| /* | 
 |  *  linux/drivers/mmc/imxmmc.c - Motorola i.MX MMCI driver | 
 |  * | 
 |  *  Copyright (C) 2004 Sascha Hauer, Pengutronix <sascha@saschahauer.de> | 
 |  *  Copyright (C) 2006 Pavel Pisa, PiKRON <ppisa@pikron.com> | 
 |  * | 
 |  *  derived from pxamci.c by Russell King | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or modify | 
 |  * it under the terms of the GNU General Public License version 2 as | 
 |  * published by the Free Software Foundation. | 
 |  * | 
 |  *  2005-04-17 Pavel Pisa <pisa@cmp.felk.cvut.cz> | 
 |  *             Changed to conform redesigned i.MX scatter gather DMA interface | 
 |  * | 
 |  *  2005-11-04 Pavel Pisa <pisa@cmp.felk.cvut.cz> | 
 |  *             Updated for 2.6.14 kernel | 
 |  * | 
 |  *  2005-12-13 Jay Monkman <jtm@smoothsmoothie.com> | 
 |  *             Found and corrected problems in the write path | 
 |  * | 
 |  *  2005-12-30 Pavel Pisa <pisa@cmp.felk.cvut.cz> | 
 |  *             The event handling rewritten right way in softirq. | 
 |  *             Added many ugly hacks and delays to overcome SDHC | 
 |  *             deficiencies | 
 |  * | 
 |  */ | 
 |  | 
 | #ifdef CONFIG_MMC_DEBUG | 
 | #define DEBUG | 
 | #else | 
 | #undef  DEBUG | 
 | #endif | 
 |  | 
 | #include <linux/module.h> | 
 | #include <linux/init.h> | 
 | #include <linux/ioport.h> | 
 | #include <linux/platform_device.h> | 
 | #include <linux/interrupt.h> | 
 | #include <linux/blkdev.h> | 
 | #include <linux/dma-mapping.h> | 
 | #include <linux/mmc/host.h> | 
 | #include <linux/mmc/card.h> | 
 | #include <linux/mmc/protocol.h> | 
 | #include <linux/delay.h> | 
 |  | 
 | #include <asm/dma.h> | 
 | #include <asm/io.h> | 
 | #include <asm/irq.h> | 
 | #include <asm/sizes.h> | 
 | #include <asm/arch/mmc.h> | 
 | #include <asm/arch/imx-dma.h> | 
 |  | 
 | #include "imxmmc.h" | 
 |  | 
 | #define DRIVER_NAME "imx-mmc" | 
 |  | 
 | #define IMXMCI_INT_MASK_DEFAULT (INT_MASK_BUF_READY | INT_MASK_DATA_TRAN | \ | 
 | 	              INT_MASK_WRITE_OP_DONE | INT_MASK_END_CMD_RES | \ | 
 | 		      INT_MASK_AUTO_CARD_DETECT | INT_MASK_DAT0_EN | INT_MASK_SDIO) | 
 |  | 
 | struct imxmci_host { | 
 | 	struct mmc_host		*mmc; | 
 | 	spinlock_t		lock; | 
 | 	struct resource		*res; | 
 | 	int			irq; | 
 | 	imx_dmach_t		dma; | 
 | 	unsigned int		clkrt; | 
 | 	unsigned int		cmdat; | 
 | 	volatile unsigned int	imask; | 
 | 	unsigned int		power_mode; | 
 | 	unsigned int		present; | 
 | 	struct imxmmc_platform_data *pdata; | 
 |  | 
 | 	struct mmc_request	*req; | 
 | 	struct mmc_command	*cmd; | 
 | 	struct mmc_data		*data; | 
 |  | 
 | 	struct timer_list	timer; | 
 | 	struct tasklet_struct	tasklet; | 
 | 	unsigned int		status_reg; | 
 | 	unsigned long		pending_events; | 
 | 	/* Next to fields are there for CPU driven transfers to overcome SDHC deficiencies */ | 
 | 	u16			*data_ptr; | 
 | 	unsigned int		data_cnt; | 
 | 	atomic_t		stuck_timeout; | 
 |  | 
 | 	unsigned int		dma_nents; | 
 | 	unsigned int		dma_size; | 
 | 	unsigned int		dma_dir; | 
 | 	int			dma_allocated; | 
 |  | 
 | 	unsigned char		actual_bus_width; | 
 |  | 
 | 	int			prev_cmd_code; | 
 | }; | 
 |  | 
 | #define IMXMCI_PEND_IRQ_b	0 | 
 | #define IMXMCI_PEND_DMA_END_b	1 | 
 | #define IMXMCI_PEND_DMA_ERR_b	2 | 
 | #define IMXMCI_PEND_WAIT_RESP_b	3 | 
 | #define IMXMCI_PEND_DMA_DATA_b	4 | 
 | #define IMXMCI_PEND_CPU_DATA_b	5 | 
 | #define IMXMCI_PEND_CARD_XCHG_b	6 | 
 | #define IMXMCI_PEND_SET_INIT_b	7 | 
 | #define IMXMCI_PEND_STARTED_b	8 | 
 |  | 
 | #define IMXMCI_PEND_IRQ_m	(1 << IMXMCI_PEND_IRQ_b) | 
 | #define IMXMCI_PEND_DMA_END_m	(1 << IMXMCI_PEND_DMA_END_b) | 
 | #define IMXMCI_PEND_DMA_ERR_m	(1 << IMXMCI_PEND_DMA_ERR_b) | 
 | #define IMXMCI_PEND_WAIT_RESP_m	(1 << IMXMCI_PEND_WAIT_RESP_b) | 
 | #define IMXMCI_PEND_DMA_DATA_m	(1 << IMXMCI_PEND_DMA_DATA_b) | 
 | #define IMXMCI_PEND_CPU_DATA_m	(1 << IMXMCI_PEND_CPU_DATA_b) | 
 | #define IMXMCI_PEND_CARD_XCHG_m	(1 << IMXMCI_PEND_CARD_XCHG_b) | 
 | #define IMXMCI_PEND_SET_INIT_m	(1 << IMXMCI_PEND_SET_INIT_b) | 
 | #define IMXMCI_PEND_STARTED_m	(1 << IMXMCI_PEND_STARTED_b) | 
 |  | 
 | static void imxmci_stop_clock(struct imxmci_host *host) | 
 | { | 
 | 	int i = 0; | 
 | 	MMC_STR_STP_CLK &= ~STR_STP_CLK_START_CLK; | 
 | 	while(i < 0x1000) { | 
 | 	        if(!(i & 0x7f)) | 
 | 			MMC_STR_STP_CLK |= STR_STP_CLK_STOP_CLK; | 
 |  | 
 | 		if(!(MMC_STATUS & STATUS_CARD_BUS_CLK_RUN)) { | 
 | 			/* Check twice before cut */ | 
 | 			if(!(MMC_STATUS & STATUS_CARD_BUS_CLK_RUN)) | 
 | 				return; | 
 | 		} | 
 |  | 
