| /* | 
 |  * IEEE 802.11 defines | 
 |  * | 
 |  * Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen | 
 |  * <jkmaline@cc.hut.fi> | 
 |  * Copyright (c) 2002-2003, Jouni Malinen <jkmaline@cc.hut.fi> | 
 |  * Copyright (c) 2005, Devicescape Software, Inc. | 
 |  * Copyright (c) 2006, Michael Wu <flamingice@sourmilk.net> | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or modify | 
 |  * it under the terms of the GNU General Public License version 2 as | 
 |  * published by the Free Software Foundation. | 
 |  */ | 
 |  | 
 | #ifndef IEEE80211_H | 
 | #define IEEE80211_H | 
 |  | 
 | #include <linux/types.h> | 
 | #include <asm/byteorder.h> | 
 |  | 
 | #define FCS_LEN 4 | 
 |  | 
 | #define IEEE80211_FCTL_VERS		0x0003 | 
 | #define IEEE80211_FCTL_FTYPE		0x000c | 
 | #define IEEE80211_FCTL_STYPE		0x00f0 | 
 | #define IEEE80211_FCTL_TODS		0x0100 | 
 | #define IEEE80211_FCTL_FROMDS		0x0200 | 
 | #define IEEE80211_FCTL_MOREFRAGS	0x0400 | 
 | #define IEEE80211_FCTL_RETRY		0x0800 | 
 | #define IEEE80211_FCTL_PM		0x1000 | 
 | #define IEEE80211_FCTL_MOREDATA		0x2000 | 
 | #define IEEE80211_FCTL_PROTECTED	0x4000 | 
 | #define IEEE80211_FCTL_ORDER		0x8000 | 
 |  | 
 | #define IEEE80211_SCTL_FRAG		0x000F | 
 | #define IEEE80211_SCTL_SEQ		0xFFF0 | 
 |  | 
 | #define IEEE80211_FTYPE_MGMT		0x0000 | 
 | #define IEEE80211_FTYPE_CTL		0x0004 | 
 | #define IEEE80211_FTYPE_DATA		0x0008 | 
 |  | 
 | /* management */ | 
 | #define IEEE80211_STYPE_ASSOC_REQ	0x0000 | 
 | #define IEEE80211_STYPE_ASSOC_RESP	0x0010 | 
 | #define IEEE80211_STYPE_REASSOC_REQ	0x0020 | 
 | #define IEEE80211_STYPE_REASSOC_RESP	0x0030 | 
 | #define IEEE80211_STYPE_PROBE_REQ	0x0040 | 
 | #define IEEE80211_STYPE_PROBE_RESP	0x0050 | 
 | #define IEEE80211_STYPE_BEACON		0x0080 | 
 | #define IEEE80211_STYPE_ATIM		0x0090 | 
 | #define IEEE80211_STYPE_DISASSOC	0x00A0 | 
 | #define IEEE80211_STYPE_AUTH		0x00B0 | 
 | #define IEEE80211_STYPE_DEAUTH		0x00C0 | 
 | #define IEEE80211_STYPE_ACTION		0x00D0 | 
 |  | 
 | /* control */ | 
 | #define IEEE80211_STYPE_BACK_REQ	0x0080 | 
 | #define IEEE80211_STYPE_BACK		0x0090 | 
 | #define IEEE80211_STYPE_PSPOLL		0x00A0 | 
 | #define IEEE80211_STYPE_RTS		0x00B0 | 
 | #define IEEE80211_STYPE_CTS		0x00C0 | 
 | #define IEEE80211_STYPE_ACK		0x00D0 | 
 | #define IEEE80211_STYPE_CFEND		0x00E0 | 
 | #define IEEE80211_STYPE_CFENDACK	0x00F0 | 
 |  | 
 | /* data */ | 
 | #define IEEE80211_STYPE_DATA			0x0000 | 
 | #define IEEE80211_STYPE_DATA_CFACK		0x0010 | 
