|  | /* | 
|  | * arch/arm/mach-ixp4xx/common.c | 
|  | * | 
|  | * Generic code shared across all IXP4XX platforms | 
|  | * | 
|  | * Maintainer: Deepak Saxena <dsaxena@plexity.net> | 
|  | * | 
|  | * Copyright 2002 (c) Intel Corporation | 
|  | * Copyright 2003-2004 (c) MontaVista, Software, Inc. | 
|  | * | 
|  | * This file is licensed under  the terms of the GNU General Public | 
|  | * License version 2. This program is licensed "as is" without any | 
|  | * warranty of any kind, whether express or implied. | 
|  | */ | 
|  |  | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/mm.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/serial.h> | 
|  | #include <linux/sched.h> | 
|  | #include <linux/tty.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/serial_core.h> | 
|  | #include <linux/bootmem.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/bitops.h> | 
|  | #include <linux/time.h> | 
|  | #include <linux/timex.h> | 
|  | #include <linux/clocksource.h> | 
|  | #include <linux/clockchips.h> | 
|  |  | 
|  | #include <asm/arch/udc.h> | 
|  | #include <asm/hardware.h> | 
|  | #include <asm/uaccess.h> | 
|  | #include <asm/io.h> | 
|  | #include <asm/pgtable.h> | 
|  | #include <asm/page.h> | 
|  | #include <asm/irq.h> | 
|  |  | 
|  | #include <asm/mach/map.h> | 
|  | #include <asm/mach/irq.h> | 
|  | #include <asm/mach/time.h> | 
|  |  | 
|  | static int __init ixp4xx_clocksource_init(void); | 
|  | static int __init ixp4xx_clockevent_init(void); | 
|  | static struct clock_event_device clockevent_ixp4xx; | 
|  |  | 
|  | /************************************************************************* | 
|  | * IXP4xx chipset I/O mapping | 
|  | *************************************************************************/ | 
|  | static struct map_desc ixp4xx_io_desc[] __initdata = { | 
|  | {	/* UART, Interrupt ctrl, GPIO, timers, NPEs, MACs, USB .... */ | 
|  | .virtual	= IXP4XX_PERIPHERAL_BASE_VIRT, | 
|  | .pfn		= __phys_to_pfn(IXP4XX_PERIPHERAL_BASE_PHYS), | 
|  | .length		= IXP4XX_PERIPHERAL_REGION_SIZE, | 
|  | .type		= MT_DEVICE | 
|  | }, {	/* Expansion Bus Config Registers */ | 
|  | .virtual	= IXP4XX_EXP_CFG_BASE_VIRT, | 
|  | .pfn		= __phys_to_pfn(IXP4XX_EXP_CFG_BASE_PHYS), | 
|  | .length		= IXP4XX_EXP_CFG_REGION_SIZE, | 
|  | .type		= MT_DEVICE | 
|  | }, {	/* PCI Registers */ | 
|  | .virtual	= IXP4XX_PCI_CFG_BASE_VIRT, | 
|  | .pfn		= __phys_to_pfn(IXP4XX_PCI_CFG_BASE_PHYS), | 
|  | .length		= IXP4XX_PCI_CFG_REGION_SIZE, | 
|  | .type		= MT_DEVICE | 
|  | }, | 
|  | #ifdef CONFIG_DEBUG_LL | 
|  | {	/* Debug UART mapping */ | 
|  | .virtual	= IXP4XX_DEBUG_UART_BASE_VIRT, | 
|  | .pfn		= __phys_to_pfn(IXP4XX_DEBUG_UART_BASE_PHYS), | 
|  | .length		= IXP4XX_DEBUG_UART_REGION_SIZE, | 
|  | .type		= MT_DEVICE | 
|  | } | 
|  | #endif | 
|  | }; | 
|  |  | 
|  | void __init ixp4xx_map_io(void) | 
|  | { | 
|  | iotable_init(ixp4xx_io_desc, ARRAY_SIZE(ixp4xx_io_desc)); | 
|  | } | 
|  |  | 
|  |  | 
|  | /************************************************************************* | 
