|  | /* | 
|  | Copyright (C) 2004 - 2007 rt2x00 SourceForge Project | 
|  | <http://rt2x00.serialmonkey.com> | 
|  |  | 
|  | This program is free software; you can redistribute it and/or modify | 
|  | it under the terms of the GNU General Public License as published by | 
|  | the Free Software Foundation; either version 2 of the License, or | 
|  | (at your option) any later version. | 
|  |  | 
|  | This program is distributed in the hope that it will be useful, | 
|  | but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | 
|  | GNU General Public License for more details. | 
|  |  | 
|  | You should have received a copy of the GNU General Public License | 
|  | along with this program; if not, write to the | 
|  | Free Software Foundation, Inc., | 
|  | 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. | 
|  | */ | 
|  |  | 
|  | /* | 
|  | Module: rt2x00usb | 
|  | Abstract: rt2x00 generic usb device routines. | 
|  | */ | 
|  |  | 
|  | /* | 
|  | * Set enviroment defines for rt2x00.h | 
|  | */ | 
|  | #define DRV_NAME "rt2x00usb" | 
|  |  | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/usb.h> | 
|  |  | 
|  | #include "rt2x00.h" | 
|  | #include "rt2x00usb.h" | 
|  |  | 
|  | /* | 
|  | * Interfacing with the HW. | 
|  | */ | 
|  | int rt2x00usb_vendor_request(const struct rt2x00_dev *rt2x00dev, | 
|  | const u8 request, const u8 requesttype, | 
|  | const u16 offset, const u16 value, | 
|  | void *buffer, const u16 buffer_length, | 
|  | const int timeout) | 
|  | { | 
|  | struct usb_device *usb_dev = | 
|  | interface_to_usbdev(rt2x00dev_usb(rt2x00dev)); | 
|  | int status; | 
|  | unsigned int i; | 
|  | unsigned int pipe = | 
|  | (requesttype == USB_VENDOR_REQUEST_IN) ? | 
|  | usb_rcvctrlpipe(usb_dev, 0) : usb_sndctrlpipe(usb_dev, 0); | 
|  |  | 
|  | for (i = 0; i < REGISTER_BUSY_COUNT; i++) { | 
|  | status = usb_control_msg(usb_dev, pipe, request, requesttype, | 
|  | value, offset, buffer, buffer_length, | 
|  | timeout); | 
|  | if (status >= 0) | 
|  | return 0; | 
|  |  | 
|  | /* | 
|  | * Check for errors | 
|  | * -ENODEV: Device has disappeared, no point continuing. | 
|  | * All other errors: Try again. | 
|  | */ | 
|  | else if (status == -ENODEV) | 
|  | break; | 
|  | } | 
|  |  | 
|  | ERROR(rt2x00dev, | 
|  | "Vendor Request 0x%02x failed for offset 0x%04x with error %d.\n", | 
|  | request, offset, status); | 
|  |  | 
|  | return status; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(rt2x00usb_vendor_request); | 
|  |  | 
|  | int rt2x00usb_vendor_request_buff(const struct rt2x00_dev *rt2x00dev, | 
|  | const u8 request, const u8 requesttype, | 
|  | const u16 offset, void *buffer, | 
|  | const u16 buffer_length, const int timeout) | 
|  | { | 
|  | int status; | 
|  |  | 
|  | /* | 
|  | * Check for Cache availability. | 
|  | */ | 
|  | if (unlikely(!rt2x00dev->csr_cache || buffer_length > CSR_CACHE_SIZE)) { | 
|  | ERROR(rt2x00dev, "CSR cache not available.\n"); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | if (requesttype == USB_VENDOR_REQUEST_OUT) | 
