| /* |
| * P2020 DS Device Tree Source |
| * |
| * Copyright 2009 Freescale Semiconductor Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| */ |
| |
| /dts-v1/; |
| / { |
| model = "fsl,P2020"; |
| compatible = "fsl,P2020DS"; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| |
| aliases { |
| ethernet0 = &enet0; |
| ethernet1 = &enet1; |
| ethernet2 = &enet2; |
| serial0 = &serial0; |
| serial1 = &serial1; |
| pci0 = &pci0; |
| pci1 = &pci1; |
| pci2 = &pci2; |
| }; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| PowerPC,P2020@0 { |
| device_type = "cpu"; |
| reg = <0x0>; |
| next-level-cache = <&L2>; |
| }; |
| |
| PowerPC,P2020@1 { |
| device_type = "cpu"; |
| reg = <0x1>; |
| next-level-cache = <&L2>; |
| }; |
| }; |
| |
| memory { |
| device_type = "memory"; |
| }; |
| |
| localbus@ffe05000 { |
| #address-cells = <2>; |
| #size-cells = <1>; |
| compatible = "fsl,elbc", "simple-bus"; |
| reg = <0 0xffe05000 0 0x1000>; |
| interrupts = <19 2>; |
| interrupt-parent = <&mpic>; |
| |
| ranges = <0x0 0x0 0x0 0xe8000000 0x08000000 |
| 0x1 0x0 0x0 0xe0000000 0x08000000 |
| 0x2 0x0 0x0 0xffa00000 0x00040000 |
| 0x3 0x0 0x0 0xffdf0000 0x00008000 |
| 0x4 0x0 0x0 0xffa40000 0x00040000 |
| 0x5 0x0 0x0 0xffa80000 0x00040000 |
| 0x6 0x0 0x0 0xffac0000 0x00040000>; |
| |
| nor@0,0 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "cfi-flash"; |
| reg = <0x0 0x0 0x8000000>; |
| bank-width = <2>; |
| device-width = <1>; |
| |
| ramdisk@0 { |
| reg = <0x0 0x03000000>; |
| read-only; |
| }; |
| |
| diagnostic@3000000 { |
| reg = <0x03000000 0x00e00000>; |
| read-only; |
| }; |
| |
| dink@3e00000 { |
| reg = <0x03e00000 0x00200000>; |
| read-only; |
| }; |
| |
| kernel@4000000 { |
| reg = <0x04000000 0x00400000>; |
| read-only; |
| }; |
| |
| jffs2@4400000 { |
| reg = <0x04400000 0x03b00000>; |
| }; |
| |
| dtb@7f00000 { |
| reg = <0x07f00000 0x00080000>; |
| read-only; |
| }; |
| |
| u-boot@7f80000 { |
| reg = <0x07f80000 0x00080000>; |
| read-only; |
| }; |
| }; |
| |
| nand@2,0 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "fsl,elbc-fcm-nand"; |
| reg = <0x2 0x0 0x40000>; |
| |
| u-boot@0 { |
| reg = <0x0 0x02000000>; |
| read-only; |
| }; |
| |
| jffs2@2000000 { |
| reg = <0x02000000 0x10000000>; |
| }; |
| |
| ramdisk@12000000 { |
| reg = <0x12000000 0x08000000>; |
| read-only; |
| }; |
| |
| kernel@1a000000 { |
| reg = <0x1a000000 0x04000000>; |
| }; |
| |
| dtb@1e000000 { |
| reg = <0x1e000000 0x01000000>; |
| read-only; |
| }; |
| |
| empty@1f000000 { |
| reg = <0x1f000000 0x21000000>; |
| }; |
| }; |
| |
| nand@4,0 { |
| compatible = "fsl,elbc-fcm-nand"; |
