Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:
drivers/net/benet/be_cmds.h
include/linux/sysctl.h
diff --git a/drivers/net/benet/be.h b/drivers/net/benet/be.h
index 9e56014..9fd8e5e 100644
--- a/drivers/net/benet/be.h
+++ b/drivers/net/benet/be.h
@@ -275,6 +275,7 @@
u32 tx_fc; /* Tx flow control */
int link_speed;
u8 port_type;
+ u8 transceiver;
};
extern const struct ethtool_ops be_ethtool_ops;
diff --git a/drivers/net/benet/be_cmds.c b/drivers/net/benet/be_cmds.c
index b748c19..7f64d56 100644
--- a/drivers/net/benet/be_cmds.c
+++ b/drivers/net/benet/be_cmds.c
@@ -1479,6 +1479,41 @@
return status;
}
+int be_cmd_set_loopback(struct be_adapter *adapter, u8 port_num,
+ u8 loopback_type, u8 enable)
+{
+ struct be_mcc_wrb *wrb;
+ struct be_cmd_req_set_lmode *req;
+ int status;
+
+ spin_lock_bh(&adapter->mcc_lock);
+
+ wrb = wrb_from_mccq(adapter);
+ if (!wrb) {
+ status = -EBUSY;
+ goto err;
+ }
+
+ req = embedded_payload(wrb);
+
+ be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0,
+ OPCODE_LOWLEVEL_SET_LOOPBACK_MODE);
+
+ be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_LOWLEVEL,
+ OPCODE_LOWLEVEL_SET_LOOPBACK_MODE,
+ sizeof(*req));
+
+ req->src_port = port_num;
+ req->dest_port = port_num;
+ req->loopback_type = loopback_type;
+ req->loopback_state = enable;
+
+ status = be_mcc_notify_wait(adapter);
+err:
+ spin_unlock_bh(&adapter->mcc_lock);
+ return status;
+}
+
int be_cmd_loopback_test(struct be_adapter *adapter, u32 port_num,
u32 loopback_type, u32 pkt_size, u32 num_pkts, u64 pattern)
{
@@ -1501,6 +1536,7 @@
be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_LOWLEVEL,
OPCODE_LOWLEVEL_LOOPBACK_TEST, sizeof(*req));
+ req->hdr.timeout = 4;
req->pattern = cpu_to_le64(pattern);
req->src_port = cpu_to_le32(port_num);
diff --git a/drivers/net/benet/be_cmds.h b/drivers/net/benet/be_cmds.h
index 6eed512..cb3188f 100644
--- a/drivers/net/benet/be_cmds.h
+++ b/drivers/net/benet/be_cmds.h
@@ -156,6 +156,7 @@
#define OPCODE_LOWLEVEL_HOST_DDR_DMA 17
#define OPCODE_LOWLEVEL_LOOPBACK_TEST 18
+#define OPCODE_LOWLEVEL_SET_LOOPBACK_MODE 19
struct be_cmd_req_hdr {
u8 opcode; /* dword 0 */
@@ -822,6 +823,19 @@
u32 ticks_compl;
};
+struct be_cmd_req_set_lmode {
+ struct be_cmd_req_hdr hdr;
+ u8 src_port;
+ u8 dest_port;
+ u8 loopback_type;
+ u8 loopback_state;
+};
+
+struct be_cmd_resp_set_lmode {
+ struct be_cmd_resp_hdr resp_hdr;
+ u8 rsvd0[4];
+};
+
/********************** DDR DMA test *********************/
struct be_cmd_req_ddrdma_test {
struct be_cmd_req_hdr hdr;
@@ -928,3 +942,6 @@
u32 byte_cnt, struct be_dma_mem *cmd);
extern int be_cmd_get_seeprom_data(struct be_adapter *adapter,
struct be_dma_mem *nonemb_cmd);
+extern int be_cmd_set_loopback(struct be_adapter *adapter, u8 port_num,
+ u8 loopback_type, u8 enable);
+
diff --git a/drivers/net/benet/be_ethtool.c b/drivers/net/benet/be_ethtool.c
index c5afc02..f18c02f 100644
--- a/drivers/net/benet/be_ethtool.c
+++ b/drivers/net/benet/be_ethtool.c
