[SPARC64]: Detect sun4v early in boot process.
We look for "SUNW,sun4v" in the 'compatible' property
of the root OBP device tree node.
Protect every %ver register access, to make sure it is
not touched on sun4v, as %ver is hyperprivileged there.
Lock kernel TLB entries using hypervisor calls instead of
calls into OBP.
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/arch/sparc64/kernel/irq.c b/arch/sparc64/kernel/irq.c
index c80d253..1f64555 100644
--- a/arch/sparc64/kernel/irq.c
+++ b/arch/sparc64/kernel/irq.c
@@ -150,47 +150,53 @@
preempt_disable();
- if (tlb_type == cheetah || tlb_type == cheetah_plus) {
- unsigned long ver;
-
- __asm__ ("rdpr %%ver, %0" : "=r" (ver));
- if ((ver >> 32) == __JALAPENO_ID ||
- (ver >> 32) == __SERRANO_ID) {
- /* We set it to our JBUS ID. */
- __asm__ __volatile__("ldxa [%%g0] %1, %0"
- : "=r" (tid)
- : "i" (ASI_JBUS_CONFIG));
- tid = ((tid & (0x1fUL<<17)) << 9);
- tid &= IMAP_TID_JBUS;
- } else {
- /* We set it to our Safari AID. */
- __asm__ __volatile__("ldxa [%%g0] %1, %0"
- : "=r" (tid)
- : "i" (ASI_SAFARI_CONFIG));
- tid = ((tid & (0x3ffUL<<17)) << 9);
- tid &= IMAP_AID_SAFARI;
- }
- } else if (this_is_starfire == 0) {
- /* We set it to our UPA MID. */
- __asm__ __volatile__("ldxa [%%g0] %1, %0"
- : "=r" (tid)
- : "i" (ASI_UPA_CONFIG));
- tid = ((tid & UPA_CONFIG_MID) << 9);
- tid &= IMAP_TID_UPA;
+ if (tlb_type == hypervisor) {
+ /* XXX SUN4V: implement me... XXX */
} else {
- tid = (starfire_translate(imap, smp_processor_id()) << 26);
- tid &= IMAP_TID_UPA;
- }
+ if (tlb_type == cheetah || tlb_type == cheetah_plus) {
+ unsigned long ver;
- /* NOTE NOTE NOTE, IGN and INO are read-only, IGN is a product
- * of this SYSIO's preconfigured IGN in the SYSIO Control
- * Register, the hardware just mirrors that value here.
- * However for Graphics and UPA Slave devices the full
- * IMAP_INR field can be set by the programmer here.
- *
- * Things like FFB can now be handled via the new IRQ mechanism.
- */
- upa_writel(tid | IMAP_VALID, imap);
+ __asm__ ("rdpr %%ver, %0" : "=r" (ver));
+ if ((ver >> 32) == __JALAPENO_ID ||
+ (ver >> 32) == __SERRANO_ID) {
+ /* We set it to our JBUS ID. */
+ __asm__ __volatile__("ldxa [%%g0] %1, %0"
+ : "=r" (tid)
+ : "i" (ASI_JBUS_CONFIG));
+ tid = ((tid & (0x1fUL<<17)) << 9);
+ tid &= IMAP_TID_JBUS;
+ } else {
+ /* We set it to our Safari AID. */
+ __asm__ __volatile__("ldxa [%%g0] %1, %0"
+ : "=r" (tid)
+ : "i"(ASI_SAFARI_CONFIG));
+ tid = ((tid & (0x3ffUL<<17)) << 9);
+ tid &= IMAP_AID_SAFARI;
+ }
+ } else if (this_is_starfire == 0) {
+ /* We set it to our UPA MID. */
+ __asm__ __volatile__("ldxa [%%g0] %1, %0"
+ : "=r" (tid)
+ : "i" (ASI_UPA_CONFIG));
+ tid = ((tid & UPA_CONFIG_MID) << 9);
+ tid &= IMAP_TID_UPA;
+ } else {
+ tid = (starfire_translate(imap,
+ smp_processor_id()) << 26);
+ tid &= IMAP_TID_UPA;
+ }
+
+ /* NOTE NOTE NOTE, IGN and INO are read-only, IGN is a product
+ * of this SYSIO's preconfigured IGN in the SYSIO Control
+ * Register, the hardware just mirrors that value here.
+ * However for Graphics and UPA Slave devices the full
+ * IMAP_INR field can be set by the programmer here.
+ *
+ * Things like FFB can now be handled via the new IRQ
+ * mechanism.
+ */
+ upa_writel(tid | IMAP_VALID, imap);
+ }
preempt_enable();
}