diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 703a44f..552ea6d 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -118,6 +118,7 @@
  machine-$(CONFIG_ARCH_IXP23XX)    := ixp23xx
  machine-$(CONFIG_ARCH_OMAP1)	   := omap1
  machine-$(CONFIG_ARCH_OMAP2)	   := omap2
+ machine-$(CONFIG_ARCH_OMAP3)	   := omap2
     plat-$(CONFIG_ARCH_OMAP)	   := omap
  machine-$(CONFIG_ARCH_S3C2410)	   := s3c2410 s3c2400 s3c2412 s3c2440 s3c2442 s3c2443
     plat-$(CONFIG_PLAT_S3C24XX)	   := s3c24xx
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 7069c9d..e2481e4 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -15,8 +15,17 @@
 	bool "OMAP2430 support"
 	depends on ARCH_OMAP24XX
 
+config ARCH_OMAP34XX
+	bool "OMAP34xx Based System"
+	depends on ARCH_OMAP3
+
+config ARCH_OMAP3430
+	bool "OMAP3430 support"
+	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+	select ARCH_OMAP_OTG
+
 comment "OMAP Board Type"
-	depends on ARCH_OMAP2
+	depends on ARCH_OMAP2 || ARCH_OMAP3
 
 config MACH_OMAP_GENERIC
 	bool "Generic OMAP board"
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 800639e..0dc40db 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -12,6 +12,7 @@
 # Functions loaded to SRAM
 obj-$(CONFIG_ARCH_OMAP2420)		+= sram242x.o
 obj-$(CONFIG_ARCH_OMAP2430)		+= sram243x.o
+obj-$(CONFIG_ARCH_OMAP3)		+= sram34xx.o
 
 # Power Management
 ifeq ($(CONFIG_PM),y)
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index 149bfba..375ad27 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -220,6 +220,11 @@
 
 	GPMC_SET_ONE(GPMC_CS_CONFIG5, 24, 27, page_burst_access);
 
+	if (cpu_is_omap34xx()) {
+		GPMC_SET_ONE(GPMC_CS_CONFIG6, 16, 19, wr_data_mux_bus);
+		GPMC_SET_ONE(GPMC_CS_CONFIG6, 24, 28, wr_access);
+	}
+
 	/* caller is expected to have initialized CONFIG1 to cover
 	 * at least sync vs async
 	 */
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 03c6ab1..71a9de3 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -43,7 +43,9 @@
  * The machine specific code may provide the extra mapping besides the
  * default mapping provided here.
  */
-static struct map_desc omap2_io_desc[] __initdata = {
+
+#ifdef CONFIG_ARCH_OMAP24XX
+static struct map_desc omap24xx_io_desc[] __initdata = {
 	{
 		.virtual	= L3_24XX_VIRT,
 		.pfn		= __phys_to_pfn(L3_24XX_PHYS),
@@ -51,25 +53,15 @@
 		.type		= MT_DEVICE
 	},
 	{
-		.virtual        = L4_24XX_VIRT,
-		.pfn            = __phys_to_pfn(L4_24XX_PHYS),
-		.length         = L4_24XX_SIZE,
-		.type           = MT_DEVICE
-	},
-#ifdef CONFIG_ARCH_OMAP2430
-	{
-		.virtual	= L4_WK_243X_VIRT,
-		.pfn		= __phys_to_pfn(L4_WK_243X_PHYS),
-		.length		= L4_WK_243X_SIZE,
+		.virtual	= L4_24XX_VIRT,
+		.pfn		= __phys_to_pfn(L4_24XX_PHYS),
+		.length		= L4_24XX_SIZE,
 		.type		= MT_DEVICE
 	},
-	{
-		.virtual	= OMAP243X_GPMC_VIRT,
-		.pfn		= __phys_to_pfn(OMAP243X_GPMC_PHYS),
-		.length		= OMAP243X_GPMC_SIZE,
-		.type		= MT_DEVICE
-	},
-#endif
+};
+
+#ifdef CONFIG_ARCH_OMAP2420
+static struct map_desc omap242x_io_desc[] __initdata = {
 	{
 		.virtual	= DSP_MEM_24XX_VIRT,
 		.pfn		= __phys_to_pfn(DSP_MEM_24XX_PHYS),
@@ -87,12 +79,109 @@
 		.pfn		= __phys_to_pfn(DSP_MMU_24XX_PHYS),
 		.length		= DSP_MMU_24XX_SIZE,
 		.type		= MT_DEVICE
-	}
+	},
 };
 
