iwlegacy: rename iwl to il
iwl_legacy prefix result in long function names, what cause that we
have frequent line split and not readable code. Also iwl_foo symbols
are duplicated in iwlwifi driver, what is annoying when editing
kernel tree with cscope.
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
diff --git a/drivers/net/wireless/iwlegacy/iwl-csr.h b/drivers/net/wireless/iwlegacy/iwl-csr.h
index 668a961..24b71ae 100644
--- a/drivers/net/wireless/iwlegacy/iwl-csr.h
+++ b/drivers/net/wireless/iwlegacy/iwl-csr.h
@@ -60,8 +60,8 @@
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*****************************************************************************/
-#ifndef __iwl_legacy_csr_h__
-#define __iwl_legacy_csr_h__
+#ifndef __il_csr_h__
+#define __il_csr_h__
/*
* CSR (control and status registers)
*
@@ -70,9 +70,9 @@
* low power states due to driver-invoked device resets
* (e.g. CSR_RESET_REG_FLAG_SW_RESET) or uCode-driven power-saving modes.
*
- * Use iwl_write32() and iwl_read32() family to access these registers;
+ * Use il_write32() and il_read32() family to access these registers;
* these provide simple PCI bus access, without waking up the MAC.
- * Do not use iwl_legacy_write_direct32() family for these registers;
+ * Do not use il_write_direct32() family for these registers;
* no need to "grab nic access" via CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ.
* The MAC (uCode processor, etc.) does not need to be powered up for accessing
* the CSR registers.
@@ -91,7 +91,7 @@
#define CSR_RESET (CSR_BASE+0x020) /* busmaster enable, NMI, etc*/
#define CSR_GP_CNTRL (CSR_BASE+0x024)
-/* 2nd byte of CSR_INT_COALESCING, not accessible via iwl_write32()! */
+/* 2nd byte of CSR_INT_COALESCING, not accessible via il_write32()! */
#define CSR_INT_PERIODIC_REG (CSR_BASE+0x005)
/*
@@ -368,13 +368,13 @@
* to indirectly access device's internal memory or registers that
* may be powered-down.
*
- * Use iwl_legacy_write_direct32()/iwl_legacy_read_direct32() family
+ * Use il_write_direct32()/il_read_direct32() family
* for these registers;
* host must "grab nic access" via CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ
* to make sure the MAC (uCode processor, etc.) is powered up for accessing
* internal resources.
*
- * Do not use iwl_write32()/iwl_read32() family to access these registers;
+ * Do not use il_write32()/il_read32() family to access these registers;
* these provide only simple PCI bus access, without waking up the MAC.
*/
#define HBUS_BASE (0x400)
@@ -419,4 +419,4 @@
*/
#define HBUS_TARG_WRPTR (HBUS_BASE+0x060)
-#endif /* !__iwl_legacy_csr_h__ */
+#endif /* !__il_csr_h__ */