| /****************************************************************************** | 
 | * This software may be used and distributed according to the terms of | 
 | * the GNU General Public License (GPL), incorporated herein by reference. | 
 | * Drivers based on or derived from this code fall under the GPL and must | 
 | * retain the authorship, copyright and license notice.  This file is not | 
 | * a complete program and may only be used when the entire operating | 
 | * system is licensed under the GPL. | 
 | * See the file COPYING in this distribution for more information. | 
 | * | 
 | * vxge-main.c: Driver for Neterion Inc's X3100 Series 10GbE PCIe I/O | 
 | *              Virtualized Server Adapter. | 
 | * Copyright(c) 2002-2009 Neterion Inc. | 
 | * | 
 | * The module loadable parameters that are supported by the driver and a brief | 
 | * explanation of all the variables: | 
 | * vlan_tag_strip: | 
 | *	Strip VLAN Tag enable/disable. Instructs the device to remove | 
 | *	the VLAN tag from all received tagged frames that are not | 
 | *	replicated at the internal L2 switch. | 
 | *		0 - Do not strip the VLAN tag. | 
 | *		1 - Strip the VLAN tag. | 
 | * | 
 | * addr_learn_en: | 
 | *	Enable learning the mac address of the guest OS interface in | 
 | *	a virtualization environment. | 
 | *		0 - DISABLE | 
 | *		1 - ENABLE | 
 | * | 
 | * max_config_port: | 
 | *	Maximum number of port to be supported. | 
 | *		MIN -1 and MAX - 2 | 
 | * | 
 | * max_config_vpath: | 
 | *	This configures the maximum no of VPATH configures for each | 
 | * 	device function. | 
 | *		MIN - 1 and MAX - 17 | 
 | * | 
 | * max_config_dev: | 
 | *	This configures maximum no of Device function to be enabled. | 
 | *		MIN - 1 and MAX - 17 | 
 | * | 
 | ******************************************************************************/ | 
 |  | 
 | #include <linux/if_vlan.h> | 
 | #include <linux/pci.h> | 
 | #include <linux/tcp.h> | 
 | #include <net/ip.h> | 
 | #include <linux/netdevice.h> | 
 | #include <linux/etherdevice.h> | 
 | #include "vxge-main.h" | 
 | #include "vxge-reg.h" | 
 |  | 
 | MODULE_LICENSE("Dual BSD/GPL"); | 
 | MODULE_DESCRIPTION("Neterion's X3100 Series 10GbE PCIe I/O" | 
 | 	"Virtualized Server Adapter"); | 
 |  | 
 | static struct pci_device_id vxge_id_table[] __devinitdata = { | 
 | 	{PCI_VENDOR_ID_S2IO, PCI_DEVICE_ID_TITAN_WIN, PCI_ANY_ID, | 
 | 	PCI_ANY_ID}, | 
 | 	{PCI_VENDOR_ID_S2IO, PCI_DEVICE_ID_TITAN_UNI, PCI_ANY_ID, | 
 | 	PCI_ANY_ID}, | 
 | 	{0} | 
 | }; | 
 |  | 
 | MODULE_DEVICE_TABLE(pci, vxge_id_table); | 
 |  | 
 | VXGE_MODULE_PARAM_INT(vlan_tag_strip, VXGE_HW_VPATH_RPA_STRIP_VLAN_TAG_ENABLE); | 
 | VXGE_MODULE_PARAM_INT(addr_learn_en, VXGE_HW_MAC_ADDR_LEARN_DEFAULT); | 
 | VXGE_MODULE_PARAM_INT(max_config_port, VXGE_MAX_CONFIG_PORT); | 
 | VXGE_MODULE_PARAM_INT(max_config_vpath, VXGE_USE_DEFAULT); | 
 | VXGE_MODULE_PARAM_INT(max_mac_vpath, VXGE_MAX_MAC_ADDR_COUNT); | 
 | VXGE_MODULE_PARAM_INT(max_config_dev, VXGE_MAX_CONFIG_DEV); | 
 |  | 
 | static u16 vpath_selector[VXGE_HW_MAX_VIRTUAL_PATHS] = | 
 | 		{0, 1, 3, 3, 7, 7, 7, 7, 15, 15, 15, 15, 15, 15, 15, 15, 31}; | 
 | static unsigned int bw_percentage[VXGE_HW_MAX_VIRTUAL_PATHS] = | 
 | 	{[0 ...(VXGE_HW_MAX_VIRTUAL_PATHS - 1)] = 0xFF}; | 
 | module_param_array(bw_percentage, uint, NULL, 0); | 
 |  | 
 | static struct vxge_drv_config *driver_config; | 
 |  | 
 | static inline int is_vxge_card_up(struct vxgedev *vdev) | 
 | { | 
 | 	return test_bit(__VXGE_STATE_CARD_UP, &vdev->state); | 
 | } | 
 |  | 
 | static inline void VXGE_COMPLETE_VPATH_TX(struct vxge_fifo *fifo) | 
 | { | 
 | 	unsigned long flags = 0; | 
 | 	struct sk_buff **skb_ptr = NULL; | 
 | 	struct sk_buff **temp; | 
 | #define NR_SKB_COMPLETED 128 | 
 | 	struct sk_buff *completed[NR_SKB_COMPLETED]; | 
 | 	int more; | 
 |  | 
 | 	do { | 
 | 		more = 0; | 
 | 		skb_ptr = completed; | 
 |  | 
 | 		if (spin_trylock_irqsave(&fifo->tx_lock, flags)) { | 
 | 			vxge_hw_vpath_poll_tx(fifo->handle, &skb_ptr, | 
 | 						NR_SKB_COMPLETED, &more); | 
 | 			spin_unlock_irqrestore(&fifo->tx_lock, flags); | 
 | 		} | 
 | 		/* free SKBs */ | 
 | 		for (temp = completed; temp != skb_ptr; temp++) | 
 | 			dev_kfree_skb_irq(*temp); | 
 | 	} while (more) ; | 
 | } | 
 |  | 
 | static inline void VXGE_COMPLETE_ALL_TX(struct vxgedev *vdev) | 
 | { | 
 | 	int i; | 
 |  | 
 | 	/* Complete all transmits */ | 
 | 	for (i = 0; i < vdev->no_of_vpath; i++) | 
 | 		VXGE_COMPLETE_VPATH_TX(&vdev->vpaths[i].fifo); | 
 | } | 
 |  | 
 | static inline void VXGE_COMPLETE_ALL_RX(struct vxgedev *vdev) | 
 | { | 
 | 	int i; | 
 | 	struct vxge_ring *ring; | 
 |  | 
 | 	/* Complete all receives*/ | 
 | 	for (i = 0; i < vdev->no_of_vpath; i++) { | 
 | 		ring = &vdev->vpaths[i].ring; | 
 | 		vxge_hw_vpath_poll_rx(ring->handle); | 
 | 	} | 
 | } | 
 |  | 
 | /* | 
 |  * MultiQ manipulation helper functions | 
 |  */ | 
 | void vxge_stop_all_tx_queue(struct vxgedev *vdev) | 
 | { | 
 | 	int i; | 
 | 	struct net_device *dev = vdev->ndev; | 
 |  | 
 | 	if (vdev->config.tx_steering_type != TX_MULTIQ_STEERING) { | 
 | 		for (i = 0; i < vdev->no_of_vpath; i++) | 
 | 			vdev->vpaths[i].fifo.queue_state = VPATH_QUEUE_STOP; | 
 | 	} | 
 | 	netif_tx_stop_all_queues(dev); | 
 | } | 
 |  | 
 | void vxge_stop_tx_queue(struct vxge_fifo *fifo) | 
 | { | 
 | 	struct net_device *dev = fifo->ndev; | 
 |  | 
 | 	struct netdev_queue *txq = NULL; | 
 | 	if (fifo->tx_steering_type == TX_MULTIQ_STEERING) | 
 | 		txq = netdev_get_tx_queue(dev, fifo->driver_id); | 
 | 	else { | 
 | 		txq = netdev_get_tx_queue(dev, 0); | 
 | 		fifo->queue_state = VPATH_QUEUE_STOP; | 
 | 	} | 
 |  | 
 | 	netif_tx_stop_queue(txq); | 
 | } | 
 |  | 
 | void vxge_start_all_tx_queue(struct vxgedev *vdev) | 
 | { | 
 | 	int i; | 
 | 	struct net_device *dev = vdev->ndev; | 
 |  | 
 | 	if (vdev->config.tx_steering_type != TX_MULTIQ_STEERING) { | 
 | 		for (i = 0; i < vdev->no_of_vpath; i++) | 
 | 			vdev->vpaths[i].fifo.queue_state = VPATH_QUEUE_START; | 
 | 	} | 
 | 	netif_tx_start_all_queues(dev); | 
 | } | 
 |  | 
 | static void vxge_wake_all_tx_queue(struct vxgedev *vdev) | 
 | { | 
 | 	int i; | 
 | 	struct net_device *dev = vdev->ndev; | 
 |  | 
 | 	if (vdev->config.tx_steering_type != TX_MULTIQ_STEERING) { | 
 | 		for (i = 0; i < vdev->no_of_vpath; i++) | 
 | 			vdev->vpaths[i].fifo.queue_state = VPATH_QUEUE_START; | 
 | 	} | 
 | 	netif_tx_wake_all_queues(dev); | 
 | } | 
 |  | 
 | void vxge_wake_tx_queue(struct vxge_fifo *fifo, struct sk_buff *skb) | 
 | { | 
 | 	struct net_device *dev = fifo->ndev; | 
 |  | 
 | 	int vpath_no = fifo->driver_id; | 
 | 	struct netdev_queue *txq = NULL; | 
 | 	if (fifo->tx_steering_type == TX_MULTIQ_STEERING) { | 
 | 		txq = netdev_get_tx_queue(dev, vpath_no); | 
 | 		if (netif_tx_queue_stopped(txq)) | 
 | 			netif_tx_wake_queue(txq); | 
 | 	} else { | 
 | 		txq = netdev_get_tx_queue(dev, 0); | 
 | 		if (fifo->queue_state == VPATH_QUEUE_STOP) | 
 | 			if (netif_tx_queue_stopped(txq)) { | 
 | 				fifo->queue_state = VPATH_QUEUE_START; | 
 | 				netif_tx_wake_queue(txq); | 
 | 			} | 
 | 	} | 
 | } | 
 |  | 
 | /* | 
 |  * vxge_callback_link_up | 
 |  * | 
 |  * This function is called during interrupt context to notify link up state | 
 |  * change. | 
 |  */ | 
 | void | 
 | vxge_callback_link_up(struct __vxge_hw_device *hldev) | 
 | { | 
 | 	struct net_device *dev = hldev->ndev; | 
 | 	struct vxgedev *vdev = (struct vxgedev *)netdev_priv(dev); | 
 |  | 
 | 	vxge_debug_entryexit(VXGE_TRACE, "%s: %s:%d", | 
 | 		vdev->ndev->name, __func__, __LINE__); | 
 | 	printk(KERN_NOTICE "%s: Link Up\n", vdev->ndev->name); | 
 | 	vdev->stats.link_up++; | 
 |  | 
 | 	netif_carrier_on(vdev->ndev); | 
 | 	vxge_wake_all_tx_queue(vdev); | 
 |  | 
 | 	vxge_debug_entryexit(VXGE_TRACE, | 
 | 		"%s: %s:%d Exiting...", vdev->ndev->name, __func__, __LINE__); | 
 | } | 
 |  | 
 | /* | 
 |  * vxge_callback_link_down | 
 |  * | 
 |  * This function is called during interrupt context to notify link down state | 
 |  * change. | 
 |  */ | 
 | void | 
 | vxge_callback_link_down(struct __vxge_hw_device *hldev) | 
 | { | 
 | 	struct net_device *dev = hldev->ndev; | 
 | 	struct vxgedev *vdev = (struct vxgedev *)netdev_priv(dev); | 
 |  | 
 | 	vxge_debug_entryexit(VXGE_TRACE, | 
 | 		"%s: %s:%d", vdev->ndev->name, __func__, __LINE__); | 
 | 	printk(KERN_NOTICE "%s: Link Down\n", vdev->ndev->name); | 
 |  | 
 | 	vdev->stats.link_down++; | 
 | 	netif_carrier_off(vdev->ndev); | 
 | 	vxge_stop_all_tx_queue(vdev); | 
 |  | 
 | 	vxge_debug_entryexit(VXGE_TRACE, | 
 | 		"%s: %s:%d Exiting...", vdev->ndev->name, __func__, __LINE__); | 
 | } | 
 |  | 
 | /* | 
 |  * vxge_rx_alloc | 
 |  * | 
 |  * Allocate SKB. | 
 |  */ | 
 | static struct sk_buff* | 
 | vxge_rx_alloc(void *dtrh, struct vxge_ring *ring, const int skb_size) | 
 | { | 
 | 	struct net_device    *dev; | 
 | 	struct sk_buff       *skb; | 
 | 	struct vxge_rx_priv *rx_priv; | 
 |  | 
 | 	dev = ring->ndev; | 
 | 	vxge_debug_entryexit(VXGE_TRACE, "%s: %s:%d", | 
 | 		ring->ndev->name, __func__, __LINE__); | 
 |  | 
 | 	rx_priv = vxge_hw_ring_rxd_private_get(dtrh); | 
 |  | 
 | 	/* try to allocate skb first. this one may fail */ | 
 | 	skb = netdev_alloc_skb(dev, skb_size + | 
 | 	VXGE_HW_HEADER_ETHERNET_II_802_3_ALIGN); | 
 | 	if (skb == NULL) { | 
 | 		vxge_debug_mem(VXGE_ERR, | 
 | 			"%s: out of memory to allocate SKB", dev->name); | 
 | 		ring->stats.skb_alloc_fail++; | 
 | 		return NULL; | 
 | 	} | 
 |  | 
 | 	vxge_debug_mem(VXGE_TRACE, | 
 | 		"%s: %s:%d  Skb : 0x%p", ring->ndev->name, | 
 | 		__func__, __LINE__, skb); | 
 |  | 
 | 	skb_reserve(skb, VXGE_HW_HEADER_ETHERNET_II_802_3_ALIGN); | 
 |  | 
 | 	rx_priv->skb = skb; | 
 | 	rx_priv->skb_data = NULL; | 
 | 	rx_priv->data_size = skb_size; | 
 | 	vxge_debug_entryexit(VXGE_TRACE, | 
 | 		"%s: %s:%d Exiting...", ring->ndev->name, __func__, __LINE__); | 
 |  | 
 | 	return skb; | 
 | } | 
 |  | 
 | /* | 
 |  * vxge_rx_map | 
 |  */ | 
 | static int vxge_rx_map(void *dtrh, struct vxge_ring *ring) | 
 | { | 
 | 	struct vxge_rx_priv *rx_priv; | 
 | 	dma_addr_t dma_addr; | 
 |  | 
 | 	vxge_debug_entryexit(VXGE_TRACE, "%s: %s:%d", | 
 | 		ring->ndev->name, __func__, __LINE__); | 
 | 	rx_priv = vxge_hw_ring_rxd_private_get(dtrh); | 
 |  | 
 | 	rx_priv->skb_data = rx_priv->skb->data; | 
 | 	dma_addr = pci_map_single(ring->pdev, rx_priv->skb_data, | 
 | 				rx_priv->data_size, PCI_DMA_FROMDEVICE); | 
 |  | 
 | 	if (dma_addr == 0) { | 
 | 		ring->stats.pci_map_fail++; | 
 | 		return -EIO; | 
 | 	} | 
 | 	vxge_debug_mem(VXGE_TRACE, | 
 | 		"%s: %s:%d  1 buffer mode dma_addr = 0x%llx", | 
 | 		ring->ndev->name, __func__, __LINE__, | 
 | 		(unsigned long long)dma_addr); | 
 | 	vxge_hw_ring_rxd_1b_set(dtrh, dma_addr, rx_priv->data_size); | 
 |  | 
 | 	rx_priv->data_dma = dma_addr; | 
 | 	vxge_debug_entryexit(VXGE_TRACE, | 
 | 		"%s: %s:%d Exiting...", ring->ndev->name, __func__, __LINE__); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * vxge_rx_initial_replenish | 
 |  * Allocation of RxD as an initial replenish procedure. | 
 |  */ | 
 | static enum vxge_hw_status | 
 | vxge_rx_initial_replenish(void *dtrh, void *userdata) | 
 | { | 
 | 	struct vxge_ring *ring = (struct vxge_ring *)userdata; | 
 | 	struct vxge_rx_priv *rx_priv; | 
 |  | 
 | 	vxge_debug_entryexit(VXGE_TRACE, "%s: %s:%d", | 
 | 		ring->ndev->name, __func__, __LINE__); | 
 | 	if (vxge_rx_alloc(dtrh, ring, | 
 | 			  VXGE_LL_MAX_FRAME_SIZE(ring->ndev)) == NULL) | 
 | 		return VXGE_HW_FAIL; | 
 |  | 
 | 	if (vxge_rx_map(dtrh, ring)) { | 
 | 		rx_priv = vxge_hw_ring_rxd_private_get(dtrh); | 
 | 		dev_kfree_skb(rx_priv->skb); | 
 |  | 
 | 		return VXGE_HW_FAIL; | 
 | 	} | 
 | 	vxge_debug_entryexit(VXGE_TRACE, | 
 | 		"%s: %s:%d Exiting...", ring->ndev->name, __func__, __LINE__); | 
 |  | 
 | 	return VXGE_HW_OK; | 
 | } | 
 |  | 
 | static inline void | 
 | vxge_rx_complete(struct vxge_ring *ring, struct sk_buff *skb, u16 vlan, | 
 | 		 int pkt_length, struct vxge_hw_ring_rxd_info *ext_info) | 
 | { | 
 |  | 
 | 	vxge_debug_entryexit(VXGE_TRACE, "%s: %s:%d", | 
 | 			ring->ndev->name, __func__, __LINE__); | 
 | 	skb_record_rx_queue(skb, ring->driver_id); | 
 | 	skb->protocol = eth_type_trans(skb, ring->ndev); | 
 |  | 
 | 	ring->stats.rx_frms++; | 
 | 	ring->stats.rx_bytes += pkt_length; | 
 |  | 
 | 	if (skb->pkt_type == PACKET_MULTICAST) | 
 | 		ring->stats.rx_mcast++; | 
 |  | 
 | 	vxge_debug_rx(VXGE_TRACE, | 
 | 		"%s: %s:%d  skb protocol = %d", | 
 | 		ring->ndev->name, __func__, __LINE__, skb->protocol); | 
 |  | 
 | 	if (ring->gro_enable) { | 
 | 		if (ring->vlgrp && ext_info->vlan && | 
 | 			(ring->vlan_tag_strip == | 
 | 				VXGE_HW_VPATH_RPA_STRIP_VLAN_TAG_ENABLE)) | 
 | 			vlan_gro_receive(ring->napi_p, ring->vlgrp, | 
 | 					ext_info->vlan, skb); | 
 | 		else | 
 | 			napi_gro_receive(ring->napi_p, skb); | 
 | 	} else { | 
 | 		if (ring->vlgrp && vlan && | 
 | 			(ring->vlan_tag_strip == | 
 | 				VXGE_HW_VPATH_RPA_STRIP_VLAN_TAG_ENABLE)) | 
 | 			vlan_hwaccel_receive_skb(skb, ring->vlgrp, vlan); | 
 | 		else | 
 | 			netif_receive_skb(skb); | 
 | 	} | 
 | 	vxge_debug_entryexit(VXGE_TRACE, | 
 | 		"%s: %s:%d Exiting...", ring->ndev->name, __func__, __LINE__); | 
 | } | 
 |  | 
 | static inline void vxge_re_pre_post(void *dtr, struct vxge_ring *ring, | 
 | 				    struct vxge_rx_priv *rx_priv) | 
 | { | 
 | 	pci_dma_sync_single_for_device(ring->pdev, | 
 | 		rx_priv->data_dma, rx_priv->data_size, PCI_DMA_FROMDEVICE); | 
 |  | 
 | 	vxge_hw_ring_rxd_1b_set(dtr, rx_priv->data_dma, rx_priv->data_size); | 
 | 	vxge_hw_ring_rxd_pre_post(ring->handle, dtr); | 
 | } | 
 |  | 
 | static inline void vxge_post(int *dtr_cnt, void **first_dtr, | 
 | 			     void *post_dtr, struct __vxge_hw_ring *ringh) | 
 | { | 
 | 	int dtr_count = *dtr_cnt; | 
 | 	if ((*dtr_cnt % VXGE_HW_RXSYNC_FREQ_CNT) == 0) { | 
 | 		if (*first_dtr) | 
 | 			vxge_hw_ring_rxd_post_post_wmb(ringh, *first_dtr); | 
 | 		*first_dtr = post_dtr; | 
 | 	} else | 
 | 		vxge_hw_ring_rxd_post_post(ringh, post_dtr); | 
 | 	dtr_count++; | 
 | 	*dtr_cnt = dtr_count; | 
 | } | 
 |  | 
 | /* | 
 |  * vxge_rx_1b_compl | 
 |  * | 
 |  * If the interrupt is because of a received frame or if the receive ring | 
 |  * contains fresh as yet un-processed frames, this function is called. | 
 |  */ | 
 | enum vxge_hw_status | 
 | vxge_rx_1b_compl(struct __vxge_hw_ring *ringh, void *dtr, | 
 | 		 u8 t_code, void *userdata) | 
 | { | 
 | 	struct vxge_ring *ring = (struct vxge_ring *)userdata; | 
 | 	struct  net_device *dev = ring->ndev; | 
 | 	unsigned int dma_sizes; | 
 | 	void *first_dtr = NULL; | 
 | 	int dtr_cnt = 0; | 
 | 	int data_size; | 
 | 	dma_addr_t data_dma; | 
 | 	int pkt_length; | 
 | 	struct sk_buff *skb; | 
 | 	struct vxge_rx_priv *rx_priv; | 
 | 	struct vxge_hw_ring_rxd_info ext_info; | 
 | 	vxge_debug_entryexit(VXGE_TRACE, "%s: %s:%d", | 
 | 		ring->ndev->name, __func__, __LINE__); | 
 | 	ring->pkts_processed = 0; | 
 |  | 
 | 	vxge_hw_ring_replenish(ringh, 0); | 
 |  | 
 | 	do { | 
 | 		prefetch((char *)dtr + L1_CACHE_BYTES); | 
 | 		rx_priv = vxge_hw_ring_rxd_private_get(dtr); | 
 | 		skb = rx_priv->skb; | 
 | 		data_size = rx_priv->data_size; | 
 | 		data_dma = rx_priv->data_dma; | 
 | 		prefetch(rx_priv->skb_data); | 
 |  | 
 | 		vxge_debug_rx(VXGE_TRACE, | 
 | 			"%s: %s:%d  skb = 0x%p", | 
 | 			ring->ndev->name, __func__, __LINE__, skb); | 
 |  | 
 | 		vxge_hw_ring_rxd_1b_get(ringh, dtr, &dma_sizes); | 
 | 		pkt_length = dma_sizes; | 
 |  | 
 | 		pkt_length -= ETH_FCS_LEN; | 
 |  | 
 | 		vxge_debug_rx(VXGE_TRACE, | 
 | 			"%s: %s:%d  Packet Length = %d", | 
 | 			ring->ndev->name, __func__, __LINE__, pkt_length); | 
 |  | 
 | 		vxge_hw_ring_rxd_1b_info_get(ringh, dtr, &ext_info); | 
 |  | 
 | 		/* check skb validity */ | 
 | 		vxge_assert(skb); | 
 |  | 
 | 		prefetch((char *)skb + L1_CACHE_BYTES); | 
 | 		if (unlikely(t_code)) { | 
 |  | 
 | 			if (vxge_hw_ring_handle_tcode(ringh, dtr, t_code) != | 
 | 				VXGE_HW_OK) { | 
 |  | 
 | 				ring->stats.rx_errors++; | 
 | 				vxge_debug_rx(VXGE_TRACE, | 
 | 					"%s: %s :%d Rx T_code is %d", | 
 | 					ring->ndev->name, __func__, | 
 | 					__LINE__, t_code); | 
 |  | 
 | 				/* If the t_code is not supported and if the | 
 | 				 * t_code is other than 0x5 (unparseable packet | 
 | 				 * such as unknown UPV6 header), Drop it !!! | 
 | 				 */ | 
 | 				vxge_re_pre_post(dtr, ring, rx_priv); | 
 |  | 
 | 				vxge_post(&dtr_cnt, &first_dtr, dtr, ringh); | 
 | 				ring->stats.rx_dropped++; | 
 | 				continue; | 
 | 			} | 
 | 		} | 
 |  | 
 | 		if (pkt_length > VXGE_LL_RX_COPY_THRESHOLD) { | 
 |  | 
 | 			if (vxge_rx_alloc(dtr, ring, data_size) != NULL) { | 
 |  | 
 | 				if (!vxge_rx_map(dtr, ring)) { | 
 | 					skb_put(skb, pkt_length); | 
 |  | 
 | 					pci_unmap_single(ring->pdev, data_dma, | 
 | 						data_size, PCI_DMA_FROMDEVICE); | 
 |  | 
 | 					vxge_hw_ring_rxd_pre_post(ringh, dtr); | 
 | 					vxge_post(&dtr_cnt, &first_dtr, dtr, | 
 | 						ringh); | 
 | 				} else { | 
 | 					dev_kfree_skb(rx_priv->skb); | 
 | 					rx_priv->skb = skb; | 
 | 					rx_priv->data_size = data_size; | 
 | 					vxge_re_pre_post(dtr, ring, rx_priv); | 
 |  | 
 | 					vxge_post(&dtr_cnt, &first_dtr, dtr, | 
 | 						ringh); | 
 | 					ring->stats.rx_dropped++; | 
 | 					break; | 
 | 				} | 
 | 			} else { | 
 | 				vxge_re_pre_post(dtr, ring, rx_priv); | 
 |  | 
 | 				vxge_post(&dtr_cnt, &first_dtr, dtr, ringh); | 
 | 				ring->stats.rx_dropped++; | 
 | 				break; | 
 | 			} | 
 | 		} else { | 
 | 			struct sk_buff *skb_up; | 
 |  | 
 | 			skb_up = netdev_alloc_skb(dev, pkt_length + | 
 | 				VXGE_HW_HEADER_ETHERNET_II_802_3_ALIGN); | 
 | 			if (skb_up != NULL) { | 
 | 				skb_reserve(skb_up, | 
 | 				    VXGE_HW_HEADER_ETHERNET_II_802_3_ALIGN); | 
 |  | 
 | 				pci_dma_sync_single_for_cpu(ring->pdev, | 
 | 					data_dma, data_size, | 
 | 					PCI_DMA_FROMDEVICE); | 
 |  | 
 | 				vxge_debug_mem(VXGE_TRACE, | 
 | 					"%s: %s:%d  skb_up = %p", | 
 | 					ring->ndev->name, __func__, | 
 | 					__LINE__, skb); | 
 | 				memcpy(skb_up->data, skb->data, pkt_length); | 
 |  | 
 | 				vxge_re_pre_post(dtr, ring, rx_priv); | 
 |  | 
 | 				vxge_post(&dtr_cnt, &first_dtr, dtr, | 
 | 					ringh); | 
 | 				/* will netif_rx small SKB instead */ | 
 | 				skb = skb_up; | 
 | 				skb_put(skb, pkt_length); | 
 | 			} else { | 
 | 				vxge_re_pre_post(dtr, ring, rx_priv); | 
 |  | 
 | 				vxge_post(&dtr_cnt, &first_dtr, dtr, ringh); | 
 | 				vxge_debug_rx(VXGE_ERR, | 
 | 					"%s: vxge_rx_1b_compl: out of " | 
 | 					"memory", dev->name); | 
 | 				ring->stats.skb_alloc_fail++; | 
 | 				break; | 
 | 			} | 
 | 		} | 
 |  | 
 | 		if ((ext_info.proto & VXGE_HW_FRAME_PROTO_TCP_OR_UDP) && | 
