|  | /* | 
|  | * MixCom Watchdog: A Simple Hardware Watchdog Device | 
|  | * Based on Softdog driver by Alan Cox and PC Watchdog driver by Ken Hollis | 
|  | * | 
|  | * Author: Gergely Madarasz <gorgo@itc.hu> | 
|  | * | 
|  | * Copyright (c) 1999 ITConsult-Pro Co. <info@itc.hu> | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or | 
|  | * modify it under the terms of the GNU General Public License | 
|  | * as published by the Free Software Foundation; either version | 
|  | * 2 of the License, or (at your option) any later version. | 
|  | * | 
|  | * Version 0.1 (99/04/15): | 
|  | *		- first version | 
|  | * | 
|  | * Version 0.2 (99/06/16): | 
|  | *		- added kernel timer watchdog ping after close | 
|  | *		  since the hardware does not support watchdog shutdown | 
|  | * | 
|  | * Version 0.3 (99/06/21): | 
|  | *		- added WDIOC_GETSTATUS and WDIOC_GETSUPPORT ioctl calls | 
|  | * | 
|  | * Version 0.3.1 (99/06/22): | 
|  | *		- allow module removal while internal timer is active, | 
|  | *		  print warning about probable reset | 
|  | * | 
|  | * Version 0.4 (99/11/15): | 
|  | *		- support for one more type board | 
|  | * | 
|  | * Version 0.5 (2001/12/14) Matt Domsch <Matt_Domsch@dell.com> | 
|  | *              - added nowayout module option to override CONFIG_WATCHDOG_NOWAYOUT | 
|  | * | 
|  | */ | 
|  |  | 
|  | #define VERSION "0.5" | 
|  |  | 
|  | #include <linux/module.h> | 
|  | #include <linux/moduleparam.h> | 
|  | #include <linux/types.h> | 
|  | #include <linux/miscdevice.h> | 
|  | #include <linux/ioport.h> | 
|  | #include <linux/watchdog.h> | 
|  | #include <linux/fs.h> | 
|  | #include <linux/reboot.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/jiffies.h> | 
|  | #include <linux/timer.h> | 
|  | #include <asm/uaccess.h> | 
|  | #include <asm/io.h> | 
|  |  | 
|  | static int mixcomwd_ioports[] = { 0x180, 0x280, 0x380, 0x000 }; | 
|  |  | 
|  | #define MIXCOM_WATCHDOG_OFFSET 0xc10 | 
|  | #define MIXCOM_ID 0x11 | 
|  | #define FLASHCOM_WATCHDOG_OFFSET 0x4 | 
|  | #define FLASHCOM_ID 0x18 | 
|  |  | 
|  | static void mixcomwd_timerfun(unsigned long d); | 
|  |  | 
|  | static unsigned long mixcomwd_opened; /* long req'd for setbit --RR */ | 
|  |  | 
|  | static int watchdog_port; | 
|  | static int mixcomwd_timer_alive; | 
|  | static DEFINE_TIMER(mixcomwd_timer, mixcomwd_timerfun, 0, 0); | 
|  | static char expect_close; | 
|  |  | 
|  | static int nowayout = WATCHDOG_NOWAYOUT; | 
|  | module_param(nowayout, int, 0); | 
|  | MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); | 
|  |  | 
|  | static void mixcomwd_ping(void) | 
|  | { | 
|  | outb_p(55,watchdog_port); | 
|  | return; | 
|  | } | 
|  |  | 
|  | static void mixcomwd_timerfun(unsigned long d) | 
|  | { | 
|  | mixcomwd_ping(); | 
|  |  | 
|  | mod_timer(&mixcomwd_timer, jiffies + 5 * HZ); | 
|  | } | 
|  |  | 
|  | /* | 
|  | *	Allow only one person to hold it open | 
|  | */ | 
|  |  | 
|  | static int mixcomwd_open(struct inode *inode, struct file *file) | 
|  | { | 
|  | if(test_and_set_bit(0,&mixcomwd_opened)) { | 
|  | return -EBUSY; | 
|  | } | 
|  | mixcomwd_ping(); | 
|  |  | 
|  | if (nowayout) { | 
|  | /* | 
|  | * fops_get() code via open() has already done | 
|  | * a try_module_get() so it is safe to do the | 
|  | * __module_get(). | 
|  | */ | 
|  | __module_get(THIS_MODULE); | 
|  | } else { | 
|  | if(mixcomwd_timer_alive) { | 
|  | del_timer(&mixcomwd_timer); | 
|  | mixcomwd_timer_alive=0; | 
|  | } | 
|  | } | 
|  | return nonseekable_open(inode, file); | 
|  | } | 
|  |  | 
|  | static int mixcomwd_release(struct inode *inode, struct file *file) | 
|  | { | 
|  | if (expect_close == 42) { | 
|  | if(mixcomwd_timer_alive) { | 
|  | printk(KERN_ERR "mixcomwd: release called while internal timer alive"); | 
|  | return -EBUSY; | 
|  | } | 
|  | mixcomwd_timer_alive=1; | 
|  | mod_timer(&mixcomwd_timer, jiffies + 5 * HZ); | 
|  | } else { | 
|  | printk(KERN_CRIT "mixcomwd: WDT device closed unexpectedly.  WDT will not stop!\n"); | 
|  | } | 
|  |  | 
|  | clear_bit(0,&mixcomwd_opened); | 
|  | expect_close=0; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | static ssize_t mixcomwd_write(struct file *file, const char __user *data, size_t len, loff_t *ppos) | 
|  | { | 
|  | if(len) | 
|  | { | 
|  | if (!nowayout) { | 
