| /* | 
 |  * Copyright(c) 2007 Intel Corporation. All rights reserved. | 
 |  * Copyright(c) 2008 Red Hat, Inc.  All rights reserved. | 
 |  * Copyright(c) 2008 Mike Christie | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or modify it | 
 |  * under the terms and conditions of the GNU General Public License, | 
 |  * version 2, as published by the Free Software Foundation. | 
 |  * | 
 |  * This program is distributed in the hope it will be useful, but WITHOUT | 
 |  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | 
 |  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for | 
 |  * more details. | 
 |  * | 
 |  * You should have received a copy of the GNU General Public License along with | 
 |  * this program; if not, write to the Free Software Foundation, Inc., | 
 |  * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. | 
 |  * | 
 |  * Maintained at www.Open-FCoE.org | 
 |  */ | 
 |  | 
 | /* | 
 |  * Fibre Channel exchange and sequence handling. | 
 |  */ | 
 |  | 
 | #include <linux/timer.h> | 
 | #include <linux/gfp.h> | 
 | #include <linux/err.h> | 
 |  | 
 | #include <scsi/fc/fc_fc2.h> | 
 |  | 
 | #include <scsi/libfc.h> | 
 | #include <scsi/fc_encode.h> | 
 |  | 
 | #define	  FC_DEF_R_A_TOV      (10 * 1000) /* resource allocation timeout */ | 
 |  | 
 | /* | 
 |  * fc_exch_debug can be set in debugger or at compile time to get more logs. | 
 |  */ | 
 | static int fc_exch_debug; | 
 |  | 
 | #define FC_DEBUG_EXCH(fmt...)			\ | 
 | 	do {					\ | 
 | 		if (fc_exch_debug)		\ | 
 | 			FC_DBG(fmt);		\ | 
 | 	} while (0) | 
 |  | 
 | static struct kmem_cache *fc_em_cachep;	/* cache for exchanges */ | 
 |  | 
 | /* | 
 |  * Structure and function definitions for managing Fibre Channel Exchanges | 
 |  * and Sequences. | 
 |  * | 
 |  * The three primary structures used here are fc_exch_mgr, fc_exch, and fc_seq. | 
 |  * | 
 |  * fc_exch_mgr holds the exchange state for an N port | 
 |  * | 
 |  * fc_exch holds state for one exchange and links to its active sequence. | 
 |  * | 
 |  * fc_seq holds the state for an individual sequence. | 
 |  */ | 
 |  | 
 | /* | 
 |  * Exchange manager. | 
 |  * | 
 |  * This structure is the center for creating exchanges and sequences. | 
 |  * It manages the allocation of exchange IDs. | 
 |  */ | 
 | struct fc_exch_mgr { | 
 | 	enum fc_class	class;		/* default class for sequences */ | 
 | 	spinlock_t	em_lock;	/* exchange manager lock, | 
 | 					   must be taken before ex_lock */ | 
 | 	u16		last_xid;	/* last allocated exchange ID */ | 
 | 	u16		min_xid;	/* min exchange ID */ | 
 | 	u16		max_xid;	/* max exchange ID */ | 
 | 	u16		max_read;	/* max exchange ID for read */ | 
 | 	u16		last_read;	/* last xid allocated for read */ | 
 | 	u32	total_exches;		/* total allocated exchanges */ | 
 | 	struct list_head	ex_list;	/* allocated exchanges list */ | 
 | 	struct fc_lport	*lp;		/* fc device instance */ | 
 | 	mempool_t	*ep_pool;	/* reserve ep's */ | 
 |  | 
 | 	/* | 
 | 	 * currently exchange mgr stats are updated but not used. | 
 | 	 * either stats can be expose via sysfs or remove them | 
 | 	 * all together if not used XXX | 
 | 	 */ | 
 | 	struct { | 
 | 		atomic_t no_free_exch; | 
 | 		atomic_t no_free_exch_xid; | 
 | 		atomic_t xid_not_found; | 
 | 		atomic_t xid_busy; | 
 | 		atomic_t seq_not_found; | 
 | 		atomic_t non_bls_resp; | 
 | 	} stats; | 
 | 	struct fc_exch **exches;	/* for exch pointers indexed by xid */ | 
 | }; | 
 | #define	fc_seq_exch(sp) container_of(sp, struct fc_exch, seq) | 
 |  | 
 | static void fc_exch_rrq(struct fc_exch *); | 
 | static void fc_seq_ls_acc(struct fc_seq *); | 
 | static void fc_seq_ls_rjt(struct fc_seq *, enum fc_els_rjt_reason, | 
 | 			  enum fc_els_rjt_explan); | 
 | static void fc_exch_els_rec(struct fc_seq *, struct fc_frame *); | 
 | static void fc_exch_els_rrq(struct fc_seq *, struct fc_frame *); | 
 | static struct fc_seq *fc_seq_start_next_locked(struct fc_seq *sp); | 
 |  | 
 | /* | 
 |  * Internal implementation notes. | 
 |  * | 
 |  * The exchange manager is one by default in libfc but LLD may choose | 
 |  * to have one per CPU. The sequence manager is one per exchange manager | 
 |  * and currently never separated. | 
 |  * | 
 |  * Section 9.8 in FC-FS-2 specifies:  "The SEQ_ID is a one-byte field | 
 |  * assigned by the Sequence Initiator that shall be unique for a specific | 
 |  * D_ID and S_ID pair while the Sequence is open."   Note that it isn't | 
 |  * qualified by exchange ID, which one might think it would be. | 
 |  * In practice this limits the number of open sequences and exchanges to 256 | 
 |  * per session.	 For most targets we could treat this limit as per exchange. | 
 |  * | 
 |  * The exchange and its sequence are freed when the last sequence is received. | 
 |  * It's possible for the remote port to leave an exchange open without | 
 |  * sending any sequences. | 
 |  * | 
 |  * Notes on reference counts: | 
 |  * | 
 |  * Exchanges are reference counted and exchange gets freed when the reference | 
 |  * count becomes zero. | 
 |  * | 
 |  * Timeouts: | 
 |  * Sequences are timed out for E_D_TOV and R_A_TOV. | 
 |  * | 
 |  * Sequence event handling: | 
 |  * | 
 |  * The following events may occur on initiator sequences: | 
 |  * | 
 |  *	Send. | 
 |  *	    For now, the whole thing is sent. | 
 |  *	Receive ACK | 
 |  *	    This applies only to class F. | 
 |  *	    The sequence is marked complete. | 
 |  *	ULP completion. | 
 |  *	    The upper layer calls fc_exch_done() when done | 
 |  *	    with exchange and sequence tuple. | 
 |  *	RX-inferred completion. | 
 |  *	    When we receive the next sequence on the same exchange, we can | 
 |  *	    retire the previous sequence ID.  (XXX not implemented). | 
 |  *	Timeout. | 
 |  *	    R_A_TOV frees the sequence ID.  If we're waiting for ACK, | 
 |  *	    E_D_TOV causes abort and calls upper layer response handler | 
 |  *	    with FC_EX_TIMEOUT error. | 
 |  *	Receive RJT | 
 |  *	    XXX defer. | 
 |  *	Send ABTS | 
 |  *	    On timeout. | 
 |  * | 
 |  * The following events may occur on recipient sequences: | 
 |  * | 
 |  *	Receive | 
 |  *	    Allocate sequence for first frame received. | 
 |  *	    Hold during receive handler. | 
 |  *	    Release when final frame received. | 
 |  *	    Keep status of last N of these for the ELS RES command.  XXX TBD. | 
 |  *	Receive ABTS | 
 |  *	    Deallocate sequence | 
 |  *	Send RJT | 
 |  *	    Deallocate | 
 |  * | 
 |  * For now, we neglect conditions where only part of a sequence was | 
 |  * received or transmitted, or where out-of-order receipt is detected. | 
 |  */ | 
 |  | 
 | /* | 
 |  * Locking notes: | 
 |  * | 
 |  * The EM code run in a per-CPU worker thread. | 
 |  * | 
 |  * To protect against concurrency between a worker thread code and timers, | 
 |  * sequence allocation and deallocation must be locked. | 
 |  *  - exchange refcnt can be done atomicly without locks. | 
 |  *  - sequence allocation must be locked by exch lock. | 
 |  *  - If the em_lock and ex_lock must be taken at the same time, then the | 
 |  *    em_lock must be taken before the ex_lock. | 
 |  */ | 
 |  | 
 | /* | 
 |  * opcode names for debugging. | 
 |  */ | 
 | static char *fc_exch_rctl_names[] = FC_RCTL_NAMES_INIT; | 
 |  | 
 | #define FC_TABLE_SIZE(x)   (sizeof(x) / sizeof(x[0])) | 
 |  | 
 | static inline const char *fc_exch_name_lookup(unsigned int op, char **table, | 
 | 					      unsigned int max_index) | 
 | { | 
 | 	const char *name = NULL; | 
 |  | 
 | 	if (op < max_index) | 
 | 		name = table[op]; | 
 | 	if (!name) | 
 | 		name = "unknown"; | 
 | 	return name; | 
 | } | 