+#endif
+
+#ifdef CONFIG_ARCH_OMAP2430
+static struct map_desc omap243x_io_desc[] __initdata = {
+	{
+		.virtual	= L4_WK_243X_VIRT,
+		.pfn		= __phys_to_pfn(L4_WK_243X_PHYS),
+		.length		= L4_WK_243X_SIZE,
+		.type		= MT_DEVICE
+	},
+	{
+		.virtual	= OMAP243X_GPMC_VIRT,
+		.pfn		= __phys_to_pfn(OMAP243X_GPMC_PHYS),
+		.length		= OMAP243X_GPMC_SIZE,
+		.type		= MT_DEVICE
+	},
+	{
+		.virtual	= OMAP243X_SDRC_VIRT,
+		.pfn		= __phys_to_pfn(OMAP243X_SDRC_PHYS),
+		.length		= OMAP243X_SDRC_SIZE,
+		.type		= MT_DEVICE
+	},
+	{
+		.virtual	= OMAP243X_SMS_VIRT,
+		.pfn		= __phys_to_pfn(OMAP243X_SMS_PHYS),
+		.length		= OMAP243X_SMS_SIZE,
+		.type		= MT_DEVICE
+	},
+};
+#endif
+#endif
+
+#ifdef	CONFIG_ARCH_OMAP34XX
+static struct map_desc omap34xx_io_desc[] __initdata = {
+	{
+		.virtual	= L3_34XX_VIRT,
+		.pfn		= __phys_to_pfn(L3_34XX_PHYS),
+		.length		= L3_34XX_SIZE,
+		.type		= MT_DEVICE
+	},
+	{
+		.virtual	= L4_34XX_VIRT,
+		.pfn		= __phys_to_pfn(L4_34XX_PHYS),
+		.length		= L4_34XX_SIZE,
+		.type		= MT_DEVICE
+	},
+	{
+		.virtual	= L4_WK_34XX_VIRT,
+		.pfn		= __phys_to_pfn(L4_WK_34XX_PHYS),
+		.length		= L4_WK_34XX_SIZE,
+		.type		= MT_DEVICE
+	},
+	{
+		.virtual	= OMAP34XX_GPMC_VIRT,
+		.pfn		= __phys_to_pfn(OMAP34XX_GPMC_PHYS),
+		.length		= OMAP34XX_GPMC_SIZE,
+		.type		= MT_DEVICE
+	},
+	{
+		.virtual	= OMAP343X_SMS_VIRT,
+		.pfn		= __phys_to_pfn(OMAP343X_SMS_PHYS),
+		.length		= OMAP343X_SMS_SIZE,
+		.type		= MT_DEVICE
+	},
+	{
+		.virtual	= OMAP343X_SDRC_VIRT,
+		.pfn		= __phys_to_pfn(OMAP343X_SDRC_PHYS),
+		.length		= OMAP343X_SDRC_SIZE,
+		.type		= MT_DEVICE
+	},
+	{
+		.virtual	= L4_PER_34XX_VIRT,
+		.pfn		= __phys_to_pfn(L4_PER_34XX_PHYS),
+		.length		= L4_PER_34XX_SIZE,
+		.type		= MT_DEVICE
+	},
+	{
+		.virtual	= L4_EMU_34XX_VIRT,
+		.pfn		= __phys_to_pfn(L4_EMU_34XX_PHYS),
+		.length		= L4_EMU_34XX_SIZE,
+		.type		= MT_DEVICE
+	},
+};
+#endif
+
 void __init omap2_map_common_io(void)
 {
-	iotable_init(omap2_io_desc, ARRAY_SIZE(omap2_io_desc));
+#if defined(CONFIG_ARCH_OMAP2420)
+	iotable_init(omap24xx_io_desc, ARRAY_SIZE(omap24xx_io_desc));
+	iotable_init(omap242x_io_desc, ARRAY_SIZE(omap242x_io_desc));
+#endif
+
+#if defined(CONFIG_ARCH_OMAP2430)
+	iotable_init(omap24xx_io_desc, ARRAY_SIZE(omap24xx_io_desc));
+	iotable_init(omap243x_io_desc, ARRAY_SIZE(omap243x_io_desc));
+#endif
+
+#if defined(CONFIG_ARCH_OMAP34XX)
+	iotable_init(omap34xx_io_desc, ARRAY_SIZE(omap34xx_io_desc));
+#endif
 
 	/* Normally devicemaps_init() would flush caches and tlb after
 	 * mdesc->map_io(), but we must also do it here because of the CPU
@@ -112,11 +201,6 @@
 	pwrdm_init(powerdomains_omap);
 	clkdm_init(clockdomains_omap, clkdm_pwrdm_autodeps);
 	omap2_clk_init();
-/*
- * Need to Fix this for 2430
- */
-#ifndef CONFIG_ARCH_OMAP2430
 	omap2_init_memory();
-#endif
 	gpmc_init();
 }
diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c
index c39e26d..d354e0f 100644
--- a/arch/arm/mach-omap2/irq.c
+++ b/arch/arm/mach-omap2/irq.c
@@ -128,6 +128,8 @@
 
 		if (cpu_is_omap24xx())
 			bank->base_reg = OMAP2_IO_ADDRESS(OMAP24XX_IC_BASE);
+		else if (cpu_is_omap34xx())
+			bank->base_reg = OMAP2_IO_ADDRESS(OMAP34XX_IC_BASE);
 
 		omap_irq_bank_init_one(bank);
 
diff --git a/arch/arm/mach-omap2/memory.c b/arch/arm/mach-omap2/memory.c
index 6b49cc9..48b01f4 100644
--- a/arch/arm/mach-omap2/memory.c
+++ b/arch/arm/mach-omap2/memory.c
@@ -102,6 +102,17 @@
 	return prev;
 }
 
+#if !defined(CONFIG_ARCH_OMAP2)
+void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
+				u32 base_cs, u32 force_unlock)
+{
+}
+void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
+				      u32 mem_type)
+{
+}
+#endif
+
 void omap2_init_memory_params(u32 force_lock_to_unlock_mode)
 {
 	unsigned long dll_cnt;
@@ -166,6 +177,9 @@
 {
 	u32 l;
 
+	if (!cpu_is_omap2420())
+		return;
+
 	l = sms_read_reg(SMS_SYSCONFIG);
 	l &= ~(0x3 << 3);
 	l |= (0x2 << 3);
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index 6188e2f..5558803 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -298,13 +298,13 @@
 
 /* TLL - HSUSB: 12-pin TLL Port 1*/
 MUX_CFG_34XX("Y8_3430_USB1HS_TLL_CLK", 0x5da,
-		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_OUTPUT)
-MUX_CFG_34XX("Y9_3430_USB1HS_TLL_STP", 0x5d8,
 		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("Y9_3430_USB1HS_TLL_STP", 0x5d8,
+		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLUP)
 MUX_CFG_34XX("AA14_3430_USB1HS_TLL_DIR", 0x5ec,
-		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_OUTPUT)
+		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
 MUX_CFG_34XX("AA11_3430_USB1HS_TLL_NXT", 0x5ee,
-		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_OUTPUT)
+		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
 MUX_CFG_34XX("W13_3430_USB1HS_TLL_D0", 0x5dc,
 		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
 MUX_CFG_34XX("W12_3430_USB1HS_TLL_D1", 0x5de,
@@ -324,13 +324,13 @@
 
