|  | /* -*- mode: c; c-basic-offset: 8; -*- | 
|  | * vim: noexpandtab sw=8 ts=8 sts=0: | 
|  | * | 
|  | * file.c | 
|  | * | 
|  | * File open, close, extend, truncate | 
|  | * | 
|  | * Copyright (C) 2002, 2004 Oracle.  All rights reserved. | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or | 
|  | * modify it under the terms of the GNU General Public | 
|  | * License as published by the Free Software Foundation; either | 
|  | * version 2 of the License, or (at your option) any later version. | 
|  | * | 
|  | * This program is distributed in the hope that it will be useful, | 
|  | * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU | 
|  | * General Public License for more details. | 
|  | * | 
|  | * You should have received a copy of the GNU General Public | 
|  | * License along with this program; if not, write to the | 
|  | * Free Software Foundation, Inc., 59 Temple Place - Suite 330, | 
|  | * Boston, MA 021110-1307, USA. | 
|  | */ | 
|  |  | 
|  | #include <linux/capability.h> | 
|  | #include <linux/fs.h> | 
|  | #include <linux/types.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/highmem.h> | 
|  | #include <linux/pagemap.h> | 
|  | #include <linux/uio.h> | 
|  | #include <linux/sched.h> | 
|  | #include <linux/splice.h> | 
|  | #include <linux/mount.h> | 
|  | #include <linux/writeback.h> | 
|  | #include <linux/falloc.h> | 
|  |  | 
|  | #define MLOG_MASK_PREFIX ML_INODE | 
|  | #include <cluster/masklog.h> | 
|  |  | 
|  | #include "ocfs2.h" | 
|  |  | 
|  | #include "alloc.h" | 
|  | #include "aops.h" | 
|  | #include "dir.h" | 
|  | #include "dlmglue.h" | 
|  | #include "extent_map.h" | 
|  | #include "file.h" | 
|  | #include "sysfile.h" | 
|  | #include "inode.h" | 
|  | #include "ioctl.h" | 
|  | #include "journal.h" | 
|  | #include "mmap.h" | 
|  | #include "suballoc.h" | 
|  | #include "super.h" | 
|  |  | 
|  | #include "buffer_head_io.h" | 
|  |  | 
|  | static int ocfs2_sync_inode(struct inode *inode) | 
|  | { | 
|  | filemap_fdatawrite(inode->i_mapping); | 
|  | return sync_mapping_buffers(inode->i_mapping); | 
|  | } | 
|  |  | 
|  | static int ocfs2_file_open(struct inode *inode, struct file *file) | 
|  | { | 
|  | int status; | 
|  | int mode = file->f_flags; | 
|  | struct ocfs2_inode_info *oi = OCFS2_I(inode); | 
|  |  | 
|  | mlog_entry("(0x%p, 0x%p, '%.*s')\n", inode, file, | 
|  | file->f_path.dentry->d_name.len, file->f_path.dentry->d_name.name); | 
|  |  | 
|  | spin_lock(&oi->ip_lock); | 
|  |  | 
|  | /* Check that the inode hasn't been wiped from disk by another | 
|  | * node. If it hasn't then we're safe as long as we hold the | 
|  | * spin lock until our increment of open count. */ | 
|  | if (OCFS2_I(inode)->ip_flags & OCFS2_INODE_DELETED) { | 
|  | spin_unlock(&oi->ip_lock); | 
|  |  | 
|  | status = -ENOENT; | 
|  | goto leave; | 
|  | } | 
|  |  | 
|  | if (mode & O_DIRECT) | 
|  | oi->ip_flags |= OCFS2_INODE_OPEN_DIRECT; | 
|  |  | 
|  | oi->ip_open_count++; | 
|  | spin_unlock(&oi->ip_lock); | 
|  | status = 0; | 
|  | leave: | 
|  | mlog_exit(status); | 
|  | return status; | 
|  | } | 
|  |  | 