 | 		    !(ext_info.proto & VXGE_HW_FRAME_PROTO_IP_FRAG) && | 
 | 		    ring->rx_csum && /* Offload Rx side CSUM */ | 
 | 		    ext_info.l3_cksum == VXGE_HW_L3_CKSUM_OK && | 
 | 		    ext_info.l4_cksum == VXGE_HW_L4_CKSUM_OK) | 
 | 			skb->ip_summed = CHECKSUM_UNNECESSARY; | 
 | 		else | 
 | 			skb->ip_summed = CHECKSUM_NONE; | 
 |  | 
 | 		vxge_rx_complete(ring, skb, ext_info.vlan, | 
 | 			pkt_length, &ext_info); | 
 |  | 
 | 		ring->budget--; | 
 | 		ring->pkts_processed++; | 
 | 		if (!ring->budget) | 
 | 			break; | 
 |  | 
 | 	} while (vxge_hw_ring_rxd_next_completed(ringh, &dtr, | 
 | 		&t_code) == VXGE_HW_OK); | 
 |  | 
 | 	if (first_dtr) | 
 | 		vxge_hw_ring_rxd_post_post_wmb(ringh, first_dtr); | 
 |  | 
 | 	vxge_debug_entryexit(VXGE_TRACE, | 
 | 				"%s:%d  Exiting...", | 
 | 				__func__, __LINE__); | 
 | 	return VXGE_HW_OK; | 
 | } | 
 |  | 
 | /* | 
 |  * vxge_xmit_compl | 
 |  * | 
 |  * If an interrupt was raised to indicate DMA complete of the Tx packet, | 
 |  * this function is called. It identifies the last TxD whose buffer was | 
 |  * freed and frees all skbs whose data have already DMA'ed into the NICs | 
 |  * internal memory. | 
 |  */ | 
 | enum vxge_hw_status | 
 | vxge_xmit_compl(struct __vxge_hw_fifo *fifo_hw, void *dtr, | 
 | 		enum vxge_hw_fifo_tcode t_code, void *userdata, | 
 | 		struct sk_buff ***skb_ptr, int nr_skb, int *more) | 
 | { | 
 | 	struct vxge_fifo *fifo = (struct vxge_fifo *)userdata; | 
 | 	struct sk_buff *skb, **done_skb = *skb_ptr; | 
 | 	int pkt_cnt = 0; | 
 |  | 
 | 	vxge_debug_entryexit(VXGE_TRACE, | 
 | 		"%s:%d Entered....", __func__, __LINE__); | 
 |  | 
 | 	do { | 
 | 		int frg_cnt; | 
 | 		skb_frag_t *frag; | 
 | 		int i = 0, j; | 
 | 		struct vxge_tx_priv *txd_priv = | 
 | 			vxge_hw_fifo_txdl_private_get(dtr); | 
 |  | 
 | 		skb = txd_priv->skb; | 
 | 		frg_cnt = skb_shinfo(skb)->nr_frags; | 
 | 		frag = &skb_shinfo(skb)->frags[0]; | 
 |  | 
 | 		vxge_debug_tx(VXGE_TRACE, | 
 | 				"%s: %s:%d fifo_hw = %p dtr = %p " | 
 | 				"tcode = 0x%x", fifo->ndev->name, __func__, | 
 | 				__LINE__, fifo_hw, dtr, t_code); | 
 | 		/* check skb validity */ | 
 | 		vxge_assert(skb); | 
 | 		vxge_debug_tx(VXGE_TRACE, | 
 | 			"%s: %s:%d skb = %p itxd_priv = %p frg_cnt = %d", | 
 | 			fifo->ndev->name, __func__, __LINE__, | 
 | 			skb, txd_priv, frg_cnt); | 
 | 		if (unlikely(t_code)) { | 
 | 			fifo->stats.tx_errors++; | 
 | 			vxge_debug_tx(VXGE_ERR, | 
 | 				"%s: tx: dtr %p completed due to " | 
 | 				"error t_code %01x", fifo->ndev->name, | 
 | 				dtr, t_code); | 
 | 			vxge_hw_fifo_handle_tcode(fifo_hw, dtr, t_code); | 
 | 		} | 
 |  | 
 | 		/*  for unfragmented skb */ | 
 | 		pci_unmap_single(fifo->pdev, txd_priv->dma_buffers[i++], | 
 | 				skb_headlen(skb), PCI_DMA_TODEVICE); | 
 |  | 
 | 		for (j = 0; j < frg_cnt; j++) { | 
 | 			pci_unmap_page(fifo->pdev, | 
 | 					txd_priv->dma_buffers[i++], | 
 | 					frag->size, PCI_DMA_TODEVICE); | 
 | 			frag += 1; | 
 | 		} | 
 |  | 
 | 		vxge_hw_fifo_txdl_free(fifo_hw, dtr); | 
 |  | 
 | 		/* Updating the statistics block */ | 
 | 		fifo->stats.tx_frms++; | 
 | 		fifo->stats.tx_bytes += skb->len; | 
 |  | 
 | 		*done_skb++ = skb; | 
 |  | 
 | 		if (--nr_skb <= 0) { | 
 | 			*more = 1; | 
 | 			break; | 
 | 		} | 
 |  | 
 | 		pkt_cnt++; | 
 | 		if (pkt_cnt > fifo->indicate_max_pkts) | 
 | 			break; | 
 |  | 
 | 	} while (vxge_hw_fifo_txdl_next_completed(fifo_hw, | 
 | 				&dtr, &t_code) == VXGE_HW_OK); | 
 |  | 
 | 	*skb_ptr = done_skb; | 
 | 	vxge_wake_tx_queue(fifo, skb); | 
 |  | 
 | 	vxge_debug_entryexit(VXGE_TRACE, | 
 | 				"%s: %s:%d  Exiting...", | 
 | 				fifo->ndev->name, __func__, __LINE__); | 
 | 	return VXGE_HW_OK; | 
 | } | 
 |  | 
 | /* select a vpath to transmit the packet */ | 
 | static u32 vxge_get_vpath_no(struct vxgedev *vdev, struct sk_buff *skb, | 
 | 	int *do_lock) | 
 | { | 
 | 	u16 queue_len, counter = 0; | 
 | 	if (skb->protocol == htons(ETH_P_IP)) { | 
 | 		struct iphdr *ip; | 
 | 		struct tcphdr *th; | 
 |  | 
 | 		ip = ip_hdr(skb); | 
 |  | 
 | 		if ((ip->frag_off & htons(IP_OFFSET|IP_MF)) == 0) { | 
 | 			th = (struct tcphdr *)(((unsigned char *)ip) + | 
 | 					ip->ihl*4); | 
 |  | 
 | 			queue_len = vdev->no_of_vpath; | 
 | 			counter = (ntohs(th->source) + | 
 | 				ntohs(th->dest)) & | 
 | 				vdev->vpath_selector[queue_len - 1]; | 
 | 			if (counter >= queue_len) | 
 | 				counter = queue_len - 1; | 
 |  | 
 | 			if (ip->protocol == IPPROTO_UDP) { | 
 | #ifdef NETIF_F_LLTX | 
 | 				*do_lock = 0; | 
 | #endif | 
 | 			} | 
 | 		} | 
 | 	} | 
 | 	return counter; | 
 | } | 
 |  | 
 | static enum vxge_hw_status vxge_search_mac_addr_in_list( | 
 | 	struct vxge_vpath *vpath, u64 del_mac) | 
 | { | 
 | 	struct list_head *entry, *next; | 
 | 	list_for_each_safe(entry, next, &vpath->mac_addr_list) { | 
 | 		if (((struct vxge_mac_addrs *)entry)->macaddr == del_mac) | 
 | 			return TRUE; | 
 | 	} | 
 | 	return FALSE; | 
 | } | 
 |  | 
 | static int vxge_learn_mac(struct vxgedev *vdev, u8 *mac_header) | 
 | { | 
 | 	struct macInfo mac_info; | 
 | 	u8 *mac_address = NULL; | 
 | 	u64 mac_addr = 0, vpath_vector = 0; | 
 | 	int vpath_idx = 0; | 
 | 	enum vxge_hw_status status = VXGE_HW_OK; | 
 | 	struct vxge_vpath *vpath = NULL; | 
 | 	struct __vxge_hw_device *hldev; | 
 |  | 
 | 	hldev = (struct __vxge_hw_device *) pci_get_drvdata(vdev->pdev); | 
 |  | 
 | 	mac_address = (u8 *)&mac_addr; | 
 | 	memcpy(mac_address, mac_header, ETH_ALEN); | 
 |  | 
 | 	/* Is this mac address already in the list? */ | 
 | 	for (vpath_idx = 0; vpath_idx < vdev->no_of_vpath; vpath_idx++) { | 
 | 		vpath = &vdev->vpaths[vpath_idx]; | 
 | 		if (vxge_search_mac_addr_in_list(vpath, mac_addr)) | 
 | 			return vpath_idx; | 
 | 	} | 
 |  | 
 | 	memset(&mac_info, 0, sizeof(struct macInfo)); | 
 | 	memcpy(mac_info.macaddr, mac_header, ETH_ALEN); | 
 |  | 
 | 	/* Any vpath has room to add mac address to its da table? */ | 
 | 	for (vpath_idx = 0; vpath_idx < vdev->no_of_vpath; vpath_idx++) { | 
 | 		vpath = &vdev->vpaths[vpath_idx]; | 
 | 		if (vpath->mac_addr_cnt < vpath->max_mac_addr_cnt) { | 
 | 			/* Add this mac address to this vpath */ | 
 | 			mac_info.vpath_no = vpath_idx; | 
 | 			mac_info.state = VXGE_LL_MAC_ADDR_IN_DA_TABLE; | 
 | 			status = vxge_add_mac_addr(vdev, &mac_info); | 
 | 			if (status != VXGE_HW_OK) | 
 | 				return -EPERM; | 
 | 			return vpath_idx; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	mac_info.state = VXGE_LL_MAC_ADDR_IN_LIST; | 
 | 	vpath_idx = 0; | 
 | 	mac_info.vpath_no = vpath_idx; | 
 | 	/* Is the first vpath already selected as catch-basin ? */ | 
 | 	vpath = &vdev->vpaths[vpath_idx]; | 
 | 	if (vpath->mac_addr_cnt > vpath->max_mac_addr_cnt) { | 
 | 		/* Add this mac address to this vpath */ | 
 | 		if (FALSE == vxge_mac_list_add(vpath, &mac_info)) | 
 | 			return -EPERM; | 
 | 		return vpath_idx; | 
 | 	} | 
 |  | 
 | 	/* Select first vpath as catch-basin */ | 
 | 	vpath_vector = vxge_mBIT(vpath->device_id); | 
 | 	status = vxge_hw_mgmt_reg_write(vpath->vdev->devh, | 
 | 				vxge_hw_mgmt_reg_type_mrpcim, | 
 | 				0, | 
 | 				(ulong)offsetof( | 
 | 					struct vxge_hw_mrpcim_reg, | 
 | 					rts_mgr_cbasin_cfg), | 
 | 				vpath_vector); | 
 | 	if (status != VXGE_HW_OK) { | 
 | 		vxge_debug_tx(VXGE_ERR, | 
 | 			"%s: Unable to set the vpath-%d in catch-basin mode", | 
 | 			VXGE_DRIVER_NAME, vpath->device_id); | 
 | 		return -EPERM; | 
 | 	} | 
 |  | 
 | 	if (FALSE == vxge_mac_list_add(vpath, &mac_info)) | 
 | 		return -EPERM; | 
 |  | 
 | 	return vpath_idx; | 
 | } | 
 |  | 
 | /** | 
 |  * vxge_xmit | 
 |  * @skb : the socket buffer containing the Tx data. | 
 |  * @dev : device pointer. | 
 |  * | 
 |  * This function is the Tx entry point of the driver. Neterion NIC supports | 
 |  * certain protocol assist features on Tx side, namely  CSO, S/G, LSO. | 
 |  * NOTE: when device cant queue the pkt, just the trans_start variable will | 
 |  * not be upadted. | 
 | */ | 
 | static netdev_tx_t | 
 | vxge_xmit(struct sk_buff *skb, struct net_device *dev) | 
 | { | 
 | 	struct vxge_fifo *fifo = NULL; | 
 | 	void *dtr_priv; | 
 | 	void *dtr = NULL; | 
 | 	struct vxgedev *vdev = NULL; | 
 | 	enum vxge_hw_status status; | 
 | 	int frg_cnt, first_frg_len; | 
 | 	skb_frag_t *frag; | 
 | 	int i = 0, j = 0, avail; | 
 | 	u64 dma_pointer; | 
 | 	struct vxge_tx_priv *txdl_priv = NULL; | 
 | 	struct __vxge_hw_fifo *fifo_hw; | 
 | 	int offload_type; | 
 | 	unsigned long flags = 0; | 
 | 	int vpath_no = 0; | 
 | 	int do_spin_tx_lock = 1; | 
 |  | 
 | 	vxge_debug_entryexit(VXGE_TRACE, "%s: %s:%d", | 
 | 			dev->name, __func__, __LINE__); | 
 |  | 
 | 	/* A buffer with no data will be dropped */ | 
 | 	if (unlikely(skb->len <= 0)) { | 
 | 		vxge_debug_tx(VXGE_ERR, | 
 | 			"%s: Buffer has no data..", dev->name); | 
 | 		dev_kfree_skb(skb); | 
 | 		return NETDEV_TX_OK; | 
 | 	} | 
 |  | 
 | 	vdev = (struct vxgedev *)netdev_priv(dev); | 
 |  | 
 | 	if (unlikely(!is_vxge_card_up(vdev))) { | 
 | 		vxge_debug_tx(VXGE_ERR, | 
 | 			"%s: vdev not initialized", dev->name); | 
 | 		dev_kfree_skb(skb); | 
 | 		return NETDEV_TX_OK; | 
 | 	} | 
 |  | 
 | 	if (vdev->config.addr_learn_en) { | 
 | 		vpath_no = vxge_learn_mac(vdev, skb->data + ETH_ALEN); | 
 | 		if (vpath_no == -EPERM) { | 
 | 			vxge_debug_tx(VXGE_ERR, | 
 | 				"%s: Failed to store the mac address", | 
 | 				dev->name); | 
 | 			dev_kfree_skb(skb); | 
 | 			return NETDEV_TX_OK; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (vdev->config.tx_steering_type == TX_MULTIQ_STEERING) | 
 | 		vpath_no = skb_get_queue_mapping(skb); | 
 | 	else if (vdev->config.tx_steering_type == TX_PORT_STEERING) | 
 | 		vpath_no = vxge_get_vpath_no(vdev, skb, &do_spin_tx_lock); | 
 |  | 
 | 	vxge_debug_tx(VXGE_TRACE, "%s: vpath_no= %d", dev->name, vpath_no); | 
 |  | 
 | 	if (vpath_no >= vdev->no_of_vpath) | 
 | 		vpath_no = 0; | 
 |  | 
 | 	fifo = &vdev->vpaths[vpath_no].fifo; | 
 | 	fifo_hw = fifo->handle; | 
 |  | 
 | 	if (do_spin_tx_lock) | 
 | 		spin_lock_irqsave(&fifo->tx_lock, flags); | 
 | 	else { | 
 | 		if (unlikely(!spin_trylock_irqsave(&fifo->tx_lock, flags))) | 
 | 			return NETDEV_TX_LOCKED; | 
 | 	} | 
 |  | 
 | 	if (vdev->config.tx_steering_type == TX_MULTIQ_STEERING) { | 
 | 		if (netif_subqueue_stopped(dev, skb)) { | 
 | 			spin_unlock_irqrestore(&fifo->tx_lock, flags); | 
 | 			return NETDEV_TX_BUSY; | 
 | 		} | 
 | 	} else if (unlikely(fifo->queue_state == VPATH_QUEUE_STOP)) { | 
 | 		if (netif_queue_stopped(dev)) { | 
 | 			spin_unlock_irqrestore(&fifo->tx_lock, flags); | 
 | 			return NETDEV_TX_BUSY; | 
 | 		} | 
 | 	} | 
 | 	avail = vxge_hw_fifo_free_txdl_count_get(fifo_hw); | 
 | 	if (avail == 0) { | 
 | 		vxge_debug_tx(VXGE_ERR, | 
 | 			"%s: No free TXDs available", dev->name); | 
 | 		fifo->stats.txd_not_free++; | 
 | 		vxge_stop_tx_queue(fifo); | 
 | 		goto _exit2; | 
 | 	} | 
 |  | 
 | 	/* Last TXD?  Stop tx queue to avoid dropping packets.  TX | 
 | 	 * completion will resume the queue. | 
 | 	 */ | 
 | 	if (avail == 1) | 
 | 		vxge_stop_tx_queue(fifo); | 
 |  | 
 | 	status = vxge_hw_fifo_txdl_reserve(fifo_hw, &dtr, &dtr_priv); | 
 | 	if (unlikely(status != VXGE_HW_OK)) { | 
 | 		vxge_debug_tx(VXGE_ERR, | 
 | 		   "%s: Out of descriptors .", dev->name); | 
 | 		fifo->stats.txd_out_of_desc++; | 
 | 		vxge_stop_tx_queue(fifo); | 
 | 		goto _exit2; | 
 | 	} | 
 |  | 
 | 	vxge_debug_tx(VXGE_TRACE, | 
 | 		"%s: %s:%d fifo_hw = %p dtr = %p dtr_priv = %p", | 
 | 		dev->name, __func__, __LINE__, | 
 | 		fifo_hw, dtr, dtr_priv); | 
 |  | 
 | 	if (vdev->vlgrp && vlan_tx_tag_present(skb)) { | 
 | 		u16 vlan_tag = vlan_tx_tag_get(skb); | 
 | 		vxge_hw_fifo_txdl_vlan_set(dtr, vlan_tag); | 
 | 	} | 
 |  | 
 | 	first_frg_len = skb_headlen(skb); | 
 |  | 
 | 	dma_pointer = pci_map_single(fifo->pdev, skb->data, first_frg_len, | 
 | 				PCI_DMA_TODEVICE); | 
 |  | 
 | 	if (unlikely(pci_dma_mapping_error(fifo->pdev, dma_pointer))) { | 
 | 		vxge_hw_fifo_txdl_free(fifo_hw, dtr); | 
 | 		vxge_stop_tx_queue(fifo); | 
 | 		fifo->stats.pci_map_fail++; | 
 | 		goto _exit2; | 
 | 	} | 
 |  | 
 | 	txdl_priv = vxge_hw_fifo_txdl_private_get(dtr); | 
 | 	txdl_priv->skb = skb; | 
 | 	txdl_priv->dma_buffers[j] = dma_pointer; | 
 |  | 
 | 	frg_cnt = skb_shinfo(skb)->nr_frags; | 
 | 	vxge_debug_tx(VXGE_TRACE, | 
 | 			"%s: %s:%d skb = %p txdl_priv = %p " | 
 | 			"frag_cnt = %d dma_pointer = 0x%llx", dev->name, | 
 | 			__func__, __LINE__, skb, txdl_priv, | 
 | 			frg_cnt, (unsigned long long)dma_pointer); | 
 |  | 
 | 	vxge_hw_fifo_txdl_buffer_set(fifo_hw, dtr, j++, dma_pointer, | 
 | 		first_frg_len); | 
 |  | 
 | 	frag = &skb_shinfo(skb)->frags[0]; | 
 | 	for (i = 0; i < frg_cnt; i++) { | 
 | 		/* ignore 0 length fragment */ | 
 | 		if (!frag->size) | 
 | 			continue; | 
 |  | 
 | 		dma_pointer = | 
 | 			(u64)pci_map_page(fifo->pdev, frag->page, | 
 | 				frag->page_offset, frag->size, | 
 | 				PCI_DMA_TODEVICE); | 
 |  | 
 | 		if (unlikely(pci_dma_mapping_error(fifo->pdev, dma_pointer))) | 
 | 			goto _exit0; | 
 | 		vxge_debug_tx(VXGE_TRACE, | 
 | 			"%s: %s:%d frag = %d dma_pointer = 0x%llx", | 
 | 				dev->name, __func__, __LINE__, i, | 
 | 				(unsigned long long)dma_pointer); | 
 |  | 
 | 		txdl_priv->dma_buffers[j] = dma_pointer; | 
 | 		vxge_hw_fifo_txdl_buffer_set(fifo_hw, dtr, j++, dma_pointer, | 
 | 					frag->size); | 
 | 		frag += 1; | 
 | 	} | 
 |  | 
 | 	offload_type = vxge_offload_type(skb); | 
 |  | 
 | 	if (offload_type & (SKB_GSO_TCPV4 | SKB_GSO_TCPV6)) { | 
 |  | 
 | 		int mss = vxge_tcp_mss(skb); | 
 | 		if (mss) { | 
 | 			vxge_debug_tx(VXGE_TRACE, | 
 | 				"%s: %s:%d mss = %d", | 
 | 				dev->name, __func__, __LINE__, mss); | 
 | 			vxge_hw_fifo_txdl_mss_set(dtr, mss); | 
 | 		} else { | 
 | 			vxge_assert(skb->len <= | 
 | 				dev->mtu + VXGE_HW_MAC_HEADER_MAX_SIZE); | 
 | 			vxge_assert(0); | 
 | 			goto _exit1; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (skb->ip_summed == CHECKSUM_PARTIAL) | 
 | 		vxge_hw_fifo_txdl_cksum_set_bits(dtr, | 
 | 					VXGE_HW_FIFO_TXD_TX_CKO_IPV4_EN | | 
 | 					VXGE_HW_FIFO_TXD_TX_CKO_TCP_EN | | 
 | 					VXGE_HW_FIFO_TXD_TX_CKO_UDP_EN); | 
 |  | 
 | 	vxge_hw_fifo_txdl_post(fifo_hw, dtr); | 
 | #ifdef NETIF_F_LLTX | 
 | 	dev->trans_start = jiffies; /* NETIF_F_LLTX driver :( */ | 
 | #endif | 
 | 	spin_unlock_irqrestore(&fifo->tx_lock, flags); | 
 |  | 
 | 	VXGE_COMPLETE_VPATH_TX(fifo); | 
 | 	vxge_debug_entryexit(VXGE_TRACE, "%s: %s:%d  Exiting...", | 
 | 		dev->name, __func__, __LINE__); | 
 | 	return NETDEV_TX_OK; | 
 |  | 
 | _exit0: | 
 | 	vxge_debug_tx(VXGE_TRACE, "%s: pci_map_page failed", dev->name); | 
 |  | 
 | _exit1: | 
 | 	j = 0; | 
 | 	frag = &skb_shinfo(skb)->frags[0]; | 
 |  | 
 | 	pci_unmap_single(fifo->pdev, txdl_priv->dma_buffers[j++], | 
 | 			skb_headlen(skb), PCI_DMA_TODEVICE); | 
 |  | 
 | 	for (; j < i; j++) { | 
 | 		pci_unmap_page(fifo->pdev, txdl_priv->dma_buffers[j], | 
 | 			frag->size, PCI_DMA_TODEVICE); | 
 | 		frag += 1; | 
 | 	} | 
 |  | 
 | 	vxge_hw_fifo_txdl_free(fifo_hw, dtr); | 
 | _exit2: | 
 | 	dev_kfree_skb(skb); | 
 | 	spin_unlock_irqrestore(&fifo->tx_lock, flags); | 
 | 	VXGE_COMPLETE_VPATH_TX(fifo); | 
 |  | 
 | 	return NETDEV_TX_OK; | 
 | } | 
 |  | 
 | /* | 
 |  * vxge_rx_term | 
 |  * | 
 |  * Function will be called by hw function to abort all outstanding receive | 
 |  * descriptors. | 
 |  */ | 
 | static void | 
 | vxge_rx_term(void *dtrh, enum vxge_hw_rxd_state state, void *userdata) | 
 | { | 
 | 	struct vxge_ring *ring = (struct vxge_ring *)userdata; | 
 | 	struct vxge_rx_priv *rx_priv = | 
 | 		vxge_hw_ring_rxd_private_get(dtrh); | 
 |  | 
 | 	vxge_debug_entryexit(VXGE_TRACE, "%s: %s:%d", | 
 | 			ring->ndev->name, __func__, __LINE__); | 
 | 	if (state != VXGE_HW_RXD_STATE_POSTED) | 
 | 		return; | 
 |  | 
 | 	pci_unmap_single(ring->pdev, rx_priv->data_dma, | 
 | 		rx_priv->data_size, PCI_DMA_FROMDEVICE); | 
 |  | 
 | 	dev_kfree_skb(rx_priv->skb); | 
 | 	rx_priv->skb_data = NULL; | 
 |  | 
 | 	vxge_debug_entryexit(VXGE_TRACE, | 
 | 		"%s: %s:%d  Exiting...", | 
 | 		ring->ndev->name, __func__, __LINE__); | 
 | } | 
 |  | 
 | /* | 
 |  * vxge_tx_term | 
 |  * | 
 |  * Function will be called to abort all outstanding tx descriptors | 
 |  */ | 
 | static void | 
 | vxge_tx_term(void *dtrh, enum vxge_hw_txdl_state state, void *userdata) | 
 | { | 
 | 	struct vxge_fifo *fifo = (struct vxge_fifo *)userdata; | 
 | 	skb_frag_t *frag; | 
 | 	int i = 0, j, frg_cnt; | 
 | 	struct vxge_tx_priv *txd_priv = vxge_hw_fifo_txdl_private_get(dtrh); | 
 | 	struct sk_buff *skb = txd_priv->skb; | 
 |  | 
 | 	vxge_debug_entryexit(VXGE_TRACE, "%s:%d", __func__, __LINE__); | 
 |  | 
 | 	if (state != VXGE_HW_TXDL_STATE_POSTED) | 
 | 		return; | 
 |  | 
 | 	/* check skb validity */ | 
 | 	vxge_assert(skb); | 
 | 	frg_cnt = skb_shinfo(skb)->nr_frags; | 
 | 	frag = &skb_shinfo(skb)->frags[0]; | 
 |  | 
 | 	/*  for unfragmented skb */ | 
 | 	pci_unmap_single(fifo->pdev, txd_priv->dma_buffers[i++], | 
 | 		skb_headlen(skb), PCI_DMA_TODEVICE); | 
 |  | 
 | 	for (j = 0; j < frg_cnt; j++) { | 
 | 		pci_unmap_page(fifo->pdev, txd_priv->dma_buffers[i++], | 
 | 			       frag->size, PCI_DMA_TODEVICE); | 
 | 		frag += 1; | 
 | 	} | 
 |  | 
 | 	dev_kfree_skb(skb); | 
 |  | 
 | 	vxge_debug_entryexit(VXGE_TRACE, | 
 | 		"%s:%d  Exiting...", __func__, __LINE__); | 
 | } | 
 |  | 
 | /** | 
 |  * vxge_set_multicast | 
 |  * @dev: pointer to the device structure | 
 |  * | 
 |  * Entry point for multicast address enable/disable | 
 |  * This function is a driver entry point which gets called by the kernel | 
 |  * whenever multicast addresses must be enabled/disabled. This also gets | 
 |  * called to set/reset promiscuous mode. Depending on the deivce flag, we | 
 |  * determine, if multicast address must be enabled or if promiscuous mode | 
 |  * is to be disabled etc. | 
 |  */ | 
 | static void vxge_set_multicast(struct net_device *dev) | 
 | { | 
 | 	struct dev_mc_list *mclist; | 
 | 	struct vxgedev *vdev; | 
 | 	int i, mcast_cnt = 0; | 
 | 	struct __vxge_hw_device  *hldev; | 
 | 	enum vxge_hw_status status = VXGE_HW_OK; | 
 | 	struct macInfo mac_info; | 
 | 	int vpath_idx = 0; | 
 | 	struct vxge_mac_addrs *mac_entry; | 
 | 	struct list_head *list_head; | 
 | 	struct list_head *entry, *next; | 
 | 	u8 *mac_address = NULL; | 
 |  | 
 | 	vxge_debug_entryexit(VXGE_TRACE, | 
 | 		"%s:%d", __func__, __LINE__); | 
 |  | 
 | 	vdev = (struct vxgedev *)netdev_priv(dev); | 
 | 	hldev = (struct __vxge_hw_device  *)vdev->devh; | 
 |  | 
 | 	if (unlikely(!is_vxge_card_up(vdev))) | 
 | 		return; | 
 |  | 
 | 	if ((dev->flags & IFF_ALLMULTI) && (!vdev->all_multi_flg)) { | 
 | 		for (i = 0; i < vdev->no_of_vpath; i++) { | 
