|  | /* -*- mode: c; c-basic-offset: 8; -*- | 
|  | * vim: noexpandtab sw=8 ts=8 sts=0: | 
|  | * | 
|  | * file.c | 
|  | * | 
|  | * File open, close, extend, truncate | 
|  | * | 
|  | * Copyright (C) 2002, 2004 Oracle.  All rights reserved. | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or | 
|  | * modify it under the terms of the GNU General Public | 
|  | * License as published by the Free Software Foundation; either | 
|  | * version 2 of the License, or (at your option) any later version. | 
|  | * | 
|  | * This program is distributed in the hope that it will be useful, | 
|  | * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU | 
|  | * General Public License for more details. | 
|  | * | 
|  | * You should have received a copy of the GNU General Public | 
|  | * License along with this program; if not, write to the | 
|  | * Free Software Foundation, Inc., 59 Temple Place - Suite 330, | 
|  | * Boston, MA 021110-1307, USA. | 
|  | */ | 
|  |  | 
|  | #include <linux/capability.h> | 
|  | #include <linux/fs.h> | 
|  | #include <linux/types.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/highmem.h> | 
|  | #include <linux/pagemap.h> | 
|  | #include <linux/uio.h> | 
|  | #include <linux/sched.h> | 
|  | #include <linux/splice.h> | 
|  | #include <linux/mount.h> | 
|  | #include <linux/writeback.h> | 
|  | #include <linux/falloc.h> | 
|  | #include <linux/quotaops.h> | 
|  | #include <linux/blkdev.h> | 
|  |  | 
|  | #include <cluster/masklog.h> | 
|  |  | 
|  | #include "ocfs2.h" | 
|  |  | 
|  | #include "alloc.h" | 
|  | #include "aops.h" | 
|  | #include "dir.h" | 
|  | #include "dlmglue.h" | 
|  | #include "extent_map.h" | 
|  | #include "file.h" | 
|  | #include "sysfile.h" | 
|  | #include "inode.h" | 
|  | #include "ioctl.h" | 
|  | #include "journal.h" | 
|  | #include "locks.h" | 
|  | #include "mmap.h" | 
|  | #include "suballoc.h" | 
|  | #include "super.h" | 
|  | #include "xattr.h" | 
|  | #include "acl.h" | 
|  | #include "quota.h" | 
|  | #include "refcounttree.h" | 
|  | #include "ocfs2_trace.h" | 
|  |  | 
|  | #include "buffer_head_io.h" | 
|  |  | 
|  | static int ocfs2_init_file_private(struct inode *inode, struct file *file) | 
|  | { | 
|  | struct ocfs2_file_private *fp; | 
|  |  | 
|  | fp = kzalloc(sizeof(struct ocfs2_file_private), GFP_KERNEL); | 
|  | if (!fp) | 
|  | return -ENOMEM; | 
|  |  | 
|  | fp->fp_file = file; | 
|  | mutex_init(&fp->fp_mutex); | 
|  | ocfs2_file_lock_res_init(&fp->fp_flock, fp); | 
|  | file->private_data = fp; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void ocfs2_free_file_private(struct inode *inode, struct file *file) | 
|  | { | 
|  | struct ocfs2_file_private *fp = file->private_data; | 
|  | struct ocfs2_super *osb = OCFS2_SB(inode->i_sb); | 
|  |  | 
|  | if (fp) { | 
|  | ocfs2_simple_drop_lockres(osb, &fp->fp_flock); | 
|  | ocfs2_lock_res_free(&fp->fp_flock); | 
|  | kfree(fp); | 
|  | file->private_data = NULL; | 
|  | } | 
|  | } | 
|  |  | 
|  | static int ocfs2_file_open(struct inode *inode, struct file *file) | 
|  | { | 
|  | int status; | 
|  | int mode = file->f_flags; | 
|  | struct ocfs2_inode_info *oi = OCFS2_I(inode); | 
|  |  | 
|  | trace_ocfs2_file_open(inode, file, file->f_path.dentry, | 
|  | (unsigned long long)OCFS2_I(inode)->ip_blkno, | 
|  | file->f_path.dentry->d_name.len, | 
|  | file->f_path.dentry->d_name.name, mode); | 
|  |  | 
|  | if (file->f_mode & FMODE_WRITE) | 
|  | dquot_initialize(inode); | 
|  |  | 
|  | spin_lock(&oi->ip_lock); | 
|  |  | 
|  | /* Check that the inode hasn't been wiped from disk by another | 
|  | * node. If it hasn't then we're safe as long as we hold the | 
|  | * spin lock until our increment of open count. */ | 
|  | if (OCFS2_I(inode)->ip_flags & OCFS2_INODE_DELETED) { | 
|  | spin_unlock(&oi->ip_lock); | 
|  |  | 
|  | status = -ENOENT; | 
|  | goto leave; | 
|  | } | 
|  |  | 
|  | if (mode & O_DIRECT) | 
|  | oi->ip_flags |= OCFS2_INODE_OPEN_DIRECT; | 
|  |  | 
|  | oi->ip_open_count++; | 
|  | spin_unlock(&oi->ip_lock); | 
|  |  | 
|  | status = ocfs2_init_file_private(inode, file); | 
|  | if (status) { | 
|  | /* | 
|  | * We want to set open count back if we're failing the | 
|  | * open. | 
|  | */ | 
|  | spin_lock(&oi->ip_lock); | 
|  | oi->ip_open_count--; | 
|  | spin_unlock(&oi->ip_lock); | 
|  | } | 
|  |  | 
|  | leave: | 
|  | return status; | 
|  | } | 
|  |  | 
|  | static int ocfs2_file_release(struct inode *inode, struct file *file) | 
|  | { | 
|  | struct ocfs2_inode_info *oi = OCFS2_I(inode); | 
|  |  | 
|  | spin_lock(&oi->ip_lock); | 
|  | if (!--oi->ip_open_count) | 
|  | oi->ip_flags &= ~OCFS2_INODE_OPEN_DIRECT; | 
|  |  | 
|  | trace_ocfs2_file_release(inode, file, file->f_path.dentry, | 
|  | oi->ip_blkno, | 
|  | file->f_path.dentry->d_name.len, | 
|  | file->f_path.dentry->d_name.name, | 
|  | oi->ip_open_count); | 
|  | spin_unlock(&oi->ip_lock); | 
|  |  | 
|  | ocfs2_free_file_private(inode, file); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ocfs2_dir_open(struct inode *inode, struct file *file) | 
|  | { | 
|  | return ocfs2_init_file_private(inode, file); | 
|  | } | 
|  |  | 
|  | static int ocfs2_dir_release(struct inode *inode, struct file *file) | 
|  | { | 
|  | ocfs2_free_file_private(inode, file); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ocfs2_sync_file(struct file *file, loff_t start, loff_t end, | 
|  | int datasync) | 
|  | { | 
|  | int err = 0; | 
|  | journal_t *journal; | 
|  | struct inode *inode = file->f_mapping->host; | 
|  | struct ocfs2_super *osb = OCFS2_SB(inode->i_sb); | 
|  |  | 
|  | trace_ocfs2_sync_file(inode, file, file->f_path.dentry, | 
|  | OCFS2_I(inode)->ip_blkno, | 
|  | file->f_path.dentry->d_name.len, | 
|  | file->f_path.dentry->d_name.name, | 
|  | (unsigned long long)datasync); | 
|  |  | 
|  | err = filemap_write_and_wait_range(inode->i_mapping, start, end); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | /* | 
|  | * Probably don't need the i_mutex at all in here, just putting it here | 
|  | * to be consistent with how fsync used to be called, someone more | 
|  | * familiar with the fs could possibly remove it. | 
|  | */ | 
|  | mutex_lock(&inode->i_mutex); | 
|  | if (datasync && !(inode->i_state & I_DIRTY_DATASYNC)) { | 
|  | /* | 
|  | * We still have to flush drive's caches to get data to the | 
|  | * platter | 
|  | */ | 
|  | if (osb->s_mount_opt & OCFS2_MOUNT_BARRIER) | 
|  | blkdev_issue_flush(inode->i_sb->s_bdev, GFP_KERNEL, NULL); | 
|  | goto bail; | 
|  | } | 
|  |  | 
|  | journal = osb->journal->j_journal; | 
|  | err = jbd2_journal_force_commit(journal); | 
|  |  | 
|  | bail: | 
|  | if (err) | 
|  | mlog_errno(err); | 
|  | mutex_unlock(&inode->i_mutex); | 
|  |  | 
|  | return (err < 0) ? -EIO : 0; | 
|  | } | 
|  |  | 
|  | int ocfs2_should_update_atime(struct inode *inode, | 
|  | struct vfsmount *vfsmnt) | 
|  | { | 
|  | struct timespec now; | 
|  | struct ocfs2_super *osb = OCFS2_SB(inode->i_sb); | 
|  |  | 
|  | if (ocfs2_is_hard_readonly(osb) || ocfs2_is_soft_readonly(osb)) | 
|  | return 0; | 
|  |  | 
|  | if ((inode->i_flags & S_NOATIME) || | 
|  | ((inode->i_sb->s_flags & MS_NODIRATIME) && S_ISDIR(inode->i_mode))) | 
|  | return 0; | 
|  |  | 
|  | /* | 
|  | * We can be called with no vfsmnt structure - NFSD will | 
|  | * sometimes do this. | 
|  | * | 
|  | * Note that our action here is different than touch_atime() - | 
|  | * if we can't tell whether this is a noatime mount, then we | 
|  | * don't know whether to trust the value of s_atime_quantum. | 
|  | */ | 
|  | if (vfsmnt == NULL) | 
|  | return 0; | 
|  |  | 
|  | if ((vfsmnt->mnt_flags & MNT_NOATIME) || | 
|  | ((vfsmnt->mnt_flags & MNT_NODIRATIME) && S_ISDIR(inode->i_mode))) | 
|  | return 0; | 
|  |  | 
|  | if (vfsmnt->mnt_flags & MNT_RELATIME) { | 
|  | if ((timespec_compare(&inode->i_atime, &inode->i_mtime) <= 0) || | 
|  | (timespec_compare(&inode->i_atime, &inode->i_ctime) <= 0)) | 
|  | return 1; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | now = CURRENT_TIME; | 
|  | if ((now.tv_sec - inode->i_atime.tv_sec <= osb->s_atime_quantum)) | 
|  | return 0; | 
|  | else | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | int ocfs2_update_inode_atime(struct inode *inode, | 
|  | struct buffer_head *bh) | 
|  | { | 
|  | int ret; | 
|  | struct ocfs2_super *osb = OCFS2_SB(inode->i_sb); | 
|  | handle_t *handle; | 
|  | struct ocfs2_dinode *di = (struct ocfs2_dinode *) bh->b_data; | 
|  |  | 
|  | handle = ocfs2_start_trans(osb, OCFS2_INODE_UPDATE_CREDITS); | 
|  | if (IS_ERR(handle)) { | 
|  | ret = PTR_ERR(handle); | 
|  | mlog_errno(ret); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | ret = ocfs2_journal_access_di(handle, INODE_CACHE(inode), bh, | 
|  | OCFS2_JOURNAL_ACCESS_WRITE); | 
|  | if (ret) { | 
|  | mlog_errno(ret); | 
|  | goto out_commit; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Don't use ocfs2_mark_inode_dirty() here as we don't always | 
|  | * have i_mutex to guard against concurrent changes to other | 
|  | * inode fields. | 
|  | */ | 
|  | inode->i_atime = CURRENT_TIME; | 
|  | di->i_atime = cpu_to_le64(inode->i_atime.tv_sec); | 
|  | di->i_atime_nsec = cpu_to_le32(inode->i_atime.tv_nsec); | 
|  | ocfs2_journal_dirty(handle, bh); | 
|  |  | 
|  | out_commit: | 
|  | ocfs2_commit_trans(OCFS2_SB(inode->i_sb), handle); | 
|  | out: | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int ocfs2_set_inode_size(handle_t *handle, | 
|  | struct inode *inode, | 
|  | struct buffer_head *fe_bh, | 
|  | u64 new_i_size) | 
|  | { | 
|  | int status; | 
|  |  | 
|  | i_size_write(inode, new_i_size); | 
|  | inode->i_blocks = ocfs2_inode_sector_count(inode); | 
|  | inode->i_ctime = inode->i_mtime = CURRENT_TIME; | 
|  |  | 
|  | status = ocfs2_mark_inode_dirty(handle, inode, fe_bh); | 
|  | if (status < 0) { | 
|  | mlog_errno(status); | 
|  | goto bail; | 
|  | } | 
|  |  | 
|  | bail: | 
|  | return status; | 
|  | } | 
|  |  | 
|  | int ocfs2_simple_size_update(struct inode *inode, | 
|  | struct buffer_head *di_bh, | 
|  | u64 new_i_size) | 
|  | { | 
|  | int ret; | 
|  | struct ocfs2_super *osb = OCFS2_SB(inode->i_sb); | 
|  | handle_t *handle = NULL; | 
|  |  | 
|  | handle = ocfs2_start_trans(osb, OCFS2_INODE_UPDATE_CREDITS); | 
|  | if (IS_ERR(handle)) { | 
|  | ret = PTR_ERR(handle); | 
|  | mlog_errno(ret); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | ret = ocfs2_set_inode_size(handle, inode, di_bh, | 
|  | new_i_size); | 
|  | if (ret < 0) | 
|  | mlog_errno(ret); | 
|  |  | 
|  | ocfs2_commit_trans(osb, handle); | 
|  | out: | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int ocfs2_cow_file_pos(struct inode *inode, | 