|  | memcpy(rt2x00dev->csr_cache, buffer, buffer_length); | 
|  |  | 
|  | status = rt2x00usb_vendor_request(rt2x00dev, request, requesttype, | 
|  | offset, 0, rt2x00dev->csr_cache, | 
|  | buffer_length, timeout); | 
|  |  | 
|  | if (!status && requesttype == USB_VENDOR_REQUEST_IN) | 
|  | memcpy(buffer, rt2x00dev->csr_cache, buffer_length); | 
|  |  | 
|  | return status; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(rt2x00usb_vendor_request_buff); | 
|  |  | 
|  | /* | 
|  | * TX data handlers. | 
|  | */ | 
|  | static void rt2x00usb_interrupt_txdone(struct urb *urb) | 
|  | { | 
|  | struct data_entry *entry = (struct data_entry *)urb->context; | 
|  | struct data_ring *ring = entry->ring; | 
|  | struct rt2x00_dev *rt2x00dev = ring->rt2x00dev; | 
|  | struct data_desc *txd = (struct data_desc *)entry->skb->data; | 
|  | u32 word; | 
|  | int tx_status; | 
|  |  | 
|  | if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags) || | 
|  | !__test_and_clear_bit(ENTRY_OWNER_NIC, &entry->flags)) | 
|  | return; | 
|  |  | 
|  | rt2x00_desc_read(txd, 0, &word); | 
|  |  | 
|  | /* | 
|  | * Remove the descriptor data from the buffer. | 
|  | */ | 
|  | skb_pull(entry->skb, ring->desc_size); | 
|  |  | 
|  | /* | 
|  | * Obtain the status about this packet. | 
|  | */ | 
|  | tx_status = !urb->status ? TX_SUCCESS : TX_FAIL_RETRY; | 
|  |  | 
|  | rt2x00lib_txdone(entry, tx_status, 0); | 
|  |  | 
|  | /* | 
|  | * Make this entry available for reuse. | 
|  | */ | 
|  | entry->flags = 0; | 
|  | rt2x00_ring_index_done_inc(entry->ring); | 
|  |  | 
|  | /* | 
|  | * If the data ring was full before the txdone handler | 
|  | * we must make sure the packet queue in the mac80211 stack | 
|  | * is reenabled when the txdone handler has finished. | 
|  | */ | 
|  | if (!rt2x00_ring_full(ring)) | 
|  | ieee80211_wake_queue(rt2x00dev->hw, | 
|  | entry->tx_status.control.queue); | 
|  | } | 
|  |  | 
|  | int rt2x00usb_write_tx_data(struct rt2x00_dev *rt2x00dev, | 
|  | struct data_ring *ring, struct sk_buff *skb, | 
|  | struct ieee80211_tx_control *control) | 
|  | { | 
|  | struct usb_device *usb_dev = | 
|  | interface_to_usbdev(rt2x00dev_usb(rt2x00dev)); | 
|  | struct data_entry *entry = rt2x00_get_data_entry(ring); | 
|  | int pipe = usb_sndbulkpipe(usb_dev, 1); | 
|  | int max_packet = usb_maxpacket(usb_dev, pipe, 1); | 
|  | u32 length; | 
|  |  | 
|  | if (rt2x00_ring_full(ring)) { | 
|  | ieee80211_stop_queue(rt2x00dev->hw, control->queue); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | if (test_bit(ENTRY_OWNER_NIC, &entry->flags)) { | 
|  | ERROR(rt2x00dev, | 
|  | "Arrived at non-free entry in the non-full queue %d.\n" | 
|  | "Please file bug report to %s.\n", | 
|  | control->queue, DRV_PROJECT); | 
|  | ieee80211_stop_queue(rt2x00dev->hw, control->queue); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Add the descriptor in front of the skb. | 
|  | */ | 
|  | skb_push(skb, ring->desc_size); | 