 | 			vxge_assert(vdev->vpaths[i].is_open); | 
 | 			status = vxge_hw_vpath_mcast_enable( | 
 | 						vdev->vpaths[i].handle); | 
 | 			vdev->all_multi_flg = 1; | 
 | 		} | 
 | 	} else if ((dev->flags & IFF_ALLMULTI) && (vdev->all_multi_flg)) { | 
 | 		for (i = 0; i < vdev->no_of_vpath; i++) { | 
 | 			vxge_assert(vdev->vpaths[i].is_open); | 
 | 			status = vxge_hw_vpath_mcast_disable( | 
 | 						vdev->vpaths[i].handle); | 
 | 			vdev->all_multi_flg = 1; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (status != VXGE_HW_OK) | 
 | 		vxge_debug_init(VXGE_ERR, | 
 | 			"failed to %s multicast, status %d", | 
 | 			dev->flags & IFF_ALLMULTI ? | 
 | 			"enable" : "disable", status); | 
 |  | 
 | 	if (!vdev->config.addr_learn_en) { | 
 | 		if (dev->flags & IFF_PROMISC) { | 
 | 			for (i = 0; i < vdev->no_of_vpath; i++) { | 
 | 				vxge_assert(vdev->vpaths[i].is_open); | 
 | 				status = vxge_hw_vpath_promisc_enable( | 
 | 						vdev->vpaths[i].handle); | 
 | 			} | 
 | 		} else { | 
 | 			for (i = 0; i < vdev->no_of_vpath; i++) { | 
 | 				vxge_assert(vdev->vpaths[i].is_open); | 
 | 				status = vxge_hw_vpath_promisc_disable( | 
 | 						vdev->vpaths[i].handle); | 
 | 			} | 
 | 		} | 
 | 	} | 
 |  | 
 | 	memset(&mac_info, 0, sizeof(struct macInfo)); | 
 | 	/* Update individual M_CAST address list */ | 
 | 	if ((!vdev->all_multi_flg) && dev->mc_count) { | 
 |  | 
 | 		mcast_cnt = vdev->vpaths[0].mcast_addr_cnt; | 
 | 		list_head = &vdev->vpaths[0].mac_addr_list; | 
 | 		if ((dev->mc_count + | 
 | 			(vdev->vpaths[0].mac_addr_cnt - mcast_cnt)) > | 
 | 				vdev->vpaths[0].max_mac_addr_cnt) | 
 | 			goto _set_all_mcast; | 
 |  | 
 | 		/* Delete previous MC's */ | 
 | 		for (i = 0; i < mcast_cnt; i++) { | 
 | 			if (!list_empty(list_head)) | 
 | 				mac_entry = (struct vxge_mac_addrs *) | 
 | 					list_first_entry(list_head, | 
 | 						struct vxge_mac_addrs, | 
 | 						item); | 
 |  | 
 | 			list_for_each_safe(entry, next, list_head) { | 
 |  | 
 | 				mac_entry = (struct vxge_mac_addrs *) entry; | 
 | 				/* Copy the mac address to delete */ | 
 | 				mac_address = (u8 *)&mac_entry->macaddr; | 
 | 				memcpy(mac_info.macaddr, mac_address, ETH_ALEN); | 
 |  | 
 | 				/* Is this a multicast address */ | 
 | 				if (0x01 & mac_info.macaddr[0]) { | 
 | 					for (vpath_idx = 0; vpath_idx < | 
 | 						vdev->no_of_vpath; | 
 | 						vpath_idx++) { | 
 | 						mac_info.vpath_no = vpath_idx; | 
 | 						status = vxge_del_mac_addr( | 
 | 								vdev, | 
 | 								&mac_info); | 
 | 					} | 
 | 				} | 
 | 			} | 
 | 		} | 
 |  | 
 | 		/* Add new ones */ | 
 | 		for (i = 0, mclist = dev->mc_list; i < dev->mc_count; | 
 | 			i++, mclist = mclist->next) { | 
 |  | 
 | 			memcpy(mac_info.macaddr, mclist->dmi_addr, ETH_ALEN); | 
 | 			for (vpath_idx = 0; vpath_idx < vdev->no_of_vpath; | 
 | 					vpath_idx++) { | 
 | 				mac_info.vpath_no = vpath_idx; | 
 | 				mac_info.state = VXGE_LL_MAC_ADDR_IN_DA_TABLE; | 
 | 				status = vxge_add_mac_addr(vdev, &mac_info); | 
 | 				if (status != VXGE_HW_OK) { | 
 | 					vxge_debug_init(VXGE_ERR, | 
 | 						"%s:%d Setting individual" | 
 | 						"multicast address failed", | 
 | 						__func__, __LINE__); | 
 | 					goto _set_all_mcast; | 
 | 				} | 
 | 			} | 
 | 		} | 
 |  | 
 | 		return; | 
 | _set_all_mcast: | 
 | 		mcast_cnt = vdev->vpaths[0].mcast_addr_cnt; | 
 | 		/* Delete previous MC's */ | 
 | 		for (i = 0; i < mcast_cnt; i++) { | 
 |  | 
 | 			list_for_each_safe(entry, next, list_head) { | 
 |  | 
 | 				mac_entry = (struct vxge_mac_addrs *) entry; | 
 | 				/* Copy the mac address to delete */ | 
 | 				mac_address = (u8 *)&mac_entry->macaddr; | 
 | 				memcpy(mac_info.macaddr, mac_address, ETH_ALEN); | 
 |  | 
 | 				/* Is this a multicast address */ | 
 | 				if (0x01 & mac_info.macaddr[0]) | 
 | 					break; | 
 | 			} | 
 |  | 
 | 			for (vpath_idx = 0; vpath_idx < vdev->no_of_vpath; | 
 | 					vpath_idx++) { | 
 | 				mac_info.vpath_no = vpath_idx; | 
 | 				status = vxge_del_mac_addr(vdev, &mac_info); | 
 | 			} | 
 | 		} | 
 |  | 
 | 		/* Enable all multicast */ | 
 | 		for (i = 0; i < vdev->no_of_vpath; i++) { | 
 | 			vxge_assert(vdev->vpaths[i].is_open); | 
 | 			status = vxge_hw_vpath_mcast_enable( | 
 | 						vdev->vpaths[i].handle); | 
 | 			if (status != VXGE_HW_OK) { | 
 | 				vxge_debug_init(VXGE_ERR, | 
 | 					"%s:%d Enabling all multicasts failed", | 
 | 					 __func__, __LINE__); | 
 | 			} | 
 | 			vdev->all_multi_flg = 1; | 
 | 		} | 
 | 		dev->flags |= IFF_ALLMULTI; | 
 | 	} | 
 |  | 
 | 	vxge_debug_entryexit(VXGE_TRACE, | 
 | 		"%s:%d  Exiting...", __func__, __LINE__); | 
 | } | 
 |  | 
 | /** | 
 |  * vxge_set_mac_addr | 
 |  * @dev: pointer to the device structure | 
 |  * | 
 |  * Update entry "0" (default MAC addr) | 
 |  */ | 
 | static int vxge_set_mac_addr(struct net_device *dev, void *p) | 
 | { | 
 | 	struct sockaddr *addr = p; | 
 | 	struct vxgedev *vdev; | 
 | 	struct __vxge_hw_device  *hldev; | 
 | 	enum vxge_hw_status status = VXGE_HW_OK; | 
 | 	struct macInfo mac_info_new, mac_info_old; | 
 | 	int vpath_idx = 0; | 
 |  | 
 | 	vxge_debug_entryexit(VXGE_TRACE, "%s:%d", __func__, __LINE__); | 
 |  | 
 | 	vdev = (struct vxgedev *)netdev_priv(dev); | 
 | 	hldev = vdev->devh; | 
 |  | 
 | 	if (!is_valid_ether_addr(addr->sa_data)) | 
 | 		return -EINVAL; | 
 |  | 
 | 	memset(&mac_info_new, 0, sizeof(struct macInfo)); | 
 | 	memset(&mac_info_old, 0, sizeof(struct macInfo)); | 
 |  | 
 | 	vxge_debug_entryexit(VXGE_TRACE, "%s:%d  Exiting...", | 
 | 		__func__, __LINE__); | 
 |  | 
 | 	/* Get the old address */ | 
 | 	memcpy(mac_info_old.macaddr, dev->dev_addr, dev->addr_len); | 
 |  | 
 | 	/* Copy the new address */ | 
 | 	memcpy(mac_info_new.macaddr, addr->sa_data, dev->addr_len); | 
 |  | 
 | 	/* First delete the old mac address from all the vpaths | 
 | 	as we can't specify the index while adding new mac address */ | 
 | 	for (vpath_idx = 0; vpath_idx < vdev->no_of_vpath; vpath_idx++) { | 
 | 		struct vxge_vpath *vpath = &vdev->vpaths[vpath_idx]; | 
 | 		if (!vpath->is_open) { | 
 | 			/* This can happen when this interface is added/removed | 
 | 			to the bonding interface. Delete this station address | 
 | 			from the linked list */ | 
 | 			vxge_mac_list_del(vpath, &mac_info_old); | 
 |  | 
 | 			/* Add this new address to the linked list | 
 | 			for later restoring */ | 
 | 			vxge_mac_list_add(vpath, &mac_info_new); | 
 |  | 
 | 			continue; | 
 | 		} | 
 | 		/* Delete the station address */ | 
 | 		mac_info_old.vpath_no = vpath_idx; | 
 | 		status = vxge_del_mac_addr(vdev, &mac_info_old); | 
 | 	} | 
 |  | 
 | 	if (unlikely(!is_vxge_card_up(vdev))) { | 
 | 		memcpy(dev->dev_addr, addr->sa_data, dev->addr_len); | 
 | 		return VXGE_HW_OK; | 
 | 	} | 
 |  | 
 | 	/* Set this mac address to all the vpaths */ | 
 | 	for (vpath_idx = 0; vpath_idx < vdev->no_of_vpath; vpath_idx++) { | 
 | 		mac_info_new.vpath_no = vpath_idx; | 
 | 		mac_info_new.state = VXGE_LL_MAC_ADDR_IN_DA_TABLE; | 
 | 		status = vxge_add_mac_addr(vdev, &mac_info_new); | 
 | 		if (status != VXGE_HW_OK) | 
 | 			return -EINVAL; | 
 | 	} | 
 |  | 
 | 	memcpy(dev->dev_addr, addr->sa_data, dev->addr_len); | 
 |  | 
 | 	return status; | 
 | } | 
 |  | 
 | /* | 
 |  * vxge_vpath_intr_enable | 
 |  * @vdev: pointer to vdev | 
 |  * @vp_id: vpath for which to enable the interrupts | 
 |  * | 
 |  * Enables the interrupts for the vpath | 
 | */ | 
 | void vxge_vpath_intr_enable(struct vxgedev *vdev, int vp_id) | 
 | { | 
 | 	struct vxge_vpath *vpath = &vdev->vpaths[vp_id]; | 
 | 	int msix_id, alarm_msix_id; | 
 | 	int tim_msix_id[4] = {[0 ...3] = 0}; | 
 |  | 
 | 	vxge_hw_vpath_intr_enable(vpath->handle); | 
 |  | 
 | 	if (vdev->config.intr_type == INTA) | 
 | 		vxge_hw_vpath_inta_unmask_tx_rx(vpath->handle); | 
 | 	else { | 
 | 		msix_id = vp_id * VXGE_HW_VPATH_MSIX_ACTIVE; | 
 | 		alarm_msix_id = | 
 | 			VXGE_HW_VPATH_MSIX_ACTIVE * vdev->no_of_vpath - 2; | 
 |  | 
 | 		tim_msix_id[0] = msix_id; | 
 | 		tim_msix_id[1] = msix_id + 1; | 
 | 		vxge_hw_vpath_msix_set(vpath->handle, tim_msix_id, | 
 | 			alarm_msix_id); | 
 |  | 
 | 		vxge_hw_vpath_msix_unmask(vpath->handle, msix_id); | 
 | 		vxge_hw_vpath_msix_unmask(vpath->handle, msix_id + 1); | 
 |  | 
 | 		/* enable the alarm vector */ | 
 | 		vxge_hw_vpath_msix_unmask(vpath->handle, alarm_msix_id); | 
 | 	} | 
 | } | 
 |  | 
 | /* | 
 |  * vxge_vpath_intr_disable | 
 |  * @vdev: pointer to vdev | 
 |  * @vp_id: vpath for which to disable the interrupts | 
 |  * | 
 |  * Disables the interrupts for the vpath | 
 | */ | 
 | void vxge_vpath_intr_disable(struct vxgedev *vdev, int vp_id) | 
 | { | 
 | 	struct vxge_vpath *vpath = &vdev->vpaths[vp_id]; | 
 | 	int msix_id; | 
 |  | 
 | 	vxge_hw_vpath_intr_disable(vpath->handle); | 
 |  | 
 | 	if (vdev->config.intr_type == INTA) | 
 | 		vxge_hw_vpath_inta_mask_tx_rx(vpath->handle); | 
 | 	else { | 
 | 		msix_id = vp_id * VXGE_HW_VPATH_MSIX_ACTIVE; | 
 | 		vxge_hw_vpath_msix_mask(vpath->handle, msix_id); | 
 | 		vxge_hw_vpath_msix_mask(vpath->handle, msix_id + 1); | 
 |  | 
 | 		/* disable the alarm vector */ | 
 | 		msix_id = VXGE_HW_VPATH_MSIX_ACTIVE * vdev->no_of_vpath - 2; | 
 | 		vxge_hw_vpath_msix_mask(vpath->handle, msix_id); | 
 | 	} | 
 | } | 
 |  | 
 | /* | 
 |  * vxge_reset_vpath | 
 |  * @vdev: pointer to vdev | 
 |  * @vp_id: vpath to reset | 
 |  * | 
 |  * Resets the vpath | 
 | */ | 
 | static int vxge_reset_vpath(struct vxgedev *vdev, int vp_id) | 
 | { | 
 | 	enum vxge_hw_status status = VXGE_HW_OK; | 
 | 	int ret = 0; | 
 |  | 
 | 	/* check if device is down already */ | 
 | 	if (unlikely(!is_vxge_card_up(vdev))) | 
 | 		return 0; | 
 |  | 
 | 	/* is device reset already scheduled */ | 
 | 	if (test_bit(__VXGE_STATE_RESET_CARD, &vdev->state)) | 
 | 		return 0; | 
 |  | 
 | 	if (vdev->vpaths[vp_id].handle) { | 
 | 		if (vxge_hw_vpath_reset(vdev->vpaths[vp_id].handle) | 
 | 				== VXGE_HW_OK) { | 
 | 			if (is_vxge_card_up(vdev) && | 
 | 				vxge_hw_vpath_recover_from_reset( | 
 | 					vdev->vpaths[vp_id].handle) | 
 | 					!= VXGE_HW_OK) { | 
 | 				vxge_debug_init(VXGE_ERR, | 
 | 					"vxge_hw_vpath_recover_from_reset" | 
 | 					"failed for vpath:%d", vp_id); | 
 | 				return status; | 
 | 			} | 
 | 		} else { | 
 | 			vxge_debug_init(VXGE_ERR, | 
 | 				"vxge_hw_vpath_reset failed for" | 
 | 				"vpath:%d", vp_id); | 
 | 				return status; | 
 | 		} | 
 | 	} else | 
 | 		return VXGE_HW_FAIL; | 
 |  | 
 | 	vxge_restore_vpath_mac_addr(&vdev->vpaths[vp_id]); | 
 | 	vxge_restore_vpath_vid_table(&vdev->vpaths[vp_id]); | 
 |  | 
 | 	/* Enable all broadcast */ | 
 | 	vxge_hw_vpath_bcast_enable(vdev->vpaths[vp_id].handle); | 
 |  | 
 | 	/* Enable the interrupts */ | 
 | 	vxge_vpath_intr_enable(vdev, vp_id); | 
 |  | 
 | 	smp_wmb(); | 
 |  | 
 | 	/* Enable the flow of traffic through the vpath */ | 
 | 	vxge_hw_vpath_enable(vdev->vpaths[vp_id].handle); | 
 |  | 
 | 	smp_wmb(); | 
 | 	vxge_hw_vpath_rx_doorbell_init(vdev->vpaths[vp_id].handle); | 
 | 	vdev->vpaths[vp_id].ring.last_status = VXGE_HW_OK; | 
 |  | 
 | 	/* Vpath reset done */ | 
 | 	clear_bit(vp_id, &vdev->vp_reset); | 
 |  | 
 | 	/* Start the vpath queue */ | 
 | 	vxge_wake_tx_queue(&vdev->vpaths[vp_id].fifo, NULL); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int do_vxge_reset(struct vxgedev *vdev, int event) | 
 | { | 
 | 	enum vxge_hw_status status; | 
 | 	int ret = 0, vp_id, i; | 
 |  | 
 | 	vxge_debug_entryexit(VXGE_TRACE, "%s:%d", __func__, __LINE__); | 
 |  | 
 | 	if ((event == VXGE_LL_FULL_RESET) || (event == VXGE_LL_START_RESET)) { | 
 | 		/* check if device is down already */ | 
 | 		if (unlikely(!is_vxge_card_up(vdev))) | 
 | 			return 0; | 
 |  | 
 | 		/* is reset already scheduled */ | 
 | 		if (test_and_set_bit(__VXGE_STATE_RESET_CARD, &vdev->state)) | 
 | 			return 0; | 
 | 	} | 
 |  | 
 | 	if (event == VXGE_LL_FULL_RESET) { | 
 | 		/* wait for all the vpath reset to complete */ | 
 | 		for (vp_id = 0; vp_id < vdev->no_of_vpath; vp_id++) { | 
 | 			while (test_bit(vp_id, &vdev->vp_reset)) | 
 | 				msleep(50); | 
 | 		} | 
 |  | 
 | 		/* if execution mode is set to debug, don't reset the adapter */ | 
 | 		if (unlikely(vdev->exec_mode)) { | 
 | 			vxge_debug_init(VXGE_ERR, | 
 | 				"%s: execution mode is debug, returning..", | 
 | 				vdev->ndev->name); | 
 | 		clear_bit(__VXGE_STATE_CARD_UP, &vdev->state); | 
 | 		vxge_stop_all_tx_queue(vdev); | 
 | 		return 0; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (event == VXGE_LL_FULL_RESET) { | 
 | 		vxge_hw_device_intr_disable(vdev->devh); | 
 |  | 
 | 		switch (vdev->cric_err_event) { | 
 | 		case VXGE_HW_EVENT_UNKNOWN: | 
 | 			vxge_stop_all_tx_queue(vdev); | 
 | 			vxge_debug_init(VXGE_ERR, | 
 | 				"fatal: %s: Disabling device due to" | 
 | 				"unknown error", | 
 | 				vdev->ndev->name); | 
 | 			ret = -EPERM; | 
 | 			goto out; | 
 | 		case VXGE_HW_EVENT_RESET_START: | 
 | 			break; | 
 | 		case VXGE_HW_EVENT_RESET_COMPLETE: | 
 | 		case VXGE_HW_EVENT_LINK_DOWN: | 
 | 		case VXGE_HW_EVENT_LINK_UP: | 
 | 		case VXGE_HW_EVENT_ALARM_CLEARED: | 
 | 		case VXGE_HW_EVENT_ECCERR: | 
 | 		case VXGE_HW_EVENT_MRPCIM_ECCERR: | 
 | 			ret = -EPERM; | 
 | 			goto out; | 
 | 		case VXGE_HW_EVENT_FIFO_ERR: | 
 | 		case VXGE_HW_EVENT_VPATH_ERR: | 
 | 			break; | 
 | 		case VXGE_HW_EVENT_CRITICAL_ERR: | 
 | 			vxge_stop_all_tx_queue(vdev); | 
 | 			vxge_debug_init(VXGE_ERR, | 
 | 				"fatal: %s: Disabling device due to" | 
 | 				"serious error", | 
 | 				vdev->ndev->name); | 
 | 			/* SOP or device reset required */ | 
 | 			/* This event is not currently used */ | 
 | 			ret = -EPERM; | 
 | 			goto out; | 
 | 		case VXGE_HW_EVENT_SERR: | 
 | 			vxge_stop_all_tx_queue(vdev); | 
 | 			vxge_debug_init(VXGE_ERR, | 
 | 				"fatal: %s: Disabling device due to" | 
 | 				"serious error", | 
 | 				vdev->ndev->name); | 
 | 			ret = -EPERM; | 
 | 			goto out; | 
 | 		case VXGE_HW_EVENT_SRPCIM_SERR: | 
 | 		case VXGE_HW_EVENT_MRPCIM_SERR: | 
 | 			ret = -EPERM; | 
 | 			goto out; | 
 | 		case VXGE_HW_EVENT_SLOT_FREEZE: | 
 | 			vxge_stop_all_tx_queue(vdev); | 
 | 			vxge_debug_init(VXGE_ERR, | 
 | 				"fatal: %s: Disabling device due to" | 
 | 				"slot freeze", | 
 | 				vdev->ndev->name); | 
 | 			ret = -EPERM; | 
 | 			goto out; | 
 | 		default: | 
 | 			break; | 
 |  | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if ((event == VXGE_LL_FULL_RESET) || (event == VXGE_LL_START_RESET)) | 
 | 		vxge_stop_all_tx_queue(vdev); | 
 |  | 
 | 	if (event == VXGE_LL_FULL_RESET) { | 
 | 		status = vxge_reset_all_vpaths(vdev); | 
 | 		if (status != VXGE_HW_OK) { | 
 | 			vxge_debug_init(VXGE_ERR, | 
 | 				"fatal: %s: can not reset vpaths", | 
 | 				vdev->ndev->name); | 
 | 			ret = -EPERM; | 
 | 			goto out; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (event == VXGE_LL_COMPL_RESET) { | 
 | 		for (i = 0; i < vdev->no_of_vpath; i++) | 
 | 			if (vdev->vpaths[i].handle) { | 
 | 				if (vxge_hw_vpath_recover_from_reset( | 
 | 					vdev->vpaths[i].handle) | 
 | 						!= VXGE_HW_OK) { | 
 | 					vxge_debug_init(VXGE_ERR, | 
 | 						"vxge_hw_vpath_recover_" | 
 | 						"from_reset failed for vpath: " | 
 | 						"%d", i); | 
 | 					ret = -EPERM; | 
 | 					goto out; | 
 | 				} | 
 | 				} else { | 
 | 					vxge_debug_init(VXGE_ERR, | 
 | 					"vxge_hw_vpath_reset failed for " | 
 | 						"vpath:%d", i); | 
 | 					ret = -EPERM; | 
 | 					goto out; | 
 | 				} | 
 | 	} | 
 |  | 
 | 	if ((event == VXGE_LL_FULL_RESET) || (event == VXGE_LL_COMPL_RESET)) { | 
 | 		/* Reprogram the DA table with populated mac addresses */ | 
 | 		for (vp_id = 0; vp_id < vdev->no_of_vpath; vp_id++) { | 
 | 			vxge_restore_vpath_mac_addr(&vdev->vpaths[vp_id]); | 
 | 			vxge_restore_vpath_vid_table(&vdev->vpaths[vp_id]); | 
 | 		} | 
 |  | 
 | 		/* enable vpath interrupts */ | 
 | 		for (i = 0; i < vdev->no_of_vpath; i++) | 
 | 			vxge_vpath_intr_enable(vdev, i); | 
 |  | 
 | 		vxge_hw_device_intr_enable(vdev->devh); | 
 |  | 
 | 		smp_wmb(); | 
 |  | 
 | 		/* Indicate card up */ | 
 | 		set_bit(__VXGE_STATE_CARD_UP, &vdev->state); | 
 |  | 
 | 		/* Get the traffic to flow through the vpaths */ | 
 | 		for (i = 0; i < vdev->no_of_vpath; i++) { | 
 | 			vxge_hw_vpath_enable(vdev->vpaths[i].handle); | 
 | 			smp_wmb(); | 
 | 			vxge_hw_vpath_rx_doorbell_init(vdev->vpaths[i].handle); | 
 | 		} | 
 |  | 
 | 		vxge_wake_all_tx_queue(vdev); | 
 | 	} | 
 |  | 
 | out: | 
 | 	vxge_debug_entryexit(VXGE_TRACE, | 
 | 		"%s:%d  Exiting...", __func__, __LINE__); | 
 |  | 
 | 	/* Indicate reset done */ | 
 | 	if ((event == VXGE_LL_FULL_RESET) || (event == VXGE_LL_COMPL_RESET)) | 
 | 		clear_bit(__VXGE_STATE_RESET_CARD, &vdev->state); | 
 | 	return ret; | 
 | } | 
 |  | 
 | /* | 
 |  * vxge_reset | 
 |  * @vdev: pointer to ll device | 
 |  * | 
 |  * driver may reset the chip on events of serr, eccerr, etc | 
 |  */ | 
 | int vxge_reset(struct vxgedev *vdev) | 
 | { | 
 | 	do_vxge_reset(vdev, VXGE_LL_FULL_RESET); | 
 | 	return 0; | 
 | } | 
 |  | 
 | /** | 
 |  * vxge_poll - Receive handler when Receive Polling is used. | 
 |  * @dev: pointer to the device structure. | 
 |  * @budget: Number of packets budgeted to be processed in this iteration. | 
 |  * | 
 |  * This function comes into picture only if Receive side is being handled | 
 |  * through polling (called NAPI in linux). It mostly does what the normal | 
 |  * Rx interrupt handler does in terms of descriptor and packet processing | 
 |  * but not in an interrupt context. Also it will process a specified number | 
 |  * of packets at most in one iteration. This value is passed down by the | 
 |  * kernel as the function argument 'budget'. | 
 |  */ | 
 | static int vxge_poll_msix(struct napi_struct *napi, int budget) | 
 | { | 
 | 	struct vxge_ring *ring = | 
 | 		container_of(napi, struct vxge_ring, napi); | 
 | 	int budget_org = budget; | 
 | 	ring->budget = budget; | 
 |  | 
 | 	vxge_hw_vpath_poll_rx(ring->handle); | 
 |  | 
 | 	if (ring->pkts_processed < budget_org) { | 
 | 		napi_complete(napi); | 
 | 		/* Re enable the Rx interrupts for the vpath */ | 
 | 		vxge_hw_channel_msix_unmask( | 
 | 				(struct __vxge_hw_channel *)ring->handle, | 
 | 				ring->rx_vector_no); | 
 | 	} | 
 |  | 
 | 	return ring->pkts_processed; | 
 | } | 
 |  | 
 | static int vxge_poll_inta(struct napi_struct *napi, int budget) | 
 | { | 
 | 	struct vxgedev *vdev = container_of(napi, struct vxgedev, napi); | 
 | 	int pkts_processed = 0; | 
 | 	int i; | 
 | 	int budget_org = budget; | 
 | 	struct vxge_ring *ring; | 
 |  | 
 | 	struct __vxge_hw_device  *hldev = (struct __vxge_hw_device *) | 
 | 		pci_get_drvdata(vdev->pdev); | 
 |  | 
 | 	for (i = 0; i < vdev->no_of_vpath; i++) { | 
 | 		ring = &vdev->vpaths[i].ring; | 
