| /* | 
 |  *  eepc-laptop.c - Asus Eee PC extras | 
 |  * | 
 |  *  Based on asus_acpi.c as patched for the Eee PC by Asus: | 
 |  *  ftp://ftp.asus.com/pub/ASUS/EeePC/701/ASUS_ACPI_071126.rar | 
 |  *  Based on eee.c from eeepc-linux | 
 |  * | 
 |  *  This program is free software; you can redistribute it and/or modify | 
 |  *  it under the terms of the GNU General Public License as published by | 
 |  *  the Free Software Foundation; either version 2 of the License, or | 
 |  *  (at your option) any later version. | 
 |  * | 
 |  *  This program is distributed in the hope that it will be useful, | 
 |  *  but WITHOUT ANY WARRANTY; without even the implied warranty of | 
 |  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
 |  *  GNU General Public License for more details. | 
 |  */ | 
 |  | 
 | #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt | 
 |  | 
 | #include <linux/kernel.h> | 
 | #include <linux/module.h> | 
 | #include <linux/init.h> | 
 | #include <linux/types.h> | 
 | #include <linux/platform_device.h> | 
 | #include <linux/backlight.h> | 
 | #include <linux/fb.h> | 
 | #include <linux/hwmon.h> | 
 | #include <linux/hwmon-sysfs.h> | 
 | #include <acpi/acpi_drivers.h> | 
 | #include <acpi/acpi_bus.h> | 
 | #include <linux/uaccess.h> | 
 | #include <linux/input.h> | 
 | #include <linux/rfkill.h> | 
 | #include <linux/pci.h> | 
 | #include <linux/pci_hotplug.h> | 
 |  | 
 | #define EEEPC_LAPTOP_VERSION	"0.1" | 
 |  | 
 | #define EEEPC_HOTK_NAME		"Eee PC Hotkey Driver" | 
 | #define EEEPC_HOTK_FILE		"eeepc" | 
 | #define EEEPC_HOTK_CLASS	"hotkey" | 
 | #define EEEPC_HOTK_DEVICE_NAME	"Hotkey" | 
 | #define EEEPC_HOTK_HID		"ASUS010" | 
 |  | 
 |  | 
 | /* | 
 |  * Definitions for Asus EeePC | 
 |  */ | 
 | #define	NOTIFY_WLAN_ON	0x10 | 
 | #define NOTIFY_BRN_MIN	0x20 | 
 | #define NOTIFY_BRN_MAX	0x2f | 
 |  | 
 | enum { | 
 | 	DISABLE_ASL_WLAN = 0x0001, | 
 | 	DISABLE_ASL_BLUETOOTH = 0x0002, | 
 | 	DISABLE_ASL_IRDA = 0x0004, | 
 | 	DISABLE_ASL_CAMERA = 0x0008, | 
 | 	DISABLE_ASL_TV = 0x0010, | 
 | 	DISABLE_ASL_GPS = 0x0020, | 
 | 	DISABLE_ASL_DISPLAYSWITCH = 0x0040, | 
 | 	DISABLE_ASL_MODEM = 0x0080, | 
 | 	DISABLE_ASL_CARDREADER = 0x0100, | 
 | 	DISABLE_ASL_3G = 0x0200, | 
 | 	DISABLE_ASL_WIMAX = 0x0400, | 
 | 	DISABLE_ASL_HWCF = 0x0800 | 
 | }; | 
 |  | 
 | enum { | 
 | 	CM_ASL_WLAN = 0, | 
 | 	CM_ASL_BLUETOOTH, | 
 | 	CM_ASL_IRDA, | 
 | 	CM_ASL_1394, | 
 | 	CM_ASL_CAMERA, | 
 | 	CM_ASL_TV, | 
 | 	CM_ASL_GPS, | 
 | 	CM_ASL_DVDROM, | 
 | 	CM_ASL_DISPLAYSWITCH, | 
 | 	CM_ASL_PANELBRIGHT, | 
 | 	CM_ASL_BIOSFLASH, | 
 | 	CM_ASL_ACPIFLASH, | 
 | 	CM_ASL_CPUFV, | 
 | 	CM_ASL_CPUTEMPERATURE, | 
 | 	CM_ASL_FANCPU, | 
 | 	CM_ASL_FANCHASSIS, | 
 | 	CM_ASL_USBPORT1, | 
 | 	CM_ASL_USBPORT2, | 
 | 	CM_ASL_USBPORT3, | 
 | 	CM_ASL_MODEM, | 
 | 	CM_ASL_CARDREADER, | 
 | 	CM_ASL_3G, | 
 | 	CM_ASL_WIMAX, | 
 | 	CM_ASL_HWCF, | 
 | 	CM_ASL_LID, | 
 | 	CM_ASL_TYPE, | 
 | 	CM_ASL_PANELPOWER,	/*P901*/ | 
 | 	CM_ASL_TPD | 
 | }; | 
 |  | 
 | static const char *cm_getv[] = { | 
 | 	"WLDG", "BTHG", NULL, NULL, | 
 | 	"CAMG", NULL, NULL, NULL, | 
 | 	NULL, "PBLG", NULL, NULL, | 
 | 	"CFVG", NULL, NULL, NULL, | 
 | 	"USBG", NULL, NULL, "MODG", | 
 | 	"CRDG", "M3GG", "WIMG", "HWCF", | 
 | 	"LIDG",	"TYPE", "PBPG",	"TPDG" | 
 | }; | 
 |  | 
 | static const char *cm_setv[] = { | 
 | 	"WLDS", "BTHS", NULL, NULL, | 
 | 	"CAMS", NULL, NULL, NULL, | 
 | 	"SDSP", "PBLS", "HDPS", NULL, | 
 | 	"CFVS", NULL, NULL, NULL, | 
 | 	"USBG", NULL, NULL, "MODS", | 
 | 	"CRDS", "M3GS", "WIMS", NULL, | 
 | 	NULL, NULL, "PBPS", "TPDS" | 
 | }; | 
 |  | 
 | #define EEEPC_EC	"\\_SB.PCI0.SBRG.EC0." | 
 |  | 
 | #define EEEPC_EC_FAN_PWM	EEEPC_EC "SC02" /* Fan PWM duty cycle (%) */ | 
 | #define EEEPC_EC_SC02		0x63 | 
 | #define EEEPC_EC_FAN_HRPM	EEEPC_EC "SC05" /* High byte, fan speed (RPM) */ | 
 | #define EEEPC_EC_FAN_LRPM	EEEPC_EC "SC06" /* Low byte, fan speed (RPM) */ | 
 | #define EEEPC_EC_FAN_CTRL	EEEPC_EC "SFB3" /* Byte containing SF25  */ | 
 | #define EEEPC_EC_SFB3		0xD3 | 
 |  | 
 | /* | 
 |  * This is the main structure, we can use it to store useful information | 
 |  * about the hotk device | 
 |  */ | 
 | struct eeepc_hotk { | 
 | 	struct acpi_device *device;	/* the device we are in */ | 
 | 	acpi_handle handle;		/* the handle of the hotk device */ | 
 | 	u32 cm_supported;		/* the control methods supported | 
 | 					   by this BIOS */ | 
 | 	uint init_flag;			/* Init flags */ | 
 | 	u16 event_count[128];		/* count for each event */ | 
 | 	struct input_dev *inputdev; | 
 | 	u16 *keycode_map; | 
 | 	struct rfkill *wlan_rfkill; | 
