|  | /* | 
|  | * EHCI HCD (Host Controller Driver) for USB. | 
|  | * | 
|  | * (C) Copyright 2006-2007 Stefan Roese <sr@denx.de>, DENX Software Engineering | 
|  | * | 
|  | * Bus Glue for PPC On-Chip EHCI driver | 
|  | * Tested on AMCC 440EPx | 
|  | * | 
|  | * Based on "ehci-au1xxx.c" by K.Boge <karsten.boge@amd.com> | 
|  | * | 
|  | * This file is licenced under the GPL. | 
|  | */ | 
|  |  | 
|  | #include <linux/platform_device.h> | 
|  |  | 
|  | extern int usb_disabled(void); | 
|  |  | 
|  | /* called during probe() after chip reset completes */ | 
|  | static int ehci_ppc_soc_setup(struct usb_hcd *hcd) | 
|  | { | 
|  | struct ehci_hcd	*ehci = hcd_to_ehci(hcd); | 
|  | int		retval; | 
|  |  | 
|  | retval = ehci_halt(ehci); | 
|  | if (retval) | 
|  | return retval; | 
|  |  | 
|  | retval = ehci_init(hcd); | 
|  | if (retval) | 
|  | return retval; | 
|  |  | 
|  | ehci->sbrn = 0x20; | 
|  | return ehci_reset(ehci); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * usb_ehci_ppc_soc_probe - initialize PPC-SoC-based HCDs | 
|  | * Context: !in_interrupt() | 
|  | * | 
|  | * Allocates basic resources for this USB host controller, and | 
|  | * then invokes the start() method for the HCD associated with it | 
|  | * through the hotplug entry's driver_data. | 
|  | * | 
|  | */ | 
|  | int usb_ehci_ppc_soc_probe(const struct hc_driver *driver, | 
|  | struct usb_hcd **hcd_out, | 
|  | struct platform_device *dev) | 
|  | { | 
|  | int retval; | 
|  | struct usb_hcd *hcd; | 
|  | struct ehci_hcd *ehci; | 
|  |  | 
|  | if (dev->resource[1].flags != IORESOURCE_IRQ) { | 
|  | pr_debug("resource[1] is not IORESOURCE_IRQ"); | 
|  | retval = -ENOMEM; | 
|  | } | 
|  | hcd = usb_create_hcd(driver, &dev->dev, "PPC-SOC EHCI"); | 
|  | if (!hcd) | 
|  | return -ENOMEM; | 
|  | hcd->rsrc_start = dev->resource[0].start; | 
|  | hcd->rsrc_len = dev->resource[0].end - dev->resource[0].start + 1; | 
|  |  | 
|  | if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { | 
|  | pr_debug("request_mem_region failed"); | 
|  | retval = -EBUSY; | 
|  | goto err1; | 
|  | } | 
|  |  | 
|  | hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); | 
|  | if (!hcd->regs) { | 
|  | pr_debug("ioremap failed"); | 
|  | retval = -ENOMEM; | 
|  | goto err2; | 
|  | } | 
|  |  | 
|  | ehci = hcd_to_ehci(hcd); | 
|  | ehci->big_endian_mmio = 1; | 
|  | ehci->big_endian_desc = 1; | 
|  | ehci->caps = hcd->regs; | 
|  | ehci->regs = hcd->regs + HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase)); | 
|  |  | 
|  | /* cache this readonly data; minimize chip reads */ | 
|  | ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params); | 
|  |  | 
|  | #if defined(CONFIG_440EPX) | 
|  | /* | 
|  | * 440EPx Errata USBH_3 | 
|  | * Fix: Enable Break Memory Transfer (BMT) in INSNREG3 | 
|  | */ | 
|  | out_be32((void *)((ulong)(&ehci->regs->command) + 0x8c), (1 << 0)); | 
|  | ehci_dbg(ehci, "Break Memory Transfer (BMT) has beed enabled!\n"); | 
|  | #endif | 
|  |  | 
|  | retval = usb_add_hcd(hcd, dev->resource[1].start, IRQF_DISABLED); | 
|  | if (retval == 0) | 