 /* TLL - HSUSB: 12-pin TLL Port 2*/
 MUX_CFG_34XX("AA8_3430_USB2HS_TLL_CLK", 0x5f0,
-		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_OUTPUT)
-MUX_CFG_34XX("AA10_3430_USB2HS_TLL_STP", 0x5f2,
 		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AA10_3430_USB2HS_TLL_STP", 0x5f2,
+		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLUP)
 MUX_CFG_34XX("AA9_3430_USB2HS_TLL_DIR", 0x5f4,
-		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_OUTPUT)
+		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
 MUX_CFG_34XX("AB11_3430_USB2HS_TLL_NXT", 0x5f6,
-		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_OUTPUT)
+		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
 MUX_CFG_34XX("AB10_3430_USB2HS_TLL_D0", 0x5f8,
 		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
 MUX_CFG_34XX("AB9_3430_USB2HS_TLL_D1", 0x5fa,
@@ -350,13 +350,13 @@
 
 /* TLL - HSUSB: 12-pin TLL Port 3*/
 MUX_CFG_34XX("AA6_3430_USB3HS_TLL_CLK", 0x180,
-		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_OUTPUT)
-MUX_CFG_34XX("AB3_3430_USB3HS_TLL_STP", 0x166,
 		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AB3_3430_USB3HS_TLL_STP", 0x166,
+		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLUP)
 MUX_CFG_34XX("AA3_3430_USB3HS_TLL_DIR", 0x168,
-		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_OUTPUT)
+		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
 MUX_CFG_34XX("Y3_3430_USB3HS_TLL_NXT", 0x16a,
-		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_OUTPUT)
+		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
 MUX_CFG_34XX("AA5_3430_USB3HS_TLL_D0", 0x186,
 		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
 MUX_CFG_34XX("Y4_3430_USB3HS_TLL_D1", 0x184,
@@ -373,6 +373,49 @@
 		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
 MUX_CFG_34XX("AA12_3430_USB3HS_TLL_D7", 0x172,
 		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
+
+/* PHY FSUSB: FS Serial for Port 1 (multiple PHY modes supported) */
+MUX_CFG_34XX("AF10_3430_USB1FS_PHY_MM1_RXDP", 0x5d8,
+		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AG9_3430_USB1FS_PHY_MM1_RXDM", 0x5ee,
+		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("W13_3430_USB1FS_PHY_MM1_RXRCV", 0x5dc,
+		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("W12_3430_USB1FS_PHY_MM1_TXSE0", 0x5de,
+		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("W11_3430_USB1FS_PHY_MM1_TXDAT", 0x5e0,
+		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("Y11_3430_USB1FS_PHY_MM1_TXEN_N", 0x5ea,
+		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_OUTPUT)
+
+/* PHY FSUSB: FS Serial for Port 2 (multiple PHY modes supported) */
+MUX_CFG_34XX("AF7_3430_USB2FS_PHY_MM2_RXDP", 0x5f2,
+		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AH7_3430_USB2FS_PHY_MM2_RXDM", 0x5f6,
+		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AB10_3430_USB2FS_PHY_MM2_RXRCV", 0x5f8,
+		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AB9_3430_USB2FS_PHY_MM2_TXSE0", 0x5fa,
+		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("W3_3430_USB2FS_PHY_MM2_TXDAT", 0x1d4,
+		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("T4_3430_USB2FS_PHY_MM2_TXEN_N", 0x1de,
+		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_OUTPUT)
+
+/* PHY FSUSB: FS Serial for Port 3 (multiple PHY modes supported) */
+MUX_CFG_34XX("AH3_3430_USB3FS_PHY_MM3_RXDP", 0x166,
+		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AE3_3430_USB3FS_PHY_MM3_RXDM", 0x16a,
+		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AD1_3430_USB3FS_PHY_MM3_RXRCV", 0x186,
+		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AE1_3430_USB3FS_PHY_MM3_TXSE0", 0x184,
+		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AD2_3430_USB3FS_PHY_MM3_TXDAT", 0x188,
+		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AC1_3430_USB3FS_PHY_MM3_TXEN_N", 0x18a,
+		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_OUTPUT)
+
 };
 