 | 		ring->budget = budget; | 
 | 		vxge_hw_vpath_poll_rx(ring->handle); | 
 | 		pkts_processed += ring->pkts_processed; | 
 | 		budget -= ring->pkts_processed; | 
 | 		if (budget <= 0) | 
 | 			break; | 
 | 	} | 
 |  | 
 | 	VXGE_COMPLETE_ALL_TX(vdev); | 
 |  | 
 | 	if (pkts_processed < budget_org) { | 
 | 		napi_complete(napi); | 
 | 		/* Re enable the Rx interrupts for the ring */ | 
 | 		vxge_hw_device_unmask_all(hldev); | 
 | 		vxge_hw_device_flush_io(hldev); | 
 | 	} | 
 |  | 
 | 	return pkts_processed; | 
 | } | 
 |  | 
 | #ifdef CONFIG_NET_POLL_CONTROLLER | 
 | /** | 
 |  * vxge_netpoll - netpoll event handler entry point | 
 |  * @dev : pointer to the device structure. | 
 |  * Description: | 
 |  *      This function will be called by upper layer to check for events on the | 
 |  * interface in situations where interrupts are disabled. It is used for | 
 |  * specific in-kernel networking tasks, such as remote consoles and kernel | 
 |  * debugging over the network (example netdump in RedHat). | 
 |  */ | 
 | static void vxge_netpoll(struct net_device *dev) | 
 | { | 
 | 	struct __vxge_hw_device  *hldev; | 
 | 	struct vxgedev *vdev; | 
 |  | 
 | 	vdev = (struct vxgedev *)netdev_priv(dev); | 
 | 	hldev = (struct __vxge_hw_device  *)pci_get_drvdata(vdev->pdev); | 
 |  | 
 | 	vxge_debug_entryexit(VXGE_TRACE, "%s:%d", __func__, __LINE__); | 
 |  | 
 | 	if (pci_channel_offline(vdev->pdev)) | 
 | 		return; | 
 |  | 
 | 	disable_irq(dev->irq); | 
 | 	vxge_hw_device_clear_tx_rx(hldev); | 
 |  | 
 | 	vxge_hw_device_clear_tx_rx(hldev); | 
 | 	VXGE_COMPLETE_ALL_RX(vdev); | 
 | 	VXGE_COMPLETE_ALL_TX(vdev); | 
 |  | 
 | 	enable_irq(dev->irq); | 
 |  | 
 | 	vxge_debug_entryexit(VXGE_TRACE, | 
 | 		"%s:%d  Exiting...", __func__, __LINE__); | 
 | 	return; | 
 | } | 
 | #endif | 
 |  | 
 | /* RTH configuration */ | 
 | static enum vxge_hw_status vxge_rth_configure(struct vxgedev *vdev) | 
 | { | 
 | 	enum vxge_hw_status status = VXGE_HW_OK; | 
 | 	struct vxge_hw_rth_hash_types hash_types; | 
 | 	u8 itable[256] = {0}; /* indirection table */ | 
 | 	u8 mtable[256] = {0}; /* CPU to vpath mapping  */ | 
 | 	int index; | 
 |  | 
 | 	/* | 
 | 	 * Filling | 
 | 	 * 	- itable with bucket numbers | 
 | 	 * 	- mtable with bucket-to-vpath mapping | 
 | 	 */ | 
 | 	for (index = 0; index < (1 << vdev->config.rth_bkt_sz); index++) { | 
 | 		itable[index] = index; | 
 | 		mtable[index] = index % vdev->no_of_vpath; | 
 | 	} | 
 |  | 
 | 	/* Fill RTH hash types */ | 
 | 	hash_types.hash_type_tcpipv4_en   = vdev->config.rth_hash_type_tcpipv4; | 
 | 	hash_types.hash_type_ipv4_en      = vdev->config.rth_hash_type_ipv4; | 
 | 	hash_types.hash_type_tcpipv6_en   = vdev->config.rth_hash_type_tcpipv6; | 
 | 	hash_types.hash_type_ipv6_en      = vdev->config.rth_hash_type_ipv6; | 
 | 	hash_types.hash_type_tcpipv6ex_en = | 
 | 					vdev->config.rth_hash_type_tcpipv6ex; | 
 | 	hash_types.hash_type_ipv6ex_en    = vdev->config.rth_hash_type_ipv6ex; | 
 |  | 
 | 	/* set indirection table, bucket-to-vpath mapping */ | 
 | 	status = vxge_hw_vpath_rts_rth_itable_set(vdev->vp_handles, | 
 | 						vdev->no_of_vpath, | 
 | 						mtable, itable, | 
 | 						vdev->config.rth_bkt_sz); | 
 | 	if (status != VXGE_HW_OK) { | 
 | 		vxge_debug_init(VXGE_ERR, | 
 | 			"RTH indirection table configuration failed " | 
 | 			"for vpath:%d", vdev->vpaths[0].device_id); | 
 | 		return status; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	* Because the itable_set() method uses the active_table field | 
 | 	* for the target virtual path the RTH config should be updated | 
 | 	* for all VPATHs. The h/w only uses the lowest numbered VPATH | 
 | 	* when steering frames. | 
 | 	*/ | 
 | 	 for (index = 0; index < vdev->no_of_vpath; index++) { | 
 | 		status = vxge_hw_vpath_rts_rth_set( | 
 | 				vdev->vpaths[index].handle, | 
 | 				vdev->config.rth_algorithm, | 
 | 				&hash_types, | 
 | 				vdev->config.rth_bkt_sz); | 
 |  | 
 | 		 if (status != VXGE_HW_OK) { | 
 | 			vxge_debug_init(VXGE_ERR, | 
 | 				"RTH configuration failed for vpath:%d", | 
 | 				vdev->vpaths[index].device_id); | 
 | 			return status; | 
 | 		 } | 
 | 	 } | 
 |  | 
 | 	return status; | 
 | } | 
 |  | 
 | int vxge_mac_list_add(struct vxge_vpath *vpath, struct macInfo *mac) | 
 | { | 
 | 	struct vxge_mac_addrs *new_mac_entry; | 
 | 	u8 *mac_address = NULL; | 
 |  | 
 | 	if (vpath->mac_addr_cnt >= VXGE_MAX_LEARN_MAC_ADDR_CNT) | 
 | 		return TRUE; | 
 |  | 
 | 	new_mac_entry = kzalloc(sizeof(struct vxge_mac_addrs), GFP_ATOMIC); | 
 | 	if (!new_mac_entry) { | 
 | 		vxge_debug_mem(VXGE_ERR, | 
 | 			"%s: memory allocation failed", | 
 | 			VXGE_DRIVER_NAME); | 
 | 		return FALSE; | 
 | 	} | 
 |  | 
 | 	list_add(&new_mac_entry->item, &vpath->mac_addr_list); | 
 |  | 
 | 	/* Copy the new mac address to the list */ | 
 | 	mac_address = (u8 *)&new_mac_entry->macaddr; | 
 | 	memcpy(mac_address, mac->macaddr, ETH_ALEN); | 
 |  | 
 | 	new_mac_entry->state = mac->state; | 
 | 	vpath->mac_addr_cnt++; | 
 |  | 
 | 	/* Is this a multicast address */ | 
 | 	if (0x01 & mac->macaddr[0]) | 
 | 		vpath->mcast_addr_cnt++; | 
 |  | 
 | 	return TRUE; | 
 | } | 
 |  | 
 | /* Add a mac address to DA table */ | 
 | enum vxge_hw_status vxge_add_mac_addr(struct vxgedev *vdev, struct macInfo *mac) | 
 | { | 
 | 	enum vxge_hw_status status = VXGE_HW_OK; | 
 | 	struct vxge_vpath *vpath; | 
 | 	enum vxge_hw_vpath_mac_addr_add_mode duplicate_mode; | 
 |  | 
 | 	if (0x01 & mac->macaddr[0]) /* multicast address */ | 
 | 		duplicate_mode = VXGE_HW_VPATH_MAC_ADDR_ADD_DUPLICATE; | 
 | 	else | 
 | 		duplicate_mode = VXGE_HW_VPATH_MAC_ADDR_REPLACE_DUPLICATE; | 
 |  | 
 | 	vpath = &vdev->vpaths[mac->vpath_no]; | 
 | 	status = vxge_hw_vpath_mac_addr_add(vpath->handle, mac->macaddr, | 
 | 						mac->macmask, duplicate_mode); | 
 | 	if (status != VXGE_HW_OK) { | 
 | 		vxge_debug_init(VXGE_ERR, | 
 | 			"DA config add entry failed for vpath:%d", | 
 | 			vpath->device_id); | 
 | 	} else | 
 | 		if (FALSE == vxge_mac_list_add(vpath, mac)) | 
 | 			status = -EPERM; | 
 |  | 
 | 	return status; | 
 | } | 
 |  | 
 | int vxge_mac_list_del(struct vxge_vpath *vpath, struct macInfo *mac) | 
 | { | 
 | 	struct list_head *entry, *next; | 
 | 	u64 del_mac = 0; | 
 | 	u8 *mac_address = (u8 *) (&del_mac); | 
 |  | 
 | 	/* Copy the mac address to delete from the list */ | 
 | 	memcpy(mac_address, mac->macaddr, ETH_ALEN); | 
 |  | 
 | 	list_for_each_safe(entry, next, &vpath->mac_addr_list) { | 
 | 		if (((struct vxge_mac_addrs *)entry)->macaddr == del_mac) { | 
 | 			list_del(entry); | 
 | 			kfree((struct vxge_mac_addrs *)entry); | 
 | 			vpath->mac_addr_cnt--; | 
 |  | 
 | 			/* Is this a multicast address */ | 
 | 			if (0x01 & mac->macaddr[0]) | 
 | 				vpath->mcast_addr_cnt--; | 
 | 			return TRUE; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	return FALSE; | 
 | } | 
 | /* delete a mac address from DA table */ | 
 | enum vxge_hw_status vxge_del_mac_addr(struct vxgedev *vdev, struct macInfo *mac) | 
 | { | 
 | 	enum vxge_hw_status status = VXGE_HW_OK; | 
 | 	struct vxge_vpath *vpath; | 
 |  | 
 | 	vpath = &vdev->vpaths[mac->vpath_no]; | 
 | 	status = vxge_hw_vpath_mac_addr_delete(vpath->handle, mac->macaddr, | 
 | 						mac->macmask); | 
 | 	if (status != VXGE_HW_OK) { | 
 | 		vxge_debug_init(VXGE_ERR, | 
 | 			"DA config delete entry failed for vpath:%d", | 
 | 			vpath->device_id); | 
 | 	} else | 
 | 		vxge_mac_list_del(vpath, mac); | 
 | 	return status; | 
 | } | 
 |  | 
 | /* list all mac addresses from DA table */ | 
 | enum vxge_hw_status | 
 | static vxge_search_mac_addr_in_da_table(struct vxge_vpath *vpath, | 
 | 					struct macInfo *mac) | 
 | { | 
 | 	enum vxge_hw_status status = VXGE_HW_OK; | 
 | 	unsigned char macmask[ETH_ALEN]; | 
 | 	unsigned char macaddr[ETH_ALEN]; | 
 |  | 
 | 	status = vxge_hw_vpath_mac_addr_get(vpath->handle, | 
 | 				macaddr, macmask); | 
 | 	if (status != VXGE_HW_OK) { | 
 | 		vxge_debug_init(VXGE_ERR, | 
 | 			"DA config list entry failed for vpath:%d", | 
 | 			vpath->device_id); | 
 | 		return status; | 
 | 	} | 
 |  | 
 | 	while (memcmp(mac->macaddr, macaddr, ETH_ALEN)) { | 
 |  | 
 | 		status = vxge_hw_vpath_mac_addr_get_next(vpath->handle, | 
 | 				macaddr, macmask); | 
 | 		if (status != VXGE_HW_OK) | 
 | 			break; | 
 | 	} | 
 |  | 
 | 	return status; | 
 | } | 
 |  | 
 | /* Store all vlan ids from the list to the vid table */ | 
 | enum vxge_hw_status vxge_restore_vpath_vid_table(struct vxge_vpath *vpath) | 
 | { | 
 | 	enum vxge_hw_status status = VXGE_HW_OK; | 
 | 	struct vxgedev *vdev = vpath->vdev; | 
 | 	u16 vid; | 
 |  | 
 | 	if (vdev->vlgrp && vpath->is_open) { | 
 |  | 
 | 		for (vid = 0; vid < VLAN_GROUP_ARRAY_LEN; vid++) { | 
 | 			if (!vlan_group_get_device(vdev->vlgrp, vid)) | 
 | 				continue; | 
 | 			/* Add these vlan to the vid table */ | 
 | 			status = vxge_hw_vpath_vid_add(vpath->handle, vid); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	return status; | 
 | } | 
 |  | 
 | /* Store all mac addresses from the list to the DA table */ | 
 | enum vxge_hw_status vxge_restore_vpath_mac_addr(struct vxge_vpath *vpath) | 
 | { | 
 | 	enum vxge_hw_status status = VXGE_HW_OK; | 
 | 	struct macInfo mac_info; | 
 | 	u8 *mac_address = NULL; | 
 | 	struct list_head *entry, *next; | 
 |  | 
 | 	memset(&mac_info, 0, sizeof(struct macInfo)); | 
 |  | 
 | 	if (vpath->is_open) { | 
 |  | 
 | 		list_for_each_safe(entry, next, &vpath->mac_addr_list) { | 
 | 			mac_address = | 
 | 				(u8 *)& | 
 | 				((struct vxge_mac_addrs *)entry)->macaddr; | 
 | 			memcpy(mac_info.macaddr, mac_address, ETH_ALEN); | 
 | 			((struct vxge_mac_addrs *)entry)->state = | 
 | 				VXGE_LL_MAC_ADDR_IN_DA_TABLE; | 
 | 			/* does this mac address already exist in da table? */ | 
 | 			status = vxge_search_mac_addr_in_da_table(vpath, | 
 | 				&mac_info); | 
 | 			if (status != VXGE_HW_OK) { | 
 | 				/* Add this mac address to the DA table */ | 
 | 				status = vxge_hw_vpath_mac_addr_add( | 
 | 					vpath->handle, mac_info.macaddr, | 
 | 					mac_info.macmask, | 
 | 				    VXGE_HW_VPATH_MAC_ADDR_ADD_DUPLICATE); | 
 | 				if (status != VXGE_HW_OK) { | 
 | 					vxge_debug_init(VXGE_ERR, | 
 | 					    "DA add entry failed for vpath:%d", | 
 | 					    vpath->device_id); | 
 | 					((struct vxge_mac_addrs *)entry)->state | 
 | 						= VXGE_LL_MAC_ADDR_IN_LIST; | 
 | 				} | 
 | 			} | 
 | 		} | 
 | 	} | 
 |  | 
 | 	return status; | 
 | } | 
 |  | 
 | /* reset vpaths */ | 
 | enum vxge_hw_status vxge_reset_all_vpaths(struct vxgedev *vdev) | 
 | { | 
 | 	int i; | 
 | 	enum vxge_hw_status status = VXGE_HW_OK; | 
 |  | 
 | 	for (i = 0; i < vdev->no_of_vpath; i++) | 
 | 		if (vdev->vpaths[i].handle) { | 
 | 			if (vxge_hw_vpath_reset(vdev->vpaths[i].handle) | 
 | 					== VXGE_HW_OK) { | 
 | 				if (is_vxge_card_up(vdev) && | 
 | 					vxge_hw_vpath_recover_from_reset( | 
 | 						vdev->vpaths[i].handle) | 
 | 						!= VXGE_HW_OK) { | 
 | 					vxge_debug_init(VXGE_ERR, | 
 | 						"vxge_hw_vpath_recover_" | 
 | 						"from_reset failed for vpath: " | 
 | 						"%d", i); | 
 | 					return status; | 
 | 				} | 
 | 			} else { | 
 | 				vxge_debug_init(VXGE_ERR, | 
 | 					"vxge_hw_vpath_reset failed for " | 
 | 					"vpath:%d", i); | 
 | 					return status; | 
 | 			} | 
 | 		} | 
 | 	return status; | 
 | } | 
 |  | 
 | /* close vpaths */ | 
 | void vxge_close_vpaths(struct vxgedev *vdev, int index) | 
 | { | 
 | 	int i; | 
 | 	for (i = index; i < vdev->no_of_vpath; i++) { | 
 | 		if (vdev->vpaths[i].handle && vdev->vpaths[i].is_open) { | 
 | 			vxge_hw_vpath_close(vdev->vpaths[i].handle); | 
 | 			vdev->stats.vpaths_open--; | 
 | 		} | 
 | 		vdev->vpaths[i].is_open = 0; | 
 | 		vdev->vpaths[i].handle  = NULL; | 
 | 	} | 
 | } | 
 |  | 
 | /* open vpaths */ | 
 | int vxge_open_vpaths(struct vxgedev *vdev) | 
 | { | 
 | 	enum vxge_hw_status status; | 
 | 	int i; | 
 | 	u32 vp_id = 0; | 
 | 	struct vxge_hw_vpath_attr attr; | 
 |  | 
 | 	for (i = 0; i < vdev->no_of_vpath; i++) { | 
 | 		vxge_assert(vdev->vpaths[i].is_configured); | 
 | 		attr.vp_id = vdev->vpaths[i].device_id; | 
 | 		attr.fifo_attr.callback = vxge_xmit_compl; | 
 | 		attr.fifo_attr.txdl_term = vxge_tx_term; | 
 | 		attr.fifo_attr.per_txdl_space = sizeof(struct vxge_tx_priv); | 
 | 		attr.fifo_attr.userdata = (void *)&vdev->vpaths[i].fifo; | 
 |  | 
 | 		attr.ring_attr.callback = vxge_rx_1b_compl; | 
 | 		attr.ring_attr.rxd_init = vxge_rx_initial_replenish; | 
 | 		attr.ring_attr.rxd_term = vxge_rx_term; | 
 | 		attr.ring_attr.per_rxd_space = sizeof(struct vxge_rx_priv); | 
 | 		attr.ring_attr.userdata = (void *)&vdev->vpaths[i].ring; | 
 |  | 
 | 		vdev->vpaths[i].ring.ndev = vdev->ndev; | 
 | 		vdev->vpaths[i].ring.pdev = vdev->pdev; | 
 | 		status = vxge_hw_vpath_open(vdev->devh, &attr, | 
 | 				&(vdev->vpaths[i].handle)); | 
 | 		if (status == VXGE_HW_OK) { | 
 | 			vdev->vpaths[i].fifo.handle = | 
 | 			    (struct __vxge_hw_fifo *)attr.fifo_attr.userdata; | 
 | 			vdev->vpaths[i].ring.handle = | 
 | 			    (struct __vxge_hw_ring *)attr.ring_attr.userdata; | 
 | 			vdev->vpaths[i].fifo.tx_steering_type = | 
 | 				vdev->config.tx_steering_type; | 
 | 			vdev->vpaths[i].fifo.ndev = vdev->ndev; | 
 | 			vdev->vpaths[i].fifo.pdev = vdev->pdev; | 
 | 			vdev->vpaths[i].fifo.indicate_max_pkts = | 
 | 				vdev->config.fifo_indicate_max_pkts; | 
 | 			vdev->vpaths[i].ring.rx_vector_no = 0; | 
 | 			vdev->vpaths[i].ring.rx_csum = vdev->rx_csum; | 
 | 			vdev->vpaths[i].is_open = 1; | 
 | 			vdev->vp_handles[i] = vdev->vpaths[i].handle; | 
 | 			vdev->vpaths[i].ring.gro_enable = | 
 | 						vdev->config.gro_enable; | 
 | 			vdev->vpaths[i].ring.vlan_tag_strip = | 
 | 						vdev->vlan_tag_strip; | 
 | 			vdev->stats.vpaths_open++; | 
 | 		} else { | 
 | 			vdev->stats.vpath_open_fail++; | 
 | 			vxge_debug_init(VXGE_ERR, | 
 | 				"%s: vpath: %d failed to open " | 
 | 				"with status: %d", | 
 | 			    vdev->ndev->name, vdev->vpaths[i].device_id, | 
 | 				status); | 
 | 			vxge_close_vpaths(vdev, 0); | 
 | 			return -EPERM; | 
 | 		} | 
 |  | 
 | 		vp_id = | 
 | 		  ((struct __vxge_hw_vpath_handle *)vdev->vpaths[i].handle)-> | 
 | 		  vpath->vp_id; | 
 | 		vdev->vpaths_deployed |= vxge_mBIT(vp_id); | 
 | 	} | 
 | 	return VXGE_HW_OK; | 
 | } | 
 |  | 
 | /* | 
 |  *  vxge_isr_napi | 
 |  *  @irq: the irq of the device. | 
 |  *  @dev_id: a void pointer to the hldev structure of the Titan device | 
 |  *  @ptregs: pointer to the registers pushed on the stack. | 
 |  * | 
 |  *  This function is the ISR handler of the device when napi is enabled. It | 
 |  *  identifies the reason for the interrupt and calls the relevant service | 
 |  *  routines. | 
 |  */ | 
 | static irqreturn_t vxge_isr_napi(int irq, void *dev_id) | 
 | { | 
 | 	struct net_device *dev; | 
 | 	struct __vxge_hw_device *hldev; | 
 | 	u64 reason; | 
 | 	enum vxge_hw_status status; | 
 | 	struct vxgedev *vdev = (struct vxgedev *) dev_id;; | 
 |  | 
 | 	vxge_debug_intr(VXGE_TRACE, "%s:%d", __func__, __LINE__); | 
 |  | 
 | 	dev = vdev->ndev; | 
 | 	hldev = (struct __vxge_hw_device *)pci_get_drvdata(vdev->pdev); | 
 |  | 
 | 	if (pci_channel_offline(vdev->pdev)) | 
 | 		return IRQ_NONE; | 
 |  | 
 | 	if (unlikely(!is_vxge_card_up(vdev))) | 
 | 		return IRQ_NONE; | 
 |  | 
 | 	status = vxge_hw_device_begin_irq(hldev, vdev->exec_mode, | 
 | 			&reason); | 
 | 	if (status == VXGE_HW_OK) { | 
 | 		vxge_hw_device_mask_all(hldev); | 
 |  | 
 | 		if (reason & | 
 | 			VXGE_HW_TITAN_GENERAL_INT_STATUS_VPATH_TRAFFIC_INT( | 
 | 			vdev->vpaths_deployed >> | 
 | 			(64 - VXGE_HW_MAX_VIRTUAL_PATHS))) { | 
 |  | 
 | 			vxge_hw_device_clear_tx_rx(hldev); | 
 | 			napi_schedule(&vdev->napi); | 
 | 			vxge_debug_intr(VXGE_TRACE, | 
 | 				"%s:%d  Exiting...", __func__, __LINE__); | 
 | 			return IRQ_HANDLED; | 
 | 		} else | 
 | 			vxge_hw_device_unmask_all(hldev); | 
 | 	} else if (unlikely((status == VXGE_HW_ERR_VPATH) || | 
 | 		(status == VXGE_HW_ERR_CRITICAL) || | 
 | 		(status == VXGE_HW_ERR_FIFO))) { | 
 | 		vxge_hw_device_mask_all(hldev); | 
 | 		vxge_hw_device_flush_io(hldev); | 
 | 		return IRQ_HANDLED; | 
 | 	} else if (unlikely(status == VXGE_HW_ERR_SLOT_FREEZE)) | 
 | 		return IRQ_HANDLED; | 
 |  | 
 | 	vxge_debug_intr(VXGE_TRACE, "%s:%d  Exiting...", __func__, __LINE__); | 
 | 	return IRQ_NONE; | 
 | } | 
 |  | 
 | #ifdef CONFIG_PCI_MSI | 
 |  | 
 | static irqreturn_t | 
 | vxge_tx_msix_handle(int irq, void *dev_id) | 
 | { | 
 | 	struct vxge_fifo *fifo = (struct vxge_fifo *)dev_id; | 
 |  | 
 | 	VXGE_COMPLETE_VPATH_TX(fifo); | 
 |  | 
 | 	return IRQ_HANDLED; | 
 | } | 
 |  | 
 | static irqreturn_t | 
 | vxge_rx_msix_napi_handle(int irq, void *dev_id) | 
 | { | 
 | 	struct vxge_ring *ring = (struct vxge_ring *)dev_id; | 
 |  | 
 | 	/* MSIX_IDX for Rx is 1 */ | 
 | 	vxge_hw_channel_msix_mask((struct __vxge_hw_channel *)ring->handle, | 
 | 					ring->rx_vector_no); | 
 |  | 
 | 	napi_schedule(&ring->napi); | 
 | 	return IRQ_HANDLED; | 
 | } | 
 |  | 
 | static irqreturn_t | 
 | vxge_alarm_msix_handle(int irq, void *dev_id) | 
 | { | 
 | 	int i; | 
 | 	enum vxge_hw_status status; | 
 | 	struct vxge_vpath *vpath = (struct vxge_vpath *)dev_id; | 
 | 	struct vxgedev *vdev = vpath->vdev; | 
 | 	int alarm_msix_id = | 
 | 		VXGE_HW_VPATH_MSIX_ACTIVE * vdev->no_of_vpath - 2; | 
 |  | 
 | 	for (i = 0; i < vdev->no_of_vpath; i++) { | 
 | 		vxge_hw_vpath_msix_mask(vdev->vpaths[i].handle, | 
 | 			alarm_msix_id); | 
 |  | 
 | 		status = vxge_hw_vpath_alarm_process(vdev->vpaths[i].handle, | 
 | 			vdev->exec_mode); | 
 | 		if (status == VXGE_HW_OK) { | 
 |  | 
 | 			vxge_hw_vpath_msix_unmask(vdev->vpaths[i].handle, | 
 | 				alarm_msix_id); | 
 | 			continue; | 
 | 		} | 
 | 		vxge_debug_intr(VXGE_ERR, | 
 | 			"%s: vxge_hw_vpath_alarm_process failed %x ", | 
 | 			VXGE_DRIVER_NAME, status); | 
 | 	} | 
 | 	return IRQ_HANDLED; | 
 | } | 
 |  | 
 | static int vxge_alloc_msix(struct vxgedev *vdev) | 
 | { | 
 | 	int j, i, ret = 0; | 
 | 	int intr_cnt = 0; | 
 | 	int alarm_msix_id = 0, msix_intr_vect = 0; | 
 | 	vdev->intr_cnt = 0; | 
 |  | 
 | 	/* Tx/Rx MSIX Vectors count */ | 
 | 	vdev->intr_cnt = vdev->no_of_vpath * 2; | 
 |  | 
 | 	/* Alarm MSIX Vectors count */ | 
 | 	vdev->intr_cnt++; | 
 |  | 
 | 	intr_cnt = (vdev->max_vpath_supported * 2) + 1; | 
 | 	vdev->entries = kzalloc(intr_cnt * sizeof(struct msix_entry), | 
 | 						GFP_KERNEL); | 
 | 	if (!vdev->entries) { | 
 | 		vxge_debug_init(VXGE_ERR, | 
 | 			"%s: memory allocation failed", | 
 | 			VXGE_DRIVER_NAME); | 
 | 		return  -ENOMEM; | 
 | 	} | 
 |  | 
 | 	vdev->vxge_entries = kzalloc(intr_cnt * sizeof(struct vxge_msix_entry), | 
 | 							GFP_KERNEL); | 
 | 	if (!vdev->vxge_entries) { | 