 | #define IEEE80211_STYPE_DATA_CFPOLL		0x0020 | 
 | #define IEEE80211_STYPE_DATA_CFACKPOLL		0x0030 | 
 | #define IEEE80211_STYPE_NULLFUNC		0x0040 | 
 | #define IEEE80211_STYPE_CFACK			0x0050 | 
 | #define IEEE80211_STYPE_CFPOLL			0x0060 | 
 | #define IEEE80211_STYPE_CFACKPOLL		0x0070 | 
 | #define IEEE80211_STYPE_QOS_DATA		0x0080 | 
 | #define IEEE80211_STYPE_QOS_DATA_CFACK		0x0090 | 
 | #define IEEE80211_STYPE_QOS_DATA_CFPOLL		0x00A0 | 
 | #define IEEE80211_STYPE_QOS_DATA_CFACKPOLL	0x00B0 | 
 | #define IEEE80211_STYPE_QOS_NULLFUNC		0x00C0 | 
 | #define IEEE80211_STYPE_QOS_CFACK		0x00D0 | 
 | #define IEEE80211_STYPE_QOS_CFPOLL		0x00E0 | 
 | #define IEEE80211_STYPE_QOS_CFACKPOLL		0x00F0 | 
 |  | 
 |  | 
 | /* miscellaneous IEEE 802.11 constants */ | 
 | #define IEEE80211_MAX_FRAG_THRESHOLD	2352 | 
 | #define IEEE80211_MAX_RTS_THRESHOLD	2353 | 
 | #define IEEE80211_MAX_AID		2007 | 
 | #define IEEE80211_MAX_TIM_LEN		251 | 
 | /* Maximum size for the MA-UNITDATA primitive, 802.11 standard section | 
 |    6.2.1.1.2. | 
 |  | 
 |    802.11e clarifies the figure in section 7.1.2. The frame body is | 
 |    up to 2304 octets long (maximum MSDU size) plus any crypt overhead. */ | 
 | #define IEEE80211_MAX_DATA_LEN		2304 | 
 | /* 30 byte 4 addr hdr, 2 byte QoS, 2304 byte MSDU, 12 byte crypt, 4 byte FCS */ | 
 | #define IEEE80211_MAX_FRAME_LEN		2352 | 
 |  | 
 | #define IEEE80211_MAX_SSID_LEN		32 | 
 | #define IEEE80211_MAX_MESH_ID_LEN	32 | 
 |  | 
 | struct ieee80211_hdr { | 
 | 	__le16 frame_control; | 
 | 	__le16 duration_id; | 
 | 	u8 addr1[6]; | 
 | 	u8 addr2[6]; | 
 | 	u8 addr3[6]; | 
 | 	__le16 seq_ctrl; | 
 | 	u8 addr4[6]; | 
 | } __attribute__ ((packed)); | 
 |  | 
 |  | 
 | struct ieee80211s_hdr { | 
 | 	u8 flags; | 
 | 	u8 ttl; | 
 | 	__le32 seqnum; | 
 | 	u8 eaddr1[6]; | 
 | 	u8 eaddr2[6]; | 
 | 	u8 eaddr3[6]; | 
 | } __attribute__ ((packed)); | 
 |  | 
 |  | 
 | struct ieee80211_mgmt { | 
 | 	__le16 frame_control; | 
 | 	__le16 duration; | 
 | 	u8 da[6]; | 
 | 	u8 sa[6]; | 
 | 	u8 bssid[6]; | 
 | 	__le16 seq_ctrl; | 
 | 	union { | 
 | 		struct { | 
 | 			__le16 auth_alg; | 
 | 			__le16 auth_transaction; | 
 | 			__le16 status_code; | 
 | 			/* possibly followed by Challenge text */ | 
 | 			u8 variable[0]; | 
 | 		} __attribute__ ((packed)) auth; | 
 | 		struct { | 
 | 			__le16 reason_code; | 
 | 		} __attribute__ ((packed)) deauth; | 
 | 		struct { | 
 | 			__le16 capab_info; | 
 | 			__le16 listen_interval; | 
 | 			/* followed by SSID and Supported rates */ | 
