 | 	int assigned = atomic_read(&ch->kthreads_assigned); | 
 | 	int wakeup; | 
 |  | 
 | 	DBUG_ON(needed <= 0); | 
 |  | 
 | 	if (idle > 0) { | 
 | 		wakeup = (needed > idle) ? idle : needed; | 
 | 		needed -= wakeup; | 
 |  | 
 | 		dev_dbg(xpc_chan, "wakeup %d idle kthreads, partid=%d, " | 
 | 			"channel=%d\n", wakeup, ch->partid, ch->number); | 
 |  | 
 | 		/* only wakeup the requested number of kthreads */ | 
 | 		wake_up_nr(&ch->idle_wq, wakeup); | 
 | 	} | 
 |  | 
 | 	if (needed <= 0) | 
 | 		return; | 
 |  | 
 | 	if (needed + assigned > ch->kthreads_assigned_limit) { | 
 | 		needed = ch->kthreads_assigned_limit - assigned; | 
 | 		if (needed <= 0) | 
 | 			return; | 
 | 	} | 
 |  | 
 | 	dev_dbg(xpc_chan, "create %d new kthreads, partid=%d, channel=%d\n", | 
 | 		needed, ch->partid, ch->number); | 
 |  | 
 | 	xpc_create_kthreads(ch, needed, 0); | 
 | } | 
 |  | 
 | /* | 
 |  * This function is where XPC's kthreads wait for messages to deliver. | 
 |  */ | 
 | static void | 
 | xpc_kthread_waitmsgs(struct xpc_partition *part, struct xpc_channel *ch) | 
 | { | 
 | 	do { | 
 | 		/* deliver messages to their intended recipients */ | 
 |  | 
 | 		while (ch->w_local_GP.get < ch->w_remote_GP.put && | 
 | 		       !(ch->flags & XPC_C_DISCONNECTING)) { | 
 | 			xpc_deliver_msg(ch); | 
 | 		} | 
 |  | 
 | 		if (atomic_inc_return(&ch->kthreads_idle) > | 
 | 		    ch->kthreads_idle_limit) { | 
 | 			/* too many idle kthreads on this channel */ | 
 | 			atomic_dec(&ch->kthreads_idle); | 
 | 			break; | 
 | 		} | 
 |  | 
 | 		dev_dbg(xpc_chan, "idle kthread calling " | 
 | 			"wait_event_interruptible_exclusive()\n"); | 
 |  | 
 | 		(void)wait_event_interruptible_exclusive(ch->idle_wq, | 
 | 				(ch->w_local_GP.get < ch->w_remote_GP.put || | 
 | 				 (ch->flags & XPC_C_DISCONNECTING))); | 
 |  | 
 | 		atomic_dec(&ch->kthreads_idle); | 
 |  | 
 | 	} while (!(ch->flags & XPC_C_DISCONNECTING)); | 
 | } | 
 |  | 
 | static int | 
 | xpc_kthread_start(void *args) | 
 | { | 
 | 	short partid = XPC_UNPACK_ARG1(args); | 
 | 	u16 ch_number = XPC_UNPACK_ARG2(args); | 
 | 	struct xpc_partition *part = &xpc_partitions[partid]; | 
 | 	struct xpc_channel *ch; | 
 | 	int n_needed; | 
 | 	unsigned long irq_flags; | 
 |  | 
 | 	dev_dbg(xpc_chan, "kthread starting, partid=%d, channel=%d\n", | 
 | 		partid, ch_number); | 
 |  | 
 | 	ch = &part->channels[ch_number]; | 
 |  | 
 | 	if (!(ch->flags & XPC_C_DISCONNECTING)) { | 
 |  | 
 | 		/* let registerer know that connection has been established */ | 
 |  | 
 | 		spin_lock_irqsave(&ch->lock, irq_flags); | 
 | 		if (!(ch->flags & XPC_C_CONNECTEDCALLOUT)) { | 
 | 			ch->flags |= XPC_C_CONNECTEDCALLOUT; | 
 | 			spin_unlock_irqrestore(&ch->lock, irq_flags); | 
 |  | 
 | 			xpc_connected_callout(ch); | 
 |  | 
 | 			spin_lock_irqsave(&ch->lock, irq_flags); | 
 | 			ch->flags |= XPC_C_CONNECTEDCALLOUT_MADE; | 
 | 			spin_unlock_irqrestore(&ch->lock, irq_flags); | 
 |  | 
 | 			/* | 
 | 			 * It is possible that while the callout was being | 
 | 			 * made that the remote partition sent some messages. | 
