|  | /* | 
|  | * Driver for keys on GPIO lines capable of generating interrupts. | 
|  | * | 
|  | * Copyright 2005 Phil Blundell | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License version 2 as | 
|  | * published by the Free Software Foundation. | 
|  | */ | 
|  |  | 
|  | #include <linux/module.h> | 
|  |  | 
|  | #include <linux/init.h> | 
|  | #include <linux/fs.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/irq.h> | 
|  | #include <linux/sched.h> | 
|  | #include <linux/pm.h> | 
|  | #include <linux/sysctl.h> | 
|  | #include <linux/proc_fs.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/input.h> | 
|  | #include <linux/gpio_keys.h> | 
|  | #include <linux/workqueue.h> | 
|  | #include <linux/gpio.h> | 
|  |  | 
|  | struct gpio_button_data { | 
|  | struct gpio_keys_button *button; | 
|  | struct input_dev *input; | 
|  | struct timer_list timer; | 
|  | struct work_struct work; | 
|  | }; | 
|  |  | 
|  | struct gpio_keys_drvdata { | 
|  | struct input_dev *input; | 
|  | struct gpio_button_data data[0]; | 
|  | }; | 
|  |  | 
|  | static void gpio_keys_report_event(struct gpio_button_data *bdata) | 
|  | { | 
|  | struct gpio_keys_button *button = bdata->button; | 
|  | struct input_dev *input = bdata->input; | 
|  | unsigned int type = button->type ?: EV_KEY; | 
|  | int state = (gpio_get_value(button->gpio) ? 1 : 0) ^ button->active_low; | 
|  |  | 
|  | input_event(input, type, button->code, !!state); | 
|  | input_sync(input); | 
|  | } | 
|  |  | 
|  | static void gpio_keys_work_func(struct work_struct *work) | 
|  | { | 
|  | struct gpio_button_data *bdata = | 
|  | container_of(work, struct gpio_button_data, work); | 
|  |  | 
|  | gpio_keys_report_event(bdata); | 
|  | } | 
|  |  | 
|  | static void gpio_keys_timer(unsigned long _data) | 
|  | { | 
|  | struct gpio_button_data *data = (struct gpio_button_data *)_data; | 
|  |  | 
|  | schedule_work(&data->work); | 
|  | } | 
|  |  | 
|  | static irqreturn_t gpio_keys_isr(int irq, void *dev_id) | 
|  | { | 
|  | struct gpio_button_data *bdata = dev_id; | 
|  | struct gpio_keys_button *button = bdata->button; | 
|  |  | 
|  | BUG_ON(irq != gpio_to_irq(button->gpio)); | 
|  |  | 
|  | if (button->debounce_interval) | 
|  | mod_timer(&bdata->timer, | 
|  | jiffies + msecs_to_jiffies(button->debounce_interval)); | 
|  | else | 
|  | schedule_work(&bdata->work); | 
|  |  | 
|  | return IRQ_HANDLED; | 
|  | } | 
|  |  | 
|  | static int __devinit gpio_keys_setup_key(struct device *dev, | 
|  | struct gpio_button_data *bdata, | 
|  | struct gpio_keys_button *button) | 
|  | { | 
|  | char *desc = button->desc ? button->desc : "gpio_keys"; | 
|  | int irq, error; | 
|  |  | 
|  | setup_timer(&bdata->timer, gpio_keys_timer, (unsigned long)bdata); | 
|  | INIT_WORK(&bdata->work, gpio_keys_work_func); | 
|  |  | 
|  | error = gpio_request(button->gpio, desc); | 
|  | if (error < 0) { | 
|  | dev_err(dev, "failed to request GPIO %d, error %d\n", | 
|  | button->gpio, error); | 
|  | goto fail2; | 
|  | } | 
|  |  | 
|  | error = gpio_direction_input(button->gpio); | 
|  | if (error < 0) { | 
|  | dev_err(dev, "failed to configure" | 
|  | " direction for GPIO %d, error %d\n", | 