|  | struct buffer_head *fe_bh, | 
|  | u64 offset) | 
|  | { | 
|  | int status; | 
|  | u32 phys, cpos = offset >> OCFS2_SB(inode->i_sb)->s_clustersize_bits; | 
|  | unsigned int num_clusters = 0; | 
|  | unsigned int ext_flags = 0; | 
|  |  | 
|  | /* | 
|  | * If the new offset is aligned to the range of the cluster, there is | 
|  | * no space for ocfs2_zero_range_for_truncate to fill, so no need to | 
|  | * CoW either. | 
|  | */ | 
|  | if ((offset & (OCFS2_SB(inode->i_sb)->s_clustersize - 1)) == 0) | 
|  | return 0; | 
|  |  | 
|  | status = ocfs2_get_clusters(inode, cpos, &phys, | 
|  | &num_clusters, &ext_flags); | 
|  | if (status) { | 
|  | mlog_errno(status); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if (!(ext_flags & OCFS2_EXT_REFCOUNTED)) | 
|  | goto out; | 
|  |  | 
|  | return ocfs2_refcount_cow(inode, NULL, fe_bh, cpos, 1, cpos+1); | 
|  |  | 
|  | out: | 
|  | return status; | 
|  | } | 
|  |  | 
|  | static int ocfs2_orphan_for_truncate(struct ocfs2_super *osb, | 
|  | struct inode *inode, | 
|  | struct buffer_head *fe_bh, | 
|  | u64 new_i_size) | 
|  | { | 
|  | int status; | 
|  | handle_t *handle; | 
|  | struct ocfs2_dinode *di; | 
|  | u64 cluster_bytes; | 
|  |  | 
|  | /* | 
|  | * We need to CoW the cluster contains the offset if it is reflinked | 
|  | * since we will call ocfs2_zero_range_for_truncate later which will | 
|  | * write "0" from offset to the end of the cluster. | 
|  | */ | 
|  | status = ocfs2_cow_file_pos(inode, fe_bh, new_i_size); | 
|  | if (status) { | 
|  | mlog_errno(status); | 
|  | return status; | 
|  | } | 
|  |  | 
|  | /* TODO: This needs to actually orphan the inode in this | 
|  | * transaction. */ | 
|  |  | 
|  | handle = ocfs2_start_trans(osb, OCFS2_INODE_UPDATE_CREDITS); | 
|  | if (IS_ERR(handle)) { | 
|  | status = PTR_ERR(handle); | 
|  | mlog_errno(status); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | status = ocfs2_journal_access_di(handle, INODE_CACHE(inode), fe_bh, | 
|  | OCFS2_JOURNAL_ACCESS_WRITE); | 
|  | if (status < 0) { | 
|  | mlog_errno(status); | 
|  | goto out_commit; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Do this before setting i_size. | 
|  | */ | 
|  | cluster_bytes = ocfs2_align_bytes_to_clusters(inode->i_sb, new_i_size); | 
|  | status = ocfs2_zero_range_for_truncate(inode, handle, new_i_size, | 
|  | cluster_bytes); | 
|  | if (status) { | 
|  | mlog_errno(status); | 
|  | goto out_commit; | 
|  | } | 
|  |  | 
|  | i_size_write(inode, new_i_size); | 
|  | inode->i_ctime = inode->i_mtime = CURRENT_TIME; | 
|  |  | 
|  | di = (struct ocfs2_dinode *) fe_bh->b_data; | 
|  | di->i_size = cpu_to_le64(new_i_size); | 
|  | di->i_ctime = di->i_mtime = cpu_to_le64(inode->i_ctime.tv_sec); | 
|  | di->i_ctime_nsec = di->i_mtime_nsec = cpu_to_le32(inode->i_ctime.tv_nsec); | 
|  |  | 
|  | ocfs2_journal_dirty(handle, fe_bh); | 
|  |  | 
|  | out_commit: | 
|  | ocfs2_commit_trans(osb, handle); | 
|  | out: | 
|  | return status; | 
|  | } | 
|  |  | 
|  | static int ocfs2_truncate_file(struct inode *inode, | 
|  | struct buffer_head *di_bh, | 
|  | u64 new_i_size) | 
|  | { | 
|  | int status = 0; | 
|  | struct ocfs2_dinode *fe = NULL; | 
|  | struct ocfs2_super *osb = OCFS2_SB(inode->i_sb); | 
|  |  | 
|  | /* We trust di_bh because it comes from ocfs2_inode_lock(), which | 
|  | * already validated it */ | 
|  | fe = (struct ocfs2_dinode *) di_bh->b_data; | 
|  |  | 
|  | trace_ocfs2_truncate_file((unsigned long long)OCFS2_I(inode)->ip_blkno, | 
|  | (unsigned long long)le64_to_cpu(fe->i_size), | 
|  | (unsigned long long)new_i_size); | 
|  |  | 
|  | mlog_bug_on_msg(le64_to_cpu(fe->i_size) != i_size_read(inode), | 
|  | "Inode %llu, inode i_size = %lld != di " | 
|  | "i_size = %llu, i_flags = 0x%x\n", | 
|  | (unsigned long long)OCFS2_I(inode)->ip_blkno, | 
|  | i_size_read(inode), | 
|  | (unsigned long long)le64_to_cpu(fe->i_size), | 
|  | le32_to_cpu(fe->i_flags)); | 
|  |  | 
|  | if (new_i_size > le64_to_cpu(fe->i_size)) { | 
|  | trace_ocfs2_truncate_file_error( | 
|  | (unsigned long long)le64_to_cpu(fe->i_size), | 
|  | (unsigned long long)new_i_size); | 
|  | status = -EINVAL; | 
|  | mlog_errno(status); | 
|  | goto bail; | 
|  | } | 
|  |  | 
|  | /* lets handle the simple truncate cases before doing any more | 
|  | * cluster locking. */ | 
|  | if (new_i_size == le64_to_cpu(fe->i_size)) | 
|  | goto bail; | 
|  |  | 
|  | down_write(&OCFS2_I(inode)->ip_alloc_sem); | 
|  |  | 
|  | ocfs2_resv_discard(&osb->osb_la_resmap, | 
|  | &OCFS2_I(inode)->ip_la_data_resv); | 
|  |  | 
|  | /* | 
|  | * The inode lock forced other nodes to sync and drop their | 
|  | * pages, which (correctly) happens even if we have a truncate | 
|  | * without allocation change - ocfs2 cluster sizes can be much | 
|  | * greater than page size, so we have to truncate them | 
|  | * anyway. | 
|  | */ | 
|  | unmap_mapping_range(inode->i_mapping, new_i_size + PAGE_SIZE - 1, 0, 1); | 
|  | truncate_inode_pages(inode->i_mapping, new_i_size); | 
|  |  | 
|  | if (OCFS2_I(inode)->ip_dyn_features & OCFS2_INLINE_DATA_FL) { | 
|  | status = ocfs2_truncate_inline(inode, di_bh, new_i_size, | 
|  | i_size_read(inode), 1); | 
|  | if (status) | 
|  | mlog_errno(status); | 
|  |  | 
|  | goto bail_unlock_sem; | 
|  | } | 
|  |  | 
|  | /* alright, we're going to need to do a full blown alloc size | 
|  | * change. Orphan the inode so that recovery can complete the | 
|  | * truncate if necessary. This does the task of marking | 
|  | * i_size. */ | 
|  | status = ocfs2_orphan_for_truncate(osb, inode, di_bh, new_i_size); | 
|  | if (status < 0) { | 
|  | mlog_errno(status); | 
|  | goto bail_unlock_sem; | 
|  | } | 
|  |  | 
|  | status = ocfs2_commit_truncate(osb, inode, di_bh); | 
|  | if (status < 0) { | 
|  | mlog_errno(status); | 
|  | goto bail_unlock_sem; | 
|  | } | 
|  |  | 
|  | /* TODO: orphan dir cleanup here. */ | 
|  | bail_unlock_sem: | 
|  | up_write(&OCFS2_I(inode)->ip_alloc_sem); | 
|  |  | 
|  | bail: | 
|  | if (!status && OCFS2_I(inode)->ip_clusters == 0) | 
|  | status = ocfs2_try_remove_refcount_tree(inode, di_bh); | 
|  |  | 
|  | return status; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * extend file allocation only here. | 
|  | * we'll update all the disk stuff, and oip->alloc_size | 
|  | * | 
|  | * expect stuff to be locked, a transaction started and enough data / | 
|  | * metadata reservations in the contexts. | 
|  | * | 
|  | * Will return -EAGAIN, and a reason if a restart is needed. | 
|  | * If passed in, *reason will always be set, even in error. | 
|  | */ | 
|  | int ocfs2_add_inode_data(struct ocfs2_super *osb, | 
|  | struct inode *inode, | 
|  | u32 *logical_offset, | 
|  | u32 clusters_to_add, | 
|  | int mark_unwritten, | 
|  | struct buffer_head *fe_bh, | 
|  | handle_t *handle, | 
|  | struct ocfs2_alloc_context *data_ac, | 
|  | struct ocfs2_alloc_context *meta_ac, | 
|  | enum ocfs2_alloc_restarted *reason_ret) | 
|  | { | 
|  | int ret; | 
|  | struct ocfs2_extent_tree et; | 
|  |  | 
|  | ocfs2_init_dinode_extent_tree(&et, INODE_CACHE(inode), fe_bh); | 
|  | ret = ocfs2_add_clusters_in_btree(handle, &et, logical_offset, | 
|  | clusters_to_add, mark_unwritten, | 
|  | data_ac, meta_ac, reason_ret); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int __ocfs2_extend_allocation(struct inode *inode, u32 logical_start, | 
|  | u32 clusters_to_add, int mark_unwritten) | 
|  | { | 
|  | int status = 0; | 
|  | int restart_func = 0; | 
|  | int credits; | 
|  | u32 prev_clusters; | 
|  | struct buffer_head *bh = NULL; | 
|  | struct ocfs2_dinode *fe = NULL; | 
|  | handle_t *handle = NULL; | 
|  | struct ocfs2_alloc_context *data_ac = NULL; | 
|  | struct ocfs2_alloc_context *meta_ac = NULL; | 
|  | enum ocfs2_alloc_restarted why; | 
|  | struct ocfs2_super *osb = OCFS2_SB(inode->i_sb); | 
|  | struct ocfs2_extent_tree et; | 
|  | int did_quota = 0; | 
|  |  | 
|  | /* | 
|  | * This function only exists for file systems which don't | 
|  | * support holes. | 
|  | */ | 
|  | BUG_ON(mark_unwritten && !ocfs2_sparse_alloc(osb)); | 
|  |  | 
|  | status = ocfs2_read_inode_block(inode, &bh); | 
|  | if (status < 0) { | 
|  | mlog_errno(status); | 
|  | goto leave; | 
|  | } | 
|  | fe = (struct ocfs2_dinode *) bh->b_data; | 
|  |  | 
|  | restart_all: | 
|  | BUG_ON(le32_to_cpu(fe->i_clusters) != OCFS2_I(inode)->ip_clusters); | 
|  |  | 
|  | ocfs2_init_dinode_extent_tree(&et, INODE_CACHE(inode), bh); | 
|  | status = ocfs2_lock_allocators(inode, &et, clusters_to_add, 0, | 
|  | &data_ac, &meta_ac); | 
|  | if (status) { | 
|  | mlog_errno(status); | 
|  | goto leave; | 
|  | } | 
|  |  | 
|  | credits = ocfs2_calc_extend_credits(osb->sb, &fe->id2.i_list, | 
|  | clusters_to_add); | 
|  | handle = ocfs2_start_trans(osb, credits); | 
|  | if (IS_ERR(handle)) { | 
|  | status = PTR_ERR(handle); | 
|  | handle = NULL; | 
|  | mlog_errno(status); | 
|  | goto leave; | 
|  | } | 
|  |  | 
|  | restarted_transaction: | 
|  | trace_ocfs2_extend_allocation( | 
|  | (unsigned long long)OCFS2_I(inode)->ip_blkno, | 
|  | (unsigned long long)i_size_read(inode), | 
|  | le32_to_cpu(fe->i_clusters), clusters_to_add, | 
|  | why, restart_func); | 
|  |  | 
|  | status = dquot_alloc_space_nodirty(inode, | 
|  | ocfs2_clusters_to_bytes(osb->sb, clusters_to_add)); | 
|  | if (status) | 
|  | goto leave; | 
|  | did_quota = 1; | 
|  |  | 
|  | /* reserve a write to the file entry early on - that we if we | 
|  | * run out of credits in the allocation path, we can still | 
|  | * update i_size. */ | 
|  | status = ocfs2_journal_access_di(handle, INODE_CACHE(inode), bh, | 
|  | OCFS2_JOURNAL_ACCESS_WRITE); | 
|  | if (status < 0) { | 
|  | mlog_errno(status); | 
|  | goto leave; | 
|  | } | 
|  |  | 
|  | prev_clusters = OCFS2_I(inode)->ip_clusters; | 
|  |  | 
|  | status = ocfs2_add_inode_data(osb, | 
|  | inode, | 
|  | &logical_start, | 
|  | clusters_to_add, | 
|  | mark_unwritten, | 
|  | bh, | 
|  | handle, | 
|  | data_ac, | 
|  | meta_ac, | 
|  | &why); | 
|  | if ((status < 0) && (status != -EAGAIN)) { | 
|  | if (status != -ENOSPC) | 
|  | mlog_errno(status); | 
|  | goto leave; | 
|  | } | 
|  |  | 
|  | ocfs2_journal_dirty(handle, bh); | 
|  |  | 
|  | spin_lock(&OCFS2_I(inode)->ip_lock); | 
|  | clusters_to_add -= (OCFS2_I(inode)->ip_clusters - prev_clusters); | 
|  | spin_unlock(&OCFS2_I(inode)->ip_lock); | 
|  | /* Release unused quota reservation */ | 
|  | dquot_free_space(inode, | 
|  | ocfs2_clusters_to_bytes(osb->sb, clusters_to_add)); | 
|  | did_quota = 0; | 
|  |  | 
|  | if (why != RESTART_NONE && clusters_to_add) { | 
|  | if (why == RESTART_META) { | 
|  | restart_func = 1; | 
|  | status = 0; | 