 | 			 * If that is the case, we may need to activate | 
 | 			 * additional kthreads to help deliver them. We only | 
 | 			 * need one less than total #of messages to deliver. | 
 | 			 */ | 
 | 			n_needed = ch->w_remote_GP.put - ch->w_local_GP.get - 1; | 
 | 			if (n_needed > 0 && !(ch->flags & XPC_C_DISCONNECTING)) | 
 | 				xpc_activate_kthreads(ch, n_needed); | 
 |  | 
 | 		} else { | 
 | 			spin_unlock_irqrestore(&ch->lock, irq_flags); | 
 | 		} | 
 |  | 
 | 		xpc_kthread_waitmsgs(part, ch); | 
 | 	} | 
 |  | 
 | 	/* let registerer know that connection is disconnecting */ | 
 |  | 
 | 	spin_lock_irqsave(&ch->lock, irq_flags); | 
 | 	if ((ch->flags & XPC_C_CONNECTEDCALLOUT_MADE) && | 
 | 	    !(ch->flags & XPC_C_DISCONNECTINGCALLOUT)) { | 
 | 		ch->flags |= XPC_C_DISCONNECTINGCALLOUT; | 
 | 		spin_unlock_irqrestore(&ch->lock, irq_flags); | 
 |  | 
 | 		xpc_disconnect_callout(ch, xpDisconnecting); | 
 |  | 
 | 		spin_lock_irqsave(&ch->lock, irq_flags); | 
 | 		ch->flags |= XPC_C_DISCONNECTINGCALLOUT_MADE; | 
 | 	} | 
 | 	spin_unlock_irqrestore(&ch->lock, irq_flags); | 
 |  | 
 | 	if (atomic_dec_return(&ch->kthreads_assigned) == 0) { | 
 | 		if (atomic_dec_return(&part->nchannels_engaged) == 0) { | 
 | 			xpc_mark_partition_disengaged(part); | 
 | 			xpc_IPI_send_disengage(part); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	xpc_msgqueue_deref(ch); | 
 |  | 
 | 	dev_dbg(xpc_chan, "kthread exiting, partid=%d, channel=%d\n", | 
 | 		partid, ch_number); | 
 |  | 
 | 	xpc_part_deref(part); | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * For each partition that XPC has established communications with, there is | 
 |  * a minimum of one kernel thread assigned to perform any operation that | 
 |  * may potentially sleep or block (basically the callouts to the asynchronous | 
 |  * functions registered via xpc_connect()). | 
 |  * | 
 |  * Additional kthreads are created and destroyed by XPC as the workload | 
 |  * demands. | 
 |  * | 
 |  * A kthread is assigned to one of the active channels that exists for a given | 
 |  * partition. | 
 |  */ | 
 | void | 
 | xpc_create_kthreads(struct xpc_channel *ch, int needed, | 
 | 		    int ignore_disconnecting) | 
 | { | 
 | 	unsigned long irq_flags; | 
 | 	u64 args = XPC_PACK_ARGS(ch->partid, ch->number); | 
 | 	struct xpc_partition *part = &xpc_partitions[ch->partid]; | 
 | 	struct task_struct *kthread; | 
 |  | 
 | 	while (needed-- > 0) { | 
 |  | 
 | 		/* | 
 | 		 * The following is done on behalf of the newly created | 
 | 		 * kthread. That kthread is responsible for doing the | 
 | 		 * counterpart to the following before it exits. | 
 | 		 */ | 
 | 		if (ignore_disconnecting) { | 
 | 			if (!atomic_inc_not_zero(&ch->kthreads_assigned)) { | 
 | 				/* kthreads assigned had gone to zero */ | 
 | 				BUG_ON(!(ch->flags & | 
 | 					 XPC_C_DISCONNECTINGCALLOUT_MADE)); | 
 | 				break; | 
 | 			} | 
 |  | 
 | 		} else if (ch->flags & XPC_C_DISCONNECTING) { | 
 | 			break; | 
 |  | 
 | 		} else if (atomic_inc_return(&ch->kthreads_assigned) == 1) { | 