 | 			u8 variable[0]; | 
 | 		} __attribute__ ((packed)) assoc_req; | 
 | 		struct { | 
 | 			__le16 capab_info; | 
 | 			__le16 status_code; | 
 | 			__le16 aid; | 
 | 			/* followed by Supported rates */ | 
 | 			u8 variable[0]; | 
 | 		} __attribute__ ((packed)) assoc_resp, reassoc_resp; | 
 | 		struct { | 
 | 			__le16 capab_info; | 
 | 			__le16 listen_interval; | 
 | 			u8 current_ap[6]; | 
 | 			/* followed by SSID and Supported rates */ | 
 | 			u8 variable[0]; | 
 | 		} __attribute__ ((packed)) reassoc_req; | 
 | 		struct { | 
 | 			__le16 reason_code; | 
 | 		} __attribute__ ((packed)) disassoc; | 
 | 		struct { | 
 | 			__le64 timestamp; | 
 | 			__le16 beacon_int; | 
 | 			__le16 capab_info; | 
 | 			/* followed by some of SSID, Supported rates, | 
 | 			 * FH Params, DS Params, CF Params, IBSS Params, TIM */ | 
 | 			u8 variable[0]; | 
 | 		} __attribute__ ((packed)) beacon; | 
 | 		struct { | 
 | 			/* only variable items: SSID, Supported rates */ | 
 | 			u8 variable[0]; | 
 | 		} __attribute__ ((packed)) probe_req; | 
 | 		struct { | 
 | 			__le64 timestamp; | 
 | 			__le16 beacon_int; | 
 | 			__le16 capab_info; | 
 | 			/* followed by some of SSID, Supported rates, | 
 | 			 * FH Params, DS Params, CF Params, IBSS Params */ | 
 | 			u8 variable[0]; | 
 | 		} __attribute__ ((packed)) probe_resp; | 
 | 		struct { | 
 | 			u8 category; | 
 | 			union { | 
 | 				struct { | 
 | 					u8 action_code; | 
 | 					u8 dialog_token; | 
 | 					u8 status_code; | 
 | 					u8 variable[0]; | 
 | 				} __attribute__ ((packed)) wme_action; | 
 | 				struct{ | 
 | 					u8 action_code; | 
 | 					u8 element_id; | 
 | 					u8 length; | 
 | 					u8 switch_mode; | 
 | 					u8 new_chan; | 
 | 					u8 switch_count; | 
 | 				} __attribute__((packed)) chan_switch; | 
 | 				struct{ | 
 | 					u8 action_code; | 
 | 					u8 dialog_token; | 
 | 					__le16 capab; | 
 | 					__le16 timeout; | 
 | 					__le16 start_seq_num; | 
 | 				} __attribute__((packed)) addba_req; | 
 | 				struct{ | 
 | 					u8 action_code; | 
 | 					u8 dialog_token; | 
 | 					__le16 status; | 
 | 					__le16 capab; | 
 | 					__le16 timeout; | 
 | 				} __attribute__((packed)) addba_resp; | 
 | 				struct{ | 
 | 					u8 action_code; | 
 | 					__le16 params; | 
 | 					__le16 reason_code; | 
 | 				} __attribute__((packed)) delba; | 
 | 				struct{ | 
 | 					u8 action_code; | 
 | 					/* capab_info for open and confirm, | 
 | 					 * reason for close | 
 | 					 */ | 
 | 					__le16 aux; | 
