|  | /* | 
|  | *  linux/drivers/message/fusion/mptspi.c | 
|  | *      For use with LSI PCI chip/adapter(s) | 
|  | *      running LSI Fusion MPT (Message Passing Technology) firmware. | 
|  | * | 
|  | *  Copyright (c) 1999-2008 LSI Corporation | 
|  | *  (mailto:DL-MPTFusionLinux@lsi.com) | 
|  | * | 
|  | */ | 
|  | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ | 
|  | /* | 
|  | This program is free software; you can redistribute it and/or modify | 
|  | it under the terms of the GNU General Public License as published by | 
|  | the Free Software Foundation; version 2 of the License. | 
|  |  | 
|  | This program is distributed in the hope that it will be useful, | 
|  | but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
|  | GNU General Public License for more details. | 
|  |  | 
|  | NO WARRANTY | 
|  | THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR | 
|  | CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT | 
|  | LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, | 
|  | MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is | 
|  | solely responsible for determining the appropriateness of using and | 
|  | distributing the Program and assumes all risks associated with its | 
|  | exercise of rights under this Agreement, including but not limited to | 
|  | the risks and costs of program errors, damage to or loss of data, | 
|  | programs or equipment, and unavailability or interruption of operations. | 
|  |  | 
|  | DISCLAIMER OF LIABILITY | 
|  | NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY | 
|  | DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL | 
|  | DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND | 
|  | ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR | 
|  | TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE | 
|  | USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED | 
|  | HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES | 
|  |  | 
|  | You should have received a copy of the GNU General Public License | 
|  | along with this program; if not, write to the Free Software | 
|  | Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA | 
|  | */ | 
|  | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ | 
|  |  | 
|  | #include <linux/module.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/errno.h> | 
|  | #include <linux/kdev_t.h> | 
|  | #include <linux/blkdev.h> | 
|  | #include <linux/delay.h>	/* for mdelay */ | 
|  | #include <linux/interrupt.h>	/* needed for in_interrupt() proto */ | 
|  | #include <linux/reboot.h>	/* notifier code */ | 
|  | #include <linux/workqueue.h> | 
|  | #include <linux/raid_class.h> | 
|  |  | 
|  | #include <scsi/scsi.h> | 
|  | #include <scsi/scsi_cmnd.h> | 
|  | #include <scsi/scsi_device.h> | 
|  | #include <scsi/scsi_host.h> | 
|  | #include <scsi/scsi_tcq.h> | 
|  | #include <scsi/scsi_transport.h> | 
|  | #include <scsi/scsi_transport_spi.h> | 
|  | #include <scsi/scsi_dbg.h> | 
|  |  | 
|  | #include "mptbase.h" | 
|  | #include "mptscsih.h" | 
|  |  | 
|  | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ | 
|  | #define my_NAME		"Fusion MPT SPI Host driver" | 
|  | #define my_VERSION	MPT_LINUX_VERSION_COMMON | 
|  | #define MYNAM		"mptspi" | 
|  |  | 
|  | MODULE_AUTHOR(MODULEAUTHOR); | 
|  | MODULE_DESCRIPTION(my_NAME); | 
|  | MODULE_LICENSE("GPL"); | 
|  | MODULE_VERSION(my_VERSION); | 
|  |  | 
|  | /* Command line args */ | 
|  | static int mpt_saf_te = MPTSCSIH_SAF_TE; | 
|  | module_param(mpt_saf_te, int, 0); | 
|  | MODULE_PARM_DESC(mpt_saf_te, " Force enabling SEP Processor: enable=1  (default=MPTSCSIH_SAF_TE=0)"); | 
|  |  | 
|  | static void mptspi_write_offset(struct scsi_target *, int); | 
|  | static void mptspi_write_width(struct scsi_target *, int); | 
|  | static int mptspi_write_spi_device_pg1(struct scsi_target *, | 
|  | struct _CONFIG_PAGE_SCSI_DEVICE_1 *); | 
|  |  | 
|  | static struct scsi_transport_template *mptspi_transport_template = NULL; | 
|  |  | 
|  | static u8	mptspiDoneCtx = MPT_MAX_PROTOCOL_DRIVERS; | 
|  | static u8	mptspiTaskCtx = MPT_MAX_PROTOCOL_DRIVERS; | 
|  | static u8	mptspiInternalCtx = MPT_MAX_PROTOCOL_DRIVERS; /* Used only for internal commands */ | 
|  |  | 
|  | /** | 
|  | * 	mptspi_setTargetNegoParms  - Update the target negotiation parameters | 
|  | *	@hd: Pointer to a SCSI Host Structure | 
|  | *	@target: per target private data | 
|  | *	@sdev: SCSI device | 
|  | * | 
|  | * 	Update the target negotiation parameters based on the the Inquiry | 
|  | *	data, adapter capabilities, and NVRAM settings. | 
|  | **/ | 
|  | static void | 
|  | mptspi_setTargetNegoParms(MPT_SCSI_HOST *hd, VirtTarget *target, | 
|  | struct scsi_device *sdev) | 
|  | { | 
|  | MPT_ADAPTER *ioc = hd->ioc; | 
|  | SpiCfgData *pspi_data = &ioc->spi_data; | 
|  | int  id = (int) target->id; | 
|  | int  nvram; | 
|  | u8 width = MPT_NARROW; | 
|  | u8 factor = MPT_ASYNC; | 
|  | u8 offset = 0; | 
|  | u8 nfactor; | 
|  | u8 noQas = 1; | 
|  |  | 
|  | target->negoFlags = pspi_data->noQas; | 
|  |  | 
|  | if (sdev->scsi_level < SCSI_2) { | 
|  | width = 0; | 
|  | factor = MPT_ULTRA2; | 
|  | offset = pspi_data->maxSyncOffset; | 
|  | target->tflags &= ~MPT_TARGET_FLAGS_Q_YES; | 
|  | } else { | 
|  | if (scsi_device_wide(sdev)) | 
|  | width = 1; | 
|  |  | 
|  | if (scsi_device_sync(sdev)) { | 
|  | factor = pspi_data->minSyncFactor; | 
|  | if (!scsi_device_dt(sdev)) | 
|  | factor = MPT_ULTRA2; | 
|  | else { | 
|  | if (!scsi_device_ius(sdev) && | 
|  | !scsi_device_qas(sdev)) | 
|  | factor = MPT_ULTRA160; | 
|  | else { | 
|  | factor = MPT_ULTRA320; | 
|  | if (scsi_device_qas(sdev)) { | 
|  | ddvprintk(ioc, | 
|  | printk(MYIOC_s_DEBUG_FMT "Enabling QAS due to " | 
|  | "byte56=%02x on id=%d!\n", ioc->name, | 
|  | scsi_device_qas(sdev), id)); | 
|  | noQas = 0; | 
|  | } | 
|  | if (sdev->type == TYPE_TAPE && | 
|  | scsi_device_ius(sdev)) | 
|  | target->negoFlags |= MPT_TAPE_NEGO_IDP; | 
|  | } | 
|  | } | 
|  | offset = pspi_data->maxSyncOffset; | 
|  |  | 
|  | /* If RAID, never disable QAS | 
|  | * else if non RAID, do not disable | 
|  | *   QAS if bit 1 is set | 
|  | * bit 1 QAS support, non-raid only | 
|  | * bit 0 IU support | 
|  | */ | 
|  | if (target->raidVolume == 1) | 
|  | noQas = 0; | 
|  | } else { | 
|  | factor = MPT_ASYNC; | 
|  | offset = 0; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (!sdev->tagged_supported) | 
|  | target->tflags &= ~MPT_TARGET_FLAGS_Q_YES; | 
|  |  | 
|  | /* Update tflags based on NVRAM settings. (SCSI only) | 
|  | */ | 
|  | if (pspi_data->nvram && (pspi_data->nvram[id] != MPT_HOST_NVRAM_INVALID)) { | 