 | 			if (atomic_inc_return(&part->nchannels_engaged) == 1) | 
 | 				xpc_mark_partition_engaged(part); | 
 | 		} | 
 | 		(void)xpc_part_ref(part); | 
 | 		xpc_msgqueue_ref(ch); | 
 |  | 
 | 		kthread = kthread_run(xpc_kthread_start, (void *)args, | 
 | 				      "xpc%02dc%d", ch->partid, ch->number); | 
 | 		if (IS_ERR(kthread)) { | 
 | 			/* the fork failed */ | 
 |  | 
 | 			/* | 
 | 			 * NOTE: if (ignore_disconnecting && | 
 | 			 * !(ch->flags & XPC_C_DISCONNECTINGCALLOUT)) is true, | 
 | 			 * then we'll deadlock if all other kthreads assigned | 
 | 			 * to this channel are blocked in the channel's | 
 | 			 * registerer, because the only thing that will unblock | 
 | 			 * them is the xpDisconnecting callout that this | 
 | 			 * failed kthread_run() would have made. | 
 | 			 */ | 
 |  | 
 | 			if (atomic_dec_return(&ch->kthreads_assigned) == 0 && | 
 | 			    atomic_dec_return(&part->nchannels_engaged) == 0) { | 
 | 				xpc_mark_partition_disengaged(part); | 
 | 				xpc_IPI_send_disengage(part); | 
 | 			} | 
 | 			xpc_msgqueue_deref(ch); | 
 | 			xpc_part_deref(part); | 
 |  | 
 | 			if (atomic_read(&ch->kthreads_assigned) < | 
 | 			    ch->kthreads_idle_limit) { | 
 | 				/* | 
 | 				 * Flag this as an error only if we have an | 
 | 				 * insufficient #of kthreads for the channel | 
 | 				 * to function. | 
 | 				 */ | 
 | 				spin_lock_irqsave(&ch->lock, irq_flags); | 
 | 				XPC_DISCONNECT_CHANNEL(ch, xpLackOfResources, | 
 | 						       &irq_flags); | 
 | 				spin_unlock_irqrestore(&ch->lock, irq_flags); | 
 | 			} | 
 | 			break; | 
 | 		} | 
 | 	} | 
 | } | 
 |  | 
 | void | 
 | xpc_disconnect_wait(int ch_number) | 
 | { | 
 | 	unsigned long irq_flags; | 
 | 	short partid; | 
 | 	struct xpc_partition *part; | 
 | 	struct xpc_channel *ch; | 
 | 	int wakeup_channel_mgr; | 
 |  | 
 | 	/* now wait for all callouts to the caller's function to cease */ | 
 | 	for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) { | 
 | 		part = &xpc_partitions[partid]; | 
 |  | 
 | 		if (!xpc_part_ref(part)) | 
 | 			continue; | 
 |  | 
 | 		ch = &part->channels[ch_number]; | 
 |  | 
 | 		if (!(ch->flags & XPC_C_WDISCONNECT)) { | 
 | 			xpc_part_deref(part); | 
 | 			continue; | 
 | 		} | 
 |  | 
 | 		wait_for_completion(&ch->wdisconnect_wait); | 
 |  | 
 | 		spin_lock_irqsave(&ch->lock, irq_flags); | 
 | 		DBUG_ON(!(ch->flags & XPC_C_DISCONNECTED)); | 
 | 		wakeup_channel_mgr = 0; | 
 |  | 
 | 		if (ch->delayed_IPI_flags) { | 
 | 			if (part->act_state != XPC_P_DEACTIVATING) { | 
 | 				spin_lock(&part->IPI_lock); | 
 | 				XPC_SET_IPI_FLAGS(part->local_IPI_amo, | 
 | 						  ch->number, | 
 | 						  ch->delayed_IPI_flags); | 
 | 				spin_unlock(&part->IPI_lock); | 
 | 				wakeup_channel_mgr = 1; | 
 | 			} | 
 | 			ch->delayed_IPI_flags = 0; | 
 | 		} | 
 |  | 
 | 		ch->flags &= ~XPC_C_WDISCONNECT; | 
 | 		spin_unlock_irqrestore(&ch->lock, irq_flags); | 
 |  | 
 | 		if (wakeup_channel_mgr) | 
 | 			xpc_wakeup_channel_mgr(part); | 
 |  | 
 | 		xpc_part_deref(part); | 
 | 	} | 
 | } | 
 |  | 