| reg = <0x4 0x0 0x40000>; |
| }; |
| |
| nand@5,0 { |
| compatible = "fsl,elbc-fcm-nand"; |
| reg = <0x5 0x0 0x40000>; |
| }; |
| |
| nand@6,0 { |
| compatible = "fsl,elbc-fcm-nand"; |
| reg = <0x6 0x0 0x40000>; |
| }; |
| }; |
| |
| soc@ffe00000 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| device_type = "soc"; |
| compatible = "fsl,p2020-immr", "simple-bus"; |
| ranges = <0x0 0 0xffe00000 0x100000>; |
| bus-frequency = <0>; // Filled out by uboot. |
| |
| ecm-law@0 { |
| compatible = "fsl,ecm-law"; |
| reg = <0x0 0x1000>; |
| fsl,num-laws = <12>; |
| }; |
| |
| ecm@1000 { |
| compatible = "fsl,p2020-ecm", "fsl,ecm"; |
| reg = <0x1000 0x1000>; |
| interrupts = <17 2>; |
| interrupt-parent = <&mpic>; |
| }; |
| |
| memory-controller@2000 { |
| compatible = "fsl,p2020-memory-controller"; |
| reg = <0x2000 0x1000>; |
| interrupt-parent = <&mpic>; |
| interrupts = <18 2>; |
| }; |
| |
| i2c@3000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| cell-index = <0>; |
| compatible = "fsl-i2c"; |
| reg = <0x3000 0x100>; |
| interrupts = <43 2>; |
| interrupt-parent = <&mpic>; |
| dfsrr; |
| }; |
| |
| i2c@3100 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| cell-index = <1>; |
| compatible = "fsl-i2c"; |
| reg = <0x3100 0x100>; |
| interrupts = <43 2>; |
| interrupt-parent = <&mpic>; |
| dfsrr; |
| }; |
| |
| serial0: serial@4500 { |
| cell-index = <0>; |
| device_type = "serial"; |
| compatible = "ns16550"; |
| reg = <0x4500 0x100>; |
| clock-frequency = <0>; |
| interrupts = <42 2>; |
| interrupt-parent = <&mpic>; |
| }; |
| |
| serial1: serial@4600 { |
| cell-index = <1>; |
| device_type = "serial"; |
| compatible = "ns16550"; |
| reg = <0x4600 0x100>; |
| clock-frequency = <0>; |
| interrupts = <42 2>; |
| interrupt-parent = <&mpic>; |
| }; |
| |
| spi@7000 { |
| compatible = "fsl,espi"; |
| reg = <0x7000 0x1000>; |
| interrupts = <59 0x2>; |
| interrupt-parent = <&mpic>; |
| }; |
| |
| dma@c300 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "fsl,eloplus-dma"; |
| reg = <0xc300 0x4>; |
| ranges = <0x0 0xc100 0x200>; |
| cell-index = <1>; |
| dma-channel@0 { |
| compatible = "fsl,eloplus-dma-channel"; |
| reg = <0x0 0x80>; |
| cell-index = <0>; |
| interrupt-parent = <&mpic>; |
| interrupts = <76 2>; |
| }; |
| dma-channel@80 { |
| compatible = "fsl,eloplus-dma-channel"; |
| reg = <0x80 0x80>; |
| cell-index = <1>; |
| interrupt-parent = <&mpic>; |
| interrupts = <77 2>; |
| }; |
| dma-channel@100 { |
| compatible = "fsl,eloplus-dma-channel"; |
| reg = <0x100 0x80>; |
| cell-index = <2>; |
| interrupt-parent = <&mpic>; |
| interrupts = <78 2>; |
| }; |
