|  |  | 
|  | /****************************************************************************** | 
|  | * | 
|  | * Name: hwtimer.c - ACPI Power Management Timer Interface | 
|  | * | 
|  | *****************************************************************************/ | 
|  |  | 
|  | /* | 
|  | * Copyright (C) 2000 - 2007, R. Byron Moore | 
|  | * All rights reserved. | 
|  | * | 
|  | * Redistribution and use in source and binary forms, with or without | 
|  | * modification, are permitted provided that the following conditions | 
|  | * are met: | 
|  | * 1. Redistributions of source code must retain the above copyright | 
|  | *    notice, this list of conditions, and the following disclaimer, | 
|  | *    without modification. | 
|  | * 2. Redistributions in binary form must reproduce at minimum a disclaimer | 
|  | *    substantially similar to the "NO WARRANTY" disclaimer below | 
|  | *    ("Disclaimer") and any redistribution must be conditioned upon | 
|  | *    including a substantially similar Disclaimer requirement for further | 
|  | *    binary redistribution. | 
|  | * 3. Neither the names of the above-listed copyright holders nor the names | 
|  | *    of any contributors may be used to endorse or promote products derived | 
|  | *    from this software without specific prior written permission. | 
|  | * | 
|  | * Alternatively, this software may be distributed under the terms of the | 
|  | * GNU General Public License ("GPL") version 2 as published by the Free | 
|  | * Software Foundation. | 
|  | * | 
|  | * NO WARRANTY | 
|  | * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS | 
|  | * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT | 
|  | * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR | 
|  | * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT | 
|  | * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL | 
|  | * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS | 
|  | * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) | 
|  | * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, | 
|  | * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING | 
|  | * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE | 
|  | * POSSIBILITY OF SUCH DAMAGES. | 
|  | */ | 
|  |  | 
|  | #include <acpi/acpi.h> | 
|  |  | 
|  | #define _COMPONENT          ACPI_HARDWARE | 
|  | ACPI_MODULE_NAME("hwtimer") | 
|  |  | 
|  | /****************************************************************************** | 
|  | * | 
|  | * FUNCTION:    acpi_get_timer_resolution | 
|  | * | 
|  | * PARAMETERS:  Resolution          - Where the resolution is returned | 
|  | * | 
|  | * RETURN:      Status and timer resolution | 
|  | * | 
|  | * DESCRIPTION: Obtains resolution of the ACPI PM Timer (24 or 32 bits). | 
|  | * | 
|  | ******************************************************************************/ | 
|  | acpi_status acpi_get_timer_resolution(u32 * resolution) | 
|  | { | 
|  | ACPI_FUNCTION_TRACE(acpi_get_timer_resolution); | 
|  |  | 
|  | if (!resolution) { | 
|  | return_ACPI_STATUS(AE_BAD_PARAMETER); | 
|  | } | 
|  |  | 
|  | if ((acpi_gbl_FADT.flags & ACPI_FADT_32BIT_TIMER) == 0) { | 
|  | *resolution = 24; | 
|  | } else { | 
|  | *resolution = 32; | 
|  | } | 
|  |  | 
|  | return_ACPI_STATUS(AE_OK); | 
|  | } | 
|  |  | 
|  | ACPI_EXPORT_SYMBOL(acpi_get_timer_resolution) | 
|  |  | 
|  | /****************************************************************************** | 
|  | * | 
|  | * FUNCTION:    acpi_get_timer | 
|  | * | 
|  | * PARAMETERS:  Ticks               - Where the timer value is returned | 
|  | * | 
|  | * RETURN:      Status and current timer value (ticks) | 
|  | * | 