 |  | 
 | static const char *fc_exch_rctl_name(unsigned int op) | 
 | { | 
 | 	return fc_exch_name_lookup(op, fc_exch_rctl_names, | 
 | 				   FC_TABLE_SIZE(fc_exch_rctl_names)); | 
 | } | 
 |  | 
 | /* | 
 |  * Hold an exchange - keep it from being freed. | 
 |  */ | 
 | static void fc_exch_hold(struct fc_exch *ep) | 
 | { | 
 | 	atomic_inc(&ep->ex_refcnt); | 
 | } | 
 |  | 
 | /* | 
 |  * setup fc hdr by initializing few more FC header fields and sof/eof. | 
 |  * Initialized fields by this func: | 
 |  *	- fh_ox_id, fh_rx_id, fh_seq_id, fh_seq_cnt | 
 |  *	- sof and eof | 
 |  */ | 
 | static void fc_exch_setup_hdr(struct fc_exch *ep, struct fc_frame *fp, | 
 | 			      u32 f_ctl) | 
 | { | 
 | 	struct fc_frame_header *fh = fc_frame_header_get(fp); | 
 | 	u16 fill; | 
 |  | 
 | 	fr_sof(fp) = ep->class; | 
 | 	if (ep->seq.cnt) | 
 | 		fr_sof(fp) = fc_sof_normal(ep->class); | 
 |  | 
 | 	if (f_ctl & FC_FC_END_SEQ) { | 
 | 		fr_eof(fp) = FC_EOF_T; | 
 | 		if (fc_sof_needs_ack(ep->class)) | 
 | 			fr_eof(fp) = FC_EOF_N; | 
 | 		/* | 
 | 		 * Form f_ctl. | 
 | 		 * The number of fill bytes to make the length a 4-byte | 
 | 		 * multiple is the low order 2-bits of the f_ctl. | 
 | 		 * The fill itself will have been cleared by the frame | 
 | 		 * allocation. | 
 | 		 * After this, the length will be even, as expected by | 
 | 		 * the transport. | 
 | 		 */ | 
 | 		fill = fr_len(fp) & 3; | 
 | 		if (fill) { | 
 | 			fill = 4 - fill; | 
 | 			/* TODO, this may be a problem with fragmented skb */ | 
 | 			skb_put(fp_skb(fp), fill); | 
 | 			hton24(fh->fh_f_ctl, f_ctl | fill); | 
 | 		} | 
 | 	} else { | 
 | 		WARN_ON(fr_len(fp) % 4 != 0);	/* no pad to non last frame */ | 
 | 		fr_eof(fp) = FC_EOF_N; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * Initialize remainig fh fields | 
 | 	 * from fc_fill_fc_hdr | 
 | 	 */ | 
 | 	fh->fh_ox_id = htons(ep->oxid); | 
 | 	fh->fh_rx_id = htons(ep->rxid); | 
 | 	fh->fh_seq_id = ep->seq.id; | 
 | 	fh->fh_seq_cnt = htons(ep->seq.cnt); | 
 | } | 
 |  | 
 |  | 
 | /* | 
 |  * Release a reference to an exchange. | 
 |  * If the refcnt goes to zero and the exchange is complete, it is freed. | 
 |  */ | 
 | static void fc_exch_release(struct fc_exch *ep) | 
 | { | 
 | 	struct fc_exch_mgr *mp; | 
 |  | 
 | 	if (atomic_dec_and_test(&ep->ex_refcnt)) { | 
 | 		mp = ep->em; | 
 | 		if (ep->destructor) | 
 | 			ep->destructor(&ep->seq, ep->arg); | 
 | 		if (ep->lp->tt.exch_put) | 
 | 			ep->lp->tt.exch_put(ep->lp, mp, ep->xid); | 
 | 		WARN_ON(!ep->esb_stat & ESB_ST_COMPLETE); | 
 | 		mempool_free(ep, mp->ep_pool); | 
 | 	} | 
 | } | 
 |  | 
 | static int fc_exch_done_locked(struct fc_exch *ep) | 
 | { | 
 | 	int rc = 1; | 
 |  | 
 | 	/* | 
 | 	 * We must check for completion in case there are two threads | 
 | 	 * tyring to complete this. But the rrq code will reuse the | 
 | 	 * ep, and in that case we only clear the resp and set it as | 
 | 	 * complete, so it can be reused by the timer to send the rrq. | 
 | 	 */ | 
 | 	ep->resp = NULL; | 
 | 	if (ep->state & FC_EX_DONE) | 
 | 		return rc; | 
 | 	ep->esb_stat |= ESB_ST_COMPLETE; | 
 |  | 
 | 	if (!(ep->esb_stat & ESB_ST_REC_QUAL)) { | 
 | 		ep->state |= FC_EX_DONE; | 
 | 		if (cancel_delayed_work(&ep->timeout_work)) | 
 | 			atomic_dec(&ep->ex_refcnt); /* drop hold for timer */ | 
 | 		rc = 0; | 
 | 	} | 
 | 	return rc; | 
 | } | 
 |  | 
 | static void fc_exch_mgr_delete_ep(struct fc_exch *ep) | 
 | { | 
 | 	struct fc_exch_mgr *mp; | 
 |  | 
 | 	mp = ep->em; | 
 | 	spin_lock_bh(&mp->em_lock); | 
 | 	WARN_ON(mp->total_exches <= 0); | 
 | 	mp->total_exches--; | 
 | 	mp->exches[ep->xid - mp->min_xid] = NULL; | 
 | 	list_del(&ep->ex_list); | 
 | 	spin_unlock_bh(&mp->em_lock); | 
 | 	fc_exch_release(ep);	/* drop hold for exch in mp */ | 
 | } | 
 |  | 
 | /* | 
 |  * Internal version of fc_exch_timer_set - used with lock held. | 
 |  */ | 
 | static inline void fc_exch_timer_set_locked(struct fc_exch *ep, | 
 | 					    unsigned int timer_msec) | 
 | { | 
 | 	if (ep->state & (FC_EX_RST_CLEANUP | FC_EX_DONE)) | 
 | 		return; | 
 |  | 
 | 	FC_DEBUG_EXCH("Exchange (%4x) timed out, notifying the upper layer\n", | 
 | 		      ep->xid); | 
 | 	if (schedule_delayed_work(&ep->timeout_work, | 
 | 				  msecs_to_jiffies(timer_msec))) | 
 | 		fc_exch_hold(ep);		/* hold for timer */ | 
 | } | 
 |  | 
 | /* | 
 |  * Set timer for an exchange. | 
 |  * The time is a minimum delay in milliseconds until the timer fires. | 
 |  * Used for upper level protocols to time out the exchange. | 
 |  * The timer is cancelled when it fires or when the exchange completes. | 
 |  * Returns non-zero if a timer couldn't be allocated. | 
 |  */ | 
 | static void fc_exch_timer_set(struct fc_exch *ep, unsigned int timer_msec) | 
 | { | 
 | 	spin_lock_bh(&ep->ex_lock); | 
 | 	fc_exch_timer_set_locked(ep, timer_msec); | 
 | 	spin_unlock_bh(&ep->ex_lock); | 
 | } | 
 |  | 
 | int fc_seq_exch_abort(const struct fc_seq *req_sp, unsigned int timer_msec) | 
 | { | 
 | 	struct fc_seq *sp; | 
 | 	struct fc_exch *ep; | 
 | 	struct fc_frame *fp; | 
 | 	int error; | 
 |  | 
 | 	ep = fc_seq_exch(req_sp); | 
 |  | 
 | 	spin_lock_bh(&ep->ex_lock); | 
 | 	if (ep->esb_stat & (ESB_ST_COMPLETE | ESB_ST_ABNORMAL) || | 
 | 	    ep->state & (FC_EX_DONE | FC_EX_RST_CLEANUP)) { | 
 | 		spin_unlock_bh(&ep->ex_lock); | 
 | 		return -ENXIO; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * Send the abort on a new sequence if possible. | 
 | 	 */ | 
 | 	sp = fc_seq_start_next_locked(&ep->seq); | 
 | 	if (!sp) { | 
 | 		spin_unlock_bh(&ep->ex_lock); | 
 | 		return -ENOMEM; | 
 | 	} | 
 |  | 
 | 	ep->esb_stat |= ESB_ST_SEQ_INIT | ESB_ST_ABNORMAL; | 
 | 	if (timer_msec) | 
 | 		fc_exch_timer_set_locked(ep, timer_msec); | 
 | 	spin_unlock_bh(&ep->ex_lock); | 
 |  | 
 | 	/* | 
 | 	 * If not logged into the fabric, don't send ABTS but leave | 
 | 	 * sequence active until next timeout. | 
 | 	 */ | 
 | 	if (!ep->sid) | 
 | 		return 0; | 
 |  | 
 | 	/* | 
 | 	 * Send an abort for the sequence that timed out. | 
 | 	 */ | 
 | 	fp = fc_frame_alloc(ep->lp, 0); | 
 | 	if (fp) { | 
 | 		fc_fill_fc_hdr(fp, FC_RCTL_BA_ABTS, ep->did, ep->sid, | 
 | 			       FC_TYPE_BLS, FC_FC_END_SEQ | FC_FC_SEQ_INIT, 0); | 
 | 		error = fc_seq_send(ep->lp, sp, fp); | 
 | 	} else | 
 | 		error = -ENOBUFS; | 
 | 	return error; | 
 | } | 
 | EXPORT_SYMBOL(fc_seq_exch_abort); | 
 |  | 
 | /* | 
 |  * Exchange timeout - handle exchange timer expiration. | 
 |  * The timer will have been cancelled before this is called. | 
 |  */ | 
 | static void fc_exch_timeout(struct work_struct *work) | 
 | { | 
 | 	struct fc_exch *ep = container_of(work, struct fc_exch, | 
 | 					  timeout_work.work); | 
 | 	struct fc_seq *sp = &ep->seq; | 
 | 	void (*resp)(struct fc_seq *, struct fc_frame *fp, void *arg); | 
 | 	void *arg; | 
 | 	u32 e_stat; | 
 | 	int rc = 1; | 
 |  | 
 | 	spin_lock_bh(&ep->ex_lock); | 
 | 	if (ep->state & (FC_EX_RST_CLEANUP | FC_EX_DONE)) | 
 | 		goto unlock; | 
 |  | 
 | 	e_stat = ep->esb_stat; | 
 | 	if (e_stat & ESB_ST_COMPLETE) { | 
 | 		ep->esb_stat = e_stat & ~ESB_ST_REC_QUAL; | 
 | 		if (e_stat & ESB_ST_REC_QUAL) | 
 | 			fc_exch_rrq(ep); | 
 | 		spin_unlock_bh(&ep->ex_lock); | 
 | 		goto done; | 
 | 	} else { | 
 | 		resp = ep->resp; | 
 | 		arg = ep->arg; | 
 | 		ep->resp = NULL; | 
 | 		if (e_stat & ESB_ST_ABNORMAL) | 
 | 			rc = fc_exch_done_locked(ep); | 
 | 		spin_unlock_bh(&ep->ex_lock); | 
 | 		if (!rc) | 
 | 			fc_exch_mgr_delete_ep(ep); | 
 | 		if (resp) | 
 | 			resp(sp, ERR_PTR(-FC_EX_TIMEOUT), arg); | 
 | 		fc_seq_exch_abort(sp, 2 * ep->r_a_tov); | 
 | 		goto done; | 
 | 	} | 
 | unlock: | 