 | 					/* Followed in plink_confirm by status | 
 | 					 * code, AID and supported rates, | 
 | 					 * and directly by supported rates in | 
 | 					 * plink_open and plink_close | 
 | 					 */ | 
 | 					u8 variable[0]; | 
 | 				} __attribute__((packed)) plink_action; | 
 | 				struct{ | 
 | 					u8 action_code; | 
 | 					u8 variable[0]; | 
 | 				} __attribute__((packed)) mesh_action; | 
 | 			} u; | 
 | 		} __attribute__ ((packed)) action; | 
 | 	} u; | 
 | } __attribute__ ((packed)); | 
 |  | 
 |  | 
 | /* Control frames */ | 
 | struct ieee80211_rts { | 
 | 	__le16 frame_control; | 
 | 	__le16 duration; | 
 | 	u8 ra[6]; | 
 | 	u8 ta[6]; | 
 | } __attribute__ ((packed)); | 
 |  | 
 | struct ieee80211_cts { | 
 | 	__le16 frame_control; | 
 | 	__le16 duration; | 
 | 	u8 ra[6]; | 
 | } __attribute__ ((packed)); | 
 |  | 
 | /** | 
 |  * struct ieee80211_bar - HT Block Ack Request | 
 |  * | 
 |  * This structure refers to "HT BlockAckReq" as | 
 |  * described in 802.11n draft section 7.2.1.7.1 | 
 |  */ | 
 | struct ieee80211_bar { | 
 | 	__le16 frame_control; | 
 | 	__le16 duration; | 
 | 	__u8 ra[6]; | 
 | 	__u8 ta[6]; | 
 | 	__le16 control; | 
 | 	__le16 start_seq_num; | 
 | } __attribute__((packed)); | 
 |  | 
 | /** | 
 |  * struct ieee80211_ht_cap - HT capabilities | 
 |  * | 
 |  * This structure refers to "HT capabilities element" as | 
 |  * described in 802.11n draft section 7.3.2.52 | 
 |  */ | 
 | struct ieee80211_ht_cap { | 
 | 	__le16 cap_info; | 
 | 	u8 ampdu_params_info; | 
 | 	u8 supp_mcs_set[16]; | 
 | 	__le16 extended_ht_cap_info; | 
 | 	__le32 tx_BF_cap_info; | 
 | 	u8 antenna_selection_info; | 
 | } __attribute__ ((packed)); | 
 |  | 
 | /** | 
 |  * struct ieee80211_ht_cap - HT additional information | 
 |  * | 
 |  * This structure refers to "HT information element" as | 
 |  * described in 802.11n draft section 7.3.2.53 | 
 |  */ | 
 | struct ieee80211_ht_addt_info { | 
 | 	u8 control_chan; | 
 | 	u8 ht_param; | 
 | 	__le16 operation_mode; | 
 | 	__le16 stbc_param; | 
 | 	u8 basic_set[16]; | 
 | } __attribute__ ((packed)); | 
 |  | 
 | /* 802.11n HT capabilities masks */ | 
 | #define IEEE80211_HT_CAP_SUP_WIDTH		0x0002 | 
 | #define IEEE80211_HT_CAP_MIMO_PS		0x000C | 
 | #define IEEE80211_HT_CAP_GRN_FLD		0x0010 | 
 | #define IEEE80211_HT_CAP_SGI_20			0x0020 | 
 | #define IEEE80211_HT_CAP_SGI_40			0x0040 | 
 | #define IEEE80211_HT_CAP_DELAY_BA		0x0400 | 
 | #define IEEE80211_HT_CAP_MAX_AMSDU		0x0800 | 
 | #define IEEE80211_HT_CAP_AMPDU_FACTOR		0x03 | 
