| 	.file "reg_round.S" | 
 | /*---------------------------------------------------------------------------+ | 
 |  |  reg_round.S                                                              | | 
 |  |                                                                           | | 
 |  | Rounding/truncation/etc for FPU basic arithmetic functions.               | | 
 |  |                                                                           | | 
 |  | Copyright (C) 1993,1995,1997                                              | | 
 |  |                       W. Metzenthen, 22 Parker St, Ormond, Vic 3163,      | | 
 |  |                       Australia.  E-mail billm@suburbia.net               | | 
 |  |                                                                           | | 
 |  | This code has four possible entry points.                                 | | 
 |  | The following must be entered by a jmp instruction:                       | | 
 |  |   fpu_reg_round, fpu_reg_round_sqrt, and fpu_Arith_exit.                  | | 
 |  |                                                                           | | 
 |  | The FPU_round entry point is intended to be used by C code.               | | 
 |  | From C, call as:                                                          | | 
 |  |  int FPU_round(FPU_REG *arg, unsigned int extent, unsigned int control_w) | | 
 |  |                                                                           | | 
 |  |    Return value is the tag of the answer, or-ed with FPU_Exception if     | | 
 |  |    one was raised, or -1 on internal error.                               | | 
 |  |                                                                           | | 
 |  | For correct "up" and "down" rounding, the argument must have the correct  | | 
 |  | sign.                                                                     | | 
 |  |                                                                           | | 
 |  +---------------------------------------------------------------------------*/ | 
 |  | 
 | /*---------------------------------------------------------------------------+ | 
 |  | Four entry points.                                                        | | 
 |  |                                                                           | | 
 |  | Needed by both the fpu_reg_round and fpu_reg_round_sqrt entry points:     | | 
 |  |  %eax:%ebx  64 bit significand                                            | | 
 |  |  %edx       32 bit extension of the significand                           | | 
 |  |  %edi       pointer to an FPU_REG for the result to be stored             | | 
 |  |  stack      calling function must have set up a C stack frame and         | | 