 | 		i++; | 
 | 	} | 
 | 	dev_dbg(mmc_dev(host->mmc), "imxmci_stop_clock blocked, no luck\n"); | 
 | } | 
 |  | 
 | static int imxmci_start_clock(struct imxmci_host *host) | 
 | { | 
 | 	unsigned int trials = 0; | 
 | 	unsigned int delay_limit = 128; | 
 | 	unsigned long flags; | 
 |  | 
 | 	MMC_STR_STP_CLK &= ~STR_STP_CLK_STOP_CLK; | 
 |  | 
 | 	clear_bit(IMXMCI_PEND_STARTED_b, &host->pending_events); | 
 |  | 
 | 	/* | 
 | 	 * Command start of the clock, this usually succeeds in less | 
 | 	 * then 6 delay loops, but during card detection (low clockrate) | 
 | 	 * it takes up to 5000 delay loops and sometimes fails for the first time | 
 | 	 */ | 
 | 	MMC_STR_STP_CLK |= STR_STP_CLK_START_CLK; | 
 |  | 
 | 	do { | 
 | 		unsigned int delay = delay_limit; | 
 |  | 
 | 		while(delay--){ | 
 | 			if(MMC_STATUS & STATUS_CARD_BUS_CLK_RUN) | 
 | 				/* Check twice before cut */ | 
 | 				if(MMC_STATUS & STATUS_CARD_BUS_CLK_RUN) | 
 | 					return 0; | 
 |  | 
 | 			if(test_bit(IMXMCI_PEND_STARTED_b, &host->pending_events)) | 
 | 				return 0; | 
 | 		} | 
 |  | 
 | 		local_irq_save(flags); | 
 | 		/* | 
 | 		 * Ensure, that request is not doubled under all possible circumstances. | 
 | 		 * It is possible, that cock running state is missed, because some other | 
 | 		 * IRQ or schedule delays this function execution and the clocks has | 
 | 		 * been already stopped by other means (response processing, SDHC HW) | 
 | 		 */ | 
 | 		if(!test_bit(IMXMCI_PEND_STARTED_b, &host->pending_events)) | 
 | 			MMC_STR_STP_CLK |= STR_STP_CLK_START_CLK; | 
 | 		local_irq_restore(flags); | 
 |  | 
 | 	} while(++trials<256); | 
 |  | 
 | 	dev_err(mmc_dev(host->mmc), "imxmci_start_clock blocked, no luck\n"); | 
 |  | 
 | 	return -1; | 
 | } | 
 |  | 
 | static void imxmci_softreset(void) | 
 | { | 
 | 	/* reset sequence */ | 
 | 	MMC_STR_STP_CLK = 0x8; | 
 | 	MMC_STR_STP_CLK = 0xD; | 
 | 	MMC_STR_STP_CLK = 0x5; | 
 | 	MMC_STR_STP_CLK = 0x5; | 
 | 	MMC_STR_STP_CLK = 0x5; | 
 | 	MMC_STR_STP_CLK = 0x5; | 
 | 	MMC_STR_STP_CLK = 0x5; | 
 | 	MMC_STR_STP_CLK = 0x5; | 
 | 	MMC_STR_STP_CLK = 0x5; | 
 | 	MMC_STR_STP_CLK = 0x5; | 
 |  | 
 | 	MMC_RES_TO = 0xff; | 
 | 	MMC_BLK_LEN = 512; | 
 | 	MMC_NOB = 1; | 
 | } | 
 |  | 
 | static int imxmci_busy_wait_for_status(struct imxmci_host *host, | 
 | 			unsigned int *pstat, unsigned int stat_mask, | 
 | 			int timeout, const char *where) | 
 | { | 
 | 	int loops=0; | 
 | 	while(!(*pstat & stat_mask)) { | 
 | 		loops+=2; | 
 | 		if(loops >= timeout) { | 
 | 			dev_dbg(mmc_dev(host->mmc), "busy wait timeout in %s, STATUS = 0x%x (0x%x)\n", | 
 | 				where, *pstat, stat_mask); | 
 | 			return -1; | 
 | 		} | 
 | 		udelay(2); | 
 | 		*pstat |= MMC_STATUS; | 
 | 	} | 
 | 	if(!loops) | 
 | 		return 0; | 
 |  | 
 | 	/* The busy-wait is expected there for clock <8MHz due to SDHC hardware flaws */ | 
 | 	if(!(stat_mask & STATUS_END_CMD_RESP) || (host->mmc->ios.clock>=8000000)) | 
 | 		dev_info(mmc_dev(host->mmc), "busy wait for %d usec in %s, STATUS = 0x%x (0x%x)\n", | 
 | 			loops, where, *pstat, stat_mask); | 
 | 	return loops; | 
 | } | 
 |  | 
 | static void imxmci_setup_data(struct imxmci_host *host, struct mmc_data *data) | 
 | { | 
 | 	unsigned int nob = data->blocks; | 
 | 	unsigned int blksz = data->blksz; | 
 | 	unsigned int datasz = nob * blksz; | 
 | 	int i; | 
 |  | 
 | 	if (data->flags & MMC_DATA_STREAM) | 
 | 		nob = 0xffff; | 
 |  | 
 | 	host->data = data; | 
 | 	data->bytes_xfered = 0; | 
 |  | 
 | 	MMC_NOB = nob; | 
 | 	MMC_BLK_LEN = blksz; | 
 |  | 
 | 	/* | 
 | 	 * DMA cannot be used for small block sizes, we have to use CPU driven transfers otherwise. | 
 | 	 * We are in big troubles for non-512 byte transfers according to note in the paragraph | 
 | 	 * 20.6.7 of User Manual anyway, but we need to be able to transfer SCR at least. | 
 | 	 * The situation is even more complex in reality. The SDHC in not able to handle wll | 
 | 	 * partial FIFO fills and reads. The length has to be rounded up to burst size multiple. | 
 | 	 * This is required for SCR read at least. | 
 | 	 */ | 
 | 	if (datasz < 512) { | 
 | 		host->dma_size = datasz; | 
 | 		if (data->flags & MMC_DATA_READ) { | 
 | 			host->dma_dir = DMA_FROM_DEVICE; | 
 |  | 
 | 			/* Hack to enable read SCR */ | 
 | 			MMC_NOB = 1; | 
 | 			MMC_BLK_LEN = 512; | 
 | 		} else { | 
 | 			host->dma_dir = DMA_TO_DEVICE; | 
 | 		} | 
 |  | 
 | 		/* Convert back to virtual address */ | 
 | 		host->data_ptr = (u16*)(page_address(data->sg->page) + data->sg->offset); | 