 | static void | 
 | xpc_do_exit(enum xp_retval reason) | 
 | { | 
 | 	short partid; | 
 | 	int active_part_count, printed_waiting_msg = 0; | 
 | 	struct xpc_partition *part; | 
 | 	unsigned long printmsg_time, disengage_request_timeout = 0; | 
 |  | 
 | 	/* a 'rmmod XPC' and a 'reboot' cannot both end up here together */ | 
 | 	DBUG_ON(xpc_exiting == 1); | 
 |  | 
 | 	/* | 
 | 	 * Let the heartbeat checker thread and the discovery thread | 
 | 	 * (if one is running) know that they should exit. Also wake up | 
 | 	 * the heartbeat checker thread in case it's sleeping. | 
 | 	 */ | 
 | 	xpc_exiting = 1; | 
 | 	wake_up_interruptible(&xpc_act_IRQ_wq); | 
 |  | 
 | 	/* ignore all incoming interrupts */ | 
 | 	free_irq(SGI_XPC_ACTIVATE, NULL); | 
 |  | 
 | 	/* wait for the discovery thread to exit */ | 
 | 	wait_for_completion(&xpc_discovery_exited); | 
 |  | 
 | 	/* wait for the heartbeat checker thread to exit */ | 
 | 	wait_for_completion(&xpc_hb_checker_exited); | 
 |  | 
 | 	/* sleep for a 1/3 of a second or so */ | 
 | 	(void)msleep_interruptible(300); | 
 |  | 
 | 	/* wait for all partitions to become inactive */ | 
 |  | 
 | 	printmsg_time = jiffies + (XPC_DISENGAGE_PRINTMSG_INTERVAL * HZ); | 
 | 	xpc_disengage_request_timedout = 0; | 
 |  | 
 | 	do { | 
 | 		active_part_count = 0; | 
 |  | 
 | 		for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) { | 
 | 			part = &xpc_partitions[partid]; | 
 |  | 
 | 			if (xpc_partition_disengaged(part) && | 
 | 			    part->act_state == XPC_P_INACTIVE) { | 
 | 				continue; | 
 | 			} | 
 |  | 
 | 			active_part_count++; | 
 |  | 
 | 			XPC_DEACTIVATE_PARTITION(part, reason); | 
 |  | 
 | 			if (part->disengage_request_timeout > | 
 | 			    disengage_request_timeout) { | 
 | 				disengage_request_timeout = | 
 | 				    part->disengage_request_timeout; | 
 | 			} | 
 | 		} | 
 |  | 
 | 		if (xpc_partition_engaged(-1UL)) { | 
 | 			if (time_after(jiffies, printmsg_time)) { | 
 | 				dev_info(xpc_part, "waiting for remote " | 
 | 					 "partitions to disengage, timeout in " | 
 | 					 "%ld seconds\n", | 
 | 					 (disengage_request_timeout - jiffies) | 
 | 					 / HZ); | 
 | 				printmsg_time = jiffies + | 
 | 				    (XPC_DISENGAGE_PRINTMSG_INTERVAL * HZ); | 
 | 				printed_waiting_msg = 1; | 
 | 			} | 
 |  | 
 | 		} else if (active_part_count > 0) { | 
 | 			if (printed_waiting_msg) { | 
 | 				dev_info(xpc_part, "waiting for local partition" | 
 | 					 " to disengage\n"); | 
 | 				printed_waiting_msg = 0; | 
 | 			} | 
 |  | 
 | 		} else { | 
 | 			if (!xpc_disengage_request_timedout) { | 
 | 				dev_info(xpc_part, "all partitions have " | 
 | 					 "disengaged\n"); | 
 | 			} | 
 | 			break; | 
 | 		} | 
 |  | 
 | 		/* sleep for a 1/3 of a second or so */ | 
 | 		(void)msleep_interruptible(300); | 
 |  | 
 | 	} while (1); | 
 |  | 
 | 	DBUG_ON(xpc_partition_engaged(-1UL)); | 
 |  | 
 | 	/* indicate to others that our reserved page is uninitialized */ | 
 | 	xpc_rsvd_page->vars_pa = 0; | 
 |  | 
 | 	/* now it's time to eliminate our heartbeat */ | 