|  | button->gpio, error); | 
|  | goto fail3; | 
|  | } | 
|  |  | 
|  | irq = gpio_to_irq(button->gpio); | 
|  | if (irq < 0) { | 
|  | error = irq; | 
|  | dev_err(dev, "Unable to get irq number for GPIO %d, error %d\n", | 
|  | button->gpio, error); | 
|  | goto fail3; | 
|  | } | 
|  |  | 
|  | error = request_irq(irq, gpio_keys_isr, | 
|  | IRQF_SHARED | | 
|  | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, | 
|  | desc, bdata); | 
|  | if (error) { | 
|  | dev_err(dev, "Unable to claim irq %d; error %d\n", | 
|  | irq, error); | 
|  | goto fail3; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | fail3: | 
|  | gpio_free(button->gpio); | 
|  | fail2: | 
|  | return error; | 
|  | } | 
|  |  | 
|  | static int __devinit gpio_keys_probe(struct platform_device *pdev) | 
|  | { | 
|  | struct gpio_keys_platform_data *pdata = pdev->dev.platform_data; | 
|  | struct gpio_keys_drvdata *ddata; | 
|  | struct device *dev = &pdev->dev; | 
|  | struct input_dev *input; | 
|  | int i, error; | 
|  | int wakeup = 0; | 
|  |  | 
|  | ddata = kzalloc(sizeof(struct gpio_keys_drvdata) + | 
|  | pdata->nbuttons * sizeof(struct gpio_button_data), | 
|  | GFP_KERNEL); | 
|  | input = input_allocate_device(); | 
|  | if (!ddata || !input) { | 
|  | dev_err(dev, "failed to allocate state\n"); | 
|  | error = -ENOMEM; | 
|  | goto fail1; | 
|  | } | 
|  |  | 
|  | platform_set_drvdata(pdev, ddata); | 
|  |  | 
|  | input->name = pdev->name; | 
|  | input->phys = "gpio-keys/input0"; | 
|  | input->dev.parent = &pdev->dev; | 
|  |  | 
|  | input->id.bustype = BUS_HOST; | 
|  | input->id.vendor = 0x0001; | 
|  | input->id.product = 0x0001; | 
|  | input->id.version = 0x0100; | 
|  |  | 
|  | /* Enable auto repeat feature of Linux input subsystem */ | 
|  | if (pdata->rep) | 
|  | __set_bit(EV_REP, input->evbit); | 
|  |  | 
|  | ddata->input = input; | 
|  |  | 
|  | for (i = 0; i < pdata->nbuttons; i++) { | 
|  | struct gpio_keys_button *button = &pdata->buttons[i]; | 
|  | struct gpio_button_data *bdata = &ddata->data[i]; | 
|  | unsigned int type = button->type ?: EV_KEY; | 
|  |  | 
|  | bdata->input = input; | 
|  | bdata->button = button; | 
|  |  | 
|  | error = gpio_keys_setup_key(dev, bdata, button); | 
|  | if (error) | 
|  | goto fail2; | 
|  |  | 
|  | if (button->wakeup) | 
|  | wakeup = 1; | 
|  |  | 
|  | input_set_capability(input, type, button->code); | 
|  | } | 
|  |  | 
|  | error = input_register_device(input); | 
|  | if (error) { | 
|  | dev_err(dev, "Unable to register input device, " | 
|  | "error: %d\n", error); | 
|  | goto fail2; | 
|  | } | 
|  |  | 
|  | /* get current state of buttons */ | 
|  | for (i = 0; i < pdata->nbuttons; i++) | 
|  | gpio_keys_report_event(&ddata->data[i]); | 
|  | input_sync(input); | 
|  |  | 
|  | device_init_wakeup(&pdev->dev, wakeup); | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | fail2: | 
|  | while (--i >= 0) { | 
|  | free_irq(gpio_to_irq(pdata->buttons[i].gpio), &ddata->data[i]); | 
|  | if (pdata->buttons[i].debounce_interval) | 
|  | del_timer_sync(&ddata->data[i].timer); | 
|  | cancel_work_sync(&ddata->data[i].work); | 
|  | gpio_free(pdata->buttons[i].gpio); | 
|  | } | 
|  |  | 
|  | platform_set_drvdata(pdev, NULL); | 
