|  | /* | 
|  | * drivers/mtd/nand/at91_nand.c | 
|  | * | 
|  | *  Copyright (C) 2003 Rick Bronson | 
|  | * | 
|  | *  Derived from drivers/mtd/nand/autcpu12.c | 
|  | *	 Copyright (c) 2001 Thomas Gleixner (gleixner@autronix.de) | 
|  | * | 
|  | *  Derived from drivers/mtd/spia.c | 
|  | *	 Copyright (C) 2000 Steven J. Hill (sjhill@cotw.com) | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License version 2 as | 
|  | * published by the Free Software Foundation. | 
|  | * | 
|  | */ | 
|  |  | 
|  | #include <linux/slab.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/mtd/mtd.h> | 
|  | #include <linux/mtd/nand.h> | 
|  | #include <linux/mtd/partitions.h> | 
|  |  | 
|  | #include <asm/io.h> | 
|  | #include <asm/sizes.h> | 
|  |  | 
|  | #include <asm/hardware.h> | 
|  | #include <asm/arch/board.h> | 
|  | #include <asm/arch/gpio.h> | 
|  |  | 
|  | struct at91_nand_host { | 
|  | struct nand_chip	nand_chip; | 
|  | struct mtd_info		mtd; | 
|  | void __iomem		*io_base; | 
|  | struct at91_nand_data	*board; | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * Hardware specific access to control-lines | 
|  | */ | 
|  | static void at91_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl) | 
|  | { | 
|  | struct nand_chip *nand_chip = mtd->priv; | 
|  | struct at91_nand_host *host = nand_chip->priv; | 
|  |  | 
|  | if (cmd == NAND_CMD_NONE) | 
|  | return; | 
|  |  | 
|  | if (ctrl & NAND_CLE) | 
|  | writeb(cmd, host->io_base + (1 << host->board->cle)); | 
|  | else | 
|  | writeb(cmd, host->io_base + (1 << host->board->ale)); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Read the Device Ready pin. | 
|  | */ | 
|  | static int at91_nand_device_ready(struct mtd_info *mtd) | 
|  | { | 
|  | struct nand_chip *nand_chip = mtd->priv; | 
|  | struct at91_nand_host *host = nand_chip->priv; | 
|  |  | 
|  | return at91_get_gpio_value(host->board->rdy_pin); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Enable NAND. | 
|  | */ | 
|  | static void at91_nand_enable(struct at91_nand_host *host) | 
|  | { | 
|  | if (host->board->enable_pin) | 
|  | at91_set_gpio_value(host->board->enable_pin, 0); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Disable NAND. | 
|  | */ | 
|  | static void at91_nand_disable(struct at91_nand_host *host) | 
|  | { | 
|  | if (host->board->enable_pin) | 
|  | at91_set_gpio_value(host->board->enable_pin, 1); | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_MTD_PARTITIONS | 
|  | const char *part_probes[] = { "cmdlinepart", NULL }; | 
|  | #endif | 
|  |  | 
|  | /* | 
|  | * Probe for the NAND device. | 
|  | */ | 
|  | static int __init at91_nand_probe(struct platform_device *pdev) | 
|  | { | 
|  | struct at91_nand_host *host; | 
|  | struct mtd_info *mtd; | 
|  | struct nand_chip *nand_chip; | 
|  | int res; | 
|  |  | 
|  | #ifdef CONFIG_MTD_PARTITIONS | 
|  | struct mtd_partition *partitions = NULL; | 
|  | int num_partitions = 0; | 
|  | #endif | 
|  |  | 
|  | /* Allocate memory for the device structure (and zero it) */ | 
|  | host = kzalloc(sizeof(struct at91_nand_host), GFP_KERNEL); | 
|  | if (!host) { | 
|  | printk(KERN_ERR "at91_nand: failed to allocate device structure.\n"); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | host->io_base = ioremap(pdev->resource[0].start, | 
|  | pdev->resource[0].end - pdev->resource[0].start + 1); | 
|  | if (host->io_base == NULL) { | 
|  | printk(KERN_ERR "at91_nand: ioremap failed\n"); | 
|  | kfree(host); | 
