|  | 
 | #include <linux/kernel.h> | 
 | #include <linux/fs.h> | 
 | #include <linux/minix_fs.h> | 
 | #include <linux/ext2_fs.h> | 
 | #include <linux/romfs_fs.h> | 
 | #include <linux/cramfs_fs.h> | 
 | #include <linux/initrd.h> | 
 | #include <linux/string.h> | 
 |  | 
 | #include "do_mounts.h" | 
 |  | 
 | #define BUILD_CRAMDISK | 
 |  | 
 | int __initdata rd_prompt = 1;/* 1 = prompt for RAM disk, 0 = don't prompt */ | 
 |  | 
 | static int __init prompt_ramdisk(char *str) | 
 | { | 
 | 	rd_prompt = simple_strtol(str,NULL,0) & 1; | 
 | 	return 1; | 
 | } | 
 | __setup("prompt_ramdisk=", prompt_ramdisk); | 
 |  | 
 | int __initdata rd_image_start;		/* starting block # of image */ | 
 |  | 
 | static int __init ramdisk_start_setup(char *str) | 
 | { | 
 | 	rd_image_start = simple_strtol(str,NULL,0); | 
 | 	return 1; | 
 | } | 
 | __setup("ramdisk_start=", ramdisk_start_setup); | 
 |  | 
 | static int __init crd_load(int in_fd, int out_fd); | 
 |  | 
 | /* | 
 |  * This routine tries to find a RAM disk image to load, and returns the | 
 |  * number of blocks to read for a non-compressed image, 0 if the image | 
 |  * is a compressed image, and -1 if an image with the right magic | 
 |  * numbers could not be found. | 
 |  * | 
 |  * We currently check for the following magic numbers: | 
 |  * 	minix | 
 |  * 	ext2 | 
 |  *	romfs | 
 |  *	cramfs | 
 |  * 	gzip | 
 |  */ | 
 | static int __init  | 
 | identify_ramdisk_image(int fd, int start_block) | 
 | { | 
 | 	const int size = 512; | 
 | 	struct minix_super_block *minixsb; | 
 | 	struct ext2_super_block *ext2sb; | 
 | 	struct romfs_super_block *romfsb; | 
 | 	struct cramfs_super *cramfsb; | 
 | 	int nblocks = -1; | 
 | 	unsigned char *buf; | 
 |  | 
 | 	buf = kmalloc(size, GFP_KERNEL); | 
 | 	if (buf == 0) | 
 | 		return -1; | 
 |  | 
 | 	minixsb = (struct minix_super_block *) buf; | 
 | 	ext2sb = (struct ext2_super_block *) buf; | 
 | 	romfsb = (struct romfs_super_block *) buf; | 
 | 	cramfsb = (struct cramfs_super *) buf; | 
 | 	memset(buf, 0xe5, size); | 
 |  | 
 | 	/* | 
 | 	 * Read block 0 to test for gzipped kernel | 
 | 	 */ | 
 | 	sys_lseek(fd, start_block * BLOCK_SIZE, 0); | 
 | 	sys_read(fd, buf, size); | 
 |  | 
 | 	/* | 
 | 	 * If it matches the gzip magic numbers, return -1 | 
 | 	 */ | 
 | 	if (buf[0] == 037 && ((buf[1] == 0213) || (buf[1] == 0236))) { | 
 | 		printk(KERN_NOTICE | 
 | 		       "RAMDISK: Compressed image found at block %d\n", | 
 | 		       start_block); | 
 | 		nblocks = 0; | 
 | 		goto done; | 
 | 	} | 
 |  | 
 | 	/* romfs is at block zero too */ | 
 | 	if (romfsb->word0 == ROMSB_WORD0 && | 
 | 	    romfsb->word1 == ROMSB_WORD1) { | 
 | 		printk(KERN_NOTICE | 
 | 		       "RAMDISK: romfs filesystem found at block %d\n", | 
 | 		       start_block); | 
 | 		nblocks = (ntohl(romfsb->size)+BLOCK_SIZE-1)>>BLOCK_SIZE_BITS; | 
 | 		goto done; | 
 | 	} | 
 |  | 
 | 	if (cramfsb->magic == CRAMFS_MAGIC) { | 
 | 		printk(KERN_NOTICE | 
 | 		       "RAMDISK: cramfs filesystem found at block %d\n", | 
 | 		       start_block); | 
 | 		nblocks = (cramfsb->size + BLOCK_SIZE - 1) >> BLOCK_SIZE_BITS; | 
 | 		goto done; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * Read block 1 to test for minix and ext2 superblock | 