 | 		vxge_debug_init(VXGE_ERR, "%s: memory allocation failed", | 
 | 			VXGE_DRIVER_NAME); | 
 | 		kfree(vdev->entries); | 
 | 		return -ENOMEM; | 
 | 	} | 
 |  | 
 | 	/* Last vector in the list is used for alarm */ | 
 | 	alarm_msix_id = VXGE_HW_VPATH_MSIX_ACTIVE * vdev->no_of_vpath - 2; | 
 | 	for (i = 0, j = 0; i < vdev->max_vpath_supported; i++) { | 
 |  | 
 | 		msix_intr_vect = i * VXGE_HW_VPATH_MSIX_ACTIVE; | 
 |  | 
 | 		/* Initialize the fifo vector */ | 
 | 		vdev->entries[j].entry = msix_intr_vect; | 
 | 		vdev->vxge_entries[j].entry = msix_intr_vect; | 
 | 		vdev->vxge_entries[j].in_use = 0; | 
 | 		j++; | 
 |  | 
 | 		/* Initialize the ring vector */ | 
 | 		vdev->entries[j].entry = msix_intr_vect + 1; | 
 | 		vdev->vxge_entries[j].entry = msix_intr_vect + 1; | 
 | 		vdev->vxge_entries[j].in_use = 0; | 
 | 		j++; | 
 | 	} | 
 |  | 
 | 	/* Initialize the alarm vector */ | 
 | 	vdev->entries[j].entry = alarm_msix_id; | 
 | 	vdev->vxge_entries[j].entry = alarm_msix_id; | 
 | 	vdev->vxge_entries[j].in_use = 0; | 
 |  | 
 | 	ret = pci_enable_msix(vdev->pdev, vdev->entries, intr_cnt); | 
 | 	/* if driver request exceeeds available irq's, request with a small | 
 | 	 * number. | 
 | 	*/ | 
 | 	if (ret > 0) { | 
 | 		vxge_debug_init(VXGE_ERR, | 
 | 			"%s: MSI-X enable failed for %d vectors, available: %d", | 
 | 			VXGE_DRIVER_NAME, intr_cnt, ret); | 
 | 		vdev->max_vpath_supported = vdev->no_of_vpath; | 
 | 		intr_cnt = (vdev->max_vpath_supported * 2) + 1; | 
 |  | 
 | 		/* Reset the alarm vector setting */ | 
 | 		vdev->entries[j].entry = 0; | 
 | 		vdev->vxge_entries[j].entry = 0; | 
 |  | 
 | 		/* Initialize the alarm vector with new setting */ | 
 | 		vdev->entries[intr_cnt - 1].entry = alarm_msix_id; | 
 | 		vdev->vxge_entries[intr_cnt - 1].entry = alarm_msix_id; | 
 | 		vdev->vxge_entries[intr_cnt - 1].in_use = 0; | 
 |  | 
 | 		ret = pci_enable_msix(vdev->pdev, vdev->entries, intr_cnt); | 
 | 		if (!ret) | 
 | 			vxge_debug_init(VXGE_ERR, | 
 | 				"%s: MSI-X enabled for %d vectors", | 
 | 				VXGE_DRIVER_NAME, intr_cnt); | 
 | 	} | 
 |  | 
 | 	if (ret) { | 
 | 		vxge_debug_init(VXGE_ERR, | 
 | 			"%s: MSI-X enable failed for %d vectors, ret: %d", | 
 | 			VXGE_DRIVER_NAME, intr_cnt, ret); | 
 | 		kfree(vdev->entries); | 
 | 		kfree(vdev->vxge_entries); | 
 | 		vdev->entries = NULL; | 
 | 		vdev->vxge_entries = NULL; | 
 | 		return -ENODEV; | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int vxge_enable_msix(struct vxgedev *vdev) | 
 | { | 
 |  | 
 | 	int i, ret = 0; | 
 | 	enum vxge_hw_status status; | 
 | 	/* 0 - Tx, 1 - Rx  */ | 
 | 	int tim_msix_id[4]; | 
 | 	int alarm_msix_id = 0, msix_intr_vect = 0; | 
 | 	vdev->intr_cnt = 0; | 
 |  | 
 | 	/* allocate msix vectors */ | 
 | 	ret = vxge_alloc_msix(vdev); | 
 | 	if (!ret) { | 
 | 		/* Last vector in the list is used for alarm */ | 
 | 		alarm_msix_id = | 
 | 			VXGE_HW_VPATH_MSIX_ACTIVE * vdev->no_of_vpath - 2; | 
 | 		for (i = 0; i < vdev->no_of_vpath; i++) { | 
 |  | 
 | 			/* If fifo or ring are not enabled | 
 | 			   the MSIX vector for that should be set to 0 | 
 | 			   Hence initializeing this array to all 0s. | 
 | 			*/ | 
 | 			memset(tim_msix_id, 0, sizeof(tim_msix_id)); | 
 | 			msix_intr_vect = i * VXGE_HW_VPATH_MSIX_ACTIVE; | 
 | 			tim_msix_id[0] = msix_intr_vect; | 
 |  | 
 | 			tim_msix_id[1] = msix_intr_vect + 1; | 
 | 			vdev->vpaths[i].ring.rx_vector_no = tim_msix_id[1]; | 
 |  | 
 | 			status = vxge_hw_vpath_msix_set( | 
 | 						vdev->vpaths[i].handle, | 
 | 						tim_msix_id, alarm_msix_id); | 
 | 			if (status != VXGE_HW_OK) { | 
 | 				vxge_debug_init(VXGE_ERR, | 
 | 					"vxge_hw_vpath_msix_set " | 
 | 					"failed with status : %x", status); | 
 | 				kfree(vdev->entries); | 
 | 				kfree(vdev->vxge_entries); | 
 | 				pci_disable_msix(vdev->pdev); | 
 | 				return -ENODEV; | 
 | 			} | 
 | 		} | 
 | 	} | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static void vxge_rem_msix_isr(struct vxgedev *vdev) | 
 | { | 
 | 	int intr_cnt; | 
 |  | 
 | 	for (intr_cnt = 0; intr_cnt < (vdev->max_vpath_supported * 2 + 1); | 
 | 		intr_cnt++) { | 
 | 		if (vdev->vxge_entries[intr_cnt].in_use) { | 
 | 			synchronize_irq(vdev->entries[intr_cnt].vector); | 
 | 			free_irq(vdev->entries[intr_cnt].vector, | 
 | 				vdev->vxge_entries[intr_cnt].arg); | 
 | 			vdev->vxge_entries[intr_cnt].in_use = 0; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	kfree(vdev->entries); | 
 | 	kfree(vdev->vxge_entries); | 
 | 	vdev->entries = NULL; | 
 | 	vdev->vxge_entries = NULL; | 
 |  | 
 | 	if (vdev->config.intr_type == MSI_X) | 
 | 		pci_disable_msix(vdev->pdev); | 
 | } | 
 | #endif | 
 |  | 
 | static void vxge_rem_isr(struct vxgedev *vdev) | 
 | { | 
 | 	struct __vxge_hw_device  *hldev; | 
 | 	hldev = (struct __vxge_hw_device  *) pci_get_drvdata(vdev->pdev); | 
 |  | 
 | #ifdef CONFIG_PCI_MSI | 
 | 	if (vdev->config.intr_type == MSI_X) { | 
 | 		vxge_rem_msix_isr(vdev); | 
 | 	} else | 
 | #endif | 
 | 	if (vdev->config.intr_type == INTA) { | 
 | 			synchronize_irq(vdev->pdev->irq); | 
 | 			free_irq(vdev->pdev->irq, vdev); | 
 | 	} | 
 | } | 
 |  | 
 | static int vxge_add_isr(struct vxgedev *vdev) | 
 | { | 
 | 	int ret = 0; | 
 | #ifdef CONFIG_PCI_MSI | 
 | 	int vp_idx = 0, intr_idx = 0, intr_cnt = 0, msix_idx = 0, irq_req = 0; | 
 | 	u64 function_mode = vdev->config.device_hw_info.function_mode; | 
 | 	int pci_fun = PCI_FUNC(vdev->pdev->devfn); | 
 |  | 
 | 	if (vdev->config.intr_type == MSI_X) | 
 | 		ret = vxge_enable_msix(vdev); | 
 |  | 
 | 	if (ret) { | 
 | 		vxge_debug_init(VXGE_ERR, | 
 | 			"%s: Enabling MSI-X Failed", VXGE_DRIVER_NAME); | 
 | 		if ((function_mode == VXGE_HW_FUNCTION_MODE_MULTI_FUNCTION) && | 
 | 			test_and_set_bit(__VXGE_STATE_CARD_UP, | 
 | 				&driver_config->inta_dev_open)) | 
 | 			return VXGE_HW_FAIL; | 
 | 		else { | 
 | 			vxge_debug_init(VXGE_ERR, | 
 | 				"%s: Defaulting to INTA", VXGE_DRIVER_NAME); | 
 | 			vdev->config.intr_type = INTA; | 
 | 			vxge_hw_device_set_intr_type(vdev->devh, | 
 | 				VXGE_HW_INTR_MODE_IRQLINE); | 
 | 			vxge_close_vpaths(vdev, 1); | 
 | 			vdev->no_of_vpath = 1; | 
 | 			vdev->stats.vpaths_open = 1; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (vdev->config.intr_type == MSI_X) { | 
 | 		for (intr_idx = 0; | 
 | 		     intr_idx < (vdev->no_of_vpath * | 
 | 			VXGE_HW_VPATH_MSIX_ACTIVE); intr_idx++) { | 
 |  | 
 | 			msix_idx = intr_idx % VXGE_HW_VPATH_MSIX_ACTIVE; | 
 | 			irq_req = 0; | 
 |  | 
 | 			switch (msix_idx) { | 
 | 			case 0: | 
 | 				snprintf(vdev->desc[intr_cnt], VXGE_INTR_STRLEN, | 
 | 					"%s:vxge fn: %d vpath: %d Tx MSI-X: %d", | 
 | 					vdev->ndev->name, pci_fun, vp_idx, | 
 | 					vdev->entries[intr_cnt].entry); | 
 | 				ret = request_irq( | 
 | 				    vdev->entries[intr_cnt].vector, | 
 | 					vxge_tx_msix_handle, 0, | 
 | 					vdev->desc[intr_cnt], | 
 | 					&vdev->vpaths[vp_idx].fifo); | 
 | 					vdev->vxge_entries[intr_cnt].arg = | 
 | 						&vdev->vpaths[vp_idx].fifo; | 
 | 				irq_req = 1; | 
 | 				break; | 
 | 			case 1: | 
 | 				snprintf(vdev->desc[intr_cnt], VXGE_INTR_STRLEN, | 
 | 					"%s:vxge fn: %d vpath: %d Rx MSI-X: %d", | 
 | 					vdev->ndev->name, pci_fun, vp_idx, | 
 | 					vdev->entries[intr_cnt].entry); | 
 | 				ret = request_irq( | 
 | 				    vdev->entries[intr_cnt].vector, | 
 | 					vxge_rx_msix_napi_handle, | 
 | 					0, | 
 | 					vdev->desc[intr_cnt], | 
 | 					&vdev->vpaths[vp_idx].ring); | 
 | 					vdev->vxge_entries[intr_cnt].arg = | 
 | 						&vdev->vpaths[vp_idx].ring; | 
 | 				irq_req = 1; | 
 | 				break; | 
 | 			} | 
 |  | 
 | 			if (ret) { | 
 | 				vxge_debug_init(VXGE_ERR, | 
 | 					"%s: MSIX - %d  Registration failed", | 
 | 					vdev->ndev->name, intr_cnt); | 
 | 				vxge_rem_msix_isr(vdev); | 
 | 				if ((function_mode == | 
 | 					VXGE_HW_FUNCTION_MODE_MULTI_FUNCTION) && | 
 | 					test_and_set_bit(__VXGE_STATE_CARD_UP, | 
 | 						&driver_config->inta_dev_open)) | 
 | 					return VXGE_HW_FAIL; | 
 | 				else { | 
 | 					vxge_hw_device_set_intr_type( | 
 | 						vdev->devh, | 
 | 						VXGE_HW_INTR_MODE_IRQLINE); | 
 | 						vdev->config.intr_type = INTA; | 
 | 					vxge_debug_init(VXGE_ERR, | 
 | 						"%s: Defaulting to INTA" | 
 | 						, vdev->ndev->name); | 
 | 					vxge_close_vpaths(vdev, 1); | 
 | 					vdev->no_of_vpath = 1; | 
 | 					vdev->stats.vpaths_open = 1; | 
 | 					goto INTA_MODE; | 
 | 				} | 
 | 			} | 
 |  | 
 | 			if (irq_req) { | 
 | 				/* We requested for this msix interrupt */ | 
 | 				vdev->vxge_entries[intr_cnt].in_use = 1; | 
 | 				vxge_hw_vpath_msix_unmask( | 
 | 					vdev->vpaths[vp_idx].handle, | 
 | 					intr_idx); | 
 | 				intr_cnt++; | 
 | 			} | 
 |  | 
 | 			/* Point to next vpath handler */ | 
 | 			if (((intr_idx + 1) % VXGE_HW_VPATH_MSIX_ACTIVE == 0) | 
 | 				&& (vp_idx < (vdev->no_of_vpath - 1))) | 
 | 					vp_idx++; | 
 | 		} | 
 |  | 
 | 		intr_cnt = vdev->max_vpath_supported * 2; | 
 | 		snprintf(vdev->desc[intr_cnt], VXGE_INTR_STRLEN, | 
 | 			"%s:vxge Alarm fn: %d MSI-X: %d", | 
 | 			vdev->ndev->name, pci_fun, | 
 | 			vdev->entries[intr_cnt].entry); | 
 | 		/* For Alarm interrupts */ | 
 | 		ret = request_irq(vdev->entries[intr_cnt].vector, | 
 | 					vxge_alarm_msix_handle, 0, | 
 | 					vdev->desc[intr_cnt], | 
 | 					&vdev->vpaths[vp_idx]); | 
 | 		if (ret) { | 
 | 			vxge_debug_init(VXGE_ERR, | 
 | 				"%s: MSIX - %d Registration failed", | 
 | 				vdev->ndev->name, intr_cnt); | 
 | 			vxge_rem_msix_isr(vdev); | 
 | 			if ((function_mode == | 
 | 				VXGE_HW_FUNCTION_MODE_MULTI_FUNCTION) && | 
 | 				test_and_set_bit(__VXGE_STATE_CARD_UP, | 
 | 						&driver_config->inta_dev_open)) | 
 | 				return VXGE_HW_FAIL; | 
 | 			else { | 
 | 				vxge_hw_device_set_intr_type(vdev->devh, | 
 | 						VXGE_HW_INTR_MODE_IRQLINE); | 
 | 				vdev->config.intr_type = INTA; | 
 | 				vxge_debug_init(VXGE_ERR, | 
 | 					"%s: Defaulting to INTA", | 
 | 					vdev->ndev->name); | 
 | 				vxge_close_vpaths(vdev, 1); | 
 | 				vdev->no_of_vpath = 1; | 
 | 				vdev->stats.vpaths_open = 1; | 
 | 				goto INTA_MODE; | 
 | 			} | 
 | 		} | 
 |  | 
 | 		vxge_hw_vpath_msix_unmask(vdev->vpaths[vp_idx].handle, | 
 | 					intr_idx - 2); | 
 | 		vdev->vxge_entries[intr_cnt].in_use = 1; | 
 | 		vdev->vxge_entries[intr_cnt].arg = &vdev->vpaths[vp_idx]; | 
 | 	} | 
 | INTA_MODE: | 
 | #endif | 
 | 	snprintf(vdev->desc[0], VXGE_INTR_STRLEN, "%s:vxge", vdev->ndev->name); | 
 |  | 
 | 	if (vdev->config.intr_type == INTA) { | 
 | 		ret = request_irq((int) vdev->pdev->irq, | 
 | 			vxge_isr_napi, | 
 | 			IRQF_SHARED, vdev->desc[0], vdev); | 
 | 		if (ret) { | 
 | 			vxge_debug_init(VXGE_ERR, | 
 | 				"%s %s-%d: ISR registration failed", | 
 | 				VXGE_DRIVER_NAME, "IRQ", vdev->pdev->irq); | 
 | 			return -ENODEV; | 
 | 		} | 
 | 		vxge_debug_init(VXGE_TRACE, | 
 | 			"new %s-%d line allocated", | 
 | 			"IRQ", vdev->pdev->irq); | 
 | 	} | 
 |  | 
 | 	return VXGE_HW_OK; | 
 | } | 
 |  | 
 | static void vxge_poll_vp_reset(unsigned long data) | 
 | { | 
 | 	struct vxgedev *vdev = (struct vxgedev *)data; | 
 | 	int i, j = 0; | 
 |  | 
 | 	for (i = 0; i < vdev->no_of_vpath; i++) { | 
 | 		if (test_bit(i, &vdev->vp_reset)) { | 
 | 			vxge_reset_vpath(vdev, i); | 
 | 			j++; | 
 | 		} | 
 | 	} | 
 | 	if (j && (vdev->config.intr_type != MSI_X)) { | 
 | 		vxge_hw_device_unmask_all(vdev->devh); | 
 | 		vxge_hw_device_flush_io(vdev->devh); | 
 | 	} | 
 |  | 
 | 	mod_timer(&vdev->vp_reset_timer, jiffies + HZ / 2); | 
 | } | 
 |  | 
 | static void vxge_poll_vp_lockup(unsigned long data) | 
 | { | 
 | 	struct vxgedev *vdev = (struct vxgedev *)data; | 
 | 	int i; | 
 | 	struct vxge_ring *ring; | 
 | 	enum vxge_hw_status status = VXGE_HW_OK; | 
 |  | 
 | 	for (i = 0; i < vdev->no_of_vpath; i++) { | 
 | 		ring = &vdev->vpaths[i].ring; | 
 | 		/* Did this vpath received any packets */ | 
 | 		if (ring->stats.prev_rx_frms == ring->stats.rx_frms) { | 
 | 			status = vxge_hw_vpath_check_leak(ring->handle); | 
 |  | 
 | 			/* Did it received any packets last time */ | 
 | 			if ((VXGE_HW_FAIL == status) && | 
 | 				(VXGE_HW_FAIL == ring->last_status)) { | 
 |  | 
 | 				/* schedule vpath reset */ | 
 | 				if (!test_and_set_bit(i, &vdev->vp_reset)) { | 
 |  | 
 | 					/* disable interrupts for this vpath */ | 
 | 					vxge_vpath_intr_disable(vdev, i); | 
 |  | 
 | 					/* stop the queue for this vpath */ | 
 | 					vxge_stop_tx_queue(&vdev->vpaths[i]. | 
 | 								fifo); | 
 | 					continue; | 
 | 				} | 
 | 			} | 
 | 		} | 
 | 		ring->stats.prev_rx_frms = ring->stats.rx_frms; | 
 | 		ring->last_status = status; | 
 | 	} | 
 |  | 
 | 	/* Check every 1 milli second */ | 
 | 	mod_timer(&vdev->vp_lockup_timer, jiffies + HZ / 1000); | 
 | } | 
 |  | 
 | /** | 
 |  * vxge_open | 
 |  * @dev: pointer to the device structure. | 
 |  * | 
 |  * This function is the open entry point of the driver. It mainly calls a | 
 |  * function to allocate Rx buffers and inserts them into the buffer | 
 |  * descriptors and then enables the Rx part of the NIC. | 
 |  * Return value: '0' on success and an appropriate (-)ve integer as | 
 |  * defined in errno.h file on failure. | 
 |  */ | 
 | int | 
 | vxge_open(struct net_device *dev) | 
 | { | 
 | 	enum vxge_hw_status status; | 
 | 	struct vxgedev *vdev; | 
 | 	struct __vxge_hw_device *hldev; | 
 | 	int ret = 0; | 
 | 	int i; | 
 | 	u64 val64, function_mode; | 
 | 	vxge_debug_entryexit(VXGE_TRACE, | 
 | 		"%s: %s:%d", dev->name, __func__, __LINE__); | 
 |  | 
 | 	vdev = (struct vxgedev *)netdev_priv(dev); | 
 | 	hldev = (struct __vxge_hw_device *) pci_get_drvdata(vdev->pdev); | 
 | 	function_mode = vdev->config.device_hw_info.function_mode; | 
 |  | 
 | 	/* make sure you have link off by default every time Nic is | 
 | 	 * initialized */ | 
 | 	netif_carrier_off(dev); | 
 |  | 
 | 	/* Check for another device already opn with INTA */ | 
 | 	if ((function_mode == VXGE_HW_FUNCTION_MODE_MULTI_FUNCTION) && | 
 | 		test_bit(__VXGE_STATE_CARD_UP, &driver_config->inta_dev_open)) { | 
 | 		ret = -EPERM; | 
 | 		goto out0; | 
 | 	} | 
 |  | 
 | 	/* Open VPATHs */ | 
 | 	status = vxge_open_vpaths(vdev); | 
 | 	if (status != VXGE_HW_OK) { | 
 | 		vxge_debug_init(VXGE_ERR, | 
 | 			"%s: fatal: Vpath open failed", vdev->ndev->name); | 
 | 		ret = -EPERM; | 
 | 		goto out0; | 
 | 	} | 
 |  | 
 | 	vdev->mtu = dev->mtu; | 
 |  | 
 | 	status = vxge_add_isr(vdev); | 
 | 	if (status != VXGE_HW_OK) { | 
 | 		vxge_debug_init(VXGE_ERR, | 
 | 			"%s: fatal: ISR add failed", dev->name); | 
 | 		ret = -EPERM; | 
 | 		goto out1; | 
 | 	} | 
 |  | 
 |  | 
 | 	if (vdev->config.intr_type != MSI_X) { | 
 | 		netif_napi_add(dev, &vdev->napi, vxge_poll_inta, | 
 | 			vdev->config.napi_weight); | 
 | 		napi_enable(&vdev->napi); | 
 | 		for (i = 0; i < vdev->no_of_vpath; i++) | 
 | 			vdev->vpaths[i].ring.napi_p = &vdev->napi; | 
 | 	} else { | 
 | 		for (i = 0; i < vdev->no_of_vpath; i++) { | 
 | 			netif_napi_add(dev, &vdev->vpaths[i].ring.napi, | 
 | 			    vxge_poll_msix, vdev->config.napi_weight); | 
 | 			napi_enable(&vdev->vpaths[i].ring.napi); | 
 | 			vdev->vpaths[i].ring.napi_p = | 
 | 				&vdev->vpaths[i].ring.napi; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	/* configure RTH */ | 
 | 	if (vdev->config.rth_steering) { | 
 | 		status = vxge_rth_configure(vdev); | 
 | 		if (status != VXGE_HW_OK) { | 
 | 			vxge_debug_init(VXGE_ERR, | 
 | 				"%s: fatal: RTH configuration failed", | 
 | 				dev->name); | 
 | 			ret = -EPERM; | 
 | 			goto out2; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	for (i = 0; i < vdev->no_of_vpath; i++) { | 
 | 		/* set initial mtu before enabling the device */ | 
 | 		status = vxge_hw_vpath_mtu_set(vdev->vpaths[i].handle, | 
 | 						vdev->mtu); | 
 | 		if (status != VXGE_HW_OK) { | 
 | 			vxge_debug_init(VXGE_ERR, | 
 | 				"%s: fatal: can not set new MTU", dev->name); | 
 | 			ret = -EPERM; | 
 | 			goto out2; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	VXGE_DEVICE_DEBUG_LEVEL_SET(VXGE_TRACE, VXGE_COMPONENT_LL, vdev); | 
 | 	vxge_debug_init(vdev->level_trace, | 
 | 		"%s: MTU is %d", vdev->ndev->name, vdev->mtu); | 
 | 	VXGE_DEVICE_DEBUG_LEVEL_SET(VXGE_ERR, VXGE_COMPONENT_LL, vdev); | 
 |  | 
 | 	/* Reprogram the DA table with populated mac addresses */ | 
 | 	for (i = 0; i < vdev->no_of_vpath; i++) { | 
 | 		vxge_restore_vpath_mac_addr(&vdev->vpaths[i]); | 
 | 		vxge_restore_vpath_vid_table(&vdev->vpaths[i]); | 
 | 	} | 
 |  | 
 | 	/* Enable vpath to sniff all unicast/multicast traffic that not | 
 | 	 * addressed to them. We allow promiscous mode for PF only | 
 | 	 */ | 
 |  | 
 | 	val64 = 0; | 
 | 	for (i = 0; i < VXGE_HW_MAX_VIRTUAL_PATHS; i++) | 
 | 		val64 |= VXGE_HW_RXMAC_AUTHORIZE_ALL_ADDR_VP(i); | 
 |  | 
 | 	vxge_hw_mgmt_reg_write(vdev->devh, | 
 | 		vxge_hw_mgmt_reg_type_mrpcim, | 
 | 		0, | 
 | 		(ulong)offsetof(struct vxge_hw_mrpcim_reg, | 
 | 			rxmac_authorize_all_addr), | 
 | 		val64); | 
 |  | 
 | 	vxge_hw_mgmt_reg_write(vdev->devh, | 
 | 		vxge_hw_mgmt_reg_type_mrpcim, | 
 | 		0, | 
 | 		(ulong)offsetof(struct vxge_hw_mrpcim_reg, | 
 | 			rxmac_authorize_all_vid), | 
 | 		val64); | 
 |  | 
 | 	vxge_set_multicast(dev); | 
 |  | 
 | 	/* Enabling Bcast and mcast for all vpath */ | 
 | 	for (i = 0; i < vdev->no_of_vpath; i++) { | 
 | 		status = vxge_hw_vpath_bcast_enable(vdev->vpaths[i].handle); | 
 | 		if (status != VXGE_HW_OK) | 
 | 			vxge_debug_init(VXGE_ERR, | 
 | 				"%s : Can not enable bcast for vpath " | 
 | 				"id %d", dev->name, i); | 
 | 		if (vdev->config.addr_learn_en) { | 
 | 			status = | 
 | 			    vxge_hw_vpath_mcast_enable(vdev->vpaths[i].handle); | 
 | 			if (status != VXGE_HW_OK) | 
 | 				vxge_debug_init(VXGE_ERR, | 
 | 					"%s : Can not enable mcast for vpath " | 
 | 					"id %d", dev->name, i); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	vxge_hw_device_setpause_data(vdev->devh, 0, | 
 | 		vdev->config.tx_pause_enable, | 
 | 		vdev->config.rx_pause_enable); | 
 |  | 
 | 	if (vdev->vp_reset_timer.function == NULL) | 
 | 		vxge_os_timer(vdev->vp_reset_timer, | 
 | 			vxge_poll_vp_reset, vdev, (HZ/2)); | 
 |  | 
 | 	if (vdev->vp_lockup_timer.function == NULL) | 
 | 		vxge_os_timer(vdev->vp_lockup_timer, | 
 | 			vxge_poll_vp_lockup, vdev, (HZ/2)); | 
 |  | 
 | 	set_bit(__VXGE_STATE_CARD_UP, &vdev->state); | 
 |  | 
 | 	smp_wmb(); | 
 |  | 
 | 	if (vxge_hw_device_link_state_get(vdev->devh) == VXGE_HW_LINK_UP) { | 
 | 		netif_carrier_on(vdev->ndev); | 
 | 		printk(KERN_NOTICE "%s: Link Up\n", vdev->ndev->name); | 
 | 		vdev->stats.link_up++; | 
 | 	} | 
 |  | 
 | 	vxge_hw_device_intr_enable(vdev->devh); | 
 |  | 
 | 	smp_wmb(); | 
 |  | 
 | 	for (i = 0; i < vdev->no_of_vpath; i++) { | 
 | 		vxge_hw_vpath_enable(vdev->vpaths[i].handle); | 