 | 		host->data_cnt = 0; | 
 |  | 
 | 		clear_bit(IMXMCI_PEND_DMA_DATA_b, &host->pending_events); | 
 | 		set_bit(IMXMCI_PEND_CPU_DATA_b, &host->pending_events); | 
 |  | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	if (data->flags & MMC_DATA_READ) { | 
 | 		host->dma_dir = DMA_FROM_DEVICE; | 
 | 		host->dma_nents = dma_map_sg(mmc_dev(host->mmc), data->sg, | 
 | 						data->sg_len,  host->dma_dir); | 
 |  | 
 | 		imx_dma_setup_sg(host->dma, data->sg, data->sg_len, datasz, | 
 | 			host->res->start + MMC_BUFFER_ACCESS_OFS, DMA_MODE_READ); | 
 |  | 
 | 		/*imx_dma_setup_mem2dev_ccr(host->dma, DMA_MODE_READ, IMX_DMA_WIDTH_16, CCR_REN);*/ | 
 | 		CCR(host->dma) = CCR_DMOD_LINEAR | CCR_DSIZ_32 | CCR_SMOD_FIFO | CCR_SSIZ_16 | CCR_REN; | 
 | 	} else { | 
 | 		host->dma_dir = DMA_TO_DEVICE; | 
 |  | 
 | 		host->dma_nents = dma_map_sg(mmc_dev(host->mmc), data->sg, | 
 | 						data->sg_len,  host->dma_dir); | 
 |  | 
 | 		imx_dma_setup_sg(host->dma, data->sg, data->sg_len, datasz, | 
 | 			host->res->start + MMC_BUFFER_ACCESS_OFS, DMA_MODE_WRITE); | 
 |  | 
 | 		/*imx_dma_setup_mem2dev_ccr(host->dma, DMA_MODE_WRITE, IMX_DMA_WIDTH_16, CCR_REN);*/ | 
 | 		CCR(host->dma) = CCR_SMOD_LINEAR | CCR_SSIZ_32 | CCR_DMOD_FIFO | CCR_DSIZ_16 | CCR_REN; | 
 | 	} | 
 |  | 
 | #if 1	/* This code is there only for consistency checking and can be disabled in future */ | 
 | 	host->dma_size = 0; | 
 | 	for(i=0; i<host->dma_nents; i++) | 
 | 		host->dma_size+=data->sg[i].length; | 
 |  | 
 | 	if (datasz > host->dma_size) { | 
 | 		dev_err(mmc_dev(host->mmc), "imxmci_setup_data datasz 0x%x > 0x%x dm_size\n", | 
 | 		       datasz, host->dma_size); | 
 | 	} | 
 | #endif | 
 |  | 
 | 	host->dma_size = datasz; | 
 |  | 
 | 	wmb(); | 
 |  | 
 | 	if(host->actual_bus_width == MMC_BUS_WIDTH_4) | 
 | 		BLR(host->dma) = 0;	/* burst 64 byte read / 64 bytes write */ | 
 | 	else | 
 | 		BLR(host->dma) = 16;	/* burst 16 byte read / 16 bytes write */ | 
 |  | 
 | 	RSSR(host->dma) = DMA_REQ_SDHC; | 
 |  | 
 | 	set_bit(IMXMCI_PEND_DMA_DATA_b, &host->pending_events); | 
 | 	clear_bit(IMXMCI_PEND_CPU_DATA_b, &host->pending_events); | 
 |  | 
 | 	/* start DMA engine for read, write is delayed after initial response */ | 
 | 	if (host->dma_dir == DMA_FROM_DEVICE) { | 
 | 		imx_dma_enable(host->dma); | 
 | 	} | 
 | } | 
 |  | 
 | static void imxmci_start_cmd(struct imxmci_host *host, struct mmc_command *cmd, unsigned int cmdat) | 
 | { | 
 | 	unsigned long flags; | 
 | 	u32 imask; | 
 |  | 
 | 	WARN_ON(host->cmd != NULL); | 
 | 	host->cmd = cmd; | 
 |  | 
 | 	/* Ensure, that clock are stopped else command programming and start fails */ | 
 | 	imxmci_stop_clock(host); | 
 |  | 
 | 	if (cmd->flags & MMC_RSP_BUSY) | 
 | 		cmdat |= CMD_DAT_CONT_BUSY; | 
 |  | 
 | 	switch (mmc_resp_type(cmd)) { | 
 | 	case MMC_RSP_R1: /* short CRC, OPCODE */ | 
 | 	case MMC_RSP_R1B:/* short CRC, OPCODE, BUSY */ | 
 | 		cmdat |= CMD_DAT_CONT_RESPONSE_FORMAT_R1; | 
 | 		break; | 
 | 	case MMC_RSP_R2: /* long 136 bit + CRC */ | 
 | 		cmdat |= CMD_DAT_CONT_RESPONSE_FORMAT_R2; | 
 | 		break; | 
 | 	case MMC_RSP_R3: /* short */ | 
 | 		cmdat |= CMD_DAT_CONT_RESPONSE_FORMAT_R3; | 
 | 		break; | 
 | 	default: | 
 | 		break; | 
 | 	} | 
 |  | 
 | 	if ( test_and_clear_bit(IMXMCI_PEND_SET_INIT_b, &host->pending_events) ) | 
 | 		cmdat |= CMD_DAT_CONT_INIT; /* This command needs init */ | 
 |  | 
 | 	if ( host->actual_bus_width == MMC_BUS_WIDTH_4 ) | 
 | 		cmdat |= CMD_DAT_CONT_BUS_WIDTH_4; | 
 |  | 
 | 	MMC_CMD = cmd->opcode; | 
 | 	MMC_ARGH = cmd->arg >> 16; | 
 | 	MMC_ARGL = cmd->arg & 0xffff; | 
 | 	MMC_CMD_DAT_CONT = cmdat; | 
 |  | 
 | 	atomic_set(&host->stuck_timeout, 0); | 
 | 	set_bit(IMXMCI_PEND_WAIT_RESP_b, &host->pending_events); | 
 |  | 
 |  | 
 | 	imask = IMXMCI_INT_MASK_DEFAULT; | 
 | 	imask &= ~INT_MASK_END_CMD_RES; | 
 | 	if ( cmdat & CMD_DAT_CONT_DATA_ENABLE ) { | 
 | 		/*imask &= ~INT_MASK_BUF_READY;*/ | 
 | 		imask &= ~INT_MASK_DATA_TRAN; | 
 | 		if ( cmdat & CMD_DAT_CONT_WRITE ) | 
 | 			imask &= ~INT_MASK_WRITE_OP_DONE; | 
 | 		if(test_bit(IMXMCI_PEND_CPU_DATA_b, &host->pending_events)) | 
 | 			imask &= ~INT_MASK_BUF_READY; | 
 | 	} | 
 |  | 
 | 	spin_lock_irqsave(&host->lock, flags); | 
 | 	host->imask = imask; | 
 | 	MMC_INT_MASK = host->imask; | 
 | 	spin_unlock_irqrestore(&host->lock, flags); | 
 |  | 
 | 	dev_dbg(mmc_dev(host->mmc), "CMD%02d (0x%02x) mask set to 0x%04x\n", | 
 | 		cmd->opcode, cmd->opcode, imask); | 
 |  | 
 | 	imxmci_start_clock(host); | 
 | } | 
 |  | 