 | 	struct rfkill *bluetooth_rfkill; | 
 | 	struct rfkill *wwan3g_rfkill; | 
 | 	struct hotplug_slot *hotplug_slot; | 
 | 	struct work_struct hotplug_work; | 
 | }; | 
 |  | 
 | /* The actual device the driver binds to */ | 
 | static struct eeepc_hotk *ehotk; | 
 |  | 
 | /* Platform device/driver */ | 
 | static struct platform_driver platform_driver = { | 
 | 	.driver = { | 
 | 		.name = EEEPC_HOTK_FILE, | 
 | 		.owner = THIS_MODULE, | 
 | 	} | 
 | }; | 
 |  | 
 | static struct platform_device *platform_device; | 
 |  | 
 | struct key_entry { | 
 | 	char type; | 
 | 	u8 code; | 
 | 	u16 keycode; | 
 | }; | 
 |  | 
 | enum { KE_KEY, KE_END }; | 
 |  | 
 | static struct key_entry eeepc_keymap[] = { | 
 | 	/* Sleep already handled via generic ACPI code */ | 
 | 	{KE_KEY, 0x10, KEY_WLAN }, | 
 | 	{KE_KEY, 0x11, KEY_WLAN }, | 
 | 	{KE_KEY, 0x12, KEY_PROG1 }, | 
 | 	{KE_KEY, 0x13, KEY_MUTE }, | 
 | 	{KE_KEY, 0x14, KEY_VOLUMEDOWN }, | 
 | 	{KE_KEY, 0x15, KEY_VOLUMEUP }, | 
 | 	{KE_KEY, 0x1a, KEY_COFFEE }, | 
 | 	{KE_KEY, 0x1b, KEY_ZOOM }, | 
 | 	{KE_KEY, 0x1c, KEY_PROG2 }, | 
 | 	{KE_KEY, 0x1d, KEY_PROG3 }, | 
 | 	{KE_KEY, NOTIFY_BRN_MIN,     KEY_BRIGHTNESSDOWN }, | 
 | 	{KE_KEY, NOTIFY_BRN_MIN + 2, KEY_BRIGHTNESSUP }, | 
 | 	{KE_KEY, 0x30, KEY_SWITCHVIDEOMODE }, | 
 | 	{KE_KEY, 0x31, KEY_SWITCHVIDEOMODE }, | 
 | 	{KE_KEY, 0x32, KEY_SWITCHVIDEOMODE }, | 
 | 	{KE_END, 0}, | 
 | }; | 
 |  | 
 | /* | 
 |  * The hotkey driver declaration | 
 |  */ | 
 | static int eeepc_hotk_add(struct acpi_device *device); | 
 | static int eeepc_hotk_remove(struct acpi_device *device, int type); | 
 | static int eeepc_hotk_resume(struct acpi_device *device); | 
 | static void eeepc_hotk_notify(struct acpi_device *device, u32 event); | 
 |  | 
 | static const struct acpi_device_id eeepc_device_ids[] = { | 
 | 	{EEEPC_HOTK_HID, 0}, | 
 | 	{"", 0}, | 
 | }; | 
 | MODULE_DEVICE_TABLE(acpi, eeepc_device_ids); | 
 |  | 
 | static struct acpi_driver eeepc_hotk_driver = { | 
 | 	.name = EEEPC_HOTK_NAME, | 
 | 	.class = EEEPC_HOTK_CLASS, | 
 | 	.ids = eeepc_device_ids, | 
 | 	.flags = ACPI_DRIVER_ALL_NOTIFY_EVENTS, | 
 | 	.ops = { | 
 | 		.add = eeepc_hotk_add, | 
 | 		.remove = eeepc_hotk_remove, | 
 | 		.resume = eeepc_hotk_resume, | 
 | 		.notify = eeepc_hotk_notify, | 
 | 	}, | 
 | }; | 
 |  | 
 | /* PCI hotplug ops */ | 
 | static int eeepc_get_adapter_status(struct hotplug_slot *slot, u8 *value); | 
 |  | 
 | static struct hotplug_slot_ops eeepc_hotplug_slot_ops = { | 
 | 	.owner = THIS_MODULE, | 
 | 	.get_adapter_status = eeepc_get_adapter_status, | 
 | 	.get_power_status = eeepc_get_adapter_status, | 
 | }; | 
 |  | 
 | /* The backlight device /sys/class/backlight */ | 
 | static struct backlight_device *eeepc_backlight_device; | 
 |  | 
 | /* The hwmon device */ | 
 | static struct device *eeepc_hwmon_device; | 
 |  | 
 | /* | 
 |  * The backlight class declaration | 
 |  */ | 
 | static int read_brightness(struct backlight_device *bd); | 
 | static int update_bl_status(struct backlight_device *bd); | 
 | static struct backlight_ops eeepcbl_ops = { | 
 | 	.get_brightness = read_brightness, | 
 | 	.update_status = update_bl_status, | 
 | }; | 
 |  | 
 | MODULE_AUTHOR("Corentin Chary, Eric Cooper"); | 
 | MODULE_DESCRIPTION(EEEPC_HOTK_NAME); | 
 | MODULE_LICENSE("GPL"); | 
 |  | 
 | /* | 
 |  * ACPI Helpers | 
 |  */ | 
 | static int write_acpi_int(acpi_handle handle, const char *method, int val, | 
 | 			  struct acpi_buffer *output) | 
 | { | 
 | 	struct acpi_object_list params; | 
 | 	union acpi_object in_obj; | 
 | 	acpi_status status; | 
 |  | 
 | 	params.count = 1; | 
 | 	params.pointer = &in_obj; | 
 | 	in_obj.type = ACPI_TYPE_INTEGER; | 
 | 	in_obj.integer.value = val; | 
 |  | 
 | 	status = acpi_evaluate_object(handle, (char *)method, ¶ms, output); | 
 | 	return (status == AE_OK ? 0 : -1); | 
 | } | 
 |  | 
 | static int read_acpi_int(acpi_handle handle, const char *method, int *val) | 
 | { | 
 | 	acpi_status status; | 
 | 	unsigned long long result; | 
 |  | 
 | 	status = acpi_evaluate_integer(handle, (char *)method, NULL, &result); | 
 | 	if (ACPI_FAILURE(status)) { | 
 | 		*val = -1; | 
 | 		return -1; | 
 | 	} else { | 
 | 		*val = result; | 
 | 		return 0; | 
 | 	} | 
 | } | 
 |  | 
 | static int set_acpi(int cm, int value) | 
 | { | 
 | 	if (ehotk->cm_supported & (0x1 << cm)) { | 
 | 		const char *method = cm_setv[cm]; | 
 | 		if (method == NULL) | 
 | 			return -ENODEV; | 
 | 		if (write_acpi_int(ehotk->handle, method, value, NULL)) | 