 | 		smp_wmb(); | 
 | 		vxge_hw_vpath_rx_doorbell_init(vdev->vpaths[i].handle); | 
 | 	} | 
 |  | 
 | 	vxge_start_all_tx_queue(vdev); | 
 | 	goto out0; | 
 |  | 
 | out2: | 
 | 	vxge_rem_isr(vdev); | 
 |  | 
 | 	/* Disable napi */ | 
 | 	if (vdev->config.intr_type != MSI_X) | 
 | 		napi_disable(&vdev->napi); | 
 | 	else { | 
 | 		for (i = 0; i < vdev->no_of_vpath; i++) | 
 | 			napi_disable(&vdev->vpaths[i].ring.napi); | 
 | 	} | 
 |  | 
 | out1: | 
 | 	vxge_close_vpaths(vdev, 0); | 
 | out0: | 
 | 	vxge_debug_entryexit(VXGE_TRACE, | 
 | 				"%s: %s:%d  Exiting...", | 
 | 				dev->name, __func__, __LINE__); | 
 | 	return ret; | 
 | } | 
 |  | 
 | /* Loop throught the mac address list and delete all the entries */ | 
 | void vxge_free_mac_add_list(struct vxge_vpath *vpath) | 
 | { | 
 |  | 
 | 	struct list_head *entry, *next; | 
 | 	if (list_empty(&vpath->mac_addr_list)) | 
 | 		return; | 
 |  | 
 | 	list_for_each_safe(entry, next, &vpath->mac_addr_list) { | 
 | 		list_del(entry); | 
 | 		kfree((struct vxge_mac_addrs *)entry); | 
 | 	} | 
 | } | 
 |  | 
 | static void vxge_napi_del_all(struct vxgedev *vdev) | 
 | { | 
 | 	int i; | 
 | 	if (vdev->config.intr_type != MSI_X) | 
 | 		netif_napi_del(&vdev->napi); | 
 | 	else { | 
 | 		for (i = 0; i < vdev->no_of_vpath; i++) | 
 | 			netif_napi_del(&vdev->vpaths[i].ring.napi); | 
 | 	} | 
 | 	return; | 
 | } | 
 |  | 
 | int do_vxge_close(struct net_device *dev, int do_io) | 
 | { | 
 | 	enum vxge_hw_status status; | 
 | 	struct vxgedev *vdev; | 
 | 	struct __vxge_hw_device *hldev; | 
 | 	int i; | 
 | 	u64 val64, vpath_vector; | 
 | 	vxge_debug_entryexit(VXGE_TRACE, "%s: %s:%d", | 
 | 		dev->name, __func__, __LINE__); | 
 |  | 
 | 	vdev = (struct vxgedev *)netdev_priv(dev); | 
 | 	hldev = (struct __vxge_hw_device *) pci_get_drvdata(vdev->pdev); | 
 |  | 
 | 	if (unlikely(!is_vxge_card_up(vdev))) | 
 | 		return 0; | 
 |  | 
 | 	/* If vxge_handle_crit_err task is executing, | 
 | 	 * wait till it completes. */ | 
 | 	while (test_and_set_bit(__VXGE_STATE_RESET_CARD, &vdev->state)) | 
 | 		msleep(50); | 
 |  | 
 | 	clear_bit(__VXGE_STATE_CARD_UP, &vdev->state); | 
 | 	if (do_io) { | 
 | 		/* Put the vpath back in normal mode */ | 
 | 		vpath_vector = vxge_mBIT(vdev->vpaths[0].device_id); | 
 | 		status = vxge_hw_mgmt_reg_read(vdev->devh, | 
 | 				vxge_hw_mgmt_reg_type_mrpcim, | 
 | 				0, | 
 | 				(ulong)offsetof( | 
 | 					struct vxge_hw_mrpcim_reg, | 
 | 					rts_mgr_cbasin_cfg), | 
 | 				&val64); | 
 |  | 
 | 		if (status == VXGE_HW_OK) { | 
 | 			val64 &= ~vpath_vector; | 
 | 			status = vxge_hw_mgmt_reg_write(vdev->devh, | 
 | 					vxge_hw_mgmt_reg_type_mrpcim, | 
 | 					0, | 
 | 					(ulong)offsetof( | 
 | 						struct vxge_hw_mrpcim_reg, | 
 | 						rts_mgr_cbasin_cfg), | 
 | 					val64); | 
 | 		} | 
 |  | 
 | 		/* Remove the function 0 from promiscous mode */ | 
 | 		vxge_hw_mgmt_reg_write(vdev->devh, | 
 | 			vxge_hw_mgmt_reg_type_mrpcim, | 
 | 			0, | 
 | 			(ulong)offsetof(struct vxge_hw_mrpcim_reg, | 
 | 				rxmac_authorize_all_addr), | 
 | 			0); | 
 |  | 
 | 		vxge_hw_mgmt_reg_write(vdev->devh, | 
 | 			vxge_hw_mgmt_reg_type_mrpcim, | 
 | 			0, | 
 | 			(ulong)offsetof(struct vxge_hw_mrpcim_reg, | 
 | 				rxmac_authorize_all_vid), | 
 | 			0); | 
 |  | 
 | 		smp_wmb(); | 
 | 	} | 
 | 	del_timer_sync(&vdev->vp_lockup_timer); | 
 |  | 
 | 	del_timer_sync(&vdev->vp_reset_timer); | 
 |  | 
 | 	/* Disable napi */ | 
 | 	if (vdev->config.intr_type != MSI_X) | 
 | 		napi_disable(&vdev->napi); | 
 | 	else { | 
 | 		for (i = 0; i < vdev->no_of_vpath; i++) | 
 | 			napi_disable(&vdev->vpaths[i].ring.napi); | 
 | 	} | 
 |  | 
 | 	netif_carrier_off(vdev->ndev); | 
 | 	printk(KERN_NOTICE "%s: Link Down\n", vdev->ndev->name); | 
 | 	vxge_stop_all_tx_queue(vdev); | 
 |  | 
 | 	/* Note that at this point xmit() is stopped by upper layer */ | 
 | 	if (do_io) | 
 | 		vxge_hw_device_intr_disable(vdev->devh); | 
 |  | 
 | 	mdelay(1000); | 
 |  | 
 | 	vxge_rem_isr(vdev); | 
 |  | 
 | 	vxge_napi_del_all(vdev); | 
 |  | 
 | 	if (do_io) | 
 | 		vxge_reset_all_vpaths(vdev); | 
 |  | 
 | 	vxge_close_vpaths(vdev, 0); | 
 |  | 
 | 	vxge_debug_entryexit(VXGE_TRACE, | 
 | 		"%s: %s:%d  Exiting...", dev->name, __func__, __LINE__); | 
 |  | 
 | 	clear_bit(__VXGE_STATE_CARD_UP, &driver_config->inta_dev_open); | 
 | 	clear_bit(__VXGE_STATE_RESET_CARD, &vdev->state); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /** | 
 |  * vxge_close | 
 |  * @dev: device pointer. | 
 |  * | 
 |  * This is the stop entry point of the driver. It needs to undo exactly | 
 |  * whatever was done by the open entry point, thus it's usually referred to | 
 |  * as the close function.Among other things this function mainly stops the | 
 |  * Rx side of the NIC and frees all the Rx buffers in the Rx rings. | 
 |  * Return value: '0' on success and an appropriate (-)ve integer as | 
 |  * defined in errno.h file on failure. | 
 |  */ | 
 | int | 
 | vxge_close(struct net_device *dev) | 
 | { | 
 | 	do_vxge_close(dev, 1); | 
 | 	return 0; | 
 | } | 
 |  | 
 | /** | 
 |  * vxge_change_mtu | 
 |  * @dev: net device pointer. | 
 |  * @new_mtu :the new MTU size for the device. | 
 |  * | 
 |  * A driver entry point to change MTU size for the device. Before changing | 
 |  * the MTU the device must be stopped. | 
 |  */ | 
 | static int vxge_change_mtu(struct net_device *dev, int new_mtu) | 
 | { | 
 | 	struct vxgedev *vdev = netdev_priv(dev); | 
 |  | 
 | 	vxge_debug_entryexit(vdev->level_trace, | 
 | 		"%s:%d", __func__, __LINE__); | 
 | 	if ((new_mtu < VXGE_HW_MIN_MTU) || (new_mtu > VXGE_HW_MAX_MTU)) { | 
 | 		vxge_debug_init(vdev->level_err, | 
 | 			"%s: mtu size is invalid", dev->name); | 
 | 		return -EPERM; | 
 | 	} | 
 |  | 
 | 	/* check if device is down already */ | 
 | 	if (unlikely(!is_vxge_card_up(vdev))) { | 
 | 		/* just store new value, will use later on open() */ | 
 | 		dev->mtu = new_mtu; | 
 | 		vxge_debug_init(vdev->level_err, | 
 | 			"%s", "device is down on MTU change"); | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	vxge_debug_init(vdev->level_trace, | 
 | 		"trying to apply new MTU %d", new_mtu); | 
 |  | 
 | 	if (vxge_close(dev)) | 
 | 		return -EIO; | 
 |  | 
 | 	dev->mtu = new_mtu; | 
 | 	vdev->mtu = new_mtu; | 
 |  | 
 | 	if (vxge_open(dev)) | 
 | 		return -EIO; | 
 |  | 
 | 	vxge_debug_init(vdev->level_trace, | 
 | 		"%s: MTU changed to %d", vdev->ndev->name, new_mtu); | 
 |  | 
 | 	vxge_debug_entryexit(vdev->level_trace, | 
 | 		"%s:%d  Exiting...", __func__, __LINE__); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /** | 
 |  * vxge_get_stats | 
 |  * @dev: pointer to the device structure | 
 |  * | 
 |  * Updates the device statistics structure. This function updates the device | 
 |  * statistics structure in the net_device structure and returns a pointer | 
 |  * to the same. | 
 |  */ | 
 | static struct net_device_stats * | 
 | vxge_get_stats(struct net_device *dev) | 
 | { | 
 | 	struct vxgedev *vdev; | 
 | 	struct net_device_stats *net_stats; | 
 | 	int k; | 
 |  | 
 | 	vdev = netdev_priv(dev); | 
 |  | 
 | 	net_stats = &vdev->stats.net_stats; | 
 |  | 
 | 	memset(net_stats, 0, sizeof(struct net_device_stats)); | 
 |  | 
 | 	for (k = 0; k < vdev->no_of_vpath; k++) { | 
 | 		net_stats->rx_packets += vdev->vpaths[k].ring.stats.rx_frms; | 
 | 		net_stats->rx_bytes += vdev->vpaths[k].ring.stats.rx_bytes; | 
 | 		net_stats->rx_errors += vdev->vpaths[k].ring.stats.rx_errors; | 
 | 		net_stats->multicast += vdev->vpaths[k].ring.stats.rx_mcast; | 
 | 		net_stats->rx_dropped += | 
 | 			vdev->vpaths[k].ring.stats.rx_dropped; | 
 |  | 
 | 		net_stats->tx_packets += vdev->vpaths[k].fifo.stats.tx_frms; | 
 | 		net_stats->tx_bytes += vdev->vpaths[k].fifo.stats.tx_bytes; | 
 | 		net_stats->tx_errors += vdev->vpaths[k].fifo.stats.tx_errors; | 
 | 	} | 
 |  | 
 | 	return net_stats; | 
 | } | 
 |  | 
 | /** | 
 |  * vxge_ioctl | 
 |  * @dev: Device pointer. | 
 |  * @ifr: An IOCTL specific structure, that can contain a pointer to | 
 |  *       a proprietary structure used to pass information to the driver. | 
 |  * @cmd: This is used to distinguish between the different commands that | 
 |  *       can be passed to the IOCTL functions. | 
 |  * | 
 |  * Entry point for the Ioctl. | 
 |  */ | 
 | static int vxge_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) | 
 | { | 
 | 	return -EOPNOTSUPP; | 
 | } | 
 |  | 
 | /** | 
 |  * vxge_tx_watchdog | 
 |  * @dev: pointer to net device structure | 
 |  * | 
 |  * Watchdog for transmit side. | 
 |  * This function is triggered if the Tx Queue is stopped | 
 |  * for a pre-defined amount of time when the Interface is still up. | 
 |  */ | 
 | static void | 
 | vxge_tx_watchdog(struct net_device *dev) | 
 | { | 
 | 	struct vxgedev *vdev; | 
 |  | 
 | 	vxge_debug_entryexit(VXGE_TRACE, "%s:%d", __func__, __LINE__); | 
 |  | 
 | 	vdev = (struct vxgedev *)netdev_priv(dev); | 
 |  | 
 | 	vdev->cric_err_event = VXGE_HW_EVENT_RESET_START; | 
 |  | 
 | 	vxge_reset(vdev); | 
 | 	vxge_debug_entryexit(VXGE_TRACE, | 
 | 		"%s:%d  Exiting...", __func__, __LINE__); | 
 | } | 
 |  | 
 | /** | 
 |  * vxge_vlan_rx_register | 
 |  * @dev: net device pointer. | 
 |  * @grp: vlan group | 
 |  * | 
 |  * Vlan group registration | 
 |  */ | 
 | static void | 
 | vxge_vlan_rx_register(struct net_device *dev, struct vlan_group *grp) | 
 | { | 
 | 	struct vxgedev *vdev; | 
 | 	struct vxge_vpath *vpath; | 
 | 	int vp; | 
 | 	u64 vid; | 
 | 	enum vxge_hw_status status; | 
 | 	int i; | 
 |  | 
 | 	vxge_debug_entryexit(VXGE_TRACE, "%s:%d", __func__, __LINE__); | 
 |  | 
 | 	vdev = (struct vxgedev *)netdev_priv(dev); | 
 |  | 
 | 	vpath = &vdev->vpaths[0]; | 
 | 	if ((NULL == grp) && (vpath->is_open)) { | 
 | 		/* Get the first vlan */ | 
 | 		status = vxge_hw_vpath_vid_get(vpath->handle, &vid); | 
 |  | 
 | 		while (status == VXGE_HW_OK) { | 
 |  | 
 | 			/* Delete this vlan from the vid table */ | 
 | 			for (vp = 0; vp < vdev->no_of_vpath; vp++) { | 
 | 				vpath = &vdev->vpaths[vp]; | 
 | 				if (!vpath->is_open) | 
 | 					continue; | 
 |  | 
 | 				vxge_hw_vpath_vid_delete(vpath->handle, vid); | 
 | 			} | 
 |  | 
 | 			/* Get the next vlan to be deleted */ | 
 | 			vpath = &vdev->vpaths[0]; | 
 | 			status = vxge_hw_vpath_vid_get(vpath->handle, &vid); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	vdev->vlgrp = grp; | 
 |  | 
 | 	for (i = 0; i < vdev->no_of_vpath; i++) { | 
 | 		if (vdev->vpaths[i].is_configured) | 
 | 			vdev->vpaths[i].ring.vlgrp = grp; | 
 | 	} | 
 |  | 
 | 	vxge_debug_entryexit(VXGE_TRACE, | 
 | 		"%s:%d  Exiting...", __func__, __LINE__); | 
 | } | 
 |  | 
 | /** | 
 |  * vxge_vlan_rx_add_vid | 
 |  * @dev: net device pointer. | 
 |  * @vid: vid | 
 |  * | 
 |  * Add the vlan id to the devices vlan id table | 
 |  */ | 
 | static void | 
 | vxge_vlan_rx_add_vid(struct net_device *dev, unsigned short vid) | 
 | { | 
 | 	struct vxgedev *vdev; | 
 | 	struct vxge_vpath *vpath; | 
 | 	int vp_id; | 
 |  | 
 | 	vdev = (struct vxgedev *)netdev_priv(dev); | 
 |  | 
 | 	/* Add these vlan to the vid table */ | 
 | 	for (vp_id = 0; vp_id < vdev->no_of_vpath; vp_id++) { | 
 | 		vpath = &vdev->vpaths[vp_id]; | 
 | 		if (!vpath->is_open) | 
 | 			continue; | 
 | 		vxge_hw_vpath_vid_add(vpath->handle, vid); | 
 | 	} | 
 | } | 
 |  | 
 | /** | 
 |  * vxge_vlan_rx_add_vid | 
 |  * @dev: net device pointer. | 
 |  * @vid: vid | 
 |  * | 
 |  * Remove the vlan id from the device's vlan id table | 
 |  */ | 
 | static void | 
 | vxge_vlan_rx_kill_vid(struct net_device *dev, unsigned short vid) | 
 | { | 
 | 	struct vxgedev *vdev; | 
 | 	struct vxge_vpath *vpath; | 
 | 	int vp_id; | 
 |  | 
 | 	vxge_debug_entryexit(VXGE_TRACE, "%s:%d", __func__, __LINE__); | 
 |  | 
 | 	vdev = (struct vxgedev *)netdev_priv(dev); | 
 |  | 
 | 	vlan_group_set_device(vdev->vlgrp, vid, NULL); | 
 |  | 
 | 	/* Delete this vlan from the vid table */ | 
 | 	for (vp_id = 0; vp_id < vdev->no_of_vpath; vp_id++) { | 
 | 		vpath = &vdev->vpaths[vp_id]; | 
 | 		if (!vpath->is_open) | 
 | 			continue; | 
 | 		vxge_hw_vpath_vid_delete(vpath->handle, vid); | 
 | 	} | 
 | 	vxge_debug_entryexit(VXGE_TRACE, | 
 | 		"%s:%d  Exiting...", __func__, __LINE__); | 
 | } | 
 |  | 
 | static const struct net_device_ops vxge_netdev_ops = { | 
 | 	.ndo_open               = vxge_open, | 
 | 	.ndo_stop               = vxge_close, | 
 | 	.ndo_get_stats          = vxge_get_stats, | 
 | 	.ndo_start_xmit         = vxge_xmit, | 
 | 	.ndo_validate_addr      = eth_validate_addr, | 
 | 	.ndo_set_multicast_list = vxge_set_multicast, | 
 |  | 
 | 	.ndo_do_ioctl           = vxge_ioctl, | 
 |  | 
 | 	.ndo_set_mac_address    = vxge_set_mac_addr, | 
 | 	.ndo_change_mtu         = vxge_change_mtu, | 
 | 	.ndo_vlan_rx_register   = vxge_vlan_rx_register, | 
 | 	.ndo_vlan_rx_kill_vid   = vxge_vlan_rx_kill_vid, | 
 | 	.ndo_vlan_rx_add_vid	= vxge_vlan_rx_add_vid, | 
 |  | 
 | 	.ndo_tx_timeout         = vxge_tx_watchdog, | 
 | #ifdef CONFIG_NET_POLL_CONTROLLER | 
 | 	.ndo_poll_controller    = vxge_netpoll, | 
 | #endif | 
 | }; | 
 |  | 
 | int __devinit vxge_device_register(struct __vxge_hw_device *hldev, | 
 | 				   struct vxge_config *config, | 
 | 				   int high_dma, int no_of_vpath, | 
 | 				   struct vxgedev **vdev_out) | 
 | { | 
 | 	struct net_device *ndev; | 
 | 	enum vxge_hw_status status = VXGE_HW_OK; | 
 | 	struct vxgedev *vdev; | 
 | 	int i, ret = 0, no_of_queue = 1; | 
 | 	u64 stat; | 
 |  | 
 | 	*vdev_out = NULL; | 
 | 	if (config->tx_steering_type == TX_MULTIQ_STEERING) | 
 | 		no_of_queue = no_of_vpath; | 
 |  | 
 | 	ndev = alloc_etherdev_mq(sizeof(struct vxgedev), | 
 | 			no_of_queue); | 
 | 	if (ndev == NULL) { | 
 | 		vxge_debug_init( | 
 | 			vxge_hw_device_trace_level_get(hldev), | 
 | 		"%s : device allocation failed", __func__); | 
 | 		ret = -ENODEV; | 
 | 		goto _out0; | 
 | 	} | 
 |  | 
 | 	vxge_debug_entryexit( | 
 | 		vxge_hw_device_trace_level_get(hldev), | 
 | 		"%s: %s:%d  Entering...", | 
 | 		ndev->name, __func__, __LINE__); | 
 |  | 
 | 	vdev = netdev_priv(ndev); | 
 | 	memset(vdev, 0, sizeof(struct vxgedev)); | 
 |  | 
 | 	vdev->ndev = ndev; | 
 | 	vdev->devh = hldev; | 
 | 	vdev->pdev = hldev->pdev; | 
 | 	memcpy(&vdev->config, config, sizeof(struct vxge_config)); | 
 | 	vdev->rx_csum = 1;	/* Enable Rx CSUM by default. */ | 
 |  | 
 | 	SET_NETDEV_DEV(ndev, &vdev->pdev->dev); | 
 |  | 
 | 	ndev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX | | 
 | 				NETIF_F_HW_VLAN_FILTER; | 
 | 	/*  Driver entry points */ | 
 | 	ndev->irq = vdev->pdev->irq; | 
 | 	ndev->base_addr = (unsigned long) hldev->bar0; | 
 |  | 
 | 	ndev->netdev_ops = &vxge_netdev_ops; | 
 |  | 
 | 	ndev->watchdog_timeo = VXGE_LL_WATCH_DOG_TIMEOUT; | 
 |  | 
 | 	initialize_ethtool_ops(ndev); | 
 |  | 
 | 	/* Allocate memory for vpath */ | 
 | 	vdev->vpaths = kzalloc((sizeof(struct vxge_vpath)) * | 
 | 				no_of_vpath, GFP_KERNEL); | 
 | 	if (!vdev->vpaths) { | 
 | 		vxge_debug_init(VXGE_ERR, | 
 | 			"%s: vpath memory allocation failed", | 
 | 			vdev->ndev->name); | 
 | 		ret = -ENODEV; | 
 | 		goto _out1; | 
 | 	} | 
 |  | 
 | 	ndev->features |= NETIF_F_SG; | 
 |  | 
 | 	ndev->features |= NETIF_F_HW_CSUM; | 
 | 	vxge_debug_init(vxge_hw_device_trace_level_get(hldev), | 
 | 		"%s : checksuming enabled", __func__); | 
 |  | 
 | 	if (high_dma) { | 
 | 		ndev->features |= NETIF_F_HIGHDMA; | 
 | 		vxge_debug_init(vxge_hw_device_trace_level_get(hldev), | 
 | 			"%s : using High DMA", __func__); | 
 | 	} | 
 |  | 
 | 	ndev->features |= NETIF_F_TSO | NETIF_F_TSO6; | 
 |  | 
 | 	if (vdev->config.gro_enable) | 
 | 		ndev->features |= NETIF_F_GRO; | 
 |  | 
 | 	if (vdev->config.tx_steering_type == TX_MULTIQ_STEERING) | 
 | 		ndev->real_num_tx_queues = no_of_vpath; | 
 |  | 
 | #ifdef NETIF_F_LLTX | 
 | 	ndev->features |= NETIF_F_LLTX; | 
 | #endif | 
 |  | 
 | 	for (i = 0; i < no_of_vpath; i++) | 
 | 		spin_lock_init(&vdev->vpaths[i].fifo.tx_lock); | 
 |  | 
 | 	if (register_netdev(ndev)) { | 
 | 		vxge_debug_init(vxge_hw_device_trace_level_get(hldev), | 
 | 			"%s: %s : device registration failed!", | 
 | 			ndev->name, __func__); | 
 | 		ret = -ENODEV; | 
 | 		goto _out2; | 
 | 	} | 
 |  | 
 | 	/*  Set the factory defined MAC address initially */ | 
 | 	ndev->addr_len = ETH_ALEN; | 
 |  | 
 | 	/* Make Link state as off at this point, when the Link change | 
 | 	 * interrupt comes the state will be automatically changed to | 
 | 	 * the right state. | 
 | 	 */ | 
 | 	netif_carrier_off(ndev); | 
 |  | 
 | 	vxge_debug_init(vxge_hw_device_trace_level_get(hldev), | 
 | 		"%s: Ethernet device registered", | 
 | 		ndev->name); | 
 |  | 
 | 	*vdev_out = vdev; | 
 |  | 
 | 	/* Resetting the Device stats */ | 
 | 	status = vxge_hw_mrpcim_stats_access( | 
 | 				hldev, | 
 | 				VXGE_HW_STATS_OP_CLEAR_ALL_STATS, | 
 | 				0, | 
 | 				0, | 
 | 				&stat); | 
 |  | 
 | 	if (status == VXGE_HW_ERR_PRIVILAGED_OPEARATION) | 
 | 		vxge_debug_init( | 
 | 			vxge_hw_device_trace_level_get(hldev), | 
 | 			"%s: device stats clear returns" | 
 | 			"VXGE_HW_ERR_PRIVILAGED_OPEARATION", ndev->name); | 
 |  | 
 | 	vxge_debug_entryexit(vxge_hw_device_trace_level_get(hldev), | 
 | 		"%s: %s:%d  Exiting...", | 
 | 		ndev->name, __func__, __LINE__); | 
 |  | 
 | 	return ret; | 
 | _out2: | 
 | 	kfree(vdev->vpaths); | 
 | _out1: | 
 | 	free_netdev(ndev); | 
 | _out0: | 
 | 	return ret; | 
 | } | 
 |  | 
 | /* | 
 |  * vxge_device_unregister | 
 |  * | 
 |  * This function will unregister and free network device | 
 |  */ | 
 | void | 
 | vxge_device_unregister(struct __vxge_hw_device *hldev) | 
 | { | 
 | 	struct vxgedev *vdev; | 
 | 	struct net_device *dev; | 
 | 	char buf[IFNAMSIZ]; | 
 | #if ((VXGE_DEBUG_INIT & VXGE_DEBUG_MASK) || \ | 
 | 	(VXGE_DEBUG_ENTRYEXIT & VXGE_DEBUG_MASK)) | 
 | 	u32 level_trace; | 
 | #endif | 
 |  | 
 | 	dev = hldev->ndev; | 
 | 	vdev = netdev_priv(dev); | 
 | #if ((VXGE_DEBUG_INIT & VXGE_DEBUG_MASK) || \ | 
 | 	(VXGE_DEBUG_ENTRYEXIT & VXGE_DEBUG_MASK)) | 
 | 	level_trace = vdev->level_trace; | 
 | #endif | 
 | 	vxge_debug_entryexit(level_trace, | 
 | 		"%s: %s:%d", vdev->ndev->name, __func__, __LINE__); | 
 |  | 
 | 	memcpy(buf, vdev->ndev->name, IFNAMSIZ); | 
 |  | 
 | 	/* in 2.6 will call stop() if device is up */ | 
 | 	unregister_netdev(dev); | 
 |  | 
 | 	flush_scheduled_work(); | 
 |  | 
 | 	vxge_debug_init(level_trace, "%s: ethernet device unregistered", buf); | 
 | 	vxge_debug_entryexit(level_trace, | 
 | 		"%s: %s:%d  Exiting...", buf, __func__, __LINE__); | 
 | } | 
 |  | 
 | /* | 
 |  * vxge_callback_crit_err | 
 |  * | 
 |  * This function is called by the alarm handler in interrupt context. | 
 |  * Driver must analyze it based on the event type. | 
