ALSA: ua101: add Edirol UA-1000 support
Add support for the Edirol UA-1000 to the UA-101 driver.
Both devices behave the same, so we just have to shuffle around some
interface numbers and name strings.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
diff --git a/sound/usb/ua101.c b/sound/usb/ua101.c
index 4f4ccdf..047dc1c 100644
--- a/sound/usb/ua101.c
+++ b/sound/usb/ua101.c
@@ -1,5 +1,5 @@
/*
- * Edirol UA-101 driver
+ * Edirol UA-101/UA-1000 driver
* Copyright (c) Clemens Ladisch <clemens@ladisch.de>
*
* This driver is free software: you can redistribute it and/or modify
@@ -25,10 +25,10 @@
#include <sound/pcm_params.h>
#include "usbaudio.h"
-MODULE_DESCRIPTION("Edirol UA-101 driver");
+MODULE_DESCRIPTION("Edirol UA-101/1000 driver");
MODULE_AUTHOR("Clemens Ladisch <clemens@ladisch.de>");
MODULE_LICENSE("GPL v2");
-MODULE_SUPPORTED_DEVICE("{{Edirol,UA-101}}");
+MODULE_SUPPORTED_DEVICE("{{Edirol,UA-101},{Edirol,UA-1000}}");
/* I use my UA-1A for testing because I don't have a UA-101 ... */
#define UA1A_HACK
@@ -1200,13 +1200,30 @@
.type = QUIRK_MIDI_FIXED_ENDPOINT,
.data = &midi_ep
};
+ static const int intf_numbers[2][3] = {
+ { /* UA-101 */
+ [INTF_PLAYBACK] = 0,
+ [INTF_CAPTURE] = 1,
+ [INTF_MIDI] = 2,
+ },
+ { /* UA-1000 */
+ [INTF_CAPTURE] = 1,
+ [INTF_PLAYBACK] = 2,
+ [INTF_MIDI] = 3,
+ },
+ };
struct snd_card *card;
struct ua101 *ua;
unsigned int card_index, i;
+ int is_ua1000;
+ const char *name;
char usb_path[32];
int err;
- if (interface->altsetting->desc.bInterfaceNumber != 0)
+ is_ua1000 = usb_id->idProduct == 0x0044;
+
+ if (interface->altsetting->desc.bInterfaceNumber !=
+ intf_numbers[is_ua1000][0])
return -ENODEV;
mutex_lock(&devices_mutex);
@@ -1250,9 +1267,11 @@
#endif
ua->intf[0] = interface;
for (i = 1; i < ARRAY_SIZE(ua->intf); ++i) {
- ua->intf[i] = usb_ifnum_to_if(ua->dev, i);
+ ua->intf[i] = usb_ifnum_to_if(ua->dev,
+ intf_numbers[is_ua1000][i]);
if (!ua->intf[i]) {
- dev_err(&ua->dev->dev, "interface %u not found\n", i);
+ dev_err(&ua->dev->dev, "interface %u not found\n",
+ intf_numbers[is_ua1000][i]);
err = -ENXIO;
goto probe_error;
}
@@ -1292,11 +1311,12 @@
}
#endif
+ name = usb_id->idProduct == 0x0044 ? "UA-1000" : "UA-101";
strcpy(card->driver, "UA-101");
- strcpy(card->shortname, "UA-101");
+ strcpy(card->shortname, name);
usb_make_path(ua->dev, usb_path, sizeof(usb_path));
snprintf(ua->card->longname, sizeof(ua->card->longname),
- "EDIROL UA-101 (serial %s), %u Hz at %s, %s speed",
+ "EDIROL %s (serial %s), %u Hz at %s, %s speed", name,
ua->dev->serial ? ua->dev->serial : "?", ua->rate, usb_path,
ua->dev->speed == USB_SPEED_HIGH ? "high" : "full");
@@ -1314,11 +1334,11 @@
if (err < 0)
goto probe_error;
- err = snd_pcm_new(card, "UA-101", 0, 1, 1, &ua->pcm);
+ err = snd_pcm_new(card, name, 0, 1, 1, &ua->pcm);
if (err < 0)
goto probe_error;
ua->pcm->private_data = ua;
- strcpy(ua->pcm->name, "UA-101");
+ strcpy(ua->pcm->name, name);
snd_pcm_set_ops(ua->pcm, SNDRV_PCM_STREAM_PLAYBACK, &playback_pcm_ops);
snd_pcm_set_ops(ua->pcm, SNDRV_PCM_STREAM_CAPTURE, &capture_pcm_ops);
@@ -1389,8 +1409,9 @@
#ifdef UA1A_HACK
{ USB_DEVICE(0x0582, 0x0018) },
#endif
- { USB_DEVICE(0x0582, 0x007d) },
- { USB_DEVICE(0x0582, 0x008d) },
+ { USB_DEVICE(0x0582, 0x0044) }, /* UA-1000 high speed */
+ { USB_DEVICE(0x0582, 0x007d) }, /* UA-101 high speed */
+ { USB_DEVICE(0x0582, 0x008d) }, /* UA-101 full speed */
{ }
};
MODULE_DEVICE_TABLE(usb, ua101_ids);