 | 	 */ | 
 | 	sys_lseek(fd, (start_block+1) * BLOCK_SIZE, 0); | 
 | 	sys_read(fd, buf, size); | 
 |  | 
 | 	/* Try minix */ | 
 | 	if (minixsb->s_magic == MINIX_SUPER_MAGIC || | 
 | 	    minixsb->s_magic == MINIX_SUPER_MAGIC2) { | 
 | 		printk(KERN_NOTICE | 
 | 		       "RAMDISK: Minix filesystem found at block %d\n", | 
 | 		       start_block); | 
 | 		nblocks = minixsb->s_nzones << minixsb->s_log_zone_size; | 
 | 		goto done; | 
 | 	} | 
 |  | 
 | 	/* Try ext2 */ | 
 | 	if (ext2sb->s_magic == cpu_to_le16(EXT2_SUPER_MAGIC)) { | 
 | 		printk(KERN_NOTICE | 
 | 		       "RAMDISK: ext2 filesystem found at block %d\n", | 
 | 		       start_block); | 
 | 		nblocks = le32_to_cpu(ext2sb->s_blocks_count) << | 
 | 			le32_to_cpu(ext2sb->s_log_block_size); | 
 | 		goto done; | 
 | 	} | 
 |  | 
 | 	printk(KERN_NOTICE | 
 | 	       "RAMDISK: Couldn't find valid RAM disk image starting at %d.\n", | 
 | 	       start_block); | 
 | 	 | 
 | done: | 
 | 	sys_lseek(fd, start_block * BLOCK_SIZE, 0); | 
 | 	kfree(buf); | 
 | 	return nblocks; | 
 | } | 
 |  | 
 | int __init rd_load_image(char *from) | 
 | { | 
 | 	int res = 0; | 
 | 	int in_fd, out_fd; | 
 | 	unsigned long rd_blocks, devblocks; | 
 | 	int nblocks, i, disk; | 
 | 	char *buf = NULL; | 
 | 	unsigned short rotate = 0; | 
 | #if !defined(CONFIG_S390) && !defined(CONFIG_PPC_ISERIES) | 
 | 	char rotator[4] = { '|' , '/' , '-' , '\\' }; | 
 | #endif | 
 |  | 
 | 	out_fd = sys_open("/dev/ram", O_RDWR, 0); | 
 | 	if (out_fd < 0) | 
 | 		goto out; | 
 |  | 
 | 	in_fd = sys_open(from, O_RDONLY, 0); | 
 | 	if (in_fd < 0) | 
 | 		goto noclose_input; | 
 |  | 
 | 	nblocks = identify_ramdisk_image(in_fd, rd_image_start); | 
 | 	if (nblocks < 0) | 
 | 		goto done; | 
 |  | 
 | 	if (nblocks == 0) { | 
 | #ifdef BUILD_CRAMDISK | 
 | 		if (crd_load(in_fd, out_fd) == 0) | 
 | 			goto successful_load; | 
 | #else | 
 | 		printk(KERN_NOTICE | 
 | 		       "RAMDISK: Kernel does not support compressed " | 
 | 		       "RAM disk images\n"); | 
 | #endif | 
 | 		goto done; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * NOTE NOTE: nblocks is not actually blocks but | 
 | 	 * the number of kibibytes of data to load into a ramdisk. | 
 | 	 * So any ramdisk block size that is a multiple of 1KiB should | 
 | 	 * work when the appropriate ramdisk_blocksize is specified | 
 | 	 * on the command line. | 
 | 	 * | 
 | 	 * The default ramdisk_blocksize is 1KiB and it is generally | 
 | 	 * silly to use anything else, so make sure to use 1KiB | 
 | 	 * blocksize while generating ext2fs ramdisk-images. | 
 | 	 */ | 
 | 	if (sys_ioctl(out_fd, BLKGETSIZE, (unsigned long)&rd_blocks) < 0) | 
 | 		rd_blocks = 0; | 
 | 	else | 
 | 		rd_blocks >>= 1; | 
 |  | 
 | 	if (nblocks > rd_blocks) { | 
 | 		printk("RAMDISK: image too big! (%dKiB/%ldKiB)\n", | 
 | 		       nblocks, rd_blocks); | 
 | 		goto done; | 
 | 	} | 
 | 		 | 
 | 	/* | 
 | 	 * OK, time to copy in the data | 
 | 	 */ | 
 | 	if (sys_ioctl(in_fd, BLKGETSIZE, (unsigned long)&devblocks) < 0) | 
 | 		devblocks = 0; | 
 | 	else | 
 | 		devblocks >>= 1; | 
 |  | 
 | 	if (strcmp(from, "/initrd.image") == 0) | 
 | 		devblocks = nblocks; | 
 |  | 
