igb: add support for Intel I350 Gigabit Network Connection
This patch adds support for the the I350 Gigabit network connection which
is the follow-on part to the 82580.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
CC: James Hearn <james.r.hearn@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c
index 3664915..2501c5d 100644
--- a/drivers/net/igb/igb_main.c
+++ b/drivers/net/igb/igb_main.c
@@ -61,6 +61,10 @@
};
static DEFINE_PCI_DEVICE_TABLE(igb_pci_tbl) = {
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_I350_COPPER), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_I350_FIBER), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_I350_SERDES), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_I350_SGMII), board_82575 },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82580_COPPER), board_82575 },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82580_FIBER), board_82575 },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82580_SERDES), board_82575 },
@@ -327,6 +331,7 @@
}
case e1000_82575:
case e1000_82580:
+ case e1000_i350:
default:
for (; i < adapter->num_rx_queues; i++)
adapter->rx_ring[i]->reg_idx = rbase_offset + i;
@@ -470,6 +475,7 @@
q_vector->eims_value = 1 << msix_vector;
break;
case e1000_82580:
+ case e1000_i350:
/* 82580 uses the same table-based approach as 82576 but has fewer
entries as a result we carry over for queues greater than 4. */
if (rx_queue > IGB_N0_QUEUE) {
@@ -550,6 +556,7 @@
case e1000_82576:
case e1000_82580:
+ case e1000_i350:
/* Turn on MSI-X capability first, or our settings
* won't stick. And it will take days to debug. */
wr32(E1000_GPIE, E1000_GPIE_MSIX_MODE |
@@ -1256,6 +1263,7 @@
* To take effect CTRL.RST is required.
*/
switch (mac->type) {
+ case e1000_i350:
case e1000_82580:
pba = rd32(E1000_RXPBS);
pba = igb_rxpbs_adjust_82580(pba);
@@ -1828,6 +1836,7 @@
struct e1000_hw *hw = &adapter->hw;
switch (hw->mac.type) {
+ case e1000_i350:
case e1000_82580:
memset(&adapter->cycles, 0, sizeof(adapter->cycles));
adapter->cycles.read = igb_read_clock;
@@ -2341,6 +2350,7 @@
if (adapter->vfs_allocated_count) {
/* 82575 and 82576 supports 2 RSS queues for VMDq */
switch (hw->mac.type) {
+ case e1000_i350:
case e1000_82580:
num_rx_queues = 1;
shift = 0;
@@ -6152,6 +6162,8 @@
reg = rd32(E1000_RPLOLR);
reg |= E1000_RPLOLR_STRVLAN;
wr32(E1000_RPLOLR, reg);
+ case e1000_i350:
+ /* none of the above registers are supported by i350 */
break;
}