| /* | 
 |  * linux/kernel/itimer.c | 
 |  * | 
 |  * Copyright (C) 1992 Darren Senn | 
 |  */ | 
 |  | 
 | /* These are all the functions necessary to implement itimers */ | 
 |  | 
 | #include <linux/mm.h> | 
 | #include <linux/interrupt.h> | 
 | #include <linux/syscalls.h> | 
 | #include <linux/time.h> | 
 | #include <linux/posix-timers.h> | 
 | #include <linux/hrtimer.h> | 
 |  | 
 | #include <asm/uaccess.h> | 
 |  | 
 | /** | 
 |  * itimer_get_remtime - get remaining time for the timer | 
 |  * | 
 |  * @timer: the timer to read | 
 |  * | 
 |  * Returns the delta between the expiry time and now, which can be | 
 |  * less than zero or 1usec for an pending expired timer | 
 |  */ | 
 | static struct timeval itimer_get_remtime(struct hrtimer *timer) | 
 | { | 
 | 	ktime_t rem = hrtimer_get_remaining(timer); | 
 |  | 
 | 	/* | 
 | 	 * Racy but safe: if the itimer expires after the above | 
 | 	 * hrtimer_get_remtime() call but before this condition | 
 | 	 * then we return 0 - which is correct. | 
 | 	 */ | 
 | 	if (hrtimer_active(timer)) { | 
 | 		if (rem.tv64 <= 0) | 
 | 			rem.tv64 = NSEC_PER_USEC; | 
 | 	} else | 
 | 		rem.tv64 = 0; | 
 |  | 
 | 	return ktime_to_timeval(rem); | 
 | } | 
 |  | 
 | int do_getitimer(int which, struct itimerval *value) | 
 | { | 
 | 	struct task_struct *tsk = current; | 
 | 	cputime_t cinterval, cval; | 
 |  | 
 | 	switch (which) { | 
 | 	case ITIMER_REAL: | 
 | 		spin_lock_irq(&tsk->sighand->siglock); | 
 | 		value->it_value = itimer_get_remtime(&tsk->signal->real_timer); | 
 | 		value->it_interval = | 
 | 			ktime_to_timeval(tsk->signal->it_real_incr); | 
 | 		spin_unlock_irq(&tsk->sighand->siglock); | 
 | 		break; | 
 | 	case ITIMER_VIRTUAL: | 
 | 		spin_lock_irq(&tsk->sighand->siglock); | 
 | 		cval = tsk->signal->it_virt_expires; | 
 | 		cinterval = tsk->signal->it_virt_incr; | 
 | 		if (!cputime_eq(cval, cputime_zero)) { | 
 | 			struct task_cputime cputime; | 
 | 			cputime_t utime; | 
 |  | 
 | 			thread_group_cputime(tsk, &cputime); | 
 | 			utime = cputime.utime; | 
 | 			if (cputime_le(cval, utime)) { /* about to fire */ | 
 | 				cval = jiffies_to_cputime(1); | 
 | 			} else { | 
 | 				cval = cputime_sub(cval, utime); | 
 | 			} | 
 | 		} | 
 | 		spin_unlock_irq(&tsk->sighand->siglock); | 
 | 		cputime_to_timeval(cval, &value->it_value); | 
 | 		cputime_to_timeval(cinterval, &value->it_interval); | 
 | 		break; | 
 | 	case ITIMER_PROF: | 
 | 		spin_lock_irq(&tsk->sighand->siglock); | 
 | 		cval = tsk->signal->it_prof_expires; | 
 | 		cinterval = tsk->signal->it_prof_incr; | 
 | 		if (!cputime_eq(cval, cputime_zero)) { | 
 | 			struct task_cputime times; | 
 | 			cputime_t ptime; | 
 |  | 
 | 			thread_group_cputime(tsk, ×); | 
 | 			ptime = cputime_add(times.utime, times.stime); | 
 | 			if (cputime_le(cval, ptime)) { /* about to fire */ | 
 | 				cval = jiffies_to_cputime(1); | 
 | 			} else { | 
 | 				cval = cputime_sub(cval, ptime); | 
 | 			} | 
 | 		} | 
 | 		spin_unlock_irq(&tsk->sighand->siglock); | 
 | 		cputime_to_timeval(cval, &value->it_value); | 