 | 			pr_warning("Error writing %s\n", method); | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int get_acpi(int cm) | 
 | { | 
 | 	int value = -ENODEV; | 
 | 	if ((ehotk->cm_supported & (0x1 << cm))) { | 
 | 		const char *method = cm_getv[cm]; | 
 | 		if (method == NULL) | 
 | 			return -ENODEV; | 
 | 		if (read_acpi_int(ehotk->handle, method, &value)) | 
 | 			pr_warning("Error reading %s\n", method); | 
 | 	} | 
 | 	return value; | 
 | } | 
 |  | 
 | /* | 
 |  * Backlight | 
 |  */ | 
 | static int read_brightness(struct backlight_device *bd) | 
 | { | 
 | 	return get_acpi(CM_ASL_PANELBRIGHT); | 
 | } | 
 |  | 
 | static int set_brightness(struct backlight_device *bd, int value) | 
 | { | 
 | 	value = max(0, min(15, value)); | 
 | 	return set_acpi(CM_ASL_PANELBRIGHT, value); | 
 | } | 
 |  | 
 | static int update_bl_status(struct backlight_device *bd) | 
 | { | 
 | 	return set_brightness(bd, bd->props.brightness); | 
 | } | 
 |  | 
 | /* | 
 |  * Rfkill helpers | 
 |  */ | 
 |  | 
 | static bool eeepc_wlan_rfkill_blocked(void) | 
 | { | 
 | 	if (get_acpi(CM_ASL_WLAN) == 1) | 
 | 		return false; | 
 | 	return true; | 
 | } | 
 |  | 
 | static int eeepc_rfkill_set(void *data, bool blocked) | 
 | { | 
 | 	unsigned long asl = (unsigned long)data; | 
 | 	return set_acpi(asl, !blocked); | 
 | } | 
 |  | 
 | static const struct rfkill_ops eeepc_rfkill_ops = { | 
 | 	.set_block = eeepc_rfkill_set, | 
 | }; | 
 |  | 
 | static void __init eeepc_enable_camera(void) | 
 | { | 
 | 	/* | 
 | 	 * If the following call to set_acpi() fails, it's because there's no | 
 | 	 * camera so we can ignore the error. | 
 | 	 */ | 
 | 	set_acpi(CM_ASL_CAMERA, 1); | 
 | } | 
 |  | 
 | /* | 
 |  * Sys helpers | 
 |  */ | 
 | static int parse_arg(const char *buf, unsigned long count, int *val) | 
 | { | 
 | 	if (!count) | 
 | 		return 0; | 
 | 	if (sscanf(buf, "%i", val) != 1) | 
 | 		return -EINVAL; | 
 | 	return count; | 
 | } | 
 |  | 
 | static ssize_t store_sys_acpi(int cm, const char *buf, size_t count) | 
 | { | 
 | 	int rv, value; | 
 |  | 
 | 	rv = parse_arg(buf, count, &value); | 
 | 	if (rv > 0) | 
 | 		value = set_acpi(cm, value); | 
 | 	if (value < 0) | 
 | 		return value; | 
 | 	return rv; | 
 | } | 
 |  | 
 | static ssize_t show_sys_acpi(int cm, char *buf) | 
 | { | 
 | 	int value = get_acpi(cm); | 
 |  | 
 | 	if (value < 0) | 
 | 		return value; | 
 | 	return sprintf(buf, "%d\n", value); | 
 | } | 
 |  | 
 | #define EEEPC_CREATE_DEVICE_ATTR(_name, _cm)				\ | 
 | 	static ssize_t show_##_name(struct device *dev,			\ | 
 | 				    struct device_attribute *attr,	\ | 
 | 				    char *buf)				\ | 
 | 	{								\ | 
 | 		return show_sys_acpi(_cm, buf);				\ | 
 | 	}								\ | 
 | 	static ssize_t store_##_name(struct device *dev,		\ | 
 | 				     struct device_attribute *attr,	\ | 
 | 				     const char *buf, size_t count)	\ | 
 | 	{								\ | 
 | 		return store_sys_acpi(_cm, buf, count);			\ | 
 | 	}								\ | 
 | 	static struct device_attribute dev_attr_##_name = {		\ | 
 | 		.attr = {						\ | 
 | 			.name = __stringify(_name),			\ | 
 | 			.mode = 0644 },					\ | 
 | 		.show   = show_##_name,					\ | 
 | 		.store  = store_##_name,				\ | 
 | 	} | 
 |  | 
 | EEEPC_CREATE_DEVICE_ATTR(camera, CM_ASL_CAMERA); | 
 | EEEPC_CREATE_DEVICE_ATTR(cardr, CM_ASL_CARDREADER); | 
 | EEEPC_CREATE_DEVICE_ATTR(disp, CM_ASL_DISPLAYSWITCH); | 
 |  | 
 | struct eeepc_cpufv { | 
 | 	int num; | 
 | 	int cur; | 
 | }; | 
 |  | 
 | static int get_cpufv(struct eeepc_cpufv *c) | 
 | { | 
 | 	c->cur = get_acpi(CM_ASL_CPUFV); | 
 | 	c->num = (c->cur >> 8) & 0xff; | 
 | 	c->cur &= 0xff; | 
 | 	if (c->cur < 0 || c->num <= 0 || c->num > 12) | 
 | 		return -ENODEV; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static ssize_t show_available_cpufv(struct device *dev, | 
 | 				    struct device_attribute *attr, | 
 | 				    char *buf) | 
 | { | 
 | 	struct eeepc_cpufv c; | 
 | 	int i; | 
 | 	ssize_t len = 0; | 
 |  | 
 | 	if (get_cpufv(&c)) | 
 | 		return -ENODEV; | 
 | 	for (i = 0; i < c.num; i++) | 
 | 		len += sprintf(buf + len, "%d ", i); | 
 | 	len += sprintf(buf + len, "\n"); | 
 | 	return len; | 
 | } | 
 |  | 
 | static ssize_t show_cpufv(struct device *dev, | 
 | 			  struct device_attribute *attr, | 
 | 			  char *buf) | 
 | { | 
 | 	struct eeepc_cpufv c; | 
 |  | 
 | 	if (get_cpufv(&c)) | 
 | 		return -ENODEV; | 
 | 	return sprintf(buf, "%#x\n", (c.num << 8) | c.cur); | 
 | } | 
 |  | 
 | static ssize_t store_cpufv(struct device *dev, | 
 | 			   struct device_attribute *attr, | 
 | 			   const char *buf, size_t count) | 
 | { | 
 | 	struct eeepc_cpufv c; | 
 | 	int rv, value; | 