 | static void imxmci_finish_request(struct imxmci_host *host, struct mmc_request *req) | 
 | { | 
 | 	unsigned long flags; | 
 |  | 
 | 	spin_lock_irqsave(&host->lock, flags); | 
 |  | 
 | 	host->pending_events &= ~(IMXMCI_PEND_WAIT_RESP_m | IMXMCI_PEND_DMA_END_m | | 
 | 			IMXMCI_PEND_DMA_DATA_m | IMXMCI_PEND_CPU_DATA_m); | 
 |  | 
 | 	host->imask = IMXMCI_INT_MASK_DEFAULT; | 
 | 	MMC_INT_MASK = host->imask; | 
 |  | 
 | 	spin_unlock_irqrestore(&host->lock, flags); | 
 |  | 
 | 	if(req && req->cmd) | 
 | 		host->prev_cmd_code = req->cmd->opcode; | 
 |  | 
 | 	host->req = NULL; | 
 | 	host->cmd = NULL; | 
 | 	host->data = NULL; | 
 | 	mmc_request_done(host->mmc, req); | 
 | } | 
 |  | 
 | static int imxmci_finish_data(struct imxmci_host *host, unsigned int stat) | 
 | { | 
 | 	struct mmc_data *data = host->data; | 
 | 	int data_error; | 
 |  | 
 | 	if(test_and_clear_bit(IMXMCI_PEND_DMA_DATA_b, &host->pending_events)){ | 
 | 		imx_dma_disable(host->dma); | 
 | 		dma_unmap_sg(mmc_dev(host->mmc), data->sg, host->dma_nents, | 
 | 			     host->dma_dir); | 
 | 	} | 
 |  | 
 | 	if ( stat & STATUS_ERR_MASK ) { | 
 | 		dev_dbg(mmc_dev(host->mmc), "request failed. status: 0x%08x\n",stat); | 
 | 		if(stat & (STATUS_CRC_READ_ERR | STATUS_CRC_WRITE_ERR)) | 
 | 			data->error = MMC_ERR_BADCRC; | 
 | 		else if(stat & STATUS_TIME_OUT_READ) | 
 | 			data->error = MMC_ERR_TIMEOUT; | 
 | 		else | 
 | 			data->error = MMC_ERR_FAILED; | 
 | 	} else { | 
 | 		data->bytes_xfered = host->dma_size; | 
 | 	} | 
 |  | 
 | 	data_error = data->error; | 
 |  | 
 | 	host->data = NULL; | 
 |  | 
 | 	return data_error; | 
 | } | 
 |  | 
 | static int imxmci_cmd_done(struct imxmci_host *host, unsigned int stat) | 
 | { | 
 | 	struct mmc_command *cmd = host->cmd; | 
 | 	int i; | 
 | 	u32 a,b,c; | 
 | 	struct mmc_data *data = host->data; | 
 |  | 
 | 	if (!cmd) | 
 | 		return 0; | 
 |  | 
 | 	host->cmd = NULL; | 
 |  | 
 | 	if (stat & STATUS_TIME_OUT_RESP) { | 
 | 		dev_dbg(mmc_dev(host->mmc), "CMD TIMEOUT\n"); | 
 | 		cmd->error = MMC_ERR_TIMEOUT; | 
 | 	} else if (stat & STATUS_RESP_CRC_ERR && cmd->flags & MMC_RSP_CRC) { | 
 | 		dev_dbg(mmc_dev(host->mmc), "cmd crc error\n"); | 
 | 		cmd->error = MMC_ERR_BADCRC; | 
 | 	} | 
 |  | 
 | 	if(cmd->flags & MMC_RSP_PRESENT) { | 
 | 		if(cmd->flags & MMC_RSP_136) { | 
 | 			for (i = 0; i < 4; i++) { | 
 | 				u32 a = MMC_RES_FIFO & 0xffff; | 
 | 				u32 b = MMC_RES_FIFO & 0xffff; | 
 | 				cmd->resp[i] = a<<16 | b; | 
 | 			} | 
 | 		} else { | 
 | 			a = MMC_RES_FIFO & 0xffff; | 
 | 			b = MMC_RES_FIFO & 0xffff; | 
 | 			c = MMC_RES_FIFO & 0xffff; | 
 | 			cmd->resp[0] = a<<24 | b<<8 | c>>8; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	dev_dbg(mmc_dev(host->mmc), "RESP 0x%08x, 0x%08x, 0x%08x, 0x%08x, error %d\n", | 
 | 		cmd->resp[0], cmd->resp[1], cmd->resp[2], cmd->resp[3], cmd->error); | 
 |  | 
 | 	if (data && (cmd->error == MMC_ERR_NONE) && !(stat & STATUS_ERR_MASK)) { | 
 | 		if (host->req->data->flags & MMC_DATA_WRITE) { | 
 |  | 
 | 			/* Wait for FIFO to be empty before starting DMA write */ | 
 |  | 
 | 			stat = MMC_STATUS; | 
 | 			if(imxmci_busy_wait_for_status(host, &stat, | 
 | 				STATUS_APPL_BUFF_FE, | 
 | 				40, "imxmci_cmd_done DMA WR") < 0) { | 
 | 				cmd->error = MMC_ERR_FIFO; | 
 | 				imxmci_finish_data(host, stat); | 
 | 				if(host->req) | 
 | 					imxmci_finish_request(host, host->req); | 
 | 				dev_warn(mmc_dev(host->mmc), "STATUS = 0x%04x\n", | 
 | 				       stat); | 
 | 				return 0; | 
 | 			} | 
 |  | 
 | 			if(test_bit(IMXMCI_PEND_DMA_DATA_b, &host->pending_events)) { | 
 | 				imx_dma_enable(host->dma); | 
 | 			} | 
 | 		} | 
 | 	} else { | 
 | 		struct mmc_request *req; | 
 | 		imxmci_stop_clock(host); | 
 | 		req = host->req; | 
 |  | 
 | 		if(data) | 
 | 			imxmci_finish_data(host, stat); | 
 |  | 
 | 		if( req ) { | 
 | 			imxmci_finish_request(host, req); | 
 | 		} else { | 
 | 			dev_warn(mmc_dev(host->mmc), "imxmci_cmd_done: no request to finish\n"); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	return 1; | 
 | } | 
 |  | 
 | static int imxmci_data_done(struct imxmci_host *host, unsigned int stat) | 
 | { | 
 | 	struct mmc_data *data = host->data; | 
 | 	int data_error; | 
 |  | 
 | 	if (!data) | 
 | 		return 0; | 
 |  | 
 | 	data_error = imxmci_finish_data(host, stat); | 
 |  | 
 | 	if (host->req->stop) { | 
 | 		imxmci_stop_clock(host); | 
 | 		imxmci_start_cmd(host, host->req->stop, 0); | 
 | 	} else { | 
 | 		struct mmc_request *req; | 
 | 		req = host->req; | 
 | 		if( req ) { | 
 | 			imxmci_finish_request(host, req); | 
 | 		} else { | 
 | 			dev_warn(mmc_dev(host->mmc), "imxmci_data_done: no request to finish\n"); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	return 1; | 
 | } | 
 |  | 
 | static int imxmci_cpu_driven_data(struct imxmci_host *host, unsigned int *pstat) | 
 | { | 
 | 	int i; | 
 | 	int burst_len; | 
 | 	int trans_done = 0; | 
 | 	unsigned int stat = *pstat; | 
 |  | 
 | 	if(host->actual_bus_width != MMC_BUS_WIDTH_4) | 
 | 		burst_len = 16; | 
 | 	else | 
 | 		burst_len = 64; | 
 |  | 
 | 	/* This is unfortunately required */ | 
 | 	dev_dbg(mmc_dev(host->mmc), "imxmci_cpu_driven_data running STATUS = 0x%x\n", | 
 | 		stat); | 
 |  | 
 | 	udelay(20);	/* required for clocks < 8MHz*/ | 
 |  | 
 | 	if(host->dma_dir == DMA_FROM_DEVICE) { | 
 | 		imxmci_busy_wait_for_status(host, &stat, | 
 | 				STATUS_APPL_BUFF_FF | STATUS_DATA_TRANS_DONE, | 
 | 				50, "imxmci_cpu_driven_data read"); | 
 |  | 
 | 		while((stat & (STATUS_APPL_BUFF_FF |  STATUS_DATA_TRANS_DONE)) && | 
 | 		      (host->data_cnt < 512)) { | 
 |  | 
 | 			udelay(20);	/* required for clocks < 8MHz*/ | 
 |  | 
 | 			for(i = burst_len; i>=2 ; i-=2) { | 
 | 				u16 data; | 
 | 				data = MMC_BUFFER_ACCESS; | 
 | 				udelay(10);	/* required for clocks < 8MHz*/ | 
 | 				if(host->data_cnt+2 <= host->dma_size) { | 
 | 					*(host->data_ptr++) = data; | 
 | 				} else { | 
 | 					if(host->data_cnt < host->dma_size) | 
 | 						*(u8*)(host->data_ptr) = data; | 
 | 				} | 
 | 				host->data_cnt += 2; | 
 | 			} | 
 |  | 
 | 			stat = MMC_STATUS; | 
 |  | 
 | 			dev_dbg(mmc_dev(host->mmc), "imxmci_cpu_driven_data read %d burst %d STATUS = 0x%x\n", | 
 | 				host->data_cnt, burst_len, stat); | 
 | 		} | 
 |  | 
 | 		if((stat & STATUS_DATA_TRANS_DONE) && (host->data_cnt >= 512)) | 
 | 			trans_done = 1; | 
 |  | 
 | 		if(host->dma_size & 0x1ff) | 
 | 			stat &= ~STATUS_CRC_READ_ERR; | 
 |  | 
 | 	} else { | 
 | 		imxmci_busy_wait_for_status(host, &stat, | 
 | 				STATUS_APPL_BUFF_FE, | 
 | 				20, "imxmci_cpu_driven_data write"); | 
 |  | 
 | 		while((stat & STATUS_APPL_BUFF_FE) && | 
 | 		      (host->data_cnt < host->dma_size)) { | 
 | 			if(burst_len >= host->dma_size - host->data_cnt) { | 
 | 				burst_len = host->dma_size - host->data_cnt; | 
 | 				host->data_cnt = host->dma_size; | 
 | 				trans_done = 1; | 
 | 			} else { | 
 | 				host->data_cnt += burst_len; | 
 | 			} | 
 |  | 
 | 			for(i = burst_len; i>0 ; i-=2) | 
 | 				MMC_BUFFER_ACCESS = *(host->data_ptr++); | 
 |  | 
 | 			stat = MMC_STATUS; | 
 |  | 
 | 			dev_dbg(mmc_dev(host->mmc), "imxmci_cpu_driven_data write burst %d STATUS = 0x%x\n", | 
 | 				burst_len, stat); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	*pstat = stat; | 
 |  | 
 | 	return trans_done; | 
 | } | 
 |  | 
 | static void imxmci_dma_irq(int dma, void *devid) | 
 | { | 
 | 	struct imxmci_host *host = devid; | 
 | 	uint32_t stat = MMC_STATUS; | 
 |  | 
 | 	atomic_set(&host->stuck_timeout, 0); | 
 | 	host->status_reg = stat; | 
 | 	set_bit(IMXMCI_PEND_DMA_END_b, &host->pending_events); | 
 | 	tasklet_schedule(&host->tasklet); | 
 | } | 
 |  | 
 | static irqreturn_t imxmci_irq(int irq, void *devid) | 
 | { | 
 | 	struct imxmci_host *host = devid; | 
 | 	uint32_t stat = MMC_STATUS; | 
 | 	int handled = 1; | 
 |  | 
 | 	MMC_INT_MASK = host->imask | INT_MASK_SDIO | INT_MASK_AUTO_CARD_DETECT; | 
 |  | 
 | 	atomic_set(&host->stuck_timeout, 0); | 
 | 	host->status_reg = stat; | 
 | 	set_bit(IMXMCI_PEND_IRQ_b, &host->pending_events); | 
 | 	set_bit(IMXMCI_PEND_STARTED_b, &host->pending_events); | 
 | 	tasklet_schedule(&host->tasklet); | 
 |  | 
 | 	return IRQ_RETVAL(handled);; | 
 | } | 
 |  | 
 | static void imxmci_tasklet_fnc(unsigned long data) | 
 | { | 
 | 	struct imxmci_host *host = (struct imxmci_host *)data; | 
 | 	u32 stat; | 
 | 	unsigned int data_dir_mask = 0;	/* STATUS_WR_CRC_ERROR_CODE_MASK */ | 
 | 	int timeout = 0; | 
 |  | 
 | 	if(atomic_read(&host->stuck_timeout) > 4) { | 
 | 		char *what; | 
 | 		timeout = 1; | 
 | 		stat = MMC_STATUS; | 
 | 		host->status_reg = stat; | 
 | 		if (test_bit(IMXMCI_PEND_WAIT_RESP_b, &host->pending_events)) | 
 | 			if (test_bit(IMXMCI_PEND_DMA_DATA_b, &host->pending_events)) | 
 | 				what = "RESP+DMA"; | 
 | 			else | 
 | 				what = "RESP"; | 
 | 		else | 
 | 			if (test_bit(IMXMCI_PEND_DMA_DATA_b, &host->pending_events)) | 
 | 				if(test_bit(IMXMCI_PEND_DMA_END_b, &host->pending_events)) | 
 | 					what = "DATA"; | 
