powerpc/83xx: Fix TSEC0 workability on MPC8313E-RDB boards
TSEC0 is connected to Vitesse 7385 5-port switch. The switch
isn't connected to any mdio bus, the link to the switch is fixed
to Full-duplex 1000 Mb/s (no pause).
This patch fixes following failure during bootup:
mdio@24520:01 not found
eth0: Could not attach to PHY
IP-Config: Failed to open eth0
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
diff --git a/arch/powerpc/boot/dts/mpc8313erdb.dts b/arch/powerpc/boot/dts/mpc8313erdb.dts
index 3f84cd0..3ebf7ec 100644
--- a/arch/powerpc/boot/dts/mpc8313erdb.dts
+++ b/arch/powerpc/boot/dts/mpc8313erdb.dts
@@ -191,7 +191,8 @@
interrupts = <37 0x8 36 0x8 35 0x8>;
interrupt-parent = <&ipic>;
tbi-handle = < &tbi0 >;
- phy-handle = < &phy1 >;
+ /* Vitesse 7385 isn't on the MDIO bus */
+ fixed-link = <1 1 1000 0 0>;
fsl,magic-packet;
mdio@24520 {
@@ -199,12 +200,6 @@
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
reg = <0x24520 0x20>;
- phy1: ethernet-phy@1 {
- interrupt-parent = <&ipic>;
- interrupts = <19 0x8>;
- reg = <0x1>;
- device_type = "ethernet-phy";
- };
phy4: ethernet-phy@4 {
interrupt-parent = <&ipic>;
interrupts = <20 0x8>;