 |  | 
 | 	if (get_cpufv(&c)) | 
 | 		return -ENODEV; | 
 | 	rv = parse_arg(buf, count, &value); | 
 | 	if (rv < 0) | 
 | 		return rv; | 
 | 	if (!rv || value < 0 || value >= c.num) | 
 | 		return -EINVAL; | 
 | 	set_acpi(CM_ASL_CPUFV, value); | 
 | 	return rv; | 
 | } | 
 |  | 
 | static struct device_attribute dev_attr_cpufv = { | 
 | 	.attr = { | 
 | 		.name = "cpufv", | 
 | 		.mode = 0644 }, | 
 | 	.show   = show_cpufv, | 
 | 	.store  = store_cpufv | 
 | }; | 
 |  | 
 | static struct device_attribute dev_attr_available_cpufv = { | 
 | 	.attr = { | 
 | 		.name = "available_cpufv", | 
 | 		.mode = 0444 }, | 
 | 	.show   = show_available_cpufv | 
 | }; | 
 |  | 
 | static struct attribute *platform_attributes[] = { | 
 | 	&dev_attr_camera.attr, | 
 | 	&dev_attr_cardr.attr, | 
 | 	&dev_attr_disp.attr, | 
 | 	&dev_attr_cpufv.attr, | 
 | 	&dev_attr_available_cpufv.attr, | 
 | 	NULL | 
 | }; | 
 |  | 
 | static struct attribute_group platform_attribute_group = { | 
 | 	.attrs = platform_attributes | 
 | }; | 
 |  | 
 | /* | 
 |  * Hotkey functions | 
 |  */ | 
 | static struct key_entry *eepc_get_entry_by_scancode(int code) | 
 | { | 
 | 	struct key_entry *key; | 
 |  | 
 | 	for (key = eeepc_keymap; key->type != KE_END; key++) | 
 | 		if (code == key->code) | 
 | 			return key; | 
 |  | 
 | 	return NULL; | 
 | } | 
 |  | 
 | static struct key_entry *eepc_get_entry_by_keycode(int code) | 
 | { | 
 | 	struct key_entry *key; | 
 |  | 
 | 	for (key = eeepc_keymap; key->type != KE_END; key++) | 
 | 		if (code == key->keycode && key->type == KE_KEY) | 
 | 			return key; | 
 |  | 
 | 	return NULL; | 
 | } | 
 |  | 
 | static int eeepc_getkeycode(struct input_dev *dev, int scancode, int *keycode) | 
 | { | 
 | 	struct key_entry *key = eepc_get_entry_by_scancode(scancode); | 
 |  | 
 | 	if (key && key->type == KE_KEY) { | 
 | 		*keycode = key->keycode; | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	return -EINVAL; | 
 | } | 
 |  | 
 | static int eeepc_setkeycode(struct input_dev *dev, int scancode, int keycode) | 
 | { | 
 | 	struct key_entry *key; | 
 | 	int old_keycode; | 
 |  | 
 | 	if (keycode < 0 || keycode > KEY_MAX) | 
 | 		return -EINVAL; | 
 |  | 
 | 	key = eepc_get_entry_by_scancode(scancode); | 
 | 	if (key && key->type == KE_KEY) { | 
 | 		old_keycode = key->keycode; | 
 | 		key->keycode = keycode; | 
 | 		set_bit(keycode, dev->keybit); | 
 | 		if (!eepc_get_entry_by_keycode(old_keycode)) | 
 | 			clear_bit(old_keycode, dev->keybit); | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	return -EINVAL; | 
 | } | 
 |  | 
 | static void cmsg_quirk(int cm, const char *name) | 
 | { | 
 | 	int dummy; | 
 |  | 
 | 	/* Some BIOSes do not report cm although it is avaliable. | 
 | 	   Check if cm_getv[cm] works and, if yes, assume cm should be set. */ | 
 | 	if (!(ehotk->cm_supported & (1 << cm)) | 
 | 	    && !read_acpi_int(ehotk->handle, cm_getv[cm], &dummy)) { | 
 | 		pr_info("%s (%x) not reported by BIOS," | 
 | 			" enabling anyway\n", name, 1 << cm); | 
 | 		ehotk->cm_supported |= 1 << cm; | 
 | 	} | 
 | } | 
 |  | 
 | static void cmsg_quirks(void) | 
 | { | 
 | 	cmsg_quirk(CM_ASL_LID, "LID"); | 
 | 	cmsg_quirk(CM_ASL_TYPE, "TYPE"); | 
 | 	cmsg_quirk(CM_ASL_PANELPOWER, "PANELPOWER"); | 
 | 	cmsg_quirk(CM_ASL_TPD, "TPD"); | 
 | } | 
 |  | 
 | static int eeepc_hotk_check(void) | 
 | { | 
 | 	const struct key_entry *key; | 
 | 	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; | 
 | 	int result; | 
 |  | 
 | 	result = acpi_bus_get_status(ehotk->device); | 
 | 	if (result) | 
 | 		return result; | 
 | 	if (ehotk->device->status.present) { | 
 | 		if (write_acpi_int(ehotk->handle, "INIT", ehotk->init_flag, | 
 | 				    &buffer)) { | 
 | 			pr_err("Hotkey initialization failed\n"); | 
 | 			return -ENODEV; | 
 | 		} else { | 
 | 			pr_notice("Hotkey init flags 0x%x\n", ehotk->init_flag); | 
 | 		} | 
 | 		/* get control methods supported */ | 
 | 		if (read_acpi_int(ehotk->handle, "CMSG" | 
 | 				   , &ehotk->cm_supported)) { | 
 | 			pr_err("Get control methods supported failed\n"); | 
 | 			return -ENODEV; | 
 | 		} else { | 
 | 			cmsg_quirks(); | 
 | 			pr_info("Get control methods supported: 0x%x\n", | 
 | 				ehotk->cm_supported); | 
 | 		} | 
 | 		ehotk->inputdev = input_allocate_device(); | 
 | 		if (!ehotk->inputdev) { | 
 | 			pr_info("Unable to allocate input device\n"); | 
 | 			return 0; | 
 | 		} | 
 | 		ehotk->inputdev->name = "Asus EeePC extra buttons"; | 
 | 		ehotk->inputdev->phys = EEEPC_HOTK_FILE "/input0"; | 
 | 		ehotk->inputdev->id.bustype = BUS_HOST; | 
