Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc:
mmc: Correct definition of R6
omap: Update MMC response types
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index f2024df..fc53239 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -273,3 +273,48 @@
Who: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
---------------------------
+
+What: ACPI hotkey driver (CONFIG_ACPI_HOTKEY)
+When: 2.6.21
+Why: hotkey.c was an attempt to consolidate multiple drivers that use
+ ACPI to implement hotkeys. However, hotkeys are not documented
+ in the ACPI specification, so the drivers used undocumented
+ vendor-specific hooks and turned out to be more different than
+ the same.
+
+ Further, the keys and the features supplied by each platform
+ are different, so there will always be a need for
+ platform-specific drivers.
+
+ So the new plan is to delete hotkey.c and instead, work on the
+ platform specific drivers to try to make them look the same
+ to the user when they supply the same features.
+
+ hotkey.c has always depended on CONFIG_EXPERIMENTAL
+
+Who: Len Brown <len.brown@intel.com>
+
+---------------------------
+
+What: /sys/firmware/acpi/namespace
+When: 2.6.21
+Why: The ACPI namespace is effectively the symbol list for
+ the BIOS. The device names are completely arbitrary
+ and have no place being exposed to user-space.
+
+ For those interested in the BIOS ACPI namespace,
+ the BIOS can be extracted and disassembled with acpidump
+ and iasl as documented in the pmtools package here:
+ http://ftp.kernel.org/pub/linux/kernel/people/lenb/acpi/utils
+
+Who: Len Brown <len.brown@intel.com>
+
+---------------------------
+
+What: /proc/acpi/button
+When: August 2007
+Why: /proc/acpi/button has been replaced by events to the input layer
+ since 2.6.20.
+Who: Len Brown <len.brown@intel.com>
+
+---------------------------
diff --git a/Documentation/filesystems/Locking b/Documentation/filesystems/Locking
index 790ef6f..28bfea7 100644
--- a/Documentation/filesystems/Locking
+++ b/Documentation/filesystems/Locking
@@ -171,6 +171,7 @@
int (*releasepage) (struct page *, int);
int (*direct_IO)(int, struct kiocb *, const struct iovec *iov,
loff_t offset, unsigned long nr_segs);
+ int (*launder_page) (struct page *);
locking rules:
All except set_page_dirty may block
@@ -188,6 +189,7 @@
invalidatepage: no yes
releasepage: no yes
direct_IO: no
+launder_page: no yes
->prepare_write(), ->commit_write(), ->sync_page() and ->readpage()
may be called from the request handler (/dev/loop).
@@ -281,6 +283,12 @@
indicate that the buffers are (or may be) freeable. If ->releasepage is zero,
the kernel assumes that the fs has no private interest in the buffers.
+ ->launder_page() may be called prior to releasing a page if
+it is still found to be dirty. It returns zero if the page was successfully
+cleaned, or an error value if not. Note that in order to prevent the page
+getting mapped back in and redirtied, it needs to be kept locked
+across the entire operation.
+
Note: currently almost all instances of address_space methods are
using BKL for internal serialization and that's one of the worst sources
of contention. Normally they are calling library functions (in fs/buffer.c)
diff --git a/Documentation/kdump/kdump.txt b/Documentation/kdump/kdump.txt
index 99f2d4d..5af6676 100644
--- a/Documentation/kdump/kdump.txt
+++ b/Documentation/kdump/kdump.txt
@@ -17,7 +17,7 @@
memory image to a dump file on the local disk, or across the network to
a remote system.
-Kdump and kexec are currently supported on the x86, x86_64, and ppc64
+Kdump and kexec are currently supported on the x86, x86_64, ppc64 and IA64
architectures.
When the system kernel boots, it reserves a small section of memory for
@@ -54,59 +54,64 @@
Setup and Installation
======================
-Install kexec-tools and the Kdump patch
----------------------------------------
+Install kexec-tools
+-------------------
1) Login as the root user.
2) Download the kexec-tools user-space package from the following URL:
- http://www.xmission.com/~ebiederm/files/kexec/kexec-tools-1.101.tar.gz
+http://www.kernel.org/pub/linux/kernel/people/horms/kexec-tools/kexec-tools-testing-20061214.tar.gz
+
+Note: Latest kexec-tools-testing git tree is available at
+
+git://git.kernel.org/pub/scm/linux/kernel/git/horms/kexec-tools-testing.git
+or
+http://www.kernel.org/git/?p=linux/kernel/git/horms/kexec-tools-testing.git;a=summary
3) Unpack the tarball with the tar command, as follows:
- tar xvpzf kexec-tools-1.101.tar.gz
+ tar xvpzf kexec-tools-testing-20061214.tar.gz
-4) Download the latest consolidated Kdump patch from the following URL:
+4) Change to the kexec-tools-1.101 directory, as follows:
- http://lse.sourceforge.net/kdump/
+ cd kexec-tools-testing-20061214
- (This location is being used until all the user-space Kdump patches
- are integrated with the kexec-tools package.)
-
-5) Change to the kexec-tools-1.101 directory, as follows:
-
- cd kexec-tools-1.101
-
-6) Apply the consolidated patch to the kexec-tools-1.101 source tree
- with the patch command, as follows. (Modify the path to the downloaded
- patch as necessary.)
-
- patch -p1 < /path-to-kdump-patch/kexec-tools-1.101-kdump.patch
-
-7) Configure the package, as follows:
+5) Configure the package, as follows:
./configure
-8) Compile the package, as follows:
+6) Compile the package, as follows:
make
-9) Install the package, as follows:
+7) Install the package, as follows:
make install
-Download and build the system and dump-capture kernels
-------------------------------------------------------
+Build the system and dump-capture kernels
+-----------------------------------------
+There are two possible methods of using Kdump.
-Download the mainline (vanilla) kernel source code (2.6.13-rc1 or newer)
-from http://www.kernel.org. Two kernels must be built: a system kernel
-and a dump-capture kernel. Use the following steps to configure these
-kernels with the necessary kexec and Kdump features:
+1) Build a separate custom dump-capture kernel for capturing the
+ kernel core dump.
-System kernel
--------------
+2) Or use the system kernel binary itself as dump-capture kernel and there is
+ no need to build a separate dump-capture kernel. This is possible
+ only with the architecutres which support a relocatable kernel. As
+ of today i386 and ia64 architectures support relocatable kernel.
+
+Building a relocatable kernel is advantageous from the point of view that
+one does not have to build a second kernel for capturing the dump. But
+at the same time one might want to build a custom dump capture kernel
+suitable to his needs.
+
+Following are the configuration setting required for system and
+dump-capture kernels for enabling kdump support.
+
+System kernel config options
+----------------------------
1) Enable "kexec system call" in "Processor type and features."
@@ -132,89 +137,161 @@
analysis tools require a vmlinux with debug symbols in order to read
and analyze a dump file.
-4) Make and install the kernel and its modules. Update the boot loader
- (such as grub, yaboot, or lilo) configuration files as necessary.
+Dump-capture kernel config options (Arch Independent)
+-----------------------------------------------------
-5) Boot the system kernel with the boot parameter "crashkernel=Y@X",
- where Y specifies how much memory to reserve for the dump-capture kernel
- and X specifies the beginning of this reserved memory. For example,
- "crashkernel=64M@16M" tells the system kernel to reserve 64 MB of memory
- starting at physical address 0x01000000 for the dump-capture kernel.
+1) Enable "kernel crash dumps" support under "Processor type and
+ features":
- On x86 and x86_64, use "crashkernel=64M@16M".
+ CONFIG_CRASH_DUMP=y
- On ppc64, use "crashkernel=128M@32M".
+2) Enable "/proc/vmcore support" under "Filesystems" -> "Pseudo filesystems".
+ CONFIG_PROC_VMCORE=y
+ (CONFIG_PROC_VMCORE is set by default when CONFIG_CRASH_DUMP is selected.)
-The dump-capture kernel
------------------------
-
-1) Under "General setup," append "-kdump" to the current string in
- "Local version."
-
-2) On x86, enable high memory support under "Processor type and
+Dump-capture kernel config options (Arch Dependent, i386)
+--------------------------------------------------------
+1) On x86, enable high memory support under "Processor type and
features":
CONFIG_HIGHMEM64G=y
or
CONFIG_HIGHMEM4G
-3) On x86 and x86_64, disable symmetric multi-processing support
+2) On x86 and x86_64, disable symmetric multi-processing support
under "Processor type and features":
CONFIG_SMP=n
+
(If CONFIG_SMP=y, then specify maxcpus=1 on the kernel command line
when loading the dump-capture kernel, see section "Load the Dump-capture
Kernel".)
-4) On ppc64, disable NUMA support and enable EMBEDDED support:
+3) If one wants to build and use a relocatable kernel,
+ Enable "Build a relocatable kernel" support under "Processor type and
+ features"
- CONFIG_NUMA=n
- CONFIG_EMBEDDED=y
- CONFIG_EEH=N for the dump-capture kernel
+ CONFIG_RELOCATABLE=y
-5) Enable "kernel crash dumps" support under "Processor type and
- features":
+4) Use a suitable value for "Physical address where the kernel is
+ loaded" (under "Processor type and features"). This only appears when
+ "kernel crash dumps" is enabled. A suitable value depends upon
+ whether kernel is relocatable or not.
- CONFIG_CRASH_DUMP=y
+ If you are using a relocatable kernel use CONFIG_PHYSICAL_START=0x100000
+ This will compile the kernel for physical address 1MB, but given the fact
+ kernel is relocatable, it can be run from any physical address hence
+ kexec boot loader will load it in memory region reserved for dump-capture
+ kernel.