|  | } else { | 
|  | BUG_ON(why != RESTART_TRANS); | 
|  |  | 
|  | /* TODO: This can be more intelligent. */ | 
|  | credits = ocfs2_calc_extend_credits(osb->sb, | 
|  | &fe->id2.i_list, | 
|  | clusters_to_add); | 
|  | status = ocfs2_extend_trans(handle, credits); | 
|  | if (status < 0) { | 
|  | /* handle still has to be committed at | 
|  | * this point. */ | 
|  | status = -ENOMEM; | 
|  | mlog_errno(status); | 
|  | goto leave; | 
|  | } | 
|  | goto restarted_transaction; | 
|  | } | 
|  | } | 
|  |  | 
|  | trace_ocfs2_extend_allocation_end(OCFS2_I(inode)->ip_blkno, | 
|  | le32_to_cpu(fe->i_clusters), | 
|  | (unsigned long long)le64_to_cpu(fe->i_size), | 
|  | OCFS2_I(inode)->ip_clusters, | 
|  | (unsigned long long)i_size_read(inode)); | 
|  |  | 
|  | leave: | 
|  | if (status < 0 && did_quota) | 
|  | dquot_free_space(inode, | 
|  | ocfs2_clusters_to_bytes(osb->sb, clusters_to_add)); | 
|  | if (handle) { | 
|  | ocfs2_commit_trans(osb, handle); | 
|  | handle = NULL; | 
|  | } | 
|  | if (data_ac) { | 
|  | ocfs2_free_alloc_context(data_ac); | 
|  | data_ac = NULL; | 
|  | } | 
|  | if (meta_ac) { | 
|  | ocfs2_free_alloc_context(meta_ac); | 
|  | meta_ac = NULL; | 
|  | } | 
|  | if ((!status) && restart_func) { | 
|  | restart_func = 0; | 
|  | goto restart_all; | 
|  | } | 
|  | brelse(bh); | 
|  | bh = NULL; | 
|  |  | 
|  | return status; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * While a write will already be ordering the data, a truncate will not. | 
|  | * Thus, we need to explicitly order the zeroed pages. | 
|  | */ | 
|  | static handle_t *ocfs2_zero_start_ordered_transaction(struct inode *inode) | 
|  | { | 
|  | struct ocfs2_super *osb = OCFS2_SB(inode->i_sb); | 
|  | handle_t *handle = NULL; | 
|  | int ret = 0; | 
|  |  | 
|  | if (!ocfs2_should_order_data(inode)) | 
|  | goto out; | 
|  |  | 
|  | handle = ocfs2_start_trans(osb, OCFS2_INODE_UPDATE_CREDITS); | 
|  | if (IS_ERR(handle)) { | 
|  | ret = -ENOMEM; | 
|  | mlog_errno(ret); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | ret = ocfs2_jbd2_file_inode(handle, inode); | 
|  | if (ret < 0) | 
|  | mlog_errno(ret); | 
|  |  | 
|  | out: | 
|  | if (ret) { | 
|  | if (!IS_ERR(handle)) | 
|  | ocfs2_commit_trans(osb, handle); | 
|  | handle = ERR_PTR(ret); | 
|  | } | 
|  | return handle; | 
|  | } | 
|  |  | 
|  | /* Some parts of this taken from generic_cont_expand, which turned out | 
|  | * to be too fragile to do exactly what we need without us having to | 
|  | * worry about recursive locking in ->write_begin() and ->write_end(). */ | 
|  | static int ocfs2_write_zero_page(struct inode *inode, u64 abs_from, | 
|  | u64 abs_to) | 
|  | { | 
|  | struct address_space *mapping = inode->i_mapping; | 
|  | struct page *page; | 
|  | unsigned long index = abs_from >> PAGE_CACHE_SHIFT; | 
|  | handle_t *handle = NULL; | 
|  | int ret = 0; | 
|  | unsigned zero_from, zero_to, block_start, block_end; | 
|  |  | 
|  | BUG_ON(abs_from >= abs_to); | 
|  | BUG_ON(abs_to > (((u64)index + 1) << PAGE_CACHE_SHIFT)); | 
|  | BUG_ON(abs_from & (inode->i_blkbits - 1)); | 
|  |  | 
|  | page = find_or_create_page(mapping, index, GFP_NOFS); | 
|  | if (!page) { | 
|  | ret = -ENOMEM; | 
|  | mlog_errno(ret); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | /* Get the offsets within the page that we want to zero */ | 
|  | zero_from = abs_from & (PAGE_CACHE_SIZE - 1); | 
|  | zero_to = abs_to & (PAGE_CACHE_SIZE - 1); | 
|  | if (!zero_to) | 
|  | zero_to = PAGE_CACHE_SIZE; | 
|  |  | 
|  | trace_ocfs2_write_zero_page( | 
|  | (unsigned long long)OCFS2_I(inode)->ip_blkno, | 
|  | (unsigned long long)abs_from, | 
|  | (unsigned long long)abs_to, | 
|  | index, zero_from, zero_to); | 
|  |  | 
|  | /* We know that zero_from is block aligned */ | 
|  | for (block_start = zero_from; block_start < zero_to; | 
|  | block_start = block_end) { | 
|  | block_end = block_start + (1 << inode->i_blkbits); | 
|  |  | 
|  | /* | 
|  | * block_start is block-aligned.  Bump it by one to force | 
|  | * __block_write_begin and block_commit_write to zero the | 
|  | * whole block. | 
|  | */ | 
|  | ret = __block_write_begin(page, block_start + 1, 0, | 
|  | ocfs2_get_block); | 
|  | if (ret < 0) { | 
|  | mlog_errno(ret); | 
|  | goto out_unlock; | 
|  | } | 
|  |  | 
|  | if (!handle) { | 
|  | handle = ocfs2_zero_start_ordered_transaction(inode); | 
|  | if (IS_ERR(handle)) { | 
|  | ret = PTR_ERR(handle); | 
|  | handle = NULL; | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* must not update i_size! */ | 
|  | ret = block_commit_write(page, block_start + 1, | 
|  | block_start + 1); | 
|  | if (ret < 0) | 
|  | mlog_errno(ret); | 
|  | else | 
|  | ret = 0; | 
|  | } | 
|  |  | 
|  | if (handle) | 
|  | ocfs2_commit_trans(OCFS2_SB(inode->i_sb), handle); | 
|  |  | 
|  | out_unlock: | 
|  | unlock_page(page); | 
|  | page_cache_release(page); | 
|  | out: | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Find the next range to zero.  We do this in terms of bytes because | 
|  | * that's what ocfs2_zero_extend() wants, and it is dealing with the | 
|  | * pagecache.  We may return multiple extents. | 
|  | * | 
|  | * zero_start and zero_end are ocfs2_zero_extend()s current idea of what | 
|  | * needs to be zeroed.  range_start and range_end return the next zeroing | 
|  | * range.  A subsequent call should pass the previous range_end as its | 
|  | * zero_start.  If range_end is 0, there's nothing to do. | 
|  | * | 
|  | * Unwritten extents are skipped over.  Refcounted extents are CoWd. | 
|  | */ | 
|  | static int ocfs2_zero_extend_get_range(struct inode *inode, | 
|  | struct buffer_head *di_bh, | 
|  | u64 zero_start, u64 zero_end, | 
|  | u64 *range_start, u64 *range_end) | 
|  | { | 
|  | int rc = 0, needs_cow = 0; | 
|  | u32 p_cpos, zero_clusters = 0; | 
|  | u32 zero_cpos = | 
|  | zero_start >> OCFS2_SB(inode->i_sb)->s_clustersize_bits; | 
|  | u32 last_cpos = ocfs2_clusters_for_bytes(inode->i_sb, zero_end); | 
|  | unsigned int num_clusters = 0; | 
|  | unsigned int ext_flags = 0; | 
|  |  | 
|  | while (zero_cpos < last_cpos) { | 
|  | rc = ocfs2_get_clusters(inode, zero_cpos, &p_cpos, | 
|  | &num_clusters, &ext_flags); | 
|  | if (rc) { | 
|  | mlog_errno(rc); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if (p_cpos && !(ext_flags & OCFS2_EXT_UNWRITTEN)) { | 
|  | zero_clusters = num_clusters; | 
|  | if (ext_flags & OCFS2_EXT_REFCOUNTED) | 
|  | needs_cow = 1; | 
|  | break; | 
|  | } | 
|  |  | 
|  | zero_cpos += num_clusters; | 
|  | } | 
|  | if (!zero_clusters) { | 
|  | *range_end = 0; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | while ((zero_cpos + zero_clusters) < last_cpos) { | 
|  | rc = ocfs2_get_clusters(inode, zero_cpos + zero_clusters, | 
|  | &p_cpos, &num_clusters, | 
|  | &ext_flags); | 
|  | if (rc) { | 
|  | mlog_errno(rc); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if (!p_cpos || (ext_flags & OCFS2_EXT_UNWRITTEN)) | 
|  | break; | 
|  | if (ext_flags & OCFS2_EXT_REFCOUNTED) | 
|  | needs_cow = 1; | 
|  | zero_clusters += num_clusters; | 
|  | } | 
|  | if ((zero_cpos + zero_clusters) > last_cpos) | 
|  | zero_clusters = last_cpos - zero_cpos; | 
|  |  | 
|  | if (needs_cow) { | 
|  | rc = ocfs2_refcount_cow(inode, NULL, di_bh, zero_cpos, | 
|  | zero_clusters, UINT_MAX); | 
|  | if (rc) { | 
|  | mlog_errno(rc); | 
|  | goto out; | 
|  | } | 
|  | } | 
|  |  | 
|  | *range_start = ocfs2_clusters_to_bytes(inode->i_sb, zero_cpos); | 
|  | *range_end = ocfs2_clusters_to_bytes(inode->i_sb, | 
|  | zero_cpos + zero_clusters); | 
|  |  | 
|  | out: | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Zero one range returned from ocfs2_zero_extend_get_range().  The caller | 
|  | * has made sure that the entire range needs zeroing. | 
|  | */ | 
|  | static int ocfs2_zero_extend_range(struct inode *inode, u64 range_start, | 
|  | u64 range_end) | 
|  | { | 
|  | int rc = 0; | 
|  | u64 next_pos; | 
|  | u64 zero_pos = range_start; | 
|  |  | 
|  | trace_ocfs2_zero_extend_range( | 
|  | (unsigned long long)OCFS2_I(inode)->ip_blkno, | 
|  | (unsigned long long)range_start, | 
|  | (unsigned long long)range_end); | 
|  | BUG_ON(range_start >= range_end); | 
|  |  | 
|  | while (zero_pos < range_end) { | 
|  | next_pos = (zero_pos & PAGE_CACHE_MASK) + PAGE_CACHE_SIZE; | 
|  | if (next_pos > range_end) | 
|  | next_pos = range_end; | 
|  | rc = ocfs2_write_zero_page(inode, zero_pos, next_pos); | 
|  | if (rc < 0) { | 
|  | mlog_errno(rc); | 
|  | break; | 
|  | } | 
|  | zero_pos = next_pos; | 
|  |  | 
|  | /* | 
|  | * Very large extends have the potential to lock up | 
|  | * the cpu for extended periods of time. | 
|  | */ | 
|  | cond_resched(); | 
|  | } | 
|  |  | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | int ocfs2_zero_extend(struct inode *inode, struct buffer_head *di_bh, | 
|  | loff_t zero_to_size) | 
|  | { | 
|  | int ret = 0; | 
|  | u64 zero_start, range_start = 0, range_end = 0; | 
|  | struct super_block *sb = inode->i_sb; | 
|  |  | 
|  | zero_start = ocfs2_align_bytes_to_blocks(sb, i_size_read(inode)); | 
|  | trace_ocfs2_zero_extend((unsigned long long)OCFS2_I(inode)->ip_blkno, | 
|  | (unsigned long long)zero_start, | 
|  | (unsigned long long)i_size_read(inode)); | 
|  | while (zero_start < zero_to_size) { | 
|  | ret = ocfs2_zero_extend_get_range(inode, di_bh, zero_start, | 
|  | zero_to_size, | 
|  | &range_start, | 
|  | &range_end); | 
|  | if (ret) { | 
|  | mlog_errno(ret); | 
|  | break; | 
|  | } | 
|  | if (!range_end) | 
|  | break; | 
|  | /* Trim the ends */ | 
|  | if (range_start < zero_start) | 
|  | range_start = zero_start; | 
|  | if (range_end > zero_to_size) | 
|  | range_end = zero_to_size; | 
|  |  | 
|  | ret = ocfs2_zero_extend_range(inode, range_start, | 
|  | range_end); | 
|  | if (ret) { | 
|  | mlog_errno(ret); | 
|  | break; | 
|  | } | 
|  | zero_start = range_end; | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | int ocfs2_extend_no_holes(struct inode *inode, struct buffer_head *di_bh, | 
|  | u64 new_i_size, u64 zero_to) | 
|  | { | 
|  | int ret; | 
|  | u32 clusters_to_add; | 
|  | struct ocfs2_inode_info *oi = OCFS2_I(inode); | 
|  |  | 
|  | /* | 
|  | * Only quota files call this without a bh, and they can't be | 
|  | * refcounted. | 
|  | */ | 
|  | BUG_ON(!di_bh && (oi->ip_dyn_features & OCFS2_HAS_REFCOUNT_FL)); | 
|  | BUG_ON(!di_bh && !(oi->ip_flags & OCFS2_INODE_SYSTEM_FILE)); | 
|  |  | 
|  | clusters_to_add = ocfs2_clusters_for_bytes(inode->i_sb, new_i_size); | 
|  | if (clusters_to_add < oi->ip_clusters) | 
|  | clusters_to_add = 0; | 
|  | else | 
|  | clusters_to_add -= oi->ip_clusters; | 
|  |  | 