 | 	del_timer_sync(&xpc_hb_timer); | 
 | 	DBUG_ON(xpc_vars->heartbeating_to_mask != 0); | 
 |  | 
 | 	if (reason == xpUnloading) { | 
 | 		/* take ourselves off of the reboot_notifier_list */ | 
 | 		(void)unregister_reboot_notifier(&xpc_reboot_notifier); | 
 |  | 
 | 		/* take ourselves off of the die_notifier list */ | 
 | 		(void)unregister_die_notifier(&xpc_die_notifier); | 
 | 	} | 
 |  | 
 | 	/* close down protections for IPI operations */ | 
 | 	xpc_restrict_IPI_ops(); | 
 |  | 
 | 	/* clear the interface to XPC's functions */ | 
 | 	xpc_clear_interface(); | 
 |  | 
 | 	if (xpc_sysctl) | 
 | 		unregister_sysctl_table(xpc_sysctl); | 
 |  | 
 | 	kfree(xpc_remote_copy_buffer_base); | 
 | } | 
 |  | 
 | /* | 
 |  * This function is called when the system is being rebooted. | 
 |  */ | 
 | static int | 
 | xpc_system_reboot(struct notifier_block *nb, unsigned long event, void *unused) | 
 | { | 
 | 	enum xp_retval reason; | 
 |  | 
 | 	switch (event) { | 
 | 	case SYS_RESTART: | 
 | 		reason = xpSystemReboot; | 
 | 		break; | 
 | 	case SYS_HALT: | 
 | 		reason = xpSystemHalt; | 
 | 		break; | 
 | 	case SYS_POWER_OFF: | 
 | 		reason = xpSystemPoweroff; | 
 | 		break; | 
 | 	default: | 
 | 		reason = xpSystemGoingDown; | 
 | 	} | 
 |  | 
 | 	xpc_do_exit(reason); | 
 | 	return NOTIFY_DONE; | 
 | } | 
 |  | 
 | /* | 
 |  * Notify other partitions to disengage from all references to our memory. | 
 |  */ | 
 | static void | 
 | xpc_die_disengage(void) | 
 | { | 
 | 	struct xpc_partition *part; | 
 | 	short partid; | 
 | 	unsigned long engaged; | 
 | 	long time, printmsg_time, disengage_request_timeout; | 
 |  | 
 | 	/* keep xpc_hb_checker thread from doing anything (just in case) */ | 
 | 	xpc_exiting = 1; | 
 |  | 
 | 	xpc_vars->heartbeating_to_mask = 0;	/* indicate we're deactivated */ | 
 |  | 
 | 	for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) { | 
 | 		part = &xpc_partitions[partid]; | 
 |  | 
 | 		if (!XPC_SUPPORTS_DISENGAGE_REQUEST(part-> | 
 | 		    remote_vars_version)) { | 
 |  | 
 | 			/* just in case it was left set by an earlier XPC */ | 
 | 			xpc_clear_partition_engaged(1UL << partid); | 
 | 			continue; | 
 | 		} | 
 |  | 
 | 		if (xpc_partition_engaged(1UL << partid) || | 
 | 		    part->act_state != XPC_P_INACTIVE) { | 
 | 			xpc_request_partition_disengage(part); | 
 | 			xpc_mark_partition_disengaged(part); | 
 | 			xpc_IPI_send_disengage(part); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	time = rtc_time(); | 
 | 	printmsg_time = time + | 
 | 	    (XPC_DISENGAGE_PRINTMSG_INTERVAL * sn_rtc_cycles_per_second); | 
 | 	disengage_request_timeout = time + | 
 | 	    (xpc_disengage_request_timelimit * sn_rtc_cycles_per_second); | 
 |  | 
 | 	/* wait for all other partitions to disengage from us */ | 
 |  | 
 | 	while (1) { | 
 | 		engaged = xpc_partition_engaged(-1UL); | 
 | 		if (!engaged) { | 
 | 			dev_info(xpc_part, "all partitions have disengaged\n"); | 
 | 			break; | 
 | 		} | 
 |  | 
 | 		time = rtc_time(); | 
 | 		if (time >= disengage_request_timeout) { | 