 | #define IEEE80211_HT_CAP_AMPDU_DENSITY		0x1C | 
 | /* 802.11n HT IE masks */ | 
 | #define IEEE80211_HT_IE_CHA_SEC_OFFSET		0x03 | 
 | #define IEEE80211_HT_IE_CHA_WIDTH		0x04 | 
 | #define IEEE80211_HT_IE_HT_PROTECTION		0x0003 | 
 | #define IEEE80211_HT_IE_NON_GF_STA_PRSNT	0x0004 | 
 | #define IEEE80211_HT_IE_NON_HT_STA_PRSNT	0x0010 | 
 |  | 
 | /* MIMO Power Save Modes */ | 
 | #define WLAN_HT_CAP_MIMO_PS_STATIC         0 | 
 | #define WLAN_HT_CAP_MIMO_PS_DYNAMIC        1 | 
 | #define WLAN_HT_CAP_MIMO_PS_INVALID        2 | 
 | #define WLAN_HT_CAP_MIMO_PS_DISABLED       3 | 
 |  | 
 | /* Authentication algorithms */ | 
 | #define WLAN_AUTH_OPEN 0 | 
 | #define WLAN_AUTH_SHARED_KEY 1 | 
 | #define WLAN_AUTH_FAST_BSS_TRANSITION 2 | 
 | #define WLAN_AUTH_LEAP 128 | 
 |  | 
 | #define WLAN_AUTH_CHALLENGE_LEN 128 | 
 |  | 
 | #define WLAN_CAPABILITY_ESS		(1<<0) | 
 | #define WLAN_CAPABILITY_IBSS		(1<<1) | 
 | #define WLAN_CAPABILITY_CF_POLLABLE	(1<<2) | 
 | #define WLAN_CAPABILITY_CF_POLL_REQUEST	(1<<3) | 
 | #define WLAN_CAPABILITY_PRIVACY		(1<<4) | 
 | #define WLAN_CAPABILITY_SHORT_PREAMBLE	(1<<5) | 
 | #define WLAN_CAPABILITY_PBCC		(1<<6) | 
 | #define WLAN_CAPABILITY_CHANNEL_AGILITY	(1<<7) | 
 | /* 802.11h */ | 
 | #define WLAN_CAPABILITY_SPECTRUM_MGMT	(1<<8) | 
 | #define WLAN_CAPABILITY_QOS		(1<<9) | 
 | #define WLAN_CAPABILITY_SHORT_SLOT_TIME	(1<<10) | 
 | #define WLAN_CAPABILITY_DSSS_OFDM	(1<<13) | 
 |  | 
 | /* 802.11g ERP information element */ | 
 | #define WLAN_ERP_NON_ERP_PRESENT (1<<0) | 
 | #define WLAN_ERP_USE_PROTECTION (1<<1) | 
 | #define WLAN_ERP_BARKER_PREAMBLE (1<<2) | 
 |  | 
 | /* WLAN_ERP_BARKER_PREAMBLE values */ | 
 | enum { | 
 | 	WLAN_ERP_PREAMBLE_SHORT = 0, | 
 | 	WLAN_ERP_PREAMBLE_LONG = 1, | 
 | }; | 
 |  | 
 | /* Status codes */ | 
 | enum ieee80211_statuscode { | 
 | 	WLAN_STATUS_SUCCESS = 0, | 
 | 	WLAN_STATUS_UNSPECIFIED_FAILURE = 1, | 
 | 	WLAN_STATUS_CAPS_UNSUPPORTED = 10, | 
 | 	WLAN_STATUS_REASSOC_NO_ASSOC = 11, | 
 | 	WLAN_STATUS_ASSOC_DENIED_UNSPEC = 12, | 
 | 	WLAN_STATUS_NOT_SUPPORTED_AUTH_ALG = 13, | 
 | 	WLAN_STATUS_UNKNOWN_AUTH_TRANSACTION = 14, | 
 | 	WLAN_STATUS_CHALLENGE_FAIL = 15, | 
 | 	WLAN_STATUS_AUTH_TIMEOUT = 16, | 
 | 	WLAN_STATUS_AP_UNABLE_TO_HANDLE_NEW_STA = 17, | 
 | 	WLAN_STATUS_ASSOC_DENIED_RATES = 18, | 
 | 	/* 802.11b */ | 
 | 	WLAN_STATUS_ASSOC_DENIED_NOSHORTPREAMBLE = 19, | 
 | 	WLAN_STATUS_ASSOC_DENIED_NOPBCC = 20, | 
 | 	WLAN_STATUS_ASSOC_DENIED_NOAGILITY = 21, | 
 | 	/* 802.11h */ | 
