|  | /* | 
|  | * Copyright (c) 2000-2001 Adaptec Inc. | 
|  | * All rights reserved. | 
|  | * | 
|  | * Redistribution and use in source and binary forms, with or without | 
|  | * modification, are permitted provided that the following conditions | 
|  | * are met: | 
|  | * 1. Redistributions of source code must retain the above copyright | 
|  | *    notice, this list of conditions, and the following disclaimer, | 
|  | *    without modification. | 
|  | * 2. Redistributions in binary form must reproduce at minimum a disclaimer | 
|  | *    substantially similar to the "NO WARRANTY" disclaimer below | 
|  | *    ("Disclaimer") and any redistribution must be conditioned upon | 
|  | *    including a substantially similar Disclaimer requirement for further | 
|  | *    binary redistribution. | 
|  | * 3. Neither the names of the above-listed copyright holders nor the names | 
|  | *    of any contributors may be used to endorse or promote products derived | 
|  | *    from this software without specific prior written permission. | 
|  | * | 
|  | * Alternatively, this software may be distributed under the terms of the | 
|  | * GNU General Public License ("GPL") version 2 as published by the Free | 
|  | * Software Foundation. | 
|  | * | 
|  | * NO WARRANTY | 
|  | * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS | 
|  | * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT | 
|  | * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR | 
|  | * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT | 
|  | * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL | 
|  | * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS | 
|  | * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) | 
|  | * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, | 
|  | * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING | 
|  | * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE | 
|  | * POSSIBILITY OF SUCH DAMAGES. | 
|  | * | 
|  | * String handling code courtesy of Gerard Roudier's <groudier@club-internet.fr> | 
|  | * sym driver. | 
|  | * | 
|  | * $Id: //depot/aic7xxx/linux/drivers/scsi/aic7xxx/aic7xxx_proc.c#29 $ | 
|  | */ | 
|  | #include "aic7xxx_osm.h" | 
|  | #include "aic7xxx_inline.h" | 
|  | #include "aic7xxx_93cx6.h" | 
|  |  | 
|  | static void	copy_mem_info(struct info_str *info, char *data, int len); | 
|  | static int	copy_info(struct info_str *info, char *fmt, ...); | 
|  | static void	ahc_dump_target_state(struct ahc_softc *ahc, | 
|  | struct info_str *info, | 
|  | u_int our_id, char channel, | 
|  | u_int target_id, u_int target_offset); | 
|  | static void	ahc_dump_device_state(struct info_str *info, | 
|  | struct scsi_device *dev); | 
|  | static int	ahc_proc_write_seeprom(struct ahc_softc *ahc, | 
|  | char *buffer, int length); | 
|  |  | 
|  | /* | 
|  | * Table of syncrates that don't follow the "divisible by 4" | 
|  | * rule. This table will be expanded in future SCSI specs. | 
|  | */ | 
|  | static const struct { | 
|  | u_int period_factor; | 
|  | u_int period;	/* in 100ths of ns */ | 
|  | } scsi_syncrates[] = { | 
|  | { 0x08, 625 },	/* FAST-160 */ | 
|  | { 0x09, 1250 },	/* FAST-80 */ | 
|  | { 0x0a, 2500 },	/* FAST-40 40MHz */ | 
|  | { 0x0b, 3030 },	/* FAST-40 33MHz */ | 
|  | { 0x0c, 5000 }	/* FAST-20 */ | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * Return the frequency in kHz corresponding to the given | 