 | 			for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) { | 
 | 				if (engaged & (1UL << partid)) { | 
 | 					dev_info(xpc_part, "disengage from " | 
 | 						 "remote partition %d timed " | 
 | 						 "out\n", partid); | 
 | 				} | 
 | 			} | 
 | 			break; | 
 | 		} | 
 |  | 
 | 		if (time >= printmsg_time) { | 
 | 			dev_info(xpc_part, "waiting for remote partitions to " | 
 | 				 "disengage, timeout in %ld seconds\n", | 
 | 				 (disengage_request_timeout - time) / | 
 | 				 sn_rtc_cycles_per_second); | 
 | 			printmsg_time = time + | 
 | 			    (XPC_DISENGAGE_PRINTMSG_INTERVAL * | 
 | 			     sn_rtc_cycles_per_second); | 
 | 		} | 
 | 	} | 
 | } | 
 |  | 
 | /* | 
 |  * This function is called when the system is being restarted or halted due | 
 |  * to some sort of system failure. If this is the case we need to notify the | 
 |  * other partitions to disengage from all references to our memory. | 
 |  * This function can also be called when our heartbeater could be offlined | 
 |  * for a time. In this case we need to notify other partitions to not worry | 
 |  * about the lack of a heartbeat. | 
 |  */ | 
 | static int | 
 | xpc_system_die(struct notifier_block *nb, unsigned long event, void *unused) | 
 | { | 
 | 	switch (event) { | 
 | 	case DIE_MACHINE_RESTART: | 
 | 	case DIE_MACHINE_HALT: | 
 | 		xpc_die_disengage(); | 
 | 		break; | 
 |  | 
 | 	case DIE_KDEBUG_ENTER: | 
 | 		/* Should lack of heartbeat be ignored by other partitions? */ | 
 | 		if (!xpc_kdebug_ignore) | 
 | 			break; | 
 |  | 
 | 		/* fall through */ | 
 | 	case DIE_MCA_MONARCH_ENTER: | 
 | 	case DIE_INIT_MONARCH_ENTER: | 
 | 		xpc_vars->heartbeat++; | 
 | 		xpc_vars->heartbeat_offline = 1; | 
 | 		break; | 
 |  | 
 | 	case DIE_KDEBUG_LEAVE: | 
 | 		/* Is lack of heartbeat being ignored by other partitions? */ | 
 | 		if (!xpc_kdebug_ignore) | 
 | 			break; | 
 |  | 
 | 		/* fall through */ | 
 | 	case DIE_MCA_MONARCH_LEAVE: | 
 | 	case DIE_INIT_MONARCH_LEAVE: | 
 | 		xpc_vars->heartbeat++; | 
 | 		xpc_vars->heartbeat_offline = 0; | 
 | 		break; | 
 | 	} | 
 |  | 
 | 	return NOTIFY_DONE; | 
 | } | 
 |  | 
 | int __init | 
 | xpc_init(void) | 
 | { | 
 | 	int ret; | 
 | 	short partid; | 
 | 	struct xpc_partition *part; | 
 | 	struct task_struct *kthread; | 
 | 	size_t buf_size; | 
 |  | 
 | 	if (!ia64_platform_is("sn2")) | 
 | 		return -ENODEV; | 
 |  | 
 | 	buf_size = max(XPC_RP_VARS_SIZE, | 
 | 		       XPC_RP_HEADER_SIZE + XP_NASID_MASK_BYTES); | 
 | 	xpc_remote_copy_buffer = xpc_kmalloc_cacheline_aligned(buf_size, | 
 | 							       GFP_KERNEL, | 
 | 						  &xpc_remote_copy_buffer_base); | 
 | 	if (xpc_remote_copy_buffer == NULL) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	snprintf(xpc_part->bus_id, BUS_ID_SIZE, "part"); | 
 | 	snprintf(xpc_chan->bus_id, BUS_ID_SIZE, "chan"); | 
 |  | 
 | 	xpc_sysctl = register_sysctl_table(xpc_sys_dir); | 
 |  | 
 | 	/* | 
 | 	 * The first few fields of each entry of xpc_partitions[] need to | 
 | 	 * be initialized now so that calls to xpc_connect() and | 