 | 	if (devblocks == 0) { | 
 | 		printk(KERN_ERR "RAMDISK: could not determine device size\n"); | 
 | 		goto done; | 
 | 	} | 
 |  | 
 | 	buf = kmalloc(BLOCK_SIZE, GFP_KERNEL); | 
 | 	if (buf == 0) { | 
 | 		printk(KERN_ERR "RAMDISK: could not allocate buffer\n"); | 
 | 		goto done; | 
 | 	} | 
 |  | 
 | 	printk(KERN_NOTICE "RAMDISK: Loading %dKiB [%ld disk%s] into ram disk... ", | 
 | 		nblocks, ((nblocks-1)/devblocks)+1, nblocks>devblocks ? "s" : ""); | 
 | 	for (i = 0, disk = 1; i < nblocks; i++) { | 
 | 		if (i && (i % devblocks == 0)) { | 
 | 			printk("done disk #%d.\n", disk++); | 
 | 			rotate = 0; | 
 | 			if (sys_close(in_fd)) { | 
 | 				printk("Error closing the disk.\n"); | 
 | 				goto noclose_input; | 
 | 			} | 
 | 			change_floppy("disk #%d", disk); | 
 | 			in_fd = sys_open(from, O_RDONLY, 0); | 
 | 			if (in_fd < 0)  { | 
 | 				printk("Error opening disk.\n"); | 
 | 				goto noclose_input; | 
 | 			} | 
 | 			printk("Loading disk #%d... ", disk); | 
 | 		} | 
 | 		sys_read(in_fd, buf, BLOCK_SIZE); | 
 | 		sys_write(out_fd, buf, BLOCK_SIZE); | 
 | #if !defined(CONFIG_S390) && !defined(CONFIG_PPC_ISERIES) | 
 | 		if (!(i % 16)) { | 
 | 			printk("%c\b", rotator[rotate & 0x3]); | 
 | 			rotate++; | 
 | 		} | 
 | #endif | 
 | 	} | 
 | 	printk("done.\n"); | 
 |  | 
 | successful_load: | 
 | 	res = 1; | 
 | done: | 
 | 	sys_close(in_fd); | 
 | noclose_input: | 
 | 	sys_close(out_fd); | 
 | out: | 
 | 	kfree(buf); | 
 | 	sys_unlink("/dev/ram"); | 
 | 	return res; | 
 | } | 
 |  | 
 | int __init rd_load_disk(int n) | 
 | { | 
 | 	if (rd_prompt) | 
 | 		change_floppy("root floppy disk to be loaded into RAM disk"); | 
 | 	create_dev("/dev/root", ROOT_DEV, root_device_name); | 
 | 	create_dev("/dev/ram", MKDEV(RAMDISK_MAJOR, n), NULL); | 
 | 	return rd_load_image("/dev/root"); | 
 | } | 
 |  | 
 | #ifdef BUILD_CRAMDISK | 
 |  | 
 | /* | 
 |  * gzip declarations | 
 |  */ | 
 |  | 
 | #define OF(args)  args | 
 |  | 
 | #ifndef memzero | 
 | #define memzero(s, n)     memset ((s), 0, (n)) | 
 | #endif | 
 |  | 
 | typedef unsigned char  uch; | 
 | typedef unsigned short ush; | 
 | typedef unsigned long  ulg; | 
 |  | 
 | #define INBUFSIZ 4096 | 
 | #define WSIZE 0x8000    /* window size--must be a power of two, and */ | 
 | 			/*  at least 32K for zip's deflate method */ | 
 |  | 
 | static uch *inbuf; | 
 | static uch *window; | 
 |  | 
 | static unsigned insize;  /* valid bytes in inbuf */ | 
 | static unsigned inptr;   /* index of next byte to be processed in inbuf */ | 
 | static unsigned outcnt;  /* bytes in output buffer */ | 
 | static int exit_code; | 
 | static int unzip_error; | 
 | static long bytes_out; | 
 | static int crd_infd, crd_outfd; | 
 |  | 
 | #define get_byte()  (inptr < insize ? inbuf[inptr++] : fill_inbuf()) | 
 | 		 | 
 | /* Diagnostic functions (stubbed out) */ | 
 | #define Assert(cond,msg) | 
 | #define Trace(x) | 
 | #define Tracev(x) | 
 | #define Tracevv(x) | 
 | #define Tracec(c,x) | 
 | #define Tracecv(c,x) | 
 |  | 
 | #define STATIC static | 
 | #define INIT __init | 
 |  | 
 | static int  __init fill_inbuf(void); | 
 | static void __init flush_window(void); | 
 | static void __init *malloc(size_t size); | 