|  | memset(skb->data, 0, ring->desc_size); | 
|  |  | 
|  | rt2x00lib_write_tx_desc(rt2x00dev, (struct data_desc *)skb->data, | 
|  | (struct ieee80211_hdr *)(skb->data + | 
|  | ring->desc_size), | 
|  | skb->len - ring->desc_size, control); | 
|  | memcpy(&entry->tx_status.control, control, sizeof(*control)); | 
|  | entry->skb = skb; | 
|  |  | 
|  | /* | 
|  | * USB devices cannot blindly pass the skb->len as the | 
|  | * length of the data to usb_fill_bulk_urb. Pass the skb | 
|  | * to the driver to determine what the length should be. | 
|  | */ | 
|  | length = rt2x00dev->ops->lib->get_tx_data_len(rt2x00dev, | 
|  | max_packet, skb); | 
|  |  | 
|  | /* | 
|  | * Initialize URB and send the frame to the device. | 
|  | */ | 
|  | __set_bit(ENTRY_OWNER_NIC, &entry->flags); | 
|  | usb_fill_bulk_urb(entry->priv, usb_dev, pipe, | 
|  | skb->data, length, rt2x00usb_interrupt_txdone, entry); | 
|  | usb_submit_urb(entry->priv, GFP_ATOMIC); | 
|  |  | 
|  | rt2x00_ring_index_inc(ring); | 
|  |  | 
|  | if (rt2x00_ring_full(ring)) | 
|  | ieee80211_stop_queue(rt2x00dev->hw, control->queue); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(rt2x00usb_write_tx_data); | 
|  |  | 
|  | /* | 
|  | * RX data handlers. | 
|  | */ | 
|  | static void rt2x00usb_interrupt_rxdone(struct urb *urb) | 
|  | { | 
|  | struct data_entry *entry = (struct data_entry *)urb->context; | 
|  | struct data_ring *ring = entry->ring; | 
|  | struct rt2x00_dev *rt2x00dev = ring->rt2x00dev; | 
|  | struct sk_buff *skb; | 
|  | struct rxdata_entry_desc desc; | 
|  | int frame_size; | 
|  |  | 
|  | if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags) || | 
|  | !test_and_clear_bit(ENTRY_OWNER_NIC, &entry->flags)) | 
|  | return; | 
|  |  | 
|  | /* | 
|  | * Check if the received data is simply too small | 
|  | * to be actually valid, or if the urb is signaling | 
|  | * a problem. | 
|  | */ | 
|  | if (urb->actual_length < entry->ring->desc_size || urb->status) | 
|  | goto skip_entry; | 
|  |  | 
|  | memset(&desc, 0x00, sizeof(desc)); | 
|  | rt2x00dev->ops->lib->fill_rxdone(entry, &desc); | 
|  |  | 
|  | /* | 
|  | * Allocate a new sk buffer to replace the current one. | 
|  | * If allocation fails, we should drop the current frame | 
|  | * so we can recycle the existing sk buffer for the new frame. | 
|  | */ | 
|  | frame_size = entry->ring->data_size + entry->ring->desc_size; | 
|  | skb = dev_alloc_skb(frame_size + NET_IP_ALIGN); | 
|  | if (!skb) | 
|  | goto skip_entry; | 
|  |  | 
|  | skb_reserve(skb, NET_IP_ALIGN); | 
|  | skb_put(skb, frame_size); | 
|  |  | 
|  | /* | 
|  | * Trim the skb_buffer to only contain the valid | 
|  | * frame data (so ignore the device's descriptor). | 
|  | */ | 
|  | skb_trim(entry->skb, desc.size); | 
|  |  | 
|  | /* | 
|  | * Send the frame to rt2x00lib for further processing. | 
|  | */ | 
|  | rt2x00lib_rxdone(entry, entry->skb, &desc); | 
|  |  | 
|  | /* | 
|  | * Replace current entry's skb with the newly allocated one, | 