 |  */ | 
 | static void | 
 | vxge_callback_crit_err(struct __vxge_hw_device *hldev, | 
 | 			enum vxge_hw_event type, u64 vp_id) | 
 | { | 
 | 	struct net_device *dev = hldev->ndev; | 
 | 	struct vxgedev *vdev = (struct vxgedev *)netdev_priv(dev); | 
 | 	int vpath_idx; | 
 |  | 
 | 	vxge_debug_entryexit(vdev->level_trace, | 
 | 		"%s: %s:%d", vdev->ndev->name, __func__, __LINE__); | 
 |  | 
 | 	/* Note: This event type should be used for device wide | 
 | 	 * indications only - Serious errors, Slot freeze and critical errors | 
 | 	 */ | 
 | 	vdev->cric_err_event = type; | 
 |  | 
 | 	for (vpath_idx = 0; vpath_idx < vdev->no_of_vpath; vpath_idx++) | 
 | 		if (vdev->vpaths[vpath_idx].device_id == vp_id) | 
 | 			break; | 
 |  | 
 | 	if (!test_bit(__VXGE_STATE_RESET_CARD, &vdev->state)) { | 
 | 		if (type == VXGE_HW_EVENT_SLOT_FREEZE) { | 
 | 			vxge_debug_init(VXGE_ERR, | 
 | 				"%s: Slot is frozen", vdev->ndev->name); | 
 | 		} else if (type == VXGE_HW_EVENT_SERR) { | 
 | 			vxge_debug_init(VXGE_ERR, | 
 | 				"%s: Encountered Serious Error", | 
 | 				vdev->ndev->name); | 
 | 		} else if (type == VXGE_HW_EVENT_CRITICAL_ERR) | 
 | 			vxge_debug_init(VXGE_ERR, | 
 | 				"%s: Encountered Critical Error", | 
 | 				vdev->ndev->name); | 
 | 	} | 
 |  | 
 | 	if ((type == VXGE_HW_EVENT_SERR) || | 
 | 		(type == VXGE_HW_EVENT_SLOT_FREEZE)) { | 
 | 		if (unlikely(vdev->exec_mode)) | 
 | 			clear_bit(__VXGE_STATE_CARD_UP, &vdev->state); | 
 | 	} else if (type == VXGE_HW_EVENT_CRITICAL_ERR) { | 
 | 		vxge_hw_device_mask_all(hldev); | 
 | 		if (unlikely(vdev->exec_mode)) | 
 | 			clear_bit(__VXGE_STATE_CARD_UP, &vdev->state); | 
 | 	} else if ((type == VXGE_HW_EVENT_FIFO_ERR) || | 
 | 		  (type == VXGE_HW_EVENT_VPATH_ERR)) { | 
 |  | 
 | 		if (unlikely(vdev->exec_mode)) | 
 | 			clear_bit(__VXGE_STATE_CARD_UP, &vdev->state); | 
 | 		else { | 
 | 			/* check if this vpath is already set for reset */ | 
 | 			if (!test_and_set_bit(vpath_idx, &vdev->vp_reset)) { | 
 |  | 
 | 				/* disable interrupts for this vpath */ | 
 | 				vxge_vpath_intr_disable(vdev, vpath_idx); | 
 |  | 
 | 				/* stop the queue for this vpath */ | 
 | 				vxge_stop_tx_queue(&vdev->vpaths[vpath_idx]. | 
 | 							fifo); | 
 | 			} | 
 | 		} | 
 | 	} | 
 |  | 
 | 	vxge_debug_entryexit(vdev->level_trace, | 
 | 		"%s: %s:%d  Exiting...", | 
 | 		vdev->ndev->name, __func__, __LINE__); | 
 | } | 
 |  | 
 | static void verify_bandwidth(void) | 
 | { | 
 | 	int i, band_width, total = 0, equal_priority = 0; | 
 |  | 
 | 	/* 1. If user enters 0 for some fifo, give equal priority to all */ | 
 | 	for (i = 0; i < VXGE_HW_MAX_VIRTUAL_PATHS; i++) { | 
 | 		if (bw_percentage[i] == 0) { | 
 | 			equal_priority = 1; | 
 | 			break; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (!equal_priority) { | 
 | 		/* 2. If sum exceeds 100, give equal priority to all */ | 
 | 		for (i = 0; i < VXGE_HW_MAX_VIRTUAL_PATHS; i++) { | 
 | 			if (bw_percentage[i] == 0xFF) | 
 | 				break; | 
 |  | 
 | 			total += bw_percentage[i]; | 
 | 			if (total > VXGE_HW_VPATH_BANDWIDTH_MAX) { | 
 | 				equal_priority = 1; | 
 | 				break; | 
 | 			} | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (!equal_priority) { | 
 | 		/* Is all the bandwidth consumed? */ | 
 | 		if (total < VXGE_HW_VPATH_BANDWIDTH_MAX) { | 
 | 			if (i < VXGE_HW_MAX_VIRTUAL_PATHS) { | 
 | 				/* Split rest of bw equally among next VPs*/ | 
 | 				band_width = | 
 | 				  (VXGE_HW_VPATH_BANDWIDTH_MAX  - total) / | 
 | 					(VXGE_HW_MAX_VIRTUAL_PATHS - i); | 
 | 				if (band_width < 2) /* min of 2% */ | 
 | 					equal_priority = 1; | 
 | 				else { | 
 | 					for (; i < VXGE_HW_MAX_VIRTUAL_PATHS; | 
 | 						i++) | 
 | 						bw_percentage[i] = | 
 | 							band_width; | 
 | 				} | 
 | 			} | 
 | 		} else if (i < VXGE_HW_MAX_VIRTUAL_PATHS) | 
 | 			equal_priority = 1; | 
 | 	} | 
 |  | 
 | 	if (equal_priority) { | 
 | 		vxge_debug_init(VXGE_ERR, | 
 | 			"%s: Assigning equal bandwidth to all the vpaths", | 
 | 			VXGE_DRIVER_NAME); | 
 | 		bw_percentage[0] = VXGE_HW_VPATH_BANDWIDTH_MAX / | 
 | 					VXGE_HW_MAX_VIRTUAL_PATHS; | 
 | 		for (i = 1; i < VXGE_HW_MAX_VIRTUAL_PATHS; i++) | 
 | 			bw_percentage[i] = bw_percentage[0]; | 
 | 	} | 
 |  | 
 | 	return; | 
 | } | 
 |  | 
 | /* | 
 |  * Vpath configuration | 
 |  */ | 
 | static int __devinit vxge_config_vpaths( | 
 | 			struct vxge_hw_device_config *device_config, | 
 | 			u64 vpath_mask, struct vxge_config *config_param) | 
 | { | 
 | 	int i, no_of_vpaths = 0, default_no_vpath = 0, temp; | 
 | 	u32 txdl_size, txdl_per_memblock; | 
 |  | 
 | 	temp = driver_config->vpath_per_dev; | 
 | 	if ((driver_config->vpath_per_dev == VXGE_USE_DEFAULT) && | 
 | 		(max_config_dev == VXGE_MAX_CONFIG_DEV)) { | 
 | 		/* No more CPU. Return vpath number as zero.*/ | 
 | 		if (driver_config->g_no_cpus == -1) | 
 | 			return 0; | 
 |  | 
 | 		if (!driver_config->g_no_cpus) | 
 | 			driver_config->g_no_cpus = num_online_cpus(); | 
 |  | 
 | 		driver_config->vpath_per_dev = driver_config->g_no_cpus >> 1; | 
 | 		if (!driver_config->vpath_per_dev) | 
 | 			driver_config->vpath_per_dev = 1; | 
 |  | 
 | 		for (i = 0; i < VXGE_HW_MAX_VIRTUAL_PATHS; i++) | 
 | 			if (!vxge_bVALn(vpath_mask, i, 1)) | 
 | 				continue; | 
 | 			else | 
 | 				default_no_vpath++; | 
 | 		if (default_no_vpath < driver_config->vpath_per_dev) | 
 | 			driver_config->vpath_per_dev = default_no_vpath; | 
 |  | 
 | 		driver_config->g_no_cpus = driver_config->g_no_cpus - | 
 | 				(driver_config->vpath_per_dev * 2); | 
 | 		if (driver_config->g_no_cpus <= 0) | 
 | 			driver_config->g_no_cpus = -1; | 
 | 	} | 
 |  | 
 | 	if (driver_config->vpath_per_dev == 1) { | 
 | 		vxge_debug_ll_config(VXGE_TRACE, | 
 | 			"%s: Disable tx and rx steering, " | 
 | 			"as single vpath is configured", VXGE_DRIVER_NAME); | 
 | 		config_param->rth_steering = NO_STEERING; | 
 | 		config_param->tx_steering_type = NO_STEERING; | 
 | 		device_config->rth_en = 0; | 
 | 	} | 
 |  | 
 | 	/* configure bandwidth */ | 
 | 	for (i = 0; i < VXGE_HW_MAX_VIRTUAL_PATHS; i++) | 
 | 		device_config->vp_config[i].min_bandwidth = bw_percentage[i]; | 
 |  | 
 | 	for (i = 0; i < VXGE_HW_MAX_VIRTUAL_PATHS; i++) { | 
 | 		device_config->vp_config[i].vp_id = i; | 
 | 		device_config->vp_config[i].mtu = VXGE_HW_DEFAULT_MTU; | 
 | 		if (no_of_vpaths < driver_config->vpath_per_dev) { | 
 | 			if (!vxge_bVALn(vpath_mask, i, 1)) { | 
 | 				vxge_debug_ll_config(VXGE_TRACE, | 
 | 					"%s: vpath: %d is not available", | 
 | 					VXGE_DRIVER_NAME, i); | 
 | 				continue; | 
 | 			} else { | 
 | 				vxge_debug_ll_config(VXGE_TRACE, | 
 | 					"%s: vpath: %d available", | 
 | 					VXGE_DRIVER_NAME, i); | 
 | 				no_of_vpaths++; | 
 | 			} | 
 | 		} else { | 
 | 			vxge_debug_ll_config(VXGE_TRACE, | 
 | 				"%s: vpath: %d is not configured, " | 
 | 				"max_config_vpath exceeded", | 
 | 				VXGE_DRIVER_NAME, i); | 
 | 			break; | 
 | 		} | 
 |  | 
 | 		/* Configure Tx fifo's */ | 
 | 		device_config->vp_config[i].fifo.enable = | 
 | 						VXGE_HW_FIFO_ENABLE; | 
 | 		device_config->vp_config[i].fifo.max_frags = | 
 | 				MAX_SKB_FRAGS; | 
 | 		device_config->vp_config[i].fifo.memblock_size = | 
 | 			VXGE_HW_MIN_FIFO_MEMBLOCK_SIZE; | 
 |  | 
 | 		txdl_size = MAX_SKB_FRAGS * sizeof(struct vxge_hw_fifo_txd); | 
 | 		txdl_per_memblock = VXGE_HW_MIN_FIFO_MEMBLOCK_SIZE / txdl_size; | 
 |  | 
 | 		device_config->vp_config[i].fifo.fifo_blocks = | 
 | 			((VXGE_DEF_FIFO_LENGTH - 1) / txdl_per_memblock) + 1; | 
 |  | 
 | 		device_config->vp_config[i].fifo.intr = | 
 | 				VXGE_HW_FIFO_QUEUE_INTR_DISABLE; | 
 |  | 
 | 		/* Configure tti properties */ | 
 | 		device_config->vp_config[i].tti.intr_enable = | 
 | 					VXGE_HW_TIM_INTR_ENABLE; | 
 |  | 
 | 		device_config->vp_config[i].tti.btimer_val = | 
 | 			(VXGE_TTI_BTIMER_VAL * 1000) / 272; | 
 |  | 
 | 		device_config->vp_config[i].tti.timer_ac_en = | 
 | 				VXGE_HW_TIM_TIMER_AC_ENABLE; | 
 |  | 
 | 		/* For msi-x with napi (each vector | 
 | 		has a handler of its own) - | 
 | 		Set CI to OFF for all vpaths */ | 
 | 		device_config->vp_config[i].tti.timer_ci_en = | 
 | 			VXGE_HW_TIM_TIMER_CI_DISABLE; | 
 |  | 
 | 		device_config->vp_config[i].tti.timer_ri_en = | 
 | 				VXGE_HW_TIM_TIMER_RI_DISABLE; | 
 |  | 
 | 		device_config->vp_config[i].tti.util_sel = | 
 | 			VXGE_HW_TIM_UTIL_SEL_LEGACY_TX_NET_UTIL; | 
 |  | 
 | 		device_config->vp_config[i].tti.ltimer_val = | 
 | 			(VXGE_TTI_LTIMER_VAL * 1000) / 272; | 
 |  | 
 | 		device_config->vp_config[i].tti.rtimer_val = | 
 | 			(VXGE_TTI_RTIMER_VAL * 1000) / 272; | 
 |  | 
 | 		device_config->vp_config[i].tti.urange_a = TTI_TX_URANGE_A; | 
 | 		device_config->vp_config[i].tti.urange_b = TTI_TX_URANGE_B; | 
 | 		device_config->vp_config[i].tti.urange_c = TTI_TX_URANGE_C; | 
 | 		device_config->vp_config[i].tti.uec_a = TTI_TX_UFC_A; | 
 | 		device_config->vp_config[i].tti.uec_b = TTI_TX_UFC_B; | 
 | 		device_config->vp_config[i].tti.uec_c = TTI_TX_UFC_C; | 
 | 		device_config->vp_config[i].tti.uec_d = TTI_TX_UFC_D; | 
 |  | 
 | 		/* Configure Rx rings */ | 
 | 		device_config->vp_config[i].ring.enable  = | 
 | 						VXGE_HW_RING_ENABLE; | 
 |  | 
 | 		device_config->vp_config[i].ring.ring_blocks  = | 
 | 						VXGE_HW_DEF_RING_BLOCKS; | 
 | 		device_config->vp_config[i].ring.buffer_mode = | 
 | 			VXGE_HW_RING_RXD_BUFFER_MODE_1; | 
 | 		device_config->vp_config[i].ring.rxds_limit  = | 
 | 				VXGE_HW_DEF_RING_RXDS_LIMIT; | 
 | 		device_config->vp_config[i].ring.scatter_mode = | 
 | 					VXGE_HW_RING_SCATTER_MODE_A; | 
 |  | 
 | 		/* Configure rti properties */ | 
 | 		device_config->vp_config[i].rti.intr_enable = | 
 | 					VXGE_HW_TIM_INTR_ENABLE; | 
 |  | 
 | 		device_config->vp_config[i].rti.btimer_val = | 
 | 			(VXGE_RTI_BTIMER_VAL * 1000)/272; | 
 |  | 
 | 		device_config->vp_config[i].rti.timer_ac_en = | 
 | 						VXGE_HW_TIM_TIMER_AC_ENABLE; | 
 |  | 
 | 		device_config->vp_config[i].rti.timer_ci_en = | 
 | 						VXGE_HW_TIM_TIMER_CI_DISABLE; | 
 |  | 
 | 		device_config->vp_config[i].rti.timer_ri_en = | 
 | 						VXGE_HW_TIM_TIMER_RI_DISABLE; | 
 |  | 
 | 		device_config->vp_config[i].rti.util_sel = | 
 | 				VXGE_HW_TIM_UTIL_SEL_LEGACY_RX_NET_UTIL; | 
 |  | 
 | 		device_config->vp_config[i].rti.urange_a = | 
 | 						RTI_RX_URANGE_A; | 
 | 		device_config->vp_config[i].rti.urange_b = | 
 | 						RTI_RX_URANGE_B; | 
 | 		device_config->vp_config[i].rti.urange_c = | 
 | 						RTI_RX_URANGE_C; | 
 | 		device_config->vp_config[i].rti.uec_a = RTI_RX_UFC_A; | 
 | 		device_config->vp_config[i].rti.uec_b = RTI_RX_UFC_B; | 
 | 		device_config->vp_config[i].rti.uec_c = RTI_RX_UFC_C; | 
 | 		device_config->vp_config[i].rti.uec_d = RTI_RX_UFC_D; | 
 |  | 
 | 		device_config->vp_config[i].rti.rtimer_val = | 
 | 			(VXGE_RTI_RTIMER_VAL * 1000) / 272; | 
 |  | 
 | 		device_config->vp_config[i].rti.ltimer_val = | 
 | 			(VXGE_RTI_LTIMER_VAL * 1000) / 272; | 
 |  | 
 | 		device_config->vp_config[i].rpa_strip_vlan_tag = | 
 | 			vlan_tag_strip; | 
 | 	} | 
 |  | 
 | 	driver_config->vpath_per_dev = temp; | 
 | 	return no_of_vpaths; | 
 | } | 
 |  | 
 | /* initialize device configuratrions */ | 
 | static void __devinit vxge_device_config_init( | 
 | 				struct vxge_hw_device_config *device_config, | 
 | 				int *intr_type) | 
 | { | 
 | 	/* Used for CQRQ/SRQ. */ | 
 | 	device_config->dma_blockpool_initial = | 
 | 			VXGE_HW_INITIAL_DMA_BLOCK_POOL_SIZE; | 
 |  | 
 | 	device_config->dma_blockpool_max = | 
 | 			VXGE_HW_MAX_DMA_BLOCK_POOL_SIZE; | 
 |  | 
 | 	if (max_mac_vpath > VXGE_MAX_MAC_ADDR_COUNT) | 
 | 		max_mac_vpath = VXGE_MAX_MAC_ADDR_COUNT; | 
 |  | 
 | #ifndef CONFIG_PCI_MSI | 
 | 	vxge_debug_init(VXGE_ERR, | 
 | 		"%s: This Kernel does not support " | 
 | 		"MSI-X. Defaulting to INTA", VXGE_DRIVER_NAME); | 
 | 	*intr_type = INTA; | 
 | #endif | 
 |  | 
 | 	/* Configure whether MSI-X or IRQL. */ | 
 | 	switch (*intr_type) { | 
 | 	case INTA: | 
 | 		device_config->intr_mode = VXGE_HW_INTR_MODE_IRQLINE; | 
 | 		break; | 
 |  | 
 | 	case MSI_X: | 
 | 		device_config->intr_mode = VXGE_HW_INTR_MODE_MSIX; | 
 | 		break; | 
 | 	} | 
 | 	/* Timer period between device poll */ | 
 | 	device_config->device_poll_millis = VXGE_TIMER_DELAY; | 
 |  | 
 | 	/* Configure mac based steering. */ | 
 | 	device_config->rts_mac_en = addr_learn_en; | 
 |  | 
 | 	/* Configure Vpaths */ | 
 | 	device_config->rth_it_type = VXGE_HW_RTH_IT_TYPE_MULTI_IT; | 
 |  | 
 | 	vxge_debug_ll_config(VXGE_TRACE, "%s : Device Config Params ", | 
 | 			__func__); | 
 | 	vxge_debug_ll_config(VXGE_TRACE, "dma_blockpool_initial : %d", | 
 | 			device_config->dma_blockpool_initial); | 
 | 	vxge_debug_ll_config(VXGE_TRACE, "dma_blockpool_max : %d", | 
 | 			device_config->dma_blockpool_max); | 
 | 	vxge_debug_ll_config(VXGE_TRACE, "intr_mode : %d", | 
 | 			device_config->intr_mode); | 
 | 	vxge_debug_ll_config(VXGE_TRACE, "device_poll_millis : %d", | 
 | 			device_config->device_poll_millis); | 
 | 	vxge_debug_ll_config(VXGE_TRACE, "rts_mac_en : %d", | 
 | 			device_config->rts_mac_en); | 
 | 	vxge_debug_ll_config(VXGE_TRACE, "rth_en : %d", | 
 | 			device_config->rth_en); | 
 | 	vxge_debug_ll_config(VXGE_TRACE, "rth_it_type : %d", | 
 | 			device_config->rth_it_type); | 
 | } | 
 |  | 
 | static void __devinit vxge_print_parm(struct vxgedev *vdev, u64 vpath_mask) | 
 | { | 
 | 	int i; | 
 |  | 
 | 	vxge_debug_init(VXGE_TRACE, | 
 | 		"%s: %d Vpath(s) opened", | 
 | 		vdev->ndev->name, vdev->no_of_vpath); | 
 |  | 
 | 	switch (vdev->config.intr_type) { | 
 | 	case INTA: | 
 | 		vxge_debug_init(VXGE_TRACE, | 
 | 			"%s: Interrupt type INTA", vdev->ndev->name); | 
 | 		break; | 
 |  | 
 | 	case MSI_X: | 
 | 		vxge_debug_init(VXGE_TRACE, | 
 | 			"%s: Interrupt type MSI-X", vdev->ndev->name); | 
 | 		break; | 
 | 	} | 
 |  | 
 | 	if (vdev->config.rth_steering) { | 
 | 		vxge_debug_init(VXGE_TRACE, | 
 | 			"%s: RTH steering enabled for TCP_IPV4", | 
 | 			vdev->ndev->name); | 
 | 	} else { | 
 | 		vxge_debug_init(VXGE_TRACE, | 
 | 			"%s: RTH steering disabled", vdev->ndev->name); | 
 | 	} | 
 |  | 
 | 	switch (vdev->config.tx_steering_type) { | 
 | 	case NO_STEERING: | 
 | 		vxge_debug_init(VXGE_TRACE, | 
 | 			"%s: Tx steering disabled", vdev->ndev->name); | 
 | 		break; | 
 | 	case TX_PRIORITY_STEERING: | 
 | 		vxge_debug_init(VXGE_TRACE, | 
 | 			"%s: Unsupported tx steering option", | 
 | 			vdev->ndev->name); | 
 | 		vxge_debug_init(VXGE_TRACE, | 
 | 			"%s: Tx steering disabled", vdev->ndev->name); | 
 | 		vdev->config.tx_steering_type = 0; | 
 | 		break; | 
 | 	case TX_VLAN_STEERING: | 
 | 		vxge_debug_init(VXGE_TRACE, | 
 | 			"%s: Unsupported tx steering option", | 
 | 			vdev->ndev->name); | 
 | 		vxge_debug_init(VXGE_TRACE, | 
 | 			"%s: Tx steering disabled", vdev->ndev->name); | 
 | 		vdev->config.tx_steering_type = 0; | 
 | 		break; | 
 | 	case TX_MULTIQ_STEERING: | 
 | 		vxge_debug_init(VXGE_TRACE, | 
 | 			"%s: Tx multiqueue steering enabled", | 
 | 			vdev->ndev->name); | 
 | 		break; | 
 | 	case TX_PORT_STEERING: | 
 | 		vxge_debug_init(VXGE_TRACE, | 
 | 			"%s: Tx port steering enabled", | 
 | 			vdev->ndev->name); | 
 | 		break; | 
 | 	default: | 
 | 		vxge_debug_init(VXGE_ERR, | 
 | 			"%s: Unsupported tx steering type", | 
 | 			vdev->ndev->name); | 
 | 		vxge_debug_init(VXGE_TRACE, | 
 | 			"%s: Tx steering disabled", vdev->ndev->name); | 
 | 		vdev->config.tx_steering_type = 0; | 
 | 	} | 
 |  | 
 | 	if (vdev->config.gro_enable) { | 
 | 		vxge_debug_init(VXGE_ERR, | 
 | 			"%s: Generic receive offload enabled", | 
 | 			vdev->ndev->name); | 
 | 	} else | 
 | 		vxge_debug_init(VXGE_TRACE, | 
 | 			"%s: Generic receive offload disabled", | 
 | 			vdev->ndev->name); | 
 |  | 
 | 	if (vdev->config.addr_learn_en) | 
 | 		vxge_debug_init(VXGE_TRACE, | 
 | 			"%s: MAC Address learning enabled", vdev->ndev->name); | 
 |  | 
 | 	vxge_debug_init(VXGE_TRACE, | 
 | 		"%s: Rx doorbell mode enabled", vdev->ndev->name); | 
 |  | 
 | 	for (i = 0; i < VXGE_HW_MAX_VIRTUAL_PATHS; i++) { | 
 | 		if (!vxge_bVALn(vpath_mask, i, 1)) | 
 | 			continue; | 
 | 		vxge_debug_ll_config(VXGE_TRACE, | 
 | 			"%s: MTU size - %d", vdev->ndev->name, | 
 | 			((struct __vxge_hw_device  *)(vdev->devh))-> | 
 | 				config.vp_config[i].mtu); | 
 | 		vxge_debug_init(VXGE_TRACE, | 
 | 			"%s: VLAN tag stripping %s", vdev->ndev->name, | 
 | 			((struct __vxge_hw_device  *)(vdev->devh))-> | 
 | 				config.vp_config[i].rpa_strip_vlan_tag | 
 | 			? "Enabled" : "Disabled"); | 
 | 		vxge_debug_init(VXGE_TRACE, | 
 | 			"%s: Ring blocks : %d", vdev->ndev->name, | 
 | 			((struct __vxge_hw_device  *)(vdev->devh))-> | 
 | 				config.vp_config[i].ring.ring_blocks); | 
 | 		vxge_debug_init(VXGE_TRACE, | 
 | 			"%s: Fifo blocks : %d", vdev->ndev->name, | 
 | 			((struct __vxge_hw_device  *)(vdev->devh))-> | 
 | 				config.vp_config[i].fifo.fifo_blocks); | 
 | 		vxge_debug_ll_config(VXGE_TRACE, | 
 | 			"%s: Max frags : %d", vdev->ndev->name, | 
 | 			((struct __vxge_hw_device  *)(vdev->devh))-> | 
 | 				config.vp_config[i].fifo.max_frags); | 
 | 		break; | 
 | 	} | 
 | } | 
 |  | 
 | #ifdef CONFIG_PM | 
 | /** | 
 |  * vxge_pm_suspend - vxge power management suspend entry point | 
 |  * | 
 |  */ | 
 | static int vxge_pm_suspend(struct pci_dev *pdev, pm_message_t state) | 
 | { | 
 | 	return -ENOSYS; | 
 | } | 
 | /** | 
 |  * vxge_pm_resume - vxge power management resume entry point | 
 |  * | 
 |  */ | 
 | static int vxge_pm_resume(struct pci_dev *pdev) | 
 | { | 
 | 	return -ENOSYS; | 
 | } | 
 |  | 
 | #endif | 
 |  | 
 | /** | 
 |  * vxge_io_error_detected - called when PCI error is detected | 
 |  * @pdev: Pointer to PCI device | 
 |  * @state: The current pci connection state | 
 |  * | 
 |  * This function is called after a PCI bus error affecting | 
 |  * this device has been detected. | 
 |  */ | 
 | static pci_ers_result_t vxge_io_error_detected(struct pci_dev *pdev, | 
 | 						pci_channel_state_t state) | 
 | { | 
 | 	struct __vxge_hw_device  *hldev = | 
 | 		(struct __vxge_hw_device  *) pci_get_drvdata(pdev); | 
 | 	struct net_device *netdev = hldev->ndev; | 
 |  | 
 | 	netif_device_detach(netdev); | 
 |  | 
 | 	if (state == pci_channel_io_perm_failure) | 
 | 		return PCI_ERS_RESULT_DISCONNECT; | 
 |  | 
 | 	if (netif_running(netdev)) { | 
 | 		/* Bring down the card, while avoiding PCI I/O */ | 
 | 		do_vxge_close(netdev, 0); | 
 | 	} | 
 |  | 
 | 	pci_disable_device(pdev); | 
 |  | 
 | 	return PCI_ERS_RESULT_NEED_RESET; | 
 | } | 
 |  | 
 | /** | 
 |  * vxge_io_slot_reset - called after the pci bus has been reset. | 
 |  * @pdev: Pointer to PCI device | 
 |  * | 
 |  * Restart the card from scratch, as if from a cold-boot. | 
 |  * At this point, the card has exprienced a hard reset, | 