 | 	WLAN_STATUS_ASSOC_DENIED_NOSPECTRUM = 22, | 
 | 	WLAN_STATUS_ASSOC_REJECTED_BAD_POWER = 23, | 
 | 	WLAN_STATUS_ASSOC_REJECTED_BAD_SUPP_CHAN = 24, | 
 | 	/* 802.11g */ | 
 | 	WLAN_STATUS_ASSOC_DENIED_NOSHORTTIME = 25, | 
 | 	WLAN_STATUS_ASSOC_DENIED_NODSSSOFDM = 26, | 
 | 	/* 802.11i */ | 
 | 	WLAN_STATUS_INVALID_IE = 40, | 
 | 	WLAN_STATUS_INVALID_GROUP_CIPHER = 41, | 
 | 	WLAN_STATUS_INVALID_PAIRWISE_CIPHER = 42, | 
 | 	WLAN_STATUS_INVALID_AKMP = 43, | 
 | 	WLAN_STATUS_UNSUPP_RSN_VERSION = 44, | 
 | 	WLAN_STATUS_INVALID_RSN_IE_CAP = 45, | 
 | 	WLAN_STATUS_CIPHER_SUITE_REJECTED = 46, | 
 | 	/* 802.11e */ | 
 | 	WLAN_STATUS_UNSPECIFIED_QOS = 32, | 
 | 	WLAN_STATUS_ASSOC_DENIED_NOBANDWIDTH = 33, | 
 | 	WLAN_STATUS_ASSOC_DENIED_LOWACK = 34, | 
 | 	WLAN_STATUS_ASSOC_DENIED_UNSUPP_QOS = 35, | 
 | 	WLAN_STATUS_REQUEST_DECLINED = 37, | 
 | 	WLAN_STATUS_INVALID_QOS_PARAM = 38, | 
 | 	WLAN_STATUS_CHANGE_TSPEC = 39, | 
 | 	WLAN_STATUS_WAIT_TS_DELAY = 47, | 
 | 	WLAN_STATUS_NO_DIRECT_LINK = 48, | 
 | 	WLAN_STATUS_STA_NOT_PRESENT = 49, | 
 | 	WLAN_STATUS_STA_NOT_QSTA = 50, | 
 | }; | 
 |  | 
 |  | 
 | /* Reason codes */ | 
 | enum ieee80211_reasoncode { | 
 | 	WLAN_REASON_UNSPECIFIED = 1, | 
 | 	WLAN_REASON_PREV_AUTH_NOT_VALID = 2, | 
 | 	WLAN_REASON_DEAUTH_LEAVING = 3, | 
 | 	WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY = 4, | 
 | 	WLAN_REASON_DISASSOC_AP_BUSY = 5, | 
 | 	WLAN_REASON_CLASS2_FRAME_FROM_NONAUTH_STA = 6, | 
 | 	WLAN_REASON_CLASS3_FRAME_FROM_NONASSOC_STA = 7, | 
 | 	WLAN_REASON_DISASSOC_STA_HAS_LEFT = 8, | 
 | 	WLAN_REASON_STA_REQ_ASSOC_WITHOUT_AUTH = 9, | 
 | 	/* 802.11h */ | 
 | 	WLAN_REASON_DISASSOC_BAD_POWER = 10, | 
 | 	WLAN_REASON_DISASSOC_BAD_SUPP_CHAN = 11, | 
 | 	/* 802.11i */ | 
 | 	WLAN_REASON_INVALID_IE = 13, | 
 | 	WLAN_REASON_MIC_FAILURE = 14, | 
 | 	WLAN_REASON_4WAY_HANDSHAKE_TIMEOUT = 15, | 
 | 	WLAN_REASON_GROUP_KEY_HANDSHAKE_TIMEOUT = 16, | 
 | 	WLAN_REASON_IE_DIFFERENT = 17, | 
 | 	WLAN_REASON_INVALID_GROUP_CIPHER = 18, | 
 | 	WLAN_REASON_INVALID_PAIRWISE_CIPHER = 19, | 
 | 	WLAN_REASON_INVALID_AKMP = 20, | 
 | 	WLAN_REASON_UNSUPP_RSN_VERSION = 21, | 
 | 	WLAN_REASON_INVALID_RSN_IE_CAP = 22, | 
 | 	WLAN_REASON_IEEE8021X_FAILED = 23, | 
 | 	WLAN_REASON_CIPHER_SUITE_REJECTED = 24, | 
 | 	/* 802.11e */ | 
 | 	WLAN_REASON_DISASSOC_UNSPECIFIED_QOS = 32, | 
 | 	WLAN_REASON_DISASSOC_QAP_NO_BANDWIDTH = 33, | 
 | 	WLAN_REASON_DISASSOC_LOW_ACK = 34, | 
 | 	WLAN_REASON_DISASSOC_QAP_EXCEED_TXOP = 35, | 
 | 	WLAN_REASON_QSTA_LEAVE_QBSS = 36, | 