 | 				else | 
 | 					what = "DMA"; | 
 | 			else | 
 | 				what = "???"; | 
 |  | 
 | 		dev_err(mmc_dev(host->mmc), "%s TIMEOUT, hardware stucked STATUS = 0x%04x IMASK = 0x%04x\n", | 
 | 		       what, stat, MMC_INT_MASK); | 
 | 		dev_err(mmc_dev(host->mmc), "CMD_DAT_CONT = 0x%04x, MMC_BLK_LEN = 0x%04x, MMC_NOB = 0x%04x, DMA_CCR = 0x%08x\n", | 
 | 		       MMC_CMD_DAT_CONT, MMC_BLK_LEN, MMC_NOB, CCR(host->dma)); | 
 | 		dev_err(mmc_dev(host->mmc), "CMD%d, prevCMD%d, bus %d-bit, dma_size = 0x%x\n", | 
 | 		       host->cmd?host->cmd->opcode:0, host->prev_cmd_code, 1<<host->actual_bus_width, host->dma_size); | 
 | 	} | 
 |  | 
 | 	if(!host->present || timeout) | 
 | 		host->status_reg = STATUS_TIME_OUT_RESP | STATUS_TIME_OUT_READ | | 
 | 				    STATUS_CRC_READ_ERR | STATUS_CRC_WRITE_ERR; | 
 |  | 
 | 	if(test_bit(IMXMCI_PEND_IRQ_b, &host->pending_events) || timeout) { | 
 | 		clear_bit(IMXMCI_PEND_IRQ_b, &host->pending_events); | 
 |  | 
 | 		stat = MMC_STATUS; | 
 | 		/* | 
 | 		 * This is not required in theory, but there is chance to miss some flag | 
 | 		 * which clears automatically by mask write, FreeScale original code keeps | 
 | 		 * stat from IRQ time so do I | 
 | 		 */ | 
 | 		stat |= host->status_reg; | 
 |  | 
 | 		if(test_bit(IMXMCI_PEND_WAIT_RESP_b, &host->pending_events)) { | 
 | 			imxmci_busy_wait_for_status(host, &stat, | 
 | 					STATUS_END_CMD_RESP | STATUS_ERR_MASK, | 
 | 					20, "imxmci_tasklet_fnc resp (ERRATUM #4)"); | 
 | 		} | 
 |  | 
 | 		if(stat & (STATUS_END_CMD_RESP | STATUS_ERR_MASK)) { | 
 | 			if(test_and_clear_bit(IMXMCI_PEND_WAIT_RESP_b, &host->pending_events)) | 
 | 				imxmci_cmd_done(host, stat); | 
 | 			if(host->data && (stat & STATUS_ERR_MASK)) | 
 | 				imxmci_data_done(host, stat); | 
 | 		} | 
 |  | 
 | 		if(test_bit(IMXMCI_PEND_CPU_DATA_b, &host->pending_events)) { | 
 | 			stat |= MMC_STATUS; | 
 | 			if(imxmci_cpu_driven_data(host, &stat)){ | 
 | 				if(test_and_clear_bit(IMXMCI_PEND_WAIT_RESP_b, &host->pending_events)) | 
 | 					imxmci_cmd_done(host, stat); | 
 | 				atomic_clear_mask(IMXMCI_PEND_IRQ_m|IMXMCI_PEND_CPU_DATA_m, | 
 | 							&host->pending_events); | 
 | 				imxmci_data_done(host, stat); | 
 | 			} | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if(test_bit(IMXMCI_PEND_DMA_END_b, &host->pending_events) && | 
 | 	   !test_bit(IMXMCI_PEND_WAIT_RESP_b, &host->pending_events)) { | 
 |  | 
 | 		stat = MMC_STATUS; | 
 | 		/* Same as above */ | 
 | 		stat |= host->status_reg; | 
 |  | 
 | 		if(host->dma_dir == DMA_TO_DEVICE) { | 
 | 			data_dir_mask = STATUS_WRITE_OP_DONE; | 
 | 		} else { | 
 | 			data_dir_mask = STATUS_DATA_TRANS_DONE; | 
 | 		} | 
 |  | 
 | 		if(stat & data_dir_mask) { | 
 | 			clear_bit(IMXMCI_PEND_DMA_END_b, &host->pending_events); | 
 | 			imxmci_data_done(host, stat); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if(test_and_clear_bit(IMXMCI_PEND_CARD_XCHG_b, &host->pending_events)) { | 
 |  | 
 | 		if(host->cmd) | 
 | 			imxmci_cmd_done(host, STATUS_TIME_OUT_RESP); | 
 |  | 
 | 		if(host->data) | 
 | 			imxmci_data_done(host, STATUS_TIME_OUT_READ | | 
 | 					 STATUS_CRC_READ_ERR | STATUS_CRC_WRITE_ERR); | 
 |  | 
 | 		if(host->req) | 
 | 			imxmci_finish_request(host, host->req); | 
 |  | 
 | 		mmc_detect_change(host->mmc, msecs_to_jiffies(100)); | 
 |  | 
 | 	} | 
 | } | 
 |  | 
 | static void imxmci_request(struct mmc_host *mmc, struct mmc_request *req) | 
 | { | 
 | 	struct imxmci_host *host = mmc_priv(mmc); | 
 | 	unsigned int cmdat; | 
 |  | 
 | 	WARN_ON(host->req != NULL); | 
 |  | 
 | 	host->req = req; | 
 |  | 
 | 	cmdat = 0; | 
 |  | 
 | 	if (req->data) { | 
 | 		imxmci_setup_data(host, req->data); | 
 |  | 
 | 		cmdat |= CMD_DAT_CONT_DATA_ENABLE; | 
 |  | 
 | 		if (req->data->flags & MMC_DATA_WRITE) | 
 | 			cmdat |= CMD_DAT_CONT_WRITE; | 
 |  | 
 | 		if (req->data->flags & MMC_DATA_STREAM) { | 
 | 			cmdat |= CMD_DAT_CONT_STREAM_BLOCK; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	imxmci_start_cmd(host, req->cmd, cmdat); | 
 | } | 
 |  | 
 | #define CLK_RATE 19200000 | 
 |  | 
 | static void imxmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) | 
 | { | 
 | 	struct imxmci_host *host = mmc_priv(mmc); | 
 | 	int prescaler; | 
 |  | 
 | 	if( ios->bus_width==MMC_BUS_WIDTH_4 ) { | 
 | 		host->actual_bus_width = MMC_BUS_WIDTH_4; | 
 | 		imx_gpio_mode(PB11_PF_SD_DAT3); | 
 | 	}else{ | 
 | 		host->actual_bus_width = MMC_BUS_WIDTH_1; | 
 | 		imx_gpio_mode(GPIO_PORTB | GPIO_IN | GPIO_PUEN | 11); | 
 | 	} | 
 |  | 
