|  | /* | 
|  | * max7359_keypad.c - MAX7359 Key Switch Controller Driver | 
|  | * | 
|  | * Copyright (C) 2009 Samsung Electronics | 
|  | * Kim Kyuwon <q1.kim@samsung.com> | 
|  | * | 
|  | * Based on pxa27x_keypad.c | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License version 2 as | 
|  | * published by the Free Software Foundation. | 
|  | * | 
|  | * Datasheet: http://www.maxim-ic.com/quick_view2.cfm/qv_pk/5456 | 
|  | */ | 
|  |  | 
|  | #include <linux/module.h> | 
|  | #include <linux/i2c.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/input.h> | 
|  | #include <linux/input/matrix_keypad.h> | 
|  |  | 
|  | #define MAX7359_MAX_KEY_ROWS	8 | 
|  | #define MAX7359_MAX_KEY_COLS	8 | 
|  | #define MAX7359_MAX_KEY_NUM	(MAX7359_MAX_KEY_ROWS * MAX7359_MAX_KEY_COLS) | 
|  | #define MAX7359_ROW_SHIFT	3 | 
|  |  | 
|  | /* | 
|  | * MAX7359 registers | 
|  | */ | 
|  | #define MAX7359_REG_KEYFIFO	0x00 | 
|  | #define MAX7359_REG_CONFIG	0x01 | 
|  | #define MAX7359_REG_DEBOUNCE	0x02 | 
|  | #define MAX7359_REG_INTERRUPT	0x03 | 
|  | #define MAX7359_REG_PORTS	0x04 | 
|  | #define MAX7359_REG_KEYREP	0x05 | 
|  | #define MAX7359_REG_SLEEP	0x06 | 
|  |  | 
|  | /* | 
|  | * Configuration register bits | 
|  | */ | 
|  | #define MAX7359_CFG_SLEEP	(1 << 7) | 
|  | #define MAX7359_CFG_INTERRUPT	(1 << 5) | 
|  | #define MAX7359_CFG_KEY_RELEASE	(1 << 3) | 
|  | #define MAX7359_CFG_WAKEUP	(1 << 1) | 
|  | #define MAX7359_CFG_TIMEOUT	(1 << 0) | 
|  |  | 
|  | /* | 
|  | * Autosleep register values (ms) | 
|  | */ | 
|  | #define MAX7359_AUTOSLEEP_8192	0x01 | 
|  | #define MAX7359_AUTOSLEEP_4096	0x02 | 
|  | #define MAX7359_AUTOSLEEP_2048	0x03 | 
|  | #define MAX7359_AUTOSLEEP_1024	0x04 | 
|  | #define MAX7359_AUTOSLEEP_512	0x05 | 
|  | #define MAX7359_AUTOSLEEP_256	0x06 | 
|  |  | 
|  | struct max7359_keypad { | 
|  | /* matrix key code map */ | 
|  | unsigned short keycodes[MAX7359_MAX_KEY_NUM]; | 
|  |  | 
|  | struct input_dev *input_dev; | 
|  | struct i2c_client *client; | 
|  | }; | 
|  |  | 
|  | static int max7359_write_reg(struct i2c_client *client, u8 reg, u8 val) | 
|  | { | 
|  | int ret = i2c_smbus_write_byte_data(client, reg, val); | 
|  |  | 
|  | if (ret < 0) | 
|  | dev_err(&client->dev, "%s: reg 0x%x, val 0x%x, err %d\n", | 
|  | __func__, reg, val, ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int max7359_read_reg(struct i2c_client *client, int reg) | 
|  | { | 
|  | int ret = i2c_smbus_read_byte_data(client, reg); | 
|  |  | 
|  | if (ret < 0) | 
|  | dev_err(&client->dev, "%s: reg 0x%x, err %d\n", | 
|  | __func__, reg, ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void max7359_build_keycode(struct max7359_keypad *keypad, | 
|  | const struct matrix_keymap_data *keymap_data) | 
|  | { | 
|  | struct input_dev *input_dev = keypad->input_dev; | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < keymap_data->keymap_size; i++) { | 
|  | unsigned int key = keymap_data->keymap[i]; | 
|  | unsigned int row = KEY_ROW(key); | 
|  | unsigned int col = KEY_COL(key); | 
|  | unsigned int scancode = MATRIX_SCAN_CODE(row, col, | 
|  | MAX7359_ROW_SHIFT); | 
|  | unsigned short keycode = KEY_VAL(key); | 
|  |  | 
|  | keypad->keycodes[scancode] = keycode; | 
|  | __set_bit(keycode, input_dev->keybit); | 
|  | } | 
|  | __clear_bit(KEY_RESERVED, input_dev->keybit); | 
|  | } | 
|  |  | 
|  | /* runs in an IRQ thread -- can (and will!) sleep */ | 
|  | static irqreturn_t max7359_interrupt(int irq, void *dev_id) | 
|  | { | 
|  | struct max7359_keypad *keypad = dev_id; | 