 | 	WLAN_REASON_QSTA_NOT_USE = 37, | 
 | 	WLAN_REASON_QSTA_REQUIRE_SETUP = 38, | 
 | 	WLAN_REASON_QSTA_TIMEOUT = 39, | 
 | 	WLAN_REASON_QSTA_CIPHER_NOT_SUPP = 45, | 
 | }; | 
 |  | 
 |  | 
 | /* Information Element IDs */ | 
 | enum ieee80211_eid { | 
 | 	WLAN_EID_SSID = 0, | 
 | 	WLAN_EID_SUPP_RATES = 1, | 
 | 	WLAN_EID_FH_PARAMS = 2, | 
 | 	WLAN_EID_DS_PARAMS = 3, | 
 | 	WLAN_EID_CF_PARAMS = 4, | 
 | 	WLAN_EID_TIM = 5, | 
 | 	WLAN_EID_IBSS_PARAMS = 6, | 
 | 	WLAN_EID_CHALLENGE = 16, | 
 | 	/* 802.11d */ | 
 | 	WLAN_EID_COUNTRY = 7, | 
 | 	WLAN_EID_HP_PARAMS = 8, | 
 | 	WLAN_EID_HP_TABLE = 9, | 
 | 	WLAN_EID_REQUEST = 10, | 
 | 	/* 802.11e */ | 
 | 	WLAN_EID_QBSS_LOAD = 11, | 
 | 	WLAN_EID_EDCA_PARAM_SET = 12, | 
 | 	WLAN_EID_TSPEC = 13, | 
 | 	WLAN_EID_TCLAS = 14, | 
 | 	WLAN_EID_SCHEDULE = 15, | 
 | 	WLAN_EID_TS_DELAY = 43, | 
 | 	WLAN_EID_TCLAS_PROCESSING = 44, | 
 | 	WLAN_EID_QOS_CAPA = 46, | 
 | 	/* 802.11s | 
 | 	 * | 
 | 	 * All mesh EID numbers are pending IEEE 802.11 ANA approval. | 
 | 	 * The numbers have been incremented from those suggested in | 
 | 	 * 802.11s/D2.0 so that MESH_CONFIG does not conflict with | 
 | 	 * EXT_SUPP_RATES. | 
 | 	 */ | 
 | 	WLAN_EID_MESH_CONFIG = 51, | 
 | 	WLAN_EID_MESH_ID = 52, | 
 | 	WLAN_EID_PEER_LINK = 55, | 
 | 	WLAN_EID_PREQ = 68, | 
 | 	WLAN_EID_PREP = 69, | 
 | 	WLAN_EID_PERR = 70, | 
 | 	/* 802.11h */ | 
 | 	WLAN_EID_PWR_CONSTRAINT = 32, | 
 | 	WLAN_EID_PWR_CAPABILITY = 33, | 
 | 	WLAN_EID_TPC_REQUEST = 34, | 
 | 	WLAN_EID_TPC_REPORT = 35, | 
 | 	WLAN_EID_SUPPORTED_CHANNELS = 36, | 
 | 	WLAN_EID_CHANNEL_SWITCH = 37, | 
 | 	WLAN_EID_MEASURE_REQUEST = 38, | 
 | 	WLAN_EID_MEASURE_REPORT = 39, | 
 | 	WLAN_EID_QUIET = 40, | 
 | 	WLAN_EID_IBSS_DFS = 41, | 
 | 	/* 802.11g */ | 
 | 	WLAN_EID_ERP_INFO = 42, | 
 | 	WLAN_EID_EXT_SUPP_RATES = 50, | 
 | 	/* 802.11n */ | 
 | 	WLAN_EID_HT_CAPABILITY = 45, | 
 | 	WLAN_EID_HT_EXTRA_INFO = 61, | 
 | 	/* 802.11i */ | 
 | 	WLAN_EID_RSN = 48, | 
 | 	WLAN_EID_WPA = 221, | 
 | 	WLAN_EID_GENERIC = 221, | 
 | 	WLAN_EID_VENDOR_SPECIFIC = 221, | 
 | 	WLAN_EID_QOS_PARAMETER = 222 | 
 | }; | 
 |  | 
 | /* Action category code */ | 
 | enum ieee80211_category { | 
 | 	WLAN_CATEGORY_SPECTRUM_MGMT = 0, | 
 | 	WLAN_CATEGORY_QOS = 1, | 
 | 	WLAN_CATEGORY_DLS = 2, | 
 | 	WLAN_CATEGORY_BACK = 3, | 
 | 	WLAN_CATEGORY_WMM = 17, | 
 | }; | 
 |  | 
 | /* BACK action code */ | 
 | enum ieee80211_back_actioncode { | 
 | 	WLAN_ACTION_ADDBA_REQ = 0, | 
 | 	WLAN_ACTION_ADDBA_RESP = 1, | 