 |  |             pushed %esi, %edi, and %ebx                                   | | 
 |  |                                                                           | | 
 |  | Needed just for the fpu_reg_round_sqrt entry point:                       | | 
 |  |  %cx  A control word in the same format as the FPU control word.          | | 
 |  | Otherwise, PARAM4 must give such a value.                                 | | 
 |  |                                                                           | | 
 |  |                                                                           | | 
 |  | The significand and its extension are assumed to be exact in the          | | 
 |  | following sense:                                                          | | 
 |  |   If the significand by itself is the exact result then the significand   | | 
 |  |   extension (%edx) must contain 0, otherwise the significand extension    | | 
 |  |   must be non-zero.                                                       | | 
 |  |   If the significand extension is non-zero then the significand is        | | 
 |  |   smaller than the magnitude of the correct exact result by an amount     | | 
 |  |   greater than zero and less than one ls bit of the significand.          | | 
 |  |   The significand extension is only required to have three possible       | | 
 |  |   non-zero values:                                                        | | 
 |  |       less than 0x80000000  <=> the significand is less than 1/2 an ls    | | 
 |  |                                 bit smaller than the magnitude of the     | | 
 |  |                                 true exact result.                        | | 
 |  |         exactly 0x80000000  <=> the significand is exactly 1/2 an ls bit  | | 
 |  |                                 smaller than the magnitude of the true    | | 
 |  |                                 exact result.                             | | 
 |  |    greater than 0x80000000  <=> the significand is more than 1/2 an ls    | | 
 |  |                                 bit smaller than the magnitude of the     | | 
 |  |                                 true exact result.                        | | 
 |  |                                                                           | | 
 |  +---------------------------------------------------------------------------*/ | 
 |  | 
 | /*---------------------------------------------------------------------------+ | 
 |  |  The code in this module has become quite complex, but it should handle   | | 
 |  |  all of the FPU flags which are set at this stage of the basic arithmetic | | 
 |  |  computations.                                                            | | 
 |  |  There are a few rare cases where the results are not set identically to  | | 