| dma-channel@180 { |
| compatible = "fsl,eloplus-dma-channel"; |
| reg = <0x180 0x80>; |
| cell-index = <3>; |
| interrupt-parent = <&mpic>; |
| interrupts = <79 2>; |
| }; |
| }; |
| |
| gpio: gpio-controller@f000 { |
| #gpio-cells = <2>; |
| compatible = "fsl,mpc8572-gpio"; |
| reg = <0xf000 0x100>; |
| interrupts = <47 0x2>; |
| interrupt-parent = <&mpic>; |
| gpio-controller; |
| }; |
| |
| L2: l2-cache-controller@20000 { |
| compatible = "fsl,p2020-l2-cache-controller"; |
| reg = <0x20000 0x1000>; |
| cache-line-size = <32>; // 32 bytes |
| cache-size = <0x80000>; // L2, 512k |
| interrupt-parent = <&mpic>; |
| interrupts = <16 2>; |
| }; |
| |
| dma@21300 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "fsl,eloplus-dma"; |
| reg = <0x21300 0x4>; |
| ranges = <0x0 0x21100 0x200>; |
| cell-index = <0>; |
| dma-channel@0 { |
| compatible = "fsl,eloplus-dma-channel"; |
| reg = <0x0 0x80>; |
| cell-index = <0>; |
| interrupt-parent = <&mpic>; |
| interrupts = <20 2>; |
| }; |
| dma-channel@80 { |
| compatible = "fsl,eloplus-dma-channel"; |
| reg = <0x80 0x80>; |
| cell-index = <1>; |
| interrupt-parent = <&mpic>; |
| interrupts = <21 2>; |
| }; |
| dma-channel@100 { |
| compatible = "fsl,eloplus-dma-channel"; |
| reg = <0x100 0x80>; |
| cell-index = <2>; |
| interrupt-parent = <&mpic>; |
| interrupts = <22 2>; |
| }; |
| dma-channel@180 { |
| compatible = "fsl,eloplus-dma-channel"; |
| reg = <0x180 0x80>; |
| cell-index = <3>; |
| interrupt-parent = <&mpic>; |
| interrupts = <23 2>; |
| }; |
| }; |
| |
| usb@22000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl-usb2-dr"; |
| reg = <0x22000 0x1000>; |
| interrupt-parent = <&mpic>; |
| interrupts = <28 0x2>; |
| phy_type = "ulpi"; |
| }; |
| |
| enet0: ethernet@24000 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| cell-index = <0>; |
| device_type = "network"; |
| model = "eTSEC"; |
| compatible = "gianfar"; |
| reg = <0x24000 0x1000>; |
| ranges = <0x0 0x24000 0x1000>; |
| local-mac-address = [ 00 00 00 00 00 00 ]; |
| interrupts = <29 2 30 2 34 2>; |
| interrupt-parent = <&mpic>; |
| tbi-handle = <&tbi0>; |
| phy-handle = <&phy0>; |
| phy-connection-type = "rgmii-id"; |
| |
| mdio@520 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,gianfar-mdio"; |
| reg = <0x520 0x20>; |
| |
| phy0: ethernet-phy@0 { |
| interrupt-parent = <&mpic>; |
| interrupts = <3 1>; |
| reg = <0x0>; |
| }; |
| phy1: ethernet-phy@1 { |
| interrupt-parent = <&mpic>; |
| interrupts = <3 1>; |
| reg = <0x1>; |
| }; |
| phy2: ethernet-phy@2 { |
| interrupt-parent = <&mpic>; |
| interrupts = <3 1>; |
| reg = <0x2>; |
| }; |