|  | nvram = pspi_data->nvram[id]; | 
|  | nfactor = (nvram & MPT_NVRAM_SYNC_MASK) >> 8; | 
|  |  | 
|  | if (width) | 
|  | width = nvram & MPT_NVRAM_WIDE_DISABLE ? 0 : 1; | 
|  |  | 
|  | if (offset > 0) { | 
|  | /* Ensure factor is set to the | 
|  | * maximum of: adapter, nvram, inquiry | 
|  | */ | 
|  | if (nfactor) { | 
|  | if (nfactor < pspi_data->minSyncFactor ) | 
|  | nfactor = pspi_data->minSyncFactor; | 
|  |  | 
|  | factor = max(factor, nfactor); | 
|  | if (factor == MPT_ASYNC) | 
|  | offset = 0; | 
|  | } else { | 
|  | offset = 0; | 
|  | factor = MPT_ASYNC; | 
|  | } | 
|  | } else { | 
|  | factor = MPT_ASYNC; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Make sure data is consistent | 
|  | */ | 
|  | if ((!width) && (factor < MPT_ULTRA2)) | 
|  | factor = MPT_ULTRA2; | 
|  |  | 
|  | /* Save the data to the target structure. | 
|  | */ | 
|  | target->minSyncFactor = factor; | 
|  | target->maxOffset = offset; | 
|  | target->maxWidth = width; | 
|  |  | 
|  | target->tflags |= MPT_TARGET_FLAGS_VALID_NEGO; | 
|  |  | 
|  | /* Disable unused features. | 
|  | */ | 
|  | if (!width) | 
|  | target->negoFlags |= MPT_TARGET_NO_NEGO_WIDE; | 
|  |  | 
|  | if (!offset) | 
|  | target->negoFlags |= MPT_TARGET_NO_NEGO_SYNC; | 
|  |  | 
|  | if ( factor > MPT_ULTRA320 ) | 
|  | noQas = 0; | 
|  |  | 
|  | if (noQas && (pspi_data->noQas == 0)) { | 
|  | pspi_data->noQas |= MPT_TARGET_NO_NEGO_QAS; | 
|  | target->negoFlags |= MPT_TARGET_NO_NEGO_QAS; | 
|  |  | 
|  | /* Disable QAS in a mixed configuration case | 
|  | */ | 
|  |  | 
|  | ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT | 
|  | "Disabling QAS due to noQas=%02x on id=%d!\n", ioc->name, noQas, id)); | 
|  | } | 
|  | } | 
|  |  | 
|  | /** | 
|  | * 	mptspi_writeIOCPage4  - write IOC Page 4 | 
|  | *	@hd: Pointer to a SCSI Host Structure | 
|  | *	@channel: channel number | 
|  | *	@id: write IOC Page4 for this ID & Bus | 
|  | * | 
|  | *	Return: -EAGAIN if unable to obtain a Message Frame | 
|  | *		or 0 if success. | 
|  | * | 
|  | *	Remark: We do not wait for a return, write pages sequentially. | 
|  | **/ | 
|  | static int | 
|  | mptspi_writeIOCPage4(MPT_SCSI_HOST *hd, u8 channel , u8 id) | 
|  | { | 
|  | MPT_ADAPTER		*ioc = hd->ioc; | 
|  | Config_t		*pReq; | 
|  | IOCPage4_t		*IOCPage4Ptr; | 
|  | MPT_FRAME_HDR		*mf; | 
|  | dma_addr_t		 dataDma; | 
|  | u16			 req_idx; | 
|  | u32			 frameOffset; | 
|  | u32			 flagsLength; | 
|  | int			 ii; | 
|  |  | 
|  | /* Get a MF for this command. | 
|  | */ | 
|  | if ((mf = mpt_get_msg_frame(ioc->DoneCtx, ioc)) == NULL) { | 
|  | dfailprintk(ioc, printk(MYIOC_s_WARN_FMT | 
|  | "writeIOCPage4 : no msg frames!\n",ioc->name)); | 
|  | return -EAGAIN; | 
|  | } | 
|  |  | 
|  | /* Set the request and the data pointers. | 
|  | * Place data at end of MF. | 
|  | */ | 
|  | pReq = (Config_t *)mf; | 
|  |  | 
|  | req_idx = le16_to_cpu(mf->u.frame.hwhdr.msgctxu.fld.req_idx); | 
|  | frameOffset = ioc->req_sz - sizeof(IOCPage4_t); | 
|  |  | 
|  | /* Complete the request frame (same for all requests). | 
|  | */ | 
|  | pReq->Action = MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT; | 
|  | pReq->Reserved = 0; | 
|  | pReq->ChainOffset = 0; | 
|  | pReq->Function = MPI_FUNCTION_CONFIG; | 
|  | pReq->ExtPageLength = 0; | 
|  | pReq->ExtPageType = 0; | 
|  | pReq->MsgFlags = 0; | 
|  | for (ii=0; ii < 8; ii++) { | 
|  | pReq->Reserved2[ii] = 0; | 
|  | } | 
|  |  | 
|  | IOCPage4Ptr = ioc->spi_data.pIocPg4; | 
|  | dataDma = ioc->spi_data.IocPg4_dma; | 
|  | ii = IOCPage4Ptr->ActiveSEP++; | 
|  | IOCPage4Ptr->SEP[ii].SEPTargetID = id; | 
|  | IOCPage4Ptr->SEP[ii].SEPBus = channel; | 
|  | pReq->Header = IOCPage4Ptr->Header; | 
|  | pReq->PageAddress = cpu_to_le32(id | (channel << 8 )); | 
|  |  | 
|  | /* Add a SGE to the config request. | 
|  | */ | 
|  | flagsLength = MPT_SGE_FLAGS_SSIMPLE_WRITE | | 
|  | (IOCPage4Ptr->Header.PageLength + ii) * 4; | 
|  |  | 
|  | ioc->add_sge((char *)&pReq->PageBufferSGE, flagsLength, dataDma); | 
|  |  | 
|  | ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT | 
|  | "writeIOCPage4: MaxSEP=%d ActiveSEP=%d id=%d bus=%d\n", | 
|  | ioc->name, IOCPage4Ptr->MaxSEP, IOCPage4Ptr->ActiveSEP, id, channel)); | 
|  |  | 
|  | mpt_put_msg_frame(ioc->DoneCtx, ioc, mf); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | *	mptspi_initTarget - Target, LUN alloc/free functionality. | 
|  | *	@hd: Pointer to MPT_SCSI_HOST structure | 
|  | *	@vtarget: per target private data | 
|  | *	@sdev: SCSI device | 
|  | * | 
|  | *	NOTE: It's only SAFE to call this routine if data points to | 
|  | *	sane & valid STANDARD INQUIRY data! | 
|  | * | 
|  | *	Allocate and initialize memory for this target. | 
|  | *	Save inquiry data. | 
|  | * | 
|  | **/ | 
|  | static void | 
|  | mptspi_initTarget(MPT_SCSI_HOST *hd, VirtTarget *vtarget, | 
|  | struct scsi_device *sdev) | 
|  | { | 
|  |  | 
|  | /* Is LUN supported? If so, upper 2 bits will be 0 | 
|  | * in first byte of inquiry data. | 
|  | */ | 
|  | if (sdev->inq_periph_qual != 0) | 
|  | return; | 
|  |  | 
|  | if (vtarget == NULL) | 
|  | return; | 
|  |  | 
|  | vtarget->type = sdev->type; | 
|  |  | 
|  | if ((sdev->type == TYPE_PROCESSOR) && (hd->ioc->spi_data.Saf_Te)) { | 
|  | /* Treat all Processors as SAF-TE if | 
|  | * command line option is set */ | 
|  | vtarget->tflags |= MPT_TARGET_FLAGS_SAF_TE_ISSUED; | 
|  | mptspi_writeIOCPage4(hd, vtarget->channel, vtarget->id); | 
|  | }else if ((sdev->type == TYPE_PROCESSOR) && | 
|  | !(vtarget->tflags & MPT_TARGET_FLAGS_SAF_TE_ISSUED )) { | 
|  | if (sdev->inquiry_len > 49 ) { | 
|  | if (sdev->inquiry[44] == 'S' && | 
|  | sdev->inquiry[45] == 'A' && | 
|  | sdev->inquiry[46] == 'F' && | 
|  | sdev->inquiry[47] == '-' && | 
|  | sdev->inquiry[48] == 'T' && | 
|  | sdev->inquiry[49] == 'E' ) { | 
|  | vtarget->tflags |= MPT_TARGET_FLAGS_SAF_TE_ISSUED; | 
|  | mptspi_writeIOCPage4(hd, vtarget->channel, vtarget->id); | 
|  | } | 
|  | } | 
|  | } | 
|  | mptspi_setTargetNegoParms(hd, vtarget, sdev); | 
|  | } | 
|  |  | 
|  | /** | 
|  | *	mptspi_is_raid - Determines whether target is belonging to volume | 
|  | *	@hd: Pointer to a SCSI HOST structure | 
|  | *	@id: target device id | 
|  | * | 
|  | *	Return: | 
|  | *		non-zero = true | 
|  | *		zero = false | 
|  | * | 
|  | */ | 
|  | static int | 
|  | mptspi_is_raid(struct _MPT_SCSI_HOST *hd, u32 id) | 
|  | { | 
|  | int i, rc = 0; | 
|  | MPT_ADAPTER *ioc = hd->ioc; | 
|  |  | 
|  | if (!ioc->raid_data.pIocPg2) | 
|  | goto out; | 
|  |  | 