|  | * and reinitialize the urb. | 
|  | */ | 
|  | entry->skb = skb; | 
|  | urb->transfer_buffer = entry->skb->data; | 
|  | urb->transfer_buffer_length = entry->skb->len; | 
|  |  | 
|  | skip_entry: | 
|  | if (test_bit(DEVICE_ENABLED_RADIO, &ring->rt2x00dev->flags)) { | 
|  | __set_bit(ENTRY_OWNER_NIC, &entry->flags); | 
|  | usb_submit_urb(urb, GFP_ATOMIC); | 
|  | } | 
|  |  | 
|  | rt2x00_ring_index_inc(ring); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Radio handlers | 
|  | */ | 
|  | void rt2x00usb_enable_radio(struct rt2x00_dev *rt2x00dev) | 
|  | { | 
|  | struct usb_device *usb_dev = | 
|  | interface_to_usbdev(rt2x00dev_usb(rt2x00dev)); | 
|  | struct data_ring *ring; | 
|  | struct data_entry *entry; | 
|  | unsigned int i; | 
|  |  | 
|  | /* | 
|  | * Initialize the TX rings | 
|  | */ | 
|  | txringall_for_each(rt2x00dev, ring) { | 
|  | for (i = 0; i < ring->stats.limit; i++) | 
|  | ring->entry[i].flags = 0; | 
|  |  | 
|  | rt2x00_ring_index_clear(ring); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Initialize and start the RX ring. | 
|  | */ | 
|  | rt2x00_ring_index_clear(rt2x00dev->rx); | 
|  |  | 
|  | for (i = 0; i < rt2x00dev->rx->stats.limit; i++) { | 
|  | entry = &rt2x00dev->rx->entry[i]; | 
|  |  | 
|  | usb_fill_bulk_urb(entry->priv, usb_dev, | 
|  | usb_rcvbulkpipe(usb_dev, 1), | 
|  | entry->skb->data, entry->skb->len, | 
|  | rt2x00usb_interrupt_rxdone, entry); | 
|  |  | 
|  | __set_bit(ENTRY_OWNER_NIC, &entry->flags); | 
|  | usb_submit_urb(entry->priv, GFP_ATOMIC); | 
|  | } | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(rt2x00usb_enable_radio); | 
|  |  | 
|  | void rt2x00usb_disable_radio(struct rt2x00_dev *rt2x00dev) | 
|  | { | 
|  | struct data_ring *ring; | 
|  | unsigned int i; | 
|  |  | 
|  | rt2x00usb_vendor_request_sw(rt2x00dev, USB_RX_CONTROL, 0x0000, 0x0000, | 
|  | REGISTER_TIMEOUT); | 
|  |  | 
|  | /* | 
|  | * Cancel all rings. | 
|  | */ | 
|  | ring_for_each(rt2x00dev, ring) { | 
|  | for (i = 0; i < ring->stats.limit; i++) | 
|  | usb_kill_urb(ring->entry[i].priv); | 
|  | } | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(rt2x00usb_disable_radio); | 
|  |  | 
|  | /* | 
|  | * Device initialization handlers. | 
|  | */ | 
|  | static int rt2x00usb_alloc_urb(struct rt2x00_dev *rt2x00dev, | 
|  | struct data_ring *ring) | 
|  | { | 
|  | unsigned int i; | 
|  |  | 
|  | /* | 
|  | * Allocate the URB's | 
|  | */ | 
|  | for (i = 0; i < ring->stats.limit; i++) { | 
|  | ring->entry[i].priv = usb_alloc_urb(0, GFP_KERNEL); | 
|  | if (!ring->entry[i].priv) | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void rt2x00usb_free_urb(struct rt2x00_dev *rt2x00dev, | 
|  | struct data_ring *ring) | 
|  | { | 
|  | unsigned int i; | 
|  |  | 
|  | if (!ring->entry) | 
|  | return; | 
|  |  | 
|  | for (i = 0; i < ring->stats.limit; i++) { | 
|  | usb_kill_urb(ring->entry[i].priv); | 
|  | usb_free_urb(ring->entry[i].priv); | 
|  | if (ring->entry[i].skb) | 