-6) Use a suitable value for "Physical address where the kernel is
+ Otherwise it should be the start of memory region reserved for
+ second kernel using boot parameter "crashkernel=Y@X". Here X is
+ start of memory region reserved for dump-capture kernel.
+ Generally X is 16MB (0x1000000). So you can set
+ CONFIG_PHYSICAL_START=0x1000000
+
+5) Make and install the kernel and its modules. DO NOT add this kernel
+ to the boot loader configuration files.
+
+Dump-capture kernel config options (Arch Dependent, x86_64)
+----------------------------------------------------------
+1) On x86 and x86_64, disable symmetric multi-processing support
+ under "Processor type and features":
+
+ CONFIG_SMP=n
+
+ (If CONFIG_SMP=y, then specify maxcpus=1 on the kernel command line
+ when loading the dump-capture kernel, see section "Load the Dump-capture
+ Kernel".)
+
+2) Use a suitable value for "Physical address where the kernel is
loaded" (under "Processor type and features"). This only appears when
"kernel crash dumps" is enabled. By default this value is 0x1000000
(16MB). It should be the same as X in the "crashkernel=Y@X" boot
- parameter discussed above.
+ parameter.
- On x86 and x86_64, use "CONFIG_PHYSICAL_START=0x1000000".
+ For x86_64, normally "CONFIG_PHYSICAL_START=0x1000000".
- On ppc64 the value is automatically set at 32MB when
- CONFIG_CRASH_DUMP is set.
-
-6) Optionally enable "/proc/vmcore support" under "Filesystems" ->
- "Pseudo filesystems".
-
- CONFIG_PROC_VMCORE=y
- (CONFIG_PROC_VMCORE is set by default when CONFIG_CRASH_DUMP is selected.)
-
-7) Make and install the kernel and its modules. DO NOT add this kernel
+3) Make and install the kernel and its modules. DO NOT add this kernel
to the boot loader configuration files.
+Dump-capture kernel config options (Arch Dependent, ppc64)
+----------------------------------------------------------
+
+- Make and install the kernel and its modules. DO NOT add this kernel
+ to the boot loader configuration files.
+
+Dump-capture kernel config options (Arch Dependent, ia64)
+----------------------------------------------------------
+(To be filled)
+
+
+Boot into System Kernel
+=======================
+
+1) Make and install the kernel and its modules. Update the boot loader
+ (such as grub, yaboot, or lilo) configuration files as necessary.
+
+2) Boot the system kernel with the boot parameter "crashkernel=Y@X",
+ where Y specifies how much memory to reserve for the dump-capture kernel
+ and X specifies the beginning of this reserved memory. For example,
+ "crashkernel=64M@16M" tells the system kernel to reserve 64 MB of memory
+ starting at physical address 0x01000000 (16MB) for the dump-capture kernel.
+
+ On x86 and x86_64, use "crashkernel=64M@16M".
+
+ On ppc64, use "crashkernel=128M@32M".
Load the Dump-capture Kernel
============================
-After booting to the system kernel, load the dump-capture kernel using
-the following command:
+After booting to the system kernel, dump-capture kernel needs to be
+loaded.
- kexec -p <dump-capture-kernel> \
+Based on the architecture and type of image (relocatable or not), one
+can choose to load the uncompressed vmlinux or compressed bzImage/vmlinuz
+of dump-capture kernel. Following is the summary.
+
+For i386:
+ - Use vmlinux if kernel is not relocatable.
+ - Use bzImage/vmlinuz if kernel is relocatable.
+For x86_64:
+ - Use vmlinux
+For ppc64:
+ - Use vmlinux
+For ia64:
+ (To be filled)
+
+If you are using a uncompressed vmlinux image then use following command
+to load dump-capture kernel.
+
+ kexec -p <dump-capture-kernel-vmlinux-image> \
--initrd=<initrd-for-dump-capture-kernel> --args-linux \
- --append="root=<root-dev> init 1 irqpoll"
+ --append="root=<root-dev> <arch-specific-options>"
+
+If you are using a compressed bzImage/vmlinuz, then use following command
+to load dump-capture kernel.
+
+ kexec -p <dump-capture-kernel-bzImage> \
+ --initrd=<initrd-for-dump-capture-kernel> \
+ --append="root=<root-dev> <arch-specific-options>"
+
+Following are the arch specific command line options to be used while
+loading dump-capture kernel.
+
+For i386 and x86_64:
+ "init 1 irqpoll maxcpus=1"
+
+For ppc64:
+ "init 1 maxcpus=1 noirqdistrib"
+
+For IA64
+ (To be filled)
Notes on loading the dump-capture kernel:
-* <dump-capture-kernel> must be a vmlinux image (that is, an
- uncompressed ELF image). bzImage does not work at this time.
-
* By default, the ELF headers are stored in ELF64 format to support
systems with more than 4GB memory. The --elf32-core-headers option can
be used to force the generation of ELF32 headers. This is necessary
@@ -231,6 +308,9 @@
* "init 1" boots the dump-capture kernel into single-user mode without
networking. If you want networking, use "init 3."
+* We generally don' have to bring up a SMP kernel just to capture the
+ dump. Hence generally it is useful either to build a UP dump-capture
+ kernel or specify maxcpus=1 option while loading dump-capture kernel.
Kernel Panic
============
diff --git a/MAINTAINERS b/MAINTAINERS
index 49e4f55..1b1491d 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -207,16 +207,45 @@
ACPI
P: Len Brown
M: len.brown@intel.com
+M: lenb@kernel.org
L: linux-acpi@vger.kernel.org
W: http://acpi.sourceforge.net/
T: git kernel.org:/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6.git
-S: Maintained
+S: Supported
+
+ACPI BATTERY DRIVERS
+P: Vladimir P. Lebedev
+M: vladimir.p.lebedev@intel.com
+L: linux-acpi@vger.kernel.org
+W: http://acpi.sourceforge.net/
+S: Supported
+
+ACPI EC DRIVER
+P: Alexey Starikovskiy
+M: alexey.y.starikovskiy@linux.intel.com
+L: linux-acpi@vger.kernel.org
+W: http://acpi.sourceforge.net/
+S: Supported
+
+ACPI FAN DRIVER
+P: Konstantin A. Karasyov
+M: konstantin.a.karasyov@intel.com
+L: linux-acpi@vger.kernel.org
+W: http://acpi.sourceforge.net/
+S: Supported
ACPI PCI HOTPLUG DRIVER
P: Kristen Carlson Accardi
M: kristen.c.accardi@intel.com
L: pcihpd-discuss@lists.sourceforge.net
-S: Maintained
+S: Supported
+
+ACPI THERMAL DRIVER
+P: Konstantin A. Karasyov
+M: konstantin.a.karasyov@intel.com
+L: linux-acpi@vger.kernel.org
+W: http://acpi.sourceforge.net/
+S: Supported
AD1816 SOUND DRIVER
P: Thorsten Knabe
@@ -1085,7 +1114,7 @@
P: Kristen Carlson Accardi
M: kristen.c.accardi@intel.com
L: linux-acpi@vger.kernel.org
-S: Maintained
+S: Supported
DOUBLETALK DRIVER
P: James R. Van Zandt
@@ -2535,7 +2564,7 @@
P: Kristen Carlson Accardi
M: kristen.c.accardi@intel.com
L: pcihpd-discuss@lists.sourceforge.net
-S: Maintained
+S: Supported
PCMCIA SUBSYSTEM
P: Linux PCMCIA Team
@@ -3041,7 +3070,7 @@