|  | return -EIO; | 
|  | } | 
|  |  | 
|  | mtd = &host->mtd; | 
|  | nand_chip = &host->nand_chip; | 
|  | host->board = pdev->dev.platform_data; | 
|  |  | 
|  | nand_chip->priv = host;		/* link the private data structures */ | 
|  | mtd->priv = nand_chip; | 
|  | mtd->owner = THIS_MODULE; | 
|  |  | 
|  | /* Set address of NAND IO lines */ | 
|  | nand_chip->IO_ADDR_R = host->io_base; | 
|  | nand_chip->IO_ADDR_W = host->io_base; | 
|  | nand_chip->cmd_ctrl = at91_nand_cmd_ctrl; | 
|  |  | 
|  | if (host->board->rdy_pin) | 
|  | nand_chip->dev_ready = at91_nand_device_ready; | 
|  |  | 
|  | nand_chip->ecc.mode = NAND_ECC_SOFT;	/* enable ECC */ | 
|  | nand_chip->chip_delay = 20;		/* 20us command delay time */ | 
|  |  | 
|  | if (host->board->bus_width_16)		/* 16-bit bus width */ | 
|  | nand_chip->options |= NAND_BUSWIDTH_16; | 
|  |  | 
|  | platform_set_drvdata(pdev, host); | 
|  | at91_nand_enable(host); | 
|  |  | 
|  | if (host->board->det_pin) { | 
|  | if (at91_get_gpio_value(host->board->det_pin)) { | 
|  | printk ("No SmartMedia card inserted.\n"); | 
|  | res = ENXIO; | 
|  | goto out; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Scan to find existance of the device */ | 
|  | if (nand_scan(mtd, 1)) { | 
|  | res = -ENXIO; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_MTD_PARTITIONS | 
|  | #ifdef CONFIG_MTD_CMDLINE_PARTS | 
|  | mtd->name = "at91_nand"; | 
|  | num_partitions = parse_mtd_partitions(mtd, part_probes, | 
|  | &partitions, 0); | 
|  | #endif | 
|  | if (num_partitions <= 0 && host->board->partition_info) | 
|  | partitions = host->board->partition_info(mtd->size, | 
|  | &num_partitions); | 
|  |  | 
|  | if ((!partitions) || (num_partitions == 0)) { | 
|  | printk(KERN_ERR "at91_nand: No parititions defined, or unsupported device.\n"); | 
|  | res = ENXIO; | 
|  | goto release; | 
|  | } | 
|  |  | 
|  | res = add_mtd_partitions(mtd, partitions, num_partitions); | 
|  | #else | 
|  | res = add_mtd_device(mtd); | 
|  | #endif | 
|  |  | 
|  | if (!res) | 
|  | return res; | 
|  |  | 
|  | release: | 
|  | nand_release(mtd); | 
|  | out: | 
|  | at91_nand_disable(host); | 
|  | platform_set_drvdata(pdev, NULL); | 
|  | iounmap(host->io_base); | 
|  | kfree(host); | 
|  | return res; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Remove a NAND device. | 
|  | */ | 
|  | static int __devexit at91_nand_remove(struct platform_device *pdev) | 
|  | { | 
|  | struct at91_nand_host *host = platform_get_drvdata(pdev); | 
|  | struct mtd_info *mtd = &host->mtd; | 
|  |  | 
|  | nand_release(mtd); | 
|  |  | 
|  | at91_nand_disable(host); | 
|  |  | 
|  | iounmap(host->io_base); | 
|  | kfree(host); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static struct platform_driver at91_nand_driver = { | 
|  | .probe		= at91_nand_probe, | 
|  | .remove		= at91_nand_remove, | 
|  | .driver		= { | 
|  | .name	= "at91_nand", | 
|  | .owner	= THIS_MODULE, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static int __init at91_nand_init(void) | 
|  | { | 
|  | return platform_driver_register(&at91_nand_driver); | 
|  | } | 
|  |  | 
|  |  | 
|  | static void __exit at91_nand_exit(void) | 
|  | { | 
|  | platform_driver_unregister(&at91_nand_driver); | 
|  | } | 
|  |  | 
|  |  | 
|  | module_init(at91_nand_init); | 
|  | module_exit(at91_nand_exit); | 
|  |  | 
|  | MODULE_LICENSE("GPL"); | 
|  | MODULE_AUTHOR("Rick Bronson"); | 
|  | MODULE_DESCRIPTION("NAND/SmartMedia driver for AT91RM9200"); |