 | 	spin_unlock_bh(&ep->ex_lock); | 
 | done: | 
 | 	/* | 
 | 	 * This release matches the hold taken when the timer was set. | 
 | 	 */ | 
 | 	fc_exch_release(ep); | 
 | } | 
 |  | 
 | /* | 
 |  * Allocate a sequence. | 
 |  * | 
 |  * We don't support multiple originated sequences on the same exchange. | 
 |  * By implication, any previously originated sequence on this exchange | 
 |  * is complete, and we reallocate the same sequence. | 
 |  */ | 
 | static struct fc_seq *fc_seq_alloc(struct fc_exch *ep, u8 seq_id) | 
 | { | 
 | 	struct fc_seq *sp; | 
 |  | 
 | 	sp = &ep->seq; | 
 | 	sp->ssb_stat = 0; | 
 | 	sp->cnt = 0; | 
 | 	sp->id = seq_id; | 
 | 	return sp; | 
 | } | 
 |  | 
 | /* | 
 |  * fc_em_alloc_xid - returns an xid based on request type | 
 |  * @lp : ptr to associated lport | 
 |  * @fp : ptr to the assocated frame | 
 |  * | 
 |  * check the associated fc_fsp_pkt to get scsi command type and | 
 |  * command direction to decide from which range this exch id | 
 |  * will be allocated from. | 
 |  * | 
 |  * Returns : 0 or an valid xid | 
 |  */ | 
 | static u16 fc_em_alloc_xid(struct fc_exch_mgr *mp, const struct fc_frame *fp) | 
 | { | 
 | 	u16 xid, min, max; | 
 | 	u16 *plast; | 
 | 	struct fc_exch *ep = NULL; | 
 |  | 
 | 	if (mp->max_read) { | 
 | 		if (fc_frame_is_read(fp)) { | 
 | 			min = mp->min_xid; | 
 | 			max = mp->max_read; | 
 | 			plast = &mp->last_read; | 
 | 		} else { | 
 | 			min = mp->max_read + 1; | 
 | 			max = mp->max_xid; | 
 | 			plast = &mp->last_xid; | 
 | 		} | 
 | 	} else { | 
 | 		min = mp->min_xid; | 
 | 		max = mp->max_xid; | 
 | 		plast = &mp->last_xid; | 
 | 	} | 
 | 	xid = *plast; | 
 | 	do { | 
 | 		xid = (xid == max) ? min : xid + 1; | 
 | 		ep = mp->exches[xid - mp->min_xid]; | 
 | 	} while ((ep != NULL) && (xid != *plast)); | 
 |  | 
 | 	if (unlikely(ep)) | 
 | 		xid = 0; | 
 | 	else | 
 | 		*plast = xid; | 
 |  | 
 | 	return xid; | 
 | } | 
 |  | 
 | /* | 
 |  * fc_exch_alloc - allocate an exchange. | 
 |  * @mp : ptr to the exchange manager | 
 |  * @xid: input xid | 
 |  * | 
 |  * if xid is supplied zero then assign next free exchange ID | 
 |  * from exchange manager, otherwise use supplied xid. | 
 |  * Returns with exch lock held. | 
 |  */ | 
 | struct fc_exch *fc_exch_alloc(struct fc_exch_mgr *mp, | 
 | 			      struct fc_frame *fp, u16 xid) | 
 | { | 
 | 	struct fc_exch *ep; | 
 |  | 
 | 	/* allocate memory for exchange */ | 
 | 	ep = mempool_alloc(mp->ep_pool, GFP_ATOMIC); | 
 | 	if (!ep) { | 
 | 		atomic_inc(&mp->stats.no_free_exch); | 
 | 		goto out; | 
 | 	} | 
 | 	memset(ep, 0, sizeof(*ep)); | 
 |  | 
 | 	spin_lock_bh(&mp->em_lock); | 
 | 	/* alloc xid if input xid 0 */ | 
 | 	if (!xid) { | 
 | 		/* alloc a new xid */ | 
 | 		xid = fc_em_alloc_xid(mp, fp); | 
 | 		if (!xid) { | 
 | 			printk(KERN_ERR "fc_em_alloc_xid() failed\n"); | 
 | 			goto err; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	fc_exch_hold(ep);	/* hold for exch in mp */ | 
 | 	spin_lock_init(&ep->ex_lock); | 
 | 	/* | 
 | 	 * Hold exch lock for caller to prevent fc_exch_reset() | 
 | 	 * from releasing exch	while fc_exch_alloc() caller is | 
 | 	 * still working on exch. | 
 | 	 */ | 
 | 	spin_lock_bh(&ep->ex_lock); | 
 |  | 
 | 	mp->exches[xid - mp->min_xid] = ep; | 
 | 	list_add_tail(&ep->ex_list, &mp->ex_list); | 
 | 	fc_seq_alloc(ep, ep->seq_id++); | 
 | 	mp->total_exches++; | 
 | 	spin_unlock_bh(&mp->em_lock); | 
 |  | 
 | 	/* | 
 | 	 *  update exchange | 
 | 	 */ | 
 | 	ep->oxid = ep->xid = xid; | 
 | 	ep->em = mp; | 
 | 	ep->lp = mp->lp; | 
 | 	ep->f_ctl = FC_FC_FIRST_SEQ;	/* next seq is first seq */ | 
 | 	ep->rxid = FC_XID_UNKNOWN; | 
 | 	ep->class = mp->class; | 
 | 	INIT_DELAYED_WORK(&ep->timeout_work, fc_exch_timeout); | 
 | out: | 
 | 	return ep; | 
 | err: | 
 | 	spin_unlock_bh(&mp->em_lock); | 
 | 	atomic_inc(&mp->stats.no_free_exch_xid); | 
 | 	mempool_free(ep, mp->ep_pool); | 
 | 	return NULL; | 
 | } | 
 | EXPORT_SYMBOL(fc_exch_alloc); | 
 |  | 
 | /* | 
 |  * Lookup and hold an exchange. | 
 |  */ | 
 | static struct fc_exch *fc_exch_find(struct fc_exch_mgr *mp, u16 xid) | 
 | { | 
 | 	struct fc_exch *ep = NULL; | 
 |  | 
 | 	if ((xid >= mp->min_xid) && (xid <= mp->max_xid)) { | 
 | 		spin_lock_bh(&mp->em_lock); | 
 | 		ep = mp->exches[xid - mp->min_xid]; | 
 | 		if (ep) { | 
 | 			fc_exch_hold(ep); | 
 | 			WARN_ON(ep->xid != xid); | 
 | 		} | 
 | 		spin_unlock_bh(&mp->em_lock); | 
 | 	} | 
 | 	return ep; | 
 | } | 
 |  | 
 | void fc_exch_done(struct fc_seq *sp) | 
 | { | 
 | 	struct fc_exch *ep = fc_seq_exch(sp); | 
 | 	int rc; | 
 |  | 
 | 	spin_lock_bh(&ep->ex_lock); | 
 | 	rc = fc_exch_done_locked(ep); | 
 | 	spin_unlock_bh(&ep->ex_lock); | 
 | 	if (!rc) | 
 | 		fc_exch_mgr_delete_ep(ep); | 
 | } | 
 | EXPORT_SYMBOL(fc_exch_done); | 
 |  | 
 | /* | 
 |  * Allocate a new exchange as responder. | 
 |  * Sets the responder ID in the frame header. | 
 |  */ | 
 | static struct fc_exch *fc_exch_resp(struct fc_exch_mgr *mp, struct fc_frame *fp) | 
 | { | 
 | 	struct fc_exch *ep; | 
 | 	struct fc_frame_header *fh; | 
 | 	u16 rxid; | 
 |  | 
 | 	ep = mp->lp->tt.exch_get(mp->lp, fp); | 
 | 	if (ep) { | 
 | 		ep->class = fc_frame_class(fp); | 
 |  | 
 | 		/* | 
 | 		 * Set EX_CTX indicating we're responding on this exchange. | 
 | 		 */ | 
 | 		ep->f_ctl |= FC_FC_EX_CTX;	/* we're responding */ | 
 | 		ep->f_ctl &= ~FC_FC_FIRST_SEQ;	/* not new */ | 
 | 		fh = fc_frame_header_get(fp); | 
 | 		ep->sid = ntoh24(fh->fh_d_id); | 
 | 		ep->did = ntoh24(fh->fh_s_id); | 
 | 		ep->oid = ep->did; | 
 |  | 
 | 		/* | 
 | 		 * Allocated exchange has placed the XID in the | 
 | 		 * originator field. Move it to the responder field, | 
 | 		 * and set the originator XID from the frame. | 
 | 		 */ | 
 | 		ep->rxid = ep->xid; | 
 | 		ep->oxid = ntohs(fh->fh_ox_id); | 
 | 		ep->esb_stat |= ESB_ST_RESP | ESB_ST_SEQ_INIT; | 
 | 		if ((ntoh24(fh->fh_f_ctl) & FC_FC_SEQ_INIT) == 0) | 
 | 			ep->esb_stat &= ~ESB_ST_SEQ_INIT; | 
 |  | 
 | 		/* | 
 | 		 * Set the responder ID in the frame header. | 
 | 		 * The old one should've been 0xffff. | 
 | 		 * If it isn't, don't assign one. | 
 | 		 * Incoming basic link service frames may specify | 
 | 		 * a referenced RX_ID. | 
 | 		 */ | 
 | 		if (fh->fh_type != FC_TYPE_BLS) { | 
 | 			rxid = ntohs(fh->fh_rx_id); | 
 | 			WARN_ON(rxid != FC_XID_UNKNOWN); | 
 | 			fh->fh_rx_id = htons(ep->rxid); | 
 | 		} | 
 | 		fc_exch_hold(ep);	/* hold for caller */ | 
 | 		spin_unlock_bh(&ep->ex_lock);	/* lock from exch_get */ | 
 | 	} | 
 | 	return ep; | 
 | } | 
 |  | 
 | /* | 
 |  * Find a sequence for receive where the other end is originating the sequence. | 
 |  * If fc_pf_rjt_reason is FC_RJT_NONE then this function will have a hold | 
 |  * on the ep that should be released by the caller. | 
 |  */ | 
 | static enum fc_pf_rjt_reason | 
 | fc_seq_lookup_recip(struct fc_exch_mgr *mp, struct fc_frame *fp) | 
 | { | 
 | 	struct fc_frame_header *fh = fc_frame_header_get(fp); | 
 | 	struct fc_exch *ep = NULL; | 
 | 	struct fc_seq *sp = NULL; | 
 | 	enum fc_pf_rjt_reason reject = FC_RJT_NONE; | 
 | 	u32 f_ctl; | 
 | 	u16 xid; | 
 |  | 
 | 	f_ctl = ntoh24(fh->fh_f_ctl); | 
 | 	WARN_ON((f_ctl & FC_FC_SEQ_CTX) != 0); | 
 |  | 
 | 	/* | 
 | 	 * Lookup or create the exchange if we will be creating the sequence. | 
 | 	 */ | 
 | 	if (f_ctl & FC_FC_EX_CTX) { | 
 | 		xid = ntohs(fh->fh_ox_id);	/* we originated exch */ | 
 | 		ep = fc_exch_find(mp, xid); | 
 | 		if (!ep) { | 
 | 			atomic_inc(&mp->stats.xid_not_found); | 
 | 			reject = FC_RJT_OX_ID; | 
 | 			goto out; | 
 | 		} | 
 | 		if (ep->rxid == FC_XID_UNKNOWN) | 
 | 			ep->rxid = ntohs(fh->fh_rx_id); | 