|  | static int ocfs2_file_release(struct inode *inode, struct file *file) | 
|  | { | 
|  | struct ocfs2_inode_info *oi = OCFS2_I(inode); | 
|  |  | 
|  | mlog_entry("(0x%p, 0x%p, '%.*s')\n", inode, file, | 
|  | file->f_path.dentry->d_name.len, | 
|  | file->f_path.dentry->d_name.name); | 
|  |  | 
|  | spin_lock(&oi->ip_lock); | 
|  | if (!--oi->ip_open_count) | 
|  | oi->ip_flags &= ~OCFS2_INODE_OPEN_DIRECT; | 
|  | spin_unlock(&oi->ip_lock); | 
|  |  | 
|  | mlog_exit(0); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ocfs2_sync_file(struct file *file, | 
|  | struct dentry *dentry, | 
|  | int datasync) | 
|  | { | 
|  | int err = 0; | 
|  | journal_t *journal; | 
|  | struct inode *inode = dentry->d_inode; | 
|  | struct ocfs2_super *osb = OCFS2_SB(inode->i_sb); | 
|  |  | 
|  | mlog_entry("(0x%p, 0x%p, %d, '%.*s')\n", file, dentry, datasync, | 
|  | dentry->d_name.len, dentry->d_name.name); | 
|  |  | 
|  | err = ocfs2_sync_inode(dentry->d_inode); | 
|  | if (err) | 
|  | goto bail; | 
|  |  | 
|  | journal = osb->journal->j_journal; | 
|  | err = journal_force_commit(journal); | 
|  |  | 
|  | bail: | 
|  | mlog_exit(err); | 
|  |  | 
|  | return (err < 0) ? -EIO : 0; | 
|  | } | 
|  |  | 
|  | int ocfs2_should_update_atime(struct inode *inode, | 
|  | struct vfsmount *vfsmnt) | 
|  | { | 
|  | struct timespec now; | 
|  | struct ocfs2_super *osb = OCFS2_SB(inode->i_sb); | 
|  |  | 
|  | if (ocfs2_is_hard_readonly(osb) || ocfs2_is_soft_readonly(osb)) | 
|  | return 0; | 
|  |  | 
|  | if ((inode->i_flags & S_NOATIME) || | 
|  | ((inode->i_sb->s_flags & MS_NODIRATIME) && S_ISDIR(inode->i_mode))) | 
|  | return 0; | 
|  |  | 
|  | /* | 
|  | * We can be called with no vfsmnt structure - NFSD will | 
|  | * sometimes do this. | 
|  | * | 
|  | * Note that our action here is different than touch_atime() - | 
|  | * if we can't tell whether this is a noatime mount, then we | 
|  | * don't know whether to trust the value of s_atime_quantum. | 
|  | */ | 
|  | if (vfsmnt == NULL) | 
|  | return 0; | 
|  |  | 
|  | if ((vfsmnt->mnt_flags & MNT_NOATIME) || | 
|  | ((vfsmnt->mnt_flags & MNT_NODIRATIME) && S_ISDIR(inode->i_mode))) | 
|  | return 0; | 
|  |  | 
|  | if (vfsmnt->mnt_flags & MNT_RELATIME) { | 
|  | if ((timespec_compare(&inode->i_atime, &inode->i_mtime) <= 0) || | 
|  | (timespec_compare(&inode->i_atime, &inode->i_ctime) <= 0)) | 
|  | return 1; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | now = CURRENT_TIME; | 
|  | if ((now.tv_sec - inode->i_atime.tv_sec <= osb->s_atime_quantum)) | 
|  | return 0; | 
|  | else | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | int ocfs2_update_inode_atime(struct inode *inode, | 
|  | struct buffer_head *bh) | 
|  | { | 
|  | int ret; | 
|  | struct ocfs2_super *osb = OCFS2_SB(inode->i_sb); | 
|  | handle_t *handle; | 
|  | struct ocfs2_dinode *di = (struct ocfs2_dinode *) bh->b_data; | 
|  |  | 
|  | mlog_entry_void(); | 
|  |  | 
|  | handle = ocfs2_start_trans(osb, OCFS2_INODE_UPDATE_CREDITS); | 
|  | if (handle == NULL) { | 
|  | ret = -ENOMEM; | 
|  | mlog_errno(ret); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | ret = ocfs2_journal_access(handle, inode, bh, | 