 | 		cputime_to_timeval(cinterval, &value->it_interval); | 
 | 		break; | 
 | 	default: | 
 | 		return(-EINVAL); | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | SYSCALL_DEFINE2(getitimer, int, which, struct itimerval __user *, value) | 
 | { | 
 | 	int error = -EFAULT; | 
 | 	struct itimerval get_buffer; | 
 |  | 
 | 	if (value) { | 
 | 		error = do_getitimer(which, &get_buffer); | 
 | 		if (!error && | 
 | 		    copy_to_user(value, &get_buffer, sizeof(get_buffer))) | 
 | 			error = -EFAULT; | 
 | 	} | 
 | 	return error; | 
 | } | 
 |  | 
 |  | 
 | /* | 
 |  * The timer is automagically restarted, when interval != 0 | 
 |  */ | 
 | enum hrtimer_restart it_real_fn(struct hrtimer *timer) | 
 | { | 
 | 	struct signal_struct *sig = | 
 | 		container_of(timer, struct signal_struct, real_timer); | 
 |  | 
 | 	kill_pid_info(SIGALRM, SEND_SIG_PRIV, sig->leader_pid); | 
 |  | 
 | 	return HRTIMER_NORESTART; | 
 | } | 
 |  | 
 | /* | 
 |  * Returns true if the timeval is in canonical form | 
 |  */ | 
 | #define timeval_valid(t) \ | 
 | 	(((t)->tv_sec >= 0) && (((unsigned long) (t)->tv_usec) < USEC_PER_SEC)) | 
 |  | 
 | int do_setitimer(int which, struct itimerval *value, struct itimerval *ovalue) | 
 | { | 
 | 	struct task_struct *tsk = current; | 
 | 	struct hrtimer *timer; | 
 | 	ktime_t expires; | 
 | 	cputime_t cval, cinterval, nval, ninterval; | 
 |  | 
 | 	/* | 
 | 	 * Validate the timevals in value. | 
 | 	 */ | 
 | 	if (!timeval_valid(&value->it_value) || | 
 | 	    !timeval_valid(&value->it_interval)) | 
 | 		return -EINVAL; | 
 |  | 
 | 	switch (which) { | 
 | 	case ITIMER_REAL: | 
 | again: | 
 | 		spin_lock_irq(&tsk->sighand->siglock); | 
 | 		timer = &tsk->signal->real_timer; | 
 | 		if (ovalue) { | 
 | 			ovalue->it_value = itimer_get_remtime(timer); | 
 | 			ovalue->it_interval | 
 | 				= ktime_to_timeval(tsk->signal->it_real_incr); | 
 | 		} | 
 | 		/* We are sharing ->siglock with it_real_fn() */ | 
 | 		if (hrtimer_try_to_cancel(timer) < 0) { | 
 | 			spin_unlock_irq(&tsk->sighand->siglock); | 
 | 			goto again; | 
 | 		} | 
 | 		expires = timeval_to_ktime(value->it_value); | 
 | 		if (expires.tv64 != 0) { | 
 | 			tsk->signal->it_real_incr = | 
 | 				timeval_to_ktime(value->it_interval); | 
 | 			hrtimer_start(timer, expires, HRTIMER_MODE_REL); | 
 | 		} else | 
 | 			tsk->signal->it_real_incr.tv64 = 0; | 
 |  | 
 | 		spin_unlock_irq(&tsk->sighand->siglock); | 
 | 		break; | 
 | 	case ITIMER_VIRTUAL: | 
 | 		nval = timeval_to_cputime(&value->it_value); | 
 | 		ninterval = timeval_to_cputime(&value->it_interval); | 
 | 		spin_lock_irq(&tsk->sighand->siglock); | 
 | 		cval = tsk->signal->it_virt_expires; | 
 | 		cinterval = tsk->signal->it_virt_incr; | 
 | 		if (!cputime_eq(cval, cputime_zero) || | 
 | 		    !cputime_eq(nval, cputime_zero)) { | 
 | 			if (cputime_gt(nval, cputime_zero)) | 
 | 				nval = cputime_add(nval, | 
 | 						   jiffies_to_cputime(1)); | 
 | 			set_process_cpu_timer(tsk, CPUCLOCK_VIRT, | 
 | 					      &nval, &cval); | 
 | 		} | 
 | 		tsk->signal->it_virt_expires = nval; | 