 | 		else if (ep->rxid != ntohs(fh->fh_rx_id)) { | 
 | 			reject = FC_RJT_OX_ID; | 
 | 			goto rel; | 
 | 		} | 
 | 	} else { | 
 | 		xid = ntohs(fh->fh_rx_id);	/* we are the responder */ | 
 |  | 
 | 		/* | 
 | 		 * Special case for MDS issuing an ELS TEST with a | 
 | 		 * bad rxid of 0. | 
 | 		 * XXX take this out once we do the proper reject. | 
 | 		 */ | 
 | 		if (xid == 0 && fh->fh_r_ctl == FC_RCTL_ELS_REQ && | 
 | 		    fc_frame_payload_op(fp) == ELS_TEST) { | 
 | 			fh->fh_rx_id = htons(FC_XID_UNKNOWN); | 
 | 			xid = FC_XID_UNKNOWN; | 
 | 		} | 
 |  | 
 | 		/* | 
 | 		 * new sequence - find the exchange | 
 | 		 */ | 
 | 		ep = fc_exch_find(mp, xid); | 
 | 		if ((f_ctl & FC_FC_FIRST_SEQ) && fc_sof_is_init(fr_sof(fp))) { | 
 | 			if (ep) { | 
 | 				atomic_inc(&mp->stats.xid_busy); | 
 | 				reject = FC_RJT_RX_ID; | 
 | 				goto rel; | 
 | 			} | 
 | 			ep = fc_exch_resp(mp, fp); | 
 | 			if (!ep) { | 
 | 				reject = FC_RJT_EXCH_EST;	/* XXX */ | 
 | 				goto out; | 
 | 			} | 
 | 			xid = ep->xid;	/* get our XID */ | 
 | 		} else if (!ep) { | 
 | 			atomic_inc(&mp->stats.xid_not_found); | 
 | 			reject = FC_RJT_RX_ID;	/* XID not found */ | 
 | 			goto out; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * At this point, we have the exchange held. | 
 | 	 * Find or create the sequence. | 
 | 	 */ | 
 | 	if (fc_sof_is_init(fr_sof(fp))) { | 
 | 		sp = fc_seq_start_next(&ep->seq); | 
 | 		if (!sp) { | 
 | 			reject = FC_RJT_SEQ_XS;	/* exchange shortage */ | 
 | 			goto rel; | 
 | 		} | 
 | 		sp->id = fh->fh_seq_id; | 
 | 		sp->ssb_stat |= SSB_ST_RESP; | 
 | 	} else { | 
 | 		sp = &ep->seq; | 
 | 		if (sp->id != fh->fh_seq_id) { | 
 | 			atomic_inc(&mp->stats.seq_not_found); | 
 | 			reject = FC_RJT_SEQ_ID;	/* sequence/exch should exist */ | 
 | 			goto rel; | 
 | 		} | 
 | 	} | 
 | 	WARN_ON(ep != fc_seq_exch(sp)); | 
 |  | 
 | 	if (f_ctl & FC_FC_SEQ_INIT) | 
 | 		ep->esb_stat |= ESB_ST_SEQ_INIT; | 
 |  | 
 | 	fr_seq(fp) = sp; | 
 | out: | 
 | 	return reject; | 
 | rel: | 
 | 	fc_exch_done(&ep->seq); | 
 | 	fc_exch_release(ep);	/* hold from fc_exch_find/fc_exch_resp */ | 
 | 	return reject; | 
 | } | 
 |  | 
 | /* | 
 |  * Find the sequence for a frame being received. | 
 |  * We originated the sequence, so it should be found. | 
 |  * We may or may not have originated the exchange. | 
 |  * Does not hold the sequence for the caller. | 
 |  */ | 
 | static struct fc_seq *fc_seq_lookup_orig(struct fc_exch_mgr *mp, | 
 | 					 struct fc_frame *fp) | 
 | { | 
 | 	struct fc_frame_header *fh = fc_frame_header_get(fp); | 
 | 	struct fc_exch *ep; | 
 | 	struct fc_seq *sp = NULL; | 
 | 	u32 f_ctl; | 
 | 	u16 xid; | 
 |  | 
 | 	f_ctl = ntoh24(fh->fh_f_ctl); | 
 | 	WARN_ON((f_ctl & FC_FC_SEQ_CTX) != FC_FC_SEQ_CTX); | 
 | 	xid = ntohs((f_ctl & FC_FC_EX_CTX) ? fh->fh_ox_id : fh->fh_rx_id); | 
 | 	ep = fc_exch_find(mp, xid); | 
 | 	if (!ep) | 
 | 		return NULL; | 
 | 	if (ep->seq.id == fh->fh_seq_id) { | 
 | 		/* | 
 | 		 * Save the RX_ID if we didn't previously know it. | 
 | 		 */ | 
 | 		sp = &ep->seq; | 
 | 		if ((f_ctl & FC_FC_EX_CTX) != 0 && | 
 | 		    ep->rxid == FC_XID_UNKNOWN) { | 
 | 			ep->rxid = ntohs(fh->fh_rx_id); | 
 | 		} | 
 | 	} | 
 | 	fc_exch_release(ep); | 
 | 	return sp; | 
 | } | 
 |  | 
 | /* | 
 |  * Set addresses for an exchange. | 
 |  * Note this must be done before the first sequence of the exchange is sent. | 
 |  */ | 
 | static void fc_exch_set_addr(struct fc_exch *ep, | 
 | 			     u32 orig_id, u32 resp_id) | 
 | { | 
 | 	ep->oid = orig_id; | 
 | 	if (ep->esb_stat & ESB_ST_RESP) { | 
 | 		ep->sid = resp_id; | 
 | 		ep->did = orig_id; | 
 | 	} else { | 
 | 		ep->sid = orig_id; | 
 | 		ep->did = resp_id; | 
 | 	} | 
 | } | 
 |  | 
 | static struct fc_seq *fc_seq_start_next_locked(struct fc_seq *sp) | 
 | { | 
 | 	struct fc_exch *ep = fc_seq_exch(sp); | 
 |  | 
 | 	sp = fc_seq_alloc(ep, ep->seq_id++); | 
 | 	FC_DEBUG_EXCH("exch %4x f_ctl %6x seq %2x\n", | 
 | 		      ep->xid, ep->f_ctl, sp->id); | 
 | 	return sp; | 
 | } | 
 | /* | 
 |  * Allocate a new sequence on the same exchange as the supplied sequence. | 
 |  * This will never return NULL. | 
 |  */ | 
 | struct fc_seq *fc_seq_start_next(struct fc_seq *sp) | 
 | { | 
 | 	struct fc_exch *ep = fc_seq_exch(sp); | 
 |  | 
 | 	spin_lock_bh(&ep->ex_lock); | 
 | 	WARN_ON((ep->esb_stat & ESB_ST_COMPLETE) != 0); | 
 | 	sp = fc_seq_start_next_locked(sp); | 
 | 	spin_unlock_bh(&ep->ex_lock); | 
 |  | 
 | 	return sp; | 
 | } | 
 | EXPORT_SYMBOL(fc_seq_start_next); | 
 |  | 
 | int fc_seq_send(struct fc_lport *lp, struct fc_seq *sp, struct fc_frame *fp) | 
 | { | 
 | 	struct fc_exch *ep; | 
 | 	struct fc_frame_header *fh = fc_frame_header_get(fp); | 
 | 	int error; | 
 | 	u32	f_ctl; | 
 |  | 
 | 	ep = fc_seq_exch(sp); | 
 | 	WARN_ON((ep->esb_stat & ESB_ST_SEQ_INIT) != ESB_ST_SEQ_INIT); | 
 |  | 
 | 	f_ctl = ntoh24(fh->fh_f_ctl); | 
 | 	fc_exch_setup_hdr(ep, fp, f_ctl); | 
 |  | 
 | 	/* | 
 | 	 * update sequence count if this frame is carrying | 
 | 	 * multiple FC frames when sequence offload is enabled | 
 | 	 * by LLD. | 
 | 	 */ | 
 | 	if (fr_max_payload(fp)) | 
 | 		sp->cnt += DIV_ROUND_UP((fr_len(fp) - sizeof(*fh)), | 
 | 					fr_max_payload(fp)); | 
 | 	else | 
 | 		sp->cnt++; | 
 |  | 
 | 	/* | 
 | 	 * Send the frame. | 
 | 	 */ | 
 | 	error = lp->tt.frame_send(lp, fp); | 
 |  | 
 | 	/* | 
 | 	 * Update the exchange and sequence flags, | 
 | 	 * assuming all frames for the sequence have been sent. | 
 | 	 * We can only be called to send once for each sequence. | 
 | 	 */ | 
 | 	spin_lock_bh(&ep->ex_lock); | 
 | 	ep->f_ctl = f_ctl & ~FC_FC_FIRST_SEQ;	/* not first seq */ | 
 | 	if (f_ctl & (FC_FC_END_SEQ | FC_FC_SEQ_INIT)) | 
 | 		ep->esb_stat &= ~ESB_ST_SEQ_INIT; | 
 | 	spin_unlock_bh(&ep->ex_lock); | 
 | 	return error; | 
 | } | 
 | EXPORT_SYMBOL(fc_seq_send); | 
 |  | 
 | void fc_seq_els_rsp_send(struct fc_seq *sp, enum fc_els_cmd els_cmd, | 
 | 			 struct fc_seq_els_data *els_data) | 
 | { | 
 | 	switch (els_cmd) { | 
 | 	case ELS_LS_RJT: | 
 | 		fc_seq_ls_rjt(sp, els_data->reason, els_data->explan); | 
 | 		break; | 
 | 	case ELS_LS_ACC: | 
 | 		fc_seq_ls_acc(sp); | 
 | 		break; | 
 | 	case ELS_RRQ: | 
 | 		fc_exch_els_rrq(sp, els_data->fp); | 
 | 		break; | 
 | 	case ELS_REC: | 
 | 		fc_exch_els_rec(sp, els_data->fp); | 
 | 		break; | 
 | 	default: | 
 | 		FC_DBG("Invalid ELS CMD:%x\n", els_cmd); | 
 | 	} | 
 | } | 
 | EXPORT_SYMBOL(fc_seq_els_rsp_send); | 
 |  | 
 | /* | 
 |  * Send a sequence, which is also the last sequence in the exchange. | 
 |  */ | 
 | static void fc_seq_send_last(struct fc_seq *sp, struct fc_frame *fp, | 
 | 			     enum fc_rctl rctl, enum fc_fh_type fh_type) | 
 | { | 
 | 	u32 f_ctl; | 
 | 	struct fc_exch *ep = fc_seq_exch(sp); | 
 |  | 
 | 	f_ctl = FC_FC_LAST_SEQ | FC_FC_END_SEQ | FC_FC_SEQ_INIT; | 
 | 	f_ctl |= ep->f_ctl; | 
 | 	fc_fill_fc_hdr(fp, rctl, ep->did, ep->sid, fh_type, f_ctl, 0); | 
 | 	fc_seq_send(ep->lp, sp, fp); | 
 | } | 
 |  | 
 | /* | 
 |  * Send ACK_1 (or equiv.) indicating we received something. | 
 |  * The frame we're acking is supplied. | 
 |  */ | 
 | static void fc_seq_send_ack(struct fc_seq *sp, const struct fc_frame *rx_fp) | 
 | { | 
 | 	struct fc_frame *fp; | 
 | 	struct fc_frame_header *rx_fh; | 
 | 	struct fc_frame_header *fh; | 
 | 	struct fc_exch *ep = fc_seq_exch(sp); | 
 | 	struct fc_lport *lp = ep->lp; | 
 | 	unsigned int f_ctl; | 
 |  | 
 | 	/* | 
 | 	 * Don't send ACKs for class 3. | 
 | 	 */ | 
 | 	if (fc_sof_needs_ack(fr_sof(rx_fp))) { | 
 | 		fp = fc_frame_alloc(lp, 0); | 
 | 		if (!fp) | 
 | 			return; | 
 |  | 
 | 		fh = fc_frame_header_get(fp); | 