P: Kristen Carlson Accardi
M: kristen.c.accardi@intel.com
L: pcihpd-discuss@lists.sourceforge.net
-S: Maintained
+S: Supported
SECURE DIGITAL HOST CONTROLLER INTERFACE DRIVER
P: Pierre Ossman
diff --git a/Makefile b/Makefile
index 47669cb..477f52e 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 20
-EXTRAVERSION =-rc4
+EXTRAVERSION =-rc5
NAME = Homicidal Dwarf Hamster
# *DOCUMENTATION*
diff --git a/arch/cris/arch-v32/kernel/smp.c b/arch/cris/arch-v32/kernel/smp.c
index 2d0023f..77e655f 100644
--- a/arch/cris/arch-v32/kernel/smp.c
+++ b/arch/cris/arch-v32/kernel/smp.c
@@ -195,7 +195,7 @@
*/
unsigned long cache_decay_ticks = 1;
-int __devinit __cpu_up(unsigned int cpu)
+int __cpuinit __cpu_up(unsigned int cpu)
{
smp_boot_one_cpu(cpu);
return cpu_online(cpu) ? 0 : -ENOSYS;
diff --git a/arch/i386/kernel/acpi/cstate.c b/arch/i386/kernel/acpi/cstate.c
index 12e937c..2d39f55 100644
--- a/arch/i386/kernel/acpi/cstate.c
+++ b/arch/i386/kernel/acpi/cstate.c
@@ -47,13 +47,13 @@
/* The code below handles cstate entry with monitor-mwait pair on Intel*/
-struct cstate_entry_s {
+struct cstate_entry {
struct {
unsigned int eax;
unsigned int ecx;
} states[ACPI_PROCESSOR_MAX_POWER];
};
-static struct cstate_entry_s *cpu_cstate_entry; /* per CPU ptr */
+static struct cstate_entry *cpu_cstate_entry; /* per CPU ptr */
static short mwait_supported[ACPI_PROCESSOR_MAX_POWER];
@@ -71,7 +71,7 @@
int acpi_processor_ffh_cstate_probe(unsigned int cpu,
struct acpi_processor_cx *cx, struct acpi_power_register *reg)
{
- struct cstate_entry_s *percpu_entry;
+ struct cstate_entry *percpu_entry;
struct cpuinfo_x86 *c = cpu_data + cpu;
cpumask_t saved_mask;
@@ -136,7 +136,7 @@
void acpi_processor_ffh_cstate_enter(struct acpi_processor_cx *cx)
{
unsigned int cpu = smp_processor_id();
- struct cstate_entry_s *percpu_entry;
+ struct cstate_entry *percpu_entry;
percpu_entry = per_cpu_ptr(cpu_cstate_entry, cpu);
mwait_idle_with_hints(percpu_entry->states[cx->index].eax,
@@ -150,7 +150,7 @@
if (c->x86_vendor != X86_VENDOR_INTEL)
return -1;
- cpu_cstate_entry = alloc_percpu(struct cstate_entry_s);
+ cpu_cstate_entry = alloc_percpu(struct cstate_entry);
return 0;
}
diff --git a/arch/i386/kernel/cpu/cyrix.c b/arch/i386/kernel/cpu/cyrix.c
index c0c3b59..abcff92 100644
--- a/arch/i386/kernel/cpu/cyrix.c
+++ b/arch/i386/kernel/cpu/cyrix.c
@@ -173,7 +173,7 @@
ccr4 = getCx86(CX86_CCR4);
ccr4 |= 0x38; /* FPU fast, DTE cache, Mem bypass */
- setCx86(CX86_CCR3, ccr3);
+ setCx86(CX86_CCR4, ccr4);
set_cx86_memwb();
set_cx86_reorder();
diff --git a/arch/i386/kernel/tsc.c b/arch/i386/kernel/tsc.c
index 1bbe45d..2cfc7b0 100644
--- a/arch/i386/kernel/tsc.c
+++ b/arch/i386/kernel/tsc.c
@@ -24,7 +24,7 @@
*/
unsigned int tsc_khz;
-int tsc_disable __cpuinitdata = 0;
+int tsc_disable;
#ifdef CONFIG_X86_TSC
static int __init tsc_setup(char *str)
diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c
index 73ef4a85..ef2fe47 100644
--- a/arch/ia64/kernel/acpi.c
+++ b/arch/ia64/kernel/acpi.c
@@ -590,6 +590,9 @@
*/
int acpi_register_gsi(u32 gsi, int triggering, int polarity)
{
+ if (acpi_irq_model == ACPI_IRQ_MODEL_PLATFORM)
+ return gsi;
+
if (has_8259 && gsi < 16)
return isa_irq_to_vector(gsi);
diff --git a/arch/ia64/mm/init.c b/arch/ia64/mm/init.c
index 1a3d8a2..1373fae 100644
--- a/arch/ia64/mm/init.c
+++ b/arch/ia64/mm/init.c
@@ -543,7 +543,8 @@
if (map_start < map_end)
memmap_init_zone((unsigned long)(map_end - map_start),
- args->nid, args->zone, page_to_pfn(map_start));
+ args->nid, args->zone, page_to_pfn(map_start),
+ MEMMAP_EARLY);
return 0;
}
@@ -552,7 +553,7 @@
unsigned long start_pfn)
{
if (!vmem_map)
- memmap_init_zone(size, nid, zone, start_pfn);
+ memmap_init_zone(size, nid, zone, start_pfn, MEMMAP_EARLY);
else {
struct page *start;
struct memmap_init_callback_data args;
diff --git a/arch/ia64/sn/kernel/io_acpi_init.c b/arch/ia64/sn/kernel/io_acpi_init.c
index 99d7f27..cb96b4e 100644
--- a/arch/ia64/sn/kernel/io_acpi_init.c
+++ b/arch/ia64/sn/kernel/io_acpi_init.c
@@ -223,6 +223,9 @@
u64 result;
s64 status;
+ /* SN Altix does not follow the IOSAPIC IRQ routing model */
+ acpi_irq_model = ACPI_IRQ_MODEL_PLATFORM;
+
acpi_bus_register_driver(&acpi_sn_hubdev_driver);
status = sal_ioif_init(&result);
if (status || result)
diff --git a/arch/m32r/kernel/smpboot.c b/arch/m32r/kernel/smpboot.c
index fa78656..48d376f 100644
--- a/arch/m32r/kernel/smpboot.c
+++ b/arch/m32r/kernel/smpboot.c
@@ -351,7 +351,7 @@
}
}
-int __devinit __cpu_up(unsigned int cpu_id)
+int __cpuinit __cpu_up(unsigned int cpu_id)
{
int timeout;
diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c
index f2a8701..0555fc5 100644
--- a/arch/mips/kernel/smp.c
+++ b/arch/mips/kernel/smp.c
@@ -271,7 +271,7 @@
* and keep control until "cpu_online(cpu)" is set. Note: cpu is
* physical, not logical.
*/
-int __devinit __cpu_up(unsigned int cpu)
+int __cpuinit __cpu_up(unsigned int cpu)
{
struct task_struct *idle;
diff --git a/arch/parisc/kernel/smp.c b/arch/parisc/kernel/smp.c
index 4a23a97..12cc0193 100644
--- a/arch/parisc/kernel/smp.c
+++ b/arch/parisc/kernel/smp.c
@@ -608,7 +608,7 @@
}
-int __devinit __cpu_up(unsigned int cpu)
+int __cpuinit __cpu_up(unsigned int cpu)
{
if (cpu != 0 && cpu < parisc_max_cpus)
smp_boot_one_cpu(cpu);
diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index 9b28c23..0e8beca 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -468,7 +468,7 @@
return -ENOSYS;
}
-int __devinit __cpu_up(unsigned int cpu)
+int __cpuinit __cpu_up(unsigned int cpu)
{
int c;
diff --git a/arch/s390/mm/vmem.c b/arch/s390/mm/vmem.c
index 7f2944d..cd3d93e 100644
--- a/arch/s390/mm/vmem.c
+++ b/arch/s390/mm/vmem.c
@@ -61,7 +61,8 @@
if (map_start < map_end)
memmap_init_zone((unsigned long)(map_end - map_start),
- nid, zone, page_to_pfn(map_start));
+ nid, zone, page_to_pfn(map_start),
+ MEMMAP_EARLY);
}
}
diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c
index 0a49585..fc99f7b 100644
--- a/arch/sparc64/kernel/smp.c
+++ b/arch/sparc64/kernel/smp.c
@@ -1388,7 +1388,7 @@
{
}
-int __devinit __cpu_up(unsigned int cpu)
+int __cpuinit __cpu_up(unsigned int cpu)
{
int ret = smp_boot_one_cpu(cpu);
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
index 1639998..f4f000a 100644
--- a/drivers/acpi/Kconfig
+++ b/drivers/acpi/Kconfig
@@ -225,17 +225,6 @@
If you are not sure, say N here.
-config ACPI_IBM_BAY
- bool "Legacy Removable Bay Support"
- depends on ACPI_IBM
- depends on ACPI_BAY=n
- default n
- ---help---
- Allows the ibm_acpi driver to handle removable bays.
- This support is obsoleted by CONFIG_ACPI_BAY.
-
- If you are not sure, say N here.