|  | * DESCRIPTION: Obtains current value of ACPI PM Timer (in ticks). | 
|  | * | 
|  | ******************************************************************************/ | 
|  | acpi_status acpi_get_timer(u32 * ticks) | 
|  | { | 
|  | acpi_status status; | 
|  |  | 
|  | ACPI_FUNCTION_TRACE(acpi_get_timer); | 
|  |  | 
|  | if (!ticks) { | 
|  | return_ACPI_STATUS(AE_BAD_PARAMETER); | 
|  | } | 
|  |  | 
|  | status = | 
|  | acpi_hw_low_level_read(32, ticks, &acpi_gbl_FADT.xpm_timer_block); | 
|  |  | 
|  | return_ACPI_STATUS(status); | 
|  | } | 
|  |  | 
|  | ACPI_EXPORT_SYMBOL(acpi_get_timer) | 
|  |  | 
|  | /****************************************************************************** | 
|  | * | 
|  | * FUNCTION:    acpi_get_timer_duration | 
|  | * | 
|  | * PARAMETERS:  start_ticks         - Starting timestamp | 
|  | *              end_ticks           - End timestamp | 
|  | *              time_elapsed        - Where the elapsed time is returned | 
|  | * | 
|  | * RETURN:      Status and time_elapsed | 
|  | * | 
|  | * DESCRIPTION: Computes the time elapsed (in microseconds) between two | 
|  | *              PM Timer time stamps, taking into account the possibility of | 
|  | *              rollovers, the timer resolution, and timer frequency. | 
|  | * | 
|  | *              The PM Timer's clock ticks at roughly 3.6 times per | 
|  | *              _microsecond_, and its clock continues through Cx state | 
|  | *              transitions (unlike many CPU timestamp counters) -- making it | 
|  | *              a versatile and accurate timer. | 
|  | * | 
|  | *              Note that this function accommodates only a single timer | 
|  | *              rollover.  Thus for 24-bit timers, this function should only | 
|  | *              be used for calculating durations less than ~4.6 seconds | 
|  | *              (~20 minutes for 32-bit timers) -- calculations below: | 
|  | * | 
|  | *              2**24 Ticks / 3,600,000 Ticks/Sec = 4.66 sec | 
|  | *              2**32 Ticks / 3,600,000 Ticks/Sec = 1193 sec or 19.88 minutes | 
|  | * | 
|  | ******************************************************************************/ | 
|  | acpi_status | 
|  | acpi_get_timer_duration(u32 start_ticks, u32 end_ticks, u32 * time_elapsed) | 
|  | { | 
|  | acpi_status status; | 
|  | u32 delta_ticks; | 
|  | acpi_integer quotient; | 
|  |  | 
|  | ACPI_FUNCTION_TRACE(acpi_get_timer_duration); | 
|  |  | 
|  | if (!time_elapsed) { | 
|  | return_ACPI_STATUS(AE_BAD_PARAMETER); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Compute Tick Delta: | 
|  | * Handle (max one) timer rollovers on 24-bit versus 32-bit timers. | 
|  | */ | 
|  | if (start_ticks < end_ticks) { | 
|  | delta_ticks = end_ticks - start_ticks; | 
|  | } else if (start_ticks > end_ticks) { | 
|  | if ((acpi_gbl_FADT.flags & ACPI_FADT_32BIT_TIMER) == 0) { | 
|  |  | 
|  | /* 24-bit Timer */ | 
|  |  | 
|  | delta_ticks = | 
|  | (((0x00FFFFFF - start_ticks) + | 
|  | end_ticks) & 0x00FFFFFF); | 
|  | } else { | 
|  | /* 32-bit Timer */ | 
|  |  | 
|  | delta_ticks = (0xFFFFFFFF - start_ticks) + end_ticks; | 
|  | } | 
|  | } else {		/* start_ticks == end_ticks */ | 
|  |  | 
|  | *time_elapsed = 0; | 
|  | return_ACPI_STATUS(AE_OK); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Compute Duration (Requires a 64-bit multiply and divide): | 
|  | * | 
|  | * time_elapsed = (delta_ticks * 1000000) / PM_TIMER_FREQUENCY; | 
|  | */ | 
|  | status = acpi_ut_short_divide(((u64) delta_ticks) * 1000000, | 
|  | PM_TIMER_FREQUENCY, "ient, NULL); | 
|  |  | 
|  | *time_elapsed = (u32) quotient; | 
|  | return_ACPI_STATUS(status); | 
|  | } | 
|  |  | 
|  | ACPI_EXPORT_SYMBOL(acpi_get_timer_duration) |