|  | struct input_dev *input_dev = keypad->input_dev; | 
|  | int val, row, col, release, code; | 
|  |  | 
|  | val = max7359_read_reg(keypad->client, MAX7359_REG_KEYFIFO); | 
|  | row = val & 0x7; | 
|  | col = (val >> 3) & 0x7; | 
|  | release = val & 0x40; | 
|  |  | 
|  | code = MATRIX_SCAN_CODE(row, col, MAX7359_ROW_SHIFT); | 
|  |  | 
|  | dev_dbg(&keypad->client->dev, | 
|  | "key[%d:%d] %s\n", row, col, release ? "release" : "press"); | 
|  |  | 
|  | input_event(input_dev, EV_MSC, MSC_SCAN, code); | 
|  | input_report_key(input_dev, keypad->keycodes[code], !release); | 
|  | input_sync(input_dev); | 
|  |  | 
|  | return IRQ_HANDLED; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Let MAX7359 fall into a deep sleep: | 
|  | * If no keys are pressed, enter sleep mode for 8192 ms. And if any | 
|  | * key is pressed, the MAX7359 returns to normal operating mode. | 
|  | */ | 
|  | static inline void max7359_fall_deepsleep(struct i2c_client *client) | 
|  | { | 
|  | max7359_write_reg(client, MAX7359_REG_SLEEP, MAX7359_AUTOSLEEP_8192); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Let MAX7359 take a catnap: | 
|  | * Autosleep just for 256 ms. | 
|  | */ | 
|  | static inline void max7359_take_catnap(struct i2c_client *client) | 
|  | { | 
|  | max7359_write_reg(client, MAX7359_REG_SLEEP, MAX7359_AUTOSLEEP_256); | 
|  | } | 
|  |  | 
|  | static int max7359_open(struct input_dev *dev) | 
|  | { | 
|  | struct max7359_keypad *keypad = input_get_drvdata(dev); | 
|  |  | 
|  | max7359_take_catnap(keypad->client); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void max7359_close(struct input_dev *dev) | 
|  | { | 
|  | struct max7359_keypad *keypad = input_get_drvdata(dev); | 
|  |  | 
|  | max7359_fall_deepsleep(keypad->client); | 
|  | } | 
|  |  | 
|  | static void max7359_initialize(struct i2c_client *client) | 
|  | { | 
|  | max7359_write_reg(client, MAX7359_REG_CONFIG, | 
|  | MAX7359_CFG_INTERRUPT | /* Irq clears after host read */ | 
|  | MAX7359_CFG_KEY_RELEASE | /* Key release enable */ | 
|  | MAX7359_CFG_WAKEUP); /* Key press wakeup enable */ | 
|  |  | 
|  | /* Full key-scan functionality */ | 
|  | max7359_write_reg(client, MAX7359_REG_DEBOUNCE, 0x1F); | 
|  |  | 
|  | /* nINT asserts every debounce cycles */ | 
|  | max7359_write_reg(client, MAX7359_REG_INTERRUPT, 0x01); | 
|  |  | 
|  | max7359_fall_deepsleep(client); | 
|  | } | 
|  |  | 
|  | static int __devinit max7359_probe(struct i2c_client *client, | 
|  | const struct i2c_device_id *id) | 
|  | { | 
|  | const struct matrix_keymap_data *keymap_data = client->dev.platform_data; | 
|  | struct max7359_keypad *keypad; | 
|  | struct input_dev *input_dev; | 
|  | int ret; | 
|  | int error; | 
|  |  | 
|  | if (!client->irq) { | 
|  | dev_err(&client->dev, "The irq number should not be zero\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | /* Detect MAX7359: The initial Keys FIFO value is '0x3F' */ | 
|  | ret = max7359_read_reg(client, MAX7359_REG_KEYFIFO); | 
|  | if (ret < 0) { | 
|  | dev_err(&client->dev, "failed to detect device\n"); | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | dev_dbg(&client->dev, "keys FIFO is 0x%02x\n", ret); | 
|  |  | 
|  | keypad = kzalloc(sizeof(struct max7359_keypad), GFP_KERNEL); | 
|  | input_dev = input_allocate_device(); | 
|  | if (!keypad || !input_dev) { | 
|  | dev_err(&client->dev, "failed to allocate memory\n"); | 
|  | error = -ENOMEM; | 
|  | goto failed_free_mem; | 
|  | } | 
|  |  | 
|  | keypad->client = client; | 
|  | keypad->input_dev = input_dev; | 
|  |  | 
