[SCSI] aacraid: Add new code for PMC-Sierra's SRC based controller family
Added new hardware device 0x28b interface for PMC-Sierra's SRC based
controller family.
- new src.c file for 0x28b specific functions
- new XPORT header required
- sync. command interface: doorbell bits shifted (SRC_ODR_SHIFT, SRC_IDR_SHIFT)
- async. Interface: different inbound queue handling, no outbound I2O
queue available, using doorbell ("PmDoorBellResponseSent") and
response buffer on the host ("host_rrq") for status
- changed AIF (adapter initiated FIBs) interface: "DoorBellAifPending"
bit to inform about pending AIF, "AifRequest" command to read AIF,
"NoMoreAifDataAvailable" to mark the end of the AIFs
Signed-off-by: Mahesh Rajashekhara <aacraid@pmc-sierra.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
diff --git a/drivers/scsi/aacraid/comminit.c b/drivers/scsi/aacraid/comminit.c
index a726148..7ac8fdb 100644
--- a/drivers/scsi/aacraid/comminit.c
+++ b/drivers/scsi/aacraid/comminit.c
@@ -5,7 +5,8 @@
* based on the old aacraid driver that is..
* Adaptec aacraid device driver for Linux.
*
- * Copyright (c) 2000-2007 Adaptec, Inc. (aacraid@adaptec.com)
+ * Copyright (c) 2000-2010 Adaptec, Inc.
+ * 2010 PMC-Sierra, Inc. (aacraid@pmc-sierra.com)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -52,12 +53,16 @@
unsigned long size, align;
const unsigned long fibsize = 4096;
const unsigned long printfbufsiz = 256;
+ unsigned long host_rrq_size = 0;
struct aac_init *init;
dma_addr_t phys;
unsigned long aac_max_hostphysmempages;
- size = fibsize + sizeof(struct aac_init) + commsize + commalign + printfbufsiz;
-
+ if (dev->comm_interface == AAC_COMM_MESSAGE_TYPE1)
+ host_rrq_size = (dev->scsi_host_ptr->can_queue
+ + AAC_NUM_MGT_FIB) * sizeof(u32);
+ size = fibsize + sizeof(struct aac_init) + commsize +
+ commalign + printfbufsiz + host_rrq_size;
base = pci_alloc_consistent(dev->pdev, size, &phys);
@@ -70,8 +75,14 @@
dev->comm_phys = phys;
dev->comm_size = size;
- dev->init = (struct aac_init *)(base + fibsize);
- dev->init_pa = phys + fibsize;
+ if (dev->comm_interface == AAC_COMM_MESSAGE_TYPE1) {
+ dev->host_rrq = (u32 *)(base + fibsize);
+ dev->host_rrq_pa = phys + fibsize;
+ memset(dev->host_rrq, 0, host_rrq_size);
+ }
+
+ dev->init = (struct aac_init *)(base + fibsize + host_rrq_size);
+ dev->init_pa = phys + fibsize + host_rrq_size;
init = dev->init;
@@ -106,8 +117,13 @@
init->InitFlags = 0;
if (dev->comm_interface == AAC_COMM_MESSAGE) {
- init->InitFlags = cpu_to_le32(INITFLAGS_NEW_COMM_SUPPORTED);
+ init->InitFlags |= cpu_to_le32(INITFLAGS_NEW_COMM_SUPPORTED);
dprintk((KERN_WARNING"aacraid: New Comm Interface enabled\n"));
+ } else if (dev->comm_interface == AAC_COMM_MESSAGE_TYPE1) {
+ init->InitStructRevision = cpu_to_le32(ADAPTER_INIT_STRUCT_REVISION_6);
+ init->InitFlags |= cpu_to_le32(INITFLAGS_NEW_COMM_TYPE1_SUPPORTED);
+ dprintk((KERN_WARNING
+ "aacraid: New Comm Interface type1 enabled\n"));
}
init->InitFlags |= cpu_to_le32(INITFLAGS_DRIVER_USES_UTC_TIME |
INITFLAGS_DRIVER_SUPPORTS_PM);
@@ -115,11 +131,18 @@
init->MaxIoSize = cpu_to_le32(dev->scsi_host_ptr->max_sectors << 9);
init->MaxFibSize = cpu_to_le32(dev->max_fib_size);
+ init->MaxNumAif = cpu_to_le32(dev->max_num_aif);
+ init->HostRRQ_AddrHigh = (u32)((u64)dev->host_rrq_pa >> 32);
+ init->HostRRQ_AddrLow = (u32)(dev->host_rrq_pa & 0xffffffff);
+
+
/*
* Increment the base address by the amount already used
*/
- base = base + fibsize + sizeof(struct aac_init);
- phys = (dma_addr_t)((ulong)phys + fibsize + sizeof(struct aac_init));
+ base = base + fibsize + host_rrq_size + sizeof(struct aac_init);
+ phys = (dma_addr_t)((ulong)phys + fibsize + host_rrq_size +
+ sizeof(struct aac_init));
+
/*
* Align the beginning of Headers to commalign
*/
@@ -314,15 +337,22 @@
- sizeof(struct aac_write) + sizeof(struct sgentry))
/ sizeof(struct sgentry);
dev->comm_interface = AAC_COMM_PRODUCER;
- dev->raw_io_64 = 0;
+ dev->raw_io_interface = dev->raw_io_64 = 0;
+
if ((!aac_adapter_sync_cmd(dev, GET_ADAPTER_PROPERTIES,
0, 0, 0, 0, 0, 0, status+0, status+1, status+2, NULL, NULL)) &&
(status[0] == 0x00000001)) {
if (status[1] & le32_to_cpu(AAC_OPT_NEW_COMM_64))
dev->raw_io_64 = 1;
- if (dev->a_ops.adapter_comm &&
- (status[1] & le32_to_cpu(AAC_OPT_NEW_COMM)))
- dev->comm_interface = AAC_COMM_MESSAGE;
+ if (dev->a_ops.adapter_comm) {
+ if (status[1] & le32_to_cpu(AAC_OPT_NEW_COMM_TYPE1)) {
+ dev->comm_interface = AAC_COMM_MESSAGE_TYPE1;
+ dev->raw_io_interface = 1;
+ } else if (status[1] & le32_to_cpu(AAC_OPT_NEW_COMM)) {
+ dev->comm_interface = AAC_COMM_MESSAGE;
+ dev->raw_io_interface = 1;
+ }
+ }
if ((dev->comm_interface == AAC_COMM_MESSAGE) &&
(status[2] > dev->base_size)) {
aac_adapter_ioremap(dev, 0);
@@ -350,10 +380,12 @@
* status[3] & 0xFFFF maximum number FIBs outstanding
*/
host->max_sectors = (status[1] >> 16) << 1;
- dev->max_fib_size = status[1] & 0xFFFF;
+ /* Multiple of 32 for PMC */
+ dev->max_fib_size = status[1] & 0xFFE0;
host->sg_tablesize = status[2] >> 16;
dev->sg_tablesize = status[2] & 0xFFFF;
host->can_queue = (status[3] & 0xFFFF) - AAC_NUM_MGT_FIB;
+ dev->max_num_aif = status[4] & 0xFFFF;
/*
* NOTE:
* All these overrides are based on a fixed internal