 | 	 * xpc_disconnect() can be made prior to the activation of any remote | 
 | 	 * partition. NOTE THAT NONE OF THE OTHER FIELDS BELONGING TO THESE | 
 | 	 * ENTRIES ARE MEANINGFUL UNTIL AFTER AN ENTRY'S CORRESPONDING | 
 | 	 * PARTITION HAS BEEN ACTIVATED. | 
 | 	 */ | 
 | 	for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) { | 
 | 		part = &xpc_partitions[partid]; | 
 |  | 
 | 		DBUG_ON((u64)part != L1_CACHE_ALIGN((u64)part)); | 
 |  | 
 | 		part->act_IRQ_rcvd = 0; | 
 | 		spin_lock_init(&part->act_lock); | 
 | 		part->act_state = XPC_P_INACTIVE; | 
 | 		XPC_SET_REASON(part, 0, 0); | 
 |  | 
 | 		init_timer(&part->disengage_request_timer); | 
 | 		part->disengage_request_timer.function = | 
 | 		    xpc_timeout_partition_disengage_request; | 
 | 		part->disengage_request_timer.data = (unsigned long)part; | 
 |  | 
 | 		part->setup_state = XPC_P_UNSET; | 
 | 		init_waitqueue_head(&part->teardown_wq); | 
 | 		atomic_set(&part->references, 0); | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * Open up protections for IPI operations (and AMO operations on | 
 | 	 * Shub 1.1 systems). | 
 | 	 */ | 
 | 	xpc_allow_IPI_ops(); | 
 |  | 
 | 	/* | 
 | 	 * Interrupts being processed will increment this atomic variable and | 
 | 	 * awaken the heartbeat thread which will process the interrupts. | 
 | 	 */ | 
 | 	atomic_set(&xpc_act_IRQ_rcvd, 0); | 
 |  | 
 | 	/* | 
 | 	 * This is safe to do before the xpc_hb_checker thread has started | 
 | 	 * because the handler releases a wait queue.  If an interrupt is | 
 | 	 * received before the thread is waiting, it will not go to sleep, | 
 | 	 * but rather immediately process the interrupt. | 
 | 	 */ | 
 | 	ret = request_irq(SGI_XPC_ACTIVATE, xpc_act_IRQ_handler, 0, | 
 | 			  "xpc hb", NULL); | 
 | 	if (ret != 0) { | 
 | 		dev_err(xpc_part, "can't register ACTIVATE IRQ handler, " | 
 | 			"errno=%d\n", -ret); | 
 |  | 
 | 		xpc_restrict_IPI_ops(); | 
 |  | 
 | 		if (xpc_sysctl) | 
 | 			unregister_sysctl_table(xpc_sysctl); | 
 |  | 
 | 		kfree(xpc_remote_copy_buffer_base); | 
 | 		return -EBUSY; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * Fill the partition reserved page with the information needed by | 
 | 	 * other partitions to discover we are alive and establish initial | 
 | 	 * communications. | 
 | 	 */ | 
 | 	xpc_rsvd_page = xpc_rsvd_page_init(); | 
 | 	if (xpc_rsvd_page == NULL) { | 
 | 		dev_err(xpc_part, "could not setup our reserved page\n"); | 
 |  | 
 | 		free_irq(SGI_XPC_ACTIVATE, NULL); | 
 | 		xpc_restrict_IPI_ops(); | 
 |  | 
 | 		if (xpc_sysctl) | 
 | 			unregister_sysctl_table(xpc_sysctl); | 
 |  | 
 | 		kfree(xpc_remote_copy_buffer_base); | 
 | 		return -EBUSY; | 
 | 	} | 
 |  | 
 | 	/* add ourselves to the reboot_notifier_list */ | 
 | 	ret = register_reboot_notifier(&xpc_reboot_notifier); | 
 | 	if (ret != 0) | 
 | 		dev_warn(xpc_part, "can't register reboot notifier\n"); | 
 |  | 
 | 	/* add ourselves to the die_notifier list */ | 
 | 	ret = register_die_notifier(&xpc_die_notifier); | 
 | 	if (ret != 0) | 
 | 		dev_warn(xpc_part, "can't register die notifier\n"); | 