|  | if (clusters_to_add) { | 
|  | ret = __ocfs2_extend_allocation(inode, oi->ip_clusters, | 
|  | clusters_to_add, 0); | 
|  | if (ret) { | 
|  | mlog_errno(ret); | 
|  | goto out; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Call this even if we don't add any clusters to the tree. We | 
|  | * still need to zero the area between the old i_size and the | 
|  | * new i_size. | 
|  | */ | 
|  | ret = ocfs2_zero_extend(inode, di_bh, zero_to); | 
|  | if (ret < 0) | 
|  | mlog_errno(ret); | 
|  |  | 
|  | out: | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int ocfs2_extend_file(struct inode *inode, | 
|  | struct buffer_head *di_bh, | 
|  | u64 new_i_size) | 
|  | { | 
|  | int ret = 0; | 
|  | struct ocfs2_inode_info *oi = OCFS2_I(inode); | 
|  |  | 
|  | BUG_ON(!di_bh); | 
|  |  | 
|  | /* setattr sometimes calls us like this. */ | 
|  | if (new_i_size == 0) | 
|  | goto out; | 
|  |  | 
|  | if (i_size_read(inode) == new_i_size) | 
|  | goto out; | 
|  | BUG_ON(new_i_size < i_size_read(inode)); | 
|  |  | 
|  | /* | 
|  | * The alloc sem blocks people in read/write from reading our | 
|  | * allocation until we're done changing it. We depend on | 
|  | * i_mutex to block other extend/truncate calls while we're | 
|  | * here.  We even have to hold it for sparse files because there | 
|  | * might be some tail zeroing. | 
|  | */ | 
|  | down_write(&oi->ip_alloc_sem); | 
|  |  | 
|  | if (oi->ip_dyn_features & OCFS2_INLINE_DATA_FL) { | 
|  | /* | 
|  | * We can optimize small extends by keeping the inodes | 
|  | * inline data. | 
|  | */ | 
|  | if (ocfs2_size_fits_inline_data(di_bh, new_i_size)) { | 
|  | up_write(&oi->ip_alloc_sem); | 
|  | goto out_update_size; | 
|  | } | 
|  |  | 
|  | ret = ocfs2_convert_inline_data_to_extents(inode, di_bh); | 
|  | if (ret) { | 
|  | up_write(&oi->ip_alloc_sem); | 
|  | mlog_errno(ret); | 
|  | goto out; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (ocfs2_sparse_alloc(OCFS2_SB(inode->i_sb))) | 
|  | ret = ocfs2_zero_extend(inode, di_bh, new_i_size); | 
|  | else | 
|  | ret = ocfs2_extend_no_holes(inode, di_bh, new_i_size, | 
|  | new_i_size); | 
|  |  | 
|  | up_write(&oi->ip_alloc_sem); | 
|  |  | 
|  | if (ret < 0) { | 
|  | mlog_errno(ret); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | out_update_size: | 
|  | ret = ocfs2_simple_size_update(inode, di_bh, new_i_size); | 
|  | if (ret < 0) | 
|  | mlog_errno(ret); | 
|  |  | 
|  | out: | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | int ocfs2_setattr(struct dentry *dentry, struct iattr *attr) | 
|  | { | 
|  | int status = 0, size_change; | 
|  | struct inode *inode = dentry->d_inode; | 
|  | struct super_block *sb = inode->i_sb; | 
|  | struct ocfs2_super *osb = OCFS2_SB(sb); | 
|  | struct buffer_head *bh = NULL; | 
|  | handle_t *handle = NULL; | 
|  | struct dquot *transfer_to[MAXQUOTAS] = { }; | 
|  | int qtype; | 
|  |  | 
|  | trace_ocfs2_setattr(inode, dentry, | 
|  | (unsigned long long)OCFS2_I(inode)->ip_blkno, | 
|  | dentry->d_name.len, dentry->d_name.name, | 
|  | attr->ia_valid, attr->ia_mode, | 
|  | attr->ia_uid, attr->ia_gid); | 
|  |  | 
|  | /* ensuring we don't even attempt to truncate a symlink */ | 
|  | if (S_ISLNK(inode->i_mode)) | 
|  | attr->ia_valid &= ~ATTR_SIZE; | 
|  |  | 
|  | #define OCFS2_VALID_ATTRS (ATTR_ATIME | ATTR_MTIME | ATTR_CTIME | ATTR_SIZE \ | 
|  | | ATTR_GID | ATTR_UID | ATTR_MODE) | 
|  | if (!(attr->ia_valid & OCFS2_VALID_ATTRS)) | 
|  | return 0; | 
|  |  | 
|  | status = inode_change_ok(inode, attr); | 
|  | if (status) | 
|  | return status; | 
|  |  | 
|  | if (is_quota_modification(inode, attr)) | 
|  | dquot_initialize(inode); | 
|  | size_change = S_ISREG(inode->i_mode) && attr->ia_valid & ATTR_SIZE; | 
|  | if (size_change) { | 
|  | status = ocfs2_rw_lock(inode, 1); | 
|  | if (status < 0) { | 
|  | mlog_errno(status); | 
|  | goto bail; | 
|  | } | 
|  | } | 
|  |  | 
|  | status = ocfs2_inode_lock(inode, &bh, 1); | 
|  | if (status < 0) { | 
|  | if (status != -ENOENT) | 
|  | mlog_errno(status); | 
|  | goto bail_unlock_rw; | 
|  | } | 
|  |  | 
|  | if (size_change && attr->ia_size != i_size_read(inode)) { | 
|  | status = inode_newsize_ok(inode, attr->ia_size); | 
|  | if (status) | 
|  | goto bail_unlock; | 
|  |  | 
|  | inode_dio_wait(inode); | 
|  |  | 
|  | if (i_size_read(inode) > attr->ia_size) { | 
|  | if (ocfs2_should_order_data(inode)) { | 
|  | status = ocfs2_begin_ordered_truncate(inode, | 
|  | attr->ia_size); | 
|  | if (status) | 
|  | goto bail_unlock; | 
|  | } | 
|  | status = ocfs2_truncate_file(inode, bh, attr->ia_size); | 
|  | } else | 
|  | status = ocfs2_extend_file(inode, bh, attr->ia_size); | 
|  | if (status < 0) { | 
|  | if (status != -ENOSPC) | 
|  | mlog_errno(status); | 
|  | status = -ENOSPC; | 
|  | goto bail_unlock; | 
|  | } | 
|  | } | 
|  |  | 
|  | if ((attr->ia_valid & ATTR_UID && attr->ia_uid != inode->i_uid) || | 
|  | (attr->ia_valid & ATTR_GID && attr->ia_gid != inode->i_gid)) { | 
|  | /* | 
|  | * Gather pointers to quota structures so that allocation / | 
|  | * freeing of quota structures happens here and not inside | 
|  | * dquot_transfer() where we have problems with lock ordering | 
|  | */ | 
|  | if (attr->ia_valid & ATTR_UID && attr->ia_uid != inode->i_uid | 
|  | && OCFS2_HAS_RO_COMPAT_FEATURE(sb, | 
|  | OCFS2_FEATURE_RO_COMPAT_USRQUOTA)) { | 
|  | transfer_to[USRQUOTA] = dqget(sb, attr->ia_uid, | 
|  | USRQUOTA); | 
|  | if (!transfer_to[USRQUOTA]) { | 
|  | status = -ESRCH; | 
|  | goto bail_unlock; | 
|  | } | 
|  | } | 
|  | if (attr->ia_valid & ATTR_GID && attr->ia_gid != inode->i_gid | 
|  | && OCFS2_HAS_RO_COMPAT_FEATURE(sb, | 
|  | OCFS2_FEATURE_RO_COMPAT_GRPQUOTA)) { | 
|  | transfer_to[GRPQUOTA] = dqget(sb, attr->ia_gid, | 
|  | GRPQUOTA); | 
|  | if (!transfer_to[GRPQUOTA]) { | 
|  | status = -ESRCH; | 
|  | goto bail_unlock; | 
|  | } | 
|  | } | 
|  | handle = ocfs2_start_trans(osb, OCFS2_INODE_UPDATE_CREDITS + | 
|  | 2 * ocfs2_quota_trans_credits(sb)); | 
|  | if (IS_ERR(handle)) { | 
|  | status = PTR_ERR(handle); | 
|  | mlog_errno(status); | 
|  | goto bail_unlock; | 
|  | } | 
|  | status = __dquot_transfer(inode, transfer_to); | 
|  | if (status < 0) | 
|  | goto bail_commit; | 
|  | } else { | 
|  | handle = ocfs2_start_trans(osb, OCFS2_INODE_UPDATE_CREDITS); | 
|  | if (IS_ERR(handle)) { | 
|  | status = PTR_ERR(handle); | 
|  | mlog_errno(status); | 
|  | goto bail_unlock; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * This will intentionally not wind up calling truncate_setsize(), | 
|  | * since all the work for a size change has been done above. | 
|  | * Otherwise, we could get into problems with truncate as | 
|  | * ip_alloc_sem is used there to protect against i_size | 
|  | * changes. | 
|  | * | 
|  | * XXX: this means the conditional below can probably be removed. | 
|  | */ | 
|  | if ((attr->ia_valid & ATTR_SIZE) && | 
|  | attr->ia_size != i_size_read(inode)) { | 
|  | status = vmtruncate(inode, attr->ia_size); | 
|  | if (status) { | 
|  | mlog_errno(status); | 
|  | goto bail_commit; | 
|  | } | 
|  | } | 
|  |  | 
|  | setattr_copy(inode, attr); | 
|  | mark_inode_dirty(inode); | 
|  |  | 
|  | status = ocfs2_mark_inode_dirty(handle, inode, bh); | 
|  | if (status < 0) | 
|  | mlog_errno(status); | 
|  |  | 
|  | bail_commit: | 
|  | ocfs2_commit_trans(osb, handle); | 
|  | bail_unlock: | 
|  | ocfs2_inode_unlock(inode, 1); | 
|  | bail_unlock_rw: | 
|  | if (size_change) | 
|  | ocfs2_rw_unlock(inode, 1); | 
|  | bail: | 
|  | brelse(bh); | 
|  |  | 
|  | /* Release quota pointers in case we acquired them */ | 
|  | for (qtype = 0; qtype < MAXQUOTAS; qtype++) | 
|  | dqput(transfer_to[qtype]); | 
|  |  | 
|  | if (!status && attr->ia_valid & ATTR_MODE) { | 
|  | status = ocfs2_acl_chmod(inode); | 
|  | if (status < 0) | 
|  | mlog_errno(status); | 
|  | } | 
|  |  | 
|  | return status; | 
|  | } | 
|  |  | 
|  | int ocfs2_getattr(struct vfsmount *mnt, | 
|  | struct dentry *dentry, | 
|  | struct kstat *stat) | 
|  | { | 
|  | struct inode *inode = dentry->d_inode; | 
|  | struct super_block *sb = dentry->d_inode->i_sb; | 
|  | struct ocfs2_super *osb = sb->s_fs_info; | 
|  | int err; | 
|  |  | 
|  | err = ocfs2_inode_revalidate(dentry); | 
|  | if (err) { | 
|  | if (err != -ENOENT) | 
|  | mlog_errno(err); | 
|  | goto bail; | 
|  | } | 
|  |  | 
|  | generic_fillattr(inode, stat); | 
|  |  | 
|  | /* We set the blksize from the cluster size for performance */ | 
|  | stat->blksize = osb->s_clustersize; | 
|  |  | 
|  | bail: | 
|  | return err; | 
|  | } | 
|  |  | 
|  | int ocfs2_permission(struct inode *inode, int mask) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | if (mask & MAY_NOT_BLOCK) | 
|  | return -ECHILD; | 
|  |  | 
|  | ret = ocfs2_inode_lock(inode, NULL, 0); | 
|  | if (ret) { | 
|  | if (ret != -ENOENT) | 
|  | mlog_errno(ret); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | ret = generic_permission(inode, mask); | 
|  |  | 
|  | ocfs2_inode_unlock(inode, 0); | 
|  | out: | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int __ocfs2_write_remove_suid(struct inode *inode, | 
|  | struct buffer_head *bh) | 
|  | { | 
|  | int ret; | 
|  | handle_t *handle; | 
|  | struct ocfs2_super *osb = OCFS2_SB(inode->i_sb); | 
|  | struct ocfs2_dinode *di; | 
|  |  | 
|  | trace_ocfs2_write_remove_suid( | 
|  | (unsigned long long)OCFS2_I(inode)->ip_blkno, | 
|  | inode->i_mode); | 
|  |  | 
|  | handle = ocfs2_start_trans(osb, OCFS2_INODE_UPDATE_CREDITS); | 
|  | if (IS_ERR(handle)) { | 
|  | ret = PTR_ERR(handle); | 
|  | mlog_errno(ret); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | ret = ocfs2_journal_access_di(handle, INODE_CACHE(inode), bh, | 
|  | OCFS2_JOURNAL_ACCESS_WRITE); | 
|  | if (ret < 0) { | 
|  | mlog_errno(ret); | 
|  | goto out_trans; | 
|  | } | 
|  |  | 
|  | inode->i_mode &= ~S_ISUID; | 
|  | if ((inode->i_mode & S_ISGID) && (inode->i_mode & S_IXGRP)) | 
|  | inode->i_mode &= ~S_ISGID; | 
|  |  | 
|  | di = (struct ocfs2_dinode *) bh->b_data; | 
|  | di->i_mode = cpu_to_le16(inode->i_mode); | 
|  |  | 
|  | ocfs2_journal_dirty(handle, bh); | 
|  |  | 
|  | out_trans: | 
|  | ocfs2_commit_trans(osb, handle); | 
|  | out: | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Will look for holes and unwritten extents in the range starting at | 
|  | * pos for count bytes (inclusive). | 
|  | */ | 
|  | static int ocfs2_check_range_for_holes(struct inode *inode, loff_t pos, | 
|  | size_t count) | 
|  | { | 
|  | int ret = 0; | 
|  | unsigned int extent_flags; | 
|  | u32 cpos, clusters, extent_len, phys_cpos; | 
|  | struct super_block *sb = inode->i_sb; | 
|  |  | 
|  | cpos = pos >> OCFS2_SB(sb)->s_clustersize_bits; | 