|  | OCFS2_JOURNAL_ACCESS_WRITE); | 
|  | if (ret) { | 
|  | mlog_errno(ret); | 
|  | goto out_commit; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Don't use ocfs2_mark_inode_dirty() here as we don't always | 
|  | * have i_mutex to guard against concurrent changes to other | 
|  | * inode fields. | 
|  | */ | 
|  | inode->i_atime = CURRENT_TIME; | 
|  | di->i_atime = cpu_to_le64(inode->i_atime.tv_sec); | 
|  | di->i_atime_nsec = cpu_to_le32(inode->i_atime.tv_nsec); | 
|  |  | 
|  | ret = ocfs2_journal_dirty(handle, bh); | 
|  | if (ret < 0) | 
|  | mlog_errno(ret); | 
|  |  | 
|  | out_commit: | 
|  | ocfs2_commit_trans(OCFS2_SB(inode->i_sb), handle); | 
|  | out: | 
|  | mlog_exit(ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int ocfs2_set_inode_size(handle_t *handle, | 
|  | struct inode *inode, | 
|  | struct buffer_head *fe_bh, | 
|  | u64 new_i_size) | 
|  | { | 
|  | int status; | 
|  |  | 
|  | mlog_entry_void(); | 
|  | i_size_write(inode, new_i_size); | 
|  | inode->i_blocks = ocfs2_inode_sector_count(inode); | 
|  | inode->i_ctime = inode->i_mtime = CURRENT_TIME; | 
|  |  | 
|  | status = ocfs2_mark_inode_dirty(handle, inode, fe_bh); | 
|  | if (status < 0) { | 
|  | mlog_errno(status); | 
|  | goto bail; | 
|  | } | 
|  |  | 
|  | bail: | 
|  | mlog_exit(status); | 
|  | return status; | 
|  | } | 
|  |  | 
|  | static int ocfs2_simple_size_update(struct inode *inode, | 
|  | struct buffer_head *di_bh, | 
|  | u64 new_i_size) | 
|  | { | 
|  | int ret; | 
|  | struct ocfs2_super *osb = OCFS2_SB(inode->i_sb); | 
|  | handle_t *handle = NULL; | 
|  |  | 
|  | handle = ocfs2_start_trans(osb, OCFS2_INODE_UPDATE_CREDITS); | 
|  | if (handle == NULL) { | 
|  | ret = -ENOMEM; | 
|  | mlog_errno(ret); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | ret = ocfs2_set_inode_size(handle, inode, di_bh, | 
|  | new_i_size); | 
|  | if (ret < 0) | 
|  | mlog_errno(ret); | 
|  |  | 
|  | ocfs2_commit_trans(osb, handle); | 
|  | out: | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int ocfs2_orphan_for_truncate(struct ocfs2_super *osb, | 
|  | struct inode *inode, | 
|  | struct buffer_head *fe_bh, | 
|  | u64 new_i_size) | 
|  | { | 
|  | int status; | 
|  | handle_t *handle; | 
|  | struct ocfs2_dinode *di; | 
|  | u64 cluster_bytes; | 
|  |  | 
|  | mlog_entry_void(); | 
|  |  | 
|  | /* TODO: This needs to actually orphan the inode in this | 
|  | * transaction. */ | 
|  |  | 
|  | handle = ocfs2_start_trans(osb, OCFS2_INODE_UPDATE_CREDITS); | 
|  | if (IS_ERR(handle)) { | 
|  | status = PTR_ERR(handle); | 
|  | mlog_errno(status); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | status = ocfs2_journal_access(handle, inode, fe_bh, | 
|  | OCFS2_JOURNAL_ACCESS_WRITE); | 
|  | if (status < 0) { | 
|  | mlog_errno(status); | 
|  | goto out_commit; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Do this before setting i_size. | 
|  | */ | 
|  | cluster_bytes = ocfs2_align_bytes_to_clusters(inode->i_sb, new_i_size); | 
|  | status = ocfs2_zero_range_for_truncate(inode, handle, new_i_size, | 