| tbi0: tbi-phy@11 { |
| reg = <0x11>; |
| device_type = "tbi-phy"; |
| }; |
| }; |
| }; |
| |
| enet1: ethernet@25000 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| cell-index = <1>; |
| device_type = "network"; |
| model = "eTSEC"; |
| compatible = "gianfar"; |
| reg = <0x25000 0x1000>; |
| ranges = <0x0 0x25000 0x1000>; |
| local-mac-address = [ 00 00 00 00 00 00 ]; |
| interrupts = <35 2 36 2 40 2>; |
| interrupt-parent = <&mpic>; |
| tbi-handle = <&tbi1>; |
| phy-handle = <&phy1>; |
| phy-connection-type = "rgmii-id"; |
| |
| mdio@520 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,gianfar-tbi"; |
| reg = <0x520 0x20>; |
| |
| tbi1: tbi-phy@11 { |
| reg = <0x11>; |
| device_type = "tbi-phy"; |
| }; |
| }; |
| }; |
| |
| enet2: ethernet@26000 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| cell-index = <2>; |
| device_type = "network"; |
| model = "eTSEC"; |
| compatible = "gianfar"; |
| reg = <0x26000 0x1000>; |
| ranges = <0x0 0x26000 0x1000>; |
| local-mac-address = [ 00 00 00 00 00 00 ]; |
| interrupts = <31 2 32 2 33 2>; |
| interrupt-parent = <&mpic>; |
| tbi-handle = <&tbi2>; |
| phy-handle = <&phy2>; |
| phy-connection-type = "rgmii-id"; |
| |
| mdio@520 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,gianfar-tbi"; |
| reg = <0x520 0x20>; |
| |
| tbi2: tbi-phy@11 { |
| reg = <0x11>; |
| device_type = "tbi-phy"; |
| }; |
| }; |
| }; |
| |
| sdhci@2e000 { |
| compatible = "fsl,p2020-esdhc", "fsl,esdhc"; |
| reg = <0x2e000 0x1000>; |
| interrupts = <72 0x2>; |
| interrupt-parent = <&mpic>; |
| /* Filled in by U-Boot */ |
| clock-frequency = <0>; |
| }; |
| |
| crypto@30000 { |
| compatible = "fsl,sec3.1", "fsl,sec3.0", "fsl,sec2.4", |
| "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0"; |
| reg = <0x30000 0x10000>; |
| interrupts = <45 2 58 2>; |
| interrupt-parent = <&mpic>; |
| fsl,num-channels = <4>; |
| fsl,channel-fifo-len = <24>; |
| fsl,exec-units-mask = <0xbfe>; |
| fsl,descriptor-types-mask = <0x3ab0ebf>; |
| }; |
| |
| mpic: pic@40000 { |
| interrupt-controller; |
| #address-cells = <0>; |
| #interrupt-cells = <2>; |
| reg = <0x40000 0x40000>; |
| compatible = "chrp,open-pic"; |
| device_type = "open-pic"; |
| }; |
| |
| msi@41600 { |
| compatible = "fsl,mpic-msi"; |
| reg = <0x41600 0x80>; |
| msi-available-ranges = <0 0x100>; |
| interrupts = < |
| 0xe0 0 |
| 0xe1 0 |
| 0xe2 0 |
| 0xe3 0 |
| 0xe4 0 |
| 0xe5 0 |
| 0xe6 0 |
| 0xe7 0>; |
| interrupt-parent = <&mpic>; |
| }; |
| |
| global-utilities@e0000 { //global utilities block |
| compatible = "fsl,p2020-guts"; |
| reg = <0xe0000 0x1000>; |
| fsl,has-rstcr; |
| }; |
| }; |
| |
