| Kernel driver ds2482 |
| ==================== |
| |
| Supported chips: |
| * Maxim DS2482-100, Maxim DS2482-800 |
| Prefix: 'ds2482' |
| Addresses scanned: None |
| Datasheets: |
| http://datasheets.maxim-ic.com/en/ds/DS2482-100.pdf |
| http://datasheets.maxim-ic.com/en/ds/DS2482-800.pdf |
| |
| Author: Ben Gardner <bgardner@wabtec.com> |
| |
| |
| Description |
| ----------- |
| |
| The Maxim/Dallas Semiconductor DS2482 is a I2C device that provides |
| one (DS2482-100) or eight (DS2482-800) 1-wire busses. |
| |
| |
| General Remarks |
| --------------- |
| |
| Valid addresses are 0x18, 0x19, 0x1a, and 0x1b. |
| However, the device cannot be detected without writing to the i2c bus, so no |
| detection is done. You should instantiate the device explicitly. |
| |
| $ modprobe ds2482 |
| $ echo ds2482 0x18 > /sys/bus/i2c/devices/i2c-0/new_device |
| |