|  | if (!ioc->raid_data.pIocPg2->NumActiveVolumes) | 
|  | goto out; | 
|  | for (i=0; i < ioc->raid_data.pIocPg2->NumActiveVolumes; i++) { | 
|  | if (ioc->raid_data.pIocPg2->RaidVolume[i].VolumeID == id) { | 
|  | rc = 1; | 
|  | goto out; | 
|  | } | 
|  | } | 
|  |  | 
|  | out: | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | static int mptspi_target_alloc(struct scsi_target *starget) | 
|  | { | 
|  | struct Scsi_Host *shost = dev_to_shost(&starget->dev); | 
|  | struct _MPT_SCSI_HOST *hd = shost_priv(shost); | 
|  | VirtTarget		*vtarget; | 
|  | MPT_ADAPTER *ioc; | 
|  |  | 
|  | if (hd == NULL) | 
|  | return -ENODEV; | 
|  |  | 
|  | ioc = hd->ioc; | 
|  | vtarget = kzalloc(sizeof(VirtTarget), GFP_KERNEL); | 
|  | if (!vtarget) | 
|  | return -ENOMEM; | 
|  |  | 
|  | vtarget->ioc_id = ioc->id; | 
|  | vtarget->tflags = MPT_TARGET_FLAGS_Q_YES; | 
|  | vtarget->id = (u8)starget->id; | 
|  | vtarget->channel = (u8)starget->channel; | 
|  | vtarget->starget = starget; | 
|  | starget->hostdata = vtarget; | 
|  |  | 
|  | if (starget->channel == 1) { | 
|  | if (mptscsih_is_phys_disk(ioc, 0, starget->id) == 0) | 
|  | return 0; | 
|  | vtarget->tflags |= MPT_TARGET_FLAGS_RAID_COMPONENT; | 
|  | /* The real channel for this device is zero */ | 
|  | vtarget->channel = 0; | 
|  | /* The actual physdisknum (for RAID passthrough) */ | 
|  | vtarget->id = mptscsih_raid_id_to_num(ioc, 0, | 
|  | starget->id); | 
|  | } | 
|  |  | 
|  | if (starget->channel == 0 && | 
|  | mptspi_is_raid(hd, starget->id)) { | 
|  | vtarget->raidVolume = 1; | 
|  | ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT | 
|  | "RAID Volume @ channel=%d id=%d\n", ioc->name, starget->channel, | 
|  | starget->id)); | 
|  | } | 
|  |  | 
|  | if (ioc->spi_data.nvram && | 
|  | ioc->spi_data.nvram[starget->id] != MPT_HOST_NVRAM_INVALID) { | 
|  | u32 nvram = ioc->spi_data.nvram[starget->id]; | 
|  | spi_min_period(starget) = (nvram & MPT_NVRAM_SYNC_MASK) >> MPT_NVRAM_SYNC_SHIFT; | 
|  | spi_max_width(starget) = nvram & MPT_NVRAM_WIDE_DISABLE ? 0 : 1; | 
|  | } else { | 
|  | spi_min_period(starget) = ioc->spi_data.minSyncFactor; | 
|  | spi_max_width(starget) = ioc->spi_data.maxBusWidth; | 
|  | } | 
|  | spi_max_offset(starget) = ioc->spi_data.maxSyncOffset; | 
|  |  | 
|  | spi_offset(starget) = 0; | 
|  | spi_period(starget) = 0xFF; | 
|  | mptspi_write_width(starget, 0); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void | 
|  | mptspi_target_destroy(struct scsi_target *starget) | 
|  | { | 
|  | if (starget->hostdata) | 
|  | kfree(starget->hostdata); | 
|  | starget->hostdata = NULL; | 
|  | } | 
|  |  | 
|  | /** | 
|  | *	mptspi_print_write_nego - negotiation parameters debug info that is being sent | 
|  | *	@hd: Pointer to a SCSI HOST structure | 
|  | *	@starget: SCSI target | 
|  | *	@ii: negotiation parameters | 
|  | * | 
|  | */ | 
|  | static void | 
|  | mptspi_print_write_nego(struct _MPT_SCSI_HOST *hd, struct scsi_target *starget, u32 ii) | 
|  | { | 
|  | ddvprintk(hd->ioc, printk(MYIOC_s_DEBUG_FMT "id=%d Requested = 0x%08x" | 
|  | " ( %s factor = 0x%02x @ offset = 0x%02x %s%s%s%s%s%s%s%s)\n", | 
|  | hd->ioc->name, starget->id, ii, | 
|  | ii & MPI_SCSIDEVPAGE0_NP_WIDE ? "Wide ": "", | 
|  | ((ii >> 8) & 0xFF), ((ii >> 16) & 0xFF), | 
|  | ii & MPI_SCSIDEVPAGE0_NP_IU ? "IU ": "", | 
|  | ii & MPI_SCSIDEVPAGE0_NP_DT ? "DT ": "", | 
|  | ii & MPI_SCSIDEVPAGE0_NP_QAS ? "QAS ": "", | 
|  | ii & MPI_SCSIDEVPAGE0_NP_HOLD_MCS ? "HOLDMCS ": "", | 
|  | ii & MPI_SCSIDEVPAGE0_NP_WR_FLOW ? "WRFLOW ": "", | 
|  | ii & MPI_SCSIDEVPAGE0_NP_RD_STRM ? "RDSTRM ": "", | 
|  | ii & MPI_SCSIDEVPAGE0_NP_RTI ? "RTI ": "", | 
|  | ii & MPI_SCSIDEVPAGE0_NP_PCOMP_EN ? "PCOMP ": "")); | 
|  | } | 
|  |  | 
|  | /** | 
|  | *	mptspi_print_read_nego - negotiation parameters debug info that is being read | 
|  | *	@hd: Pointer to a SCSI HOST structure | 
|  | *	@starget: SCSI target | 
|  | *	@ii: negotiation parameters | 
|  | * | 
|  | */ | 
|  | static void | 
|  | mptspi_print_read_nego(struct _MPT_SCSI_HOST *hd, struct scsi_target *starget, u32 ii) | 
|  | { | 
|  | ddvprintk(hd->ioc, printk(MYIOC_s_DEBUG_FMT "id=%d Read = 0x%08x" | 
|  | " ( %s factor = 0x%02x @ offset = 0x%02x %s%s%s%s%s%s%s%s)\n", | 
|  | hd->ioc->name, starget->id, ii, | 
|  | ii & MPI_SCSIDEVPAGE0_NP_WIDE ? "Wide ": "", | 
|  | ((ii >> 8) & 0xFF), ((ii >> 16) & 0xFF), | 
|  | ii & MPI_SCSIDEVPAGE0_NP_IU ? "IU ": "", | 
|  | ii & MPI_SCSIDEVPAGE0_NP_DT ? "DT ": "", | 
|  | ii & MPI_SCSIDEVPAGE0_NP_QAS ? "QAS ": "", | 
|  | ii & MPI_SCSIDEVPAGE0_NP_HOLD_MCS ? "HOLDMCS ": "", | 
|  | ii & MPI_SCSIDEVPAGE0_NP_WR_FLOW ? "WRFLOW ": "", | 
|  | ii & MPI_SCSIDEVPAGE0_NP_RD_STRM ? "RDSTRM ": "", | 
|  | ii & MPI_SCSIDEVPAGE0_NP_RTI ? "RTI ": "", | 
|  | ii & MPI_SCSIDEVPAGE0_NP_PCOMP_EN ? "PCOMP ": "")); | 
|  | } | 
|  |  | 
|  | static int mptspi_read_spi_device_pg0(struct scsi_target *starget, | 
|  | struct _CONFIG_PAGE_SCSI_DEVICE_0 *pass_pg0) | 
|  | { | 
|  | struct Scsi_Host *shost = dev_to_shost(&starget->dev); | 
|  | struct _MPT_SCSI_HOST *hd = shost_priv(shost); | 
|  | struct _MPT_ADAPTER *ioc = hd->ioc; | 
|  | struct _CONFIG_PAGE_SCSI_DEVICE_0 *spi_dev_pg0; | 
|  | dma_addr_t spi_dev_pg0_dma; | 
|  | int size; | 
|  | struct _x_config_parms cfg; | 
|  | struct _CONFIG_PAGE_HEADER hdr; | 
|  | int err = -EBUSY; | 
|  |  | 
|  | /* No SPI parameters for RAID devices */ | 
|  | if (starget->channel == 0 && | 
|  | mptspi_is_raid(hd, starget->id)) | 
|  | return -1; | 
|  |  | 
|  | size = ioc->spi_data.sdp0length * 4; | 
|  | /* | 
|  | if (ioc->spi_data.sdp0length & 1) | 
|  | size += size + 4; | 
|  | size += 2048; | 
|  | */ | 
|  |  | 
|  | spi_dev_pg0 = dma_alloc_coherent(&ioc->pcidev->dev, size, &spi_dev_pg0_dma, GFP_KERNEL); | 
|  | if (spi_dev_pg0 == NULL) { | 
|  | starget_printk(KERN_ERR, starget, MYIOC_s_FMT | 
|  | "dma_alloc_coherent for parameters failed\n", ioc->name); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | memset(&hdr, 0, sizeof(hdr)); | 
|  |  | 
|  | hdr.PageVersion = ioc->spi_data.sdp0version; | 
|  | hdr.PageLength = ioc->spi_data.sdp0length; | 
|  | hdr.PageNumber = 0; | 
|  | hdr.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE; | 
|  |  | 
|  | memset(&cfg, 0, sizeof(cfg)); | 
|  |  | 
|  | cfg.cfghdr.hdr = &hdr; | 
|  | cfg.physAddr = spi_dev_pg0_dma; | 
|  | cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; | 
|  | cfg.dir = 0; | 
|  | cfg.pageAddr = starget->id; | 
|  |  | 
|  | if (mpt_config(ioc, &cfg)) { | 
|  | starget_printk(KERN_ERR, starget, MYIOC_s_FMT "mpt_config failed\n", ioc->name); | 
