PM core: rename suspend and resume functions
This patch (as1241) renames a bunch of functions in the PM core.
Rather than go through a boring list of name changes, suffice it to
say that in the end we have a bunch of pairs of functions:
device_resume_noirq dpm_resume_noirq
device_resume dpm_resume
device_complete dpm_complete
device_suspend_noirq dpm_suspend_noirq
device_suspend dpm_suspend
device_prepare dpm_prepare
in which device_X does the X operation on a single device and dpm_X
invokes device_X for all devices in the dpm_list.
In addition, the old dpm_power_up and device_resume_noirq have been
combined into a single function (dpm_resume_noirq).
Lastly, dpm_suspend_start and dpm_resume_end are the renamed versions
of the former top-level device_suspend and device_resume routines.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
diff --git a/kernel/kexec.c b/kernel/kexec.c
index 5a3da87..ae1c352 100644
--- a/kernel/kexec.c
+++ b/kernel/kexec.c
@@ -1448,17 +1448,17 @@
goto Restore_console;
}
suspend_console();
- error = device_suspend(PMSG_FREEZE);
+ error = dpm_suspend_start(PMSG_FREEZE);
if (error)
goto Resume_console;
- /* At this point, device_suspend() has been called,
- * but *not* device_suspend_noirq(). We *must* call
- * device_suspend_noirq() now. Otherwise, drivers for
+ /* At this point, dpm_suspend_start() has been called,
+ * but *not* dpm_suspend_noirq(). We *must* call
+ * dpm_suspend_noirq() now. Otherwise, drivers for
* some devices (e.g. interrupt controllers) become
* desynchronized with the actual state of the
* hardware at resume time, and evil weirdness ensues.
*/
- error = device_suspend_noirq(PMSG_FREEZE);
+ error = dpm_suspend_noirq(PMSG_FREEZE);
if (error)
goto Resume_devices;
error = disable_nonboot_cpus();
@@ -1486,9 +1486,9 @@
local_irq_enable();
Enable_cpus:
enable_nonboot_cpus();
- device_resume_noirq(PMSG_RESTORE);
+ dpm_resume_noirq(PMSG_RESTORE);
Resume_devices:
- device_resume(PMSG_RESTORE);
+ dpm_resume_end(PMSG_RESTORE);
Resume_console:
resume_console();
thaw_processes();
diff --git a/kernel/power/disk.c b/kernel/power/disk.c
index 1c18bc8..a9beba6 100644
--- a/kernel/power/disk.c
+++ b/kernel/power/disk.c
@@ -215,13 +215,13 @@
if (error)
return error;
- /* At this point, device_suspend() has been called, but *not*
- * device_suspend_noirq(). We *must* call device_suspend_noirq() now.
+ /* At this point, dpm_suspend_start() has been called, but *not*
+ * dpm_suspend_noirq(). We *must* call dpm_suspend_noirq() now.
* Otherwise, drivers for some devices (e.g. interrupt controllers)
* become desynchronized with the actual state of the hardware
* at resume time, and evil weirdness ensues.
*/
- error = device_suspend_noirq(PMSG_FREEZE);
+ error = dpm_suspend_noirq(PMSG_FREEZE);
if (error) {
printk(KERN_ERR "PM: Some devices failed to power down, "
"aborting hibernation\n");
@@ -262,7 +262,7 @@
Power_up:
sysdev_resume();
- /* NOTE: device_resume_noirq() is just a resume() for devices
+ /* NOTE: dpm_resume_noirq() is just a resume() for devices
* that suspended with irqs off ... no overall powerup.
*/
@@ -275,7 +275,7 @@
Platform_finish:
platform_finish(platform_mode);
- device_resume_noirq(in_suspend ?
+ dpm_resume_noirq(in_suspend ?
(error ? PMSG_RECOVER : PMSG_THAW) : PMSG_RESTORE);
return error;
@@ -304,7 +304,7 @@
goto Close;
suspend_console();
- error = device_suspend(PMSG_FREEZE);
+ error = dpm_suspend_start(PMSG_FREEZE);
if (error)
goto Recover_platform;
@@ -315,7 +315,7 @@
/* Control returns here after successful restore */
Resume_devices:
- device_resume(in_suspend ?
+ dpm_resume_end(in_suspend ?
(error ? PMSG_RECOVER : PMSG_THAW) : PMSG_RESTORE);
resume_console();
Close:
@@ -339,7 +339,7 @@
{
int error;
- error = device_suspend_noirq(PMSG_QUIESCE);
+ error = dpm_suspend_noirq(PMSG_QUIESCE);
if (error) {
printk(KERN_ERR "PM: Some devices failed to power down, "
"aborting resume\n");
@@ -394,7 +394,7 @@
Cleanup:
platform_restore_cleanup(platform_mode);
- device_resume_noirq(PMSG_RECOVER);
+ dpm_resume_noirq(PMSG_RECOVER);
return error;
}
@@ -414,10 +414,10 @@
pm_prepare_console();
suspend_console();
- error = device_suspend(PMSG_QUIESCE);
+ error = dpm_suspend_start(PMSG_QUIESCE);
if (!error) {
error = resume_target_kernel(platform_mode);
- device_resume(PMSG_RECOVER);
+ dpm_resume_end(PMSG_RECOVER);
}
resume_console();
pm_restore_console();
@@ -447,14 +447,14 @@
entering_platform_hibernation = true;
suspend_console();
- error = device_suspend(PMSG_HIBERNATE);
+ error = dpm_suspend_start(PMSG_HIBERNATE);
if (error) {
if (hibernation_ops->recover)
hibernation_ops->recover();
goto Resume_devices;
}
- error = device_suspend_noirq(PMSG_HIBERNATE);
+ error = dpm_suspend_noirq(PMSG_HIBERNATE);
if (error)
goto Resume_devices;
@@ -479,11 +479,11 @@
Platofrm_finish:
hibernation_ops->finish();
- device_suspend_noirq(PMSG_RESTORE);
+ dpm_suspend_noirq(PMSG_RESTORE);
Resume_devices:
entering_platform_hibernation = false;
- device_resume(PMSG_RESTORE);
+ dpm_resume_end(PMSG_RESTORE);
resume_console();
Close:
diff --git a/kernel/power/main.c b/kernel/power/main.c
index 2f6638e..46386b9 100644
--- a/kernel/power/main.c
+++ b/kernel/power/main.c
@@ -295,7 +295,7 @@
return error;
}
- error = device_suspend_noirq(PMSG_SUSPEND);
+ error = dpm_suspend_noirq(PMSG_SUSPEND);
if (error) {
printk(KERN_ERR "PM: Some devices failed to power down\n");
goto Platfrom_finish;
@@ -335,7 +335,7 @@
suspend_ops->wake();
Power_up_devices:
- device_resume_noirq(PMSG_RESUME);
+ dpm_resume_noirq(PMSG_RESUME);
Platfrom_finish:
if (suspend_ops->finish)
@@ -363,7 +363,7 @@
}
suspend_console();
suspend_test_start();
- error = device_suspend(PMSG_SUSPEND);
+ error = dpm_suspend_start(PMSG_SUSPEND);
if (error) {
printk(KERN_ERR "PM: Some devices failed to suspend\n");
goto Recover_platform;
@@ -376,7 +376,7 @@
Resume_devices:
suspend_test_start();
- device_resume(PMSG_RESUME);
+ dpm_resume_end(PMSG_RESUME);
suspend_test_finish("resume devices");
resume_console();
Close: