ath5k: Port to new bitrate/channel API
Author: Nick Kossifidis <mickflemm@gmail.com>
Tested on 5211, 5213+5112, 5213A+2112A and it wors fine.
Also i figured out a way to process rate vallue found
on status descriptors, it's still buggy but we are getting
closer (i think it improved stability a little).
Changes to hw.c, initvals.c, phy.c
Changes-licensed-under: ISC
Changes to ath5k.h, base.c, base.h
Changes-licensed-under: 3-Clause-BSD
Acked-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Nick Kossifidis <mickflemm@gmail.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@winlab.rutgers.edu>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/ath5k/ath5k.h b/drivers/net/wireless/ath5k/ath5k.h
index 69dea33..9ea8c54 100644
--- a/drivers/net/wireless/ath5k/ath5k.h
+++ b/drivers/net/wireless/ath5k/ath5k.h
@@ -30,7 +30,6 @@
#include <net/mac80211.h>
#include "hw.h"
-#include "regdom.h"
/* PCI IDs */
#define PCI_DEVICE_ID_ATHEROS_AR5210 0x0007 /* AR5210 */
@@ -251,18 +250,20 @@
*/
#define MODULATION_TURBO 0x00000080
-enum ath5k_vendor_mode {
- MODE_ATHEROS_TURBO = NUM_IEEE80211_MODES+1,
- MODE_ATHEROS_TURBOG
+enum ath5k_driver_mode {
+ AR5K_MODE_11A = 0,
+ AR5K_MODE_11A_TURBO = 1,
+ AR5K_MODE_11B = 2,
+ AR5K_MODE_11G = 3,
+ AR5K_MODE_11G_TURBO = 4,
+ AR5K_MODE_XR = 0,
+ AR5K_MODE_MAX = 5
};
-/* Number of supported mac80211 enum ieee80211_phymode modes by this driver */
-#define NUM_DRIVER_MODES 3
-
/* adding this flag to rate_code enables short preamble, see ar5212_reg.h */
#define AR5K_SET_SHORT_PREAMBLE 0x04
-#define HAS_SHPREAMBLE(_ix) (rt->rates[_ix].modulation == IEEE80211_RATE_CCK_2)
+#define HAS_SHPREAMBLE(_ix) (rt->rates[_ix].modulation == IEEE80211_RATE_SHORT_PREAMBLE)
#define SHPREAMBLE_FLAG(_ix) (HAS_SHPREAMBLE(_ix) ? AR5K_SET_SHORT_PREAMBLE : 0)
/****************\
@@ -560,8 +561,8 @@
* Used internaly in OpenHAL (ar5211.c/ar5212.c
* for reset_tx_queue). Also see struct struct ieee80211_channel.
*/
-#define IS_CHAN_XR(_c) ((_c.val & CHANNEL_XR) != 0)
-#define IS_CHAN_B(_c) ((_c.val & CHANNEL_B) != 0)
+#define IS_CHAN_XR(_c) ((_c.hw_value & CHANNEL_XR) != 0)
+#define IS_CHAN_B(_c) ((_c.hw_value & CHANNEL_B) != 0)
/*
* The following structure will be used to map 2GHz channels to
@@ -584,7 +585,7 @@
/**
* struct ath5k_rate - rate structure
- * @valid: is this a valid rate for the current mode
+ * @valid: is this a valid rate for rate control (remove)
* @modulation: respective mac80211 modulation
* @rate_kbps: rate in kbit/s
* @rate_code: hardware rate value, used in &struct ath5k_desc, on RX on
@@ -643,47 +644,48 @@
/*
* Rate tables...
+ * TODO: CLEAN THIS !!!