|  | goto out_free; | 
|  | } | 
|  | err = 0; | 
|  | memcpy(pass_pg0, spi_dev_pg0, size); | 
|  |  | 
|  | mptspi_print_read_nego(hd, starget, le32_to_cpu(spi_dev_pg0->NegotiatedParameters)); | 
|  |  | 
|  | out_free: | 
|  | dma_free_coherent(&ioc->pcidev->dev, size, spi_dev_pg0, spi_dev_pg0_dma); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static u32 mptspi_getRP(struct scsi_target *starget) | 
|  | { | 
|  | u32 nego = 0; | 
|  |  | 
|  | nego |= spi_iu(starget) ? MPI_SCSIDEVPAGE1_RP_IU : 0; | 
|  | nego |= spi_dt(starget) ? MPI_SCSIDEVPAGE1_RP_DT : 0; | 
|  | nego |= spi_qas(starget) ? MPI_SCSIDEVPAGE1_RP_QAS : 0; | 
|  | nego |= spi_hold_mcs(starget) ? MPI_SCSIDEVPAGE1_RP_HOLD_MCS : 0; | 
|  | nego |= spi_wr_flow(starget) ? MPI_SCSIDEVPAGE1_RP_WR_FLOW : 0; | 
|  | nego |= spi_rd_strm(starget) ? MPI_SCSIDEVPAGE1_RP_RD_STRM : 0; | 
|  | nego |= spi_rti(starget) ? MPI_SCSIDEVPAGE1_RP_RTI : 0; | 
|  | nego |= spi_pcomp_en(starget) ? MPI_SCSIDEVPAGE1_RP_PCOMP_EN : 0; | 
|  |  | 
|  | nego |= (spi_period(starget) <<  MPI_SCSIDEVPAGE1_RP_SHIFT_MIN_SYNC_PERIOD) & MPI_SCSIDEVPAGE1_RP_MIN_SYNC_PERIOD_MASK; | 
|  | nego |= (spi_offset(starget) << MPI_SCSIDEVPAGE1_RP_SHIFT_MAX_SYNC_OFFSET) & MPI_SCSIDEVPAGE1_RP_MAX_SYNC_OFFSET_MASK; | 
|  | nego |= spi_width(starget) ?  MPI_SCSIDEVPAGE1_RP_WIDE : 0; | 
|  |  | 
|  | return nego; | 
|  | } | 
|  |  | 
|  | static void mptspi_read_parameters(struct scsi_target *starget) | 
|  | { | 
|  | int nego; | 
|  | struct _CONFIG_PAGE_SCSI_DEVICE_0 spi_dev_pg0; | 
|  |  | 
|  | mptspi_read_spi_device_pg0(starget, &spi_dev_pg0); | 
|  |  | 
|  | nego = le32_to_cpu(spi_dev_pg0.NegotiatedParameters); | 
|  |  | 
|  | spi_iu(starget) = (nego & MPI_SCSIDEVPAGE0_NP_IU) ? 1 : 0; | 
|  | spi_dt(starget) = (nego & MPI_SCSIDEVPAGE0_NP_DT) ? 1 : 0; | 
|  | spi_qas(starget) = (nego & MPI_SCSIDEVPAGE0_NP_QAS) ? 1 : 0; | 
|  | spi_wr_flow(starget) = (nego & MPI_SCSIDEVPAGE0_NP_WR_FLOW) ? 1 : 0; | 
|  | spi_rd_strm(starget) = (nego & MPI_SCSIDEVPAGE0_NP_RD_STRM) ? 1 : 0; | 
|  | spi_rti(starget) = (nego & MPI_SCSIDEVPAGE0_NP_RTI) ? 1 : 0; | 
|  | spi_pcomp_en(starget) = (nego & MPI_SCSIDEVPAGE0_NP_PCOMP_EN) ? 1 : 0; | 
|  | spi_hold_mcs(starget) = (nego & MPI_SCSIDEVPAGE0_NP_HOLD_MCS) ? 1 : 0; | 
|  | spi_period(starget) = (nego & MPI_SCSIDEVPAGE0_NP_NEG_SYNC_PERIOD_MASK) >> MPI_SCSIDEVPAGE0_NP_SHIFT_SYNC_PERIOD; | 
|  | spi_offset(starget) = (nego & MPI_SCSIDEVPAGE0_NP_NEG_SYNC_OFFSET_MASK) >> MPI_SCSIDEVPAGE0_NP_SHIFT_SYNC_OFFSET; | 
|  | spi_width(starget) = (nego & MPI_SCSIDEVPAGE0_NP_WIDE) ? 1 : 0; | 
|  | } | 
|  |  | 
|  | int | 
|  | mptscsih_quiesce_raid(MPT_SCSI_HOST *hd, int quiesce, u8 channel, u8 id) | 
|  | { | 
|  | MPT_ADAPTER	*ioc = hd->ioc; | 
|  | MpiRaidActionRequest_t	*pReq; | 
|  | MPT_FRAME_HDR		*mf; | 
|  | int			ret; | 
|  | unsigned long 	 	timeleft; | 
|  |  | 
|  | mutex_lock(&ioc->internal_cmds.mutex); | 
|  |  | 
|  | /* Get and Populate a free Frame | 
|  | */ | 
|  | if ((mf = mpt_get_msg_frame(ioc->InternalCtx, ioc)) == NULL) { | 
|  | dfailprintk(hd->ioc, printk(MYIOC_s_WARN_FMT | 
|  | "%s: no msg frames!\n", ioc->name, __func__)); | 
|  | ret = -EAGAIN; | 
|  | goto out; | 
|  | } | 
|  | pReq = (MpiRaidActionRequest_t *)mf; | 
|  | if (quiesce) | 
|  | pReq->Action = MPI_RAID_ACTION_QUIESCE_PHYS_IO; | 
|  | else | 
|  | pReq->Action = MPI_RAID_ACTION_ENABLE_PHYS_IO; | 
|  | pReq->Reserved1 = 0; | 
|  | pReq->ChainOffset = 0; | 
|  | pReq->Function = MPI_FUNCTION_RAID_ACTION; | 
|  | pReq->VolumeID = id; | 
|  | pReq->VolumeBus = channel; | 
|  | pReq->PhysDiskNum = 0; | 
|  | pReq->MsgFlags = 0; | 
|  | pReq->Reserved2 = 0; | 
|  | pReq->ActionDataWord = 0; /* Reserved for this action */ | 
|  |  | 
|  | ioc->add_sge((char *)&pReq->ActionDataSGE, | 
|  | MPT_SGE_FLAGS_SSIMPLE_READ | 0, (dma_addr_t) -1); | 
|  |  | 
|  | ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RAID Volume action=%x channel=%d id=%d\n", | 
|  | ioc->name, pReq->Action, channel, id)); | 
|  |  | 
|  | INITIALIZE_MGMT_STATUS(ioc->internal_cmds.status) | 
|  | mpt_put_msg_frame(ioc->InternalCtx, ioc, mf); | 
|  | timeleft = wait_for_completion_timeout(&ioc->internal_cmds.done, 10*HZ); | 
|  | if (!(ioc->internal_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) { | 
|  | ret = -ETIME; | 
|  | dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT "%s: TIMED OUT!\n", | 
|  | ioc->name, __func__)); | 
|  | if (ioc->internal_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET) | 
|  | goto out; | 
|  | if (!timeleft) { | 
|  | printk(MYIOC_s_WARN_FMT "Issuing Reset from %s!!\n", | 
|  | ioc->name, __func__); | 
|  | mpt_HardResetHandler(ioc, CAN_SLEEP); | 
|  | mpt_free_msg_frame(ioc, mf); | 
|  | } | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | ret = ioc->internal_cmds.completion_code; | 
|  |  | 
|  | out: | 
|  | CLEAR_MGMT_STATUS(ioc->internal_cmds.status) | 
|  | mutex_unlock(&ioc->internal_cmds.mutex); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void mptspi_dv_device(struct _MPT_SCSI_HOST *hd, | 
|  | struct scsi_device *sdev) | 
|  | { | 
|  | VirtTarget *vtarget = scsi_target(sdev)->hostdata; | 
|  | MPT_ADAPTER *ioc = hd->ioc; | 
|  |  | 
|  | /* no DV on RAID devices */ | 
|  | if (sdev->channel == 0 && | 
|  | mptspi_is_raid(hd, sdev->id)) | 
|  | return; | 
|  |  | 
|  | /* If this is a piece of a RAID, then quiesce first */ | 
|  | if (sdev->channel == 1 && | 
|  | mptscsih_quiesce_raid(hd, 1, vtarget->channel, vtarget->id) < 0) { | 
|  | starget_printk(KERN_ERR, scsi_target(sdev), MYIOC_s_FMT | 
|  | "Integrated RAID quiesce failed\n", ioc->name); | 
|  | return; | 
|  | } | 
|  |  | 
|  | hd->spi_pending |= (1 << sdev->id); | 
|  | spi_dv_device(sdev); | 
|  | hd->spi_pending &= ~(1 << sdev->id); | 
|  |  | 
|  | if (sdev->channel == 1 && | 
|  | mptscsih_quiesce_raid(hd, 0, vtarget->channel, vtarget->id) < 0) | 
|  | starget_printk(KERN_ERR, scsi_target(sdev), MYIOC_s_FMT | 
|  | "Integrated RAID resume failed\n", ioc->name); | 
|  |  | 
|  | mptspi_read_parameters(sdev->sdev_target); | 
|  | spi_display_xfer_agreement(sdev->sdev_target); | 
|  | mptspi_read_parameters(sdev->sdev_target); | 
|  | } | 
|  |  | 
|  | static int mptspi_slave_alloc(struct scsi_device *sdev) | 
|  | { | 
|  | MPT_SCSI_HOST *hd = shost_priv(sdev->host); | 
|  | VirtTarget		*vtarget; | 
|  | VirtDevice		*vdevice; | 
|  | struct scsi_target 	*starget; | 
|  | MPT_ADAPTER *ioc = hd->ioc; | 
|  |  | 
|  | if (sdev->channel == 1 && | 
|  | mptscsih_is_phys_disk(ioc, 0, sdev->id) == 0) | 
|  | return -ENXIO; | 
|  |  | 
|  | vdevice = kzalloc(sizeof(VirtDevice), GFP_KERNEL); | 