|  | fail1: | 
|  | input_free_device(input); | 
|  | kfree(ddata); | 
|  |  | 
|  | return error; | 
|  | } | 
|  |  | 
|  | static int __devexit gpio_keys_remove(struct platform_device *pdev) | 
|  | { | 
|  | struct gpio_keys_platform_data *pdata = pdev->dev.platform_data; | 
|  | struct gpio_keys_drvdata *ddata = platform_get_drvdata(pdev); | 
|  | struct input_dev *input = ddata->input; | 
|  | int i; | 
|  |  | 
|  | device_init_wakeup(&pdev->dev, 0); | 
|  |  | 
|  | for (i = 0; i < pdata->nbuttons; i++) { | 
|  | int irq = gpio_to_irq(pdata->buttons[i].gpio); | 
|  | free_irq(irq, &ddata->data[i]); | 
|  | if (pdata->buttons[i].debounce_interval) | 
|  | del_timer_sync(&ddata->data[i].timer); | 
|  | cancel_work_sync(&ddata->data[i].work); | 
|  | gpio_free(pdata->buttons[i].gpio); | 
|  | } | 
|  |  | 
|  | input_unregister_device(input); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | #ifdef CONFIG_PM | 
|  | static int gpio_keys_suspend(struct device *dev) | 
|  | { | 
|  | struct platform_device *pdev = to_platform_device(dev); | 
|  | struct gpio_keys_platform_data *pdata = pdev->dev.platform_data; | 
|  | int i; | 
|  |  | 
|  | if (device_may_wakeup(&pdev->dev)) { | 
|  | for (i = 0; i < pdata->nbuttons; i++) { | 
|  | struct gpio_keys_button *button = &pdata->buttons[i]; | 
|  | if (button->wakeup) { | 
|  | int irq = gpio_to_irq(button->gpio); | 
|  | enable_irq_wake(irq); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int gpio_keys_resume(struct device *dev) | 
|  | { | 
|  | struct platform_device *pdev = to_platform_device(dev); | 
|  | struct gpio_keys_drvdata *ddata = platform_get_drvdata(pdev); | 
|  | struct gpio_keys_platform_data *pdata = pdev->dev.platform_data; | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < pdata->nbuttons; i++) { | 
|  |  | 
|  | struct gpio_keys_button *button = &pdata->buttons[i]; | 
|  | if (button->wakeup && device_may_wakeup(&pdev->dev)) { | 
|  | int irq = gpio_to_irq(button->gpio); | 
|  | disable_irq_wake(irq); | 
|  | } | 
|  |  | 
|  | gpio_keys_report_event(&ddata->data[i]); | 
|  | } | 
|  | input_sync(ddata->input); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct dev_pm_ops gpio_keys_pm_ops = { | 
|  | .suspend	= gpio_keys_suspend, | 
|  | .resume		= gpio_keys_resume, | 
|  | }; | 
|  | #endif | 
|  |  | 
|  | static struct platform_driver gpio_keys_device_driver = { | 
|  | .probe		= gpio_keys_probe, | 
|  | .remove		= __devexit_p(gpio_keys_remove), | 
|  | .driver		= { | 
|  | .name	= "gpio-keys", | 
|  | .owner	= THIS_MODULE, | 
|  | #ifdef CONFIG_PM | 
|  | .pm	= &gpio_keys_pm_ops, | 
|  | #endif | 
|  | } | 
|  | }; | 
|  |  | 
|  | static int __init gpio_keys_init(void) | 
|  | { | 
|  | return platform_driver_register(&gpio_keys_device_driver); | 
|  | } | 
|  |  | 
|  | static void __exit gpio_keys_exit(void) | 
|  | { | 
|  | platform_driver_unregister(&gpio_keys_device_driver); | 
|  | } | 
|  |  | 
|  | module_init(gpio_keys_init); | 
|  | module_exit(gpio_keys_exit); | 
|  |  | 
|  | MODULE_LICENSE("GPL"); | 
|  | MODULE_AUTHOR("Phil Blundell <pb@handhelds.org>"); | 
|  | MODULE_DESCRIPTION("Keyboard driver for CPU GPIOs"); | 
|  | MODULE_ALIAS("platform:gpio-keys"); |