@@ -118,6 +118,7 @@
#define BE_MAC_LOOPBACK 0x0
#define BE_PHY_LOOPBACK 0x1
#define BE_ONE_PORT_EXT_LOOPBACK 0x2
+#define BE_NO_LOOPBACK 0xff
static void
be_get_drvinfo(struct net_device *netdev, struct ethtool_drvinfo *drvinfo)
@@ -339,28 +340,50 @@
status = be_cmd_read_port_type(adapter, adapter->port_num,
&connector);
- switch (connector) {
- case 7:
- ecmd->port = PORT_FIBRE;
- break;
- default:
- ecmd->port = PORT_TP;
- break;
+ if (!status) {
+ switch (connector) {
+ case 7:
+ ecmd->port = PORT_FIBRE;
+ ecmd->transceiver = XCVR_EXTERNAL;
+ break;
+ case 0:
+ ecmd->port = PORT_TP;
+ ecmd->transceiver = XCVR_EXTERNAL;
+ break;
+ default:
+ ecmd->port = PORT_TP;
+ ecmd->transceiver = XCVR_INTERNAL;
+ break;
+ }
+ } else {
+ ecmd->port = PORT_AUI;
+ ecmd->transceiver = XCVR_INTERNAL;
}
/* Save for future use */
adapter->link_speed = ecmd->speed;
adapter->port_type = ecmd->port;
+ adapter->transceiver = ecmd->transceiver;
} else {
ecmd->speed = adapter->link_speed;
ecmd->port = adapter->port_type;
+ ecmd->transceiver = adapter->transceiver;
}
ecmd->duplex = DUPLEX_FULL;
ecmd->autoneg = AUTONEG_DISABLE;
- ecmd->supported = (SUPPORTED_10000baseT_Full | SUPPORTED_TP);
ecmd->phy_address = adapter->port_num;
- ecmd->transceiver = XCVR_INTERNAL;
+ switch (ecmd->port) {
+ case PORT_FIBRE:
+ ecmd->supported = (SUPPORTED_10000baseT_Full | SUPPORTED_FIBRE);
+ break;
+ case PORT_TP:
+ ecmd->supported = (SUPPORTED_10000baseT_Full | SUPPORTED_TP);
+ break;
+ case PORT_AUI:
+ ecmd->supported = (SUPPORTED_10000baseT_Full | SUPPORTED_AUI);
+ break;
+ }
return 0;
}
@@ -489,6 +512,19 @@
return ret;
}
+static u64 be_loopback_test(struct be_adapter *adapter, u8 loopback_type,
+ u64 *status)
+{
+ be_cmd_set_loopback(adapter, adapter->port_num,
+ loopback_type, 1);
+ *status = be_cmd_loopback_test(adapter, adapter->port_num,
+ loopback_type, 1500,
+ 2, 0xabc);
+ be_cmd_set_loopback(adapter, adapter->port_num,
+ BE_NO_LOOPBACK, 1);
+ return *status;
+}
+
static void
be_self_test(struct net_device *netdev, struct ethtool_test *test, u64 *data)
{
@@ -497,23 +533,18 @@
memset(data, 0, sizeof(u64) * ETHTOOL_TESTS_NUM);
if (test->flags & ETH_TEST_FL_OFFLINE) {
- data[0] = be_cmd_loopback_test(adapter, adapter->port_num,
- BE_MAC_LOOPBACK, 1500,
- 2, 0xabc);
- if (data[0] != 0)
+ if (be_loopback_test(adapter, BE_MAC_LOOPBACK,
+ &data[0]) != 0) {
test->flags |= ETH_TEST_FL_FAILED;
-
- data[1] = be_cmd_loopback_test(adapter, adapter->port_num,
- BE_PHY_LOOPBACK, 1500,
- 2, 0xabc);
- if (data[1] != 0)
+ }
+ if (be_loopback_test(adapter, BE_PHY_LOOPBACK,
+ &data[1]) != 0) {
test->flags |= ETH_TEST_FL_FAILED;
-
- data[2] = be_cmd_loopback_test(adapter, adapter->port_num,
- BE_ONE_PORT_EXT_LOOPBACK,
- 1500, 2, 0xabc);
- if (data[2] != 0)
+ }
+ if (be_loopback_test(adapter, BE_ONE_PORT_EXT_LOOPBACK,
+ &data[2]) != 0) {
test->flags |= ETH_TEST_FL_FAILED;
+ }
data[3] = be_test_ddr_dma(adapter);
if (data[3] != 0)