|  | if (!vdevice) { | 
|  | printk(MYIOC_s_ERR_FMT "slave_alloc kmalloc(%zd) FAILED!\n", | 
|  | ioc->name, sizeof(VirtDevice)); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | vdevice->lun = sdev->lun; | 
|  | sdev->hostdata = vdevice; | 
|  |  | 
|  | starget = scsi_target(sdev); | 
|  | vtarget = starget->hostdata; | 
|  | vdevice->vtarget = vtarget; | 
|  | vtarget->num_luns++; | 
|  |  | 
|  | if (sdev->channel == 1) | 
|  | sdev->no_uld_attach = 1; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int mptspi_slave_configure(struct scsi_device *sdev) | 
|  | { | 
|  | struct _MPT_SCSI_HOST *hd = shost_priv(sdev->host); | 
|  | VirtTarget *vtarget = scsi_target(sdev)->hostdata; | 
|  | int ret; | 
|  |  | 
|  | mptspi_initTarget(hd, vtarget, sdev); | 
|  |  | 
|  | ret = mptscsih_slave_configure(sdev); | 
|  |  | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | ddvprintk(hd->ioc, printk(MYIOC_s_DEBUG_FMT "id=%d min_period=0x%02x" | 
|  | " max_offset=0x%02x max_width=%d\n", hd->ioc->name, | 
|  | sdev->id, spi_min_period(scsi_target(sdev)), | 
|  | spi_max_offset(scsi_target(sdev)), | 
|  | spi_max_width(scsi_target(sdev)))); | 
|  |  | 
|  | if ((sdev->channel == 1 || | 
|  | !(mptspi_is_raid(hd, sdev->id))) && | 
|  | !spi_initial_dv(sdev->sdev_target)) | 
|  | mptspi_dv_device(hd, sdev); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int | 
|  | mptspi_qcmd(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *)) | 
|  | { | 
|  | struct _MPT_SCSI_HOST *hd = shost_priv(SCpnt->device->host); | 
|  | VirtDevice	*vdevice = SCpnt->device->hostdata; | 
|  | MPT_ADAPTER *ioc = hd->ioc; | 
|  |  | 
|  | if (!vdevice || !vdevice->vtarget) { | 
|  | SCpnt->result = DID_NO_CONNECT << 16; | 
|  | done(SCpnt); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | if (SCpnt->device->channel == 1 && | 
|  | mptscsih_is_phys_disk(ioc, 0, SCpnt->device->id) == 0) { | 
|  | SCpnt->result = DID_NO_CONNECT << 16; | 
|  | done(SCpnt); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | if (spi_dv_pending(scsi_target(SCpnt->device))) | 
|  | ddvprintk(ioc, scsi_print_command(SCpnt)); | 
|  |  | 
|  | return mptscsih_qcmd(SCpnt,done); | 
|  | } | 
|  |  | 
|  | static void mptspi_slave_destroy(struct scsi_device *sdev) | 
|  | { | 
|  | struct scsi_target *starget = scsi_target(sdev); | 
|  | VirtTarget *vtarget = starget->hostdata; | 
|  | VirtDevice *vdevice = sdev->hostdata; | 
|  |  | 
|  | /* Will this be the last lun on a non-raid device? */ | 
|  | if (vtarget->num_luns == 1 && vdevice->configured_lun) { | 
|  | struct _CONFIG_PAGE_SCSI_DEVICE_1 pg1; | 
|  |  | 
|  | /* Async Narrow */ | 
|  | pg1.RequestedParameters = 0; | 
|  | pg1.Reserved = 0; | 
|  | pg1.Configuration = 0; | 
|  |  | 
|  | mptspi_write_spi_device_pg1(starget, &pg1); | 
|  | } | 
|  |  | 
|  | mptscsih_slave_destroy(sdev); | 
|  | } | 
|  |  | 
|  | static struct scsi_host_template mptspi_driver_template = { | 
|  | .module				= THIS_MODULE, | 
|  | .proc_name			= "mptspi", | 
|  | .proc_info			= mptscsih_proc_info, | 
|  | .name				= "MPT SPI Host", | 
|  | .info				= mptscsih_info, | 
|  | .queuecommand			= mptspi_qcmd, | 
|  | .target_alloc			= mptspi_target_alloc, | 
|  | .slave_alloc			= mptspi_slave_alloc, | 
|  | .slave_configure		= mptspi_slave_configure, | 
|  | .target_destroy			= mptspi_target_destroy, | 
|  | .slave_destroy			= mptspi_slave_destroy, | 
|  | .change_queue_depth 		= mptscsih_change_queue_depth, | 
|  | .eh_abort_handler		= mptscsih_abort, | 
|  | .eh_device_reset_handler	= mptscsih_dev_reset, | 
|  | .eh_bus_reset_handler		= mptscsih_bus_reset, | 
|  | .eh_host_reset_handler		= mptscsih_host_reset, | 
|  | .bios_param			= mptscsih_bios_param, | 
|  | .can_queue			= MPT_SCSI_CAN_QUEUE, | 
|  | .this_id			= -1, | 
|  | .sg_tablesize			= MPT_SCSI_SG_DEPTH, | 
|  | .max_sectors			= 8192, | 
|  | .cmd_per_lun			= 7, | 
|  | .use_clustering			= ENABLE_CLUSTERING, | 
|  | .shost_attrs			= mptscsih_host_attrs, | 
|  | }; | 
|  |  | 
|  | static int mptspi_write_spi_device_pg1(struct scsi_target *starget, | 
|  | struct _CONFIG_PAGE_SCSI_DEVICE_1 *pass_pg1) | 
|  | { | 
|  | struct Scsi_Host *shost = dev_to_shost(&starget->dev); | 
|  | struct _MPT_SCSI_HOST *hd = shost_priv(shost); | 
|  | struct _MPT_ADAPTER *ioc = hd->ioc; | 
|  | struct _CONFIG_PAGE_SCSI_DEVICE_1 *pg1; | 
|  | dma_addr_t pg1_dma; | 
|  | int size; | 
|  | struct _x_config_parms cfg; | 
|  | struct _CONFIG_PAGE_HEADER hdr; | 
|  | int err = -EBUSY; | 
|  |  | 
|  | /* don't allow updating nego parameters on RAID devices */ | 
|  | if (starget->channel == 0 && | 
|  | mptspi_is_raid(hd, starget->id)) | 
|  | return -1; | 
|  |  | 
|  | size = ioc->spi_data.sdp1length * 4; | 
|  |  | 
|  | pg1 = dma_alloc_coherent(&ioc->pcidev->dev, size, &pg1_dma, GFP_KERNEL); | 
|  | if (pg1 == NULL) { | 
|  | starget_printk(KERN_ERR, starget, MYIOC_s_FMT | 
|  | "dma_alloc_coherent for parameters failed\n", ioc->name); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | memset(&hdr, 0, sizeof(hdr)); | 
|  |  | 
|  | hdr.PageVersion = ioc->spi_data.sdp1version; | 
|  | hdr.PageLength = ioc->spi_data.sdp1length; | 
|  | hdr.PageNumber = 1; | 
|  | hdr.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE; | 
|  |  | 
|  | memset(&cfg, 0, sizeof(cfg)); | 
|  |  | 
|  | cfg.cfghdr.hdr = &hdr; | 
|  | cfg.physAddr = pg1_dma; | 
|  | cfg.action = MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT; | 
|  | cfg.dir = 1; | 
|  | cfg.pageAddr = starget->id; | 
|  |  | 
|  | memcpy(pg1, pass_pg1, size); | 
|  |  | 
|  | pg1->Header.PageVersion = hdr.PageVersion; | 
|  | pg1->Header.PageLength = hdr.PageLength; | 
|  | pg1->Header.PageNumber = hdr.PageNumber; | 
|  | pg1->Header.PageType = hdr.PageType; | 
|  |  | 
|  | mptspi_print_write_nego(hd, starget, le32_to_cpu(pg1->RequestedParameters)); | 
|  |  | 
|  | if (mpt_config(ioc, &cfg)) { | 
|  | starget_printk(KERN_ERR, starget, MYIOC_s_FMT | 
|  | "mpt_config failed\n", ioc->name); | 
|  | goto out_free; | 
|  | } | 
|  | err = 0; | 
|  |  | 
|  | out_free: | 
|  | dma_free_coherent(&ioc->pcidev->dev, size, pg1, pg1_dma); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static void mptspi_write_offset(struct scsi_target *starget, int offset) | 
|  | { | 
|  | struct _CONFIG_PAGE_SCSI_DEVICE_1 pg1; | 
|  | u32 nego; | 
|  |  | 
|  | if (offset < 0) | 
|  | offset = 0; | 
|  |  | 
|  | if (offset > 255) | 
|  | offset = 255; | 
|  |  | 
|  | if (spi_offset(starget) == -1) | 
|  | mptspi_read_parameters(starget); | 
|  |  | 
|  | spi_offset(starget) = offset; | 
|  |  | 
|  | nego = mptspi_getRP(starget); | 