|  | clusters = ocfs2_clusters_for_bytes(sb, pos + count) - cpos; | 
|  |  | 
|  | while (clusters) { | 
|  | ret = ocfs2_get_clusters(inode, cpos, &phys_cpos, &extent_len, | 
|  | &extent_flags); | 
|  | if (ret < 0) { | 
|  | mlog_errno(ret); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if (phys_cpos == 0 || (extent_flags & OCFS2_EXT_UNWRITTEN)) { | 
|  | ret = 1; | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (extent_len > clusters) | 
|  | extent_len = clusters; | 
|  |  | 
|  | clusters -= extent_len; | 
|  | cpos += extent_len; | 
|  | } | 
|  | out: | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int ocfs2_write_remove_suid(struct inode *inode) | 
|  | { | 
|  | int ret; | 
|  | struct buffer_head *bh = NULL; | 
|  |  | 
|  | ret = ocfs2_read_inode_block(inode, &bh); | 
|  | if (ret < 0) { | 
|  | mlog_errno(ret); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | ret =  __ocfs2_write_remove_suid(inode, bh); | 
|  | out: | 
|  | brelse(bh); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Allocate enough extents to cover the region starting at byte offset | 
|  | * start for len bytes. Existing extents are skipped, any extents | 
|  | * added are marked as "unwritten". | 
|  | */ | 
|  | static int ocfs2_allocate_unwritten_extents(struct inode *inode, | 
|  | u64 start, u64 len) | 
|  | { | 
|  | int ret; | 
|  | u32 cpos, phys_cpos, clusters, alloc_size; | 
|  | u64 end = start + len; | 
|  | struct buffer_head *di_bh = NULL; | 
|  |  | 
|  | if (OCFS2_I(inode)->ip_dyn_features & OCFS2_INLINE_DATA_FL) { | 
|  | ret = ocfs2_read_inode_block(inode, &di_bh); | 
|  | if (ret) { | 
|  | mlog_errno(ret); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Nothing to do if the requested reservation range | 
|  | * fits within the inode. | 
|  | */ | 
|  | if (ocfs2_size_fits_inline_data(di_bh, end)) | 
|  | goto out; | 
|  |  | 
|  | ret = ocfs2_convert_inline_data_to_extents(inode, di_bh); | 
|  | if (ret) { | 
|  | mlog_errno(ret); | 
|  | goto out; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * We consider both start and len to be inclusive. | 
|  | */ | 
|  | cpos = start >> OCFS2_SB(inode->i_sb)->s_clustersize_bits; | 
|  | clusters = ocfs2_clusters_for_bytes(inode->i_sb, start + len); | 
|  | clusters -= cpos; | 
|  |  | 
|  | while (clusters) { | 
|  | ret = ocfs2_get_clusters(inode, cpos, &phys_cpos, | 
|  | &alloc_size, NULL); | 
|  | if (ret) { | 
|  | mlog_errno(ret); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Hole or existing extent len can be arbitrary, so | 
|  | * cap it to our own allocation request. | 
|  | */ | 
|  | if (alloc_size > clusters) | 
|  | alloc_size = clusters; | 
|  |  | 
|  | if (phys_cpos) { | 
|  | /* | 
|  | * We already have an allocation at this | 
|  | * region so we can safely skip it. | 
|  | */ | 
|  | goto next; | 
|  | } | 
|  |  | 
|  | ret = __ocfs2_extend_allocation(inode, cpos, alloc_size, 1); | 
|  | if (ret) { | 
|  | if (ret != -ENOSPC) | 
|  | mlog_errno(ret); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | next: | 
|  | cpos += alloc_size; | 
|  | clusters -= alloc_size; | 
|  | } | 
|  |  | 
|  | ret = 0; | 
|  | out: | 
|  |  | 
|  | brelse(di_bh); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Truncate a byte range, avoiding pages within partial clusters. This | 
|  | * preserves those pages for the zeroing code to write to. | 
|  | */ | 
|  | static void ocfs2_truncate_cluster_pages(struct inode *inode, u64 byte_start, | 
|  | u64 byte_len) | 
|  | { | 
|  | struct ocfs2_super *osb = OCFS2_SB(inode->i_sb); | 
|  | loff_t start, end; | 
|  | struct address_space *mapping = inode->i_mapping; | 
|  |  | 
|  | start = (loff_t)ocfs2_align_bytes_to_clusters(inode->i_sb, byte_start); | 
|  | end = byte_start + byte_len; | 
|  | end = end & ~(osb->s_clustersize - 1); | 
|  |  | 
|  | if (start < end) { | 
|  | unmap_mapping_range(mapping, start, end - start, 0); | 
|  | truncate_inode_pages_range(mapping, start, end - 1); | 
|  | } | 
|  | } | 
|  |  | 
|  | static int ocfs2_zero_partial_clusters(struct inode *inode, | 
|  | u64 start, u64 len) | 
|  | { | 
|  | int ret = 0; | 
|  | u64 tmpend, end = start + len; | 
|  | struct ocfs2_super *osb = OCFS2_SB(inode->i_sb); | 
|  | unsigned int csize = osb->s_clustersize; | 
|  | handle_t *handle; | 
|  |  | 
|  | /* | 
|  | * The "start" and "end" values are NOT necessarily part of | 
|  | * the range whose allocation is being deleted. Rather, this | 
|  | * is what the user passed in with the request. We must zero | 
|  | * partial clusters here. There's no need to worry about | 
|  | * physical allocation - the zeroing code knows to skip holes. | 
|  | */ | 
|  | trace_ocfs2_zero_partial_clusters( | 
|  | (unsigned long long)OCFS2_I(inode)->ip_blkno, | 
|  | (unsigned long long)start, (unsigned long long)end); | 
|  |  | 
|  | /* | 
|  | * If both edges are on a cluster boundary then there's no | 
|  | * zeroing required as the region is part of the allocation to | 
|  | * be truncated. | 
|  | */ | 
|  | if ((start & (csize - 1)) == 0 && (end & (csize - 1)) == 0) | 
|  | goto out; | 
|  |  | 
|  | handle = ocfs2_start_trans(osb, OCFS2_INODE_UPDATE_CREDITS); | 
|  | if (IS_ERR(handle)) { | 
|  | ret = PTR_ERR(handle); | 
|  | mlog_errno(ret); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * We want to get the byte offset of the end of the 1st cluster. | 
|  | */ | 
|  | tmpend = (u64)osb->s_clustersize + (start & ~(osb->s_clustersize - 1)); | 
|  | if (tmpend > end) | 
|  | tmpend = end; | 
|  |  | 
|  | trace_ocfs2_zero_partial_clusters_range1((unsigned long long)start, | 
|  | (unsigned long long)tmpend); | 
|  |  | 
|  | ret = ocfs2_zero_range_for_truncate(inode, handle, start, tmpend); | 
|  | if (ret) | 
|  | mlog_errno(ret); | 
|  |  | 
|  | if (tmpend < end) { | 
|  | /* | 
|  | * This may make start and end equal, but the zeroing | 
|  | * code will skip any work in that case so there's no | 
|  | * need to catch it up here. | 
|  | */ | 
|  | start = end & ~(osb->s_clustersize - 1); | 
|  |  | 
|  | trace_ocfs2_zero_partial_clusters_range2( | 
|  | (unsigned long long)start, (unsigned long long)end); | 
|  |  | 
|  | ret = ocfs2_zero_range_for_truncate(inode, handle, start, end); | 
|  | if (ret) | 
|  | mlog_errno(ret); | 
|  | } | 
|  |  | 
|  | ocfs2_commit_trans(osb, handle); | 
|  | out: | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int ocfs2_find_rec(struct ocfs2_extent_list *el, u32 pos) | 
|  | { | 
|  | int i; | 
|  | struct ocfs2_extent_rec *rec = NULL; | 
|  |  | 
|  | for (i = le16_to_cpu(el->l_next_free_rec) - 1; i >= 0; i--) { | 
|  |  | 
|  | rec = &el->l_recs[i]; | 
|  |  | 
|  | if (le32_to_cpu(rec->e_cpos) < pos) | 
|  | break; | 
|  | } | 
|  |  | 
|  | return i; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Helper to calculate the punching pos and length in one run, we handle the | 
|  | * following three cases in order: | 
|  | * | 
|  | * - remove the entire record | 
|  | * - remove a partial record | 
|  | * - no record needs to be removed (hole-punching completed) | 
|  | */ | 
|  | static void ocfs2_calc_trunc_pos(struct inode *inode, | 
|  | struct ocfs2_extent_list *el, | 
|  | struct ocfs2_extent_rec *rec, | 
|  | u32 trunc_start, u32 *trunc_cpos, | 
|  | u32 *trunc_len, u32 *trunc_end, | 
|  | u64 *blkno, int *done) | 
|  | { | 
|  | int ret = 0; | 
|  | u32 coff, range; | 
|  |  | 
|  | range = le32_to_cpu(rec->e_cpos) + ocfs2_rec_clusters(el, rec); | 
|  |  | 
|  | if (le32_to_cpu(rec->e_cpos) >= trunc_start) { | 
|  | /* | 
|  | * remove an entire extent record. | 
|  | */ | 
|  | *trunc_cpos = le32_to_cpu(rec->e_cpos); | 
|  | /* | 
|  | * Skip holes if any. | 
|  | */ | 
|  | if (range < *trunc_end) | 
|  | *trunc_end = range; | 
|  | *trunc_len = *trunc_end - le32_to_cpu(rec->e_cpos); | 
|  | *blkno = le64_to_cpu(rec->e_blkno); | 
|  | *trunc_end = le32_to_cpu(rec->e_cpos); | 
|  | } else if (range > trunc_start) { | 
|  | /* | 
|  | * remove a partial extent record, which means we're | 
|  | * removing the last extent record. | 
|  | */ | 
|  | *trunc_cpos = trunc_start; | 
|  | /* | 
|  | * skip hole if any. | 
|  | */ | 
|  | if (range < *trunc_end) | 
|  | *trunc_end = range; | 
|  | *trunc_len = *trunc_end - trunc_start; | 
|  | coff = trunc_start - le32_to_cpu(rec->e_cpos); | 
|  | *blkno = le64_to_cpu(rec->e_blkno) + | 
|  | ocfs2_clusters_to_blocks(inode->i_sb, coff); | 
|  | *trunc_end = trunc_start; | 
|  | } else { | 
|  | /* | 
|  | * It may have two following possibilities: | 
|  | * | 
|  | * - last record has been removed | 
|  | * - trunc_start was within a hole | 
|  | * | 
|  | * both two cases mean the completion of hole punching. | 
|  | */ | 
|  | ret = 1; | 
|  | } | 
|  |  | 
|  | *done = ret; | 
|  | } | 
|  |  | 
|  | static int ocfs2_remove_inode_range(struct inode *inode, | 
|  | struct buffer_head *di_bh, u64 byte_start, | 
|  | u64 byte_len) | 
|  | { | 
|  | int ret = 0, flags = 0, done = 0, i; | 
|  | u32 trunc_start, trunc_len, trunc_end, trunc_cpos, phys_cpos; | 
|  | u32 cluster_in_el; | 
|  | struct ocfs2_super *osb = OCFS2_SB(inode->i_sb); | 
|  | struct ocfs2_cached_dealloc_ctxt dealloc; | 
|  | struct address_space *mapping = inode->i_mapping; | 
|  | struct ocfs2_extent_tree et; | 
|  | struct ocfs2_path *path = NULL; | 
|  | struct ocfs2_extent_list *el = NULL; | 
|  | struct ocfs2_extent_rec *rec = NULL; | 
|  | struct ocfs2_dinode *di = (struct ocfs2_dinode *)di_bh->b_data; | 
|  | u64 blkno, refcount_loc = le64_to_cpu(di->i_refcount_loc); | 
|  |  | 
|  | ocfs2_init_dinode_extent_tree(&et, INODE_CACHE(inode), di_bh); | 
|  | ocfs2_init_dealloc_ctxt(&dealloc); | 
|  |  | 
|  | trace_ocfs2_remove_inode_range( | 
|  | (unsigned long long)OCFS2_I(inode)->ip_blkno, | 
|  | (unsigned long long)byte_start, | 
|  | (unsigned long long)byte_len); | 
|  |  | 
|  | if (byte_len == 0) | 
|  | return 0; | 
|  |  | 
|  | if (OCFS2_I(inode)->ip_dyn_features & OCFS2_INLINE_DATA_FL) { | 
|  | ret = ocfs2_truncate_inline(inode, di_bh, byte_start, | 
|  | byte_start + byte_len, 0); | 
|  | if (ret) { | 
|  | mlog_errno(ret); | 
|  | goto out; | 
|  | } | 
|  | /* | 
|  | * There's no need to get fancy with the page cache | 
|  | * truncate of an inline-data inode. We're talking | 
|  | * about less than a page here, which will be cached | 
|  | * in the dinode buffer anyway. | 
|  | */ | 
|  | unmap_mapping_range(mapping, 0, 0, 0); | 
|  | truncate_inode_pages(mapping, 0); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * For reflinks, we may need to CoW 2 clusters which might be | 
|  | * partially zero'd later, if hole's start and end offset were | 