| pci0: pcie@ffe08000 { |
| compatible = "fsl,mpc8548-pcie"; |
| device_type = "pci"; |
| #interrupt-cells = <1>; |
| #size-cells = <2>; |
| #address-cells = <3>; |
| reg = <0 0xffe08000 0 0x1000>; |
| bus-range = <0 255>; |
| ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000 |
| 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>; |
| clock-frequency = <33333333>; |
| interrupt-parent = <&mpic>; |
| interrupts = <24 2>; |
| interrupt-map-mask = <0xf800 0x0 0x0 0x7>; |
| interrupt-map = < |
| /* IDSEL 0x0 */ |
| 0000 0x0 0x0 0x1 &mpic 0x8 0x1 |
| 0000 0x0 0x0 0x2 &mpic 0x9 0x1 |
| 0000 0x0 0x0 0x3 &mpic 0xa 0x1 |
| 0000 0x0 0x0 0x4 &mpic 0xb 0x1 |
| >; |
| pcie@0 { |
| reg = <0x0 0x0 0x0 0x0 0x0>; |
| #size-cells = <2>; |
| #address-cells = <3>; |
| device_type = "pci"; |
| ranges = <0x2000000 0x0 0x80000000 |
| 0x2000000 0x0 0x80000000 |
| 0x0 0x20000000 |
| |
| 0x1000000 0x0 0x0 |
| 0x1000000 0x0 0x0 |
| 0x0 0x10000>; |
| }; |
| }; |
| |
| pci1: pcie@ffe09000 { |
| compatible = "fsl,mpc8548-pcie"; |
| device_type = "pci"; |
| #interrupt-cells = <1>; |
| #size-cells = <2>; |
| #address-cells = <3>; |
| reg = <0 0xffe09000 0 0x1000>; |
| bus-range = <0 255>; |
| ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 |
| 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; |
| clock-frequency = <33333333>; |
| interrupt-parent = <&mpic>; |
| interrupts = <25 2>; |
| interrupt-map-mask = <0xff00 0x0 0x0 0x7>; |
| interrupt-map = < |
| |
| // IDSEL 0x11 func 0 - PCI slot 1 |
| 0x8800 0x0 0x0 0x1 &i8259 0x9 0x2 |
| 0x8800 0x0 0x0 0x2 &i8259 0xa 0x2 |
| |
| // IDSEL 0x11 func 1 - PCI slot 1 |
| 0x8900 0x0 0x0 0x1 &i8259 0x9 0x2 |
| 0x8900 0x0 0x0 0x2 &i8259 0xa 0x2 |
| |
| // IDSEL 0x11 func 2 - PCI slot 1 |
| 0x8a00 0x0 0x0 0x1 &i8259 0x9 0x2 |
| 0x8a00 0x0 0x0 0x2 &i8259 0xa 0x2 |
| |
| // IDSEL 0x11 func 3 - PCI slot 1 |
| 0x8b00 0x0 0x0 0x1 &i8259 0x9 0x2 |
| 0x8b00 0x0 0x0 0x2 &i8259 0xa 0x2 |
| |
| // IDSEL 0x11 func 4 - PCI slot 1 |
| 0x8c00 0x0 0x0 0x1 &i8259 0x9 0x2 |
| 0x8c00 0x0 0x0 0x2 &i8259 0xa 0x2 |
| |
| // IDSEL 0x11 func 5 - PCI slot 1 |
| 0x8d00 0x0 0x0 0x1 &i8259 0x9 0x2 |
| 0x8d00 0x0 0x0 0x2 &i8259 0xa 0x2 |
| |
| // IDSEL 0x11 func 6 - PCI slot 1 |
| 0x8e00 0x0 0x0 0x1 &i8259 0x9 0x2 |
| 0x8e00 0x0 0x0 0x2 &i8259 0xa 0x2 |
| |
| // IDSEL 0x11 func 7 - PCI slot 1 |
| 0x8f00 0x0 0x0 0x1 &i8259 0x9 0x2 |
| 0x8f00 0x0 0x0 0x2 &i8259 0xa 0x2 |
| |
| // IDSEL 0x1d Audio |
| 0xe800 0x0 0x0 0x1 &i8259 0x6 0x2 |
| |
| // IDSEL 0x1e Legacy |
| 0xf000 0x0 0x0 0x1 &i8259 0x7 0x2 |
| 0xf100 0x0 0x0 0x1 &i8259 0x7 0x2 |
| |
| // IDSEL 0x1f IDE/SATA |