|  |  | 
|  | pg1.RequestedParameters = cpu_to_le32(nego); | 
|  | pg1.Reserved = 0; | 
|  | pg1.Configuration = 0; | 
|  |  | 
|  | mptspi_write_spi_device_pg1(starget, &pg1); | 
|  | } | 
|  |  | 
|  | static void mptspi_write_period(struct scsi_target *starget, int period) | 
|  | { | 
|  | struct _CONFIG_PAGE_SCSI_DEVICE_1 pg1; | 
|  | u32 nego; | 
|  |  | 
|  | if (period < 8) | 
|  | period = 8; | 
|  |  | 
|  | if (period > 255) | 
|  | period = 255; | 
|  |  | 
|  | if (spi_period(starget) == -1) | 
|  | mptspi_read_parameters(starget); | 
|  |  | 
|  | if (period == 8) { | 
|  | spi_iu(starget) = 1; | 
|  | spi_dt(starget) = 1; | 
|  | } else if (period == 9) { | 
|  | spi_dt(starget) = 1; | 
|  | } | 
|  |  | 
|  | spi_period(starget) = period; | 
|  |  | 
|  | nego = mptspi_getRP(starget); | 
|  |  | 
|  | pg1.RequestedParameters = cpu_to_le32(nego); | 
|  | pg1.Reserved = 0; | 
|  | pg1.Configuration = 0; | 
|  |  | 
|  | mptspi_write_spi_device_pg1(starget, &pg1); | 
|  | } | 
|  |  | 
|  | static void mptspi_write_dt(struct scsi_target *starget, int dt) | 
|  | { | 
|  | struct _CONFIG_PAGE_SCSI_DEVICE_1 pg1; | 
|  | u32 nego; | 
|  |  | 
|  | if (spi_period(starget) == -1) | 
|  | mptspi_read_parameters(starget); | 
|  |  | 
|  | if (!dt && spi_period(starget) < 10) | 
|  | spi_period(starget) = 10; | 
|  |  | 
|  | spi_dt(starget) = dt; | 
|  |  | 
|  | nego = mptspi_getRP(starget); | 
|  |  | 
|  |  | 
|  | pg1.RequestedParameters = cpu_to_le32(nego); | 
|  | pg1.Reserved = 0; | 
|  | pg1.Configuration = 0; | 
|  |  | 
|  | mptspi_write_spi_device_pg1(starget, &pg1); | 
|  | } | 
|  |  | 
|  | static void mptspi_write_iu(struct scsi_target *starget, int iu) | 
|  | { | 
|  | struct _CONFIG_PAGE_SCSI_DEVICE_1 pg1; | 
|  | u32 nego; | 
|  |  | 
|  | if (spi_period(starget) == -1) | 
|  | mptspi_read_parameters(starget); | 
|  |  | 
|  | if (!iu && spi_period(starget) < 9) | 
|  | spi_period(starget) = 9; | 
|  |  | 
|  | spi_iu(starget) = iu; | 
|  |  | 
|  | nego = mptspi_getRP(starget); | 
|  |  | 
|  | pg1.RequestedParameters = cpu_to_le32(nego); | 
|  | pg1.Reserved = 0; | 
|  | pg1.Configuration = 0; | 
|  |  | 
|  | mptspi_write_spi_device_pg1(starget, &pg1); | 
|  | } | 
|  |  | 
|  | #define MPTSPI_SIMPLE_TRANSPORT_PARM(parm) 				\ | 
|  | static void mptspi_write_##parm(struct scsi_target *starget, int parm)\ | 
|  | {									\ | 
|  | struct _CONFIG_PAGE_SCSI_DEVICE_1 pg1;				\ | 
|  | u32 nego;							\ | 
|  | \ | 
|  | spi_##parm(starget) = parm;					\ | 
|  | \ | 
|  | nego = mptspi_getRP(starget);					\ | 
|  | \ | 
|  | pg1.RequestedParameters = cpu_to_le32(nego);			\ | 
|  | pg1.Reserved = 0;						\ | 
|  | pg1.Configuration = 0;						\ | 
|  | \ | 
|  | mptspi_write_spi_device_pg1(starget, &pg1);				\ | 
|  | } | 
|  |  | 
|  | MPTSPI_SIMPLE_TRANSPORT_PARM(rd_strm) | 
|  | MPTSPI_SIMPLE_TRANSPORT_PARM(wr_flow) | 
|  | MPTSPI_SIMPLE_TRANSPORT_PARM(rti) | 
|  | MPTSPI_SIMPLE_TRANSPORT_PARM(hold_mcs) | 
|  | MPTSPI_SIMPLE_TRANSPORT_PARM(pcomp_en) | 
|  |  | 
|  | static void mptspi_write_qas(struct scsi_target *starget, int qas) | 
|  | { | 
|  | struct _CONFIG_PAGE_SCSI_DEVICE_1 pg1; | 
|  | struct Scsi_Host *shost = dev_to_shost(&starget->dev); | 
|  | struct _MPT_SCSI_HOST *hd = shost_priv(shost); | 
|  | VirtTarget *vtarget = starget->hostdata; | 
|  | u32 nego; | 
|  |  | 
|  | if ((vtarget->negoFlags & MPT_TARGET_NO_NEGO_QAS) || | 
|  | hd->ioc->spi_data.noQas) | 
|  | spi_qas(starget) = 0; | 
|  | else | 
|  | spi_qas(starget) = qas; | 
|  |  | 
|  | nego = mptspi_getRP(starget); | 
|  |  | 
|  | pg1.RequestedParameters = cpu_to_le32(nego); | 
|  | pg1.Reserved = 0; | 
|  | pg1.Configuration = 0; | 
|  |  | 
|  | mptspi_write_spi_device_pg1(starget, &pg1); | 
|  | } | 
|  |  | 
|  | static void mptspi_write_width(struct scsi_target *starget, int width) | 
|  | { | 
|  | struct _CONFIG_PAGE_SCSI_DEVICE_1 pg1; | 
|  | u32 nego; | 
|  |  | 
|  | if (!width) { | 
|  | spi_dt(starget) = 0; | 
|  | if (spi_period(starget) < 10) | 
|  | spi_period(starget) = 10; | 
|  | } | 
|  |  | 
|  | spi_width(starget) = width; | 
|  |  | 
|  | nego = mptspi_getRP(starget); | 
|  |  | 
|  | pg1.RequestedParameters = cpu_to_le32(nego); | 
|  | pg1.Reserved = 0; | 
|  | pg1.Configuration = 0; | 
|  |  | 
|  | mptspi_write_spi_device_pg1(starget, &pg1); | 
|  | } | 
|  |  | 
|  | struct work_queue_wrapper { | 
|  | struct work_struct	work; | 
|  | struct _MPT_SCSI_HOST	*hd; | 
|  | int			disk; | 
|  | }; | 
|  |  | 
|  | static void mpt_work_wrapper(struct work_struct *work) | 
|  | { | 
|  | struct work_queue_wrapper *wqw = | 
|  | container_of(work, struct work_queue_wrapper, work); | 
|  | struct _MPT_SCSI_HOST *hd = wqw->hd; | 
|  | MPT_ADAPTER *ioc = hd->ioc; | 
|  | struct Scsi_Host *shost = ioc->sh; | 
|  | struct scsi_device *sdev; | 
|  | int disk = wqw->disk; | 
|  | struct _CONFIG_PAGE_IOC_3 *pg3; | 
|  |  | 
|  | kfree(wqw); | 
|  |  | 
|  | mpt_findImVolumes(ioc); | 
|  | pg3 = ioc->raid_data.pIocPg3; | 
|  | if (!pg3) | 
|  | return; | 
|  |  | 
|  | shost_for_each_device(sdev,shost) { | 
|  | struct scsi_target *starget = scsi_target(sdev); | 
|  | VirtTarget *vtarget = starget->hostdata; | 
|  |  | 
|  | /* only want to search RAID components */ | 
|  | if (sdev->channel != 1) | 
|  | continue; | 
|  |  | 
|  | /* The id is the raid PhysDiskNum, even if | 
|  | * starget->id is the actual target address */ | 
|  | if(vtarget->id != disk) | 
|  | continue; | 
|  |  | 
|  | starget_printk(KERN_INFO, vtarget->starget, MYIOC_s_FMT | 
|  | "Integrated RAID requests DV of new device\n", ioc->name); | 
|  | mptspi_dv_device(hd, sdev); | 
|  | } | 
|  | shost_printk(KERN_INFO, shost, MYIOC_s_FMT | 
|  | "Integrated RAID detects new device %d\n", ioc->name, disk); | 
|  | scsi_scan_target(&ioc->sh->shost_gendev, 1, disk, 0, 1); | 
|  | } | 
|  |  | 
|  |  | 
|  | static void mpt_dv_raid(struct _MPT_SCSI_HOST *hd, int disk) | 
|  | { | 
|  | struct work_queue_wrapper *wqw = kmalloc(sizeof(*wqw), GFP_ATOMIC); | 
|  | MPT_ADAPTER *ioc = hd->ioc; | 
|  |  | 
|  | if (!wqw) { | 
|  | shost_printk(KERN_ERR, ioc->sh, MYIOC_s_FMT | 
|  | "Failed to act on RAID event for physical disk %d\n", | 
|  | ioc->name, disk); | 
|  | return; | 
|  | } | 
|  | INIT_WORK(&wqw->work, mpt_work_wrapper); | 
|  | wqw->hd = hd; | 
|  | wqw->disk = disk; | 
|  |  | 
|  | schedule_work(&wqw->work); | 
|  | } | 
|  |  | 
|  | static int | 
|  | mptspi_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply) | 
|  | { | 
|  | u8 event = le32_to_cpu(pEvReply->Event) & 0xFF; | 