*/
#define AR5K_RATES_11A { 8, { \
255, 255, 255, 255, 255, 255, 255, 255, 6, 4, 2, 0, \
7, 5, 3, 1, 255, 255, 255, 255, 255, 255, 255, 255, \
255, 255, 255, 255, 255, 255, 255, 255 }, { \
- { 1, IEEE80211_RATE_OFDM, 6000, 11, 140, 0 }, \
- { 1, IEEE80211_RATE_OFDM, 9000, 15, 18, 0 }, \
- { 1, IEEE80211_RATE_OFDM, 12000, 10, 152, 2 }, \
- { 1, IEEE80211_RATE_OFDM, 18000, 14, 36, 2 }, \
- { 1, IEEE80211_RATE_OFDM, 24000, 9, 176, 4 }, \
- { 1, IEEE80211_RATE_OFDM, 36000, 13, 72, 4 }, \
- { 1, IEEE80211_RATE_OFDM, 48000, 8, 96, 4 }, \
- { 1, IEEE80211_RATE_OFDM, 54000, 12, 108, 4 } } \
+ { 1, 0, 6000, 11, 140, 0 }, \
+ { 1, 0, 9000, 15, 18, 0 }, \
+ { 1, 0, 12000, 10, 152, 2 }, \
+ { 1, 0, 18000, 14, 36, 2 }, \
+ { 1, 0, 24000, 9, 176, 4 }, \
+ { 1, 0, 36000, 13, 72, 4 }, \
+ { 1, 0, 48000, 8, 96, 4 }, \
+ { 1, 0, 54000, 12, 108, 4 } } \
}
#define AR5K_RATES_11B { 4, { \
255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, \
255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, \
3, 2, 1, 0, 255, 255, 255, 255 }, { \
- { 1, IEEE80211_RATE_CCK, 1000, 27, 130, 0 }, \
- { 1, IEEE80211_RATE_CCK_2, 2000, 26, 132, 1 }, \
- { 1, IEEE80211_RATE_CCK_2, 5500, 25, 139, 1 }, \
- { 1, IEEE80211_RATE_CCK_2, 11000, 24, 150, 1 } } \
+ { 1, 0, 1000, 27, 130, 0 }, \
+ { 1, IEEE80211_RATE_SHORT_PREAMBLE, 2000, 26, 132, 1 }, \
+ { 1, IEEE80211_RATE_SHORT_PREAMBLE, 5500, 25, 139, 1 }, \
+ { 1, IEEE80211_RATE_SHORT_PREAMBLE, 11000, 24, 150, 1 } } \
}
#define AR5K_RATES_11G { 12, { \
255, 255, 255, 255, 255, 255, 255, 255, 10, 8, 6, 4, \
11, 9, 7, 5, 255, 255, 255, 255, 255, 255, 255, 255, \
3, 2, 1, 0, 255, 255, 255, 255 }, { \
- { 1, IEEE80211_RATE_CCK, 1000, 27, 2, 0 }, \
- { 1, IEEE80211_RATE_CCK_2, 2000, 26, 4, 1 }, \
- { 1, IEEE80211_RATE_CCK_2, 5500, 25, 11, 1 }, \
- { 1, IEEE80211_RATE_CCK_2, 11000, 24, 22, 1 }, \
- { 0, IEEE80211_RATE_OFDM, 6000, 11, 12, 4 }, \
- { 0, IEEE80211_RATE_OFDM, 9000, 15, 18, 4 }, \
- { 1, IEEE80211_RATE_OFDM, 12000, 10, 24, 6 }, \
- { 1, IEEE80211_RATE_OFDM, 18000, 14, 36, 6 }, \
- { 1, IEEE80211_RATE_OFDM, 24000, 9, 48, 8 }, \
- { 1, IEEE80211_RATE_OFDM, 36000, 13, 72, 8 }, \
- { 1, IEEE80211_RATE_OFDM, 48000, 8, 96, 8 }, \
- { 1, IEEE80211_RATE_OFDM, 54000, 12, 108, 8 } } \
+ { 1, 0, 1000, 27, 2, 0 }, \