 |  |  a real FPU. These require a bit more thought because at this stage the   | | 
 |  |  results of the code here appear to be more consistent...                 | | 
 |  |  This may be changed in a future version.                                 | | 
 |  +---------------------------------------------------------------------------*/ | 
 |  | 
 |  | 
 | #include "fpu_emu.h" | 
 | #include "exception.h" | 
 | #include "control_w.h" | 
 |  | 
 | /* Flags for FPU_bits_lost */ | 
 | #define	LOST_DOWN	$1 | 
 | #define	LOST_UP		$2 | 
 |  | 
 | /* Flags for FPU_denormal */ | 
 | #define	DENORMAL	$1 | 
 | #define	UNMASKED_UNDERFLOW $2 | 
 |  | 
 |  | 
 | #ifndef NON_REENTRANT_FPU | 
 | /*	Make the code re-entrant by putting | 
 | 	local storage on the stack: */ | 
 | #define FPU_bits_lost	(%esp) | 
 | #define FPU_denormal	1(%esp) | 
 |  | 
 | #else | 
 | /*	Not re-entrant, so we can gain speed by putting | 
 | 	local storage in a static area: */ | 
 | .data | 
 | 	.align 4,0 | 
 | FPU_bits_lost: | 
 | 	.byte	0 | 
 | FPU_denormal: | 
 | 	.byte	0 | 
 | #endif /* NON_REENTRANT_FPU */ | 
 |  | 
 |  | 
 | .text | 
 | .globl fpu_reg_round | 
 | .globl fpu_Arith_exit | 
 |  | 
 | /* Entry point when called from C */ | 
 | ENTRY(FPU_round) | 
 | 	pushl	%ebp | 
 | 	movl	%esp,%ebp | 
 | 	pushl	%esi | 
 | 	pushl	%edi | 
 | 	pushl	%ebx | 
 |  | 
 | 	movl	PARAM1,%edi | 
 | 	movl	SIGH(%edi),%eax | 
 | 	movl	SIGL(%edi),%ebx | 
 | 	movl	PARAM2,%edx | 
 |  | 
 | fpu_reg_round:			/* Normal entry point */ | 
 | 	movl	PARAM4,%ecx | 
 |  | 
 | #ifndef NON_REENTRANT_FPU | 
 | 	pushl	%ebx		/* adjust the stack pointer */ | 
 | #endif /* NON_REENTRANT_FPU */  | 
 |  | 
 | #ifdef PARANOID | 
 | /* Cannot use this here yet */ | 
 | /*	orl	%eax,%eax */ | 
 | /*	jns	L_entry_bugged */ | 
 | #endif /* PARANOID */ | 
 |  | 
 | 	cmpw	EXP_UNDER,EXP(%edi) | 
 | 	jle	L_Make_denorm			/* The number is a de-normal */ | 
 |  | 
 | 	movb	$0,FPU_denormal			/* 0 -> not a de-normal */ | 
 |  | 
 | Denorm_done: | 
 | 	movb	$0,FPU_bits_lost		/* No bits yet lost in rounding */ | 
 |  | 
 | 	movl	%ecx,%esi | 
 | 	andl	CW_PC,%ecx | 
 | 	cmpl	PR_64_BITS,%ecx | 
 | 	je	LRound_To_64 | 
 |  | 
 | 	cmpl	PR_53_BITS,%ecx | 
 | 	je	LRound_To_53 | 
 |  | 
 | 	cmpl	PR_24_BITS,%ecx | 
 | 	je	LRound_To_24 | 
 |  | 
 | #ifdef PECULIAR_486 | 
 | /* With the precision control bits set to 01 "(reserved)", a real 80486 | 
 |    behaves as if the precision control bits were set to 11 "64 bits" */ | 
 | 	cmpl	PR_RESERVED_BITS,%ecx | 
 | 	je	LRound_To_64 | 
 | #ifdef PARANOID | 
 | 	jmp	L_bugged_denorm_486 | 
 | #endif /* PARANOID */  | 
 | #else | 
 | #ifdef PARANOID | 
 | 	jmp	L_bugged_denorm	/* There is no bug, just a bad control word */ | 
 | #endif /* PARANOID */  | 
 | #endif /* PECULIAR_486 */ | 