|  | * IXP4xx chipset IRQ handling | 
|  | * | 
|  | * TODO: GPIO IRQs should be marked invalid until the user of the IRQ | 
|  | *       (be it PCI or something else) configures that GPIO line | 
|  | *       as an IRQ. | 
|  | **************************************************************************/ | 
|  | enum ixp4xx_irq_type { | 
|  | IXP4XX_IRQ_LEVEL, IXP4XX_IRQ_EDGE | 
|  | }; | 
|  |  | 
|  | /* Each bit represents an IRQ: 1: edge-triggered, 0: level triggered */ | 
|  | static unsigned long long ixp4xx_irq_edge = 0; | 
|  |  | 
|  | /* | 
|  | * IRQ -> GPIO mapping table | 
|  | */ | 
|  | static signed char irq2gpio[32] = { | 
|  | -1, -1, -1, -1, -1, -1,  0,  1, | 
|  | -1, -1, -1, -1, -1, -1, -1, -1, | 
|  | -1, -1, -1,  2,  3,  4,  5,  6, | 
|  | 7,  8,  9, 10, 11, 12, -1, -1, | 
|  | }; | 
|  |  | 
|  | int gpio_to_irq(int gpio) | 
|  | { | 
|  | int irq; | 
|  |  | 
|  | for (irq = 0; irq < 32; irq++) { | 
|  | if (irq2gpio[irq] == gpio) | 
|  | return irq; | 
|  | } | 
|  | return -EINVAL; | 
|  | } | 
|  | EXPORT_SYMBOL(gpio_to_irq); | 
|  |  | 
|  | int irq_to_gpio(int irq) | 
|  | { | 
|  | int gpio = (irq < 32) ? irq2gpio[irq] : -EINVAL; | 
|  |  | 
|  | if (gpio == -1) | 
|  | return -EINVAL; | 
|  |  | 
|  | return gpio; | 
|  | } | 
|  | EXPORT_SYMBOL(irq_to_gpio); | 
|  |  | 
|  | static int ixp4xx_set_irq_type(unsigned int irq, unsigned int type) | 
|  | { | 
|  | int line = irq2gpio[irq]; | 
|  | u32 int_style; | 
|  | enum ixp4xx_irq_type irq_type; | 
|  | volatile u32 *int_reg; | 
|  |  | 
|  | /* | 
|  | * Only for GPIO IRQs | 
|  | */ | 
|  | if (line < 0) | 
|  | return -EINVAL; | 
|  |  | 
|  | switch (type){ | 
|  | case IRQT_BOTHEDGE: | 
|  | int_style = IXP4XX_GPIO_STYLE_TRANSITIONAL; | 
|  | irq_type = IXP4XX_IRQ_EDGE; | 
|  | break; | 
|  | case IRQT_RISING: | 
|  | int_style = IXP4XX_GPIO_STYLE_RISING_EDGE; | 
|  | irq_type = IXP4XX_IRQ_EDGE; | 
|  | break; | 
|  | case IRQT_FALLING: | 
|  | int_style = IXP4XX_GPIO_STYLE_FALLING_EDGE; | 
|  | irq_type = IXP4XX_IRQ_EDGE; | 
|  | break; | 
|  | case IRQT_HIGH: | 
|  | int_style = IXP4XX_GPIO_STYLE_ACTIVE_HIGH; | 
|  | irq_type = IXP4XX_IRQ_LEVEL; | 
|  | break; | 
|  | case IRQT_LOW: | 
|  | int_style = IXP4XX_GPIO_STYLE_ACTIVE_LOW; | 
|  | irq_type = IXP4XX_IRQ_LEVEL; | 
|  | break; | 
|  | default: | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | if (irq_type == IXP4XX_IRQ_EDGE) | 
|  | ixp4xx_irq_edge |= (1 << irq); | 
|  | else | 
|  | ixp4xx_irq_edge &= ~(1 << irq); | 
|  |  | 
|  | if (line >= 8) {	/* pins 8-15 */ | 
|  | line -= 8; | 
|  | int_reg = IXP4XX_GPIO_GPIT2R; | 
|  | } else {		/* pins 0-7 */ | 
|  | int_reg = IXP4XX_GPIO_GPIT1R; | 
|  | } | 
|  |  | 
|  | /* Clear the style for the appropriate pin */ | 
|  | *int_reg &= ~(IXP4XX_GPIO_STYLE_CLEAR << | 
|  | (line * IXP4XX_GPIO_STYLE_SIZE)); | 
|  |  | 
|  | *IXP4XX_GPIO_GPISR = (1 << line); | 
|  |  | 
|  | /* Set the new style */ | 
|  | *int_reg |= (int_style << (line * IXP4XX_GPIO_STYLE_SIZE)); | 
|  |  | 