|  | input_dev->name = client->name; | 
|  | input_dev->id.bustype = BUS_I2C; | 
|  | input_dev->open = max7359_open; | 
|  | input_dev->close = max7359_close; | 
|  | input_dev->dev.parent = &client->dev; | 
|  |  | 
|  | input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP); | 
|  | input_dev->keycodesize = sizeof(keypad->keycodes[0]); | 
|  | input_dev->keycodemax = ARRAY_SIZE(keypad->keycodes); | 
|  | input_dev->keycode = keypad->keycodes; | 
|  |  | 
|  | input_set_capability(input_dev, EV_MSC, MSC_SCAN); | 
|  | input_set_drvdata(input_dev, keypad); | 
|  |  | 
|  | max7359_build_keycode(keypad, keymap_data); | 
|  |  | 
|  | error = request_threaded_irq(client->irq, NULL, max7359_interrupt, | 
|  | IRQF_TRIGGER_LOW | IRQF_ONESHOT, | 
|  | client->name, keypad); | 
|  | if (error) { | 
|  | dev_err(&client->dev, "failed to register interrupt\n"); | 
|  | goto failed_free_mem; | 
|  | } | 
|  |  | 
|  | /* Register the input device */ | 
|  | error = input_register_device(input_dev); | 
|  | if (error) { | 
|  | dev_err(&client->dev, "failed to register input device\n"); | 
|  | goto failed_free_irq; | 
|  | } | 
|  |  | 
|  | /* Initialize MAX7359 */ | 
|  | max7359_initialize(client); | 
|  |  | 
|  | i2c_set_clientdata(client, keypad); | 
|  | device_init_wakeup(&client->dev, 1); | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | failed_free_irq: | 
|  | free_irq(client->irq, keypad); | 
|  | failed_free_mem: | 
|  | input_free_device(input_dev); | 
|  | kfree(keypad); | 
|  | return error; | 
|  | } | 
|  |  | 
|  | static int __devexit max7359_remove(struct i2c_client *client) | 
|  | { | 
|  | struct max7359_keypad *keypad = i2c_get_clientdata(client); | 
|  |  | 
|  | free_irq(client->irq, keypad); | 
|  | input_unregister_device(keypad->input_dev); | 
|  | i2c_set_clientdata(client, NULL); | 
|  | kfree(keypad); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_PM | 
|  | static int max7359_suspend(struct i2c_client *client, pm_message_t mesg) | 
|  | { | 
|  | max7359_fall_deepsleep(client); | 
|  |  | 
|  | if (device_may_wakeup(&client->dev)) | 
|  | enable_irq_wake(client->irq); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int max7359_resume(struct i2c_client *client) | 
|  | { | 
|  | if (device_may_wakeup(&client->dev)) | 
|  | disable_irq_wake(client->irq); | 
|  |  | 
|  | /* Restore the default setting */ | 
|  | max7359_take_catnap(client); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | #else | 
|  | #define max7359_suspend	NULL | 
|  | #define max7359_resume	NULL | 
|  | #endif | 
|  |  | 
|  | static const struct i2c_device_id max7359_ids[] = { | 
|  | { "max7359", 0 }, | 
|  | { } | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(i2c, max7359_ids); | 
|  |  | 
|  | static struct i2c_driver max7359_i2c_driver = { | 
|  | .driver = { | 
|  | .name = "max7359", | 
|  | }, | 
|  | .probe		= max7359_probe, | 
|  | .remove		= __devexit_p(max7359_remove), | 
|  | .suspend	= max7359_suspend, | 
|  | .resume		= max7359_resume, | 
|  | .id_table	= max7359_ids, | 
|  | }; | 
|  |  | 
|  | static int __init max7359_init(void) | 
|  | { | 
|  | return i2c_add_driver(&max7359_i2c_driver); | 
|  | } | 
|  | module_init(max7359_init); | 
|  |  | 
|  | static void __exit max7359_exit(void) | 
|  | { | 
|  | i2c_del_driver(&max7359_i2c_driver); | 
|  | } | 
|  | module_exit(max7359_exit); | 
|  |  | 
|  | MODULE_AUTHOR("Kim Kyuwon <q1.kim@samsung.com>"); | 
|  | MODULE_DESCRIPTION("MAX7359 Key Switch Controller Driver"); | 
|  | MODULE_LICENSE("GPL v2"); |