 |  | 
 |  | 
 | /* Round etc to 24 bit precision */ | 
 | LRound_To_24: | 
 | 	movl	%esi,%ecx | 
 | 	andl	CW_RC,%ecx | 
 | 	cmpl	RC_RND,%ecx | 
 | 	je	LRound_nearest_24 | 
 |  | 
 | 	cmpl	RC_CHOP,%ecx | 
 | 	je	LCheck_truncate_24 | 
 |  | 
 | 	cmpl	RC_UP,%ecx		/* Towards +infinity */ | 
 | 	je	LUp_24 | 
 |  | 
 | 	cmpl	RC_DOWN,%ecx		/* Towards -infinity */ | 
 | 	je	LDown_24 | 
 |  | 
 | #ifdef PARANOID | 
 | 	jmp	L_bugged_round24 | 
 | #endif /* PARANOID */  | 
 |  | 
 | LUp_24: | 
 | 	cmpb	SIGN_POS,PARAM5 | 
 | 	jne	LCheck_truncate_24	/* If negative then  up==truncate */ | 
 |  | 
 | 	jmp	LCheck_24_round_up | 
 |  | 
 | LDown_24: | 
 | 	cmpb	SIGN_POS,PARAM5 | 
 | 	je	LCheck_truncate_24	/* If positive then  down==truncate */ | 
 |  | 
 | LCheck_24_round_up: | 
 | 	movl	%eax,%ecx | 
 | 	andl	$0x000000ff,%ecx | 
 | 	orl	%ebx,%ecx | 
 | 	orl	%edx,%ecx | 
 | 	jnz	LDo_24_round_up | 
 | 	jmp	L_Re_normalise | 
 |  | 
 | LRound_nearest_24: | 
 | 	/* Do rounding of the 24th bit if needed (nearest or even) */ | 
 | 	movl	%eax,%ecx | 
 | 	andl	$0x000000ff,%ecx | 
 | 	cmpl	$0x00000080,%ecx | 
 | 	jc	LCheck_truncate_24	/* less than half, no increment needed */ | 
 |  | 
 | 	jne	LGreater_Half_24	/* greater than half, increment needed */ | 
 |  | 
 | 	/* Possibly half, we need to check the ls bits */ | 
 | 	orl	%ebx,%ebx | 
 | 	jnz	LGreater_Half_24	/* greater than half, increment needed */ | 
 |  | 
 | 	orl	%edx,%edx | 
 | 	jnz	LGreater_Half_24	/* greater than half, increment needed */ | 
 |  | 
 | 	/* Exactly half, increment only if 24th bit is 1 (round to even) */ | 
 | 	testl	$0x00000100,%eax | 
 | 	jz	LDo_truncate_24 | 
 |  | 
 | LGreater_Half_24:			/* Rounding: increment at the 24th bit */ | 
 | LDo_24_round_up: | 
 | 	andl	$0xffffff00,%eax	/* Truncate to 24 bits */ | 
 | 	xorl	%ebx,%ebx | 
 | 	movb	LOST_UP,FPU_bits_lost | 
 | 	addl	$0x00000100,%eax | 
 | 	jmp	LCheck_Round_Overflow | 
 |  | 
 | LCheck_truncate_24: | 
 | 	movl	%eax,%ecx | 
 | 	andl	$0x000000ff,%ecx | 
 | 	orl	%ebx,%ecx | 
 | 	orl	%edx,%ecx | 
 | 	jz	L_Re_normalise		/* No truncation needed */ | 
 |  | 
 | LDo_truncate_24: | 
 | 	andl	$0xffffff00,%eax	/* Truncate to 24 bits */ | 
 | 	xorl	%ebx,%ebx | 
 | 	movb	LOST_DOWN,FPU_bits_lost | 
 | 	jmp	L_Re_normalise | 
 |  | 
 |  | 
 | /* Round etc to 53 bit precision */ | 
 | LRound_To_53: | 
 | 	movl	%esi,%ecx | 
 | 	andl	CW_RC,%ecx | 
 | 	cmpl	RC_RND,%ecx | 
 | 	je	LRound_nearest_53 | 
 |  | 
 | 	cmpl	RC_CHOP,%ecx | 
 | 	je	LCheck_truncate_53 | 
 |  | 
 | 	cmpl	RC_UP,%ecx		/* Towards +infinity */ | 
 | 	je	LUp_53 | 
 |  | 
 | 	cmpl	RC_DOWN,%ecx		/* Towards -infinity */ | 
 | 	je	LDown_53 | 
 |  | 
 | #ifdef PARANOID | 
 | 	jmp	L_bugged_round53 | 
 | #endif /* PARANOID */  | 
 |  | 
 | LUp_53: | 
 | 	cmpb	SIGN_POS,PARAM5 | 