|  | * within one cluster(means is not exactly aligned to clustersize). | 
|  | */ | 
|  |  | 
|  | if (OCFS2_I(inode)->ip_dyn_features & OCFS2_HAS_REFCOUNT_FL) { | 
|  |  | 
|  | ret = ocfs2_cow_file_pos(inode, di_bh, byte_start); | 
|  | if (ret) { | 
|  | mlog_errno(ret); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | ret = ocfs2_cow_file_pos(inode, di_bh, byte_start + byte_len); | 
|  | if (ret) { | 
|  | mlog_errno(ret); | 
|  | goto out; | 
|  | } | 
|  | } | 
|  |  | 
|  | trunc_start = ocfs2_clusters_for_bytes(osb->sb, byte_start); | 
|  | trunc_end = (byte_start + byte_len) >> osb->s_clustersize_bits; | 
|  | cluster_in_el = trunc_end; | 
|  |  | 
|  | ret = ocfs2_zero_partial_clusters(inode, byte_start, byte_len); | 
|  | if (ret) { | 
|  | mlog_errno(ret); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | path = ocfs2_new_path_from_et(&et); | 
|  | if (!path) { | 
|  | ret = -ENOMEM; | 
|  | mlog_errno(ret); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | while (trunc_end > trunc_start) { | 
|  |  | 
|  | ret = ocfs2_find_path(INODE_CACHE(inode), path, | 
|  | cluster_in_el); | 
|  | if (ret) { | 
|  | mlog_errno(ret); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | el = path_leaf_el(path); | 
|  |  | 
|  | i = ocfs2_find_rec(el, trunc_end); | 
|  | /* | 
|  | * Need to go to previous extent block. | 
|  | */ | 
|  | if (i < 0) { | 
|  | if (path->p_tree_depth == 0) | 
|  | break; | 
|  |  | 
|  | ret = ocfs2_find_cpos_for_left_leaf(inode->i_sb, | 
|  | path, | 
|  | &cluster_in_el); | 
|  | if (ret) { | 
|  | mlog_errno(ret); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * We've reached the leftmost extent block, | 
|  | * it's safe to leave. | 
|  | */ | 
|  | if (cluster_in_el == 0) | 
|  | break; | 
|  |  | 
|  | /* | 
|  | * The 'pos' searched for previous extent block is | 
|  | * always one cluster less than actual trunc_end. | 
|  | */ | 
|  | trunc_end = cluster_in_el + 1; | 
|  |  | 
|  | ocfs2_reinit_path(path, 1); | 
|  |  | 
|  | continue; | 
|  |  | 
|  | } else | 
|  | rec = &el->l_recs[i]; | 
|  |  | 
|  | ocfs2_calc_trunc_pos(inode, el, rec, trunc_start, &trunc_cpos, | 
|  | &trunc_len, &trunc_end, &blkno, &done); | 
|  | if (done) | 
|  | break; | 
|  |  | 
|  | flags = rec->e_flags; | 
|  | phys_cpos = ocfs2_blocks_to_clusters(inode->i_sb, blkno); | 
|  |  | 
|  | ret = ocfs2_remove_btree_range(inode, &et, trunc_cpos, | 
|  | phys_cpos, trunc_len, flags, | 
|  | &dealloc, refcount_loc); | 
|  | if (ret < 0) { | 
|  | mlog_errno(ret); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | cluster_in_el = trunc_end; | 
|  |  | 
|  | ocfs2_reinit_path(path, 1); | 
|  | } | 
|  |  | 
|  | ocfs2_truncate_cluster_pages(inode, byte_start, byte_len); | 
|  |  | 
|  | out: | 
|  | ocfs2_schedule_truncate_log_flush(osb, 1); | 
|  | ocfs2_run_deallocs(osb, &dealloc); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Parts of this function taken from xfs_change_file_space() | 
|  | */ | 
|  | static int __ocfs2_change_file_space(struct file *file, struct inode *inode, | 
|  | loff_t f_pos, unsigned int cmd, | 
|  | struct ocfs2_space_resv *sr, | 
|  | int change_size) | 
|  | { | 
|  | int ret; | 
|  | s64 llen; | 
|  | loff_t size; | 
|  | struct ocfs2_super *osb = OCFS2_SB(inode->i_sb); | 
|  | struct buffer_head *di_bh = NULL; | 
|  | handle_t *handle; | 
|  | unsigned long long max_off = inode->i_sb->s_maxbytes; | 
|  |  | 
|  | if (ocfs2_is_hard_readonly(osb) || ocfs2_is_soft_readonly(osb)) | 
|  | return -EROFS; | 
|  |  | 
|  | mutex_lock(&inode->i_mutex); | 
|  |  | 
|  | /* | 
|  | * This prevents concurrent writes on other nodes | 
|  | */ | 
|  | ret = ocfs2_rw_lock(inode, 1); | 
|  | if (ret) { | 
|  | mlog_errno(ret); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | ret = ocfs2_inode_lock(inode, &di_bh, 1); | 
|  | if (ret) { | 
|  | mlog_errno(ret); | 
|  | goto out_rw_unlock; | 
|  | } | 
|  |  | 
|  | if (inode->i_flags & (S_IMMUTABLE|S_APPEND)) { | 
|  | ret = -EPERM; | 
|  | goto out_inode_unlock; | 
|  | } | 
|  |  | 
|  | switch (sr->l_whence) { | 
|  | case 0: /*SEEK_SET*/ | 
|  | break; | 
|  | case 1: /*SEEK_CUR*/ | 
|  | sr->l_start += f_pos; | 
|  | break; | 
|  | case 2: /*SEEK_END*/ | 
|  | sr->l_start += i_size_read(inode); | 
|  | break; | 
|  | default: | 
|  | ret = -EINVAL; | 
|  | goto out_inode_unlock; | 
|  | } | 
|  | sr->l_whence = 0; | 
|  |  | 
|  | llen = sr->l_len > 0 ? sr->l_len - 1 : sr->l_len; | 
|  |  | 
|  | if (sr->l_start < 0 | 
|  | || sr->l_start > max_off | 
|  | || (sr->l_start + llen) < 0 | 
|  | || (sr->l_start + llen) > max_off) { | 
|  | ret = -EINVAL; | 
|  | goto out_inode_unlock; | 
|  | } | 
|  | size = sr->l_start + sr->l_len; | 
|  |  | 
|  | if (cmd == OCFS2_IOC_RESVSP || cmd == OCFS2_IOC_RESVSP64) { | 
|  | if (sr->l_len <= 0) { | 
|  | ret = -EINVAL; | 
|  | goto out_inode_unlock; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (file && should_remove_suid(file->f_path.dentry)) { | 
|  | ret = __ocfs2_write_remove_suid(inode, di_bh); | 
|  | if (ret) { | 
|  | mlog_errno(ret); | 
|  | goto out_inode_unlock; | 
|  | } | 
|  | } | 
|  |  | 
|  | down_write(&OCFS2_I(inode)->ip_alloc_sem); | 
|  | switch (cmd) { | 
|  | case OCFS2_IOC_RESVSP: | 
|  | case OCFS2_IOC_RESVSP64: | 
|  | /* | 
|  | * This takes unsigned offsets, but the signed ones we | 
|  | * pass have been checked against overflow above. | 
|  | */ | 
|  | ret = ocfs2_allocate_unwritten_extents(inode, sr->l_start, | 
|  | sr->l_len); | 
|  | break; | 
|  | case OCFS2_IOC_UNRESVSP: | 
|  | case OCFS2_IOC_UNRESVSP64: | 
|  | ret = ocfs2_remove_inode_range(inode, di_bh, sr->l_start, | 
|  | sr->l_len); | 
|  | break; | 
|  | default: | 
|  | ret = -EINVAL; | 
|  | } | 
|  | up_write(&OCFS2_I(inode)->ip_alloc_sem); | 
|  | if (ret) { | 
|  | mlog_errno(ret); | 
|  | goto out_inode_unlock; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * We update c/mtime for these changes | 
|  | */ | 
|  | handle = ocfs2_start_trans(osb, OCFS2_INODE_UPDATE_CREDITS); | 
|  | if (IS_ERR(handle)) { | 
|  | ret = PTR_ERR(handle); | 
|  | mlog_errno(ret); | 
|  | goto out_inode_unlock; | 
|  | } | 
|  |  | 
|  | if (change_size && i_size_read(inode) < size) | 
|  | i_size_write(inode, size); | 
|  |  | 
|  | inode->i_ctime = inode->i_mtime = CURRENT_TIME; | 
|  | ret = ocfs2_mark_inode_dirty(handle, inode, di_bh); | 
|  | if (ret < 0) | 
|  | mlog_errno(ret); | 
|  |  | 
|  | if (file->f_flags & O_SYNC) | 
|  | handle->h_sync = 1; | 
|  |  | 
|  | ocfs2_commit_trans(osb, handle); | 
|  |  | 
|  | out_inode_unlock: | 
|  | brelse(di_bh); | 
|  | ocfs2_inode_unlock(inode, 1); | 
|  | out_rw_unlock: | 
|  | ocfs2_rw_unlock(inode, 1); | 
|  |  | 
|  | out: | 
|  | mutex_unlock(&inode->i_mutex); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | int ocfs2_change_file_space(struct file *file, unsigned int cmd, | 
|  | struct ocfs2_space_resv *sr) | 
|  | { | 
|  | struct inode *inode = file->f_path.dentry->d_inode; | 
|  | struct ocfs2_super *osb = OCFS2_SB(inode->i_sb); | 
|  |  | 
|  | if ((cmd == OCFS2_IOC_RESVSP || cmd == OCFS2_IOC_RESVSP64) && | 
|  | !ocfs2_writes_unwritten_extents(osb)) | 
|  | return -ENOTTY; | 
|  | else if ((cmd == OCFS2_IOC_UNRESVSP || cmd == OCFS2_IOC_UNRESVSP64) && | 
|  | !ocfs2_sparse_alloc(osb)) | 
|  | return -ENOTTY; | 
|  |  | 
|  | if (!S_ISREG(inode->i_mode)) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (!(file->f_mode & FMODE_WRITE)) | 
|  | return -EBADF; | 
|  |  | 
|  | return __ocfs2_change_file_space(file, inode, file->f_pos, cmd, sr, 0); | 
|  | } | 
|  |  | 
|  | static long ocfs2_fallocate(struct file *file, int mode, loff_t offset, | 
|  | loff_t len) | 
|  | { | 
|  | struct inode *inode = file->f_path.dentry->d_inode; | 
|  | struct ocfs2_super *osb = OCFS2_SB(inode->i_sb); | 
|  | struct ocfs2_space_resv sr; | 
|  | int change_size = 1; | 
|  | int cmd = OCFS2_IOC_RESVSP64; | 
|  |  | 
|  | if (mode & ~(FALLOC_FL_KEEP_SIZE | FALLOC_FL_PUNCH_HOLE)) | 
|  | return -EOPNOTSUPP; | 
|  | if (!ocfs2_writes_unwritten_extents(osb)) | 
|  | return -EOPNOTSUPP; | 
|  |  | 
|  | if (mode & FALLOC_FL_KEEP_SIZE) | 
|  | change_size = 0; | 
|  |  | 
|  | if (mode & FALLOC_FL_PUNCH_HOLE) | 
|  | cmd = OCFS2_IOC_UNRESVSP64; | 
|  |  | 
|  | sr.l_whence = 0; | 
|  | sr.l_start = (s64)offset; | 
|  | sr.l_len = (s64)len; | 
|  |  | 
|  | return __ocfs2_change_file_space(NULL, inode, offset, cmd, &sr, | 
|  | change_size); | 
|  | } | 
|  |  | 
|  | int ocfs2_check_range_for_refcount(struct inode *inode, loff_t pos, | 
|  | size_t count) | 
|  | { | 
|  | int ret = 0; | 
|  | unsigned int extent_flags; | 
|  | u32 cpos, clusters, extent_len, phys_cpos; | 
|  | struct super_block *sb = inode->i_sb; | 
|  |  | 
|  | if (!ocfs2_refcount_tree(OCFS2_SB(inode->i_sb)) || | 
|  | !(OCFS2_I(inode)->ip_dyn_features & OCFS2_HAS_REFCOUNT_FL) || | 
|  | OCFS2_I(inode)->ip_dyn_features & OCFS2_INLINE_DATA_FL) | 
|  | return 0; | 
|  |  | 
|  | cpos = pos >> OCFS2_SB(sb)->s_clustersize_bits; | 
|  | clusters = ocfs2_clusters_for_bytes(sb, pos + count) - cpos; | 
|  |  | 
|  | while (clusters) { | 
|  | ret = ocfs2_get_clusters(inode, cpos, &phys_cpos, &extent_len, | 
|  | &extent_flags); | 
|  | if (ret < 0) { | 
|  | mlog_errno(ret); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if (phys_cpos && (extent_flags & OCFS2_EXT_REFCOUNTED)) { | 
|  | ret = 1; | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (extent_len > clusters) | 
|  | extent_len = clusters; | 
|  |  | 
|  | clusters -= extent_len; | 
|  | cpos += extent_len; | 
|  | } | 
|  | out: | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void ocfs2_aiodio_wait(struct inode *inode) | 
|  | { | 
|  | wait_queue_head_t *wq = ocfs2_ioend_wq(inode); | 
|  |  | 
|  | wait_event(*wq, (atomic_read(&OCFS2_I(inode)->ip_unaligned_aio) == 0)); | 
|  | } | 
|  |  | 
|  | static int ocfs2_is_io_unaligned(struct inode *inode, size_t count, loff_t pos) | 
|  | { | 
|  | int blockmask = inode->i_sb->s_blocksize - 1; | 
|  | loff_t final_size = pos + count; | 
|  |  | 
|  | if ((pos & blockmask) || (final_size & blockmask)) | 
|  | return 1; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ocfs2_prepare_inode_for_refcount(struct inode *inode, | 
|  | struct file *file, | 
|  | loff_t pos, size_t count, | 
|  | int *meta_level) | 
|  | { | 
|  | int ret; | 
|  | struct buffer_head *di_bh = NULL; | 
|  | u32 cpos = pos >> OCFS2_SB(inode->i_sb)->s_clustersize_bits; | 
|  | u32 clusters = | 
|  | ocfs2_clusters_for_bytes(inode->i_sb, pos + count) - cpos; | 
|  |  | 
|  | ret = ocfs2_inode_lock(inode, &di_bh, 1); | 
|  | if (ret) { | 
|  | mlog_errno(ret); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | *meta_level = 1; | 