-
config ACPI_TOSHIBA
tristate "Toshiba Laptop Extras"
depends on X86
diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c
index 279c4ba..766332e 100644
--- a/drivers/acpi/bus.c
+++ b/drivers/acpi/bus.c
@@ -561,6 +561,9 @@
case ACPI_IRQ_MODEL_IOSAPIC:
message = "IOSAPIC";
break;
+ case ACPI_IRQ_MODEL_PLATFORM:
+ message = "platform specific model";
+ break;
default:
printk(KERN_WARNING PREFIX "Unknown interrupt routing model\n");
return -ENODEV;
diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c
index 4144d5d..cbdf031 100644
--- a/drivers/acpi/ec.c
+++ b/drivers/acpi/ec.c
@@ -1016,8 +1016,8 @@
acpi_ec_mode = EC_POLL;
}
acpi_ec_driver.ops.add = acpi_ec_add;
- ACPI_DEBUG_PRINT((ACPI_DB_INFO, "EC %s mode.\n",
- intr ? "interrupt" : "polling"));
+ printk(KERN_NOTICE PREFIX "%s mode.\n",
+ intr ? "interrupt" : "polling");
return 1;
}
diff --git a/drivers/acpi/ibm_acpi.c b/drivers/acpi/ibm_acpi.c
index b72d13d..c6144ca 100644
--- a/drivers/acpi/ibm_acpi.c
+++ b/drivers/acpi/ibm_acpi.c
@@ -157,7 +157,6 @@
"\\_SB.PCI.ISA.SLCE", /* 570 */
); /* A21e,G4x,R30,R31,R32,R40,R40e,R50e */
#endif
-#ifdef CONFIG_ACPI_IBM_BAY
IBM_HANDLE(bay, root, "\\_SB.PCI.IDE.SECN.MAST", /* 570 */
"\\_SB.PCI0.IDE0.IDES.IDSM", /* 600e/x, 770e, 770x */
"\\_SB.PCI0.SATA.SCND.MSTR", /* T60, X60, Z60 */
@@ -175,7 +174,6 @@
IBM_HANDLE(bay2_ej, bay2, "_EJ3", /* 600e/x, 770e, A3x */
"_EJ0", /* 770x */
); /* all others */
-#endif
/* don't list other alternatives as we install a notify handler on the 570 */
IBM_HANDLE(pci, root, "\\_SB.PCI"); /* 570 */
@@ -1042,7 +1040,6 @@
return 0;
}
-#if defined(CONFIG_ACPI_IBM_DOCK) || defined(CONFIG_ACPI_IBM_BAY)
static int _sta(acpi_handle handle)
{
int status;
@@ -1052,7 +1049,7 @@
return status;
}
-#endif
+
#ifdef CONFIG_ACPI_IBM_DOCK
#define dock_docked() (_sta(dock_handle) & 1)
@@ -1118,7 +1115,6 @@
}
#endif
-#ifdef CONFIG_ACPI_IBM_BAY
static int bay_status_supported;
static int bay_status2_supported;
static int bay_eject_supported;
@@ -1194,7 +1190,6 @@
{
acpi_bus_generate_event(ibm->device, event, 0);
}
-#endif
static int cmos_read(char *p)
{
@@ -2354,7 +2349,6 @@
.type = ACPI_SYSTEM_NOTIFY,
},
#endif
-#ifdef CONFIG_ACPI_IBM_BAY
{
.name = "bay",
.init = bay_init,
@@ -2364,7 +2358,6 @@
.handle = &bay_handle,
.type = ACPI_SYSTEM_NOTIFY,
},
-#endif
{
.name = "cmos",
.read = cmos_read,
@@ -2650,9 +2643,7 @@
#ifdef CONFIG_ACPI_IBM_DOCK
IBM_PARAM(dock);
#endif
-#ifdef CONFIG_ACPI_IBM_BAY
IBM_PARAM(bay);
-#endif
IBM_PARAM(cmos);
IBM_PARAM(led);
IBM_PARAM(beep);
@@ -2735,14 +2726,12 @@
IBM_HANDLE_INIT(dock);
#endif
IBM_HANDLE_INIT(pci);
-#ifdef CONFIG_ACPI_IBM_BAY
IBM_HANDLE_INIT(bay);
if (bay_handle)
IBM_HANDLE_INIT(bay_ej);
IBM_HANDLE_INIT(bay2);
if (bay2_handle)
IBM_HANDLE_INIT(bay2_ej);
-#endif
IBM_HANDLE_INIT(beep);
IBM_HANDLE_INIT(ecrd);
IBM_HANDLE_INIT(ecwr);
diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c
index 25718fe..5f9496d 100644
--- a/drivers/acpi/processor_core.c
+++ b/drivers/acpi/processor_core.c
@@ -476,9 +476,6 @@
if (cpu_index == -1) {
if (ACPI_FAILURE
(acpi_processor_hotadd_init(pr->handle, &pr->id))) {
- printk(KERN_ERR PREFIX
- "Getting cpuindex for acpiid 0x%x\n",
- pr->acpi_id);
return -ENODEV;
}
}
diff --git a/drivers/acpi/processor_perflib.c b/drivers/acpi/processor_perflib.c
index 0e60382..5207f9e 100644
--- a/drivers/acpi/processor_perflib.c
+++ b/drivers/acpi/processor_perflib.c
@@ -736,10 +736,6 @@
}
err_ret:
- if (retval) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Error while parsing _PSD domain information. Assuming no coordination\n"));
- }
-
for_each_possible_cpu(i) {
pr = processors[i];
if (!pr || !pr->performance)
diff --git a/drivers/char/drm/i915_irq.c b/drivers/char/drm/i915_irq.c
index e2c4b3a..78c1ae2 100644
--- a/drivers/char/drm/i915_irq.c
+++ b/drivers/char/drm/i915_irq.c
@@ -500,7 +500,7 @@
if (!drm_get_drawable_info(dev, swap.drawable)) {
spin_unlock_irqrestore(&dev->drw_lock, irqflags);
- DRM_ERROR("Invalid drawable ID %d\n", swap.drawable);
+ DRM_DEBUG("Invalid drawable ID %d\n", swap.drawable);
return DRM_ERR(EINVAL);
}
diff --git a/drivers/char/hw_random/amd-rng.c b/drivers/char/hw_random/amd-rng.c
index 71e4e0f..556fd81 100644
--- a/drivers/char/hw_random/amd-rng.c
+++ b/drivers/char/hw_random/amd-rng.c
@@ -144,7 +144,7 @@
hwrng_unregister(&amd_rng);
}
-subsys_initcall(mod_init);
+module_init(mod_init);
module_exit(mod_exit);
MODULE_AUTHOR("The Linux Kernel team");
diff --git a/drivers/char/hw_random/geode-rng.c b/drivers/char/hw_random/geode-rng.c
index d37ced0..8e8658d 100644
--- a/drivers/char/hw_random/geode-rng.c
+++ b/drivers/char/hw_random/geode-rng.c
@@ -125,7 +125,7 @@
iounmap(mem);
}
-subsys_initcall(mod_init);
+module_init(mod_init);
module_exit(mod_exit);
MODULE_DESCRIPTION("H/W RNG driver for AMD Geode LX CPUs");
diff --git a/drivers/char/hw_random/intel-rng.c b/drivers/char/hw_random/intel-rng.c
index 8efbc9c..f22e78e 100644
--- a/drivers/char/hw_random/intel-rng.c
+++ b/drivers/char/hw_random/intel-rng.c
@@ -143,6 +143,11 @@
};
MODULE_DEVICE_TABLE(pci, pci_tbl);
+static __initdata int no_fwh_detect;
+module_param(no_fwh_detect, int, 0);
+MODULE_PARM_DESC(no_fwh_detect, "Skip FWH detection:\n"
+ " positive value - skip if FWH space locked read-only\n"
+ " negative value - skip always");
static inline u8 hwstatus_get(void __iomem *mem)
{
@@ -240,6 +245,11 @@
if (!dev)
goto out; /* Device not found. */
+ if (no_fwh_detect < 0) {
+ pci_dev_put(dev);
+ goto fwh_done;
+ }
+
/* Check for Intel 82802 */
if (dev->device < 0x2640) {
fwh_dec_en1_off = FWH_DEC_EN1_REG_OLD;
@@ -252,6 +262,23 @@
pci_read_config_byte(dev, fwh_dec_en1_off, &fwh_dec_en1_val);
pci_read_config_byte(dev, bios_cntl_off, &bios_cntl_val);
+ if ((bios_cntl_val &
+ (BIOS_CNTL_LOCK_ENABLE_MASK|BIOS_CNTL_WRITE_ENABLE_MASK))
+ == BIOS_CNTL_LOCK_ENABLE_MASK) {
+ static __initdata /*const*/ char warning[] =
+ KERN_WARNING PFX "Firmware space is locked read-only. If you can't or\n"
+ KERN_WARNING PFX "don't want to disable this in firmware setup, and if\n"
+ KERN_WARNING PFX "you are certain that your system has a functional\n"
+ KERN_WARNING PFX "RNG, try using the 'no_fwh_detect' option.\n";
+
+ pci_dev_put(dev);
+ if (no_fwh_detect)
+ goto fwh_done;
+ printk(warning);
+ err = -EBUSY;
+ goto out;
+ }
+
mem = ioremap_nocache(INTEL_FWH_ADDR, INTEL_FWH_ADDR_LEN);
if (mem == NULL) {
pci_dev_put(dev);
@@ -280,8 +307,7 @@
pci_write_config_byte(dev,
fwh_dec_en1_off,
fwh_dec_en1_val | FWH_F8_EN_MASK);
- if (!(bios_cntl_val &
- (BIOS_CNTL_LOCK_ENABLE_MASK|BIOS_CNTL_WRITE_ENABLE_MASK)))
+ if (!(bios_cntl_val & BIOS_CNTL_WRITE_ENABLE_MASK))
pci_write_config_byte(dev,
bios_cntl_off,
bios_cntl_val | BIOS_CNTL_WRITE_ENABLE_MASK);
@@ -315,6 +341,8 @@
goto out;
}
+fwh_done:
+
err = -ENOMEM;
mem = ioremap(INTEL_RNG_ADDR, INTEL_RNG_ADDR_LEN);
if (!mem)
@@ -350,7 +378,7 @@
iounmap(mem);
}
-subsys_initcall(mod_init);
+module_init(mod_init);
module_exit(mod_exit);
MODULE_DESCRIPTION("H/W RNG driver for Intel chipsets");
diff --git a/drivers/char/hw_random/ixp4xx-rng.c b/drivers/char/hw_random/ixp4xx-rng.c
index c9caff5..bab43ca 100644
--- a/drivers/char/hw_random/ixp4xx-rng.c
+++ b/drivers/char/hw_random/ixp4xx-rng.c
@@ -64,7 +64,7 @@
iounmap(rng_base);
}
-subsys_initcall(ixp4xx_rng_init);
+module_init(ixp4xx_rng_init);
module_exit(ixp4xx_rng_exit);
MODULE_AUTHOR("Deepak Saxena <dsaxena@plexity.net>");
diff --git a/drivers/char/hw_random/via-rng.c b/drivers/char/hw_random/via-rng.c
index 0e786b6..9ebf84d 100644
--- a/drivers/char/hw_random/via-rng.c
+++ b/drivers/char/hw_random/via-rng.c
@@ -176,7 +176,7 @@
hwrng_unregister(&via_rng);
}
-subsys_initcall(mod_init);
+module_init(mod_init);
module_exit(mod_exit);
MODULE_DESCRIPTION("H/W RNG driver for VIA chipsets");
diff --git a/drivers/char/mem.c b/drivers/char/mem.c
index 4f1813e..f5c160c 100644
--- a/drivers/char/mem.c
+++ b/drivers/char/mem.c
@@ -293,8 +293,8 @@
{
unsigned long pfn;
- /* Turn a pfn offset into an absolute pfn */
- pfn = PFN_DOWN(virt_to_phys((void *)PAGE_OFFSET)) + vma->vm_pgoff;
+ /* Turn a kernel-virtual address into a physical page frame */
+ pfn = __pa((u64)vma->vm_pgoff << PAGE_SHIFT) >> PAGE_SHIFT;
/*
* RED-PEN: on some architectures there is more mapped memory
diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index 18c2b3c..1e1a777 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -40,18 +40,10 @@
#define DRIVER_VERSION "v2.6"
#define DRIVER_AUTHOR "Andreas Gal, Vojtech Pavlik"
-#define DRIVER_DESC "USB HID core driver"
+#define DRIVER_DESC "HID core driver"
#define DRIVER_LICENSE "GPL"
/*
- * Module parameters.
