[PATCH] dvb: usb: add supprt for WideView WT-220U
Add support and rewrote some parts with the help of vendor information
(Thanks to Steve Chang from WideView, Inc.):
o added support for the WT-220U (Pensize DVB-T receiver)
o corrected byte order for unc,ber and the pid filter
o corrected number of pids that can be fetched at the same time.
o added some comments in Kconfig-file
o added USB IDs for the WT-220U
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
diff --git a/drivers/media/dvb/dvb-usb/dtt200u.h b/drivers/media/dvb/dvb-usb/dtt200u.h
index 9ab081a..6f1f304 100644
--- a/drivers/media/dvb/dvb-usb/dtt200u.h
+++ b/drivers/media/dvb/dvb-usb/dtt200u.h
@@ -22,44 +22,34 @@
/* guessed protocol description (reverse engineered):
* read
* 00 - USB type 0x02 for usb2.0, 0x01 for usb1.1
- * 81 - <TS_LOCK> <current frequency divided by 250000>
- * 82 - crash - do not touch
- * 83 - crash - do not touch
- * 84 - remote control
- * 85 - crash - do not touch (OK, stop testing here)
* 88 - locking 2 bytes (0x80 0x40 == no signal, 0x89 0x20 == nice signal)
- * 89 - noise-to-signal
- * 8a - unkown 1 byte - signal_strength
- * 8c - ber ???
- * 8d - ber
- * 8e - unc
*/
-#define GET_SPEED 0x00
-#define GET_TUNE_STAT 0x81
-#define GET_RC_KEY 0x84
-#define GET_STATUS 0x88
-#define GET_SNR 0x89
-#define GET_SIG_STRENGTH 0x8a
-#define GET_UNK 0x8c
-#define GET_BER 0x8d
-#define GET_UNC 0x8e
+#define GET_SPEED 0x00
+#define GET_TUNE_STATUS 0x81
+#define GET_RC_CODE 0x84
+#define GET_CONFIGURATION 0x88
+#define GET_AGC 0x89
+#define GET_SNR 0x8a
+#define GET_VIT_ERR_CNT 0x8c
+#define GET_RS_ERR_CNT 0x8d
+#define GET_RS_UNCOR_BLK_CNT 0x8e
/* write
- * 01 - reset the demod
+ * 01 - init
* 02 - frequency (divided by 250000)
* 03 - bandwidth
* 04 - pid table (index pid(7:0) pid(12:8))
* 05 - reset the pid table
- * 08 - demod transfer enabled or not (FX2 transfer is enabled by default)
+ * 08 - transfer switch
*/
-#define RESET_DEMOD 0x01
-#define SET_FREQUENCY 0x02
+#define SET_INIT 0x01
+#define SET_RF_FREQ 0x02
#define SET_BANDWIDTH 0x03
#define SET_PID_FILTER 0x04
#define RESET_PID_FILTER 0x05
-#define SET_TS_CTRL 0x08
+#define SET_STREAMING 0x08
extern struct dvb_frontend * dtt200u_fe_attach(struct dvb_usb_device *d);