 | 		tsk->signal->it_virt_incr = ninterval; | 
 | 		spin_unlock_irq(&tsk->sighand->siglock); | 
 | 		if (ovalue) { | 
 | 			cputime_to_timeval(cval, &ovalue->it_value); | 
 | 			cputime_to_timeval(cinterval, &ovalue->it_interval); | 
 | 		} | 
 | 		break; | 
 | 	case ITIMER_PROF: | 
 | 		nval = timeval_to_cputime(&value->it_value); | 
 | 		ninterval = timeval_to_cputime(&value->it_interval); | 
 | 		spin_lock_irq(&tsk->sighand->siglock); | 
 | 		cval = tsk->signal->it_prof_expires; | 
 | 		cinterval = tsk->signal->it_prof_incr; | 
 | 		if (!cputime_eq(cval, cputime_zero) || | 
 | 		    !cputime_eq(nval, cputime_zero)) { | 
 | 			if (cputime_gt(nval, cputime_zero)) | 
 | 				nval = cputime_add(nval, | 
 | 						   jiffies_to_cputime(1)); | 
 | 			set_process_cpu_timer(tsk, CPUCLOCK_PROF, | 
 | 					      &nval, &cval); | 
 | 		} | 
 | 		tsk->signal->it_prof_expires = nval; | 
 | 		tsk->signal->it_prof_incr = ninterval; | 
 | 		spin_unlock_irq(&tsk->sighand->siglock); | 
 | 		if (ovalue) { | 
 | 			cputime_to_timeval(cval, &ovalue->it_value); | 
 | 			cputime_to_timeval(cinterval, &ovalue->it_interval); | 
 | 		} | 
 | 		break; | 
 | 	default: | 
 | 		return -EINVAL; | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | /** | 
 |  * alarm_setitimer - set alarm in seconds | 
 |  * | 
 |  * @seconds:	number of seconds until alarm | 
 |  *		0 disables the alarm | 
 |  * | 
 |  * Returns the remaining time in seconds of a pending timer or 0 when | 
 |  * the timer is not active. | 
 |  * | 
 |  * On 32 bit machines the seconds value is limited to (INT_MAX/2) to avoid | 
 |  * negative timeval settings which would cause immediate expiry. | 
 |  */ | 
 | unsigned int alarm_setitimer(unsigned int seconds) | 
 | { | 
 | 	struct itimerval it_new, it_old; | 
 |  | 
 | #if BITS_PER_LONG < 64 | 
 | 	if (seconds > INT_MAX) | 
 | 		seconds = INT_MAX; | 
 | #endif | 
 | 	it_new.it_value.tv_sec = seconds; | 
 | 	it_new.it_value.tv_usec = 0; | 
 | 	it_new.it_interval.tv_sec = it_new.it_interval.tv_usec = 0; | 
 |  | 
 | 	do_setitimer(ITIMER_REAL, &it_new, &it_old); | 
 |  | 
 | 	/* | 
 | 	 * We can't return 0 if we have an alarm pending ...  And we'd | 
 | 	 * better return too much than too little anyway | 
 | 	 */ | 
 | 	if ((!it_old.it_value.tv_sec && it_old.it_value.tv_usec) || | 
 | 	      it_old.it_value.tv_usec >= 500000) | 
 | 		it_old.it_value.tv_sec++; | 
 |  | 
 | 	return it_old.it_value.tv_sec; | 
 | } | 
 |  | 
 | SYSCALL_DEFINE3(setitimer, int, which, struct itimerval __user *, value, | 
 | 		struct itimerval __user *, ovalue) | 
 | { | 
 | 	struct itimerval set_buffer, get_buffer; | 
 | 	int error; | 
 |  | 
 | 	if (value) { | 
 | 		if(copy_from_user(&set_buffer, value, sizeof(set_buffer))) | 
 | 			return -EFAULT; | 
 | 	} else | 
 | 		memset((char *) &set_buffer, 0, sizeof(set_buffer)); | 
 |  | 
 | 	error = do_setitimer(which, &set_buffer, ovalue ? &get_buffer : NULL); | 
 | 	if (error || !ovalue) | 
 | 		return error; | 
 |  | 
 | 	if (copy_to_user(ovalue, &get_buffer, sizeof(get_buffer))) | 
 | 		return -EFAULT; | 
 | 	return 0; | 
 | } |