|  | struct _MPT_SCSI_HOST *hd = shost_priv(ioc->sh); | 
|  |  | 
|  | if (hd && event ==  MPI_EVENT_INTEGRATED_RAID) { | 
|  | int reason | 
|  | = (le32_to_cpu(pEvReply->Data[0]) & 0x00FF0000) >> 16; | 
|  |  | 
|  | if (reason == MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED) { | 
|  | int disk = (le32_to_cpu(pEvReply->Data[0]) & 0xFF000000) >> 24; | 
|  | mpt_dv_raid(hd, disk); | 
|  | } | 
|  | } | 
|  | return mptscsih_event_process(ioc, pEvReply); | 
|  | } | 
|  |  | 
|  | static int | 
|  | mptspi_deny_binding(struct scsi_target *starget) | 
|  | { | 
|  | struct _MPT_SCSI_HOST *hd = | 
|  | (struct _MPT_SCSI_HOST *)dev_to_shost(starget->dev.parent)->hostdata; | 
|  | return ((mptspi_is_raid(hd, starget->id)) && | 
|  | starget->channel == 0) ? 1 : 0; | 
|  | } | 
|  |  | 
|  | static struct spi_function_template mptspi_transport_functions = { | 
|  | .get_offset	= mptspi_read_parameters, | 
|  | .set_offset	= mptspi_write_offset, | 
|  | .show_offset	= 1, | 
|  | .get_period	= mptspi_read_parameters, | 
|  | .set_period	= mptspi_write_period, | 
|  | .show_period	= 1, | 
|  | .get_width	= mptspi_read_parameters, | 
|  | .set_width	= mptspi_write_width, | 
|  | .show_width	= 1, | 
|  | .get_iu		= mptspi_read_parameters, | 
|  | .set_iu		= mptspi_write_iu, | 
|  | .show_iu	= 1, | 
|  | .get_dt		= mptspi_read_parameters, | 
|  | .set_dt		= mptspi_write_dt, | 
|  | .show_dt	= 1, | 
|  | .get_qas	= mptspi_read_parameters, | 
|  | .set_qas	= mptspi_write_qas, | 
|  | .show_qas	= 1, | 
|  | .get_wr_flow	= mptspi_read_parameters, | 
|  | .set_wr_flow	= mptspi_write_wr_flow, | 
|  | .show_wr_flow	= 1, | 
|  | .get_rd_strm	= mptspi_read_parameters, | 
|  | .set_rd_strm	= mptspi_write_rd_strm, | 
|  | .show_rd_strm	= 1, | 
|  | .get_rti	= mptspi_read_parameters, | 
|  | .set_rti	= mptspi_write_rti, | 
|  | .show_rti	= 1, | 
|  | .get_pcomp_en	= mptspi_read_parameters, | 
|  | .set_pcomp_en	= mptspi_write_pcomp_en, | 
|  | .show_pcomp_en	= 1, | 
|  | .get_hold_mcs	= mptspi_read_parameters, | 
|  | .set_hold_mcs	= mptspi_write_hold_mcs, | 
|  | .show_hold_mcs	= 1, | 
|  | .deny_binding	= mptspi_deny_binding, | 
|  | }; | 
|  |  | 
|  | /**************************************************************************** | 
|  | * Supported hardware | 
|  | */ | 
|  |  | 
|  | static struct pci_device_id mptspi_pci_table[] = { | 
|  | { PCI_VENDOR_ID_LSI_LOGIC, MPI_MANUFACTPAGE_DEVID_53C1030, | 
|  | PCI_ANY_ID, PCI_ANY_ID }, | 
|  | { PCI_VENDOR_ID_ATTO, MPI_MANUFACTPAGE_DEVID_53C1030, | 
|  | PCI_ANY_ID, PCI_ANY_ID }, | 
|  | { PCI_VENDOR_ID_LSI_LOGIC, MPI_MANUFACTPAGE_DEVID_53C1035, | 
|  | PCI_ANY_ID, PCI_ANY_ID }, | 
|  | {0}	/* Terminating entry */ | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(pci, mptspi_pci_table); | 
|  |  | 
|  |  | 
|  | /* | 
|  | * renegotiate for a given target | 
|  | */ | 
|  | static void | 
|  | mptspi_dv_renegotiate_work(struct work_struct *work) | 
|  | { | 
|  | struct work_queue_wrapper *wqw = | 
|  | container_of(work, struct work_queue_wrapper, work); | 
|  | struct _MPT_SCSI_HOST *hd = wqw->hd; | 
|  | struct scsi_device *sdev; | 
|  | struct scsi_target *starget; | 
|  | struct _CONFIG_PAGE_SCSI_DEVICE_1 pg1; | 
|  | u32 nego; | 
|  | MPT_ADAPTER *ioc = hd->ioc; | 
|  |  | 
|  | kfree(wqw); | 
|  |  | 
|  | if (hd->spi_pending) { | 
|  | shost_for_each_device(sdev, ioc->sh) { | 
|  | if  (hd->spi_pending & (1 << sdev->id)) | 
|  | continue; | 
|  | starget = scsi_target(sdev); | 
|  | nego = mptspi_getRP(starget); | 
|  | pg1.RequestedParameters = cpu_to_le32(nego); | 
|  | pg1.Reserved = 0; | 
|  | pg1.Configuration = 0; | 
|  | mptspi_write_spi_device_pg1(starget, &pg1); | 
|  | } | 
|  | } else { | 
|  | shost_for_each_device(sdev, ioc->sh) | 
|  | mptspi_dv_device(hd, sdev); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void | 
|  | mptspi_dv_renegotiate(struct _MPT_SCSI_HOST *hd) | 
|  | { | 
|  | struct work_queue_wrapper *wqw = kmalloc(sizeof(*wqw), GFP_ATOMIC); | 
|  |  | 
|  | if (!wqw) | 
|  | return; | 
|  |  | 
|  | INIT_WORK(&wqw->work, mptspi_dv_renegotiate_work); | 
|  | wqw->hd = hd; | 
|  |  | 
|  | schedule_work(&wqw->work); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * spi module reset handler | 
|  | */ | 
|  | static int | 
|  | mptspi_ioc_reset(MPT_ADAPTER *ioc, int reset_phase) | 
|  | { | 
|  | int rc; | 
|  |  | 
|  | rc = mptscsih_ioc_reset(ioc, reset_phase); | 
|  |  | 
|  | /* only try to do a renegotiation if we're properly set up | 
|  | * if we get an ioc fault on bringup, ioc->sh will be NULL */ | 
|  | if (reset_phase == MPT_IOC_POST_RESET && | 
|  | ioc->sh) { | 
|  | struct _MPT_SCSI_HOST *hd = shost_priv(ioc->sh); | 
|  |  | 
|  | mptspi_dv_renegotiate(hd); | 
|  | } | 
|  |  | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_PM | 
|  | /* | 
|  | * spi module resume handler | 
|  | */ | 
|  | static int | 
|  | mptspi_resume(struct pci_dev *pdev) | 
|  | { | 
|  | MPT_ADAPTER 	*ioc = pci_get_drvdata(pdev); | 
|  | struct _MPT_SCSI_HOST *hd = shost_priv(ioc->sh); | 
|  | int rc; | 
|  |  | 
|  | rc = mptscsih_resume(pdev); | 
|  | mptspi_dv_renegotiate(hd); | 
|  |  | 
|  | return rc; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ | 
|  | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ | 
|  | /* | 
|  | *	mptspi_probe - Installs scsi devices per bus. | 
|  | *	@pdev: Pointer to pci_dev structure | 
|  | * | 
|  | *	Returns 0 for success, non-zero for failure. | 
|  | * | 
|  | */ | 
|  | static int | 
|  | mptspi_probe(struct pci_dev *pdev, const struct pci_device_id *id) | 
|  | { | 
|  | struct Scsi_Host	*sh; | 
|  | MPT_SCSI_HOST		*hd; | 
|  | MPT_ADAPTER 		*ioc; | 
|  | unsigned long		 flags; | 
|  | int			 ii; | 
|  | int			 numSGE = 0; | 
|  | int			 scale; | 
|  | int			 ioc_cap; | 
|  | int			error=0; | 
|  | int			r; | 
|  |  | 
|  | if ((r = mpt_attach(pdev,id)) != 0) | 
|  | return r; | 
|  |  | 
|  | ioc = pci_get_drvdata(pdev); | 
|  | ioc->DoneCtx = mptspiDoneCtx; | 
|  | ioc->TaskCtx = mptspiTaskCtx; | 
|  | ioc->InternalCtx = mptspiInternalCtx; | 
|  |  | 
|  | /*  Added sanity check on readiness of the MPT adapter. | 
|  | */ | 
|  | if (ioc->last_state != MPI_IOC_STATE_OPERATIONAL) { | 
|  | printk(MYIOC_s_WARN_FMT | 
|  | "Skipping because it's not operational!\n", | 
|  | ioc->name); | 
|  | error = -ENODEV; | 
|  | goto out_mptspi_probe; | 
|  | } | 
|  |  | 
|  | if (!ioc->active) { | 
|  | printk(MYIOC_s_WARN_FMT "Skipping because it's disabled!\n", | 
|  | ioc->name); | 
|  | error = -ENODEV; | 
|  | goto out_mptspi_probe; | 
|  | } | 
|  |  | 
|  | /*  Sanity check - ensure at least 1 port is INITIATOR capable | 