 | 	if ( host->power_mode != ios->power_mode ) { | 
 | 		switch (ios->power_mode) { | 
 | 		case MMC_POWER_OFF: | 
 |         		break; | 
 | 		case MMC_POWER_UP: | 
 | 			set_bit(IMXMCI_PEND_SET_INIT_b, &host->pending_events); | 
 |         		break; | 
 | 		case MMC_POWER_ON: | 
 |         		break; | 
 | 		} | 
 | 		host->power_mode = ios->power_mode; | 
 | 	} | 
 |  | 
 | 	if ( ios->clock ) { | 
 | 		unsigned int clk; | 
 |  | 
 | 		/* The prescaler is 5 for PERCLK2 equal to 96MHz | 
 | 		 * then 96MHz / 5 = 19.2 MHz | 
 | 		 */ | 
 | 		clk=imx_get_perclk2(); | 
 | 		prescaler=(clk+(CLK_RATE*7)/8)/CLK_RATE; | 
 | 		switch(prescaler) { | 
 | 		case 0: | 
 | 		case 1:	prescaler = 0; | 
 | 			break; | 
 | 		case 2:	prescaler = 1; | 
 | 			break; | 
 | 		case 3:	prescaler = 2; | 
 | 			break; | 
 | 		case 4:	prescaler = 4; | 
 | 			break; | 
 | 		default: | 
 | 		case 5:	prescaler = 5; | 
 | 			break; | 
 | 		} | 
 |  | 
 | 		dev_dbg(mmc_dev(host->mmc), "PERCLK2 %d MHz -> prescaler %d\n", | 
 | 			clk, prescaler); | 
 |  | 
 | 		for(clk=0; clk<8; clk++) { | 
 | 			int x; | 
 | 			x = CLK_RATE / (1<<clk); | 
 | 			if( x <= ios->clock) | 
 | 				break; | 
 | 		} | 
 |  | 
 | 		MMC_STR_STP_CLK |= STR_STP_CLK_ENABLE; /* enable controller */ | 
 |  | 
 | 		imxmci_stop_clock(host); | 
 | 		MMC_CLK_RATE = (prescaler<<3) | clk; | 
 | 		/* | 
 | 		 * Under my understanding, clock should not be started there, because it would | 
 | 		 * initiate SDHC sequencer and send last or random command into card | 
 | 		 */ | 
 | 		/*imxmci_start_clock(host);*/ | 
 |  | 
 | 		dev_dbg(mmc_dev(host->mmc), "MMC_CLK_RATE: 0x%08x\n", MMC_CLK_RATE); | 
 | 	} else { | 
 | 		imxmci_stop_clock(host); | 
 | 	} | 
 | } | 
 |  | 
 | static const struct mmc_host_ops imxmci_ops = { | 
 | 	.request	= imxmci_request, | 
 | 	.set_ios	= imxmci_set_ios, | 
 | }; | 
 |  | 
 | static struct resource *platform_device_resource(struct platform_device *dev, unsigned int mask, int nr) | 
 | { | 
 | 	int i; | 
 |  | 
 | 	for (i = 0; i < dev->num_resources; i++) | 
 | 		if (dev->resource[i].flags == mask && nr-- == 0) | 
 | 			return &dev->resource[i]; | 
 | 	return NULL; | 
 | } | 
 |  | 
 | static int platform_device_irq(struct platform_device *dev, int nr) | 
 | { | 
 | 	int i; | 
 |  | 
 | 	for (i = 0; i < dev->num_resources; i++) | 
 | 		if (dev->resource[i].flags == IORESOURCE_IRQ && nr-- == 0) | 
 | 			return dev->resource[i].start; | 
 | 	return NO_IRQ; | 
 | } | 
 |  | 
 | static void imxmci_check_status(unsigned long data) | 
 | { | 
 | 	struct imxmci_host *host = (struct imxmci_host *)data; | 
 |  | 
 | 	if( host->pdata->card_present() != host->present ) { | 
 | 		host->present ^= 1; | 
 | 		dev_info(mmc_dev(host->mmc), "card %s\n", | 
 | 		      host->present ? "inserted" : "removed"); | 
 |  | 
 | 		set_bit(IMXMCI_PEND_CARD_XCHG_b, &host->pending_events); | 
 | 		tasklet_schedule(&host->tasklet); | 
 | 	} | 
 |  | 
 | 	if(test_bit(IMXMCI_PEND_WAIT_RESP_b, &host->pending_events) || | 
 | 	   test_bit(IMXMCI_PEND_DMA_DATA_b, &host->pending_events)) { | 
 | 		atomic_inc(&host->stuck_timeout); | 
 | 		if(atomic_read(&host->stuck_timeout) > 4) | 
 | 			tasklet_schedule(&host->tasklet); | 
 | 	} else { | 
 | 		atomic_set(&host->stuck_timeout, 0); | 
 |  | 
 | 	} | 
 |  | 
 | 	mod_timer(&host->timer, jiffies + (HZ>>1)); | 
 | } | 
 |  | 
 | static int imxmci_probe(struct platform_device *pdev) | 
 | { | 
 | 	struct mmc_host *mmc; | 
 | 	struct imxmci_host *host = NULL; | 
 | 	struct resource *r; | 
 | 	int ret = 0, irq; | 
 |  | 
 | 	printk(KERN_INFO "i.MX mmc driver\n"); | 
 |  | 
 | 	r = platform_device_resource(pdev, IORESOURCE_MEM, 0); | 
 | 	irq = platform_device_irq(pdev, 0); | 
 | 	if (!r || irq == NO_IRQ) | 
 | 		return -ENXIO; | 
 |  | 
 | 	r = request_mem_region(r->start, 0x100, "IMXMCI"); | 
 | 	if (!r) | 
 | 		return -EBUSY; | 
 |  | 
 | 	mmc = mmc_alloc_host(sizeof(struct imxmci_host), &pdev->dev); | 
 | 	if (!mmc) { | 
 | 		ret = -ENOMEM; | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	mmc->ops = &imxmci_ops; | 
 | 	mmc->f_min = 150000; | 
 | 	mmc->f_max = CLK_RATE/2; | 
 | 	mmc->ocr_avail = MMC_VDD_32_33; | 
 | 	mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_BYTEBLOCK; | 
 |  | 
 | 	/* MMC core transfer sizes tunable parameters */ | 
 | 	mmc->max_hw_segs = 64; | 
 | 	mmc->max_phys_segs = 64; | 
 | 	mmc->max_seg_size = 64*512;	/* default PAGE_CACHE_SIZE */ | 
 | 	mmc->max_req_size = 64*512;	/* default PAGE_CACHE_SIZE */ | 
 | 	mmc->max_blk_size = 2048; | 