 | 		ehotk->inputdev->getkeycode = eeepc_getkeycode; | 
 | 		ehotk->inputdev->setkeycode = eeepc_setkeycode; | 
 |  | 
 | 		for (key = eeepc_keymap; key->type != KE_END; key++) { | 
 | 			switch (key->type) { | 
 | 			case KE_KEY: | 
 | 				set_bit(EV_KEY, ehotk->inputdev->evbit); | 
 | 				set_bit(key->keycode, ehotk->inputdev->keybit); | 
 | 				break; | 
 | 			} | 
 | 		} | 
 | 		result = input_register_device(ehotk->inputdev); | 
 | 		if (result) { | 
 | 			pr_info("Unable to register input device\n"); | 
 | 			input_free_device(ehotk->inputdev); | 
 | 			return 0; | 
 | 		} | 
 | 	} else { | 
 | 		pr_err("Hotkey device not present, aborting\n"); | 
 | 		return -EINVAL; | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int notify_brn(void) | 
 | { | 
 | 	/* returns the *previous* brightness, or -1 */ | 
 | 	struct backlight_device *bd = eeepc_backlight_device; | 
 | 	if (bd) { | 
 | 		int old = bd->props.brightness; | 
 | 		bd->props.brightness = read_brightness(bd); | 
 | 		return old; | 
 | 	} | 
 | 	return -1; | 
 | } | 
 |  | 
 | static int eeepc_get_adapter_status(struct hotplug_slot *hotplug_slot, | 
 | 				    u8 *value) | 
 | { | 
 | 	int val = get_acpi(CM_ASL_WLAN); | 
 |  | 
 | 	if (val == 1 || val == 0) | 
 | 		*value = val; | 
 | 	else | 
 | 		return -EINVAL; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void eeepc_hotplug_work(struct work_struct *work) | 
 | { | 
 | 	struct pci_dev *dev; | 
 | 	struct pci_bus *bus = pci_find_bus(0, 1); | 
 | 	bool blocked; | 
 |  | 
 | 	if (!bus) { | 
 | 		pr_warning("Unable to find PCI bus 1?\n"); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	blocked = eeepc_wlan_rfkill_blocked(); | 
 | 	if (!blocked) { | 
 | 		dev = pci_get_slot(bus, 0); | 
 | 		if (dev) { | 
 | 			/* Device already present */ | 
 | 			pci_dev_put(dev); | 
 | 			return; | 
 | 		} | 
 | 		dev = pci_scan_single_device(bus, 0); | 
 | 		if (dev) { | 
 | 			pci_bus_assign_resources(bus); | 
 | 			if (pci_bus_add_device(dev)) | 
 | 				pr_err("Unable to hotplug wifi\n"); | 
 | 		} | 
 | 	} else { | 
 | 		dev = pci_get_slot(bus, 0); | 
 | 		if (dev) { | 
 | 			pci_remove_bus_device(dev); | 
 | 			pci_dev_put(dev); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	rfkill_set_sw_state(ehotk->wlan_rfkill, blocked); | 
 | } | 
 |  | 
 | static void eeepc_rfkill_notify(acpi_handle handle, u32 event, void *data) | 
 | { | 
 | 	if (event != ACPI_NOTIFY_BUS_CHECK) | 
 | 		return; | 
 |  | 
 | 	schedule_work(&ehotk->hotplug_work); | 
 | } | 
 |  | 
 | static void eeepc_hotk_notify(struct acpi_device *device, u32 event) | 
 | { | 
 | 	static struct key_entry *key; | 
 | 	u16 count; | 
 | 	int brn = -ENODEV; | 
 |  | 
 | 	if (!ehotk) | 
 | 		return; | 
 | 	if (event > ACPI_MAX_SYS_NOTIFY) | 
 | 		return; | 
 | 	if (event >= NOTIFY_BRN_MIN && event <= NOTIFY_BRN_MAX) | 
 | 		brn = notify_brn(); | 
 | 	count = ehotk->event_count[event % 128]++; | 
 | 	acpi_bus_generate_proc_event(ehotk->device, event, count); | 
 | 	acpi_bus_generate_netlink_event(ehotk->device->pnp.device_class, | 
 | 					dev_name(&ehotk->device->dev), event, | 
 | 					count); | 
 | 	if (ehotk->inputdev) { | 
 | 		if (brn != -ENODEV) { | 
 | 			/* brightness-change events need special | 
 | 			 * handling for conversion to key events | 
 | 			 */ | 
 | 			if (brn < 0) | 
 | 				brn = event; | 
 | 			else | 
 | 				brn += NOTIFY_BRN_MIN; | 
 | 			if (event < brn) | 
 | 				event = NOTIFY_BRN_MIN; /* brightness down */ | 
 | 			else if (event > brn) | 
 | 				event = NOTIFY_BRN_MIN + 2; /* ... up */ | 
 | 			else | 
 | 				event = NOTIFY_BRN_MIN + 1; /* ... unchanged */ | 
 | 		} | 
 | 		key = eepc_get_entry_by_scancode(event); | 
 | 		if (key) { | 
 | 			switch (key->type) { | 
 | 			case KE_KEY: | 
 | 				input_report_key(ehotk->inputdev, key->keycode, | 
 | 						 1); | 
 | 				input_sync(ehotk->inputdev); | 
 | 				input_report_key(ehotk->inputdev, key->keycode, | 
 | 						 0); | 
 | 				input_sync(ehotk->inputdev); | 
 | 				break; | 
 | 			} | 
 | 		} | 
 | 	} | 
 | } | 
 |  | 
 | static int eeepc_register_rfkill_notifier(char *node) | 
 | { | 
 | 	acpi_status status = AE_OK; | 
 | 	acpi_handle handle; | 
 |  | 
 | 	status = acpi_get_handle(NULL, node, &handle); | 
 |  | 
 | 	if (ACPI_SUCCESS(status)) { | 
 | 		status = acpi_install_notify_handler(handle, | 
 | 						     ACPI_SYSTEM_NOTIFY, | 
 | 						     eeepc_rfkill_notify, | 
 | 						     NULL); | 
 | 		if (ACPI_FAILURE(status)) | 
 | 			pr_warning("Failed to register notify on %s\n", node); | 
 | 	} else | 
