| #ifndef _LINUX_SCATTERLIST_H | 
 | #define _LINUX_SCATTERLIST_H | 
 |  | 
 | #include <asm/types.h> | 
 | #include <asm/scatterlist.h> | 
 | #include <linux/mm.h> | 
 | #include <linux/string.h> | 
 | #include <asm/io.h> | 
 |  | 
 | struct sg_table { | 
 | 	struct scatterlist *sgl;	/* the list */ | 
 | 	unsigned int nents;		/* number of mapped entries */ | 
 | 	unsigned int orig_nents;	/* original size of list */ | 
 | }; | 
 |  | 
 | /* | 
 |  * Notes on SG table design. | 
 |  * | 
 |  * Architectures must provide an unsigned long page_link field in the | 
 |  * scatterlist struct. We use that to place the page pointer AND encode | 
 |  * information about the sg table as well. The two lower bits are reserved | 
 |  * for this information. | 
 |  * | 
 |  * If bit 0 is set, then the page_link contains a pointer to the next sg | 
 |  * table list. Otherwise the next entry is at sg + 1. | 
 |  * | 
 |  * If bit 1 is set, then this sg entry is the last element in a list. | 
 |  * | 
 |  * See sg_next(). | 
 |  * | 
 |  */ | 
 |  | 
 | #define SG_MAGIC	0x87654321 | 
 |  | 
 | /* | 
 |  * We overload the LSB of the page pointer to indicate whether it's | 
 |  * a valid sg entry, or whether it points to the start of a new scatterlist. | 
 |  * Those low bits are there for everyone! (thanks mason :-) | 
 |  */ | 
 | #define sg_is_chain(sg)		((sg)->page_link & 0x01) | 
 | #define sg_is_last(sg)		((sg)->page_link & 0x02) | 
 | #define sg_chain_ptr(sg)	\ | 
 | 	((struct scatterlist *) ((sg)->page_link & ~0x03)) | 
 |  | 
 | /** | 
 |  * sg_assign_page - Assign a given page to an SG entry | 
 |  * @sg:		    SG entry | 
 |  * @page:	    The page | 
 |  * | 
 |  * Description: | 
 |  *   Assign page to sg entry. Also see sg_set_page(), the most commonly used | 
 |  *   variant. | 
 |  * | 
 |  **/ | 
 | static inline void sg_assign_page(struct scatterlist *sg, struct page *page) | 
 | { | 
 | 	unsigned long page_link = sg->page_link & 0x3; | 
 |  | 
 | 	/* | 
 | 	 * In order for the low bit stealing approach to work, pages | 
 | 	 * must be aligned at a 32-bit boundary as a minimum. | 
 | 	 */ | 
 | 	BUG_ON((unsigned long) page & 0x03); | 
 | #ifdef CONFIG_DEBUG_SG | 
 | 	BUG_ON(sg->sg_magic != SG_MAGIC); | 
 | 	BUG_ON(sg_is_chain(sg)); | 
 | #endif | 
 | 	sg->page_link = page_link | (unsigned long) page; | 
 | } | 
 |  | 
 | /** | 
 |  * sg_set_page - Set sg entry to point at given page | 
 |  * @sg:		 SG entry | 
 |  * @page:	 The page | 
 |  * @len:	 Length of data | 
 |  * @offset:	 Offset into page | 
 |  * | 
 |  * Description: | 
 |  *   Use this function to set an sg entry pointing at a page, never assign | 
 |  *   the page directly. We encode sg table information in the lower bits | 
 |  *   of the page pointer. See sg_page() for looking up the page belonging | 
 |  *   to an sg entry. | 
 |  * | 
 |  **/ | 
 | static inline void sg_set_page(struct scatterlist *sg, struct page *page, | 
 | 			       unsigned int len, unsigned int offset) | 
 | { | 
 | 	sg_assign_page(sg, page); | 
 | 	sg->offset = offset; | 
 | 	sg->length = len; | 
 | } | 
 |  | 
