V4L/DVB (3599b): Whitespace cleanups under drivers/media
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
diff --git a/drivers/media/video/pwc/pwc-ioctl.h b/drivers/media/video/pwc/pwc-ioctl.h
index 5f9cb08..784bc72 100644
--- a/drivers/media/video/pwc/pwc-ioctl.h
+++ b/drivers/media/video/pwc/pwc-ioctl.h
@@ -33,10 +33,10 @@
/*
Changes
2001/08/03 Alvarado Added ioctl constants to access methods for
- changing white balance and red/blue gains
+ changing white balance and red/blue gains
2002/12/15 G. H. Fernandez-Toribio VIDIOCGREALSIZE
2003/12/13 Nemosft Unv. Some modifications to make interfacing to
- PWCX easier
+ PWCX easier
*/
/* These are private ioctl() commands, specific for the Philips webcams.
@@ -45,10 +45,10 @@
The #define names are built up like follows:
VIDIOC VIDeo IOCtl prefix
- PWC Philps WebCam
- G optional: Get
- S optional: Set
- ... the function
+ PWC Philps WebCam
+ G optional: Get
+ S optional: Set
+ ... the function
*/
@@ -94,7 +94,7 @@
{
char serial[30]; /* String with serial number. Contains terminating 0 */
};
-
+
/* pwc_whitebalance.mode values */
#define PWC_WB_INDOOR 0
#define PWC_WB_OUTDOOR 1
@@ -102,14 +102,14 @@
#define PWC_WB_MANUAL 3
#define PWC_WB_AUTO 4
-/* Used with VIDIOCPWC[SG]AWB (Auto White Balance).
+/* Used with VIDIOCPWC[SG]AWB (Auto White Balance).
Set mode to one of the PWC_WB_* values above.
- *red and *blue are the respective gains of these colour components inside
+ *red and *blue are the respective gains of these colour components inside
the camera; range 0..65535
- When 'mode' == PWC_WB_MANUAL, 'manual_red' and 'manual_blue' are set or read;
+ When 'mode' == PWC_WB_MANUAL, 'manual_red' and 'manual_blue' are set or read;
otherwise undefined.
'read_red' and 'read_blue' are read-only.
-*/
+*/
struct pwc_whitebalance
{
int mode;
@@ -117,9 +117,9 @@
int read_red, read_blue; /* R/O */
};
-/*
+/*
'control_speed' and 'control_delay' are used in automatic whitebalance mode,
- and tell the camera how fast it should react to changes in lighting, and
+ and tell the camera how fast it should react to changes in lighting, and
with how much delay. Valid values are 0..65535.
*/
struct pwc_wb_speed
@@ -148,11 +148,11 @@
#define PWC_MPT_TILT 0x02
#define PWC_MPT_TIMEOUT 0x04 /* for status */
-/* Set angles; when absolute != 0, the angle is absolute and the
+/* Set angles; when absolute != 0, the angle is absolute and the
driver calculates the relative offset for you. This can only
be used with VIDIOCPWCSANGLE; VIDIOCPWCGANGLE always returns
absolute angles.
- */
+ */
struct pwc_mpt_angles
{
int absolute; /* write-only */
@@ -179,14 +179,14 @@
/* This is used for out-of-kernel decompression. With it, you can get
all the necessary information to initialize and use the decompressor
routines in standalone applications.
- */
+ */
struct pwc_video_command
{
int type; /* camera type (645, 675, 730, etc.) */
int release; /* release number */
- int size; /* one of PSZ_* */
- int alternate;
+ int size; /* one of PSZ_* */
+ int alternate;
int command_len; /* length of USB video command */
unsigned char command_buf[13]; /* Actual USB video command */
int bandlength; /* >0 = compressed */
@@ -264,7 +264,7 @@
/* Flickerless mode; = 0 off, otherwise on */
#define VIDIOCPWCSFLICKER _IOW('v', 208, int)
-#define VIDIOCPWCGFLICKER _IOR('v', 208, int)
+#define VIDIOCPWCGFLICKER _IOR('v', 208, int)
/* Dynamic noise reduction; 0 off, 3 = high noise reduction */
#define VIDIOCPWCSDYNNOISE _IOW('v', 209, int)
@@ -273,7 +273,7 @@
/* Real image size as used by the camera; tells you whether or not there's a gray border around the image */
#define VIDIOCPWCGREALSIZE _IOR('v', 210, struct pwc_imagesize)
- /* Motorized pan & tilt functions */
+ /* Motorized pan & tilt functions */
#define VIDIOCPWCMPTRESET _IOW('v', 211, int)
#define VIDIOCPWCMPTGRANGE _IOR('v', 211, struct pwc_mpt_range)
#define VIDIOCPWCMPTSANGLE _IOW('v', 212, struct pwc_mpt_angles)