 | 		return -ENODEV; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void eeepc_unregister_rfkill_notifier(char *node) | 
 | { | 
 | 	acpi_status status = AE_OK; | 
 | 	acpi_handle handle; | 
 |  | 
 | 	status = acpi_get_handle(NULL, node, &handle); | 
 |  | 
 | 	if (ACPI_SUCCESS(status)) { | 
 | 		status = acpi_remove_notify_handler(handle, | 
 | 						     ACPI_SYSTEM_NOTIFY, | 
 | 						     eeepc_rfkill_notify); | 
 | 		if (ACPI_FAILURE(status)) | 
 | 			pr_err("Error removing rfkill notify handler %s\n", | 
 | 				node); | 
 | 	} | 
 | } | 
 |  | 
 | static void eeepc_cleanup_pci_hotplug(struct hotplug_slot *hotplug_slot) | 
 | { | 
 | 	kfree(hotplug_slot->info); | 
 | 	kfree(hotplug_slot); | 
 | } | 
 |  | 
 | static int eeepc_setup_pci_hotplug(void) | 
 | { | 
 | 	int ret = -ENOMEM; | 
 | 	struct pci_bus *bus = pci_find_bus(0, 1); | 
 |  | 
 | 	if (!bus) { | 
 | 		pr_err("Unable to find wifi PCI bus\n"); | 
 | 		return -ENODEV; | 
 | 	} | 
 |  | 
 | 	ehotk->hotplug_slot = kzalloc(sizeof(struct hotplug_slot), GFP_KERNEL); | 
 | 	if (!ehotk->hotplug_slot) | 
 | 		goto error_slot; | 
 |  | 
 | 	ehotk->hotplug_slot->info = kzalloc(sizeof(struct hotplug_slot_info), | 
 | 					    GFP_KERNEL); | 
 | 	if (!ehotk->hotplug_slot->info) | 
 | 		goto error_info; | 
 |  | 
 | 	ehotk->hotplug_slot->private = ehotk; | 
 | 	ehotk->hotplug_slot->release = &eeepc_cleanup_pci_hotplug; | 
 | 	ehotk->hotplug_slot->ops = &eeepc_hotplug_slot_ops; | 
 | 	eeepc_get_adapter_status(ehotk->hotplug_slot, | 
 | 				 &ehotk->hotplug_slot->info->adapter_status); | 
 |  | 
 | 	ret = pci_hp_register(ehotk->hotplug_slot, bus, 0, "eeepc-wifi"); | 
 | 	if (ret) { | 
 | 		pr_err("Unable to register hotplug slot - %d\n", ret); | 
 | 		goto error_register; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 |  | 
 | error_register: | 
 | 	kfree(ehotk->hotplug_slot->info); | 
 | error_info: | 
 | 	kfree(ehotk->hotplug_slot); | 
 | 	ehotk->hotplug_slot = NULL; | 
 | error_slot: | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int eeepc_hotk_add(struct acpi_device *device) | 
 | { | 
 | 	int result; | 
 |  | 
 | 	if (!device) | 
 | 		 return -EINVAL; | 
 | 	pr_notice(EEEPC_HOTK_NAME "\n"); | 
 | 	ehotk = kzalloc(sizeof(struct eeepc_hotk), GFP_KERNEL); | 
 | 	if (!ehotk) | 
 | 		return -ENOMEM; | 
 | 	ehotk->init_flag = DISABLE_ASL_WLAN | DISABLE_ASL_DISPLAYSWITCH; | 
 | 	ehotk->handle = device->handle; | 
 | 	strcpy(acpi_device_name(device), EEEPC_HOTK_DEVICE_NAME); | 
 | 	strcpy(acpi_device_class(device), EEEPC_HOTK_CLASS); | 
 | 	device->driver_data = ehotk; | 
 | 	ehotk->device = device; | 
 | 	result = eeepc_hotk_check(); | 
 | 	if (result) | 
 | 		goto ehotk_fail; | 
 |  | 
 | 	return 0; | 
 |  | 
 |  ehotk_fail: | 
 | 	kfree(ehotk); | 
 | 	ehotk = NULL; | 
 |  | 
 | 	return result; | 
 | } | 
 |  | 
 | static int eeepc_hotk_remove(struct acpi_device *device, int type) | 
 | { | 
 | 	if (!device || !acpi_driver_data(device)) | 
 | 		 return -EINVAL; | 
 |  | 
 | 	kfree(ehotk); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int eeepc_hotk_resume(struct acpi_device *device) | 
 | { | 
 | 	if (ehotk->wlan_rfkill) { | 
 | 		bool wlan; | 
 |  | 
 | 		/* Workaround - it seems that _PTS disables the wireless | 
 | 		   without notification or changing the value read by WLAN. | 
 | 		   Normally this is fine because the correct value is restored | 
 | 		   from the non-volatile storage on resume, but we need to do | 
 | 		   it ourself if case suspend is aborted, or we lose wireless. | 
 | 		 */ | 
 | 		wlan = get_acpi(CM_ASL_WLAN); | 
 | 		set_acpi(CM_ASL_WLAN, wlan); | 
 |  | 
 | 		rfkill_set_sw_state(ehotk->wlan_rfkill, wlan != 1); | 
 |  | 
 | 		schedule_work(&ehotk->hotplug_work); | 
 | 	} | 
 |  | 
 | 	if (ehotk->bluetooth_rfkill) | 
 | 		rfkill_set_sw_state(ehotk->bluetooth_rfkill, | 
 | 				    get_acpi(CM_ASL_BLUETOOTH) != 1); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * Hwmon | 
 |  */ | 
 | static int eeepc_get_fan_pwm(void) | 
 | { | 
 | 	int value = 0; | 
 |  | 
 | 	read_acpi_int(NULL, EEEPC_EC_FAN_PWM, &value); | 
 | 	value = value * 255 / 100; | 
 | 	return (value); | 
 | } | 
 |  | 
 | static void eeepc_set_fan_pwm(int value) | 
 | { | 
 | 	value = SENSORS_LIMIT(value, 0, 255); | 
 | 	value = value * 100 / 255; | 
 | 	ec_write(EEEPC_EC_SC02, value); | 
 | } | 
 |  | 
 | static int eeepc_get_fan_rpm(void) | 
 | { | 
 | 	int high = 0; | 
 | 	int low = 0; | 
 |  | 
 | 	read_acpi_int(NULL, EEEPC_EC_FAN_HRPM, &high); | 
 | 	read_acpi_int(NULL, EEEPC_EC_FAN_LRPM, &low); | 
 | 	return (high << 8 | low); | 
 | } | 
 |  | 
 | static int eeepc_get_fan_ctrl(void) | 