 | 		fh->fh_r_ctl = FC_RCTL_ACK_1; | 
 | 		fh->fh_type = FC_TYPE_BLS; | 
 |  | 
 | 		/* | 
 | 		 * Form f_ctl by inverting EX_CTX and SEQ_CTX (bits 23, 22). | 
 | 		 * Echo FIRST_SEQ, LAST_SEQ, END_SEQ, END_CONN, SEQ_INIT. | 
 | 		 * Bits 9-8 are meaningful (retransmitted or unidirectional). | 
 | 		 * Last ACK uses bits 7-6 (continue sequence), | 
 | 		 * bits 5-4 are meaningful (what kind of ACK to use). | 
 | 		 */ | 
 | 		rx_fh = fc_frame_header_get(rx_fp); | 
 | 		f_ctl = ntoh24(rx_fh->fh_f_ctl); | 
 | 		f_ctl &= FC_FC_EX_CTX | FC_FC_SEQ_CTX | | 
 | 			FC_FC_FIRST_SEQ | FC_FC_LAST_SEQ | | 
 | 			FC_FC_END_SEQ | FC_FC_END_CONN | FC_FC_SEQ_INIT | | 
 | 			FC_FC_RETX_SEQ | FC_FC_UNI_TX; | 
 | 		f_ctl ^= FC_FC_EX_CTX | FC_FC_SEQ_CTX; | 
 | 		hton24(fh->fh_f_ctl, f_ctl); | 
 |  | 
 | 		fc_exch_setup_hdr(ep, fp, f_ctl); | 
 | 		fh->fh_seq_id = rx_fh->fh_seq_id; | 
 | 		fh->fh_seq_cnt = rx_fh->fh_seq_cnt; | 
 | 		fh->fh_parm_offset = htonl(1);	/* ack single frame */ | 
 |  | 
 | 		fr_sof(fp) = fr_sof(rx_fp); | 
 | 		if (f_ctl & FC_FC_END_SEQ) | 
 | 			fr_eof(fp) = FC_EOF_T; | 
 | 		else | 
 | 			fr_eof(fp) = FC_EOF_N; | 
 |  | 
 | 		(void) lp->tt.frame_send(lp, fp); | 
 | 	} | 
 | } | 
 |  | 
 | /* | 
 |  * Send BLS Reject. | 
 |  * This is for rejecting BA_ABTS only. | 
 |  */ | 
 | static void | 
 | fc_exch_send_ba_rjt(struct fc_frame *rx_fp, enum fc_ba_rjt_reason reason, | 
 | 		    enum fc_ba_rjt_explan explan) | 
 | { | 
 | 	struct fc_frame *fp; | 
 | 	struct fc_frame_header *rx_fh; | 
 | 	struct fc_frame_header *fh; | 
 | 	struct fc_ba_rjt *rp; | 
 | 	struct fc_lport *lp; | 
 | 	unsigned int f_ctl; | 
 |  | 
 | 	lp = fr_dev(rx_fp); | 
 | 	fp = fc_frame_alloc(lp, sizeof(*rp)); | 
 | 	if (!fp) | 
 | 		return; | 
 | 	fh = fc_frame_header_get(fp); | 
 | 	rx_fh = fc_frame_header_get(rx_fp); | 
 |  | 
 | 	memset(fh, 0, sizeof(*fh) + sizeof(*rp)); | 
 |  | 
 | 	rp = fc_frame_payload_get(fp, sizeof(*rp)); | 
 | 	rp->br_reason = reason; | 
 | 	rp->br_explan = explan; | 
 |  | 
 | 	/* | 
 | 	 * seq_id, cs_ctl, df_ctl and param/offset are zero. | 
 | 	 */ | 
 | 	memcpy(fh->fh_s_id, rx_fh->fh_d_id, 3); | 
 | 	memcpy(fh->fh_d_id, rx_fh->fh_s_id, 3); | 
 | 	fh->fh_ox_id = rx_fh->fh_rx_id; | 
 | 	fh->fh_rx_id = rx_fh->fh_ox_id; | 
 | 	fh->fh_seq_cnt = rx_fh->fh_seq_cnt; | 
 | 	fh->fh_r_ctl = FC_RCTL_BA_RJT; | 
 | 	fh->fh_type = FC_TYPE_BLS; | 
 |  | 
 | 	/* | 
 | 	 * Form f_ctl by inverting EX_CTX and SEQ_CTX (bits 23, 22). | 
 | 	 * Echo FIRST_SEQ, LAST_SEQ, END_SEQ, END_CONN, SEQ_INIT. | 
 | 	 * Bits 9-8 are meaningful (retransmitted or unidirectional). | 
 | 	 * Last ACK uses bits 7-6 (continue sequence), | 
 | 	 * bits 5-4 are meaningful (what kind of ACK to use). | 
 | 	 * Always set LAST_SEQ, END_SEQ. | 
 | 	 */ | 
 | 	f_ctl = ntoh24(rx_fh->fh_f_ctl); | 
 | 	f_ctl &= FC_FC_EX_CTX | FC_FC_SEQ_CTX | | 
 | 		FC_FC_END_CONN | FC_FC_SEQ_INIT | | 
 | 		FC_FC_RETX_SEQ | FC_FC_UNI_TX; | 
 | 	f_ctl ^= FC_FC_EX_CTX | FC_FC_SEQ_CTX; | 
 | 	f_ctl |= FC_FC_LAST_SEQ | FC_FC_END_SEQ; | 
 | 	f_ctl &= ~FC_FC_FIRST_SEQ; | 
 | 	hton24(fh->fh_f_ctl, f_ctl); | 
 |  | 
 | 	fr_sof(fp) = fc_sof_class(fr_sof(rx_fp)); | 
 | 	fr_eof(fp) = FC_EOF_T; | 
 | 	if (fc_sof_needs_ack(fr_sof(fp))) | 
 | 		fr_eof(fp) = FC_EOF_N; | 
 |  | 
 | 	(void) lp->tt.frame_send(lp, fp); | 
 | } | 
 |  | 
 | /* | 
 |  * Handle an incoming ABTS.  This would be for target mode usually, | 
 |  * but could be due to lost FCP transfer ready, confirm or RRQ. | 
 |  * We always handle this as an exchange abort, ignoring the parameter. | 
 |  */ | 
 | static void fc_exch_recv_abts(struct fc_exch *ep, struct fc_frame *rx_fp) | 
 | { | 
 | 	struct fc_frame *fp; | 
 | 	struct fc_ba_acc *ap; | 
 | 	struct fc_frame_header *fh; | 
 | 	struct fc_seq *sp; | 
 |  | 
 | 	if (!ep) | 
 | 		goto reject; | 
 | 	spin_lock_bh(&ep->ex_lock); | 
 | 	if (ep->esb_stat & ESB_ST_COMPLETE) { | 
 | 		spin_unlock_bh(&ep->ex_lock); | 
 | 		goto reject; | 
 | 	} | 
 | 	if (!(ep->esb_stat & ESB_ST_REC_QUAL)) | 
 | 		fc_exch_hold(ep);		/* hold for REC_QUAL */ | 
 | 	ep->esb_stat |= ESB_ST_ABNORMAL | ESB_ST_REC_QUAL; | 
 | 	fc_exch_timer_set_locked(ep, ep->r_a_tov); | 
 |  | 
 | 	fp = fc_frame_alloc(ep->lp, sizeof(*ap)); | 
 | 	if (!fp) { | 
 | 		spin_unlock_bh(&ep->ex_lock); | 
 | 		goto free; | 
 | 	} | 
 | 	fh = fc_frame_header_get(fp); | 
 | 	ap = fc_frame_payload_get(fp, sizeof(*ap)); | 
 | 	memset(ap, 0, sizeof(*ap)); | 
 | 	sp = &ep->seq; | 
 | 	ap->ba_high_seq_cnt = htons(0xffff); | 
 | 	if (sp->ssb_stat & SSB_ST_RESP) { | 
 | 		ap->ba_seq_id = sp->id; | 
 | 		ap->ba_seq_id_val = FC_BA_SEQ_ID_VAL; | 
 | 		ap->ba_high_seq_cnt = fh->fh_seq_cnt; | 
 | 		ap->ba_low_seq_cnt = htons(sp->cnt); | 
 | 	} | 
 | 	sp = fc_seq_start_next(sp); | 
 | 	spin_unlock_bh(&ep->ex_lock); | 
 | 	fc_seq_send_last(sp, fp, FC_RCTL_BA_ACC, FC_TYPE_BLS); | 
 | 	fc_frame_free(rx_fp); | 
 | 	return; | 
 |  | 
 | reject: | 
 | 	fc_exch_send_ba_rjt(rx_fp, FC_BA_RJT_UNABLE, FC_BA_RJT_INV_XID); | 
 | free: | 
 | 	fc_frame_free(rx_fp); | 
 | } | 
 |  | 
 | /* | 
 |  * Handle receive where the other end is originating the sequence. | 
 |  */ | 
 | static void fc_exch_recv_req(struct fc_lport *lp, struct fc_exch_mgr *mp, | 
 | 			     struct fc_frame *fp) | 
 | { | 
 | 	struct fc_frame_header *fh = fc_frame_header_get(fp); | 
 | 	struct fc_seq *sp = NULL; | 
 | 	struct fc_exch *ep = NULL; | 
 | 	enum fc_sof sof; | 
 | 	enum fc_eof eof; | 
 | 	u32 f_ctl; | 
 | 	enum fc_pf_rjt_reason reject; | 
 |  | 
 | 	fr_seq(fp) = NULL; | 
 | 	reject = fc_seq_lookup_recip(mp, fp); | 
 | 	if (reject == FC_RJT_NONE) { | 
 | 		sp = fr_seq(fp);	/* sequence will be held */ | 
 | 		ep = fc_seq_exch(sp); | 
 | 		sof = fr_sof(fp); | 
 | 		eof = fr_eof(fp); | 
 | 		f_ctl = ntoh24(fh->fh_f_ctl); | 
 | 		fc_seq_send_ack(sp, fp); | 
 |  | 
 | 		/* | 
 | 		 * Call the receive function. | 
 | 		 * | 
 | 		 * The receive function may allocate a new sequence | 
 | 		 * over the old one, so we shouldn't change the | 
 | 		 * sequence after this. | 
 | 		 * | 
 | 		 * The frame will be freed by the receive function. | 
 | 		 * If new exch resp handler is valid then call that | 
 | 		 * first. | 
 | 		 */ | 
 | 		if (ep->resp) | 
 | 			ep->resp(sp, fp, ep->arg); | 
 | 		else | 
 | 			lp->tt.lport_recv(lp, sp, fp); | 
 | 		fc_exch_release(ep);	/* release from lookup */ | 
 | 	} else { | 
 | 		FC_DEBUG_EXCH("exch/seq lookup failed: reject %x\n", reject); | 
 | 		fc_frame_free(fp); | 
 | 	} | 
 | } | 
 |  | 
 | /* | 
 |  * Handle receive where the other end is originating the sequence in | 
 |  * response to our exchange. | 
 |  */ | 
 | static void fc_exch_recv_seq_resp(struct fc_exch_mgr *mp, struct fc_frame *fp) | 
 | { | 
 | 	struct fc_frame_header *fh = fc_frame_header_get(fp); | 
 | 	struct fc_seq *sp; | 
 | 	struct fc_exch *ep; | 
 | 	enum fc_sof sof; | 
 | 	u32 f_ctl; | 
 | 	void (*resp)(struct fc_seq *, struct fc_frame *fp, void *arg); | 
 | 	void *ex_resp_arg; | 
 | 	int rc; | 
 |  | 
 | 	ep = fc_exch_find(mp, ntohs(fh->fh_ox_id)); | 
 | 	if (!ep) { | 
 | 		atomic_inc(&mp->stats.xid_not_found); | 
 | 		goto out; | 
 | 	} | 
 | 	if (ep->rxid == FC_XID_UNKNOWN) | 
 | 		ep->rxid = ntohs(fh->fh_rx_id); | 
 | 	if (ep->sid != 0 && ep->sid != ntoh24(fh->fh_d_id)) { | 
 | 		atomic_inc(&mp->stats.xid_not_found); | 
 | 		goto rel; | 
 | 	} | 
 | 	if (ep->did != ntoh24(fh->fh_s_id) && | 
 | 	    ep->did != FC_FID_FLOGI) { | 
 | 		atomic_inc(&mp->stats.xid_not_found); | 
 | 		goto rel; | 
 | 	} | 
 | 	sof = fr_sof(fp); | 
 | 	if (fc_sof_is_init(sof)) { | 
 | 		sp = fc_seq_start_next(&ep->seq); | 
 | 		sp->id = fh->fh_seq_id; | 
 | 		sp->ssb_stat |= SSB_ST_RESP; | 