 #define OMAP34XX_PINS_SZ	ARRAY_SIZE(omap34xx_pins)
diff --git a/arch/arm/mach-omap2/sram34xx.S b/arch/arm/mach-omap2/sram34xx.S
new file mode 100644
index 0000000..2c71461
--- /dev/null
+++ b/arch/arm/mach-omap2/sram34xx.S
@@ -0,0 +1,179 @@
+/*
+ * linux/arch/arm/mach-omap3/sram.S
+ *
+ * Omap3 specific functions that need to be run in internal SRAM
+ *
+ * (C) Copyright 2007
+ * Texas Instruments Inc.
+ * Rajendra Nayak <rnayak@ti.com>
+ *
+ * (C) Copyright 2004
+ * Texas Instruments, <www.ti.com>
+ * Richard Woodruff <r-woodruff2@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <mach/hardware.h>
+
+#include <mach/io.h>
+
+#include "sdrc.h"
+#include "cm.h"
+
+	.text
+
+/*
+ * Change frequency of core dpll
+ * r0 = sdrc_rfr_ctrl r1 = sdrc_actim_ctrla r2 = sdrc_actim_ctrlb r3 = M2
+ */
+ENTRY(omap3_sram_configure_core_dpll)
+	stmfd	sp!, {r1-r12, lr}	@ store regs to stack
+	cmp	r3, #0x2
+	blne	configure_sdrc
+	cmp	r3, #0x2
+	blne	lock_dll
+	cmp	r3, #0x1
+	blne	unlock_dll
+	bl	sdram_in_selfrefresh	@ put the SDRAM in self refresh
+	bl 	configure_core_dpll
+	bl	enable_sdrc
+	cmp	r3, #0x1
+	blne	wait_dll_unlock
+	cmp	r3, #0x2
+	blne	wait_dll_lock
+	cmp	r3, #0x1
+	blne	configure_sdrc
+	mov 	r0, #0 			@ return value
+	ldmfd	sp!, {r1-r12, pc}	@ restore regs and return
+unlock_dll:
+	ldr	r4, omap3_sdrc_dlla_ctrl
+	ldr	r5, [r4]
+	orr	r5, r5, #0x4
+	str	r5, [r4]
+	bx	lr
+lock_dll:
+	ldr	r4, omap3_sdrc_dlla_ctrl
+	ldr	r5, [r4]
+	bic	r5, r5, #0x4
+	str	r5, [r4]
+	bx	lr
+sdram_in_selfrefresh:
+	mov	r5, #0x0		@ Move 0 to R5
+	mcr	p15, 0, r5, c7, c10, 5	@ memory barrier
+	ldr	r4, omap3_sdrc_power	@ read the SDRC_POWER register
+	ldr	r5, [r4]		@ read the contents of SDRC_POWER
+	orr 	r5, r5, #0x40		@ enable self refresh on idle req
+	str 	r5, [r4]		@ write back to SDRC_POWER register
+	ldr	r4, omap3_cm_iclken1_core	@ read the CM_ICLKEN1_CORE reg
+	ldr	r5, [r4]
+	bic	r5, r5, #0x2		@ disable iclk bit for SRDC
+	str 	r5, [r4]
+wait_sdrc_idle:
+	ldr 	r4, omap3_cm_idlest1_core
+	ldr 	r5, [r4]
+	and 	r5, r5, #0x2		@ check for SDRC idle
+	cmp 	r5, #2
+	bne 	wait_sdrc_idle
+	bx 	lr
+configure_core_dpll:
+	ldr 	r4, omap3_cm_clksel1_pll
+	ldr	r5, [r4]
+	ldr	r6, core_m2_mask_val	@ modify m2 for core dpll
+	and	r5, r5, r6
+	orr	r5, r5, r3, lsl #0x1B	@ r3 contains the M2 val
+	str	r5, [r4]
+	mov 	r5, #0x800		@ wait for the clock to stabilise
+	cmp	r3, #2
+	bne	wait_clk_stable
+	bx	lr
+wait_clk_stable:
+	subs 	r5, r5, #1
+	bne	wait_clk_stable
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	bx	lr
+enable_sdrc:
+	ldr 	r4, omap3_cm_iclken1_core
+	ldr	r5, [r4]
+	orr 	r5, r5, #0x2		@ enable iclk bit for SDRC
+	str 	r5, [r4]
+wait_sdrc_idle1:
+	ldr 	r4, omap3_cm_idlest1_core
+	ldr	r5, [r4]
+	and 	r5, r5, #0x2
+	cmp	r5, #0
+	bne	wait_sdrc_idle1
+	ldr	r4, omap3_sdrc_power
+	ldr	r5, [r4]
+	bic 	r5, r5, #0x40
+	str 	r5, [r4]
+	bx	lr
+wait_dll_lock:
+	ldr	r4, omap3_sdrc_dlla_status
+	ldr	r5, [r4]
+	and 	r5, r5, #0x4
+	cmp	r5, #0x4
+	bne	wait_dll_lock
+	bx	lr
+wait_dll_unlock:
+	ldr	r4, omap3_sdrc_dlla_status
+	ldr	r5, [r4]
+	and	r5, r5, #0x4
+	cmp	r5, #0x0
+	bne	wait_dll_unlock
+	bx	lr
+configure_sdrc:
+	ldr	r4, omap3_sdrc_rfr_ctrl
+	str	r0, [r4]
+	ldr	r4, omap3_sdrc_actim_ctrla
+	str	r1, [r4]
+	ldr	r4, omap3_sdrc_actim_ctrlb
+	str	r2, [r4]
+	bx	lr
+
+omap3_sdrc_power:
+	.word OMAP34XX_SDRC_REGADDR(SDRC_POWER)
+omap3_cm_clksel1_pll:
+	.word OMAP34XX_CM_REGADDR(PLL_MOD, CM_CLKSEL1)
+omap3_cm_idlest1_core:
+	.word OMAP34XX_CM_REGADDR(CORE_MOD, CM_IDLEST)
+omap3_cm_iclken1_core:
+	.word OMAP34XX_CM_REGADDR(CORE_MOD, CM_ICLKEN1)
+omap3_sdrc_rfr_ctrl:
+	.word OMAP34XX_SDRC_REGADDR(SDRC_RFR_CTRL_0)
+omap3_sdrc_actim_ctrla:
+	.word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_A_0)
+omap3_sdrc_actim_ctrlb:
+	.word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_B_0)
+omap3_sdrc_dlla_status:
+	.word OMAP34XX_SDRC_REGADDR(SDRC_DLLA_STATUS)
+omap3_sdrc_dlla_ctrl:
+	.word OMAP34XX_SDRC_REGADDR(SDRC_DLLA_CTRL)
+core_m2_mask_val:
+	.word 0x07FFFFFF
+
+ENTRY(omap3_sram_configure_core_dpll_sz)
+	.word	. - omap3_sram_configure_core_dpll
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index ef62bf2..a94f0c4 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -15,6 +15,9 @@
 config ARCH_OMAP2
 	bool "TI OMAP2"
 
+config ARCH_OMAP3
+	bool "TI OMAP3"
+
 endchoice
 
 comment "OMAP Feature Selections"
@@ -112,13 +115,13 @@
 
 config OMAP_32K_TIMER
 	bool "Use 32KHz timer"
-	depends on ARCH_OMAP16XX || ARCH_OMAP24XX
+	depends on ARCH_OMAP16XX || ARCH_OMAP24XX || ARCH_OMAP34XX
 	help
 	  Select this option if you want to enable the OMAP 32KHz timer.
 	  This timer saves power compared to the OMAP_MPU_TIMER, and has
 	  support for no tick during idle. The 32KHz timer provides less
 	  intra-tick resolution than OMAP_MPU_TIMER. The 32KHz timer is
-	  currently only available for OMAP16XX and 24XX.
+	  currently only available for OMAP16XX, 24XX and 34XX.
 
 endchoice
 
@@ -133,7 +136,7 @@
 
 config OMAP_DM_TIMER
 	bool "Use dual-mode timer"
-	depends on ARCH_OMAP16XX || ARCH_OMAP24XX
+	depends on ARCH_OMAP16XX || ARCH_OMAP24XX || ARCH_OMAP34XX
 	help
 	 Select this option if you want to use OMAP Dual-Mode timers.
 
diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c
index 1c1d831..2625ce3 100644
--- a/arch/arm/plat-omap/devices.c
+++ b/arch/arm/plat-omap/devices.c
@@ -94,6 +94,10 @@
 
 static void omap_init_kp(void)
 {
+	/* 2430 and 34xx keypad is on TWL4030 */
+	if (cpu_is_omap2430() || cpu_is_omap34xx())
+		return;
+
 	if (machine_is_omap_h2() || machine_is_omap_h3()) {
 		omap_cfg_reg(F18_1610_KBC0);
 		omap_cfg_reg(D20_1610_KBC1);
@@ -395,8 +399,17 @@
 
 #if	defined(CONFIG_OMAP_WATCHDOG) || defined(CONFIG_OMAP_WATCHDOG_MODULE)
 
-#ifdef CONFIG_ARCH_OMAP24XX
+#if defined(CONFIG_ARCH_OMAP34XX)
+#define	OMAP_WDT_BASE		0x48314000
+#elif defined(CONFIG_ARCH_OMAP24XX)
+
+#ifdef CONFIG_ARCH_OMAP2430
+/* WDT2 */
+#define	OMAP_WDT_BASE		0x49016000
+#else
 #define	OMAP_WDT_BASE		0x48022000
+#endif
+
 #else
 #define	OMAP_WDT_BASE		0xfffeb000
 #endif
diff --git a/arch/arm/plat-omap/include/mach/debug-macro.S b/arch/arm/plat-omap/include/mach/debug-macro.S
index 1b0039b..1b11f5c 100644
--- a/arch/arm/plat-omap/include/mach/debug-macro.S
+++ b/arch/arm/plat-omap/include/mach/debug-macro.S
@@ -35,6 +35,18 @@
 #ifdef CONFIG_OMAP_LL_DEBUG_UART3
 		add	\rx, \rx, #0x00004000	@ UART 3
 #endif
+
+#elif	CONFIG_ARCH_OMAP3
+		moveq	\rx, #0x48000000	@ physical base address
+		movne	\rx, #0xd8000000	@ virtual base
+		orr	\rx, \rx, #0x0006a000
+#ifdef CONFIG_OMAP_LL_DEBUG_UART2
+		add	\rx, \rx, #0x00002000	@ UART 2
+#endif
+#ifdef CONFIG_OMAP_LL_DEBUG_UART3
+		add	\rx, \rx, #0x00fb0000	@ UART 3
+		add	\rx, \rx, #0x00006000
+#endif
 #endif
 		.endm
 
diff --git a/arch/arm/plat-omap/include/mach/entry-macro.S b/arch/arm/plat-omap/include/mach/entry-macro.S
index d4e9043..030118e 100644
--- a/arch/arm/plat-omap/include/mach/entry-macro.S
+++ b/arch/arm/plat-omap/include/mach/entry-macro.S
@@ -55,9 +55,17 @@
 1510:
 		.endm
 
-#elif defined(CONFIG_ARCH_OMAP24XX)
+#endif
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 
+#if defined(CONFIG_ARCH_OMAP24XX)
 #include <mach/omap24xx.h>
+#endif
+#if defined(CONFIG_ARCH_OMAP34XX)
+#include <mach/omap34xx.h>
+#endif
+
+#define INTCPS_SIR_IRQ_OFFSET	0x0040		/* Active interrupt number */
 
 		.macro	disable_fiq
 		.endm
@@ -79,7 +87,7 @@
 		ldr	\irqnr, [\base, #0xd8] /* IRQ pending reg 3 */
 		cmp	\irqnr, #0x0
 2222:
-		ldrne	\irqnr, [\base, #IRQ_SIR_IRQ]
+		ldrne	\irqnr, [\base, #INTCPS_SIR_IRQ_OFFSET]
 
 		.endm
 
diff --git a/arch/arm/plat-omap/include/mach/gpmc.h b/arch/arm/plat-omap/include/mach/gpmc.h
index 3c7b425..45b6784 100644
--- a/arch/arm/plat-omap/include/mach/gpmc.h
+++ b/arch/arm/plat-omap/include/mach/gpmc.h
@@ -84,6 +84,10 @@
 	u16 access;		/* Start-cycle to first data valid delay */
 	u16 rd_cycle;		/* Total read cycle time */
 	u16 wr_cycle;		/* Total write cycle time */
+
+	/* The following are only on OMAP3430 */
+	u16 wr_access;		/* WRACCESSTIME */
+	u16 wr_data_mux_bus;	/* WRDATAONADMUXBUS */
 };
 
 extern unsigned int gpmc_ns_to_ticks(unsigned int time_ns);
diff --git a/arch/arm/plat-omap/include/mach/io.h b/arch/arm/plat-omap/include/mach/io.h
index dd0cf06..adc83b7 100644
--- a/arch/arm/plat-omap/include/mach/io.h
+++ b/arch/arm/plat-omap/include/mach/io.h
@@ -73,7 +73,6 @@
 #define L4_24XX_VIRT	0xd8000000
 #define L4_24XX_SIZE	SZ_1M		/* 1MB of 128MB used, want 1MB sect */
 
-#ifdef CONFIG_ARCH_OMAP2430
 #define L4_WK_243X_PHYS		L4_WK_243X_BASE		/* 0x49000000 */
 #define L4_WK_243X_VIRT		0xd9000000
 #define L4_WK_243X_SIZE		SZ_1M
@@ -87,8 +86,6 @@
 #define OMAP243X_SMS_VIRT	0xFC000000
 #define OMAP243X_SMS_SIZE	SZ_1M
 