 | { | 
 | 	int value = 0; | 
 |  | 
 | 	read_acpi_int(NULL, EEEPC_EC_FAN_CTRL, &value); | 
 | 	return ((value & 0x02 ? 1 : 0)); | 
 | } | 
 |  | 
 | static void eeepc_set_fan_ctrl(int manual) | 
 | { | 
 | 	int value = 0; | 
 |  | 
 | 	read_acpi_int(NULL, EEEPC_EC_FAN_CTRL, &value); | 
 | 	if (manual) | 
 | 		value |= 0x02; | 
 | 	else | 
 | 		value &= ~0x02; | 
 | 	ec_write(EEEPC_EC_SFB3, value); | 
 | } | 
 |  | 
 | static ssize_t store_sys_hwmon(void (*set)(int), const char *buf, size_t count) | 
 | { | 
 | 	int rv, value; | 
 |  | 
 | 	rv = parse_arg(buf, count, &value); | 
 | 	if (rv > 0) | 
 | 		set(value); | 
 | 	return rv; | 
 | } | 
 |  | 
 | static ssize_t show_sys_hwmon(int (*get)(void), char *buf) | 
 | { | 
 | 	return sprintf(buf, "%d\n", get()); | 
 | } | 
 |  | 
 | #define EEEPC_CREATE_SENSOR_ATTR(_name, _mode, _set, _get)		\ | 
 | 	static ssize_t show_##_name(struct device *dev,			\ | 
 | 				    struct device_attribute *attr,	\ | 
 | 				    char *buf)				\ | 
 | 	{								\ | 
 | 		return show_sys_hwmon(_set, buf);			\ | 
 | 	}								\ | 
 | 	static ssize_t store_##_name(struct device *dev,		\ | 
 | 				     struct device_attribute *attr,	\ | 
 | 				     const char *buf, size_t count)	\ | 
 | 	{								\ | 
 | 		return store_sys_hwmon(_get, buf, count);		\ | 
 | 	}								\ | 
 | 	static SENSOR_DEVICE_ATTR(_name, _mode, show_##_name, store_##_name, 0); | 
 |  | 
 | EEEPC_CREATE_SENSOR_ATTR(fan1_input, S_IRUGO, eeepc_get_fan_rpm, NULL); | 
 | EEEPC_CREATE_SENSOR_ATTR(pwm1, S_IRUGO | S_IWUSR, | 
 | 			 eeepc_get_fan_pwm, eeepc_set_fan_pwm); | 
 | EEEPC_CREATE_SENSOR_ATTR(pwm1_enable, S_IRUGO | S_IWUSR, | 
 | 			 eeepc_get_fan_ctrl, eeepc_set_fan_ctrl); | 
 |  | 
 | static ssize_t | 
 | show_name(struct device *dev, struct device_attribute *attr, char *buf) | 
 | { | 
 | 	return sprintf(buf, "eeepc\n"); | 
 | } | 
 | static SENSOR_DEVICE_ATTR(name, S_IRUGO, show_name, NULL, 0); | 
 |  | 
 | static struct attribute *hwmon_attributes[] = { | 
 | 	&sensor_dev_attr_pwm1.dev_attr.attr, | 
 | 	&sensor_dev_attr_fan1_input.dev_attr.attr, | 
 | 	&sensor_dev_attr_pwm1_enable.dev_attr.attr, | 
 | 	&sensor_dev_attr_name.dev_attr.attr, | 
 | 	NULL | 
 | }; | 
 |  | 
 | static struct attribute_group hwmon_attribute_group = { | 
 | 	.attrs = hwmon_attributes | 
 | }; | 
 |  | 
 | /* | 
 |  * exit/init | 
 |  */ | 
 | static void eeepc_backlight_exit(void) | 
 | { | 
 | 	if (eeepc_backlight_device) | 
 | 		backlight_device_unregister(eeepc_backlight_device); | 
 | 	eeepc_backlight_device = NULL; | 
 | } | 
 |  | 
 | static void eeepc_rfkill_exit(void) | 
 | { | 
 | 	eeepc_unregister_rfkill_notifier("\\_SB.PCI0.P0P6"); | 
 | 	eeepc_unregister_rfkill_notifier("\\_SB.PCI0.P0P7"); | 
 | 	if (ehotk->wlan_rfkill) | 
 | 		rfkill_unregister(ehotk->wlan_rfkill); | 
 | 	if (ehotk->bluetooth_rfkill) | 
 | 		rfkill_unregister(ehotk->bluetooth_rfkill); | 
 | 	if (ehotk->wwan3g_rfkill) | 
 | 		rfkill_unregister(ehotk->wwan3g_rfkill); | 
 | 	if (ehotk->hotplug_slot) | 
 | 		pci_hp_deregister(ehotk->hotplug_slot); | 
 | } | 
 |  | 
 | static void eeepc_input_exit(void) | 
 | { | 
 | 	if (ehotk->inputdev) | 
 | 		input_unregister_device(ehotk->inputdev); | 
 | } | 
 |  | 
 | static void eeepc_hwmon_exit(void) | 
 | { | 
 | 	struct device *hwmon; | 
 |  | 
 | 	hwmon = eeepc_hwmon_device; | 
 | 	if (!hwmon) | 
 | 		return ; | 
 | 	sysfs_remove_group(&hwmon->kobj, | 
 | 			   &hwmon_attribute_group); | 
 | 	hwmon_device_unregister(hwmon); | 
 | 	eeepc_hwmon_device = NULL; | 
 | } | 
 |  | 
 | static void __exit eeepc_laptop_exit(void) | 
 | { | 
 | 	eeepc_backlight_exit(); | 
 | 	eeepc_rfkill_exit(); | 
 | 	eeepc_input_exit(); | 
 | 	eeepc_hwmon_exit(); | 
 | 	acpi_bus_unregister_driver(&eeepc_hotk_driver); | 
 | 	sysfs_remove_group(&platform_device->dev.kobj, | 
 | 			   &platform_attribute_group); | 
 | 	platform_device_unregister(platform_device); | 
 | 	platform_driver_unregister(&platform_driver); | 
 | } | 
 |  | 
 | static int eeepc_new_rfkill(struct rfkill **rfkill, | 
 | 			    const char *name, struct device *dev, | 
 | 			    enum rfkill_type type, int cm) | 
 | { | 
 | 	int result; | 
 |  | 
 | 	result = get_acpi(cm); | 
 | 	if (result < 0) | 
 | 		return result; | 
 |  | 
 | 	*rfkill = rfkill_alloc(name, dev, type, | 
 | 			       &eeepc_rfkill_ops, (void *)(unsigned long)cm); | 
 |  | 
 | 	if (!*rfkill) | 
 | 		return -EINVAL; | 
 |  | 
 | 	rfkill_init_sw_state(*rfkill, get_acpi(cm) != 1); | 
 | 	result = rfkill_register(*rfkill); | 
 | 	if (result) { | 
 | 		rfkill_destroy(*rfkill); | 