 | 	jne	LCheck_truncate_53	/* If negative then  up==truncate */ | 
 |  | 
 | 	jmp	LCheck_53_round_up | 
 |  | 
 | LDown_53: | 
 | 	cmpb	SIGN_POS,PARAM5 | 
 | 	je	LCheck_truncate_53	/* If positive then  down==truncate */ | 
 |  | 
 | LCheck_53_round_up: | 
 | 	movl	%ebx,%ecx | 
 | 	andl	$0x000007ff,%ecx | 
 | 	orl	%edx,%ecx | 
 | 	jnz	LDo_53_round_up | 
 | 	jmp	L_Re_normalise | 
 |  | 
 | LRound_nearest_53: | 
 | 	/* Do rounding of the 53rd bit if needed (nearest or even) */ | 
 | 	movl	%ebx,%ecx | 
 | 	andl	$0x000007ff,%ecx | 
 | 	cmpl	$0x00000400,%ecx | 
 | 	jc	LCheck_truncate_53	/* less than half, no increment needed */ | 
 |  | 
 | 	jnz	LGreater_Half_53	/* greater than half, increment needed */ | 
 |  | 
 | 	/* Possibly half, we need to check the ls bits */ | 
 | 	orl	%edx,%edx | 
 | 	jnz	LGreater_Half_53	/* greater than half, increment needed */ | 
 |  | 
 | 	/* Exactly half, increment only if 53rd bit is 1 (round to even) */ | 
 | 	testl	$0x00000800,%ebx | 
 | 	jz	LTruncate_53 | 
 |  | 
 | LGreater_Half_53:			/* Rounding: increment at the 53rd bit */ | 
 | LDo_53_round_up: | 
 | 	movb	LOST_UP,FPU_bits_lost | 
 | 	andl	$0xfffff800,%ebx	/* Truncate to 53 bits */ | 
 | 	addl	$0x00000800,%ebx | 
 | 	adcl	$0,%eax | 
 | 	jmp	LCheck_Round_Overflow | 
 |  | 
 | LCheck_truncate_53: | 
 | 	movl	%ebx,%ecx | 
 | 	andl	$0x000007ff,%ecx | 
 | 	orl	%edx,%ecx | 
 | 	jz	L_Re_normalise | 
 |  | 
 | LTruncate_53: | 
 | 	movb	LOST_DOWN,FPU_bits_lost | 
 | 	andl	$0xfffff800,%ebx	/* Truncate to 53 bits */ | 
 | 	jmp	L_Re_normalise | 
 |  | 
 |  | 
 | /* Round etc to 64 bit precision */ | 
 | LRound_To_64: | 
 | 	movl	%esi,%ecx | 
 | 	andl	CW_RC,%ecx | 
 | 	cmpl	RC_RND,%ecx | 
 | 	je	LRound_nearest_64 | 
 |  | 
 | 	cmpl	RC_CHOP,%ecx | 
 | 	je	LCheck_truncate_64 | 
 |  | 
 | 	cmpl	RC_UP,%ecx		/* Towards +infinity */ | 
 | 	je	LUp_64 | 
 |  | 
 | 	cmpl	RC_DOWN,%ecx		/* Towards -infinity */ | 
 | 	je	LDown_64 | 
 |  | 
 | #ifdef PARANOID | 
 | 	jmp	L_bugged_round64 | 
 | #endif /* PARANOID */  | 
 |  | 
 | LUp_64: | 
 | 	cmpb	SIGN_POS,PARAM5 | 
 | 	jne	LCheck_truncate_64	/* If negative then  up==truncate */ | 
 |  | 
 | 	orl	%edx,%edx | 
 | 	jnz	LDo_64_round_up | 
 | 	jmp	L_Re_normalise | 
 |  | 
 | LDown_64: | 
 | 	cmpb	SIGN_POS,PARAM5 | 
 | 	je	LCheck_truncate_64	/* If positive then  down==truncate */ | 
 |  | 
 | 	orl	%edx,%edx | 
 | 	jnz	LDo_64_round_up | 
 | 	jmp	L_Re_normalise | 
 |  | 
 | LRound_nearest_64: | 
 | 	cmpl	$0x80000000,%edx | 
 | 	jc	LCheck_truncate_64 | 
 |  | 
 | 	jne	LDo_64_round_up | 
 |  | 
 | 	/* Now test for round-to-even */ | 
 | 	testb	$1,%bl | 
 | 	jz	LCheck_truncate_64 | 
 |  | 
 | LDo_64_round_up: | 
 | 	movb	LOST_UP,FPU_bits_lost | 
 | 	addl	$1,%ebx | 
 | 	adcl	$0,%eax | 
 |  | 
 | LCheck_Round_Overflow: | 
 | 	jnc	L_Re_normalise | 