- */
-
-static unsigned int hid_mousepoll_interval;
-module_param_named(mousepoll, hid_mousepoll_interval, uint, 0644);
-MODULE_PARM_DESC(mousepoll, "Polling interval of mice");
-
-/*
* Register a new report for a device.
*/
@@ -656,7 +648,7 @@
for (i = 0; i < HID_REPORT_TYPES; i++)
INIT_LIST_HEAD(&device->report_enum[i].report_list);
- if (!(device->rdesc = (__u8 *)kmalloc(size, GFP_KERNEL))) {
+ if (!(device->rdesc = kmalloc(size, GFP_KERNEL))) {
kfree(device->collection);
kfree(device);
return NULL;
diff --git a/drivers/hid/hid-input.c b/drivers/hid/hid-input.c
index 9986380..28689e3 100644
--- a/drivers/hid/hid-input.c
+++ b/drivers/hid/hid-input.c
@@ -68,6 +68,7 @@
#define map_led(c) do { usage->code = c; usage->type = EV_LED; bit = input->ledbit; max = LED_MAX; } while (0)
#define map_abs_clear(c) do { map_abs(c); clear_bit(c, bit); } while (0)
+#define map_rel_clear(c) do { map_rel(c); clear_bit(c, bit); } while (0)
#define map_key_clear(c) do { map_key(c); clear_bit(c, bit); } while (0)
#ifdef CONFIG_USB_HIDINPUT_POWERBOOK
@@ -292,7 +293,7 @@
}
}
- map_key(code);
+ map_key_clear(code);
break;
@@ -343,9 +344,9 @@
case HID_GD_RX: case HID_GD_RY: case HID_GD_RZ:
case HID_GD_SLIDER: case HID_GD_DIAL: case HID_GD_WHEEL:
if (field->flags & HID_MAIN_ITEM_RELATIVE)
- map_rel(usage->hid & 0xf);
+ map_rel_clear(usage->hid & 0xf);
else
- map_abs(usage->hid & 0xf);
+ map_abs_clear(usage->hid & 0xf);
break;
case HID_GD_HATSWITCH:
@@ -500,7 +501,7 @@
case 0x22f: map_key_clear(KEY_ZOOMRESET); break;
case 0x233: map_key_clear(KEY_SCROLLUP); break;
case 0x234: map_key_clear(KEY_SCROLLDOWN); break;
- case 0x238: map_rel(REL_HWHEEL); break;
+ case 0x238: map_rel_clear(REL_HWHEEL); break;
case 0x25f: map_key_clear(KEY_CANCEL); break;
case 0x279: map_key_clear(KEY_REDO); break;
diff --git a/drivers/kvm/svm.c b/drivers/kvm/svm.c
index ccc06b1..714f6a7 100644
--- a/drivers/kvm/svm.c
+++ b/drivers/kvm/svm.c
@@ -17,6 +17,7 @@
#include <linux/module.h>
#include <linux/vmalloc.h>
#include <linux/highmem.h>
+#include <linux/profile.h>
#include <asm/desc.h>
#include "kvm_svm.h"
@@ -1558,6 +1559,13 @@
reload_tss(vcpu);
+ /*
+ * Profile KVM exit RIPs:
+ */
+ if (unlikely(prof_on == KVM_PROFILING))
+ profile_hit(KVM_PROFILING,
+ (void *)(unsigned long)vcpu->svm->vmcb->save.rip);
+
stgi();
kvm_reput_irq(vcpu);
diff --git a/drivers/kvm/vmx.c b/drivers/kvm/vmx.c
index d4701cb..ce219e3 100644
--- a/drivers/kvm/vmx.c
+++ b/drivers/kvm/vmx.c
@@ -21,6 +21,7 @@
#include <linux/module.h>
#include <linux/mm.h>
#include <linux/highmem.h>
+#include <linux/profile.h>
#include <asm/io.h>
#include <asm/desc.h>
@@ -1859,6 +1860,12 @@
asm ("mov %0, %%ds; mov %0, %%es" : : "r"(__USER_DS));
#endif
+ /*
+ * Profile KVM exit RIPs:
+ */
+ if (unlikely(prof_on == KVM_PROFILING))
+ profile_hit(KVM_PROFILING, (void *)vmcs_readl(GUEST_RIP));
+
kvm_run->exit_type = 0;
if (fail) {
kvm_run->exit_type = KVM_EXIT_TYPE_FAIL_ENTRY;
diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index b30f74b..164b25d 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -775,6 +775,7 @@
struct bio_list bl;
struct page **behind_pages = NULL;
const int rw = bio_data_dir(bio);
+ const int do_sync = bio_sync(bio);
int do_barriers;
/*
@@ -835,7 +836,7 @@
read_bio->bi_sector = r1_bio->sector + mirror->rdev->data_offset;
read_bio->bi_bdev = mirror->rdev->bdev;
read_bio->bi_end_io = raid1_end_read_request;
- read_bio->bi_rw = READ;
+ read_bio->bi_rw = READ | do_sync;
read_bio->bi_private = r1_bio;
generic_make_request(read_bio);
@@ -906,7 +907,7 @@
mbio->bi_sector = r1_bio->sector + conf->mirrors[i].rdev->data_offset;
mbio->bi_bdev = conf->mirrors[i].rdev->bdev;
mbio->bi_end_io = raid1_end_write_request;
- mbio->bi_rw = WRITE | do_barriers;
+ mbio->bi_rw = WRITE | do_barriers | do_sync;
mbio->bi_private = r1_bio;
if (behind_pages) {
@@ -941,6 +942,8 @@
blk_plug_device(mddev->queue);
spin_unlock_irqrestore(&conf->device_lock, flags);
+ if (do_sync)
+ md_wakeup_thread(mddev->thread);
#if 0
while ((bio = bio_list_pop(&bl)) != NULL)
generic_make_request(bio);
@@ -1541,6 +1544,7 @@
* We already have a nr_pending reference on these rdevs.