|  | size_t i; | 
|  |  | 
|  | /* In case it was set long ago */ | 
|  | expect_close = 0; | 
|  |  | 
|  | for (i = 0; i != len; i++) { | 
|  | char c; | 
|  | if (get_user(c, data + i)) | 
|  | return -EFAULT; | 
|  | if (c == 'V') | 
|  | expect_close = 42; | 
|  | } | 
|  | } | 
|  | mixcomwd_ping(); | 
|  | } | 
|  | return len; | 
|  | } | 
|  |  | 
|  | static int mixcomwd_ioctl(struct inode *inode, struct file *file, | 
|  | unsigned int cmd, unsigned long arg) | 
|  | { | 
|  | void __user *argp = (void __user *)arg; | 
|  | int __user *p = argp; | 
|  | int status; | 
|  | static struct watchdog_info ident = { | 
|  | .options = WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE, | 
|  | .firmware_version = 1, | 
|  | .identity = "MixCOM watchdog", | 
|  | }; | 
|  |  | 
|  | switch(cmd) | 
|  | { | 
|  | case WDIOC_GETSTATUS: | 
|  | status=mixcomwd_opened; | 
|  | if (!nowayout) { | 
|  | status|=mixcomwd_timer_alive; | 
|  | } | 
|  | if (copy_to_user(p, &status, sizeof(int))) { | 
|  | return -EFAULT; | 
|  | } | 
|  | break; | 
|  | case WDIOC_GETSUPPORT: | 
|  | if (copy_to_user(argp, &ident, sizeof(ident))) { | 
|  | return -EFAULT; | 
|  | } | 
|  | break; | 
|  | case WDIOC_KEEPALIVE: | 
|  | mixcomwd_ping(); | 
|  | break; | 
|  | default: | 
|  | return -ENOTTY; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct file_operations mixcomwd_fops= | 
|  | { | 
|  | .owner		= THIS_MODULE, | 
|  | .llseek		= no_llseek, | 
|  | .write		= mixcomwd_write, | 
|  | .ioctl		= mixcomwd_ioctl, | 
|  | .open		= mixcomwd_open, | 
|  | .release	= mixcomwd_release, | 
|  | }; | 
|  |  | 
|  | static struct miscdevice mixcomwd_miscdev= | 
|  | { | 
|  | .minor	= WATCHDOG_MINOR, | 
|  | .name	= "watchdog", | 
|  | .fops	= &mixcomwd_fops, | 
|  | }; | 
|  |  | 
|  | static int __init mixcomwd_checkcard(int port) | 
|  | { | 
|  | int id; | 
|  |  | 
|  | port += MIXCOM_WATCHDOG_OFFSET; | 
|  | if (!request_region(port, 1, "MixCOM watchdog")) { | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | id=inb_p(port) & 0x3f; | 
|  | if(id!=MIXCOM_ID) { | 
|  | release_region(port, 1); | 
|  | return 0; | 
|  | } | 
|  | return port; | 
|  | } | 
|  |  | 
|  | static int __init flashcom_checkcard(int port) | 
|  | { | 
|  | int id; | 
|  |  | 
|  | port += FLASHCOM_WATCHDOG_OFFSET; | 
|  | if (!request_region(port, 1, "MixCOM watchdog")) { | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | id=inb_p(port); | 
|  | if(id!=FLASHCOM_ID) { | 
|  | release_region(port, 1); | 
|  | return 0; | 
|  | } | 
|  | return port; | 
|  | } | 
|  |  | 
|  | static int __init mixcomwd_init(void) | 
|  | { | 
|  | int i; | 
|  | int ret; | 
|  | int found=0; | 
|  |  | 
|  | for (i = 0; !found && mixcomwd_ioports[i] != 0; i++) { | 
|  | watchdog_port = mixcomwd_checkcard(mixcomwd_ioports[i]); | 
|  | if (watchdog_port) { | 
|  | found = 1; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* The FlashCOM card can be set up at 0x300 -> 0x378, in 0x8 jumps */ | 
|  | for (i = 0x300; !found && i < 0x380; i+=0x8) { | 
|  | watchdog_port = flashcom_checkcard(i); | 
|  | if (watchdog_port) { | 
|  | found = 1; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (!found) { | 
|  | printk("mixcomwd: No card detected, or port not available.\n"); | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | ret = misc_register(&mixcomwd_miscdev); | 
|  | if (ret) | 
|  | { | 
|  | release_region(watchdog_port, 1); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | printk(KERN_INFO "MixCOM watchdog driver v%s, watchdog port at 0x%3x\n",VERSION,watchdog_port); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void __exit mixcomwd_exit(void) | 
|  | { | 
|  | if (!nowayout) { | 
|  | if(mixcomwd_timer_alive) { | 
|  | printk(KERN_WARNING "mixcomwd: I quit now, hardware will" | 
|  | " probably reboot!\n"); | 
|  | del_timer_sync(&mixcomwd_timer); | 
|  | mixcomwd_timer_alive=0; | 
|  | } | 
|  | } | 
|  | release_region(watchdog_port,1); | 
|  | misc_deregister(&mixcomwd_miscdev); | 
|  | } | 
|  |  | 
|  | module_init(mixcomwd_init); | 
|  | module_exit(mixcomwd_exit); | 
|  |  | 
|  | MODULE_AUTHOR("Gergely Madarasz <gorgo@itc.hu>"); | 
|  | MODULE_DESCRIPTION("MixCom Watchdog driver"); | 
|  | MODULE_LICENSE("GPL"); | 
|  | MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); |