 |  | 
 | 	init_timer(&xpc_hb_timer); | 
 | 	xpc_hb_timer.function = xpc_hb_beater; | 
 |  | 
 | 	/* | 
 | 	 * The real work-horse behind xpc.  This processes incoming | 
 | 	 * interrupts and monitors remote heartbeats. | 
 | 	 */ | 
 | 	kthread = kthread_run(xpc_hb_checker, NULL, XPC_HB_CHECK_THREAD_NAME); | 
 | 	if (IS_ERR(kthread)) { | 
 | 		dev_err(xpc_part, "failed while forking hb check thread\n"); | 
 |  | 
 | 		/* indicate to others that our reserved page is uninitialized */ | 
 | 		xpc_rsvd_page->vars_pa = 0; | 
 |  | 
 | 		/* take ourselves off of the reboot_notifier_list */ | 
 | 		(void)unregister_reboot_notifier(&xpc_reboot_notifier); | 
 |  | 
 | 		/* take ourselves off of the die_notifier list */ | 
 | 		(void)unregister_die_notifier(&xpc_die_notifier); | 
 |  | 
 | 		del_timer_sync(&xpc_hb_timer); | 
 | 		free_irq(SGI_XPC_ACTIVATE, NULL); | 
 | 		xpc_restrict_IPI_ops(); | 
 |  | 
 | 		if (xpc_sysctl) | 
 | 			unregister_sysctl_table(xpc_sysctl); | 
 |  | 
 | 		kfree(xpc_remote_copy_buffer_base); | 
 | 		return -EBUSY; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * Startup a thread that will attempt to discover other partitions to | 
 | 	 * activate based on info provided by SAL. This new thread is short | 
 | 	 * lived and will exit once discovery is complete. | 
 | 	 */ | 
 | 	kthread = kthread_run(xpc_initiate_discovery, NULL, | 
 | 			      XPC_DISCOVERY_THREAD_NAME); | 
 | 	if (IS_ERR(kthread)) { | 
 | 		dev_err(xpc_part, "failed while forking discovery thread\n"); | 
 |  | 
 | 		/* mark this new thread as a non-starter */ | 
 | 		complete(&xpc_discovery_exited); | 
 |  | 
 | 		xpc_do_exit(xpUnloading); | 
 | 		return -EBUSY; | 
 | 	} | 
 |  | 
 | 	/* set the interface to point at XPC's functions */ | 
 | 	xpc_set_interface(xpc_initiate_connect, xpc_initiate_disconnect, | 
 | 			  xpc_initiate_allocate, xpc_initiate_send, | 
 | 			  xpc_initiate_send_notify, xpc_initiate_received, | 
 | 			  xpc_initiate_partid_to_nasids); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | module_init(xpc_init); | 
 |  | 
 | void __exit | 
 | xpc_exit(void) | 
 | { | 
 | 	xpc_do_exit(xpUnloading); | 
 | } | 
 |  | 
 | module_exit(xpc_exit); | 
 |  | 
 | MODULE_AUTHOR("Silicon Graphics, Inc."); | 
 | MODULE_DESCRIPTION("Cross Partition Communication (XPC) support"); | 
 | MODULE_LICENSE("GPL"); | 
 |  | 
 | module_param(xpc_hb_interval, int, 0); | 
 | MODULE_PARM_DESC(xpc_hb_interval, "Number of seconds between " | 
 | 		 "heartbeat increments."); | 
 |  | 
 | module_param(xpc_hb_check_interval, int, 0); | 
 | MODULE_PARM_DESC(xpc_hb_check_interval, "Number of seconds between " | 
 | 		 "heartbeat checks."); | 
 |  | 
 | module_param(xpc_disengage_request_timelimit, int, 0); | 
 | MODULE_PARM_DESC(xpc_disengage_request_timelimit, "Number of seconds to wait " | 
 | 		 "for disengage request to complete."); | 
 |  | 
 | module_param(xpc_kdebug_ignore, int, 0); | 
 | MODULE_PARM_DESC(xpc_kdebug_ignore, "Should lack of heartbeat be ignored by " | 
 | 		 "other partitions when dropping into kdebug."); |