 | static inline struct page *sg_page(struct scatterlist *sg) | 
 | { | 
 | #ifdef CONFIG_DEBUG_SG | 
 | 	BUG_ON(sg->sg_magic != SG_MAGIC); | 
 | 	BUG_ON(sg_is_chain(sg)); | 
 | #endif | 
 | 	return (struct page *)((sg)->page_link & ~0x3); | 
 | } | 
 |  | 
 | /** | 
 |  * sg_set_buf - Set sg entry to point at given data | 
 |  * @sg:		 SG entry | 
 |  * @buf:	 Data | 
 |  * @buflen:	 Data length | 
 |  * | 
 |  **/ | 
 | static inline void sg_set_buf(struct scatterlist *sg, const void *buf, | 
 | 			      unsigned int buflen) | 
 | { | 
 | 	sg_set_page(sg, virt_to_page(buf), buflen, offset_in_page(buf)); | 
 | } | 
 |  | 
 | /* | 
 |  * Loop over each sg element, following the pointer to a new list if necessary | 
 |  */ | 
 | #define for_each_sg(sglist, sg, nr, __i)	\ | 
 | 	for (__i = 0, sg = (sglist); __i < (nr); __i++, sg = sg_next(sg)) | 
 |  | 
 | /** | 
 |  * sg_chain - Chain two sglists together | 
 |  * @prv:	First scatterlist | 
 |  * @prv_nents:	Number of entries in prv | 
 |  * @sgl:	Second scatterlist | 
 |  * | 
 |  * Description: | 
 |  *   Links @prv@ and @sgl@ together, to form a longer scatterlist. | 
 |  * | 
 |  **/ | 
 | static inline void sg_chain(struct scatterlist *prv, unsigned int prv_nents, | 
 | 			    struct scatterlist *sgl) | 
 | { | 
 | #ifndef ARCH_HAS_SG_CHAIN | 
 | 	BUG(); | 
 | #endif | 
 |  | 
 | 	/* | 
 | 	 * offset and length are unused for chain entry.  Clear them. | 
 | 	 */ | 
 | 	prv[prv_nents - 1].offset = 0; | 
 | 	prv[prv_nents - 1].length = 0; | 
 |  | 
 | 	/* | 
 | 	 * Set lowest bit to indicate a link pointer, and make sure to clear | 
 | 	 * the termination bit if it happens to be set. | 
 | 	 */ | 
 | 	prv[prv_nents - 1].page_link = ((unsigned long) sgl | 0x01) & ~0x02; | 
 | } | 
 |  | 
 | /** | 
 |  * sg_mark_end - Mark the end of the scatterlist | 
 |  * @sg:		 SG entryScatterlist | 
 |  * | 
 |  * Description: | 
 |  *   Marks the passed in sg entry as the termination point for the sg | 
 |  *   table. A call to sg_next() on this entry will return NULL. | 
 |  * | 
 |  **/ | 
 | static inline void sg_mark_end(struct scatterlist *sg) | 
 | { | 
 | #ifdef CONFIG_DEBUG_SG | 
 | 	BUG_ON(sg->sg_magic != SG_MAGIC); | 
 | #endif | 
 | 	/* | 
 | 	 * Set termination bit, clear potential chain bit | 
 | 	 */ | 
 | 	sg->page_link |= 0x02; | 
 | 	sg->page_link &= ~0x01; | 
 | } | 
 |  | 
 | /** | 
 |  * sg_phys - Return physical address of an sg entry | 
 |  * @sg:	     SG entry | 
 |  * | 
 |  * Description: | 
 |  *   This calls page_to_phys() on the page in this sg entry, and adds the | 
 |  *   sg offset. The caller must know that it is legal to call page_to_phys() | 
 |  *   on the sg page. | 
 |  * | 
 |  **/ | 
 | static inline dma_addr_t sg_phys(struct scatterlist *sg) | 
 | { | 
 | 	return page_to_phys(sg_page(sg)) + sg->offset; | 
 | } | 
 |  | 
 | /** | 
 |  * sg_virt - Return virtual address of an sg entry | 
 |  * @sg:      SG entry | 
 |  * | 
 |  * Description: | 
 |  *   This calls page_address() on the page in this sg entry, and adds the | 
 |  *   sg offset. The caller must know that the sg page has a valid virtual | 