|  |  | 
|  | ret = ocfs2_refcount_cow(inode, file, di_bh, cpos, clusters, UINT_MAX); | 
|  | if (ret) | 
|  | mlog_errno(ret); | 
|  | out: | 
|  | brelse(di_bh); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int ocfs2_prepare_inode_for_write(struct file *file, | 
|  | loff_t *ppos, | 
|  | size_t count, | 
|  | int appending, | 
|  | int *direct_io, | 
|  | int *has_refcount) | 
|  | { | 
|  | int ret = 0, meta_level = 0; | 
|  | struct dentry *dentry = file->f_path.dentry; | 
|  | struct inode *inode = dentry->d_inode; | 
|  | loff_t saved_pos = 0, end; | 
|  |  | 
|  | /* | 
|  | * We start with a read level meta lock and only jump to an ex | 
|  | * if we need to make modifications here. | 
|  | */ | 
|  | for(;;) { | 
|  | ret = ocfs2_inode_lock(inode, NULL, meta_level); | 
|  | if (ret < 0) { | 
|  | meta_level = -1; | 
|  | mlog_errno(ret); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | /* Clear suid / sgid if necessary. We do this here | 
|  | * instead of later in the write path because | 
|  | * remove_suid() calls ->setattr without any hint that | 
|  | * we may have already done our cluster locking. Since | 
|  | * ocfs2_setattr() *must* take cluster locks to | 
|  | * proceeed, this will lead us to recursively lock the | 
|  | * inode. There's also the dinode i_size state which | 
|  | * can be lost via setattr during extending writes (we | 
|  | * set inode->i_size at the end of a write. */ | 
|  | if (should_remove_suid(dentry)) { | 
|  | if (meta_level == 0) { | 
|  | ocfs2_inode_unlock(inode, meta_level); | 
|  | meta_level = 1; | 
|  | continue; | 
|  | } | 
|  |  | 
|  | ret = ocfs2_write_remove_suid(inode); | 
|  | if (ret < 0) { | 
|  | mlog_errno(ret); | 
|  | goto out_unlock; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* work on a copy of ppos until we're sure that we won't have | 
|  | * to recalculate it due to relocking. */ | 
|  | if (appending) | 
|  | saved_pos = i_size_read(inode); | 
|  | else | 
|  | saved_pos = *ppos; | 
|  |  | 
|  | end = saved_pos + count; | 
|  |  | 
|  | ret = ocfs2_check_range_for_refcount(inode, saved_pos, count); | 
|  | if (ret == 1) { | 
|  | ocfs2_inode_unlock(inode, meta_level); | 
|  | meta_level = -1; | 
|  |  | 
|  | ret = ocfs2_prepare_inode_for_refcount(inode, | 
|  | file, | 
|  | saved_pos, | 
|  | count, | 
|  | &meta_level); | 
|  | if (has_refcount) | 
|  | *has_refcount = 1; | 
|  | if (direct_io) | 
|  | *direct_io = 0; | 
|  | } | 
|  |  | 
|  | if (ret < 0) { | 
|  | mlog_errno(ret); | 
|  | goto out_unlock; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Skip the O_DIRECT checks if we don't need | 
|  | * them. | 
|  | */ | 
|  | if (!direct_io || !(*direct_io)) | 
|  | break; | 
|  |  | 
|  | /* | 
|  | * There's no sane way to do direct writes to an inode | 
|  | * with inline data. | 
|  | */ | 
|  | if (OCFS2_I(inode)->ip_dyn_features & OCFS2_INLINE_DATA_FL) { | 
|  | *direct_io = 0; | 
|  | break; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Allowing concurrent direct writes means | 
|  | * i_size changes wouldn't be synchronized, so | 
|  | * one node could wind up truncating another | 
|  | * nodes writes. | 
|  | */ | 
|  | if (end > i_size_read(inode)) { | 
|  | *direct_io = 0; | 
|  | break; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * We don't fill holes during direct io, so | 
|  | * check for them here. If any are found, the | 
|  | * caller will have to retake some cluster | 
|  | * locks and initiate the io as buffered. | 
|  | */ | 
|  | ret = ocfs2_check_range_for_holes(inode, saved_pos, count); | 
|  | if (ret == 1) { | 
|  | *direct_io = 0; | 
|  | ret = 0; | 
|  | } else if (ret < 0) | 
|  | mlog_errno(ret); | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (appending) | 
|  | *ppos = saved_pos; | 
|  |  | 
|  | out_unlock: | 
|  | trace_ocfs2_prepare_inode_for_write(OCFS2_I(inode)->ip_blkno, | 
|  | saved_pos, appending, count, | 
|  | direct_io, has_refcount); | 
|  |  | 
|  | if (meta_level >= 0) | 
|  | ocfs2_inode_unlock(inode, meta_level); | 
|  |  | 
|  | out: | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static ssize_t ocfs2_file_aio_write(struct kiocb *iocb, | 
|  | const struct iovec *iov, | 
|  | unsigned long nr_segs, | 
|  | loff_t pos) | 
|  | { | 
|  | int ret, direct_io, appending, rw_level, have_alloc_sem  = 0; | 
|  | int can_do_direct, has_refcount = 0; | 
|  | ssize_t written = 0; | 
|  | size_t ocount;		/* original count */ | 
|  | size_t count;		/* after file limit checks */ | 
|  | loff_t old_size, *ppos = &iocb->ki_pos; | 
|  | u32 old_clusters; | 
|  | struct file *file = iocb->ki_filp; | 
|  | struct inode *inode = file->f_path.dentry->d_inode; | 
|  | struct ocfs2_super *osb = OCFS2_SB(inode->i_sb); | 
|  | int full_coherency = !(osb->s_mount_opt & | 
|  | OCFS2_MOUNT_COHERENCY_BUFFERED); | 
|  | int unaligned_dio = 0; | 
|  |  | 
|  | trace_ocfs2_file_aio_write(inode, file, file->f_path.dentry, | 
|  | (unsigned long long)OCFS2_I(inode)->ip_blkno, | 
|  | file->f_path.dentry->d_name.len, | 
|  | file->f_path.dentry->d_name.name, | 
|  | (unsigned int)nr_segs); | 
|  |  | 
|  | if (iocb->ki_left == 0) | 
|  | return 0; | 
|  |  | 
|  | vfs_check_frozen(inode->i_sb, SB_FREEZE_WRITE); | 
|  |  | 
|  | appending = file->f_flags & O_APPEND ? 1 : 0; | 
|  | direct_io = file->f_flags & O_DIRECT ? 1 : 0; | 
|  |  | 
|  | mutex_lock(&inode->i_mutex); | 
|  |  | 
|  | ocfs2_iocb_clear_sem_locked(iocb); | 
|  |  | 
|  | relock: | 
|  | /* to match setattr's i_mutex -> rw_lock ordering */ | 
|  | if (direct_io) { | 
|  | have_alloc_sem = 1; | 
|  | /* communicate with ocfs2_dio_end_io */ | 
|  | ocfs2_iocb_set_sem_locked(iocb); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Concurrent O_DIRECT writes are allowed with | 
|  | * mount_option "coherency=buffered". | 
|  | */ | 
|  | rw_level = (!direct_io || full_coherency); | 
|  |  | 
|  | ret = ocfs2_rw_lock(inode, rw_level); | 
|  | if (ret < 0) { | 
|  | mlog_errno(ret); | 
|  | goto out_sems; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * O_DIRECT writes with "coherency=full" need to take EX cluster | 
|  | * inode_lock to guarantee coherency. | 
|  | */ | 
|  | if (direct_io && full_coherency) { | 
|  | /* | 
|  | * We need to take and drop the inode lock to force | 
|  | * other nodes to drop their caches.  Buffered I/O | 
|  | * already does this in write_begin(). | 
|  | */ | 
|  | ret = ocfs2_inode_lock(inode, NULL, 1); | 
|  | if (ret < 0) { | 
|  | mlog_errno(ret); | 
|  | goto out_sems; | 
|  | } | 
|  |  | 
|  | ocfs2_inode_unlock(inode, 1); | 
|  | } | 
|  |  | 
|  | can_do_direct = direct_io; | 
|  | ret = ocfs2_prepare_inode_for_write(file, ppos, | 
|  | iocb->ki_left, appending, | 
|  | &can_do_direct, &has_refcount); | 
|  | if (ret < 0) { | 
|  | mlog_errno(ret); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if (direct_io && !is_sync_kiocb(iocb)) | 
|  | unaligned_dio = ocfs2_is_io_unaligned(inode, iocb->ki_left, | 
|  | *ppos); | 
|  |  | 
|  | /* | 
|  | * We can't complete the direct I/O as requested, fall back to | 
|  | * buffered I/O. | 
|  | */ | 
|  | if (direct_io && !can_do_direct) { | 
|  | ocfs2_rw_unlock(inode, rw_level); | 
|  |  | 
|  | have_alloc_sem = 0; | 
|  | rw_level = -1; | 
|  |  | 
|  | direct_io = 0; | 
|  | goto relock; | 
|  | } | 
|  |  | 
|  | if (unaligned_dio) { | 
|  | /* | 
|  | * Wait on previous unaligned aio to complete before | 
|  | * proceeding. | 
|  | */ | 
|  | ocfs2_aiodio_wait(inode); | 
|  |  | 
|  | /* Mark the iocb as needing a decrement in ocfs2_dio_end_io */ | 
|  | atomic_inc(&OCFS2_I(inode)->ip_unaligned_aio); | 
|  | ocfs2_iocb_set_unaligned_aio(iocb); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * To later detect whether a journal commit for sync writes is | 
|  | * necessary, we sample i_size, and cluster count here. | 
|  | */ | 
|  | old_size = i_size_read(inode); | 
|  | old_clusters = OCFS2_I(inode)->ip_clusters; | 
|  |  | 
|  | /* communicate with ocfs2_dio_end_io */ | 
|  | ocfs2_iocb_set_rw_locked(iocb, rw_level); | 
|  |  | 
|  | ret = generic_segment_checks(iov, &nr_segs, &ocount, | 
|  | VERIFY_READ); | 
|  | if (ret) | 
|  | goto out_dio; | 
|  |  | 
|  | count = ocount; | 
|  | ret = generic_write_checks(file, ppos, &count, | 
|  | S_ISBLK(inode->i_mode)); | 
|  | if (ret) | 
|  | goto out_dio; | 
|  |  | 
|  | if (direct_io) { | 
|  | written = generic_file_direct_write(iocb, iov, &nr_segs, *ppos, | 
|  | ppos, count, ocount); | 
|  | if (written < 0) { | 
|  | ret = written; | 
|  | goto out_dio; | 
|  | } | 
|  | } else { | 
|  | current->backing_dev_info = file->f_mapping->backing_dev_info; | 
|  | written = generic_file_buffered_write(iocb, iov, nr_segs, *ppos, | 
|  | ppos, count, 0); | 
|  | current->backing_dev_info = NULL; | 
|  | } | 
|  |  | 
|  | out_dio: | 
|  | /* buffered aio wouldn't have proper lock coverage today */ | 
|  | BUG_ON(ret == -EIOCBQUEUED && !(file->f_flags & O_DIRECT)); | 
|  |  | 
|  | if (((file->f_flags & O_DSYNC) && !direct_io) || IS_SYNC(inode) || | 
|  | ((file->f_flags & O_DIRECT) && !direct_io)) { | 
|  | ret = filemap_fdatawrite_range(file->f_mapping, pos, | 
|  | pos + count - 1); | 
|  | if (ret < 0) | 
|  | written = ret; | 
|  |  | 
|  | if (!ret && ((old_size != i_size_read(inode)) || | 
|  | (old_clusters != OCFS2_I(inode)->ip_clusters) || | 
|  | has_refcount)) { | 
|  | ret = jbd2_journal_force_commit(osb->journal->j_journal); | 
|  | if (ret < 0) | 
|  | written = ret; | 
|  | } | 
|  |  | 
|  | if (!ret) | 
|  | ret = filemap_fdatawait_range(file->f_mapping, pos, | 
|  | pos + count - 1); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * deep in g_f_a_w_n()->ocfs2_direct_IO we pass in a ocfs2_dio_end_io | 
|  | * function pointer which is called when o_direct io completes so that | 
|  | * it can unlock our rw lock. | 
|  | * Unfortunately there are error cases which call end_io and others | 
|  | * that don't.  so we don't have to unlock the rw_lock if either an | 
|  | * async dio is going to do it in the future or an end_io after an | 
|  | * error has already done it. | 
|  | */ | 
|  | if ((ret == -EIOCBQUEUED) || (!ocfs2_iocb_is_rw_locked(iocb))) { | 
|  | rw_level = -1; | 
|  | have_alloc_sem = 0; | 
|  | unaligned_dio = 0; | 
|  | } | 
|  |  | 
|  | if (unaligned_dio) | 
|  | atomic_dec(&OCFS2_I(inode)->ip_unaligned_aio); | 
|  |  | 
|  | out: | 
|  | if (rw_level != -1) | 
|  | ocfs2_rw_unlock(inode, rw_level); | 
|  |  | 
|  | out_sems: | 
|  | if (have_alloc_sem) | 
|  | ocfs2_iocb_clear_sem_locked(iocb); | 
|  |  | 
|  | mutex_unlock(&inode->i_mutex); | 
|  |  | 
|  | if (written) | 