 | 	WLAN_ACTION_DELBA = 2, | 
 | }; | 
 |  | 
 | /* BACK (block-ack) parties */ | 
 | enum ieee80211_back_parties { | 
 | 	WLAN_BACK_RECIPIENT = 0, | 
 | 	WLAN_BACK_INITIATOR = 1, | 
 | 	WLAN_BACK_TIMER = 2, | 
 | }; | 
 |  | 
 | /* A-MSDU 802.11n */ | 
 | #define IEEE80211_QOS_CONTROL_A_MSDU_PRESENT 0x0080 | 
 |  | 
 | /* cipher suite selectors */ | 
 | #define WLAN_CIPHER_SUITE_USE_GROUP	0x000FAC00 | 
 | #define WLAN_CIPHER_SUITE_WEP40		0x000FAC01 | 
 | #define WLAN_CIPHER_SUITE_TKIP		0x000FAC02 | 
 | /* reserved: 				0x000FAC03 */ | 
 | #define WLAN_CIPHER_SUITE_CCMP		0x000FAC04 | 
 | #define WLAN_CIPHER_SUITE_WEP104	0x000FAC05 | 
 |  | 
 | #define WLAN_MAX_KEY_LEN		32 | 
 |  | 
 | /** | 
 |  * ieee80211_get_SA - get pointer to SA | 
 |  * | 
 |  * Given an 802.11 frame, this function returns the offset | 
 |  * to the source address (SA). It does not verify that the | 
 |  * header is long enough to contain the address, and the | 
 |  * header must be long enough to contain the frame control | 
 |  * field. | 
 |  * | 
 |  * @hdr: the frame | 
 |  */ | 
 | static inline u8 *ieee80211_get_SA(struct ieee80211_hdr *hdr) | 
 | { | 
 | 	u8 *raw = (u8 *) hdr; | 
 | 	u8 tofrom = (*(raw+1)) & 3; /* get the TODS and FROMDS bits */ | 
 |  | 
 | 	switch (tofrom) { | 
 | 		case 2: | 
 | 			return hdr->addr3; | 
 | 		case 3: | 
 | 			return hdr->addr4; | 
 | 	} | 
 | 	return hdr->addr2; | 
 | } | 
 |  | 
 | /** | 
 |  * ieee80211_get_DA - get pointer to DA | 
 |  * | 
 |  * Given an 802.11 frame, this function returns the offset | 
 |  * to the destination address (DA). It does not verify that | 
 |  * the header is long enough to contain the address, and the | 
 |  * header must be long enough to contain the frame control | 
 |  * field. | 
 |  * | 
 |  * @hdr: the frame | 
 |  */ | 
 | static inline u8 *ieee80211_get_DA(struct ieee80211_hdr *hdr) | 
 | { | 
 | 	u8 *raw = (u8 *) hdr; | 
 | 	u8 to_ds = (*(raw+1)) & 1; /* get the TODS bit */ | 
 |  | 
 | 	if (to_ds) | 
 | 		return hdr->addr3; | 
 | 	return hdr->addr1; | 
 | } | 
 |  | 
 | /** | 
 |  * ieee80211_get_morefrag - determine whether the MOREFRAGS bit is set | 
 |  * | 
 |  * This function determines whether the "more fragments" bit is set | 
 |  * in the frame. | 
 |  * | 
 |  * @hdr: the frame | 
 |  */ | 
 | static inline int ieee80211_get_morefrag(struct ieee80211_hdr *hdr) | 
 | { | 
 | 	return (le16_to_cpu(hdr->frame_control) & | 
 | 		IEEE80211_FCTL_MOREFRAGS) != 0; | 
 | } | 
 |  | 
 | #endif /* IEEE80211_H */ |