|  | /* | 
|  | * linux/arch/arm/mach-omap1/board-sx1-mmc.c | 
|  | * | 
|  | * Copyright (C) 2007 Instituto Nokia de Tecnologia - INdT | 
|  | * Author: Carlos Eduardo Aguiar <carlos.aguiar@indt.org.br> | 
|  | * | 
|  | * This code is based on linux/arch/arm/mach-omap1/board-h2-mmc.c, which is: | 
|  | * Copyright (C) 2007 Instituto Nokia de Tecnologia - INdT | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License version 2 as | 
|  | * published by the Free Software Foundation. | 
|  | */ | 
|  |  | 
|  | #include <asm/arch/hardware.h> | 
|  | #include <asm/arch/mmc.h> | 
|  | #include <asm/arch/gpio.h> | 
|  |  | 
|  | #ifdef CONFIG_MMC_OMAP | 
|  | static int slot_cover_open; | 
|  | static struct device *mmc_device; | 
|  |  | 
|  | static int sx1_mmc_set_power(struct device *dev, int slot, int power_on, | 
|  | int vdd) | 
|  | { | 
|  | int err; | 
|  | u8 dat = 0; | 
|  |  | 
|  | #ifdef CONFIG_MMC_DEBUG | 
|  | dev_dbg(dev, "Set slot %d power: %s (vdd %d)\n", slot + 1, | 
|  | power_on ? "on" : "off", vdd); | 
|  | #endif | 
|  |  | 
|  | if (slot != 0) { | 
|  | dev_err(dev, "No such slot %d\n", slot + 1); | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | err = sx1_i2c_read_byte(SOFIA_I2C_ADDR, SOFIA_POWER1_REG, &dat); | 
|  | if (err < 0) | 
|  | return err; | 
|  |  | 
|  | if (power_on) | 
|  | dat |= SOFIA_MMC_POWER; | 
|  | else | 
|  | dat &= ~SOFIA_MMC_POWER; | 
|  |  | 
|  | return sx1_i2c_write_byte(SOFIA_I2C_ADDR, SOFIA_POWER1_REG, dat); | 
|  | } | 
|  |  | 
|  | static int sx1_mmc_set_bus_mode(struct device *dev, int slot, int bus_mode) | 
|  | { | 
|  | #ifdef CONFIG_MMC_DEBUG | 
|  | dev_dbg(dev, "Set slot %d bus_mode %s\n", slot + 1, | 
|  | bus_mode == MMC_BUSMODE_OPENDRAIN ? "open-drain" : "push-pull"); | 
|  | #endif | 
|  | if (slot != 0) { | 
|  | dev_err(dev, "No such slot %d\n", slot + 1); | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int sx1_mmc_get_cover_state(struct device *dev, int slot) | 
|  | { | 
|  | BUG_ON(slot != 0); | 
|  |  | 
|  | return slot_cover_open; | 
|  | } | 
|  |  | 
|  | void sx1_mmc_slot_cover_handler(void *arg, int state) | 
|  | { | 
|  | if (mmc_device == NULL) | 
|  | return; | 
|  |  | 
|  | slot_cover_open = state; | 
|  | omap_mmc_notify_cover_event(mmc_device, 0, state); | 
|  | } | 
|  |  | 
|  | static int sx1_mmc_late_init(struct device *dev) | 
|  | { | 
|  | int ret = 0; | 
|  |  | 
|  | mmc_device = dev; | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void sx1_mmc_cleanup(struct device *dev) | 
|  | { | 
|  | } | 
|  |  | 
|  | static struct omap_mmc_platform_data sx1_mmc_data = { | 
|  | .nr_slots                       = 1, | 
|  | .switch_slot                    = NULL, | 
|  | .init                           = sx1_mmc_late_init, | 
|  | .cleanup                        = sx1_mmc_cleanup, | 
|  | .slots[0]       = { | 
|  | .set_power              = sx1_mmc_set_power, | 
|  | .set_bus_mode           = sx1_mmc_set_bus_mode, | 
|  | .get_ro                 = NULL, | 
|  | .get_cover_state        = sx1_mmc_get_cover_state, | 
|  | .ocr_mask               = MMC_VDD_28_29 | MMC_VDD_30_31 | | 
|  | MMC_VDD_32_33 | MMC_VDD_33_34, | 
|  | .name                   = "mmcblk", | 
|  | }, | 
|  | }; | 
|  |  | 
|  | void __init sx1_mmc_init(void) | 
|  | { | 
|  | omap_set_mmc_info(1, &sx1_mmc_data); | 
|  | } | 
|  |  | 
|  | #else | 
|  |  | 
|  | void __init sx1_mmc_init(void) | 
|  | { | 
|  | } | 
|  |  | 
|  | void sx1_mmc_slot_cover_handler(void *arg, int state) | 
|  | { | 
|  | } | 
|  | #endif |