|  | ret = written; | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int ocfs2_splice_to_file(struct pipe_inode_info *pipe, | 
|  | struct file *out, | 
|  | struct splice_desc *sd) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | ret = ocfs2_prepare_inode_for_write(out, &sd->pos, | 
|  | sd->total_len, 0, NULL, NULL); | 
|  | if (ret < 0) { | 
|  | mlog_errno(ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | return splice_from_pipe_feed(pipe, sd, pipe_to_file); | 
|  | } | 
|  |  | 
|  | static ssize_t ocfs2_file_splice_write(struct pipe_inode_info *pipe, | 
|  | struct file *out, | 
|  | loff_t *ppos, | 
|  | size_t len, | 
|  | unsigned int flags) | 
|  | { | 
|  | int ret; | 
|  | struct address_space *mapping = out->f_mapping; | 
|  | struct inode *inode = mapping->host; | 
|  | struct splice_desc sd = { | 
|  | .total_len = len, | 
|  | .flags = flags, | 
|  | .pos = *ppos, | 
|  | .u.file = out, | 
|  | }; | 
|  |  | 
|  |  | 
|  | trace_ocfs2_file_splice_write(inode, out, out->f_path.dentry, | 
|  | (unsigned long long)OCFS2_I(inode)->ip_blkno, | 
|  | out->f_path.dentry->d_name.len, | 
|  | out->f_path.dentry->d_name.name, len); | 
|  |  | 
|  | if (pipe->inode) | 
|  | mutex_lock_nested(&pipe->inode->i_mutex, I_MUTEX_PARENT); | 
|  |  | 
|  | splice_from_pipe_begin(&sd); | 
|  | do { | 
|  | ret = splice_from_pipe_next(pipe, &sd); | 
|  | if (ret <= 0) | 
|  | break; | 
|  |  | 
|  | mutex_lock_nested(&inode->i_mutex, I_MUTEX_CHILD); | 
|  | ret = ocfs2_rw_lock(inode, 1); | 
|  | if (ret < 0) | 
|  | mlog_errno(ret); | 
|  | else { | 
|  | ret = ocfs2_splice_to_file(pipe, out, &sd); | 
|  | ocfs2_rw_unlock(inode, 1); | 
|  | } | 
|  | mutex_unlock(&inode->i_mutex); | 
|  | } while (ret > 0); | 
|  | splice_from_pipe_end(pipe, &sd); | 
|  |  | 
|  | if (pipe->inode) | 
|  | mutex_unlock(&pipe->inode->i_mutex); | 
|  |  | 
|  | if (sd.num_spliced) | 
|  | ret = sd.num_spliced; | 
|  |  | 
|  | if (ret > 0) { | 
|  | unsigned long nr_pages; | 
|  | int err; | 
|  |  | 
|  | nr_pages = (ret + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT; | 
|  |  | 
|  | err = generic_write_sync(out, *ppos, ret); | 
|  | if (err) | 
|  | ret = err; | 
|  | else | 
|  | *ppos += ret; | 
|  |  | 
|  | balance_dirty_pages_ratelimited_nr(mapping, nr_pages); | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static ssize_t ocfs2_file_splice_read(struct file *in, | 
|  | loff_t *ppos, | 
|  | struct pipe_inode_info *pipe, | 
|  | size_t len, | 
|  | unsigned int flags) | 
|  | { | 
|  | int ret = 0, lock_level = 0; | 
|  | struct inode *inode = in->f_path.dentry->d_inode; | 
|  |  | 
|  | trace_ocfs2_file_splice_read(inode, in, in->f_path.dentry, | 
|  | (unsigned long long)OCFS2_I(inode)->ip_blkno, | 
|  | in->f_path.dentry->d_name.len, | 
|  | in->f_path.dentry->d_name.name, len); | 
|  |  | 
|  | /* | 
|  | * See the comment in ocfs2_file_aio_read() | 
|  | */ | 
|  | ret = ocfs2_inode_lock_atime(inode, in->f_vfsmnt, &lock_level); | 
|  | if (ret < 0) { | 
|  | mlog_errno(ret); | 
|  | goto bail; | 
|  | } | 
|  | ocfs2_inode_unlock(inode, lock_level); | 
|  |  | 
|  | ret = generic_file_splice_read(in, ppos, pipe, len, flags); | 
|  |  | 
|  | bail: | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static ssize_t ocfs2_file_aio_read(struct kiocb *iocb, | 
|  | const struct iovec *iov, | 
|  | unsigned long nr_segs, | 
|  | loff_t pos) | 
|  | { | 
|  | int ret = 0, rw_level = -1, have_alloc_sem = 0, lock_level = 0; | 
|  | struct file *filp = iocb->ki_filp; | 
|  | struct inode *inode = filp->f_path.dentry->d_inode; | 
|  |  | 
|  | trace_ocfs2_file_aio_read(inode, filp, filp->f_path.dentry, | 
|  | (unsigned long long)OCFS2_I(inode)->ip_blkno, | 
|  | filp->f_path.dentry->d_name.len, | 
|  | filp->f_path.dentry->d_name.name, nr_segs); | 
|  |  | 
|  |  | 
|  | if (!inode) { | 
|  | ret = -EINVAL; | 
|  | mlog_errno(ret); | 
|  | goto bail; | 
|  | } | 
|  |  | 
|  | ocfs2_iocb_clear_sem_locked(iocb); | 
|  |  | 
|  | /* | 
|  | * buffered reads protect themselves in ->readpage().  O_DIRECT reads | 
|  | * need locks to protect pending reads from racing with truncate. | 
|  | */ | 
|  | if (filp->f_flags & O_DIRECT) { | 
|  | have_alloc_sem = 1; | 
|  | ocfs2_iocb_set_sem_locked(iocb); | 
|  |  | 
|  | ret = ocfs2_rw_lock(inode, 0); | 
|  | if (ret < 0) { | 
|  | mlog_errno(ret); | 
|  | goto bail; | 
|  | } | 
|  | rw_level = 0; | 
|  | /* communicate with ocfs2_dio_end_io */ | 
|  | ocfs2_iocb_set_rw_locked(iocb, rw_level); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * We're fine letting folks race truncates and extending | 
|  | * writes with read across the cluster, just like they can | 
|  | * locally. Hence no rw_lock during read. | 
|  | * | 
|  | * Take and drop the meta data lock to update inode fields | 
|  | * like i_size. This allows the checks down below | 
|  | * generic_file_aio_read() a chance of actually working. | 
|  | */ | 
|  | ret = ocfs2_inode_lock_atime(inode, filp->f_vfsmnt, &lock_level); | 
|  | if (ret < 0) { | 
|  | mlog_errno(ret); | 
|  | goto bail; | 
|  | } | 
|  | ocfs2_inode_unlock(inode, lock_level); | 
|  |  | 
|  | ret = generic_file_aio_read(iocb, iov, nr_segs, iocb->ki_pos); | 
|  | trace_generic_file_aio_read_ret(ret); | 
|  |  | 
|  | /* buffered aio wouldn't have proper lock coverage today */ | 
|  | BUG_ON(ret == -EIOCBQUEUED && !(filp->f_flags & O_DIRECT)); | 
|  |  | 
|  | /* see ocfs2_file_aio_write */ | 
|  | if (ret == -EIOCBQUEUED || !ocfs2_iocb_is_rw_locked(iocb)) { | 
|  | rw_level = -1; | 
|  | have_alloc_sem = 0; | 
|  | } | 
|  |  | 
|  | bail: | 
|  | if (have_alloc_sem) | 
|  | ocfs2_iocb_clear_sem_locked(iocb); | 
|  |  | 
|  | if (rw_level != -1) | 
|  | ocfs2_rw_unlock(inode, rw_level); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* Refer generic_file_llseek_unlocked() */ | 
|  | static loff_t ocfs2_file_llseek(struct file *file, loff_t offset, int origin) | 
|  | { | 
|  | struct inode *inode = file->f_mapping->host; | 
|  | int ret = 0; | 
|  |  | 
|  | mutex_lock(&inode->i_mutex); | 
|  |  | 
|  | switch (origin) { | 
|  | case SEEK_SET: | 
|  | break; | 
|  | case SEEK_END: | 
|  | offset += inode->i_size; | 
|  | break; | 
|  | case SEEK_CUR: | 
|  | if (offset == 0) { | 
|  | offset = file->f_pos; | 
|  | goto out; | 
|  | } | 
|  | offset += file->f_pos; | 
|  | break; | 
|  | case SEEK_DATA: | 
|  | case SEEK_HOLE: | 
|  | ret = ocfs2_seek_data_hole_offset(file, &offset, origin); | 
|  | if (ret) | 
|  | goto out; | 
|  | break; | 
|  | default: | 
|  | ret = -EINVAL; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if (offset < 0 && !(file->f_mode & FMODE_UNSIGNED_OFFSET)) | 
|  | ret = -EINVAL; | 
|  | if (!ret && offset > inode->i_sb->s_maxbytes) | 
|  | ret = -EINVAL; | 
|  | if (ret) | 
|  | goto out; | 
|  |  | 
|  | if (offset != file->f_pos) { | 
|  | file->f_pos = offset; | 
|  | file->f_version = 0; | 
|  | } | 
|  |  | 
|  | out: | 
|  | mutex_unlock(&inode->i_mutex); | 
|  | if (ret) | 
|  | return ret; | 
|  | return offset; | 
|  | } | 
|  |  | 
|  | const struct inode_operations ocfs2_file_iops = { | 
|  | .setattr	= ocfs2_setattr, | 
|  | .getattr	= ocfs2_getattr, | 
|  | .permission	= ocfs2_permission, | 
|  | .setxattr	= generic_setxattr, | 
|  | .getxattr	= generic_getxattr, | 
|  | .listxattr	= ocfs2_listxattr, | 
|  | .removexattr	= generic_removexattr, | 
|  | .fiemap		= ocfs2_fiemap, | 
|  | .get_acl	= ocfs2_iop_get_acl, | 
|  | }; | 
|  |  | 
|  | const struct inode_operations ocfs2_special_file_iops = { | 
|  | .setattr	= ocfs2_setattr, | 
|  | .getattr	= ocfs2_getattr, | 
|  | .permission	= ocfs2_permission, | 
|  | .get_acl	= ocfs2_iop_get_acl, | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * Other than ->lock, keep ocfs2_fops and ocfs2_dops in sync with | 
|  | * ocfs2_fops_no_plocks and ocfs2_dops_no_plocks! | 
|  | */ | 
|  | const struct file_operations ocfs2_fops = { | 
|  | .llseek		= ocfs2_file_llseek, | 
|  | .read		= do_sync_read, | 
|  | .write		= do_sync_write, | 
|  | .mmap		= ocfs2_mmap, | 
|  | .fsync		= ocfs2_sync_file, | 
|  | .release	= ocfs2_file_release, | 
|  | .open		= ocfs2_file_open, | 
|  | .aio_read	= ocfs2_file_aio_read, | 
|  | .aio_write	= ocfs2_file_aio_write, | 
|  | .unlocked_ioctl	= ocfs2_ioctl, | 
|  | #ifdef CONFIG_COMPAT | 
|  | .compat_ioctl   = ocfs2_compat_ioctl, | 
|  | #endif | 
|  | .lock		= ocfs2_lock, | 
|  | .flock		= ocfs2_flock, | 
|  | .splice_read	= ocfs2_file_splice_read, | 
|  | .splice_write	= ocfs2_file_splice_write, | 
|  | .fallocate	= ocfs2_fallocate, | 
|  | }; | 
|  |  | 
|  | const struct file_operations ocfs2_dops = { | 
|  | .llseek		= generic_file_llseek, | 
|  | .read		= generic_read_dir, | 
|  | .readdir	= ocfs2_readdir, | 
|  | .fsync		= ocfs2_sync_file, | 
|  | .release	= ocfs2_dir_release, | 
|  | .open		= ocfs2_dir_open, | 
|  | .unlocked_ioctl	= ocfs2_ioctl, | 
|  | #ifdef CONFIG_COMPAT | 
|  | .compat_ioctl   = ocfs2_compat_ioctl, | 
|  | #endif | 
|  | .lock		= ocfs2_lock, | 
|  | .flock		= ocfs2_flock, | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * POSIX-lockless variants of our file_operations. | 
|  | * | 
|  | * These will be used if the underlying cluster stack does not support | 
|  | * posix file locking, if the user passes the "localflocks" mount | 
|  | * option, or if we have a local-only fs. | 
|  | * | 
|  | * ocfs2_flock is in here because all stacks handle UNIX file locks, | 
|  | * so we still want it in the case of no stack support for | 
|  | * plocks. Internally, it will do the right thing when asked to ignore | 
|  | * the cluster. | 
|  | */ | 
|  | const struct file_operations ocfs2_fops_no_plocks = { | 
|  | .llseek		= ocfs2_file_llseek, | 
|  | .read		= do_sync_read, | 
|  | .write		= do_sync_write, | 
|  | .mmap		= ocfs2_mmap, | 
|  | .fsync		= ocfs2_sync_file, | 
|  | .release	= ocfs2_file_release, | 
|  | .open		= ocfs2_file_open, | 
|  | .aio_read	= ocfs2_file_aio_read, | 
|  | .aio_write	= ocfs2_file_aio_write, | 
|  | .unlocked_ioctl	= ocfs2_ioctl, | 
|  | #ifdef CONFIG_COMPAT | 
|  | .compat_ioctl   = ocfs2_compat_ioctl, | 
|  | #endif | 
|  | .flock		= ocfs2_flock, | 
|  | .splice_read	= ocfs2_file_splice_read, | 
|  | .splice_write	= ocfs2_file_splice_write, | 
|  | .fallocate	= ocfs2_fallocate, | 
|  | }; | 
|  |  | 
|  | const struct file_operations ocfs2_dops_no_plocks = { | 
|  | .llseek		= generic_file_llseek, | 
|  | .read		= generic_read_dir, | 
|  | .readdir	= ocfs2_readdir, | 
|  | .fsync		= ocfs2_sync_file, | 
|  | .release	= ocfs2_dir_release, | 
|  | .open		= ocfs2_dir_open, | 
|  | .unlocked_ioctl	= ocfs2_ioctl, | 
|  | #ifdef CONFIG_COMPAT | 
|  | .compat_ioctl   = ocfs2_compat_ioctl, | 
|  | #endif | 
|  | .flock		= ocfs2_flock, | 
|  | }; |