+ { 1, IEEE80211_RATE_SHORT_PREAMBLE, 2000, 26, 4, 1 }, \
+ { 1, IEEE80211_RATE_SHORT_PREAMBLE, 5500, 25, 11, 1 }, \
+ { 1, IEEE80211_RATE_SHORT_PREAMBLE, 11000, 24, 22, 1 }, \
+ { 0, 0, 6000, 11, 12, 4 }, \
+ { 0, 0, 9000, 15, 18, 4 }, \
+ { 1, 0, 12000, 10, 24, 6 }, \
+ { 1, 0, 18000, 14, 36, 6 }, \
+ { 1, 0, 24000, 9, 48, 8 }, \
+ { 1, 0, 36000, 13, 72, 8 }, \
+ { 1, 0, 48000, 8, 96, 8 }, \
+ { 1, 0, 54000, 12, 108, 8 } } \
}
#define AR5K_RATES_TURBO { 8, { \
@@ -708,14 +710,14 @@
{ 1, MODULATION_XR, 1000, 2, 139, 1 }, \
{ 1, MODULATION_XR, 2000, 6, 150, 2 }, \
{ 1, MODULATION_XR, 3000, 1, 150, 3 }, \
- { 1, IEEE80211_RATE_OFDM, 6000, 11, 140, 4 }, \
- { 1, IEEE80211_RATE_OFDM, 9000, 15, 18, 4 }, \
- { 1, IEEE80211_RATE_OFDM, 12000, 10, 152, 6 }, \
- { 1, IEEE80211_RATE_OFDM, 18000, 14, 36, 6 }, \
- { 1, IEEE80211_RATE_OFDM, 24000, 9, 176, 8 }, \
- { 1, IEEE80211_RATE_OFDM, 36000, 13, 72, 8 }, \
- { 1, IEEE80211_RATE_OFDM, 48000, 8, 96, 8 }, \
- { 1, IEEE80211_RATE_OFDM, 54000, 12, 108, 8 } } \
+ { 1, 0, 6000, 11, 140, 4 }, \
+ { 1, 0, 9000, 15, 18, 4 }, \
+ { 1, 0, 12000, 10, 152, 6 }, \
+ { 1, 0, 18000, 14, 36, 6 }, \
+ { 1, 0, 24000, 9, 176, 8 }, \
+ { 1, 0, 36000, 13, 72, 8 }, \
+ { 1, 0, 48000, 8, 96, 8 }, \
+ { 1, 0, 54000, 12, 108, 8 } } \
}
/*
@@ -895,7 +897,7 @@
* Supported PHY modes
* (ie. CHANNEL_A, CHANNEL_B, ...)
*/
- DECLARE_BITMAP(cap_mode, NUM_DRIVER_MODES);
+ DECLARE_BITMAP(cap_mode, AR5K_MODE_MAX);
/*
* Frequency range (without regulation restrictions)
@@ -908,14 +910,6 @@
} cap_range;
/*
- * Active regulation domain settings
- */
- struct {
- enum ath5k_regdom reg_current;
- enum ath5k_regdom reg_hw;
- } cap_regdomain;
-
- /*
* Values stored in the EEPROM (some of them...)
*/
struct ath5k_eeprom_info cap_eeprom;
@@ -1129,8 +1123,6 @@
extern u32 ath5k_hw_get_gpio(struct ath5k_hw *ah, u32 gpio);
extern int ath5k_hw_set_gpio(struct ath5k_hw *ah, u32 gpio, u32 val);
extern void ath5k_hw_set_gpio_intr(struct ath5k_hw *ah, unsigned int gpio, u32 interrupt_level);
-/* Regulatory Domain/Channels Setup */
-extern u16 ath5k_get_regdomain(struct ath5k_hw *ah);
/* Misc functions */
extern int ath5k_hw_get_capability(struct ath5k_hw *ah, enum ath5k_capability_type cap_type, u32 capability, u32 *result);