 | 	} else { | 
 | 		sp = &ep->seq; | 
 | 		if (sp->id != fh->fh_seq_id) { | 
 | 			atomic_inc(&mp->stats.seq_not_found); | 
 | 			goto rel; | 
 | 		} | 
 | 	} | 
 | 	f_ctl = ntoh24(fh->fh_f_ctl); | 
 | 	fr_seq(fp) = sp; | 
 | 	if (f_ctl & FC_FC_SEQ_INIT) | 
 | 		ep->esb_stat |= ESB_ST_SEQ_INIT; | 
 |  | 
 | 	if (fc_sof_needs_ack(sof)) | 
 | 		fc_seq_send_ack(sp, fp); | 
 | 	resp = ep->resp; | 
 | 	ex_resp_arg = ep->arg; | 
 |  | 
 | 	if (fh->fh_type != FC_TYPE_FCP && fr_eof(fp) == FC_EOF_T && | 
 | 	    (f_ctl & (FC_FC_LAST_SEQ | FC_FC_END_SEQ)) == | 
 | 	    (FC_FC_LAST_SEQ | FC_FC_END_SEQ)) { | 
 | 		spin_lock_bh(&ep->ex_lock); | 
 | 		rc = fc_exch_done_locked(ep); | 
 | 		WARN_ON(fc_seq_exch(sp) != ep); | 
 | 		spin_unlock_bh(&ep->ex_lock); | 
 | 		if (!rc) | 
 | 			fc_exch_mgr_delete_ep(ep); | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * Call the receive function. | 
 | 	 * The sequence is held (has a refcnt) for us, | 
 | 	 * but not for the receive function. | 
 | 	 * | 
 | 	 * The receive function may allocate a new sequence | 
 | 	 * over the old one, so we shouldn't change the | 
 | 	 * sequence after this. | 
 | 	 * | 
 | 	 * The frame will be freed by the receive function. | 
 | 	 * If new exch resp handler is valid then call that | 
 | 	 * first. | 
 | 	 */ | 
 | 	if (resp) | 
 | 		resp(sp, fp, ex_resp_arg); | 
 | 	else | 
 | 		fc_frame_free(fp); | 
 | 	fc_exch_release(ep); | 
 | 	return; | 
 | rel: | 
 | 	fc_exch_release(ep); | 
 | out: | 
 | 	fc_frame_free(fp); | 
 | } | 
 |  | 
 | /* | 
 |  * Handle receive for a sequence where other end is responding to our sequence. | 
 |  */ | 
 | static void fc_exch_recv_resp(struct fc_exch_mgr *mp, struct fc_frame *fp) | 
 | { | 
 | 	struct fc_seq *sp; | 
 |  | 
 | 	sp = fc_seq_lookup_orig(mp, fp);	/* doesn't hold sequence */ | 
 | 	if (!sp) { | 
 | 		atomic_inc(&mp->stats.xid_not_found); | 
 | 		FC_DEBUG_EXCH("seq lookup failed\n"); | 
 | 	} else { | 
 | 		atomic_inc(&mp->stats.non_bls_resp); | 
 | 		FC_DEBUG_EXCH("non-BLS response to sequence"); | 
 | 	} | 
 | 	fc_frame_free(fp); | 
 | } | 
 |  | 
 | /* | 
 |  * Handle the response to an ABTS for exchange or sequence. | 
 |  * This can be BA_ACC or BA_RJT. | 
 |  */ | 
 | static void fc_exch_abts_resp(struct fc_exch *ep, struct fc_frame *fp) | 
 | { | 
 | 	void (*resp)(struct fc_seq *, struct fc_frame *fp, void *arg); | 
 | 	void *ex_resp_arg; | 
 | 	struct fc_frame_header *fh; | 
 | 	struct fc_ba_acc *ap; | 
 | 	struct fc_seq *sp; | 
 | 	u16 low; | 
 | 	u16 high; | 
 | 	int rc = 1, has_rec = 0; | 
 |  | 
 | 	fh = fc_frame_header_get(fp); | 
 | 	FC_DEBUG_EXCH("exch: BLS rctl %x - %s\n", | 
 | 		      fh->fh_r_ctl, fc_exch_rctl_name(fh->fh_r_ctl)); | 
 |  | 
 | 	if (cancel_delayed_work_sync(&ep->timeout_work)) | 
 | 		fc_exch_release(ep);	/* release from pending timer hold */ | 
 |  | 
 | 	spin_lock_bh(&ep->ex_lock); | 
 | 	switch (fh->fh_r_ctl) { | 
 | 	case FC_RCTL_BA_ACC: | 
 | 		ap = fc_frame_payload_get(fp, sizeof(*ap)); | 
 | 		if (!ap) | 
 | 			break; | 
 |  | 
 | 		/* | 
 | 		 * Decide whether to establish a Recovery Qualifier. | 
 | 		 * We do this if there is a non-empty SEQ_CNT range and | 
 | 		 * SEQ_ID is the same as the one we aborted. | 
 | 		 */ | 
 | 		low = ntohs(ap->ba_low_seq_cnt); | 
 | 		high = ntohs(ap->ba_high_seq_cnt); | 
 | 		if ((ep->esb_stat & ESB_ST_REC_QUAL) == 0 && | 
 | 		    (ap->ba_seq_id_val != FC_BA_SEQ_ID_VAL || | 
 | 		     ap->ba_seq_id == ep->seq_id) && low != high) { | 
 | 			ep->esb_stat |= ESB_ST_REC_QUAL; | 
 | 			fc_exch_hold(ep);  /* hold for recovery qualifier */ | 
 | 			has_rec = 1; | 
 | 		} | 
 | 		break; | 
 | 	case FC_RCTL_BA_RJT: | 
 | 		break; | 
 | 	default: | 
 | 		break; | 
 | 	} | 
 |  | 
 | 	resp = ep->resp; | 
 | 	ex_resp_arg = ep->arg; | 
 |  | 
 | 	/* do we need to do some other checks here. Can we reuse more of | 
 | 	 * fc_exch_recv_seq_resp | 
 | 	 */ | 
 | 	sp = &ep->seq; | 
 | 	/* | 
 | 	 * do we want to check END_SEQ as well as LAST_SEQ here? | 
 | 	 */ | 
 | 	if (ep->fh_type != FC_TYPE_FCP && | 
 | 	    ntoh24(fh->fh_f_ctl) & FC_FC_LAST_SEQ) | 
 | 		rc = fc_exch_done_locked(ep); | 
 | 	spin_unlock_bh(&ep->ex_lock); | 
 | 	if (!rc) | 
 | 		fc_exch_mgr_delete_ep(ep); | 
 |  | 
 | 	if (resp) | 
 | 		resp(sp, fp, ex_resp_arg); | 
 | 	else | 
 | 		fc_frame_free(fp); | 
 |  | 
 | 	if (has_rec) | 
 | 		fc_exch_timer_set(ep, ep->r_a_tov); | 
 |  | 
 | } | 
 |  | 
 | /* | 
 |  * Receive BLS sequence. | 
 |  * This is always a sequence initiated by the remote side. | 
 |  * We may be either the originator or recipient of the exchange. | 
 |  */ | 
 | static void fc_exch_recv_bls(struct fc_exch_mgr *mp, struct fc_frame *fp) | 
 | { | 
 | 	struct fc_frame_header *fh; | 
 | 	struct fc_exch *ep; | 
 | 	u32 f_ctl; | 
 |  | 
 | 	fh = fc_frame_header_get(fp); | 
 | 	f_ctl = ntoh24(fh->fh_f_ctl); | 
 | 	fr_seq(fp) = NULL; | 
 |  | 
 | 	ep = fc_exch_find(mp, (f_ctl & FC_FC_EX_CTX) ? | 
 | 			  ntohs(fh->fh_ox_id) : ntohs(fh->fh_rx_id)); | 
 | 	if (ep && (f_ctl & FC_FC_SEQ_INIT)) { | 
 | 		spin_lock_bh(&ep->ex_lock); | 
 | 		ep->esb_stat |= ESB_ST_SEQ_INIT; | 
 | 		spin_unlock_bh(&ep->ex_lock); | 
 | 	} | 
 | 	if (f_ctl & FC_FC_SEQ_CTX) { | 
 | 		/* | 
 | 		 * A response to a sequence we initiated. | 
 | 		 * This should only be ACKs for class 2 or F. | 
 | 		 */ | 
 | 		switch (fh->fh_r_ctl) { | 
 | 		case FC_RCTL_ACK_1: | 
 | 		case FC_RCTL_ACK_0: | 
 | 			break; | 
 | 		default: | 
 | 			FC_DEBUG_EXCH("BLS rctl %x - %s received", | 
 | 				      fh->fh_r_ctl, | 
 | 				      fc_exch_rctl_name(fh->fh_r_ctl)); | 
 | 			break; | 
 | 		} | 
 | 		fc_frame_free(fp); | 
 | 	} else { | 
 | 		switch (fh->fh_r_ctl) { | 
 | 		case FC_RCTL_BA_RJT: | 
 | 		case FC_RCTL_BA_ACC: | 
 | 			if (ep) | 
 | 				fc_exch_abts_resp(ep, fp); | 
 | 			else | 
 | 				fc_frame_free(fp); | 
 | 			break; | 
 | 		case FC_RCTL_BA_ABTS: | 
 | 			fc_exch_recv_abts(ep, fp); | 
 | 			break; | 
 | 		default:			/* ignore junk */ | 
 | 			fc_frame_free(fp); | 
 | 			break; | 
 | 		} | 
 | 	} | 
 | 	if (ep) | 
 | 		fc_exch_release(ep);	/* release hold taken by fc_exch_find */ | 
 | } | 
 |  | 
 | /* | 
 |  * Accept sequence with LS_ACC. | 
 |  * If this fails due to allocation or transmit congestion, assume the | 
 |  * originator will repeat the sequence. | 
 |  */ | 
 | static void fc_seq_ls_acc(struct fc_seq *req_sp) | 
 | { | 
 | 	struct fc_seq *sp; | 
 | 	struct fc_els_ls_acc *acc; | 
 | 	struct fc_frame *fp; | 
 |  | 
 | 	sp = fc_seq_start_next(req_sp); | 
 | 	fp = fc_frame_alloc(fc_seq_exch(sp)->lp, sizeof(*acc)); | 
 | 	if (fp) { | 
 | 		acc = fc_frame_payload_get(fp, sizeof(*acc)); | 
 | 		memset(acc, 0, sizeof(*acc)); | 
 | 		acc->la_cmd = ELS_LS_ACC; | 
 | 		fc_seq_send_last(sp, fp, FC_RCTL_ELS_REP, FC_TYPE_ELS); | 
 | 	} | 
 | } | 
 |  | 
 | /* | 
 |  * Reject sequence with ELS LS_RJT. | 
 |  * If this fails due to allocation or transmit congestion, assume the | 
 |  * originator will repeat the sequence. | 
 |  */ | 
 | static void fc_seq_ls_rjt(struct fc_seq *req_sp, enum fc_els_rjt_reason reason, | 
 | 			  enum fc_els_rjt_explan explan) | 
 | { | 
 | 	struct fc_seq *sp; | 
 | 	struct fc_els_ls_rjt *rjt; | 
 | 	struct fc_frame *fp; | 
 |  | 
 | 	sp = fc_seq_start_next(req_sp); | 
 | 	fp = fc_frame_alloc(fc_seq_exch(sp)->lp, sizeof(*rjt)); | 
 | 	if (fp) { | 
 | 		rjt = fc_frame_payload_get(fp, sizeof(*rjt)); | 
 | 		memset(rjt, 0, sizeof(*rjt)); | 
 | 		rjt->er_cmd = ELS_LS_RJT; | 
 | 		rjt->er_reason = reason; | 
 | 		rjt->er_explan = explan; | 
 | 		fc_seq_send_last(sp, fp, FC_RCTL_ELS_REP, FC_TYPE_ELS); | 
 | 	} | 
 | } | 
 |  | 
 | static void fc_exch_reset(struct fc_exch *ep) | 
