isci: uplevel port infrastructure
* Move port configuration agent implementation
* Merge core/scic_sds_port.[ch] into port.[ch]
Reported-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
diff --git a/drivers/scsi/isci/probe_roms.h b/drivers/scsi/isci/probe_roms.h
index f4ef19a..7e3e6d7 100644
--- a/drivers/scsi/isci/probe_roms.h
+++ b/drivers/scsi/isci/probe_roms.h
@@ -60,15 +60,117 @@
#include <linux/pci.h>
#include "isci.h"
-struct isci_orom *isci_request_oprom(struct pci_dev *pdev);
+#define SCIC_SDS_PARM_NO_SPEED 0
+
+/* generation 1 (i.e. 1.5 Gb/s) */
+#define SCIC_SDS_PARM_GEN1_SPEED 1
+
+/* generation 2 (i.e. 3.0 Gb/s) */
+#define SCIC_SDS_PARM_GEN2_SPEED 2
+
+/* generation 3 (i.e. 6.0 Gb/s) */
+#define SCIC_SDS_PARM_GEN3_SPEED 3
+#define SCIC_SDS_PARM_MAX_SPEED SCIC_SDS_PARM_GEN3_SPEED
+
+/* parameters that can be set by module parameters */
+struct scic_sds_user_parameters {
+ struct sci_phy_user_params {
+ /**
+ * This field specifies the NOTIFY (ENABLE SPIN UP) primitive
+ * insertion frequency for this phy index.
+ */
+ u32 notify_enable_spin_up_insertion_frequency;
+
+ /**
+ * This method specifies the number of transmitted DWORDs within which
+ * to transmit a single ALIGN primitive. This value applies regardless
+ * of what type of device is attached or connection state. A value of
+ * 0 indicates that no ALIGN primitives will be inserted.
+ */
+ u16 align_insertion_frequency;
+
+ /**
+ * This method specifies the number of transmitted DWORDs within which
+ * to transmit 2 ALIGN primitives. This applies for SAS connections
+ * only. A minimum value of 3 is required for this field.
+ */
+ u16 in_connection_align_insertion_frequency;
+
+ /**
+ * This field indicates the maximum speed generation to be utilized
+ * by phys in the supplied port.
+ * - A value of 1 indicates generation 1 (i.e. 1.5 Gb/s).
+ * - A value of 2 indicates generation 2 (i.e. 3.0 Gb/s).
+ * - A value of 3 indicates generation 3 (i.e. 6.0 Gb/s).
+ */
+ u8 max_speed_generation;
+
+ } phys[SCI_MAX_PHYS];
+
+ /**
+ * This field specifies the maximum number of direct attached devices
+ * that can have power supplied to them simultaneously.
+ */
+ u8 max_number_concurrent_device_spin_up;
+
+ /**
+ * This field specifies the number of seconds to allow a phy to consume
+ * power before yielding to another phy.
+ *
+ */
+ u8 phy_spin_up_delay_interval;
+
+ /**
+ * These timer values specifies how long a link will remain open with no
+ * activity in increments of a microsecond, it can be in increments of
+ * 100 microseconds if the upper most bit is set.
+ *
+ */
+ u16 stp_inactivity_timeout;
+ u16 ssp_inactivity_timeout;
+
+ /**
+ * These timer values specifies how long a link will remain open in increments
+ * of 100 microseconds.
+ *
+ */
+ u16 stp_max_occupancy_timeout;
+ u16 ssp_max_occupancy_timeout;
+
+ /**
+ * This timer value specifies how long a link will remain open with no
+ * outbound traffic in increments of a microsecond.
+ *
+ */
+ u8 no_outbound_task_timeout;
+
+};
+
+/* XXX kill this union */
+union scic_user_parameters {
+ /**
+ * This field specifies the user parameters specific to the
+ * Storage Controller Unit (SCU) Driver Standard (SDS) version
+ * 1.
+ */
+ struct scic_sds_user_parameters sds1;
+};
+
+#define SCIC_SDS_PARM_PHY_MASK_MIN 0x0
+#define SCIC_SDS_PARM_PHY_MASK_MAX 0xF
+#define MAX_CONCURRENT_DEVICE_SPIN_UP_COUNT 4
+
+struct scic_sds_oem_params;
+int scic_oem_parameters_validate(struct scic_sds_oem_params *oem);
union scic_oem_parameters;
-struct isci_orom;
+void scic_oem_parameters_get(struct scic_sds_controller *scic,
+ union scic_oem_parameters *oem);
-enum sci_status isci_parse_oem_parameters(
- union scic_oem_parameters *oem_params,
- struct isci_orom *orom,
- int scu_index);
+struct isci_orom;
+struct isci_orom *isci_request_oprom(struct pci_dev *pdev);
+enum sci_status isci_parse_oem_parameters(union scic_oem_parameters *oem,
+ struct isci_orom *orom, int scu_index);
struct isci_orom *isci_request_firmware(struct pci_dev *pdev, const struct firmware *fw);
struct isci_orom *isci_get_efi_var(struct pci_dev *pdev);
@@ -153,6 +255,16 @@
} phys[SCI_MAX_PHYS];
} __attribute__ ((packed));
+/* XXX kill this union */
+union scic_oem_parameters {
+ /**
+ * This field specifies the OEM parameters specific to the
+ * Storage Controller Unit (SCU) Driver Standard (SDS) version
+ * 1.
+ */
+ struct scic_sds_oem_params sds1;
+};
+
struct isci_orom {
struct sci_bios_oem_param_block_hdr hdr;
struct scic_sds_oem_params ctrl[SCI_MAX_CONTROLLERS];