|  | * sync period factor. | 
|  | */ | 
|  | static u_int | 
|  | ahc_calc_syncsrate(u_int period_factor) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | /* See if the period is in the "exception" table */ | 
|  | for (i = 0; i < ARRAY_SIZE(scsi_syncrates); i++) { | 
|  |  | 
|  | if (period_factor == scsi_syncrates[i].period_factor) { | 
|  | /* Period in kHz */ | 
|  | return (100000000 / scsi_syncrates[i].period); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Wasn't in the table, so use the standard | 
|  | * 4 times conversion. | 
|  | */ | 
|  | return (10000000 / (period_factor * 4 * 10)); | 
|  | } | 
|  |  | 
|  |  | 
|  | static void | 
|  | copy_mem_info(struct info_str *info, char *data, int len) | 
|  | { | 
|  | if (info->pos + len > info->offset + info->length) | 
|  | len = info->offset + info->length - info->pos; | 
|  |  | 
|  | if (info->pos + len < info->offset) { | 
|  | info->pos += len; | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (info->pos < info->offset) { | 
|  | off_t partial; | 
|  |  | 
|  | partial = info->offset - info->pos; | 
|  | data += partial; | 
|  | info->pos += partial; | 
|  | len  -= partial; | 
|  | } | 
|  |  | 
|  | if (len > 0) { | 
|  | memcpy(info->buffer, data, len); | 
|  | info->pos += len; | 
|  | info->buffer += len; | 
|  | } | 
|  | } | 
|  |  | 
|  | static int | 
|  | copy_info(struct info_str *info, char *fmt, ...) | 
|  | { | 
|  | va_list args; | 
|  | char buf[256]; | 
|  | int len; | 
|  |  | 
|  | va_start(args, fmt); | 
|  | len = vsprintf(buf, fmt, args); | 
|  | va_end(args); | 
|  |  | 
|  | copy_mem_info(info, buf, len); | 
|  | return (len); | 
|  | } | 
|  |  | 
|  | static void | 
|  | ahc_format_transinfo(struct info_str *info, struct ahc_transinfo *tinfo) | 
|  | { | 
|  | u_int speed; | 
|  | u_int freq; | 
|  | u_int mb; | 
|  |  | 
|  | speed = 3300; | 
|  | freq = 0; | 
|  | if (tinfo->offset != 0) { | 
|  | freq = ahc_calc_syncsrate(tinfo->period); | 
|  | speed = freq; | 
|  | } | 
|  | speed *= (0x01 << tinfo->width); | 
|  | mb = speed / 1000; | 
|  | if (mb > 0) | 
|  | copy_info(info, "%d.%03dMB/s transfers", mb, speed % 1000); | 
|  | else | 
|  | copy_info(info, "%dKB/s transfers", speed); | 
|  |  | 
|  | if (freq != 0) { | 
|  | copy_info(info, " (%d.%03dMHz%s, offset %d", | 
|  | freq / 1000, freq % 1000, | 
|  | (tinfo->ppr_options & MSG_EXT_PPR_DT_REQ) != 0 | 
|  | ? " DT" : "", tinfo->offset); | 
|  | } | 
|  |  | 
|  | if (tinfo->width > 0) { | 
|  | if (freq != 0) { | 
|  | copy_info(info, ", "); | 
|  | } else { | 
|  | copy_info(info, " ("); | 
|  | } | 
|  | copy_info(info, "%dbit)", 8 * (0x01 << tinfo->width)); | 
|  | } else if (freq != 0) { | 
|  | copy_info(info, ")"); | 
|  | } | 
|  | copy_info(info, "\n"); | 
|  | } | 
|  |  | 
|  | static void | 
|  | ahc_dump_target_state(struct ahc_softc *ahc, struct info_str *info, | 
|  | u_int our_id, char channel, u_int target_id, | 
|  | u_int target_offset) | 
|  | { | 
|  | struct	scsi_target *starget; | 
|  | struct	ahc_initiator_tinfo *tinfo; | 
|  | struct	ahc_tmode_tstate *tstate; | 
|  | int	lun; | 
|  |  | 
|  | tinfo = ahc_fetch_transinfo(ahc, channel, our_id, | 
|  | target_id, &tstate); | 
|  | if ((ahc->features & AHC_TWIN) != 0) | 
|  | copy_info(info, "Channel %c ", channel); | 