 |  | 
 | 	/* Overflow, adjust the result (significand to 1.0) */ | 
 | 	rcrl	$1,%eax | 
 | 	rcrl	$1,%ebx | 
 | 	incw	EXP(%edi) | 
 | 	jmp	L_Re_normalise | 
 |  | 
 | LCheck_truncate_64: | 
 | 	orl	%edx,%edx | 
 | 	jz	L_Re_normalise | 
 |  | 
 | LTruncate_64: | 
 | 	movb	LOST_DOWN,FPU_bits_lost | 
 |  | 
 | L_Re_normalise: | 
 | 	testb	$0xff,FPU_denormal | 
 | 	jnz	Normalise_result | 
 |  | 
 | L_Normalised: | 
 | 	movl	TAG_Valid,%edx | 
 |  | 
 | L_deNormalised: | 
 | 	cmpb	LOST_UP,FPU_bits_lost | 
 | 	je	L_precision_lost_up | 
 |  | 
 | 	cmpb	LOST_DOWN,FPU_bits_lost | 
 | 	je	L_precision_lost_down | 
 |  | 
 | L_no_precision_loss: | 
 | 	/* store the result */ | 
 |  | 
 | L_Store_significand: | 
 | 	movl	%eax,SIGH(%edi) | 
 | 	movl	%ebx,SIGL(%edi) | 
 |  | 
 | 	cmpw	EXP_OVER,EXP(%edi) | 
 | 	jge	L_overflow | 
 |  | 
 | 	movl	%edx,%eax | 
 |  | 
 | 	/* Convert the exponent to 80x87 form. */ | 
 | 	addw	EXTENDED_Ebias,EXP(%edi) | 
 | 	andw	$0x7fff,EXP(%edi) | 
 |  | 
 | fpu_reg_round_signed_special_exit: | 
 |  | 
 | 	cmpb	SIGN_POS,PARAM5 | 
 | 	je	fpu_reg_round_special_exit | 
 |  | 
 | 	orw	$0x8000,EXP(%edi)	/* Negative sign for the result. */ | 
 |  | 
 | fpu_reg_round_special_exit: | 
 |  | 
 | #ifndef NON_REENTRANT_FPU | 
 | 	popl	%ebx		/* adjust the stack pointer */ | 
 | #endif /* NON_REENTRANT_FPU */  | 
 |  | 
 | fpu_Arith_exit: | 
 | 	popl	%ebx | 
 | 	popl	%edi | 
 | 	popl	%esi | 
 | 	leave | 
 | 	ret | 
 |  | 
 |  | 
 | /* | 
 |  * Set the FPU status flags to represent precision loss due to | 
 |  * round-up. | 
 |  */ | 
 | L_precision_lost_up: | 
 | 	push	%edx | 
 | 	push	%eax | 
 | 	call	set_precision_flag_up | 
 | 	popl	%eax | 
 | 	popl	%edx | 
 | 	jmp	L_no_precision_loss | 
 |  | 
 | /* | 
 |  * Set the FPU status flags to represent precision loss due to | 
 |  * truncation. | 
 |  */ | 
 | L_precision_lost_down: | 
 | 	push	%edx | 
 | 	push	%eax | 
 | 	call	set_precision_flag_down | 
 | 	popl	%eax | 
 | 	popl	%edx | 
 | 	jmp	L_no_precision_loss | 
 |  | 
 |  | 
 | /* | 
 |  * The number is a denormal (which might get rounded up to a normal) | 
 |  * Shift the number right the required number of bits, which will | 
 |  * have to be undone later... | 
 |  */ | 
 | L_Make_denorm: | 
 | 	/* The action to be taken depends upon whether the underflow | 
 | 	   exception is masked */ | 
 | 	testb	CW_Underflow,%cl		/* Underflow mask. */ | 
 | 	jz	Unmasked_underflow		/* Do not make a denormal. */ | 
 |  | 
 | 	movb	DENORMAL,FPU_denormal | 
 |  | 
 | 	pushl	%ecx		/* Save */ | 
 | 	movw	EXP_UNDER+1,%cx | 
 | 	subw	EXP(%edi),%cx | 
 |  | 
 | 	cmpw	$64,%cx	/* shrd only works for 0..31 bits */ | 
 | 	jnc	Denorm_shift_more_than_63 | 
 |  | 
 | 	cmpw	$32,%cx	/* shrd only works for 0..31 bits */ | 
 | 	jnc	Denorm_shift_more_than_32 | 