 | static void __init free(void *where); | 
 | static void __init error(char *m); | 
 | static void __init gzip_mark(void **); | 
 | static void __init gzip_release(void **); | 
 |  | 
 | #include "../lib/inflate.c" | 
 |  | 
 | static void __init *malloc(size_t size) | 
 | { | 
 | 	return kmalloc(size, GFP_KERNEL); | 
 | } | 
 |  | 
 | static void __init free(void *where) | 
 | { | 
 | 	kfree(where); | 
 | } | 
 |  | 
 | static void __init gzip_mark(void **ptr) | 
 | { | 
 | } | 
 |  | 
 | static void __init gzip_release(void **ptr) | 
 | { | 
 | } | 
 |  | 
 |  | 
 | /* =========================================================================== | 
 |  * Fill the input buffer. This is called only when the buffer is empty | 
 |  * and at least one byte is really needed. | 
 |  * Returning -1 does not guarantee that gunzip() will ever return. | 
 |  */ | 
 | static int __init fill_inbuf(void) | 
 | { | 
 | 	if (exit_code) return -1; | 
 | 	 | 
 | 	insize = sys_read(crd_infd, inbuf, INBUFSIZ); | 
 | 	if (insize == 0) { | 
 | 		error("RAMDISK: ran out of compressed data"); | 
 | 		return -1; | 
 | 	} | 
 |  | 
 | 	inptr = 1; | 
 |  | 
 | 	return inbuf[0]; | 
 | } | 
 |  | 
 | /* =========================================================================== | 
 |  * Write the output window window[0..outcnt-1] and update crc and bytes_out. | 
 |  * (Used for the decompressed data only.) | 
 |  */ | 
 | static void __init flush_window(void) | 
 | { | 
 |     ulg c = crc;         /* temporary variable */ | 
 |     unsigned n, written; | 
 |     uch *in, ch; | 
 |      | 
 |     written = sys_write(crd_outfd, window, outcnt); | 
 |     if (written != outcnt && unzip_error == 0) { | 
 | 	printk(KERN_ERR "RAMDISK: incomplete write (%d != %d) %ld\n", | 
 | 	       written, outcnt, bytes_out); | 
 | 	unzip_error = 1; | 
 |     } | 
 |     in = window; | 
 |     for (n = 0; n < outcnt; n++) { | 
 | 	    ch = *in++; | 
 | 	    c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8); | 
 |     } | 
 |     crc = c; | 
 |     bytes_out += (ulg)outcnt; | 
 |     outcnt = 0; | 
 | } | 
 |  | 
 | static void __init error(char *x) | 
 | { | 
 | 	printk(KERN_ERR "%s\n", x); | 
 | 	exit_code = 1; | 
 | 	unzip_error = 1; | 
 | } | 
 |  | 
 | static int __init crd_load(int in_fd, int out_fd) | 
 | { | 
 | 	int result; | 
 |  | 
 | 	insize = 0;		/* valid bytes in inbuf */ | 
 | 	inptr = 0;		/* index of next byte to be processed in inbuf */ | 
 | 	outcnt = 0;		/* bytes in output buffer */ | 
 | 	exit_code = 0; | 
 | 	bytes_out = 0; | 
 | 	crc = (ulg)0xffffffffL; /* shift register contents */ | 
 |  | 
 | 	crd_infd = in_fd; | 
 | 	crd_outfd = out_fd; | 
 | 	inbuf = kmalloc(INBUFSIZ, GFP_KERNEL); | 
 | 	if (inbuf == 0) { | 
 | 		printk(KERN_ERR "RAMDISK: Couldn't allocate gzip buffer\n"); | 
 | 		return -1; | 
 | 	} | 
 | 	window = kmalloc(WSIZE, GFP_KERNEL); | 
 | 	if (window == 0) { | 
 | 		printk(KERN_ERR "RAMDISK: Couldn't allocate gzip window\n"); | 
 | 		kfree(inbuf); | 
 | 		return -1; | 
 | 	} | 
 | 	makecrc(); | 
 | 	result = gunzip(); | 
 | 	if (unzip_error) | 
 | 		result = 1; | 
 | 	kfree(inbuf); | 
 | 	kfree(window); | 
 | 	return result; | 
 | } | 
 |  | 
 | #endif  /* BUILD_CRAMDISK */ |