-#endif
-
 #define IO_OFFSET		0x90000000
 #define __IO_ADDRESS(pa)	((pa) + IO_OFFSET)	/* Works for L3 and L4 */
 #define __OMAP2_IO_ADDRESS(pa)	((pa) + IO_OFFSET)	/* Works for L3 and L4 */
diff --git a/arch/arm/plat-omap/include/mach/irqs.h b/arch/arm/plat-omap/include/mach/irqs.h
index e9fd630..9ee0496 100644
--- a/arch/arm/plat-omap/include/mach/irqs.h
+++ b/arch/arm/plat-omap/include/mach/irqs.h
@@ -286,6 +286,41 @@
 #define INT_24XX_USB_IRQ_OTG	80
 #define INT_24XX_MMC_IRQ	83
 
+#define INT_34XX_BENCH_MPU_EMUL	3
+#define INT_34XX_ST_MCBSP2_IRQ	4
+#define INT_34XX_ST_MCBSP3_IRQ	5
+#define INT_34XX_SSM_ABORT_IRQ	6
+#define INT_34XX_SYS_NIRQ	7
+#define INT_34XX_D2D_FW_IRQ	8
+#define INT_34XX_PRCM_MPU_IRQ	11
+#define INT_34XX_MCBSP1_IRQ	16
+#define INT_34XX_MCBSP2_IRQ	17
+#define INT_34XX_MCBSP3_IRQ	22
+#define INT_34XX_MCBSP4_IRQ	23
+#define INT_34XX_CAM_IRQ	24
+#define INT_34XX_MCBSP5_IRQ	27
+#define INT_34XX_GPIO_BANK1	29
+#define INT_34XX_GPIO_BANK2	30
+#define INT_34XX_GPIO_BANK3	31
+#define INT_34XX_GPIO_BANK4	32
+#define INT_34XX_GPIO_BANK5	33
+#define INT_34XX_GPIO_BANK6	34
+#define INT_34XX_USIM_IRQ	35
+#define INT_34XX_WDT3_IRQ	36
+#define INT_34XX_SPI4_IRQ	48
+#define INT_34XX_SHA1MD52_IRQ	49
+#define INT_34XX_FPKA_READY_IRQ	50
+#define INT_34XX_SHA1MD51_IRQ	51
+#define INT_34XX_RNG_IRQ	52
+#define INT_34XX_I2C3_IRQ	61
+#define INT_34XX_FPKA_ERROR_IRQ	64
+#define INT_34XX_PBIAS_IRQ	75
+#define INT_34XX_OHCI_IRQ	76
+#define INT_34XX_EHCI_IRQ	77
+#define INT_34XX_TLL_IRQ	78
+#define INT_34XX_PARTHASH_IRQ	79
+#define INT_34XX_MMC3_IRQ	94
+#define INT_34XX_GPT12_IRQ	95
 /* Max. 128 level 2 IRQs (OMAP1610), 192 GPIOs (OMAP730) and
  * 16 MPUIO lines */
 #define OMAP_MAX_GPIO_LINES	192
diff --git a/arch/arm/plat-omap/include/mach/mcbsp.h b/arch/arm/plat-omap/include/mach/mcbsp.h
index a3074f2..c8d0aa1 100644
--- a/arch/arm/plat-omap/include/mach/mcbsp.h
+++ b/arch/arm/plat-omap/include/mach/mcbsp.h
@@ -91,7 +91,7 @@
 #define AUDIO_DMA_TX		OMAP_DMA_MCBSP1_TX
 #define AUDIO_DMA_RX		OMAP_DMA_MCBSP1_RX
 
-#elif defined(CONFIG_ARCH_OMAP24XX)
+#elif defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 
 #define OMAP_MCBSP_REG_DRR2	0x00
 #define OMAP_MCBSP_REG_DRR1	0x04
diff --git a/arch/arm/plat-omap/include/mach/memory.h b/arch/arm/plat-omap/include/mach/memory.h
index a325caf..d40cac6 100644
--- a/arch/arm/plat-omap/include/mach/memory.h
+++ b/arch/arm/plat-omap/include/mach/memory.h
@@ -38,7 +38,7 @@
  */
 #if defined(CONFIG_ARCH_OMAP1)
 #define PHYS_OFFSET		UL(0x10000000)
-#elif defined(CONFIG_ARCH_OMAP2)
+#elif defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
 #define PHYS_OFFSET		UL(0x80000000)
 #endif
 
diff --git a/arch/arm/plat-omap/include/mach/mux.h b/arch/arm/plat-omap/include/mach/mux.h
index 5670d56..6bbf178 100644
--- a/arch/arm/plat-omap/include/mach/mux.h
+++ b/arch/arm/plat-omap/include/mach/mux.h
@@ -723,7 +723,31 @@
 	AB12_3430_USB3HS_TLL_DATA4,
 	AB13_3430_USB3HS_TLL_DATA5,
 	AA13_3430_USB3HS_TLL_DATA6,
-	AA12_3430_USB3HS_TLL_DATA7
+	AA12_3430_USB3HS_TLL_DATA7,
+
+	/* PHY FSUSB: FS Serial for Port 1 (multiple PHY modes supported) */
+	AF10_3430_USB1FS_PHY_MM1_RXDP,
+	AG9_3430_USB1FS_PHY_MM1_RXDM,
+	W13_3430_USB1FS_PHY_MM1_RXRCV,
+	W12_3430_USB1FS_PHY_MM1_TXSE0,
+	W11_3430_USB1FS_PHY_MM1_TXDAT,
+	Y11_3430_USB1FS_PHY_MM1_TXEN_N,
+
+	/* PHY FSUSB: FS Serial for Port 2 (multiple PHY modes supported) */
+	AF7_3430_USB2FS_PHY_MM2_RXDP,
+	AH7_3430_USB2FS_PHY_MM2_RXDM,
+	AB10_3430_USB2FS_PHY_MM2_RXRCV,
+	AB9_3430_USB2FS_PHY_MM2_TXSE0,
+	W3_3430_USB2FS_PHY_MM2_TXDAT,
+	T4_3430_USB2FS_PHY_MM2_TXEN_N,
+
+	/* PHY FSUSB: FS Serial for Port 3 (multiple PHY modes supported) */
+	AH3_3430_USB3FS_PHY_MM3_RXDP,
+	AE3_3430_USB3FS_PHY_MM3_RXDM,
+	AD1_3430_USB3FS_PHY_MM3_RXRCV,
+	AE1_3430_USB3FS_PHY_MM3_TXSE0,
+	AD2_3430_USB3FS_PHY_MM3_TXDAT,
+	AC1_3430_USB3FS_PHY_MM3_TXEN_N,
 