|  | kfree_skb(ring->entry[i].skb); | 
|  | } | 
|  | } | 
|  |  | 
|  | int rt2x00usb_initialize(struct rt2x00_dev *rt2x00dev) | 
|  | { | 
|  | struct data_ring *ring; | 
|  | struct sk_buff *skb; | 
|  | unsigned int entry_size; | 
|  | unsigned int i; | 
|  | int status; | 
|  |  | 
|  | /* | 
|  | * Allocate DMA | 
|  | */ | 
|  | ring_for_each(rt2x00dev, ring) { | 
|  | status = rt2x00usb_alloc_urb(rt2x00dev, ring); | 
|  | if (status) | 
|  | goto exit; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * For the RX ring, skb's should be allocated. | 
|  | */ | 
|  | entry_size = rt2x00dev->rx->data_size + rt2x00dev->rx->desc_size; | 
|  | for (i = 0; i < rt2x00dev->rx->stats.limit; i++) { | 
|  | skb = dev_alloc_skb(NET_IP_ALIGN + entry_size); | 
|  | if (!skb) | 
|  | goto exit; | 
|  |  | 
|  | skb_reserve(skb, NET_IP_ALIGN); | 
|  | skb_put(skb, entry_size); | 
|  |  | 
|  | rt2x00dev->rx->entry[i].skb = skb; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | exit: | 
|  | rt2x00usb_uninitialize(rt2x00dev); | 
|  |  | 
|  | return status; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(rt2x00usb_initialize); | 
|  |  | 
|  | void rt2x00usb_uninitialize(struct rt2x00_dev *rt2x00dev) | 
|  | { | 
|  | struct data_ring *ring; | 
|  |  | 
|  | ring_for_each(rt2x00dev, ring) | 
|  | rt2x00usb_free_urb(rt2x00dev, ring); | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(rt2x00usb_uninitialize); | 
|  |  | 
|  | /* | 
|  | * USB driver handlers. | 
|  | */ | 
|  | static void rt2x00usb_free_reg(struct rt2x00_dev *rt2x00dev) | 
|  | { | 
|  | kfree(rt2x00dev->rf); | 
|  | rt2x00dev->rf = NULL; | 
|  |  | 
|  | kfree(rt2x00dev->eeprom); | 
|  | rt2x00dev->eeprom = NULL; | 
|  |  | 
|  | kfree(rt2x00dev->csr_cache); | 
|  | rt2x00dev->csr_cache = NULL; | 
|  | } | 
|  |  | 
|  | static int rt2x00usb_alloc_reg(struct rt2x00_dev *rt2x00dev) | 
|  | { | 
|  | rt2x00dev->csr_cache = kzalloc(CSR_CACHE_SIZE, GFP_KERNEL); | 
|  | if (!rt2x00dev->csr_cache) | 
|  | goto exit; | 
|  |  | 
|  | rt2x00dev->eeprom = kzalloc(rt2x00dev->ops->eeprom_size, GFP_KERNEL); | 
|  | if (!rt2x00dev->eeprom) | 
|  | goto exit; | 
|  |  | 
|  | rt2x00dev->rf = kzalloc(rt2x00dev->ops->rf_size, GFP_KERNEL); | 
|  | if (!rt2x00dev->rf) | 
|  | goto exit; | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | exit: | 
|  | ERROR_PROBE("Failed to allocate registers.\n"); | 
|  |  | 
|  | rt2x00usb_free_reg(rt2x00dev); | 
|  |  | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | int rt2x00usb_probe(struct usb_interface *usb_intf, | 
|  | const struct usb_device_id *id) | 
|  | { | 
|  | struct usb_device *usb_dev = interface_to_usbdev(usb_intf); | 
|  | struct rt2x00_ops *ops = (struct rt2x00_ops *)id->driver_info; | 
|  | struct ieee80211_hw *hw; | 
|  | struct rt2x00_dev *rt2x00dev; | 
|  | int retval; | 
|  |  | 
|  | usb_dev = usb_get_dev(usb_dev); | 
|  |  | 
|  | hw = ieee80211_alloc_hw(sizeof(struct rt2x00_dev), ops->hw); | 
|  | if (!hw) { | 
|  | ERROR_PROBE("Failed to allocate hardware.\n"); | 