|  | /* Configure the line as an input */ | 
|  | gpio_line_config(irq2gpio[irq], IXP4XX_GPIO_IN); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void ixp4xx_irq_mask(unsigned int irq) | 
|  | { | 
|  | if ((cpu_is_ixp46x() || cpu_is_ixp43x()) && irq >= 32) | 
|  | *IXP4XX_ICMR2 &= ~(1 << (irq - 32)); | 
|  | else | 
|  | *IXP4XX_ICMR &= ~(1 << irq); | 
|  | } | 
|  |  | 
|  | static void ixp4xx_irq_ack(unsigned int irq) | 
|  | { | 
|  | int line = (irq < 32) ? irq2gpio[irq] : -1; | 
|  |  | 
|  | if (line >= 0) | 
|  | *IXP4XX_GPIO_GPISR = (1 << line); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Level triggered interrupts on GPIO lines can only be cleared when the | 
|  | * interrupt condition disappears. | 
|  | */ | 
|  | static void ixp4xx_irq_unmask(unsigned int irq) | 
|  | { | 
|  | if (!(ixp4xx_irq_edge & (1 << irq))) | 
|  | ixp4xx_irq_ack(irq); | 
|  |  | 
|  | if ((cpu_is_ixp46x() || cpu_is_ixp43x()) && irq >= 32) | 
|  | *IXP4XX_ICMR2 |= (1 << (irq - 32)); | 
|  | else | 
|  | *IXP4XX_ICMR |= (1 << irq); | 
|  | } | 
|  |  | 
|  | static struct irq_chip ixp4xx_irq_chip = { | 
|  | .name		= "IXP4xx", | 
|  | .ack		= ixp4xx_irq_ack, | 
|  | .mask		= ixp4xx_irq_mask, | 
|  | .unmask		= ixp4xx_irq_unmask, | 
|  | .set_type	= ixp4xx_set_irq_type, | 
|  | }; | 
|  |  | 
|  | void __init ixp4xx_init_irq(void) | 
|  | { | 
|  | int i = 0; | 
|  |  | 
|  | /* Route all sources to IRQ instead of FIQ */ | 
|  | *IXP4XX_ICLR = 0x0; | 
|  |  | 
|  | /* Disable all interrupt */ | 
|  | *IXP4XX_ICMR = 0x0; | 
|  |  | 
|  | if (cpu_is_ixp46x() || cpu_is_ixp43x()) { | 
|  | /* Route upper 32 sources to IRQ instead of FIQ */ | 
|  | *IXP4XX_ICLR2 = 0x00; | 
|  |  | 
|  | /* Disable upper 32 interrupts */ | 
|  | *IXP4XX_ICMR2 = 0x00; | 
|  | } | 
|  |  | 
|  | /* Default to all level triggered */ | 
|  | for(i = 0; i < NR_IRQS; i++) { | 
|  | set_irq_chip(i, &ixp4xx_irq_chip); | 
|  | set_irq_handler(i, handle_level_irq); | 
|  | set_irq_flags(i, IRQF_VALID); | 
|  | } | 
|  | } | 
|  |  | 
|  |  | 
|  | /************************************************************************* | 
|  | * IXP4xx timer tick | 
|  | * We use OS timer1 on the CPU for the timer tick and the timestamp | 
|  | * counter as a source of real clock ticks to account for missed jiffies. | 
|  | *************************************************************************/ | 
|  |  | 
|  | static irqreturn_t ixp4xx_timer_interrupt(int irq, void *dev_id) | 
|  | { | 
|  | struct clock_event_device *evt = &clockevent_ixp4xx; | 
|  |  | 
|  | /* Clear Pending Interrupt by writing '1' to it */ | 
|  | *IXP4XX_OSST = IXP4XX_OSST_TIMER_1_PEND; | 
|  |  | 
|  | evt->event_handler(evt); | 
|  |  | 
|  | return IRQ_HANDLED; | 
|  | } | 
|  |  | 
|  | static struct irqaction ixp4xx_timer_irq = { | 
|  | .name		= "timer1", | 
|  | .flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, | 
|  | .handler	= ixp4xx_timer_interrupt, | 
|  | }; | 
|  |  | 
|  | void __init ixp4xx_timer_init(void) | 
|  | { | 
|  | /* Reset/disable counter */ | 
