|  | #include <net/mac80211.h> | 
|  | #include <net/rtnetlink.h> | 
|  |  | 
|  | #include "ieee80211_i.h" | 
|  | #include "led.h" | 
|  |  | 
|  | int __ieee80211_suspend(struct ieee80211_hw *hw) | 
|  | { | 
|  | struct ieee80211_local *local = hw_to_local(hw); | 
|  | struct ieee80211_sub_if_data *sdata; | 
|  | struct ieee80211_if_init_conf conf; | 
|  | struct sta_info *sta; | 
|  | unsigned long flags; | 
|  |  | 
|  | ieee80211_stop_queues_by_reason(hw, | 
|  | IEEE80211_QUEUE_STOP_REASON_SUSPEND); | 
|  |  | 
|  | flush_workqueue(local->hw.workqueue); | 
|  |  | 
|  | /* disable keys */ | 
|  | list_for_each_entry(sdata, &local->interfaces, list) | 
|  | ieee80211_disable_keys(sdata); | 
|  |  | 
|  | /* Tear down aggregation sessions */ | 
|  |  | 
|  | rcu_read_lock(); | 
|  |  | 
|  | if (hw->flags & IEEE80211_HW_AMPDU_AGGREGATION) { | 
|  | list_for_each_entry_rcu(sta, &local->sta_list, list) { | 
|  | set_sta_flags(sta, WLAN_STA_SUSPEND); | 
|  | ieee80211_sta_tear_down_BA_sessions(sta); | 
|  | } | 
|  | } | 
|  |  | 
|  | rcu_read_unlock(); | 
|  |  | 
|  | /* remove STAs */ | 
|  | if (local->ops->sta_notify) { | 
|  | spin_lock_irqsave(&local->sta_lock, flags); | 
|  | list_for_each_entry(sta, &local->sta_list, list) { | 
|  | if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN) | 
|  | sdata = container_of(sdata->bss, | 
|  | struct ieee80211_sub_if_data, | 
|  | u.ap); | 
|  |  | 
|  | local->ops->sta_notify(hw, &sdata->vif, | 
|  | STA_NOTIFY_REMOVE, &sta->sta); | 
|  | } | 
|  | spin_unlock_irqrestore(&local->sta_lock, flags); | 
|  | } | 
|  |  | 
|  | /* remove all interfaces */ | 
|  | list_for_each_entry(sdata, &local->interfaces, list) { | 
|  | if (sdata->vif.type != NL80211_IFTYPE_AP_VLAN && | 
|  | sdata->vif.type != NL80211_IFTYPE_MONITOR && | 
|  | netif_running(sdata->dev)) { | 
|  | conf.vif = &sdata->vif; | 
|  | conf.type = sdata->vif.type; | 
|  | conf.mac_addr = sdata->dev->dev_addr; | 
|  | local->ops->remove_interface(hw, &conf); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* flush again, in case driver queued work */ | 
|  | flush_workqueue(local->hw.workqueue); | 
|  |  | 
|  | /* stop hardware */ | 
|  | if (local->open_count) { | 
|  | ieee80211_led_radio(local, false); | 
|  | local->ops->stop(hw); | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int __ieee80211_resume(struct ieee80211_hw *hw) | 
|  | { | 
|  | struct ieee80211_local *local = hw_to_local(hw); | 
|  | struct ieee80211_sub_if_data *sdata; | 
|  | struct ieee80211_if_init_conf conf; | 
|  | struct sta_info *sta; | 
|  | unsigned long flags; | 
|  | int res; | 
|  |  | 
|  | /* restart hardware */ | 
|  | if (local->open_count) { | 
|  | res = local->ops->start(hw); | 
|  |  | 
|  | ieee80211_led_radio(local, hw->conf.radio_enabled); | 
|  | } | 
|  |  | 
|  | /* add interfaces */ | 
|  | list_for_each_entry(sdata, &local->interfaces, list) { | 
|  | if (sdata->vif.type != NL80211_IFTYPE_AP_VLAN && | 
|  | sdata->vif.type != NL80211_IFTYPE_MONITOR && | 
|  | netif_running(sdata->dev)) { | 
|  | conf.vif = &sdata->vif; | 