|  | retval = -ENOMEM; | 
|  | goto exit_put_device; | 
|  | } | 
|  |  | 
|  | usb_set_intfdata(usb_intf, hw); | 
|  |  | 
|  | rt2x00dev = hw->priv; | 
|  | rt2x00dev->dev = usb_intf; | 
|  | rt2x00dev->ops = ops; | 
|  | rt2x00dev->hw = hw; | 
|  |  | 
|  | retval = rt2x00usb_alloc_reg(rt2x00dev); | 
|  | if (retval) | 
|  | goto exit_free_device; | 
|  |  | 
|  | retval = rt2x00lib_probe_dev(rt2x00dev); | 
|  | if (retval) | 
|  | goto exit_free_reg; | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | exit_free_reg: | 
|  | rt2x00usb_free_reg(rt2x00dev); | 
|  |  | 
|  | exit_free_device: | 
|  | ieee80211_free_hw(hw); | 
|  |  | 
|  | exit_put_device: | 
|  | usb_put_dev(usb_dev); | 
|  |  | 
|  | usb_set_intfdata(usb_intf, NULL); | 
|  |  | 
|  | return retval; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(rt2x00usb_probe); | 
|  |  | 
|  | void rt2x00usb_disconnect(struct usb_interface *usb_intf) | 
|  | { | 
|  | struct ieee80211_hw *hw = usb_get_intfdata(usb_intf); | 
|  | struct rt2x00_dev *rt2x00dev = hw->priv; | 
|  |  | 
|  | /* | 
|  | * Free all allocated data. | 
|  | */ | 
|  | rt2x00lib_remove_dev(rt2x00dev); | 
|  | rt2x00usb_free_reg(rt2x00dev); | 
|  | ieee80211_free_hw(hw); | 
|  |  | 
|  | /* | 
|  | * Free the USB device data. | 
|  | */ | 
|  | usb_set_intfdata(usb_intf, NULL); | 
|  | usb_put_dev(interface_to_usbdev(usb_intf)); | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(rt2x00usb_disconnect); | 
|  |  | 
|  | #ifdef CONFIG_PM | 
|  | int rt2x00usb_suspend(struct usb_interface *usb_intf, pm_message_t state) | 
|  | { | 
|  | struct ieee80211_hw *hw = usb_get_intfdata(usb_intf); | 
|  | struct rt2x00_dev *rt2x00dev = hw->priv; | 
|  | int retval; | 
|  |  | 
|  | retval = rt2x00lib_suspend(rt2x00dev, state); | 
|  | if (retval) | 
|  | return retval; | 
|  |  | 
|  | rt2x00usb_free_reg(rt2x00dev); | 
|  |  | 
|  | /* | 
|  | * Decrease usbdev refcount. | 
|  | */ | 
|  | usb_put_dev(interface_to_usbdev(usb_intf)); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(rt2x00usb_suspend); | 
|  |  | 
|  | int rt2x00usb_resume(struct usb_interface *usb_intf) | 
|  | { | 
|  | struct ieee80211_hw *hw = usb_get_intfdata(usb_intf); | 
|  | struct rt2x00_dev *rt2x00dev = hw->priv; | 
|  | int retval; | 
|  |  | 
|  | usb_get_dev(interface_to_usbdev(usb_intf)); | 
|  |  | 
|  | retval = rt2x00usb_alloc_reg(rt2x00dev); | 
|  | if (retval) | 
|  | return retval; | 
|  |  | 
|  | retval = rt2x00lib_resume(rt2x00dev); | 
|  | if (retval) | 
|  | goto exit_free_reg; | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | exit_free_reg: | 
|  | rt2x00usb_free_reg(rt2x00dev); | 
|  |  | 
|  | return retval; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(rt2x00usb_resume); | 
|  | #endif /* CONFIG_PM */ | 
|  |  | 
|  | /* | 
|  | * rt2x00pci module information. | 
|  | */ | 
|  | MODULE_AUTHOR(DRV_PROJECT); | 
|  | MODULE_VERSION(DRV_VERSION); | 
|  | MODULE_DESCRIPTION("rt2x00 library"); | 
|  | MODULE_LICENSE("GPL"); |