 };
 
diff --git a/arch/arm/plat-omap/include/mach/omap24xx.h b/arch/arm/plat-omap/include/mach/omap24xx.h
index 556f0eb..24335d4 100644
--- a/arch/arm/plat-omap/include/mach/omap24xx.h
+++ b/arch/arm/plat-omap/include/mach/omap24xx.h
@@ -39,7 +39,6 @@
 /* interrupt controller */
 #define OMAP24XX_IC_BASE	(L4_24XX_BASE + 0xfe000)
 #define OMAP24XX_IVA_INTC_BASE	0x40000000
-#define IRQ_SIR_IRQ		0x0040
 
 #define OMAP2420_CTRL_BASE	L4_24XX_BASE
 #define OMAP2420_32KSYNCT_BASE	(L4_24XX_BASE + 0x4000)
diff --git a/arch/arm/plat-omap/include/mach/sdrc.h b/arch/arm/plat-omap/include/mach/sdrc.h
index 25ee381..a98c6c3 100644
--- a/arch/arm/plat-omap/include/mach/sdrc.h
+++ b/arch/arm/plat-omap/include/mach/sdrc.h
@@ -25,8 +25,8 @@
 #define SDRC_DLLB_STATUS	0x06C
 #define SDRC_POWER		0x070
 #define SDRC_MR_0		0x084
-#define SDRC_ACTIM_CTRL_A	0x09c
-#define SDRC_ACTIM_CTRL_B	0x0a0
+#define SDRC_ACTIM_CTRL_A_0	0x09c
+#define SDRC_ACTIM_CTRL_B_0	0x0a0
 #define SDRC_RFR_CTRL_0		0x0a4
 
 /*
diff --git a/arch/arm/plat-omap/include/mach/sram.h b/arch/arm/plat-omap/include/mach/sram.h
index e093234..ab35d62 100644
--- a/arch/arm/plat-omap/include/mach/sram.h
+++ b/arch/arm/plat-omap/include/mach/sram.h
@@ -21,6 +21,10 @@
 				      u32 mem_type);
 extern u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
 
+extern u32 omap3_configure_core_dpll(u32 sdrc_rfr_ctrl,
+				     u32 sdrc_actim_ctrla,
+				     u32 sdrc_actim_ctrlb, u32 m2);
+
 /* Do not use these */
 extern void omap1_sram_reprogram_clock(u32 ckctl, u32 dpllctl);
 extern unsigned long omap1_sram_reprogram_clock_sz;
@@ -53,4 +57,10 @@
 						u32 mem_type);
 extern unsigned long omap243x_sram_reprogram_sdrc_sz;
 
+
+extern u32 omap3_sram_configure_core_dpll(u32 sdrc_rfr_ctrl,
+					  u32 sdrc_actim_ctrla,
+					  u32 sdrc_actim_ctrlb, u32 m2);
+extern unsigned long omap3_sram_configure_core_dpll_sz;
+
 #endif
diff --git a/arch/arm/plat-omap/include/mach/system.h b/arch/arm/plat-omap/include/mach/system.h
index 06a28c7..06923f2 100644
--- a/arch/arm/plat-omap/include/mach/system.h
+++ b/arch/arm/plat-omap/include/mach/system.h
@@ -40,7 +40,7 @@
 
 static inline void arch_reset(char mode)
 {
-	if (!cpu_is_omap24xx())
+	if (!cpu_class_is_omap2())
 		omap1_arch_reset(mode);
 	else
 		omap_prcm_arch_reset(mode);
diff --git a/arch/arm/plat-omap/io.c b/arch/arm/plat-omap/io.c
index 0253c45..af326ef 100644
--- a/arch/arm/plat-omap/io.c
+++ b/arch/arm/plat-omap/io.c
@@ -47,11 +47,13 @@
 	}
 #endif
 #ifdef CONFIG_ARCH_OMAP2
-	if (cpu_class_is_omap2()) {
+	if (cpu_is_omap24xx()) {
 		if (BETWEEN(p, L3_24XX_PHYS, L3_24XX_SIZE))
 			return XLATE(p, L3_24XX_PHYS, L3_24XX_VIRT);
 		if (BETWEEN(p, L4_24XX_PHYS, L4_24XX_SIZE))
 			return XLATE(p, L4_24XX_PHYS, L4_24XX_VIRT);
+	}
+	if (cpu_is_omap2420()) {
 		if (BETWEEN(p, DSP_MEM_24XX_PHYS, DSP_MEM_24XX_SIZE))
 			return XLATE(p, DSP_MEM_24XX_PHYS, DSP_MEM_24XX_VIRT);
 		if (BETWEEN(p, DSP_IPI_24XX_PHYS, DSP_IPI_24XX_SIZE))
@@ -59,14 +61,36 @@
 		if (BETWEEN(p, DSP_MMU_24XX_PHYS, DSP_MMU_24XX_SIZE))
 			return XLATE(p, DSP_MMU_24XX_PHYS, DSP_MMU_24XX_VIRT);
 	}
-#ifdef CONFIG_ARCH_OMAP2430
 	if (cpu_is_omap2430()) {
 		if (BETWEEN(p, L4_WK_243X_PHYS, L4_WK_243X_SIZE))
-			return XLATE(L4_WK_243X_PHYS, L4_WK_243X_VIRT);
+			return XLATE(p, L4_WK_243X_PHYS, L4_WK_243X_VIRT);
 		if (BETWEEN(p, OMAP243X_GPMC_PHYS, OMAP243X_GPMC_SIZE))
-			return XLATE(OMAP243X_GPMC_PHYS, OMAP243X_GPMC_VIRT);
+			return XLATE(p, OMAP243X_GPMC_PHYS, OMAP243X_GPMC_VIRT);
+		if (BETWEEN(p, OMAP243X_SDRC_PHYS, OMAP243X_SDRC_SIZE))
+			return XLATE(p, OMAP243X_SDRC_PHYS, OMAP243X_SDRC_VIRT);
+		if (BETWEEN(p, OMAP243X_SMS_PHYS, OMAP243X_SMS_SIZE))
+			return XLATE(p, OMAP243X_SMS_PHYS, OMAP243X_SMS_VIRT);
 	}
 #endif
+#ifdef CONFIG_ARCH_OMAP3
+	if (cpu_is_omap34xx()) {
+		if (BETWEEN(p, L3_34XX_PHYS, L3_34XX_SIZE))
+			return XLATE(p, L3_34XX_PHYS, L3_34XX_VIRT);
+		if (BETWEEN(p, L4_34XX_PHYS, L4_34XX_SIZE))
+			return XLATE(p, L4_34XX_PHYS, L4_34XX_VIRT);
+		if (BETWEEN(p, L4_WK_34XX_PHYS, L4_WK_34XX_SIZE))
+			return XLATE(p, L4_WK_34XX_PHYS, L4_WK_34XX_VIRT);
+		if (BETWEEN(p, OMAP34XX_GPMC_PHYS, OMAP34XX_GPMC_SIZE))
+			return XLATE(p, OMAP34XX_GPMC_PHYS, OMAP34XX_GPMC_VIRT);
+		if (BETWEEN(p, OMAP343X_SMS_PHYS, OMAP343X_SMS_SIZE))
+			return XLATE(p, OMAP343X_SMS_PHYS, OMAP343X_SMS_VIRT);
+		if (BETWEEN(p, OMAP343X_SDRC_PHYS, OMAP343X_SDRC_SIZE))
+			return XLATE(p, OMAP343X_SDRC_PHYS, OMAP343X_SDRC_VIRT);
+		if (BETWEEN(p, L4_PER_34XX_PHYS, L4_PER_34XX_SIZE))
+			return XLATE(p, L4_PER_34XX_PHYS, L4_PER_34XX_VIRT);
+		if (BETWEEN(p, L4_EMU_34XX_PHYS, L4_EMU_34XX_SIZE))
+			return XLATE(p, L4_EMU_34XX_PHYS, L4_EMU_34XX_VIRT);
+	}
 #endif
 