|  | copy_info(info, "Target %d Negotiation Settings\n", target_id); | 
|  | copy_info(info, "\tUser: "); | 
|  | ahc_format_transinfo(info, &tinfo->user); | 
|  | starget = ahc->platform_data->starget[target_offset]; | 
|  | if (!starget) | 
|  | return; | 
|  |  | 
|  | copy_info(info, "\tGoal: "); | 
|  | ahc_format_transinfo(info, &tinfo->goal); | 
|  | copy_info(info, "\tCurr: "); | 
|  | ahc_format_transinfo(info, &tinfo->curr); | 
|  |  | 
|  | for (lun = 0; lun < AHC_NUM_LUNS; lun++) { | 
|  | struct scsi_device *sdev; | 
|  |  | 
|  | sdev = scsi_device_lookup_by_target(starget, lun); | 
|  |  | 
|  | if (sdev == NULL) | 
|  | continue; | 
|  |  | 
|  | ahc_dump_device_state(info, sdev); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void | 
|  | ahc_dump_device_state(struct info_str *info, struct scsi_device *sdev) | 
|  | { | 
|  | struct ahc_linux_device *dev = scsi_transport_device_data(sdev); | 
|  |  | 
|  | copy_info(info, "\tChannel %c Target %d Lun %d Settings\n", | 
|  | sdev->sdev_target->channel + 'A', | 
|  | sdev->sdev_target->id, sdev->lun); | 
|  |  | 
|  | copy_info(info, "\t\tCommands Queued %ld\n", dev->commands_issued); | 
|  | copy_info(info, "\t\tCommands Active %d\n", dev->active); | 
|  | copy_info(info, "\t\tCommand Openings %d\n", dev->openings); | 
|  | copy_info(info, "\t\tMax Tagged Openings %d\n", dev->maxtags); | 
|  | copy_info(info, "\t\tDevice Queue Frozen Count %d\n", dev->qfrozen); | 
|  | } | 
|  |  | 
|  | static int | 
|  | ahc_proc_write_seeprom(struct ahc_softc *ahc, char *buffer, int length) | 
|  | { | 
|  | struct seeprom_descriptor sd; | 
|  | int have_seeprom; | 
|  | u_long s; | 
|  | int paused; | 
|  | int written; | 
|  |  | 
|  | /* Default to failure. */ | 
|  | written = -EINVAL; | 
|  | ahc_lock(ahc, &s); | 
|  | paused = ahc_is_paused(ahc); | 
|  | if (!paused) | 
|  | ahc_pause(ahc); | 
|  |  | 
|  | if (length != sizeof(struct seeprom_config)) { | 
|  | printk("ahc_proc_write_seeprom: incorrect buffer size\n"); | 
|  | goto done; | 
|  | } | 
|  |  | 
|  | have_seeprom = ahc_verify_cksum((struct seeprom_config*)buffer); | 
|  | if (have_seeprom == 0) { | 
|  | printk("ahc_proc_write_seeprom: cksum verification failed\n"); | 
|  | goto done; | 
|  | } | 
|  |  | 
|  | sd.sd_ahc = ahc; | 
|  | #if AHC_PCI_CONFIG > 0 | 
|  | if ((ahc->chip & AHC_PCI) != 0) { | 
|  | sd.sd_control_offset = SEECTL; | 
|  | sd.sd_status_offset = SEECTL; | 
|  | sd.sd_dataout_offset = SEECTL; | 
|  | if (ahc->flags & AHC_LARGE_SEEPROM) | 
|  | sd.sd_chip = C56_66; | 
|  | else | 
|  | sd.sd_chip = C46; | 
|  | sd.sd_MS = SEEMS; | 
|  | sd.sd_RDY = SEERDY; | 
|  | sd.sd_CS = SEECS; | 
|  | sd.sd_CK = SEECK; | 
|  | sd.sd_DO = SEEDO; | 
|  | sd.sd_DI = SEEDI; | 
|  | have_seeprom = ahc_acquire_seeprom(ahc, &sd); | 
|  | } else | 
|  | #endif | 
|  | if ((ahc->chip & AHC_VL) != 0) { | 
|  | sd.sd_control_offset = SEECTL_2840; | 
|  | sd.sd_status_offset = STATUS_2840; | 
|  | sd.sd_dataout_offset = STATUS_2840; | 
|  | sd.sd_chip = C46; | 
|  | sd.sd_MS = 0; | 
|  | sd.sd_RDY = EEPROM_TF; | 
|  | sd.sd_CS = CS_2840; | 
|  | sd.sd_CK = CK_2840; | 
|  | sd.sd_DO = DO_2840; | 
|  | sd.sd_DI = DI_2840; | 
|  | have_seeprom = TRUE; | 
|  | } else { | 
|  | printk("ahc_proc_write_seeprom: unsupported adapter type\n"); | 
|  | goto done; | 
|  | } | 
|  |  | 