*/
int i;
+ const int do_sync = bio_sync(r1_bio->master_bio);
clear_bit(R1BIO_BarrierRetry, &r1_bio->state);
clear_bit(R1BIO_Barrier, &r1_bio->state);
for (i=0; i < conf->raid_disks; i++)
@@ -1561,7 +1565,7 @@
conf->mirrors[i].rdev->data_offset;
bio->bi_bdev = conf->mirrors[i].rdev->bdev;
bio->bi_end_io = raid1_end_write_request;
- bio->bi_rw = WRITE;
+ bio->bi_rw = WRITE | do_sync;
bio->bi_private = r1_bio;
r1_bio->bios[i] = bio;
generic_make_request(bio);
@@ -1593,6 +1597,7 @@
(unsigned long long)r1_bio->sector);
raid_end_bio_io(r1_bio);
} else {
+ const int do_sync = bio_sync(r1_bio->master_bio);
r1_bio->bios[r1_bio->read_disk] =
mddev->ro ? IO_BLOCKED : NULL;
r1_bio->read_disk = disk;
@@ -1608,7 +1613,7 @@
bio->bi_sector = r1_bio->sector + rdev->data_offset;
bio->bi_bdev = rdev->bdev;
bio->bi_end_io = raid1_end_read_request;
- bio->bi_rw = READ;
+ bio->bi_rw = READ | do_sync;
bio->bi_private = r1_bio;
unplug = 1;
generic_make_request(bio);
diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
index f014191..a9401c0 100644
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -782,6 +782,7 @@
int i;
int chunk_sects = conf->chunk_mask + 1;
const int rw = bio_data_dir(bio);
+ const int do_sync = bio_sync(bio);
struct bio_list bl;
unsigned long flags;
@@ -863,7 +864,7 @@
mirror->rdev->data_offset;
read_bio->bi_bdev = mirror->rdev->bdev;
read_bio->bi_end_io = raid10_end_read_request;
- read_bio->bi_rw = READ;
+ read_bio->bi_rw = READ | do_sync;
read_bio->bi_private = r10_bio;
generic_make_request(read_bio);
@@ -909,7 +910,7 @@
conf->mirrors[d].rdev->data_offset;
mbio->bi_bdev = conf->mirrors[d].rdev->bdev;
mbio->bi_end_io = raid10_end_write_request;
- mbio->bi_rw = WRITE;
+ mbio->bi_rw = WRITE | do_sync;
mbio->bi_private = r10_bio;
atomic_inc(&r10_bio->remaining);
@@ -922,6 +923,9 @@
blk_plug_device(mddev->queue);
spin_unlock_irqrestore(&conf->device_lock, flags);
+ if (do_sync)
+ md_wakeup_thread(mddev->thread);
+
return 0;
}
@@ -1563,6 +1567,7 @@
(unsigned long long)r10_bio->sector);
raid_end_bio_io(r10_bio);
} else {
+ const int do_sync = bio_sync(r10_bio->master_bio);
rdev = conf->mirrors[mirror].rdev;
if (printk_ratelimit())
printk(KERN_ERR "raid10: %s: redirecting sector %llu to"
@@ -1574,7 +1579,7 @@
bio->bi_sector = r10_bio->devs[r10_bio->read_slot].addr
+ rdev->data_offset;
bio->bi_bdev = rdev->bdev;
- bio->bi_rw = READ;
+ bio->bi_rw = READ | do_sync;
bio->bi_private = r10_bio;
bio->bi_end_io = raid10_end_read_request;
unplug = 1;
diff --git a/drivers/net/pcmcia/3c574_cs.c b/drivers/net/pcmcia/3c574_cs.c
index 794cc61..448bf4a 100644
--- a/drivers/net/pcmcia/3c574_cs.c
+++ b/drivers/net/pcmcia/3c574_cs.c
@@ -281,7 +281,6 @@
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
link->conf.ConfigIndex = 1;
- link->conf.Present = PRESENT_OPTION;
/* The EL3-specific entries in the device structure. */
dev->hard_start_xmit = &el3_start_xmit;
diff --git a/drivers/net/pcmcia/3c589_cs.c b/drivers/net/pcmcia/3c589_cs.c
index 1e73ff7..342f406 100644
--- a/drivers/net/pcmcia/3c589_cs.c
+++ b/drivers/net/pcmcia/3c589_cs.c
@@ -195,7 +195,6 @@
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
link->conf.ConfigIndex = 1;
- link->conf.Present = PRESENT_OPTION;
/* The EL3-specific entries in the device structure. */
SET_MODULE_OWNER(dev);
diff --git a/drivers/net/pcmcia/com20020_cs.c b/drivers/net/pcmcia/com20020_cs.c
index 91f65e9..0d1c7a4 100644
--- a/drivers/net/pcmcia/com20020_cs.c
+++ b/drivers/net/pcmcia/com20020_cs.c
@@ -173,7 +173,6 @@
p_dev->irq.IRQInfo1 = IRQ_LEVEL_ID;
p_dev->conf.Attributes = CONF_ENABLE_IRQ;
p_dev->conf.IntType = INT_MEMORY_AND_IO;
- p_dev->conf.Present = PRESENT_OPTION;
p_dev->irq.Instance = info->dev = dev;
p_dev->priv = info;
diff --git a/drivers/net/pcmcia/xirc2ps_cs.c b/drivers/net/pcmcia/xirc2ps_cs.c
index 8478dca..5879e7c 100644
--- a/drivers/net/pcmcia/xirc2ps_cs.c
+++ b/drivers/net/pcmcia/xirc2ps_cs.c
@@ -576,7 +576,6 @@
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
link->conf.ConfigIndex = 1;
- link->conf.Present = PRESENT_OPTION;
link->irq.Handler = xirc2ps_interrupt;
link->irq.Instance = dev;
diff --git a/drivers/net/wireless/netwave_cs.c b/drivers/net/wireless/netwave_cs.c
index 644b474..a009ab5 100644
--- a/drivers/net/wireless/netwave_cs.c
+++ b/drivers/net/wireless/netwave_cs.c
@@ -406,7 +406,6 @@
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
link->conf.ConfigIndex = 1;
- link->conf.Present = PRESENT_OPTION;
/* Netwave private struct init. link/dev/node already taken care of,
* other stuff zero'd - Jean II */
diff --git a/drivers/net/wireless/ray_cs.c b/drivers/net/wireless/ray_cs.c
index 88e10c9..47b2ccb 100644
--- a/drivers/net/wireless/ray_cs.c
+++ b/drivers/net/wireless/ray_cs.c
@@ -331,7 +331,6 @@
p_dev->conf.Attributes = CONF_ENABLE_IRQ;
p_dev->conf.IntType = INT_MEMORY_AND_IO;
p_dev->conf.ConfigIndex = 1;
- p_dev->conf.Present = PRESENT_OPTION;
p_dev->priv = dev;
p_dev->irq.Instance = dev;
diff --git a/drivers/net/wireless/wl3501_cs.c b/drivers/net/wireless/wl3501_cs.c
index 583e0d6..c250f08 100644
--- a/drivers/net/wireless/wl3501_cs.c
+++ b/drivers/net/wireless/wl3501_cs.c
@@ -1928,7 +1928,6 @@
p_dev->conf.Attributes = CONF_ENABLE_IRQ;
p_dev->conf.IntType = INT_MEMORY_AND_IO;
p_dev->conf.ConfigIndex = 1;
- p_dev->conf.Present = PRESENT_OPTION;
dev = alloc_etherdev(sizeof(struct wl3501_card));
if (!dev)
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 6bfb942..206c834 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -254,7 +254,8 @@
if ((cap & mask) == ht_cap)
return pos;
- pos = __pci_find_next_cap_ttl(dev->bus, dev->devfn, pos,
+ pos = __pci_find_next_cap_ttl(dev->bus, dev->devfn,
+ pos + PCI_CAP_LIST_NEXT,
PCI_CAP_ID_HT, &ttl);
}
diff --git a/drivers/rtc/rtc-sh.c b/drivers/rtc/rtc-sh.c
index 72ba1a7..e9e0934 100644
--- a/drivers/rtc/rtc-sh.c
+++ b/drivers/rtc/rtc-sh.c
@@ -264,8 +264,6 @@
unsigned int tmp;
tmp = readb(rtc->regbase + RCR1);
- seq_printf(seq, "alarm_IRQ\t: %s\n",
- (tmp & RCR1_AIE) ? "yes" : "no");
seq_printf(seq, "carry_IRQ\t: %s\n",
(tmp & RCR1_CIE) ? "yes" : "no");
@@ -428,6 +426,8 @@
tm->tm_mon -= 1; /* RTC is 1-12, tm_mon is 0-11 */
tm->tm_year = 0xffff;
+ wkalrm->enabled = (readb(rtc->regbase + RCR1) & RCR1_AIE) ? 1 : 0;
+
spin_unlock_irq(&rtc->lock);
return 0;
diff --git a/drivers/scsi/pcmcia/nsp_cs.c b/drivers/scsi/pcmcia/nsp_cs.c
index d72df5d..e16fe36 100644
--- a/drivers/scsi/pcmcia/nsp_cs.c
+++ b/drivers/scsi/pcmcia/nsp_cs.c
@@ -1629,7 +1629,6 @@
/* General socket configuration */
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
- link->conf.Present = PRESENT_OPTION;
ret = nsp_cs_config(link);
diff --git a/drivers/scsi/pcmcia/sym53c500_cs.c b/drivers/scsi/pcmcia/sym53c500_cs.c
index fb7acea..9fb0ea5 100644
--- a/drivers/scsi/pcmcia/sym53c500_cs.c
+++ b/drivers/scsi/pcmcia/sym53c500_cs.c
@@ -895,7 +895,6 @@
link->irq.IRQInfo1 = IRQ_LEVEL_ID;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
- link->conf.Present = PRESENT_OPTION;
return SYM53C500_config(link);
} /* SYM53C500_attach */
diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig
index c8999ae..2f4d303 100644
--- a/drivers/usb/serial/Kconfig
+++ b/drivers/usb/serial/Kconfig
@@ -170,7 +170,7 @@
config USB_SERIAL_FUNSOFT
tristate "USB Fundamental Software Dongle Driver"
- depends on USB_SERIAL && !(SPARC || SPARC64)
+ depends on USB_SERIAL
---help---
Say Y here if you want to use the Fundamental Software dongle.
diff --git a/drivers/usb/serial/funsoft.c b/drivers/usb/serial/funsoft.c
index d3be921..31501c9 100644
--- a/drivers/usb/serial/funsoft.c
+++ b/drivers/usb/serial/funsoft.c
@@ -32,7 +32,7 @@
dbg("%s - port %d, cmd 0x%04x", __FUNCTION__, port->number, cmd);
if (cmd == TCSETSF) {
- if (user_termios_to_kernel_termios(&t, (void __user *)arg))
+ if (user_termios_to_kernel_termios(&t, (struct termios __user *)arg))
return -EFAULT;
dbg("%s - iflag:%x oflag:%x cflag:%x lflag:%x", __FUNCTION__,
diff --git a/fs/block_dev.c b/fs/block_dev.c
index 1715d6b..8b18e43 100644
--- a/fs/block_dev.c
+++ b/fs/block_dev.c
@@ -411,7 +411,7 @@
{
memset(bdev, 0, sizeof(*bdev));
mutex_init(&bdev->bd_mutex);
- mutex_init(&bdev->bd_mount_mutex);
+ sema_init(&bdev->bd_mount_sem, 1);
INIT_LIST_HEAD(&bdev->bd_inodes);
INIT_LIST_HEAD(&bdev->bd_list);
#ifdef CONFIG_SYSFS
diff --git a/fs/buffer.c b/fs/buffer.c
index 263f88e..3b11607 100644
--- a/fs/buffer.c
+++ b/fs/buffer.c
@@ -180,7 +180,7 @@
* freeze_bdev -- lock a filesystem and force it into a consistent state
* @bdev: blockdevice to lock
*
- * This takes the block device bd_mount_mutex to make sure no new mounts
+ * This takes the block device bd_mount_sem to make sure no new mounts
* happen on bdev until thaw_bdev() is called.
* If a superblock is found on this device, we take the s_umount semaphore
* on it to make sure nobody unmounts until the snapshot creation is done.