 | 	mmc->max_blk_count = 65535; | 
 |  | 
 | 	host = mmc_priv(mmc); | 
 | 	host->mmc = mmc; | 
 | 	host->dma_allocated = 0; | 
 | 	host->pdata = pdev->dev.platform_data; | 
 |  | 
 | 	spin_lock_init(&host->lock); | 
 | 	host->res = r; | 
 | 	host->irq = irq; | 
 |  | 
 | 	imx_gpio_mode(PB8_PF_SD_DAT0); | 
 | 	imx_gpio_mode(PB9_PF_SD_DAT1); | 
 | 	imx_gpio_mode(PB10_PF_SD_DAT2); | 
 | 	/* Configured as GPIO with pull-up to ensure right MCC card mode */ | 
 | 	/* Switched to PB11_PF_SD_DAT3 if 4 bit bus is configured */ | 
 | 	imx_gpio_mode(GPIO_PORTB | GPIO_IN | GPIO_PUEN | 11); | 
 | 	/* imx_gpio_mode(PB11_PF_SD_DAT3); */ | 
 | 	imx_gpio_mode(PB12_PF_SD_CLK); | 
 | 	imx_gpio_mode(PB13_PF_SD_CMD); | 
 |  | 
 | 	imxmci_softreset(); | 
 |  | 
 | 	if ( MMC_REV_NO != 0x390 ) { | 
 | 		dev_err(mmc_dev(host->mmc), "wrong rev.no. 0x%08x. aborting.\n", | 
 | 		        MMC_REV_NO); | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	MMC_READ_TO = 0x2db4; /* recommended in data sheet */ | 
 |  | 
 | 	host->imask = IMXMCI_INT_MASK_DEFAULT; | 
 | 	MMC_INT_MASK = host->imask; | 
 |  | 
 |  | 
 | 	if(imx_dma_request_by_prio(&host->dma, DRIVER_NAME, DMA_PRIO_LOW)<0){ | 
 | 		dev_err(mmc_dev(host->mmc), "imx_dma_request_by_prio failed\n"); | 
 | 		ret = -EBUSY; | 
 | 		goto out; | 
 | 	} | 
 | 	host->dma_allocated=1; | 
 | 	imx_dma_setup_handlers(host->dma, imxmci_dma_irq, NULL, host); | 
 |  | 
 | 	tasklet_init(&host->tasklet, imxmci_tasklet_fnc, (unsigned long)host); | 
 | 	host->status_reg=0; | 
 | 	host->pending_events=0; | 
 |  | 
 | 	ret = request_irq(host->irq, imxmci_irq, 0, DRIVER_NAME, host); | 
 | 	if (ret) | 
 | 		goto out; | 
 |  | 
 | 	host->present = host->pdata->card_present(); | 
 | 	init_timer(&host->timer); | 
 | 	host->timer.data = (unsigned long)host; | 
 | 	host->timer.function = imxmci_check_status; | 
 | 	add_timer(&host->timer); | 
 | 	mod_timer(&host->timer, jiffies + (HZ>>1)); | 
 |  | 
 | 	platform_set_drvdata(pdev, mmc); | 
 |  | 
 | 	mmc_add_host(mmc); | 
 |  | 
 | 	return 0; | 
 |  | 
 | out: | 
 | 	if (host) { | 
 | 		if(host->dma_allocated){ | 
 | 			imx_dma_free(host->dma); | 
 | 			host->dma_allocated=0; | 
 | 		} | 
 | 	} | 
 | 	if (mmc) | 
 | 		mmc_free_host(mmc); | 
 | 	release_resource(r); | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int imxmci_remove(struct platform_device *pdev) | 
 | { | 
 | 	struct mmc_host *mmc = platform_get_drvdata(pdev); | 
 |  | 
 | 	platform_set_drvdata(pdev, NULL); | 
 |  | 
 | 	if (mmc) { | 
 | 		struct imxmci_host *host = mmc_priv(mmc); | 
 |  | 
 | 		tasklet_disable(&host->tasklet); | 
 |  | 
 | 		del_timer_sync(&host->timer); | 
 | 		mmc_remove_host(mmc); | 
 |  | 
 | 		free_irq(host->irq, host); | 
 | 		if(host->dma_allocated){ | 
 | 			imx_dma_free(host->dma); | 
 | 			host->dma_allocated=0; | 
 | 		} | 
 |  | 
 | 		tasklet_kill(&host->tasklet); | 
 |  | 
 | 		release_resource(host->res); | 
 |  | 
 | 		mmc_free_host(mmc); | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | #ifdef CONFIG_PM | 
 | static int imxmci_suspend(struct platform_device *dev, pm_message_t state) | 
 | { | 
 | 	struct mmc_host *mmc = platform_get_drvdata(dev); | 
 | 	int ret = 0; | 
 |  | 
 | 	if (mmc) | 
 | 		ret = mmc_suspend_host(mmc, state); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int imxmci_resume(struct platform_device *dev) | 
 | { | 
 | 	struct mmc_host *mmc = platform_get_drvdata(dev); | 
 | 	struct imxmci_host *host; | 
 | 	int ret = 0; | 
 |  | 
 | 	if (mmc) { | 
 | 		host = mmc_priv(mmc); | 
 | 		if(host) | 
 | 			set_bit(IMXMCI_PEND_SET_INIT_b, &host->pending_events); | 
 | 		ret = mmc_resume_host(mmc); | 
 | 	} | 
 |  | 
 | 	return ret; | 
 | } | 
 | #else | 
 | #define imxmci_suspend  NULL | 
 | #define imxmci_resume   NULL | 
 | #endif /* CONFIG_PM */ | 
 |  | 
 | static struct platform_driver imxmci_driver = { | 
 | 	.probe		= imxmci_probe, | 
 | 	.remove		= imxmci_remove, | 
 | 	.suspend	= imxmci_suspend, | 
 | 	.resume		= imxmci_resume, | 
 | 	.driver		= { | 
 | 		.name		= DRIVER_NAME, | 
 | 	} | 
 | }; | 
 |  | 
 | static int __init imxmci_init(void) | 
 | { | 
 | 	return platform_driver_register(&imxmci_driver); | 
 | } | 
 |  | 
 | static void __exit imxmci_exit(void) | 
 | { | 
 | 	platform_driver_unregister(&imxmci_driver); | 
 | } | 
 |  | 
 | module_init(imxmci_init); | 
 | module_exit(imxmci_exit); | 
 |  | 
 | MODULE_DESCRIPTION("i.MX Multimedia Card Interface Driver"); | 
 | MODULE_AUTHOR("Sascha Hauer, Pengutronix"); | 
 | MODULE_LICENSE("GPL"); |