|  | *IXP4XX_OSRT1 = 0; | 
|  |  | 
|  | /* Clear Pending Interrupt by writing '1' to it */ | 
|  | *IXP4XX_OSST = IXP4XX_OSST_TIMER_1_PEND; | 
|  |  | 
|  | /* Reset time-stamp counter */ | 
|  | *IXP4XX_OSTS = 0; | 
|  |  | 
|  | /* Connect the interrupt handler and enable the interrupt */ | 
|  | setup_irq(IRQ_IXP4XX_TIMER1, &ixp4xx_timer_irq); | 
|  |  | 
|  | ixp4xx_clocksource_init(); | 
|  | ixp4xx_clockevent_init(); | 
|  | } | 
|  |  | 
|  | struct sys_timer ixp4xx_timer = { | 
|  | .init		= ixp4xx_timer_init, | 
|  | }; | 
|  |  | 
|  | static struct pxa2xx_udc_mach_info ixp4xx_udc_info; | 
|  |  | 
|  | void __init ixp4xx_set_udc_info(struct pxa2xx_udc_mach_info *info) | 
|  | { | 
|  | memcpy(&ixp4xx_udc_info, info, sizeof *info); | 
|  | } | 
|  |  | 
|  | static struct resource ixp4xx_udc_resources[] = { | 
|  | [0] = { | 
|  | .start  = 0xc800b000, | 
|  | .end    = 0xc800bfff, | 
|  | .flags  = IORESOURCE_MEM, | 
|  | }, | 
|  | [1] = { | 
|  | .start  = IRQ_IXP4XX_USB, | 
|  | .end    = IRQ_IXP4XX_USB, | 
|  | .flags  = IORESOURCE_IRQ, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * USB device controller. The IXP4xx uses the same controller as PXA2XX, | 
|  | * so we just use the same device. | 
|  | */ | 
|  | static struct platform_device ixp4xx_udc_device = { | 
|  | .name           = "pxa2xx-udc", | 
|  | .id             = -1, | 
|  | .num_resources  = 2, | 
|  | .resource       = ixp4xx_udc_resources, | 
|  | .dev            = { | 
|  | .platform_data = &ixp4xx_udc_info, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static struct platform_device *ixp4xx_devices[] __initdata = { | 
|  | &ixp4xx_udc_device, | 
|  | }; | 
|  |  | 
|  | static struct resource ixp46x_i2c_resources[] = { | 
|  | [0] = { | 
|  | .start 	= 0xc8011000, | 
|  | .end	= 0xc801101c, | 
|  | .flags	= IORESOURCE_MEM, | 
|  | }, | 
|  | [1] = { | 
|  | .start 	= IRQ_IXP4XX_I2C, | 
|  | .end	= IRQ_IXP4XX_I2C, | 
|  | .flags	= IORESOURCE_IRQ | 
|  | } | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * I2C controller. The IXP46x uses the same block as the IOP3xx, so | 
|  | * we just use the same device name. | 
|  | */ | 
|  | static struct platform_device ixp46x_i2c_controller = { | 
|  | .name		= "IOP3xx-I2C", | 
|  | .id		= 0, | 
|  | .num_resources	= 2, | 
|  | .resource	= ixp46x_i2c_resources | 
|  | }; | 
|  |  | 
|  | static struct platform_device *ixp46x_devices[] __initdata = { | 
|  | &ixp46x_i2c_controller | 
|  | }; | 
|  |  | 
|  | unsigned long ixp4xx_exp_bus_size; | 
|  | EXPORT_SYMBOL(ixp4xx_exp_bus_size); | 
|  |  | 
|  | void __init ixp4xx_sys_init(void) | 
|  | { | 
|  | ixp4xx_exp_bus_size = SZ_16M; | 
|  |  | 
|  | platform_add_devices(ixp4xx_devices, ARRAY_SIZE(ixp4xx_devices)); | 
|  |  | 
|  | if (cpu_is_ixp46x()) { | 
|  | int region; | 
|  |  | 
|  | platform_add_devices(ixp46x_devices, | 
|  | ARRAY_SIZE(ixp46x_devices)); | 
|  |  | 
|  | for (region = 0; region < 7; region++) { | 
|  | if((*(IXP4XX_EXP_REG(0x4 * region)) & 0x200)) { | 