| 0xf800 0x0 0x0 0x1 &i8259 0xe 0x2 |
| 0xf900 0x0 0x0 0x1 &i8259 0x5 0x2 |
| >; |
| |
| pcie@0 { |
| reg = <0x0 0x0 0x0 0x0 0x0>; |
| #size-cells = <2>; |
| #address-cells = <3>; |
| device_type = "pci"; |
| ranges = <0x2000000 0x0 0xa0000000 |
| 0x2000000 0x0 0xa0000000 |
| 0x0 0x20000000 |
| |
| 0x1000000 0x0 0x0 |
| 0x1000000 0x0 0x0 |
| 0x0 0x10000>; |
| uli1575@0 { |
| reg = <0x0 0x0 0x0 0x0 0x0>; |
| #size-cells = <2>; |
| #address-cells = <3>; |
| ranges = <0x2000000 0x0 0xa0000000 |
| 0x2000000 0x0 0xa0000000 |
| 0x0 0x20000000 |
| |
| 0x1000000 0x0 0x0 |
| 0x1000000 0x0 0x0 |
| 0x0 0x10000>; |
| isa@1e { |
| device_type = "isa"; |
| #interrupt-cells = <2>; |
| #size-cells = <1>; |
| #address-cells = <2>; |
| reg = <0xf000 0x0 0x0 0x0 0x0>; |
| ranges = <0x1 0x0 0x1000000 0x0 0x0 |
| 0x1000>; |
| interrupt-parent = <&i8259>; |
| |
| i8259: interrupt-controller@20 { |
| reg = <0x1 0x20 0x2 |
| 0x1 0xa0 0x2 |
| 0x1 0x4d0 0x2>; |
| interrupt-controller; |
| device_type = "interrupt-controller"; |
| #address-cells = <0>; |
| #interrupt-cells = <2>; |
| compatible = "chrp,iic"; |
| interrupts = <4 1>; |
| interrupt-parent = <&mpic>; |
| }; |
| |
| i8042@60 { |
| #size-cells = <0>; |
| #address-cells = <1>; |
| reg = <0x1 0x60 0x1 0x1 0x64 0x1>; |
| interrupts = <1 3 12 3>; |
| interrupt-parent = |
| <&i8259>; |
| |
| keyboard@0 { |
| reg = <0x0>; |
| compatible = "pnpPNP,303"; |
| }; |
| |
| mouse@1 { |
| reg = <0x1>; |
| compatible = "pnpPNP,f03"; |
| }; |
| }; |
| |
| rtc@70 { |
| compatible = "pnpPNP,b00"; |
| reg = <0x1 0x70 0x2>; |
| }; |
| |
| gpio@400 { |
| reg = <0x1 0x400 0x80>; |
| }; |
| }; |
| }; |
| }; |
| |
| }; |
| |
| pci2: pcie@ffe0a000 { |
| compatible = "fsl,mpc8548-pcie"; |
| device_type = "pci"; |
| #interrupt-cells = <1>; |
| #size-cells = <2>; |
| #address-cells = <3>; |
| reg = <0 0xffe0a000 0 0x1000>; |
| bus-range = <0 255>; |
| ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000 |
| 0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>; |
| clock-frequency = <33333333>; |
| interrupt-parent = <&mpic>; |
| interrupts = <26 2>; |
| interrupt-map-mask = <0xf800 0x0 0x0 0x7>; |
| interrupt-map = < |
| /* IDSEL 0x0 */ |
| 0000 0x0 0x0 0x1 &mpic 0x0 0x1 |
| 0000 0x0 0x0 0x2 &mpic 0x1 0x1 |
| 0000 0x0 0x0 0x3 &mpic 0x2 0x1 |
| 0000 0x0 0x0 0x4 &mpic 0x3 0x1 |
| >; |
| pcie@0 { |
| reg = <0x0 0x0 0x0 0x0 0x0>; |
| #size-cells = <2>; |
| #address-cells = <3>; |
| device_type = "pci"; |
| ranges = <0x2000000 0x0 0xc0000000 |
| 0x2000000 0x0 0xc0000000 |
| 0x0 0x20000000 |
| |
| 0x1000000 0x0 0x0 |
| 0x1000000 0x0 0x0 |
| 0x0 0x10000>; |
| }; |
| }; |
| }; |