 |  * followed by fixups by BIOS, and has its config space | 
 |  * set up identically to what it was at cold boot. | 
 |  */ | 
 | static pci_ers_result_t vxge_io_slot_reset(struct pci_dev *pdev) | 
 | { | 
 | 	struct __vxge_hw_device  *hldev = | 
 | 		(struct __vxge_hw_device  *) pci_get_drvdata(pdev); | 
 | 	struct net_device *netdev = hldev->ndev; | 
 |  | 
 | 	struct vxgedev *vdev = netdev_priv(netdev); | 
 |  | 
 | 	if (pci_enable_device(pdev)) { | 
 | 		printk(KERN_ERR "%s: " | 
 | 			"Cannot re-enable device after reset\n", | 
 | 			VXGE_DRIVER_NAME); | 
 | 		return PCI_ERS_RESULT_DISCONNECT; | 
 | 	} | 
 |  | 
 | 	pci_set_master(pdev); | 
 | 	vxge_reset(vdev); | 
 |  | 
 | 	return PCI_ERS_RESULT_RECOVERED; | 
 | } | 
 |  | 
 | /** | 
 |  * vxge_io_resume - called when traffic can start flowing again. | 
 |  * @pdev: Pointer to PCI device | 
 |  * | 
 |  * This callback is called when the error recovery driver tells | 
 |  * us that its OK to resume normal operation. | 
 |  */ | 
 | static void vxge_io_resume(struct pci_dev *pdev) | 
 | { | 
 | 	struct __vxge_hw_device  *hldev = | 
 | 		(struct __vxge_hw_device  *) pci_get_drvdata(pdev); | 
 | 	struct net_device *netdev = hldev->ndev; | 
 |  | 
 | 	if (netif_running(netdev)) { | 
 | 		if (vxge_open(netdev)) { | 
 | 			printk(KERN_ERR "%s: " | 
 | 				"Can't bring device back up after reset\n", | 
 | 				VXGE_DRIVER_NAME); | 
 | 			return; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	netif_device_attach(netdev); | 
 | } | 
 |  | 
 | /** | 
 |  * vxge_probe | 
 |  * @pdev : structure containing the PCI related information of the device. | 
 |  * @pre: List of PCI devices supported by the driver listed in vxge_id_table. | 
 |  * Description: | 
 |  * This function is called when a new PCI device gets detected and initializes | 
 |  * it. | 
 |  * Return value: | 
 |  * returns 0 on success and negative on failure. | 
 |  * | 
 |  */ | 
 | static int __devinit | 
 | vxge_probe(struct pci_dev *pdev, const struct pci_device_id *pre) | 
 | { | 
 | 	struct __vxge_hw_device  *hldev; | 
 | 	enum vxge_hw_status status; | 
 | 	int ret; | 
 | 	int high_dma = 0; | 
 | 	u64 vpath_mask = 0; | 
 | 	struct vxgedev *vdev; | 
 | 	struct vxge_config ll_config; | 
 | 	struct vxge_hw_device_config *device_config = NULL; | 
 | 	struct vxge_hw_device_attr attr; | 
 | 	int i, j, no_of_vpath = 0, max_vpath_supported = 0; | 
 | 	u8 *macaddr; | 
 | 	struct vxge_mac_addrs *entry; | 
 | 	static int bus = -1, device = -1; | 
 | 	u8 new_device = 0; | 
 |  | 
 | 	vxge_debug_entryexit(VXGE_TRACE, "%s:%d", __func__, __LINE__); | 
 | 	attr.pdev = pdev; | 
 |  | 
 | 	if (bus != pdev->bus->number) | 
 | 		new_device = 1; | 
 | 	if (device != PCI_SLOT(pdev->devfn)) | 
 | 		new_device = 1; | 
 |  | 
 | 	bus = pdev->bus->number; | 
 | 	device = PCI_SLOT(pdev->devfn); | 
 |  | 
 | 	if (new_device) { | 
 | 		if (driver_config->config_dev_cnt && | 
 | 		   (driver_config->config_dev_cnt != | 
 | 			driver_config->total_dev_cnt)) | 
 | 			vxge_debug_init(VXGE_ERR, | 
 | 				"%s: Configured %d of %d devices", | 
 | 				VXGE_DRIVER_NAME, | 
 | 				driver_config->config_dev_cnt, | 
 | 				driver_config->total_dev_cnt); | 
 | 		driver_config->config_dev_cnt = 0; | 
 | 		driver_config->total_dev_cnt = 0; | 
 | 		driver_config->g_no_cpus = 0; | 
 | 		driver_config->vpath_per_dev = max_config_vpath; | 
 | 	} | 
 |  | 
 | 	driver_config->total_dev_cnt++; | 
 | 	if (++driver_config->config_dev_cnt > max_config_dev) { | 
 | 		ret = 0; | 
 | 		goto _exit0; | 
 | 	} | 
 |  | 
 | 	device_config = kzalloc(sizeof(struct vxge_hw_device_config), | 
 | 		GFP_KERNEL); | 
 | 	if (!device_config) { | 
 | 		ret = -ENOMEM; | 
 | 		vxge_debug_init(VXGE_ERR, | 
 | 			"device_config : malloc failed %s %d", | 
 | 			__FILE__, __LINE__); | 
 | 		goto _exit0; | 
 | 	} | 
 |  | 
 | 	memset(&ll_config, 0, sizeof(struct vxge_config)); | 
 | 	ll_config.tx_steering_type = TX_MULTIQ_STEERING; | 
 | 	ll_config.intr_type = MSI_X; | 
 | 	ll_config.napi_weight = NEW_NAPI_WEIGHT; | 
 | 	ll_config.rth_steering = RTH_STEERING; | 
 |  | 
 | 	/* get the default configuration parameters */ | 
 | 	vxge_hw_device_config_default_get(device_config); | 
 |  | 
 | 	/* initialize configuration parameters */ | 
 | 	vxge_device_config_init(device_config, &ll_config.intr_type); | 
 |  | 
 | 	ret = pci_enable_device(pdev); | 
 | 	if (ret) { | 
 | 		vxge_debug_init(VXGE_ERR, | 
 | 			"%s : can not enable PCI device", __func__); | 
 | 		goto _exit0; | 
 | 	} | 
 |  | 
 | 	if (!pci_set_dma_mask(pdev, 0xffffffffffffffffULL)) { | 
 | 		vxge_debug_ll_config(VXGE_TRACE, | 
 | 			"%s : using 64bit DMA", __func__); | 
 |  | 
 | 		high_dma = 1; | 
 |  | 
 | 		if (pci_set_consistent_dma_mask(pdev, | 
 | 						0xffffffffffffffffULL)) { | 
 | 			vxge_debug_init(VXGE_ERR, | 
 | 				"%s : unable to obtain 64bit DMA for " | 
 | 				"consistent allocations", __func__); | 
 | 			ret = -ENOMEM; | 
 | 			goto _exit1; | 
 | 		} | 
 | 	} else if (!pci_set_dma_mask(pdev, 0xffffffffUL)) { | 
 | 		vxge_debug_ll_config(VXGE_TRACE, | 
 | 			"%s : using 32bit DMA", __func__); | 
 | 	} else { | 
 | 		ret = -ENOMEM; | 
 | 		goto _exit1; | 
 | 	} | 
 |  | 
 | 	if (pci_request_regions(pdev, VXGE_DRIVER_NAME)) { | 
 | 		vxge_debug_init(VXGE_ERR, | 
 | 			"%s : request regions failed", __func__); | 
 | 		ret = -ENODEV; | 
 | 		goto _exit1; | 
 | 	} | 
 |  | 
 | 	pci_set_master(pdev); | 
 |  | 
 | 	attr.bar0 = pci_ioremap_bar(pdev, 0); | 
 | 	if (!attr.bar0) { | 
 | 		vxge_debug_init(VXGE_ERR, | 
 | 			"%s : cannot remap io memory bar0", __func__); | 
 | 		ret = -ENODEV; | 
 | 		goto _exit2; | 
 | 	} | 
 | 	vxge_debug_ll_config(VXGE_TRACE, | 
 | 		"pci ioremap bar0: %p:0x%llx", | 
 | 		attr.bar0, | 
 | 		(unsigned long long)pci_resource_start(pdev, 0)); | 
 |  | 
 | 	status = vxge_hw_device_hw_info_get(attr.bar0, | 
 | 			&ll_config.device_hw_info); | 
 | 	if (status != VXGE_HW_OK) { | 
 | 		vxge_debug_init(VXGE_ERR, | 
 | 			"%s: Reading of hardware info failed." | 
 | 			"Please try upgrading the firmware.", VXGE_DRIVER_NAME); | 
 | 		ret = -EINVAL; | 
 | 		goto _exit3; | 
 | 	} | 
 |  | 
 | 	if (ll_config.device_hw_info.fw_version.major != | 
 | 		VXGE_DRIVER_FW_VERSION_MAJOR) { | 
 | 		vxge_debug_init(VXGE_ERR, | 
 | 			"%s: Incorrect firmware version." | 
 | 			"Please upgrade the firmware to version 1.x.x", | 
 | 			VXGE_DRIVER_NAME); | 
 | 		ret = -EINVAL; | 
 | 		goto _exit3; | 
 | 	} | 
 |  | 
 | 	vpath_mask = ll_config.device_hw_info.vpath_mask; | 
 | 	if (vpath_mask == 0) { | 
 | 		vxge_debug_ll_config(VXGE_TRACE, | 
 | 			"%s: No vpaths available in device", VXGE_DRIVER_NAME); | 
 | 		ret = -EINVAL; | 
 | 		goto _exit3; | 
 | 	} | 
 |  | 
 | 	vxge_debug_ll_config(VXGE_TRACE, | 
 | 		"%s:%d  Vpath mask = %llx", __func__, __LINE__, | 
 | 		(unsigned long long)vpath_mask); | 
 |  | 
 | 	/* Check how many vpaths are available */ | 
 | 	for (i = 0; i < VXGE_HW_MAX_VIRTUAL_PATHS; i++) { | 
 | 		if (!((vpath_mask) & vxge_mBIT(i))) | 
 | 			continue; | 
 | 		max_vpath_supported++; | 
 | 	} | 
 |  | 
 | 	/* Enable SRIOV mode, if firmware has SRIOV support and if it is a PF */ | 
 | 	if ((VXGE_HW_FUNCTION_MODE_SRIOV == | 
 | 		ll_config.device_hw_info.function_mode) && | 
 | 		(max_config_dev > 1) && (pdev->is_physfn)) { | 
 | 			ret = pci_enable_sriov(pdev, max_config_dev - 1); | 
 | 			if (ret) | 
 | 				vxge_debug_ll_config(VXGE_ERR, | 
 | 					"Failed to enable SRIOV: %d \n", ret); | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * Configure vpaths and get driver configured number of vpaths | 
 | 	 * which is less than or equal to the maximum vpaths per function. | 
 | 	 */ | 
 | 	no_of_vpath = vxge_config_vpaths(device_config, vpath_mask, &ll_config); | 
 | 	if (!no_of_vpath) { | 
 | 		vxge_debug_ll_config(VXGE_ERR, | 
 | 			"%s: No more vpaths to configure", VXGE_DRIVER_NAME); | 
 | 		ret = 0; | 
 | 		goto _exit3; | 
 | 	} | 
 |  | 
 | 	/* Setting driver callbacks */ | 
 | 	attr.uld_callbacks.link_up = vxge_callback_link_up; | 
 | 	attr.uld_callbacks.link_down = vxge_callback_link_down; | 
 | 	attr.uld_callbacks.crit_err = vxge_callback_crit_err; | 
 |  | 
 | 	status = vxge_hw_device_initialize(&hldev, &attr, device_config); | 
 | 	if (status != VXGE_HW_OK) { | 
 | 		vxge_debug_init(VXGE_ERR, | 
 | 			"Failed to initialize device (%d)", status); | 
 | 			ret = -EINVAL; | 
 | 			goto _exit3; | 
 | 	} | 
 |  | 
 | 	vxge_hw_device_debug_set(hldev, VXGE_ERR, VXGE_COMPONENT_LL); | 
 |  | 
 | 	/* set private device info */ | 
 | 	pci_set_drvdata(pdev, hldev); | 
 |  | 
 | 	ll_config.gro_enable = VXGE_GRO_ALWAYS_AGGREGATE; | 
 | 	ll_config.fifo_indicate_max_pkts = VXGE_FIFO_INDICATE_MAX_PKTS; | 
 | 	ll_config.addr_learn_en = addr_learn_en; | 
 | 	ll_config.rth_algorithm = RTH_ALG_JENKINS; | 
 | 	ll_config.rth_hash_type_tcpipv4 = VXGE_HW_RING_HASH_TYPE_TCP_IPV4; | 
 | 	ll_config.rth_hash_type_ipv4 = VXGE_HW_RING_HASH_TYPE_NONE; | 
 | 	ll_config.rth_hash_type_tcpipv6 = VXGE_HW_RING_HASH_TYPE_NONE; | 
 | 	ll_config.rth_hash_type_ipv6 = VXGE_HW_RING_HASH_TYPE_NONE; | 
 | 	ll_config.rth_hash_type_tcpipv6ex = VXGE_HW_RING_HASH_TYPE_NONE; | 
 | 	ll_config.rth_hash_type_ipv6ex = VXGE_HW_RING_HASH_TYPE_NONE; | 
 | 	ll_config.rth_bkt_sz = RTH_BUCKET_SIZE; | 
 | 	ll_config.tx_pause_enable = VXGE_PAUSE_CTRL_ENABLE; | 
 | 	ll_config.rx_pause_enable = VXGE_PAUSE_CTRL_ENABLE; | 
 |  | 
 | 	if (vxge_device_register(hldev, &ll_config, high_dma, no_of_vpath, | 
 | 		&vdev)) { | 
 | 		ret = -EINVAL; | 
 | 		goto _exit4; | 
 | 	} | 
 |  | 
 | 	vxge_hw_device_debug_set(hldev, VXGE_TRACE, VXGE_COMPONENT_LL); | 
 | 	VXGE_COPY_DEBUG_INFO_TO_LL(vdev, vxge_hw_device_error_level_get(hldev), | 
 | 		vxge_hw_device_trace_level_get(hldev)); | 
 |  | 
 | 	/* set private HW device info */ | 
 | 	hldev->ndev = vdev->ndev; | 
 | 	vdev->mtu = VXGE_HW_DEFAULT_MTU; | 
 | 	vdev->bar0 = attr.bar0; | 
 | 	vdev->max_vpath_supported = max_vpath_supported; | 
 | 	vdev->no_of_vpath = no_of_vpath; | 
 |  | 
 | 	/* Virtual Path count */ | 
 | 	for (i = 0, j = 0; i < VXGE_HW_MAX_VIRTUAL_PATHS; i++) { | 
 | 		if (!vxge_bVALn(vpath_mask, i, 1)) | 
 | 			continue; | 
 | 		if (j >= vdev->no_of_vpath) | 
 | 			break; | 
 |  | 
 | 		vdev->vpaths[j].is_configured = 1; | 
 | 		vdev->vpaths[j].device_id = i; | 
 | 		vdev->vpaths[j].fifo.driver_id = j; | 
 | 		vdev->vpaths[j].ring.driver_id = j; | 
 | 		vdev->vpaths[j].vdev = vdev; | 
 | 		vdev->vpaths[j].max_mac_addr_cnt = max_mac_vpath; | 
 | 		memcpy((u8 *)vdev->vpaths[j].macaddr, | 
 | 				(u8 *)ll_config.device_hw_info.mac_addrs[i], | 
 | 				ETH_ALEN); | 
 |  | 
 | 		/* Initialize the mac address list header */ | 
 | 		INIT_LIST_HEAD(&vdev->vpaths[j].mac_addr_list); | 
 |  | 
 | 		vdev->vpaths[j].mac_addr_cnt = 0; | 
 | 		vdev->vpaths[j].mcast_addr_cnt = 0; | 
 | 		j++; | 
 | 	} | 
 | 	vdev->exec_mode = VXGE_EXEC_MODE_DISABLE; | 
 | 	vdev->max_config_port = max_config_port; | 
 |  | 
 | 	vdev->vlan_tag_strip = vlan_tag_strip; | 
 |  | 
 | 	/* map the hashing selector table to the configured vpaths */ | 
 | 	for (i = 0; i < vdev->no_of_vpath; i++) | 
 | 		vdev->vpath_selector[i] = vpath_selector[i]; | 
 |  | 
 | 	macaddr = (u8 *)vdev->vpaths[0].macaddr; | 
 |  | 
 | 	ll_config.device_hw_info.serial_number[VXGE_HW_INFO_LEN - 1] = '\0'; | 
 | 	ll_config.device_hw_info.product_desc[VXGE_HW_INFO_LEN - 1] = '\0'; | 
 | 	ll_config.device_hw_info.part_number[VXGE_HW_INFO_LEN - 1] = '\0'; | 
 |  | 
 | 	vxge_debug_init(VXGE_TRACE, "%s: SERIAL NUMBER: %s", | 
 | 		vdev->ndev->name, ll_config.device_hw_info.serial_number); | 
 |  | 
 | 	vxge_debug_init(VXGE_TRACE, "%s: PART NUMBER: %s", | 
 | 		vdev->ndev->name, ll_config.device_hw_info.part_number); | 
 |  | 
 | 	vxge_debug_init(VXGE_TRACE, "%s: Neterion %s Server Adapter", | 
 | 		vdev->ndev->name, ll_config.device_hw_info.product_desc); | 
 |  | 
 | 	vxge_debug_init(VXGE_TRACE, | 
 | 		"%s: MAC ADDR: %02X:%02X:%02X:%02X:%02X:%02X", | 
 | 		vdev->ndev->name, macaddr[0], macaddr[1], macaddr[2], | 
 | 		macaddr[3], macaddr[4], macaddr[5]); | 
 |  | 
 | 	vxge_debug_init(VXGE_TRACE, "%s: Link Width x%d", | 
 | 		vdev->ndev->name, vxge_hw_device_link_width_get(hldev)); | 
 |  | 
 | 	vxge_debug_init(VXGE_TRACE, | 
 | 		"%s: Firmware version : %s Date : %s", vdev->ndev->name, | 
 | 		ll_config.device_hw_info.fw_version.version, | 
 | 		ll_config.device_hw_info.fw_date.date); | 
 |  | 
 | 	if (new_device) { | 
 | 		switch (ll_config.device_hw_info.function_mode) { | 
 | 		case VXGE_HW_FUNCTION_MODE_SINGLE_FUNCTION: | 
 | 			vxge_debug_init(VXGE_TRACE, | 
 | 			"%s: Single Function Mode Enabled", vdev->ndev->name); | 
 | 		break; | 
 | 		case VXGE_HW_FUNCTION_MODE_MULTI_FUNCTION: | 
 | 			vxge_debug_init(VXGE_TRACE, | 
 | 			"%s: Multi Function Mode Enabled", vdev->ndev->name); | 
 | 		break; | 
 | 		case VXGE_HW_FUNCTION_MODE_SRIOV: | 
 | 			vxge_debug_init(VXGE_TRACE, | 
 | 			"%s: Single Root IOV Mode Enabled", vdev->ndev->name); | 
 | 		break; | 
 | 		case VXGE_HW_FUNCTION_MODE_MRIOV: | 
 | 			vxge_debug_init(VXGE_TRACE, | 
 | 			"%s: Multi Root IOV Mode Enabled", vdev->ndev->name); | 
 | 		break; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	vxge_print_parm(vdev, vpath_mask); | 
 |  | 
 | 	/* Store the fw version for ethttool option */ | 
 | 	strcpy(vdev->fw_version, ll_config.device_hw_info.fw_version.version); | 
 | 	memcpy(vdev->ndev->dev_addr, (u8 *)vdev->vpaths[0].macaddr, ETH_ALEN); | 
 | 	memcpy(vdev->ndev->perm_addr, vdev->ndev->dev_addr, ETH_ALEN); | 
 |  | 
 | 	/* Copy the station mac address to the list */ | 
 | 	for (i = 0; i < vdev->no_of_vpath; i++) { | 
 | 		entry =	(struct vxge_mac_addrs *) | 
 | 				kzalloc(sizeof(struct vxge_mac_addrs), | 
 | 					GFP_KERNEL); | 
 | 		if (NULL == entry) { | 
 | 			vxge_debug_init(VXGE_ERR, | 
 | 				"%s: mac_addr_list : memory allocation failed", | 
 | 				vdev->ndev->name); | 
 | 			ret = -EPERM; | 
 | 			goto _exit5; | 
 | 		} | 
 | 		macaddr = (u8 *)&entry->macaddr; | 
 | 		memcpy(macaddr, vdev->ndev->dev_addr, ETH_ALEN); | 
 | 		list_add(&entry->item, &vdev->vpaths[i].mac_addr_list); | 
 | 		vdev->vpaths[i].mac_addr_cnt = 1; | 
 | 	} | 
 |  | 
 | 	kfree(device_config); | 
 | 	vxge_debug_entryexit(VXGE_TRACE, "%s: %s:%d  Exiting...", | 
 | 		vdev->ndev->name, __func__, __LINE__); | 
 |  | 
 | 	vxge_hw_device_debug_set(hldev, VXGE_ERR, VXGE_COMPONENT_LL); | 
 | 	VXGE_COPY_DEBUG_INFO_TO_LL(vdev, vxge_hw_device_error_level_get(hldev), | 
 | 		vxge_hw_device_trace_level_get(hldev)); | 
 |  | 
 | 	return 0; | 
 |  | 
 | _exit5: | 
 | 	for (i = 0; i < vdev->no_of_vpath; i++) | 
 | 		vxge_free_mac_add_list(&vdev->vpaths[i]); | 
 |  | 
 | 	vxge_device_unregister(hldev); | 
 | _exit4: | 
 | 	pci_disable_sriov(pdev); | 
 | 	vxge_hw_device_terminate(hldev); | 
 | _exit3: | 
 | 	iounmap(attr.bar0); | 
 | _exit2: | 
 | 	pci_release_regions(pdev); | 
 | _exit1: | 
 | 	pci_disable_device(pdev); | 
 | _exit0: | 
 | 	kfree(device_config); | 
 | 	driver_config->config_dev_cnt--; | 
 | 	pci_set_drvdata(pdev, NULL); | 
 | 	return ret; | 
 | } | 
 |  | 
 | /** | 
 |  * vxge_rem_nic - Free the PCI device | 
 |  * @pdev: structure containing the PCI related information of the device. | 
 |  * Description: This function is called by the Pci subsystem to release a | 
 |  * PCI device and free up all resource held up by the device. | 
 |  */ | 
 | static void __devexit | 
 | vxge_remove(struct pci_dev *pdev) | 
 | { | 
 | 	struct __vxge_hw_device  *hldev; | 
 | 	struct vxgedev *vdev = NULL; | 
 | 	struct net_device *dev; | 
 | 	int i = 0; | 
 | #if ((VXGE_DEBUG_INIT & VXGE_DEBUG_MASK) || \ | 
 | 	(VXGE_DEBUG_ENTRYEXIT & VXGE_DEBUG_MASK)) | 
 | 	u32 level_trace; | 
 | #endif | 
 |  | 
 | 	hldev = (struct __vxge_hw_device  *) pci_get_drvdata(pdev); | 
 |  | 
 | 	if (hldev == NULL) | 
 | 		return; | 
 | 	dev = hldev->ndev; | 
 | 	vdev = netdev_priv(dev); | 
 |  | 
 | #if ((VXGE_DEBUG_INIT & VXGE_DEBUG_MASK) || \ | 
 | 	(VXGE_DEBUG_ENTRYEXIT & VXGE_DEBUG_MASK)) | 
 | 	level_trace = vdev->level_trace; | 
 | #endif | 
 | 	vxge_debug_entryexit(level_trace, | 
 | 		"%s:%d", __func__, __LINE__); | 
 |  | 
 | 	vxge_debug_init(level_trace, | 
 | 		"%s : removing PCI device...", __func__); | 
 | 	vxge_device_unregister(hldev); | 
 |  | 
 | 	for (i = 0; i < vdev->no_of_vpath; i++) { | 
 | 		vxge_free_mac_add_list(&vdev->vpaths[i]); | 
 | 		vdev->vpaths[i].mcast_addr_cnt = 0; | 
 | 		vdev->vpaths[i].mac_addr_cnt = 0; | 
 | 	} | 
 |  | 
 | 	kfree(vdev->vpaths); | 
 |  | 
 | 	iounmap(vdev->bar0); | 
 |  | 
 | 	pci_disable_sriov(pdev); | 
 |  | 
 | 	/* we are safe to free it now */ | 
 | 	free_netdev(dev); | 
 |  | 
 | 	vxge_debug_init(level_trace, | 
 | 		"%s:%d  Device unregistered", __func__, __LINE__); | 
 |  | 
 | 	vxge_hw_device_terminate(hldev); | 
 |  | 
 | 	pci_disable_device(pdev); | 
 | 	pci_release_regions(pdev); | 
 | 	pci_set_drvdata(pdev, NULL); | 
 | 	vxge_debug_entryexit(level_trace, | 
 | 		"%s:%d  Exiting...", __func__, __LINE__); | 
 | } | 
 |  | 
 | static struct pci_error_handlers vxge_err_handler = { | 
 | 	.error_detected = vxge_io_error_detected, | 
 | 	.slot_reset = vxge_io_slot_reset, | 
 | 	.resume = vxge_io_resume, | 
 | }; | 
 |  | 
 | static struct pci_driver vxge_driver = { | 
 | 	.name = VXGE_DRIVER_NAME, | 
 | 	.id_table = vxge_id_table, | 
 | 	.probe = vxge_probe, | 
 | 	.remove = __devexit_p(vxge_remove), | 
 | #ifdef CONFIG_PM | 
 | 	.suspend = vxge_pm_suspend, | 
 | 	.resume = vxge_pm_resume, | 
 | #endif | 
 | 	.err_handler = &vxge_err_handler, | 
 | }; | 
 |  | 
 | static int __init | 
 | vxge_starter(void) | 
 | { | 
 | 	int ret = 0; | 
 | 	char version[32]; | 
 | 	snprintf(version, 32, "%s", DRV_VERSION); | 
 |  | 
 | 	printk(KERN_CRIT "%s: Copyright(c) 2002-2009 Neterion Inc\n", | 
 | 		VXGE_DRIVER_NAME); | 
 | 	printk(KERN_CRIT "%s: Driver version: %s\n", | 
 | 			VXGE_DRIVER_NAME, version); | 
 |  | 
 | 	verify_bandwidth(); | 
 |  | 
 | 	driver_config = kzalloc(sizeof(struct vxge_drv_config), GFP_KERNEL); | 
 | 	if (!driver_config) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	ret = pci_register_driver(&vxge_driver); | 
 |  | 
 | 	if (driver_config->config_dev_cnt && | 
 | 	   (driver_config->config_dev_cnt != driver_config->total_dev_cnt)) | 
 | 		vxge_debug_init(VXGE_ERR, | 
 | 			"%s: Configured %d of %d devices", | 
 | 			VXGE_DRIVER_NAME, driver_config->config_dev_cnt, | 
 | 			driver_config->total_dev_cnt); | 
 |  | 
 | 	if (ret) | 
 | 		kfree(driver_config); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static void __exit | 
 | vxge_closer(void) | 
 | { | 
 | 	pci_unregister_driver(&vxge_driver); | 
 | 	kfree(driver_config); | 
 | } | 
 | module_init(vxge_starter); | 
 | module_exit(vxge_closer); |