 |  *   mapping. | 
 |  * | 
 |  **/ | 
 | static inline void *sg_virt(struct scatterlist *sg) | 
 | { | 
 | 	return page_address(sg_page(sg)) + sg->offset; | 
 | } | 
 |  | 
 | struct scatterlist *sg_next(struct scatterlist *); | 
 | struct scatterlist *sg_last(struct scatterlist *s, unsigned int); | 
 | void sg_init_table(struct scatterlist *, unsigned int); | 
 | void sg_init_one(struct scatterlist *, const void *, unsigned int); | 
 |  | 
 | typedef struct scatterlist *(sg_alloc_fn)(unsigned int, gfp_t); | 
 | typedef void (sg_free_fn)(struct scatterlist *, unsigned int); | 
 |  | 
 | void __sg_free_table(struct sg_table *, unsigned int, sg_free_fn *); | 
 | void sg_free_table(struct sg_table *); | 
 | int __sg_alloc_table(struct sg_table *, unsigned int, unsigned int, gfp_t, | 
 | 		     sg_alloc_fn *); | 
 | int sg_alloc_table(struct sg_table *, unsigned int, gfp_t); | 
 |  | 
 | size_t sg_copy_from_buffer(struct scatterlist *sgl, unsigned int nents, | 
 | 			   void *buf, size_t buflen); | 
 | size_t sg_copy_to_buffer(struct scatterlist *sgl, unsigned int nents, | 
 | 			 void *buf, size_t buflen); | 
 |  | 
 | /* | 
 |  * Maximum number of entries that will be allocated in one piece, if | 
 |  * a list larger than this is required then chaining will be utilized. | 
 |  */ | 
 | #define SG_MAX_SINGLE_ALLOC		(PAGE_SIZE / sizeof(struct scatterlist)) | 
 |  | 
 |  | 
 | /* | 
 |  * Mapping sg iterator | 
 |  * | 
 |  * Iterates over sg entries mapping page-by-page.  On each successful | 
 |  * iteration, @miter->page points to the mapped page and | 
 |  * @miter->length bytes of data can be accessed at @miter->addr.  As | 
 |  * long as an interation is enclosed between start and stop, the user | 
 |  * is free to choose control structure and when to stop. | 
 |  * | 
 |  * @miter->consumed is set to @miter->length on each iteration.  It | 
 |  * can be adjusted if the user can't consume all the bytes in one go. | 
 |  * Also, a stopped iteration can be resumed by calling next on it. | 
 |  * This is useful when iteration needs to release all resources and | 
 |  * continue later (e.g. at the next interrupt). | 
 |  */ | 
 |  | 
 | #define SG_MITER_ATOMIC		(1 << 0)	 /* use kmap_atomic */ | 
 |  | 
 | struct sg_mapping_iter { | 
 | 	/* the following three fields can be accessed directly */ | 
 | 	struct page		*page;		/* currently mapped page */ | 
 | 	void			*addr;		/* pointer to the mapped area */ | 
 | 	size_t			length;		/* length of the mapped area */ | 
 | 	size_t			consumed;	/* number of consumed bytes */ | 
 |  | 
 | 	/* these are internal states, keep away */ | 
 | 	struct scatterlist	*__sg;		/* current entry */ | 
 | 	unsigned int		__nents;	/* nr of remaining entries */ | 
 | 	unsigned int		__offset;	/* offset within sg */ | 
 | 	unsigned int		__flags; | 
 | }; | 
 |  | 
 | void sg_miter_start(struct sg_mapping_iter *miter, struct scatterlist *sgl, | 
 | 		    unsigned int nents, unsigned int flags); | 
 | bool sg_miter_next(struct sg_mapping_iter *miter); | 
 | void sg_miter_stop(struct sg_mapping_iter *miter); | 
 |  | 
 | #endif /* _LINUX_SCATTERLIST_H */ |