 |  | 
 | /* | 
 |  * We got here without jumps by assuming that the most common requirement | 
 |  *   is for a small de-normalising shift. | 
 |  * Shift by [1..31] bits | 
 |  */ | 
 | 	addw	%cx,EXP(%edi) | 
 | 	orl	%edx,%edx	/* extension */ | 
 | 	setne	%ch		/* Save whether %edx is non-zero */ | 
 | 	xorl	%edx,%edx | 
 | 	shrd	%cl,%ebx,%edx | 
 | 	shrd	%cl,%eax,%ebx | 
 | 	shr	%cl,%eax | 
 | 	orb	%ch,%dl | 
 | 	popl	%ecx | 
 | 	jmp	Denorm_done | 
 |  | 
 | /* Shift by [32..63] bits */ | 
 | Denorm_shift_more_than_32: | 
 | 	addw	%cx,EXP(%edi) | 
 | 	subb	$32,%cl | 
 | 	orl	%edx,%edx | 
 | 	setne	%ch | 
 | 	orb	%ch,%bl | 
 | 	xorl	%edx,%edx | 
 | 	shrd	%cl,%ebx,%edx | 
 | 	shrd	%cl,%eax,%ebx | 
 | 	shr	%cl,%eax | 
 | 	orl	%edx,%edx		/* test these 32 bits */ | 
 | 	setne	%cl | 
 | 	orb	%ch,%bl | 
 | 	orb	%cl,%bl | 
 | 	movl	%ebx,%edx | 
 | 	movl	%eax,%ebx | 
 | 	xorl	%eax,%eax | 
 | 	popl	%ecx | 
 | 	jmp	Denorm_done | 
 |  | 
 | /* Shift by [64..) bits */ | 
 | Denorm_shift_more_than_63: | 
 | 	cmpw	$64,%cx | 
 | 	jne	Denorm_shift_more_than_64 | 
 |  | 
 | /* Exactly 64 bit shift */ | 
 | 	addw	%cx,EXP(%edi) | 
 | 	xorl	%ecx,%ecx | 
 | 	orl	%edx,%edx | 
 | 	setne	%cl | 
 | 	orl	%ebx,%ebx | 
 | 	setne	%ch | 
 | 	orb	%ch,%cl | 
 | 	orb	%cl,%al | 
 | 	movl	%eax,%edx | 
 | 	xorl	%eax,%eax | 
 | 	xorl	%ebx,%ebx | 
 | 	popl	%ecx | 
 | 	jmp	Denorm_done | 
 |  | 
 | Denorm_shift_more_than_64: | 
 | 	movw	EXP_UNDER+1,EXP(%edi) | 
 | /* This is easy, %eax must be non-zero, so.. */ | 
 | 	movl	$1,%edx | 
 | 	xorl	%eax,%eax | 
 | 	xorl	%ebx,%ebx | 
 | 	popl	%ecx | 
 | 	jmp	Denorm_done | 
 |  | 
 |  | 
 | Unmasked_underflow: | 
 | 	movb	UNMASKED_UNDERFLOW,FPU_denormal | 
 | 	jmp	Denorm_done | 
 |  | 
 |  | 
 | /* Undo the de-normalisation. */ | 
 | Normalise_result: | 
 | 	cmpb	UNMASKED_UNDERFLOW,FPU_denormal | 
 | 	je	Signal_underflow | 
 |  | 
 | /* The number must be a denormal if we got here. */ | 
 | #ifdef PARANOID | 
 | 	/* But check it... just in case. */ | 
 | 	cmpw	EXP_UNDER+1,EXP(%edi) | 
 | 	jne	L_norm_bugged | 
 | #endif /* PARANOID */ | 
 |  | 
 | #ifdef PECULIAR_486 | 
 | 	/* | 
 | 	 * This implements a special feature of 80486 behaviour. | 
 | 	 * Underflow will be signalled even if the number is | 
 | 	 * not a denormal after rounding. | 
 | 	 * This difference occurs only for masked underflow, and not | 
 | 	 * in the unmasked case. | 
 | 	 * Actual 80486 behaviour differs from this in some circumstances. | 
 | 	 */ | 
 | 	orl	%eax,%eax		/* ms bits */ | 
 | 	js	LPseudoDenormal		/* Will be masked underflow */ | 
 | #else | 
 | 	orl	%eax,%eax		/* ms bits */ | 
 | 	js	L_Normalised		/* No longer a denormal */ | 
 | #endif /* PECULIAR_486 */  | 
 |  | 
 | 	jnz	LDenormal_adj_exponent | 
 |  | 
 | 	orl	%ebx,%ebx | 
 | 	jz	L_underflow_to_zero	/* The contents are zero */ | 
 |  | 
 | LDenormal_adj_exponent: | 
 | 	decw	EXP(%edi) | 
 |  | 
 | LPseudoDenormal: | 
 | 	testb	$0xff,FPU_bits_lost	/* bits lost == underflow */ | 
 | 	movl	TAG_Special,%edx | 
 | 	jz	L_deNormalised | 
 |  | 
 | 	/* There must be a masked underflow */ | 
 | 	push	%eax | 
 | 	pushl	EX_Underflow | 
 | 	call	EXCEPTION | 
 | 	popl	%eax | 
 | 	popl	%eax | 
 | 	movl	TAG_Special,%edx | 
 | 	jmp	L_deNormalised | 
 |  | 
 |  | 
 | /* | 
 |  * The operations resulted in a number too small to represent. | 
 |  * Masked response. | 
 |  */ | 
 | L_underflow_to_zero: | 
 | 	push	%eax | 
 | 	call	set_precision_flag_down | 
 | 	popl	%eax | 
 |  | 
 | 	push	%eax | 
 | 	pushl	EX_Underflow | 
 | 	call	EXCEPTION | 
 | 	popl	%eax | 
 | 	popl	%eax | 
 |  | 
 | /* Reduce the exponent to EXP_UNDER */ | 
 | 	movw	EXP_UNDER,EXP(%edi) | 
 | 	movl	TAG_Zero,%edx | 
 | 	jmp	L_Store_significand | 
 |  | 
 |  | 
 | /* The operations resulted in a number too large to represent. */ | 
 | L_overflow: | 
 | 	addw	EXTENDED_Ebias,EXP(%edi)	/* Set for unmasked response. */ | 
 | 	push	%edi | 
 | 	call	arith_overflow | 
 | 	pop	%edi | 
 | 	jmp	fpu_reg_round_signed_special_exit | 
 |  | 
 |  | 
 | Signal_underflow: | 
 | 	/* The number may have been changed to a non-denormal */ | 
 | 	/* by the rounding operations. */ | 
 | 	cmpw	EXP_UNDER,EXP(%edi) | 
 | 	jle	Do_unmasked_underflow | 
 |  | 
 | 	jmp	L_Normalised | 
 |  | 
 | Do_unmasked_underflow: | 
 | 	/* Increase the exponent by the magic number */ | 
 | 	addw	$(3*(1<<13)),EXP(%edi) | 
 | 	push	%eax | 
 | 	pushl	EX_Underflow | 
 | 	call	EXCEPTION | 
 | 	popl	%eax | 
 | 	popl	%eax | 
 | 	jmp	L_Normalised | 
 |  | 
 |  | 
 | #ifdef PARANOID | 
 | #ifdef PECULIAR_486 | 
 | L_bugged_denorm_486: | 
 | 	pushl	EX_INTERNAL|0x236 | 
 | 	call	EXCEPTION | 
 | 	popl	%ebx | 
 | 	jmp	L_exception_exit | 
 | #else | 
 | L_bugged_denorm: | 
 | 	pushl	EX_INTERNAL|0x230 | 
 | 	call	EXCEPTION | 
 | 	popl	%ebx | 
 | 	jmp	L_exception_exit | 
 | #endif /* PECULIAR_486 */  | 
 |  | 
 | L_bugged_round24: | 
 | 	pushl	EX_INTERNAL|0x231 | 
 | 	call	EXCEPTION | 
 | 	popl	%ebx | 
 | 	jmp	L_exception_exit | 
 |  | 
 | L_bugged_round53: | 
 | 	pushl	EX_INTERNAL|0x232 | 
 | 	call	EXCEPTION | 
 | 	popl	%ebx | 
 | 	jmp	L_exception_exit | 
 |  | 
 | L_bugged_round64: | 
 | 	pushl	EX_INTERNAL|0x233 | 
 | 	call	EXCEPTION | 
 | 	popl	%ebx | 
 | 	jmp	L_exception_exit | 
 |  | 
 | L_norm_bugged: | 
 | 	pushl	EX_INTERNAL|0x234 | 
 | 	call	EXCEPTION | 
 | 	popl	%ebx | 
 | 	jmp	L_exception_exit | 
 |  | 
 | L_entry_bugged: | 
 | 	pushl	EX_INTERNAL|0x235 | 
 | 	call	EXCEPTION | 
 | 	popl	%ebx | 
 | L_exception_exit: | 
 | 	mov	$-1,%eax | 
 | 	jmp	fpu_reg_round_special_exit | 
 | #endif /* PARANOID */  |