 | { | 
 | 	struct fc_seq *sp; | 
 | 	void (*resp)(struct fc_seq *, struct fc_frame *, void *); | 
 | 	void *arg; | 
 | 	int rc = 1; | 
 |  | 
 | 	spin_lock_bh(&ep->ex_lock); | 
 | 	ep->state |= FC_EX_RST_CLEANUP; | 
 | 	/* | 
 | 	 * we really want to call del_timer_sync, but cannot due | 
 | 	 * to the lport calling with the lport lock held (some resp | 
 | 	 * functions can also grab the lport lock which could cause | 
 | 	 * a deadlock). | 
 | 	 */ | 
 | 	if (cancel_delayed_work(&ep->timeout_work)) | 
 | 		atomic_dec(&ep->ex_refcnt);	/* drop hold for timer */ | 
 | 	resp = ep->resp; | 
 | 	ep->resp = NULL; | 
 | 	if (ep->esb_stat & ESB_ST_REC_QUAL) | 
 | 		atomic_dec(&ep->ex_refcnt);	/* drop hold for rec_qual */ | 
 | 	ep->esb_stat &= ~ESB_ST_REC_QUAL; | 
 | 	arg = ep->arg; | 
 | 	sp = &ep->seq; | 
 | 	rc = fc_exch_done_locked(ep); | 
 | 	spin_unlock_bh(&ep->ex_lock); | 
 | 	if (!rc) | 
 | 		fc_exch_mgr_delete_ep(ep); | 
 |  | 
 | 	if (resp) | 
 | 		resp(sp, ERR_PTR(-FC_EX_CLOSED), arg); | 
 | } | 
 |  | 
 | /* | 
 |  * Reset an exchange manager, releasing all sequences and exchanges. | 
 |  * If sid is non-zero, reset only exchanges we source from that FID. | 
 |  * If did is non-zero, reset only exchanges destined to that FID. | 
 |  */ | 
 | void fc_exch_mgr_reset(struct fc_exch_mgr *mp, u32 sid, u32 did) | 
 | { | 
 | 	struct fc_exch *ep; | 
 | 	struct fc_exch *next; | 
 |  | 
 | 	spin_lock_bh(&mp->em_lock); | 
 | restart: | 
 | 	list_for_each_entry_safe(ep, next, &mp->ex_list, ex_list) { | 
 | 		if ((sid == 0 || sid == ep->sid) && | 
 | 		    (did == 0 || did == ep->did)) { | 
 | 			fc_exch_hold(ep); | 
 | 			spin_unlock_bh(&mp->em_lock); | 
 |  | 
 | 			fc_exch_reset(ep); | 
 |  | 
 | 			fc_exch_release(ep); | 
 | 			spin_lock_bh(&mp->em_lock); | 
 |  | 
 | 			/* | 
 | 			 * must restart loop incase while lock was down | 
 | 			 * multiple eps were released. | 
 | 			 */ | 
 | 			goto restart; | 
 | 		} | 
 | 	} | 
 | 	spin_unlock_bh(&mp->em_lock); | 
 | } | 
 | EXPORT_SYMBOL(fc_exch_mgr_reset); | 
 |  | 
 | /* | 
 |  * Handle incoming ELS REC - Read Exchange Concise. | 
 |  * Note that the requesting port may be different than the S_ID in the request. | 
 |  */ | 
 | static void fc_exch_els_rec(struct fc_seq *sp, struct fc_frame *rfp) | 
 | { | 
 | 	struct fc_frame *fp; | 
 | 	struct fc_exch *ep; | 
 | 	struct fc_exch_mgr *em; | 
 | 	struct fc_els_rec *rp; | 
 | 	struct fc_els_rec_acc *acc; | 
 | 	enum fc_els_rjt_reason reason = ELS_RJT_LOGIC; | 
 | 	enum fc_els_rjt_explan explan; | 
 | 	u32 sid; | 
 | 	u16 rxid; | 
 | 	u16 oxid; | 
 |  | 
 | 	rp = fc_frame_payload_get(rfp, sizeof(*rp)); | 
 | 	explan = ELS_EXPL_INV_LEN; | 
 | 	if (!rp) | 
 | 		goto reject; | 
 | 	sid = ntoh24(rp->rec_s_id); | 
 | 	rxid = ntohs(rp->rec_rx_id); | 
 | 	oxid = ntohs(rp->rec_ox_id); | 
 |  | 
 | 	/* | 
 | 	 * Currently it's hard to find the local S_ID from the exchange | 
 | 	 * manager.  This will eventually be fixed, but for now it's easier | 
 | 	 * to lookup the subject exchange twice, once as if we were | 
 | 	 * the initiator, and then again if we weren't. | 
 | 	 */ | 
 | 	em = fc_seq_exch(sp)->em; | 
 | 	ep = fc_exch_find(em, oxid); | 
 | 	explan = ELS_EXPL_OXID_RXID; | 
 | 	if (ep && ep->oid == sid) { | 
 | 		if (ep->rxid != FC_XID_UNKNOWN && | 
 | 		    rxid != FC_XID_UNKNOWN && | 
 | 		    ep->rxid != rxid) | 
 | 			goto rel; | 
 | 	} else { | 
 | 		if (ep) | 
 | 			fc_exch_release(ep); | 
 | 		ep = NULL; | 
 | 		if (rxid != FC_XID_UNKNOWN) | 
 | 			ep = fc_exch_find(em, rxid); | 
 | 		if (!ep) | 
 | 			goto reject; | 
 | 	} | 
 |  | 
 | 	fp = fc_frame_alloc(fc_seq_exch(sp)->lp, sizeof(*acc)); | 
 | 	if (!fp) { | 
 | 		fc_exch_done(sp); | 
 | 		goto out; | 
 | 	} | 
 | 	sp = fc_seq_start_next(sp); | 
 | 	acc = fc_frame_payload_get(fp, sizeof(*acc)); | 
 | 	memset(acc, 0, sizeof(*acc)); | 
 | 	acc->reca_cmd = ELS_LS_ACC; | 
 | 	acc->reca_ox_id = rp->rec_ox_id; | 
 | 	memcpy(acc->reca_ofid, rp->rec_s_id, 3); | 
 | 	acc->reca_rx_id = htons(ep->rxid); | 
 | 	if (ep->sid == ep->oid) | 
 | 		hton24(acc->reca_rfid, ep->did); | 
 | 	else | 
 | 		hton24(acc->reca_rfid, ep->sid); | 
 | 	acc->reca_fc4value = htonl(ep->seq.rec_data); | 
 | 	acc->reca_e_stat = htonl(ep->esb_stat & (ESB_ST_RESP | | 
 | 						 ESB_ST_SEQ_INIT | | 
 | 						 ESB_ST_COMPLETE)); | 
 | 	sp = fc_seq_start_next(sp); | 
 | 	fc_seq_send_last(sp, fp, FC_RCTL_ELS_REP, FC_TYPE_ELS); | 
 | out: | 
 | 	fc_exch_release(ep); | 
 | 	fc_frame_free(rfp); | 
 | 	return; | 
 |  | 
 | rel: | 
 | 	fc_exch_release(ep); | 
 | reject: | 
 | 	fc_seq_ls_rjt(sp, reason, explan); | 
 | 	fc_frame_free(rfp); | 
 | } | 
 |  | 
 | /* | 
 |  * Handle response from RRQ. | 
 |  * Not much to do here, really. | 
 |  * Should report errors. | 
 |  * | 
 |  * TODO: fix error handler. | 
 |  */ | 
 | static void fc_exch_rrq_resp(struct fc_seq *sp, struct fc_frame *fp, void *arg) | 
 | { | 
 | 	struct fc_exch *aborted_ep = arg; | 
 | 	unsigned int op; | 
 |  | 
 | 	if (IS_ERR(fp)) { | 
 | 		int err = PTR_ERR(fp); | 
 |  | 
 | 		if (err == -FC_EX_CLOSED) | 
 | 			goto cleanup; | 
 | 		FC_DBG("Cannot process RRQ, because of frame error %d\n", err); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	op = fc_frame_payload_op(fp); | 
 | 	fc_frame_free(fp); | 
 |  | 
 | 	switch (op) { | 
 | 	case ELS_LS_RJT: | 
 | 		FC_DBG("LS_RJT for RRQ"); | 
 | 		/* fall through */ | 
 | 	case ELS_LS_ACC: | 
 | 		goto cleanup; | 
 | 	default: | 
 | 		FC_DBG("unexpected response op %x for RRQ", op); | 
 | 		return; | 
 | 	} | 
 |  | 
 | cleanup: | 
 | 	fc_exch_done(&aborted_ep->seq); | 
 | 	/* drop hold for rec qual */ | 
 | 	fc_exch_release(aborted_ep); | 
 | } | 
 |  | 
 | /* | 
 |  * Send ELS RRQ - Reinstate Recovery Qualifier. | 
 |  * This tells the remote port to stop blocking the use of | 
 |  * the exchange and the seq_cnt range. | 
 |  */ | 
 | static void fc_exch_rrq(struct fc_exch *ep) | 
 | { | 
 | 	struct fc_lport *lp; | 
 | 	struct fc_els_rrq *rrq; | 
 | 	struct fc_frame *fp; | 
 | 	struct fc_seq *rrq_sp; | 
 | 	u32 did; | 
 |  | 
 | 	lp = ep->lp; | 
 |  | 
 | 	fp = fc_frame_alloc(lp, sizeof(*rrq)); | 
 | 	if (!fp) | 
 | 		return; | 
 | 	rrq = fc_frame_payload_get(fp, sizeof(*rrq)); | 
 | 	memset(rrq, 0, sizeof(*rrq)); | 
 | 	rrq->rrq_cmd = ELS_RRQ; | 
 | 	hton24(rrq->rrq_s_id, ep->sid); | 
 | 	rrq->rrq_ox_id = htons(ep->oxid); | 
 | 	rrq->rrq_rx_id = htons(ep->rxid); | 
 |  | 
 | 	did = ep->did; | 
 | 	if (ep->esb_stat & ESB_ST_RESP) | 
 | 		did = ep->sid; | 
 |  | 
 | 	fc_fill_fc_hdr(fp, FC_RCTL_ELS_REQ, did, | 
 | 		       fc_host_port_id(lp->host), FC_TYPE_ELS, | 
 | 		       FC_FC_FIRST_SEQ | FC_FC_END_SEQ | FC_FC_SEQ_INIT, 0); | 
 |  | 
 | 	rrq_sp = fc_exch_seq_send(lp, fp, fc_exch_rrq_resp, NULL, ep, | 
 | 				  lp->e_d_tov); | 
 | 	if (!rrq_sp) { | 
 | 		ep->esb_stat |= ESB_ST_REC_QUAL; | 
 | 		fc_exch_timer_set_locked(ep, ep->r_a_tov); | 
 | 		return; | 
 | 	} | 
 | } | 
 |  | 
 |  | 
 | /* | 
 |  * Handle incoming ELS RRQ - Reset Recovery Qualifier. | 
 |  */ | 
 | static void fc_exch_els_rrq(struct fc_seq *sp, struct fc_frame *fp) | 
 | { | 
 | 	struct fc_exch *ep;		/* request or subject exchange */ | 
 | 	struct fc_els_rrq *rp; | 
 | 	u32 sid; | 
 | 	u16 xid; | 
 | 	enum fc_els_rjt_explan explan; | 
 |  | 
 | 	rp = fc_frame_payload_get(fp, sizeof(*rp)); | 
 | 	explan = ELS_EXPL_INV_LEN; | 
 | 	if (!rp) | 
 | 		goto reject; | 
 |  | 
 | 	/* | 
 | 	 * lookup subject exchange. | 
 | 	 */ | 
 | 	ep = fc_seq_exch(sp); | 
 | 	sid = ntoh24(rp->rrq_s_id);		/* subject source */ | 
 | 	xid = ep->did == sid ? ntohs(rp->rrq_ox_id) : ntohs(rp->rrq_rx_id); | 