|  | return retval; | 
|  |  | 
|  | iounmap(hcd->regs); | 
|  | err2: | 
|  | release_mem_region(hcd->rsrc_start, hcd->rsrc_len); | 
|  | err1: | 
|  | usb_put_hcd(hcd); | 
|  | return retval; | 
|  | } | 
|  |  | 
|  | /* may be called without controller electrically present */ | 
|  | /* may be called with controller, bus, and devices active */ | 
|  |  | 
|  | /** | 
|  | * usb_ehci_hcd_ppc_soc_remove - shutdown processing for PPC-SoC-based HCDs | 
|  | * @dev: USB Host Controller being removed | 
|  | * Context: !in_interrupt() | 
|  | * | 
|  | * Reverses the effect of usb_ehci_hcd_ppc_soc_probe(), first invoking | 
|  | * the HCD's stop() method.  It is always called from a thread | 
|  | * context, normally "rmmod", "apmd", or something similar. | 
|  | * | 
|  | */ | 
|  | void usb_ehci_ppc_soc_remove(struct usb_hcd *hcd, struct platform_device *dev) | 
|  | { | 
|  | usb_remove_hcd(hcd); | 
|  | iounmap(hcd->regs); | 
|  | release_mem_region(hcd->rsrc_start, hcd->rsrc_len); | 
|  | usb_put_hcd(hcd); | 
|  | } | 
|  |  | 
|  | static const struct hc_driver ehci_ppc_soc_hc_driver = { | 
|  | .description = hcd_name, | 
|  | .product_desc = "PPC-SOC EHCI", | 
|  | .hcd_priv_size = sizeof(struct ehci_hcd), | 
|  |  | 
|  | /* | 
|  | * generic hardware linkage | 
|  | */ | 
|  | .irq = ehci_irq, | 
|  | .flags = HCD_MEMORY | HCD_USB2, | 
|  |  | 
|  | /* | 
|  | * basic lifecycle operations | 
|  | */ | 
|  | .reset = ehci_ppc_soc_setup, | 
|  | .start = ehci_run, | 
|  | .stop = ehci_stop, | 
|  | .shutdown = ehci_shutdown, | 
|  |  | 
|  | /* | 
|  | * managing i/o requests and associated device resources | 
|  | */ | 
|  | .urb_enqueue = ehci_urb_enqueue, | 
|  | .urb_dequeue = ehci_urb_dequeue, | 
|  | .endpoint_disable = ehci_endpoint_disable, | 
|  |  | 
|  | /* | 
|  | * scheduling support | 
|  | */ | 
|  | .get_frame_number = ehci_get_frame, | 
|  |  | 
|  | /* | 
|  | * root hub support | 
|  | */ | 
|  | .hub_status_data = ehci_hub_status_data, | 
|  | .hub_control = ehci_hub_control, | 
|  | .bus_suspend = ehci_bus_suspend, | 
|  | .bus_resume = ehci_bus_resume, | 
|  | }; | 
|  |  | 
|  | static int ehci_hcd_ppc_soc_drv_probe(struct platform_device *pdev) | 
|  | { | 
|  | struct usb_hcd *hcd = NULL; | 
|  | int ret; | 
|  |  | 
|  | pr_debug("In ehci_hcd_ppc_soc_drv_probe\n"); | 
|  |  | 
|  | if (usb_disabled()) | 
|  | return -ENODEV; | 
|  |  | 
|  | ret = usb_ehci_ppc_soc_probe(&ehci_ppc_soc_hc_driver, &hcd, pdev); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int ehci_hcd_ppc_soc_drv_remove(struct platform_device *pdev) | 
|  | { | 
|  | struct usb_hcd *hcd = platform_get_drvdata(pdev); | 
|  |  | 
|  | usb_ehci_ppc_soc_remove(hcd, pdev); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | MODULE_ALIAS("ppc-soc-ehci"); | 
|  | static struct platform_driver ehci_ppc_soc_driver = { | 
|  | .probe = ehci_hcd_ppc_soc_drv_probe, | 
|  | .remove = ehci_hcd_ppc_soc_drv_remove, | 
|  | .shutdown = usb_hcd_platform_shutdown, | 
|  | .driver = { | 
|  | .name = "ppc-soc-ehci", | 
|  | .bus = &platform_bus_type | 
|  | } | 
|  | }; |