|  | if (!have_seeprom) { | 
|  | printk("ahc_proc_write_seeprom: No Serial EEPROM\n"); | 
|  | goto done; | 
|  | } else { | 
|  | u_int start_addr; | 
|  |  | 
|  | if (ahc->seep_config == NULL) { | 
|  | ahc->seep_config = kmalloc(sizeof(*ahc->seep_config), GFP_ATOMIC); | 
|  | if (ahc->seep_config == NULL) { | 
|  | printk("aic7xxx: Unable to allocate serial " | 
|  | "eeprom buffer.  Write failing\n"); | 
|  | goto done; | 
|  | } | 
|  | } | 
|  | printk("aic7xxx: Writing Serial EEPROM\n"); | 
|  | start_addr = 32 * (ahc->channel - 'A'); | 
|  | ahc_write_seeprom(&sd, (u_int16_t *)buffer, start_addr, | 
|  | sizeof(struct seeprom_config)/2); | 
|  | ahc_read_seeprom(&sd, (uint16_t *)ahc->seep_config, | 
|  | start_addr, sizeof(struct seeprom_config)/2); | 
|  | #if AHC_PCI_CONFIG > 0 | 
|  | if ((ahc->chip & AHC_VL) == 0) | 
|  | ahc_release_seeprom(&sd); | 
|  | #endif | 
|  | written = length; | 
|  | } | 
|  |  | 
|  | done: | 
|  | if (!paused) | 
|  | ahc_unpause(ahc); | 
|  | ahc_unlock(ahc, &s); | 
|  | return (written); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Return information to handle /proc support for the driver. | 
|  | */ | 
|  | int | 
|  | ahc_linux_proc_info(struct Scsi_Host *shost, char *buffer, char **start, | 
|  | off_t offset, int length, int inout) | 
|  | { | 
|  | struct	ahc_softc *ahc = *(struct ahc_softc **)shost->hostdata; | 
|  | struct	info_str info; | 
|  | char	ahc_info[256]; | 
|  | u_int	max_targ; | 
|  | u_int	i; | 
|  | int	retval; | 
|  |  | 
|  | /* Has data been written to the file? */ | 
|  | if (inout == TRUE) { | 
|  | retval = ahc_proc_write_seeprom(ahc, buffer, length); | 
|  | goto done; | 
|  | } | 
|  |  | 
|  | if (start) | 
|  | *start = buffer; | 
|  |  | 
|  | info.buffer	= buffer; | 
|  | info.length	= length; | 
|  | info.offset	= offset; | 
|  | info.pos	= 0; | 
|  |  | 
|  | copy_info(&info, "Adaptec AIC7xxx driver version: %s\n", | 
|  | AIC7XXX_DRIVER_VERSION); | 
|  | copy_info(&info, "%s\n", ahc->description); | 
|  | ahc_controller_info(ahc, ahc_info); | 
|  | copy_info(&info, "%s\n", ahc_info); | 
|  | copy_info(&info, "Allocated SCBs: %d, SG List Length: %d\n\n", | 
|  | ahc->scb_data->numscbs, AHC_NSEG); | 
|  |  | 
|  |  | 
|  | if (ahc->seep_config == NULL) | 
|  | copy_info(&info, "No Serial EEPROM\n"); | 
|  | else { | 
|  | copy_info(&info, "Serial EEPROM:\n"); | 
|  | for (i = 0; i < sizeof(*ahc->seep_config)/2; i++) { | 
|  | if (((i % 8) == 0) && (i != 0)) { | 
|  | copy_info(&info, "\n"); | 
|  | } | 
|  | copy_info(&info, "0x%.4x ", | 
|  | ((uint16_t*)ahc->seep_config)[i]); | 
|  | } | 
|  | copy_info(&info, "\n"); | 
|  | } | 
|  | copy_info(&info, "\n"); | 
|  |  | 
|  | max_targ = 16; | 
|  | if ((ahc->features & (AHC_WIDE|AHC_TWIN)) == 0) | 
|  | max_targ = 8; | 
|  |  | 
|  | for (i = 0; i < max_targ; i++) { | 
|  | u_int our_id; | 
|  | u_int target_id; | 
|  | char channel; | 
|  |  | 
|  | channel = 'A'; | 
|  | our_id = ahc->our_id; | 
|  | target_id = i; | 
|  | if (i > 7 && (ahc->features & AHC_TWIN) != 0) { | 
|  | channel = 'B'; | 
|  | our_id = ahc->our_id_b; | 
|  | target_id = i % 8; | 
|  | } | 
|  |  | 
|  | ahc_dump_target_state(ahc, &info, our_id, | 
|  | channel, target_id, i); | 
|  | } | 
|  | retval = info.pos > info.offset ? info.pos - info.offset : 0; | 
|  | done: | 
|  | return (retval); | 
|  | } |