@@ -189,7 +189,7 @@
{
struct super_block *sb;
- mutex_lock(&bdev->bd_mount_mutex);
+ down(&bdev->bd_mount_sem);
sb = get_super(bdev);
if (sb && !(sb->s_flags & MS_RDONLY)) {
sb->s_frozen = SB_FREEZE_WRITE;
@@ -231,7 +231,7 @@
drop_super(sb);
}
- mutex_unlock(&bdev->bd_mount_mutex);
+ up(&bdev->bd_mount_sem);
}
EXPORT_SYMBOL(thaw_bdev);
diff --git a/fs/gfs2/ops_fstype.c b/fs/gfs2/ops_fstype.c
index d14e139..ee80b8a 100644
--- a/fs/gfs2/ops_fstype.c
+++ b/fs/gfs2/ops_fstype.c
@@ -867,9 +867,9 @@
error = -EBUSY;
goto error;
}
- mutex_lock(&sb->s_bdev->bd_mount_mutex);
+ down(&sb->s_bdev->bd_mount_sem);
new = sget(fs_type, test_bdev_super, set_bdev_super, sb->s_bdev);
- mutex_unlock(&sb->s_bdev->bd_mount_mutex);
+ up(&sb->s_bdev->bd_mount_sem);
if (IS_ERR(new)) {
error = PTR_ERR(new);
goto error;
diff --git a/fs/nfs/file.c b/fs/nfs/file.c
index 0dd6be3..fab20d0 100644
--- a/fs/nfs/file.c
+++ b/fs/nfs/file.c
@@ -315,14 +315,13 @@
static int nfs_release_page(struct page *page, gfp_t gfp)
{
- /*
- * Avoid deadlock on nfs_wait_on_request().
- */
- if (!(gfp & __GFP_FS))
- return 0;
- /* Hack... Force nfs_wb_page() to write out the page */
- SetPageDirty(page);
- return !nfs_wb_page(page->mapping->host, page);
+ /* If PagePrivate() is set, then the page is not freeable */
+ return 0;
+}
+
+static int nfs_launder_page(struct page *page)
+{
+ return nfs_wb_page(page->mapping->host, page);
}
const struct address_space_operations nfs_file_aops = {
@@ -338,6 +337,7 @@
#ifdef CONFIG_NFS_DIRECTIO
.direct_IO = nfs_direct_IO,
#endif
+ .launder_page = nfs_launder_page,
};
static ssize_t nfs_file_write(struct kiocb *iocb, const struct iovec *iov,
diff --git a/fs/super.c b/fs/super.c
index f961e03..3e7458c 100644
--- a/fs/super.c
+++ b/fs/super.c
@@ -753,9 +753,9 @@
* will protect the lockfs code from trying to start a snapshot
* while we are mounting
*/
- mutex_lock(&bdev->bd_mount_mutex);
+ down(&bdev->bd_mount_sem);
s = sget(fs_type, test_bdev_super, set_bdev_super, bdev);
- mutex_unlock(&bdev->bd_mount_mutex);
+ up(&bdev->bd_mount_sem);
if (IS_ERR(s))
goto error_s;
diff --git a/include/asm-alpha/posix_types.h b/include/asm-alpha/posix_types.h
index c78c04a..db16741 100644
--- a/include/asm-alpha/posix_types.h
+++ b/include/asm-alpha/posix_types.h
@@ -49,7 +49,7 @@
#define __FD_CLR(d, set) ((set)->fds_bits[__FDELT(d)] &= ~__FDMASK(d))
#define __FD_ISSET(d, set) (((set)->fds_bits[__FDELT(d)] & __FDMASK(d)) != 0)
#define __FD_ZERO(set) \
- ((void) memset ((__ptr_t) (set), 0, sizeof (__kernel_fd_set)))
+ ((void) memset ((void *) (set), 0, sizeof (__kernel_fd_set)))
#else /* __GNUC__ */
diff --git a/include/asm-ia64/posix_types.h b/include/asm-ia64/posix_types.h
index adb6227..1788556 100644
--- a/include/asm-ia64/posix_types.h
+++ b/include/asm-ia64/posix_types.h
@@ -54,7 +54,7 @@
#define __FD_CLR(d, set) ((set)->fds_bits[__FDELT(d)] &= ~__FDMASK(d))
#define __FD_ISSET(d, set) (((set)->fds_bits[__FDELT(d)] & __FDMASK(d)) != 0)
#define __FD_ZERO(set) \
- ((void) memset ((__ptr_t) (set), 0, sizeof (__kernel_fd_set)))
+ ((void) memset ((void *) (set), 0, sizeof (__kernel_fd_set)))
# else /* !__GNUC__ */
diff --git a/include/asm-powerpc/posix_types.h b/include/asm-powerpc/posix_types.h
index c639107..2f2288f 100644
--- a/include/asm-powerpc/posix_types.h
+++ b/include/asm-powerpc/posix_types.h
@@ -60,7 +60,7 @@
#define __FD_CLR(d, set) ((set)->fds_bits[__FDELT(d)] &= ~__FDMASK(d))
#define __FD_ISSET(d, set) (((set)->fds_bits[__FDELT(d)] & __FDMASK(d)) != 0)
#define __FD_ZERO(set) \
- ((void) memset ((__ptr_t) (set), 0, sizeof (__kernel_fd_set)))
+ ((void) memset ((void *) (set), 0, sizeof (__kernel_fd_set)))
#else /* __GNUC__ */
diff --git a/include/asm-s390/posix_types.h b/include/asm-s390/posix_types.h
index b94c988..397d93f 100644
--- a/include/asm-s390/posix_types.h
+++ b/include/asm-s390/posix_types.h
@@ -104,7 +104,7 @@
#undef __FD_ZERO
#define __FD_ZERO(fdsetp) \
- ((void) memset ((__ptr_t) (fdsetp), 0, sizeof (__kernel_fd_set)))
+ ((void) memset ((void *) (fdsetp), 0, sizeof (__kernel_fd_set)))
#endif /* __KERNEL__ */
diff --git a/include/asm-xtensa/posix_types.h b/include/asm-xtensa/posix_types.h
index 3470b44..4ad77dd 100644
--- a/include/asm-xtensa/posix_types.h
+++ b/include/asm-xtensa/posix_types.h
@@ -60,7 +60,7 @@
#define __FD_CLR(d, set) ((set)->fds_bits[__FDELT(d)] &= ~__FDMASK(d))
#define __FD_ISSET(d, set) ((set)->fds_bits[__FDELT(d)] & __FDMASK(d))
#define __FD_ZERO(set) \
- ((void) memset ((__ptr_t) (set), 0, sizeof (__kernel_fd_set)))
+ ((void) memset ((void *) (set), 0, sizeof (__kernel_fd_set)))
#else /* __GNUC__ */
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index 2b0c955..91f1f23 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -47,6 +47,7 @@
ACPI_IRQ_MODEL_PIC = 0,
ACPI_IRQ_MODEL_IOAPIC,
ACPI_IRQ_MODEL_IOSAPIC,
+ ACPI_IRQ_MODEL_PLATFORM,
ACPI_IRQ_MODEL_COUNT
};
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 186da81..1410e53 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -426,6 +426,7 @@
/* migrate the contents of a page to the specified target */
int (*migratepage) (struct address_space *,
struct page *, struct page *);
+ int (*launder_page) (struct page *);
};
struct backing_dev_info;
@@ -458,7 +459,7 @@
struct inode * bd_inode; /* will die */
int bd_openers;
struct mutex bd_mutex; /* open/close mutex */
- struct mutex bd_mount_mutex; /* mount mutex */
+ struct semaphore bd_mount_sem;
struct list_head bd_inodes;
void * bd_holder;
int bd_holders;
diff --git a/include/linux/mm.h b/include/linux/mm.h
index a17b147..7691223 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -978,7 +978,8 @@
#endif /* CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID */
#endif /* CONFIG_ARCH_POPULATES_NODE_MAP */
extern void set_dma_reserve(unsigned long new_dma_reserve);
-extern void memmap_init_zone(unsigned long, int, unsigned long, unsigned long);
+extern void memmap_init_zone(unsigned long, int, unsigned long,
+ unsigned long, enum memmap_context);
extern void setup_per_zone_pages_min(void);
extern void mem_init(void);
extern void show_mem(void);
diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h
index e339a73..b262f47 100644
--- a/include/linux/mmzone.h
+++ b/include/linux/mmzone.h
@@ -450,9 +450,13 @@
void wakeup_kswapd(struct zone *zone, int order);
int zone_watermark_ok(struct zone *z, int order, unsigned long mark,
int classzone_idx, int alloc_flags);
-
+enum memmap_context {
+ MEMMAP_EARLY,
+ MEMMAP_HOTPLUG,
+};
extern int init_currently_empty_zone(struct zone *zone, unsigned long start_pfn,
- unsigned long size);
+ unsigned long size,
+ enum memmap_context context);
#ifdef CONFIG_HAVE_MEMORY_PRESENT
void memory_present(int nid, unsigned long start, unsigned long end);
diff --git a/include/linux/profile.h b/include/linux/profile.h
index 5670b34..eec48f5 100644
--- a/include/linux/profile.h
+++ b/include/linux/profile.h
@@ -15,6 +15,7 @@
#define CPU_PROFILING 1
#define SCHED_PROFILING 2
#define SLEEP_PROFILING 3
+#define KVM_PROFILING 4
struct proc_dir_entry;
struct pt_regs;
diff --git a/init/version.c b/init/version.c
index 55abe76..6c01ec1 100644
--- a/init/version.c