 	return __arm_ioremap(p, size, type);
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index ac67eeb..4d22452 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -271,7 +271,7 @@
 #define omap1_sram_init()	do {} while (0)
 #endif
 
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+#if defined(CONFIG_ARCH_OMAP2)
 
 static void (*_omap2_sram_ddr_init)(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
 			      u32 base_cs, u32 force_unlock);
@@ -352,23 +352,19 @@
 
 #ifdef CONFIG_ARCH_OMAP3
 
-static u32 (*_omap2_sram_reprogram_gpmc)(u32 perf_level);
-u32 omap2_sram_reprogram_gpmc(u32 perf_level)
+static u32 (*_omap3_sram_configure_core_dpll)(u32 sdrc_rfr_ctrl,
+					      u32 sdrc_actim_ctrla,
+					      u32 sdrc_actim_ctrlb,
+					      u32 m2);
+u32 omap3_configure_core_dpll(u32 sdrc_rfr_ctrl, u32 sdrc_actim_ctrla,
+			      u32 sdrc_actim_ctrlb, u32 m2)
 {
-	if (!_omap2_sram_reprogram_gpmc)
+	if (!_omap3_sram_configure_core_dpll)
 		omap_sram_error();
 
-	return _omap2_sram_reprogram_gpmc(perf_level);
-}
-
-static u32 (*_omap2_sram_configure_core_dpll)(u32 m, u32 n,
-						u32 freqsel, u32 m2);
-u32 omap2_sram_configure_core_dpll(u32 m, u32 n, u32 freqsel, u32 m2)
-{
-	if (!_omap2_sram_configure_core_dpll)
-		omap_sram_error();
-
-	return _omap2_sram_configure_core_dpll(m, n, freqsel, m2);
+	return _omap3_sram_configure_core_dpll(sdrc_rfr_ctrl,
+					       sdrc_actim_ctrla,
+					       sdrc_actim_ctrlb, m2);
 }
 
 /* REVISIT: Should this be same as omap34xx_sram_init() after off-idle? */
@@ -376,31 +372,16 @@
 {
 	omap_sram_ceil = omap_sram_base + omap_sram_size;
 
-	_omap2_sram_reprogram_gpmc = omap_sram_push(omap34xx_sram_reprogram_gpmc,
-		omap34xx_sram_reprogram_gpmc_sz);
-
-	_omap2_sram_configure_core_dpll =
-			omap_sram_push(omap34xx_sram_configure_core_dpll,
-					omap34xx_sram_configure_core_dpll_sz);
+	_omap3_sram_configure_core_dpll =
+		omap_sram_push(omap3_sram_configure_core_dpll,
+			       omap3_sram_configure_core_dpll_sz);
 }
 
 int __init omap34xx_sram_init(void)
 {
-	_omap2_sram_ddr_init = omap_sram_push(omap34xx_sram_ddr_init,
-					omap34xx_sram_ddr_init_sz);
-
-	_omap2_sram_reprogram_sdrc = omap_sram_push(omap34xx_sram_reprogram_sdrc,
-					omap34xx_sram_reprogram_sdrc_sz);
-
-	_omap2_set_prcm = omap_sram_push(omap34xx_sram_set_prcm,
-					omap34xx_sram_set_prcm_sz);
-
-	_omap2_sram_reprogram_gpmc = omap_sram_push(omap34xx_sram_reprogram_gpmc,
-					omap34xx_sram_reprogram_gpmc_sz);
-
-	_omap2_sram_configure_core_dpll =
-				omap_sram_push(omap34xx_sram_configure_core_dpll,
-					omap34xx_sram_configure_core_dpll_sz);
+	_omap3_sram_configure_core_dpll =
+		omap_sram_push(omap3_sram_configure_core_dpll,
+			       omap3_sram_configure_core_dpll_sz);
 
 	return 0;
 }