ACPICA: Formatting update - no functional changes
Split long lines, update comments.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
diff --git a/drivers/acpi/acpica/evgpeblk.c b/drivers/acpi/acpica/evgpeblk.c
index f7b3d2a..7b34636 100644
--- a/drivers/acpi/acpica/evgpeblk.c
+++ b/drivers/acpi/acpica/evgpeblk.c
@@ -104,9 +104,9 @@
while (gpe_block) {
if ((&gpe_block->event_info[0] <= gpe_event_info) &&
- (&gpe_block->
- event_info[((acpi_size) gpe_block->
- register_count) * 8] >
+ (&gpe_block->event_info[((acpi_size)
+ gpe_block->
+ register_count) * 8] >
gpe_event_info)) {
return (TRUE);
}
@@ -210,10 +210,9 @@
/* Now look at the individual GPEs in this byte register */
for (j = 0; j < ACPI_GPE_REGISTER_WIDTH; j++) {
- gpe_event_info =
- &gpe_block->
- event_info[((acpi_size) i *
- ACPI_GPE_REGISTER_WIDTH) + j];
+ gpe_event_info = &gpe_block->event_info[((acpi_size) i *
+ ACPI_GPE_REGISTER_WIDTH)
+ + j];
if ((gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK) ==
ACPI_GPE_DISPATCH_HANDLER) {
@@ -293,8 +292,8 @@
/* Unknown method type, just ignore it! */
ACPI_DEBUG_PRINT((ACPI_DB_LOAD,
- "Ignoring unknown GPE method type: %s (name not of form _Lxx or _Exx)",
- name));
+ "Ignoring unknown GPE method type: %s "
+ "(name not of form _Lxx or _Exx)", name));
return_ACPI_STATUS(AE_OK);
}
@@ -306,17 +305,16 @@
/* Conversion failed; invalid method, just ignore it */
ACPI_DEBUG_PRINT((ACPI_DB_LOAD,
- "Could not extract GPE number from name: %s (name is not of form _Lxx or _Exx)",
- name));
+ "Could not extract GPE number from name: %s "
+ "(name is not of form _Lxx or _Exx)", name));
return_ACPI_STATUS(AE_OK);
}
/* Ensure that we have a valid GPE number for this GPE block */
if ((gpe_number < gpe_block->block_base_number) ||
- (gpe_number >=
- (gpe_block->block_base_number +
- (gpe_block->register_count * 8)))) {
+ (gpe_number >= (gpe_block->block_base_number +
+ (gpe_block->register_count * 8)))) {
/*
* Not valid for this GPE block, just ignore it. However, it may be
* valid for a different GPE block, since GPE0 and GPE1 methods both
@@ -423,9 +421,9 @@
if ((obj_desc->package.count < 2) ||
((obj_desc->package.elements[0])->common.type !=
- ACPI_TYPE_LOCAL_REFERENCE)
- || ((obj_desc->package.elements[1])->common.type !=
- ACPI_TYPE_INTEGER)) {
+ ACPI_TYPE_LOCAL_REFERENCE) ||
+ ((obj_desc->package.elements[1])->common.type !=
+ ACPI_TYPE_INTEGER)) {
goto cleanup;
}
@@ -450,11 +448,11 @@
*/
if ((gpe_device == target_gpe_device) &&
(gpe_number >= gpe_block->block_base_number) &&
- (gpe_number <
- gpe_block->block_base_number + (gpe_block->register_count * 8))) {
- gpe_event_info =
- &gpe_block->event_info[gpe_number -
- gpe_block->block_base_number];
+ (gpe_number < gpe_block->block_base_number +
+ (gpe_block->register_count * 8))) {
+ gpe_event_info = &gpe_block->event_info[gpe_number -
+ gpe_block->
+ block_base_number];
/* Mark GPE for WAKE-ONLY but WAKE_DISABLED */
@@ -1033,8 +1031,8 @@
* 1) are "runtime" or "run/wake" GPEs, and
* 2) have a corresponding _Lxx or _Exx method
*
- * Any other GPEs within this block must be enabled via the acpi_enable_gpe()
- * external interface.
+ * Any other GPEs within this block must be enabled via the
+ * acpi_enable_gpe() external interface.
*/
wake_gpe_count = 0;
gpe_enabled_count = 0;
@@ -1044,14 +1042,13 @@
/* Get the info block for this particular GPE */
- gpe_event_info =
- &gpe_block->
- event_info[((acpi_size) i *
- ACPI_GPE_REGISTER_WIDTH) + j];
+ gpe_event_info = &gpe_block->event_info[((acpi_size) i *
+ ACPI_GPE_REGISTER_WIDTH)
+ + j];
if (((gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK) ==
- ACPI_GPE_DISPATCH_METHOD)
- && (gpe_event_info->flags & ACPI_GPE_TYPE_RUNTIME)) {
+ ACPI_GPE_DISPATCH_METHOD) &&
+ (gpe_event_info->flags & ACPI_GPE_TYPE_RUNTIME)) {
gpe_enabled_count++;
}
@@ -1105,8 +1102,8 @@
/*
* Initialize the GPE Block(s) defined in the FADT
*
- * Why the GPE register block lengths are divided by 2: From the ACPI Spec,
- * section "General-Purpose Event Registers", we have:
+ * Why the GPE register block lengths are divided by 2: From the ACPI
+ * Spec, section "General-Purpose Event Registers", we have:
*
* "Each register block contains two registers of equal length
* GPEx_STS and GPEx_EN (where x is 0 or 1). The length of the
@@ -1163,7 +1160,8 @@
if ((register_count0) &&
(gpe_number_max >= acpi_gbl_FADT.gpe1_base)) {
ACPI_ERROR((AE_INFO,
- "GPE0 block (GPE 0 to %d) overlaps the GPE1 block (GPE %d to %d) - Ignoring GPE1",
+ "GPE0 block (GPE 0 to %d) overlaps the GPE1 block "
+ "(GPE %d to %d) - Ignoring GPE1",
gpe_number_max, acpi_gbl_FADT.gpe1_base,
acpi_gbl_FADT.gpe1_base +
((register_count1 *