|  | conf.type = sdata->vif.type; | 
|  | conf.mac_addr = sdata->dev->dev_addr; | 
|  | res = local->ops->add_interface(hw, &conf); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* add STAs back */ | 
|  | if (local->ops->sta_notify) { | 
|  | spin_lock_irqsave(&local->sta_lock, flags); | 
|  | list_for_each_entry(sta, &local->sta_list, list) { | 
|  | if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN) | 
|  | sdata = container_of(sdata->bss, | 
|  | struct ieee80211_sub_if_data, | 
|  | u.ap); | 
|  |  | 
|  | local->ops->sta_notify(hw, &sdata->vif, | 
|  | STA_NOTIFY_ADD, &sta->sta); | 
|  | } | 
|  | spin_unlock_irqrestore(&local->sta_lock, flags); | 
|  | } | 
|  |  | 
|  | /* Clear Suspend state so that ADDBA requests can be processed */ | 
|  |  | 
|  | rcu_read_lock(); | 
|  |  | 
|  | if (hw->flags & IEEE80211_HW_AMPDU_AGGREGATION) { | 
|  | list_for_each_entry_rcu(sta, &local->sta_list, list) { | 
|  | clear_sta_flags(sta, WLAN_STA_SUSPEND); | 
|  | } | 
|  | } | 
|  |  | 
|  | rcu_read_unlock(); | 
|  |  | 
|  | /* add back keys */ | 
|  | list_for_each_entry(sdata, &local->interfaces, list) | 
|  | if (netif_running(sdata->dev)) | 
|  | ieee80211_enable_keys(sdata); | 
|  |  | 
|  | /* setup RTS threshold */ | 
|  | if (local->ops->set_rts_threshold) | 
|  | local->ops->set_rts_threshold(hw, local->rts_threshold); | 
|  |  | 
|  | /* reconfigure hardware */ | 
|  | ieee80211_hw_config(local, ~0); | 
|  |  | 
|  | netif_addr_lock_bh(local->mdev); | 
|  | ieee80211_configure_filter(local); | 
|  | netif_addr_unlock_bh(local->mdev); | 
|  |  | 
|  | /* Finally also reconfigure all the BSS information */ | 
|  | list_for_each_entry(sdata, &local->interfaces, list) { | 
|  | u32 changed = ~0; | 
|  | if (!netif_running(sdata->dev)) | 
|  | continue; | 
|  | switch (sdata->vif.type) { | 
|  | case NL80211_IFTYPE_STATION: | 
|  | /* disable beacon change bits */ | 
|  | changed &= ~IEEE80211_IFCC_BEACON; | 
|  | /* fall through */ | 
|  | case NL80211_IFTYPE_ADHOC: | 
|  | case NL80211_IFTYPE_AP: | 
|  | case NL80211_IFTYPE_MESH_POINT: | 
|  | /* | 
|  | * Driver's config_interface can fail if rfkill is | 
|  | * enabled. Accommodate this return code. | 
|  | * FIXME: When mac80211 has knowledge of rfkill | 
|  | * state the code below can change back to: | 
|  | *   WARN(ieee80211_if_config(sdata, changed)); | 
|  | *   ieee80211_bss_info_change_notify(sdata, ~0); | 
|  | */ | 
|  | if (ieee80211_if_config(sdata, changed)) | 
|  | printk(KERN_DEBUG "%s: failed to configure interface during resume\n", | 
|  | sdata->dev->name); | 
|  | else | 
|  | ieee80211_bss_info_change_notify(sdata, ~0); | 
|  | break; | 
|  | case NL80211_IFTYPE_WDS: | 
|  | break; | 
|  | case NL80211_IFTYPE_AP_VLAN: | 
|  | case NL80211_IFTYPE_MONITOR: | 
|  | /* ignore virtual */ | 
|  | break; | 
|  | case NL80211_IFTYPE_UNSPECIFIED: | 
|  | case __NL80211_IFTYPE_AFTER_LAST: | 
|  | WARN_ON(1); | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | ieee80211_wake_queues_by_reason(hw, | 
|  | IEEE80211_QUEUE_STOP_REASON_SUSPEND); | 
|  |  | 
|  | return 0; | 
|  | } |