|  | */ | 
|  | ioc_cap = 0; | 
|  | for (ii=0; ii < ioc->facts.NumberOfPorts; ii++) { | 
|  | if (ioc->pfacts[ii].ProtocolFlags & | 
|  | MPI_PORTFACTS_PROTOCOL_INITIATOR) | 
|  | ioc_cap ++; | 
|  | } | 
|  |  | 
|  | if (!ioc_cap) { | 
|  | printk(MYIOC_s_WARN_FMT | 
|  | "Skipping ioc=%p because SCSI Initiator mode is NOT enabled!\n", | 
|  | ioc->name, ioc); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | sh = scsi_host_alloc(&mptspi_driver_template, sizeof(MPT_SCSI_HOST)); | 
|  |  | 
|  | if (!sh) { | 
|  | printk(MYIOC_s_WARN_FMT | 
|  | "Unable to register controller with SCSI subsystem\n", | 
|  | ioc->name); | 
|  | error = -1; | 
|  | goto out_mptspi_probe; | 
|  | } | 
|  |  | 
|  | spin_lock_irqsave(&ioc->FreeQlock, flags); | 
|  |  | 
|  | /* Attach the SCSI Host to the IOC structure | 
|  | */ | 
|  | ioc->sh = sh; | 
|  |  | 
|  | sh->io_port = 0; | 
|  | sh->n_io_port = 0; | 
|  | sh->irq = 0; | 
|  |  | 
|  | /* set 16 byte cdb's */ | 
|  | sh->max_cmd_len = 16; | 
|  |  | 
|  | /* Yikes!  This is important! | 
|  | * Otherwise, by default, linux | 
|  | * only scans target IDs 0-7! | 
|  | * pfactsN->MaxDevices unreliable | 
|  | * (not supported in early | 
|  | *	versions of the FW). | 
|  | * max_id = 1 + actual max id, | 
|  | * max_lun = 1 + actual last lun, | 
|  | *	see hosts.h :o( | 
|  | */ | 
|  | sh->max_id = ioc->devices_per_bus; | 
|  |  | 
|  | sh->max_lun = MPT_LAST_LUN + 1; | 
|  | /* | 
|  | * If RAID Firmware Detected, setup virtual channel | 
|  | */ | 
|  | if (ioc->ir_firmware) | 
|  | sh->max_channel = 1; | 
|  | else | 
|  | sh->max_channel = 0; | 
|  | sh->this_id = ioc->pfacts[0].PortSCSIID; | 
|  |  | 
|  | /* Required entry. | 
|  | */ | 
|  | sh->unique_id = ioc->id; | 
|  |  | 
|  | /* Verify that we won't exceed the maximum | 
|  | * number of chain buffers | 
|  | * We can optimize:  ZZ = req_sz/sizeof(SGE) | 
|  | * For 32bit SGE's: | 
|  | *  numSGE = 1 + (ZZ-1)*(maxChain -1) + ZZ | 
|  | *               + (req_sz - 64)/sizeof(SGE) | 
|  | * A slightly different algorithm is required for | 
|  | * 64bit SGEs. | 
|  | */ | 
|  | scale = ioc->req_sz/ioc->SGE_size; | 
|  | if (ioc->sg_addr_size == sizeof(u64)) { | 
|  | numSGE = (scale - 1) * | 
|  | (ioc->facts.MaxChainDepth-1) + scale + | 
|  | (ioc->req_sz - 60) / ioc->SGE_size; | 
|  | } else { | 
|  | numSGE = 1 + (scale - 1) * | 
|  | (ioc->facts.MaxChainDepth-1) + scale + | 
|  | (ioc->req_sz - 64) / ioc->SGE_size; | 
|  | } | 
|  |  | 
|  | if (numSGE < sh->sg_tablesize) { | 
|  | /* Reset this value */ | 
|  | dprintk(ioc, printk(MYIOC_s_DEBUG_FMT | 
|  | "Resetting sg_tablesize to %d from %d\n", | 
|  | ioc->name, numSGE, sh->sg_tablesize)); | 
|  | sh->sg_tablesize = numSGE; | 
|  | } | 
|  |  | 
|  | spin_unlock_irqrestore(&ioc->FreeQlock, flags); | 
|  |  | 
|  | hd = shost_priv(sh); | 
|  | hd->ioc = ioc; | 
|  |  | 
|  | /* SCSI needs scsi_cmnd lookup table! | 
|  | * (with size equal to req_depth*PtrSz!) | 
|  | */ | 
|  | ioc->ScsiLookup = kcalloc(ioc->req_depth, sizeof(void *), GFP_ATOMIC); | 
|  | if (!ioc->ScsiLookup) { | 
|  | error = -ENOMEM; | 
|  | goto out_mptspi_probe; | 
|  | } | 
|  | spin_lock_init(&ioc->scsi_lookup_lock); | 
|  |  | 
|  | dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ScsiLookup @ %p\n", | 
|  | ioc->name, ioc->ScsiLookup)); | 
|  |  | 
|  | ioc->spi_data.Saf_Te = mpt_saf_te; | 
|  | ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT | 
|  | "saf_te %x\n", | 
|  | ioc->name, | 
|  | mpt_saf_te)); | 
|  | ioc->spi_data.noQas = 0; | 
|  |  | 
|  | hd->last_queue_full = 0; | 
|  | hd->spi_pending = 0; | 
|  |  | 
|  | /* Some versions of the firmware don't support page 0; without | 
|  | * that we can't get the parameters */ | 
|  | if (ioc->spi_data.sdp0length != 0) | 
|  | sh->transportt = mptspi_transport_template; | 
|  |  | 
|  | error = scsi_add_host (sh, &ioc->pcidev->dev); | 
|  | if(error) { | 
|  | dprintk(ioc, printk(MYIOC_s_ERR_FMT | 
|  | "scsi_add_host failed\n", ioc->name)); | 
|  | goto out_mptspi_probe; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * issue internal bus reset | 
|  | */ | 
|  | if (ioc->spi_data.bus_reset) | 
|  | mptscsih_IssueTaskMgmt(hd, | 
|  | MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS, | 
|  | 0, 0, 0, 0, 5); | 
|  |  | 
|  | scsi_scan_host(sh); | 
|  | return 0; | 
|  |  | 
|  | out_mptspi_probe: | 
|  |  | 
|  | mptscsih_remove(pdev); | 
|  | return error; | 
|  | } | 
|  |  | 
|  | static struct pci_driver mptspi_driver = { | 
|  | .name		= "mptspi", | 
|  | .id_table	= mptspi_pci_table, | 
|  | .probe		= mptspi_probe, | 
|  | .remove		= __devexit_p(mptscsih_remove), | 
|  | .shutdown	= mptscsih_shutdown, | 
|  | #ifdef CONFIG_PM | 
|  | .suspend	= mptscsih_suspend, | 
|  | .resume		= mptspi_resume, | 
|  | #endif | 
|  | }; | 
|  |  | 
|  | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ | 
|  | /** | 
|  | *	mptspi_init - Register MPT adapter(s) as SCSI host(s) with SCSI mid-layer. | 
|  | * | 
|  | *	Returns 0 for success, non-zero for failure. | 
|  | */ | 
|  | static int __init | 
|  | mptspi_init(void) | 
|  | { | 
|  | int error; | 
|  |  | 
|  | show_mptmod_ver(my_NAME, my_VERSION); | 
|  |  | 
|  | mptspi_transport_template = spi_attach_transport(&mptspi_transport_functions); | 
|  | if (!mptspi_transport_template) | 
|  | return -ENODEV; | 
|  |  | 
|  | mptspiDoneCtx = mpt_register(mptscsih_io_done, MPTSPI_DRIVER); | 
|  | mptspiTaskCtx = mpt_register(mptscsih_taskmgmt_complete, MPTSPI_DRIVER); | 
|  | mptspiInternalCtx = mpt_register(mptscsih_scandv_complete, MPTSPI_DRIVER); | 
|  |  | 
|  | mpt_event_register(mptspiDoneCtx, mptspi_event_process); | 
|  | mpt_reset_register(mptspiDoneCtx, mptspi_ioc_reset); | 
|  |  | 
|  | error = pci_register_driver(&mptspi_driver); | 
|  | if (error) | 
|  | spi_release_transport(mptspi_transport_template); | 
|  |  | 
|  | return error; | 
|  | } | 
|  |  | 
|  | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ | 
|  | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ | 
|  | /** | 
|  | *	mptspi_exit - Unregisters MPT adapter(s) | 
|  | */ | 
|  | static void __exit | 
|  | mptspi_exit(void) | 
|  | { | 
|  | pci_unregister_driver(&mptspi_driver); | 
|  |  | 
|  | mpt_reset_deregister(mptspiDoneCtx); | 
|  | mpt_event_deregister(mptspiDoneCtx); | 
|  |  | 
|  | mpt_deregister(mptspiInternalCtx); | 
|  | mpt_deregister(mptspiTaskCtx); | 
|  | mpt_deregister(mptspiDoneCtx); | 
|  | spi_release_transport(mptspi_transport_template); | 
|  | } | 
|  |  | 
|  | module_init(mptspi_init); | 
|  | module_exit(mptspi_exit); |