 | 		*rfkill = NULL; | 
 | 		return result; | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 |  | 
 | static int eeepc_rfkill_init(struct device *dev) | 
 | { | 
 | 	int result = 0; | 
 |  | 
 | 	INIT_WORK(&ehotk->hotplug_work, eeepc_hotplug_work); | 
 |  | 
 | 	eeepc_register_rfkill_notifier("\\_SB.PCI0.P0P6"); | 
 | 	eeepc_register_rfkill_notifier("\\_SB.PCI0.P0P7"); | 
 |  | 
 | 	result = eeepc_new_rfkill(&ehotk->wlan_rfkill, | 
 | 				  "eeepc-wlan", dev, | 
 | 				  RFKILL_TYPE_WLAN, CM_ASL_WLAN); | 
 |  | 
 | 	if (result && result != -ENODEV) | 
 | 		goto exit; | 
 |  | 
 | 	result = eeepc_new_rfkill(&ehotk->bluetooth_rfkill, | 
 | 				  "eeepc-bluetooth", dev, | 
 | 				  RFKILL_TYPE_BLUETOOTH, CM_ASL_BLUETOOTH); | 
 |  | 
 | 	if (result && result != -ENODEV) | 
 | 		goto exit; | 
 |  | 
 | 	result = eeepc_new_rfkill(&ehotk->wwan3g_rfkill, | 
 | 				  "eeepc-wwan3g", dev, | 
 | 				  RFKILL_TYPE_WWAN, CM_ASL_3G); | 
 |  | 
 | 	if (result && result != -ENODEV) | 
 | 		goto exit; | 
 |  | 
 | 	result = eeepc_setup_pci_hotplug(); | 
 | 	/* | 
 | 	 * If we get -EBUSY then something else is handling the PCI hotplug - | 
 | 	 * don't fail in this case | 
 | 	 */ | 
 | 	if (result == -EBUSY) | 
 | 		result = 0; | 
 |  | 
 | exit: | 
 | 	if (result && result != -ENODEV) | 
 | 		eeepc_rfkill_exit(); | 
 | 	return result; | 
 | } | 
 |  | 
 | static int eeepc_backlight_init(struct device *dev) | 
 | { | 
 | 	struct backlight_device *bd; | 
 |  | 
 | 	bd = backlight_device_register(EEEPC_HOTK_FILE, dev, | 
 | 				       NULL, &eeepcbl_ops); | 
 | 	if (IS_ERR(bd)) { | 
 | 		pr_err("Could not register eeepc backlight device\n"); | 
 | 		eeepc_backlight_device = NULL; | 
 | 		return PTR_ERR(bd); | 
 | 	} | 
 | 	eeepc_backlight_device = bd; | 
 | 	bd->props.max_brightness = 15; | 
 | 	bd->props.brightness = read_brightness(NULL); | 
 | 	bd->props.power = FB_BLANK_UNBLANK; | 
 | 	backlight_update_status(bd); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int eeepc_hwmon_init(struct device *dev) | 
 | { | 
 | 	struct device *hwmon; | 
 | 	int result; | 
 |  | 
 | 	hwmon = hwmon_device_register(dev); | 
 | 	if (IS_ERR(hwmon)) { | 
 | 		pr_err("Could not register eeepc hwmon device\n"); | 
 | 		eeepc_hwmon_device = NULL; | 
 | 		return PTR_ERR(hwmon); | 
 | 	} | 
 | 	eeepc_hwmon_device = hwmon; | 
 | 	result = sysfs_create_group(&hwmon->kobj, | 
 | 				    &hwmon_attribute_group); | 
 | 	if (result) | 
 | 		eeepc_hwmon_exit(); | 
 | 	return result; | 
 | } | 
 |  | 
 | static int __init eeepc_laptop_init(void) | 
 | { | 
 | 	struct device *dev; | 
 | 	int result; | 
 |  | 
 | 	if (acpi_disabled) | 
 | 		return -ENODEV; | 
 | 	result = acpi_bus_register_driver(&eeepc_hotk_driver); | 
 | 	if (result < 0) | 
 | 		return result; | 
 | 	if (!ehotk) { | 
 | 		acpi_bus_unregister_driver(&eeepc_hotk_driver); | 
 | 		return -ENODEV; | 
 | 	} | 
 |  | 
 | 	eeepc_enable_camera(); | 
 |  | 
 | 	/* Register platform stuff */ | 
 | 	result = platform_driver_register(&platform_driver); | 
 | 	if (result) | 
 | 		goto fail_platform_driver; | 
 | 	platform_device = platform_device_alloc(EEEPC_HOTK_FILE, -1); | 
 | 	if (!platform_device) { | 
 | 		result = -ENOMEM; | 
 | 		goto fail_platform_device1; | 
 | 	} | 
 | 	result = platform_device_add(platform_device); | 
 | 	if (result) | 
 | 		goto fail_platform_device2; | 
 | 	result = sysfs_create_group(&platform_device->dev.kobj, | 
 | 				    &platform_attribute_group); | 
 | 	if (result) | 
 | 		goto fail_sysfs; | 
 |  | 
 | 	dev = &platform_device->dev; | 
 |  | 
 | 	if (!acpi_video_backlight_support()) { | 
 | 		result = eeepc_backlight_init(dev); | 
 | 		if (result) | 
 | 			goto fail_backlight; | 
 | 	} else | 
 | 		pr_info("Backlight controlled by ACPI video " | 
 | 			"driver\n"); | 
 |  | 
 | 	result = eeepc_hwmon_init(dev); | 
 | 	if (result) | 
 | 		goto fail_hwmon; | 
 |  | 
 | 	result = eeepc_rfkill_init(dev); | 
 | 	if (result) | 
 | 		goto fail_rfkill; | 
 |  | 
 | 	return 0; | 
 | fail_rfkill: | 
 | 	eeepc_hwmon_exit(); | 
 | fail_hwmon: | 
 | 	eeepc_backlight_exit(); | 
 | fail_backlight: | 
 | 	sysfs_remove_group(&platform_device->dev.kobj, | 
 | 			   &platform_attribute_group); | 
 | fail_sysfs: | 
 | 	platform_device_del(platform_device); | 
 | fail_platform_device2: | 
 | 	platform_device_put(platform_device); | 
 | fail_platform_device1: | 
 | 	platform_driver_unregister(&platform_driver); | 
 | fail_platform_driver: | 
 | 	eeepc_input_exit(); | 
 | 	return result; | 
 | } | 
 |  | 
 | module_init(eeepc_laptop_init); | 
 | module_exit(eeepc_laptop_exit); |