+++ b/init/version.c
@@ -34,8 +34,8 @@
};
EXPORT_SYMBOL_GPL(init_uts_ns);
-/* FIXED STRING! Don't touch! */
-const char __init linux_banner[] =
+/* FIXED STRINGS! Don't touch! */
+const char linux_banner[] =
"Linux version " UTS_RELEASE " (" LINUX_COMPILE_BY "@"
LINUX_COMPILE_HOST ") (" LINUX_COMPILER ") " UTS_VERSION "\n";
diff --git a/kernel/cpu.c b/kernel/cpu.c
index 241064a..7406fe6 100644
--- a/kernel/cpu.c
+++ b/kernel/cpu.c
@@ -204,7 +204,7 @@
#endif /*CONFIG_HOTPLUG_CPU*/
/* Requires cpu_add_remove_lock to be held */
-static int __devinit _cpu_up(unsigned int cpu)
+static int __cpuinit _cpu_up(unsigned int cpu)
{
int ret;
void *hcpu = (void *)(long)cpu;
@@ -239,7 +239,7 @@
return ret;
}
-int __devinit cpu_up(unsigned int cpu)
+int __cpuinit cpu_up(unsigned int cpu)
{
int err = 0;
diff --git a/kernel/profile.c b/kernel/profile.c
index 11550b2..a6574a1 100644
--- a/kernel/profile.c
+++ b/kernel/profile.c
@@ -40,7 +40,10 @@
static atomic_t *prof_buffer;
static unsigned long prof_len, prof_shift;
+
int prof_on __read_mostly;
+EXPORT_SYMBOL_GPL(prof_on);
+
static cpumask_t prof_cpu_mask = CPU_MASK_ALL;
#ifdef CONFIG_SMP
static DEFINE_PER_CPU(struct profile_hit *[2], cpu_profile_hits);
@@ -52,6 +55,7 @@
{
static char __initdata schedstr[] = "schedule";
static char __initdata sleepstr[] = "sleep";
+ static char __initdata kvmstr[] = "kvm";
int par;
if (!strncmp(str, sleepstr, strlen(sleepstr))) {
@@ -72,6 +76,15 @@
printk(KERN_INFO
"kernel schedule profiling enabled (shift: %ld)\n",
prof_shift);
+ } else if (!strncmp(str, kvmstr, strlen(kvmstr))) {
+ prof_on = KVM_PROFILING;
+ if (str[strlen(kvmstr)] == ',')
+ str += strlen(kvmstr) + 1;
+ if (get_option(&str, &par))
+ prof_shift = par;
+ printk(KERN_INFO
+ "kernel KVM profiling enabled (shift: %ld)\n",
+ prof_shift);
} else if (get_option(&str, &par)) {
prof_shift = par;
prof_on = CPU_PROFILING;
@@ -318,6 +331,7 @@
local_irq_restore(flags);
put_cpu();
}
+EXPORT_SYMBOL_GPL(profile_hits);
static int __devinit profile_cpu_callback(struct notifier_block *info,
unsigned long action, void *__cpu)
diff --git a/kernel/sched.c b/kernel/sched.c
index 3df33da..cca93cc 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -6865,7 +6865,7 @@
lock_cpu_hotplug();
arch_init_sched_domains(&cpu_online_map);
- cpus_andnot(non_isolated_cpus, cpu_online_map, cpu_isolated_map);
+ cpus_andnot(non_isolated_cpus, cpu_possible_map, cpu_isolated_map);
if (cpus_empty(non_isolated_cpus))
cpu_set(smp_processor_id(), non_isolated_cpus);
unlock_cpu_hotplug();
diff --git a/mm/bounce.c b/mm/bounce.c
index e4b62d2..643efbe 100644
--- a/mm/bounce.c
+++ b/mm/bounce.c
@@ -237,6 +237,8 @@
if (!bio)
return;
+ blk_add_trace_bio(q, *bio_orig, BLK_TA_BOUNCE);
+
/*
* at least one page was bounced, fill in possible non-highmem
* pages
@@ -291,8 +293,6 @@
pool = isa_page_pool;
}
- blk_add_trace_bio(q, *bio_orig, BLK_TA_BOUNCE);
-
/*
* slow path
*/
diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c
index 0c055a09..8427912 100644
--- a/mm/memory_hotplug.c
+++ b/mm/memory_hotplug.c
@@ -67,11 +67,13 @@
zone_type = zone - pgdat->node_zones;
if (!populated_zone(zone)) {
int ret = 0;
- ret = init_currently_empty_zone(zone, phys_start_pfn, nr_pages);
+ ret = init_currently_empty_zone(zone, phys_start_pfn,
+ nr_pages, MEMMAP_HOTPLUG);
if (ret < 0)
return ret;
}
- memmap_init_zone(nr_pages, nid, zone_type, phys_start_pfn);
+ memmap_init_zone(nr_pages, nid, zone_type,
+ phys_start_pfn, MEMMAP_HOTPLUG);
return 0;
}
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index a49f96b..fc5b544 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -1956,17 +1956,24 @@
* done. Non-atomic initialization, single-pass.
*/
void __meminit memmap_init_zone(unsigned long size, int nid, unsigned long zone,
- unsigned long start_pfn)
+ unsigned long start_pfn, enum memmap_context context)
{
struct page *page;
unsigned long end_pfn = start_pfn + size;
unsigned long pfn;
for (pfn = start_pfn; pfn < end_pfn; pfn++) {
- if (!early_pfn_valid(pfn))
- continue;
- if (!early_pfn_in_nid(pfn, nid))
- continue;
+ /*
+ * There can be holes in boot-time mem_map[]s
+ * handed to this function. They do not
+ * exist on hotplugged memory.
+ */
+ if (context == MEMMAP_EARLY) {
+ if (!early_pfn_valid(pfn))
+ continue;
+ if (!early_pfn_in_nid(pfn, nid))
+ continue;
+ }
page = pfn_to_page(pfn);
set_page_links(page, zone, nid, pfn);
init_page_count(page);
@@ -1993,7 +2000,7 @@
#ifndef __HAVE_ARCH_MEMMAP_INIT
#define memmap_init(size, nid, zone, start_pfn) \
- memmap_init_zone((size), (nid), (zone), (start_pfn))
+ memmap_init_zone((size), (nid), (zone), (start_pfn), MEMMAP_EARLY)
#endif
static int __cpuinit zone_batchsize(struct zone *zone)
@@ -2239,7 +2246,8 @@
__meminit int init_currently_empty_zone(struct zone *zone,
unsigned long zone_start_pfn,
- unsigned long size)
+ unsigned long size,
+ enum memmap_context context)
{
struct pglist_data *pgdat = zone->zone_pgdat;
int ret;
@@ -2683,7 +2691,8 @@
if (!size)
continue;
- ret = init_currently_empty_zone(zone, zone_start_pfn, size);
+ ret = init_currently_empty_zone(zone, zone_start_pfn,
+ size, MEMMAP_EARLY);
BUG_ON(ret);
zone_start_pfn += size;
}
diff --git a/mm/truncate.c b/mm/truncate.c
index ecdfdcc..6c79ca4 100644
--- a/mm/truncate.c
+++ b/mm/truncate.c
@@ -341,6 +341,15 @@
return 0;
}
+static int do_launder_page(struct address_space *mapping, struct page *page)
+{
+ if (!PageDirty(page))
+ return 0;
+ if (page->mapping != mapping || mapping->a_ops->launder_page == NULL)
+ return 0;
+ return mapping->a_ops->launder_page(page);
+}
+
/**
* invalidate_inode_pages2_range - remove range of pages from an address_space
* @mapping: the address_space
@@ -405,7 +414,8 @@
PAGE_CACHE_SIZE, 0);
}
}
- if (!invalidate_complete_page2(mapping, page))
+ ret = do_launder_page(mapping, page);
+ if (ret == 0 && !invalidate_complete_page2(mapping, page))
ret = -EIO;
unlock_page(page);
}
diff --git a/scripts/kconfig/qconf.cc b/scripts/kconfig/qconf.cc
index a8ffc32..c0ae0a7 100644
--- a/scripts/kconfig/qconf.cc
+++ b/scripts/kconfig/qconf.cc
@@ -917,7 +917,7 @@
}
ConfigInfoView::ConfigInfoView(QWidget* parent, const char *name)
- : Parent(parent, name), menu(0)
+ : Parent(parent, name), menu(0), sym(0)
{
if (name) {
configSettings->beginGroup(name);
@@ -925,8 +925,6 @@
configSettings->endGroup();
connect(configApp, SIGNAL(aboutToQuit()), SLOT(saveSettings()));
}
-
- has_dbg_info = 0;
}
void ConfigInfoView::saveSettings(void)
@@ -955,13 +953,11 @@
if (menu == m)
return;
menu = m;
- if (!menu) {
- has_dbg_info = 0;
+ sym = NULL;
+ if (!menu)
clear();
- } else {
- has_dbg_info = 1;
+ else
menuInfo();
- }
}
void ConfigInfoView::setSource(const QString& name)
@@ -996,9 +992,6 @@
{
QString str;
- if (!has_dbg_info)
- return;
-
str += "<big>Symbol: <b>";
str += print_filter(sym->name);
str += "</b></big><br><br>value: ";
diff --git a/scripts/kconfig/qconf.h b/scripts/kconfig/qconf.h
index a397edb..6fc1c5f 100644
--- a/scripts/kconfig/qconf.h
+++ b/scripts/kconfig/qconf.h
@@ -273,8 +273,6 @@
struct symbol *sym;
struct menu *menu;
bool _showDebug;
-
- int has_dbg_info;
};
class ConfigSearchWindow : public QDialog {