|  | ixp4xx_exp_bus_size = SZ_32M; | 
|  | break; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | printk("IXP4xx: Using %luMiB expansion bus window size\n", | 
|  | ixp4xx_exp_bus_size >> 20); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * clocksource | 
|  | */ | 
|  | cycle_t ixp4xx_get_cycles(void) | 
|  | { | 
|  | return *IXP4XX_OSTS; | 
|  | } | 
|  |  | 
|  | static struct clocksource clocksource_ixp4xx = { | 
|  | .name 		= "OSTS", | 
|  | .rating		= 200, | 
|  | .read		= ixp4xx_get_cycles, | 
|  | .mask		= CLOCKSOURCE_MASK(32), | 
|  | .shift 		= 20, | 
|  | .flags		= CLOCK_SOURCE_IS_CONTINUOUS, | 
|  | }; | 
|  |  | 
|  | unsigned long ixp4xx_timer_freq = FREQ; | 
|  | static int __init ixp4xx_clocksource_init(void) | 
|  | { | 
|  | clocksource_ixp4xx.mult = | 
|  | clocksource_hz2mult(ixp4xx_timer_freq, | 
|  | clocksource_ixp4xx.shift); | 
|  | clocksource_register(&clocksource_ixp4xx); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * clockevents | 
|  | */ | 
|  | static int ixp4xx_set_next_event(unsigned long evt, | 
|  | struct clock_event_device *unused) | 
|  | { | 
|  | unsigned long opts = *IXP4XX_OSRT1 & IXP4XX_OST_RELOAD_MASK; | 
|  |  | 
|  | *IXP4XX_OSRT1 = (evt & ~IXP4XX_OST_RELOAD_MASK) | opts; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void ixp4xx_set_mode(enum clock_event_mode mode, | 
|  | struct clock_event_device *evt) | 
|  | { | 
|  | unsigned long opts = *IXP4XX_OSRT1 & IXP4XX_OST_RELOAD_MASK; | 
|  | unsigned long osrt = *IXP4XX_OSRT1 & ~IXP4XX_OST_RELOAD_MASK; | 
|  |  | 
|  | switch (mode) { | 
|  | case CLOCK_EVT_MODE_PERIODIC: | 
|  | osrt = LATCH & ~IXP4XX_OST_RELOAD_MASK; | 
|  | opts = IXP4XX_OST_ENABLE; | 
|  | break; | 
|  | case CLOCK_EVT_MODE_ONESHOT: | 
|  | /* period set by 'set next_event' */ | 
|  | osrt = 0; | 
|  | opts = IXP4XX_OST_ENABLE | IXP4XX_OST_ONE_SHOT; | 
|  | break; | 
|  | case CLOCK_EVT_MODE_SHUTDOWN: | 
|  | opts &= ~IXP4XX_OST_ENABLE; | 
|  | break; | 
|  | case CLOCK_EVT_MODE_RESUME: | 
|  | opts |= IXP4XX_OST_ENABLE; | 
|  | break; | 
|  | case CLOCK_EVT_MODE_UNUSED: | 
|  | default: | 
|  | osrt = opts = 0; | 
|  | break; | 
|  | } | 
|  |  | 
|  | *IXP4XX_OSRT1 = osrt | opts; | 
|  | } | 
|  |  | 
|  | static struct clock_event_device clockevent_ixp4xx = { | 
|  | .name		= "ixp4xx timer1", | 
|  | .features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, | 
|  | .rating         = 200, | 
|  | .shift		= 24, | 
|  | .set_mode	= ixp4xx_set_mode, | 
|  | .set_next_event	= ixp4xx_set_next_event, | 
|  | }; | 
|  |  | 
|  | static int __init ixp4xx_clockevent_init(void) | 
|  | { | 
|  | clockevent_ixp4xx.mult = div_sc(FREQ, NSEC_PER_SEC, | 
|  | clockevent_ixp4xx.shift); | 
|  | clockevent_ixp4xx.max_delta_ns = | 
|  | clockevent_delta2ns(0xfffffffe, &clockevent_ixp4xx); | 
|  | clockevent_ixp4xx.min_delta_ns = | 
|  | clockevent_delta2ns(0xf, &clockevent_ixp4xx); | 
|  | clockevent_ixp4xx.cpumask = cpumask_of_cpu(0); | 
|  |  | 
|  | clockevents_register_device(&clockevent_ixp4xx); | 
|  | return 0; | 
|  | } |