 | 	ep = fc_exch_find(ep->em, xid); | 
 |  | 
 | 	explan = ELS_EXPL_OXID_RXID; | 
 | 	if (!ep) | 
 | 		goto reject; | 
 | 	spin_lock_bh(&ep->ex_lock); | 
 | 	if (ep->oxid != ntohs(rp->rrq_ox_id)) | 
 | 		goto unlock_reject; | 
 | 	if (ep->rxid != ntohs(rp->rrq_rx_id) && | 
 | 	    ep->rxid != FC_XID_UNKNOWN) | 
 | 		goto unlock_reject; | 
 | 	explan = ELS_EXPL_SID; | 
 | 	if (ep->sid != sid) | 
 | 		goto unlock_reject; | 
 |  | 
 | 	/* | 
 | 	 * Clear Recovery Qualifier state, and cancel timer if complete. | 
 | 	 */ | 
 | 	if (ep->esb_stat & ESB_ST_REC_QUAL) { | 
 | 		ep->esb_stat &= ~ESB_ST_REC_QUAL; | 
 | 		atomic_dec(&ep->ex_refcnt);	/* drop hold for rec qual */ | 
 | 	} | 
 | 	if (ep->esb_stat & ESB_ST_COMPLETE) { | 
 | 		if (cancel_delayed_work(&ep->timeout_work)) | 
 | 			atomic_dec(&ep->ex_refcnt);	/* drop timer hold */ | 
 | 	} | 
 |  | 
 | 	spin_unlock_bh(&ep->ex_lock); | 
 |  | 
 | 	/* | 
 | 	 * Send LS_ACC. | 
 | 	 */ | 
 | 	fc_seq_ls_acc(sp); | 
 | 	fc_frame_free(fp); | 
 | 	return; | 
 |  | 
 | unlock_reject: | 
 | 	spin_unlock_bh(&ep->ex_lock); | 
 | 	fc_exch_release(ep);	/* drop hold from fc_exch_find */ | 
 | reject: | 
 | 	fc_seq_ls_rjt(sp, ELS_RJT_LOGIC, explan); | 
 | 	fc_frame_free(fp); | 
 | } | 
 |  | 
 | struct fc_exch_mgr *fc_exch_mgr_alloc(struct fc_lport *lp, | 
 | 				      enum fc_class class, | 
 | 				      u16 min_xid, u16 max_xid) | 
 | { | 
 | 	struct fc_exch_mgr *mp; | 
 | 	size_t len; | 
 |  | 
 | 	if (max_xid <= min_xid || min_xid == 0 || max_xid == FC_XID_UNKNOWN) { | 
 | 		FC_DBG("Invalid min_xid 0x:%x and max_xid 0x:%x\n", | 
 | 		       min_xid, max_xid); | 
 | 		return NULL; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * Memory need for EM | 
 | 	 */ | 
 | #define xid_ok(i, m1, m2) (((i) >= (m1)) && ((i) <= (m2))) | 
 | 	len = (max_xid - min_xid + 1) * (sizeof(struct fc_exch *)); | 
 | 	len += sizeof(struct fc_exch_mgr); | 
 |  | 
 | 	mp = kzalloc(len, GFP_ATOMIC); | 
 | 	if (!mp) | 
 | 		return NULL; | 
 |  | 
 | 	mp->class = class; | 
 | 	mp->total_exches = 0; | 
 | 	mp->exches = (struct fc_exch **)(mp + 1); | 
 | 	mp->lp = lp; | 
 | 	/* adjust em exch xid range for offload */ | 
 | 	mp->min_xid = min_xid; | 
 | 	mp->max_xid = max_xid; | 
 | 	mp->last_xid = min_xid - 1; | 
 | 	mp->max_read = 0; | 
 | 	mp->last_read = 0; | 
 | 	if (lp->lro_enabled && xid_ok(lp->lro_xid, min_xid, max_xid)) { | 
 | 		mp->max_read = lp->lro_xid; | 
 | 		mp->last_read = min_xid - 1; | 
 | 		mp->last_xid = mp->max_read; | 
 | 	} else { | 
 | 		/* disable lro if no xid control over read */ | 
 | 		lp->lro_enabled = 0; | 
 | 	} | 
 |  | 
 | 	INIT_LIST_HEAD(&mp->ex_list); | 
 | 	spin_lock_init(&mp->em_lock); | 
 |  | 
 | 	mp->ep_pool = mempool_create_slab_pool(2, fc_em_cachep); | 
 | 	if (!mp->ep_pool) | 
 | 		goto free_mp; | 
 |  | 
 | 	return mp; | 
 |  | 
 | free_mp: | 
 | 	kfree(mp); | 
 | 	return NULL; | 
 | } | 
 | EXPORT_SYMBOL(fc_exch_mgr_alloc); | 
 |  | 
 | void fc_exch_mgr_free(struct fc_exch_mgr *mp) | 
 | { | 
 | 	WARN_ON(!mp); | 
 | 	/* | 
 | 	 * The total exch count must be zero | 
 | 	 * before freeing exchange manager. | 
 | 	 */ | 
 | 	WARN_ON(mp->total_exches != 0); | 
 | 	mempool_destroy(mp->ep_pool); | 
 | 	kfree(mp); | 
 | } | 
 | EXPORT_SYMBOL(fc_exch_mgr_free); | 
 |  | 
 | struct fc_exch *fc_exch_get(struct fc_lport *lp, struct fc_frame *fp) | 
 | { | 
 | 	if (!lp || !lp->emp) | 
 | 		return NULL; | 
 |  | 
 | 	return fc_exch_alloc(lp->emp, fp, 0); | 
 | } | 
 | EXPORT_SYMBOL(fc_exch_get); | 
 |  | 
 | struct fc_seq *fc_exch_seq_send(struct fc_lport *lp, | 
 | 				struct fc_frame *fp, | 
 | 				void (*resp)(struct fc_seq *, | 
 | 					     struct fc_frame *fp, | 
 | 					     void *arg), | 
 | 				void (*destructor)(struct fc_seq *, void *), | 
 | 				void *arg, u32 timer_msec) | 
 | { | 
 | 	struct fc_exch *ep; | 
 | 	struct fc_seq *sp = NULL; | 
 | 	struct fc_frame_header *fh; | 
 | 	int rc = 1; | 
 |  | 
 | 	ep = lp->tt.exch_get(lp, fp); | 
 | 	if (!ep) { | 
 | 		fc_frame_free(fp); | 
 | 		return NULL; | 
 | 	} | 
 | 	ep->esb_stat |= ESB_ST_SEQ_INIT; | 
 | 	fh = fc_frame_header_get(fp); | 
 | 	fc_exch_set_addr(ep, ntoh24(fh->fh_s_id), ntoh24(fh->fh_d_id)); | 
 | 	ep->resp = resp; | 
 | 	ep->destructor = destructor; | 
 | 	ep->arg = arg; | 
 | 	ep->r_a_tov = FC_DEF_R_A_TOV; | 
 | 	ep->lp = lp; | 
 | 	sp = &ep->seq; | 
 |  | 
 | 	ep->fh_type = fh->fh_type; /* save for possbile timeout handling */ | 
 | 	ep->f_ctl = ntoh24(fh->fh_f_ctl); | 
 | 	fc_exch_setup_hdr(ep, fp, ep->f_ctl); | 
 | 	sp->cnt++; | 
 |  | 
 | 	if (unlikely(lp->tt.frame_send(lp, fp))) | 
 | 		goto err; | 
 |  | 
 | 	if (timer_msec) | 
 | 		fc_exch_timer_set_locked(ep, timer_msec); | 
 | 	ep->f_ctl &= ~FC_FC_FIRST_SEQ;	/* not first seq */ | 
 |  | 
 | 	if (ep->f_ctl & FC_FC_SEQ_INIT) | 
 | 		ep->esb_stat &= ~ESB_ST_SEQ_INIT; | 
 | 	spin_unlock_bh(&ep->ex_lock); | 
 | 	return sp; | 
 | err: | 
 | 	rc = fc_exch_done_locked(ep); | 
 | 	spin_unlock_bh(&ep->ex_lock); | 
 | 	if (!rc) | 
 | 		fc_exch_mgr_delete_ep(ep); | 
 | 	return NULL; | 
 | } | 
 | EXPORT_SYMBOL(fc_exch_seq_send); | 
 |  | 
 | /* | 
 |  * Receive a frame | 
 |  */ | 
 | void fc_exch_recv(struct fc_lport *lp, struct fc_exch_mgr *mp, | 
 | 		  struct fc_frame *fp) | 
 | { | 
 | 	struct fc_frame_header *fh = fc_frame_header_get(fp); | 
 | 	u32 f_ctl; | 
 |  | 
 | 	/* lport lock ? */ | 
 | 	if (!lp || !mp || (lp->state == LPORT_ST_NONE)) { | 
 | 		FC_DBG("fc_lport or EM is not allocated and configured"); | 
 | 		fc_frame_free(fp); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * If frame is marked invalid, just drop it. | 
 | 	 */ | 
 | 	f_ctl = ntoh24(fh->fh_f_ctl); | 
 | 	switch (fr_eof(fp)) { | 
 | 	case FC_EOF_T: | 
 | 		if (f_ctl & FC_FC_END_SEQ) | 
 | 			skb_trim(fp_skb(fp), fr_len(fp) - FC_FC_FILL(f_ctl)); | 
 | 		/* fall through */ | 
 | 	case FC_EOF_N: | 
 | 		if (fh->fh_type == FC_TYPE_BLS) | 
 | 			fc_exch_recv_bls(mp, fp); | 
 | 		else if ((f_ctl & (FC_FC_EX_CTX | FC_FC_SEQ_CTX)) == | 
 | 			 FC_FC_EX_CTX) | 
 | 			fc_exch_recv_seq_resp(mp, fp); | 
 | 		else if (f_ctl & FC_FC_SEQ_CTX) | 
 | 			fc_exch_recv_resp(mp, fp); | 
 | 		else | 
 | 			fc_exch_recv_req(lp, mp, fp); | 
 | 		break; | 
 | 	default: | 
 | 		FC_DBG("dropping invalid frame (eof %x)", fr_eof(fp)); | 
 | 		fc_frame_free(fp); | 
 | 		break; | 
 | 	} | 
 | } | 
 | EXPORT_SYMBOL(fc_exch_recv); | 
 |  | 
 | int fc_exch_init(struct fc_lport *lp) | 
 | { | 
 | 	if (!lp->tt.exch_get) { | 
 | 		/* | 
 | 		 *  exch_put() should be NULL if | 
 | 		 *  exch_get() is NULL | 
 | 		 */ | 
 | 		WARN_ON(lp->tt.exch_put); | 
 | 		lp->tt.exch_get = fc_exch_get; | 
 | 	} | 
 |  | 
 | 	if (!lp->tt.seq_start_next) | 
 | 		lp->tt.seq_start_next = fc_seq_start_next; | 
 |  | 
 | 	if (!lp->tt.exch_seq_send) | 
 | 		lp->tt.exch_seq_send = fc_exch_seq_send; | 
 |  | 
 | 	if (!lp->tt.seq_send) | 
 | 		lp->tt.seq_send = fc_seq_send; | 
 |  | 
 | 	if (!lp->tt.seq_els_rsp_send) | 
 | 		lp->tt.seq_els_rsp_send = fc_seq_els_rsp_send; | 
 |  | 
 | 	if (!lp->tt.exch_done) | 
 | 		lp->tt.exch_done = fc_exch_done; | 
 |  | 
 | 	if (!lp->tt.exch_mgr_reset) | 
 | 		lp->tt.exch_mgr_reset = fc_exch_mgr_reset; | 
 |  | 
 | 	if (!lp->tt.seq_exch_abort) | 
 | 		lp->tt.seq_exch_abort = fc_seq_exch_abort; | 
 |  | 
 | 	return 0; | 
 | } | 
 | EXPORT_SYMBOL(fc_exch_init); | 
 |  | 
 | int fc_setup_exch_mgr(void) | 
 | { | 
 | 	fc_em_cachep = kmem_cache_create("libfc_em", sizeof(struct fc_exch), | 
 | 					 0, SLAB_HWCACHE_ALIGN, NULL); | 
 | 	if (!fc_em_cachep) | 
 | 		return -ENOMEM; | 
 | 	return 0; | 
 | } | 
 |  | 
 | void fc_destroy_exch_mgr(void) | 
 | { | 
 | 	kmem_cache_destroy(fc_em_cachep); | 
 | } |