|  | cluster_bytes); | 
|  | if (status) { | 
|  | mlog_errno(status); | 
|  | goto out_commit; | 
|  | } | 
|  |  | 
|  | i_size_write(inode, new_i_size); | 
|  | inode->i_ctime = inode->i_mtime = CURRENT_TIME; | 
|  |  | 
|  | di = (struct ocfs2_dinode *) fe_bh->b_data; | 
|  | di->i_size = cpu_to_le64(new_i_size); | 
|  | di->i_ctime = di->i_mtime = cpu_to_le64(inode->i_ctime.tv_sec); | 
|  | di->i_ctime_nsec = di->i_mtime_nsec = cpu_to_le32(inode->i_ctime.tv_nsec); | 
|  |  | 
|  | status = ocfs2_journal_dirty(handle, fe_bh); | 
|  | if (status < 0) | 
|  | mlog_errno(status); | 
|  |  | 
|  | out_commit: | 
|  | ocfs2_commit_trans(osb, handle); | 
|  | out: | 
|  |  | 
|  | mlog_exit(status); | 
|  | return status; | 
|  | } | 
|  |  | 
|  | static int ocfs2_truncate_file(struct inode *inode, | 
|  | struct buffer_head *di_bh, | 
|  | u64 new_i_size) | 
|  | { | 
|  | int status = 0; | 
|  | struct ocfs2_dinode *fe = NULL; | 
|  | struct ocfs2_super *osb = OCFS2_SB(inode->i_sb); | 
|  | struct ocfs2_truncate_context *tc = NULL; | 
|  |  | 
|  | mlog_entry("(inode = %llu, new_i_size = %llu\n", | 
|  | (unsigned long long)OCFS2_I(inode)->ip_blkno, | 
|  | (unsigned long long)new_i_size); | 
|  |  | 
|  | fe = (struct ocfs2_dinode *) di_bh->b_data; | 
|  | if (!OCFS2_IS_VALID_DINODE(fe)) { | 
|  | OCFS2_RO_ON_INVALID_DINODE(inode->i_sb, fe); | 
|  | status = -EIO; | 
|  | goto bail; | 
|  | } | 
|  |  | 
|  | mlog_bug_on_msg(le64_to_cpu(fe->i_size) != i_size_read(inode), | 
|  | "Inode %llu, inode i_size = %lld != di " | 
|  | "i_size = %llu, i_flags = 0x%x\n", | 
|  | (unsigned long long)OCFS2_I(inode)->ip_blkno, | 
|  | i_size_read(inode), | 
|  | (unsigned long long)le64_to_cpu(fe->i_size), | 
|  | le32_to_cpu(fe->i_flags)); | 
|  |  | 
|  | if (new_i_size > le64_to_cpu(fe->i_size)) { | 
|  | mlog(0, "asked to truncate file with size (%llu) to size (%llu)!\n", | 
|  | (unsigned long long)le64_to_cpu(fe->i_size), | 
|  | (unsigned long long)new_i_size); | 
|  | status = -EINVAL; | 
|  | mlog_errno(status); | 
|  | goto bail; | 
|  | } | 
|  |  | 
|  | mlog(0, "inode %llu, i_size = %llu, new_i_size = %llu\n", | 
|  | (unsigned long long)le64_to_cpu(fe->i_blkno), | 
|  | (unsigned long long)le64_to_cpu(fe->i_size), | 
|  | (unsigned long long)new_i_size); | 
|  |  | 
|  | /* lets handle the simple truncate cases before doing any more | 
|  | * cluster locking. */ | 
|  | if (new_i_size == le64_to_cpu(fe->i_size)) | 
|  | goto bail; | 
|  |  | 
|  | down_write(&OCFS2_I(inode)->ip_alloc_sem); | 
|  |  | 
|  | /* This forces other nodes to sync and drop their pages. Do | 
|  | * this even if we have a truncate without allocation change - | 
|  | * ocfs2 cluster sizes can be much greater than page size, so | 
|  | * we have to truncate them anyway.  */ | 
|  | status = ocfs2_data_lock(inode, 1); | 
|  | if (status < 0) { | 
|  | up_write(&OCFS2_I(inode)->ip_alloc_sem); | 
|  |  | 
|  | mlog_errno(status); | 
|  | goto bail; | 
|  | } | 
|  |  | 
|  | unmap_mapping_range(inode->i_mapping, new_i_size + PAGE_SIZE - 1, 0, 1); | 
|  | truncate_inode_pages(inode->i_mapping, new_i_size); | 
|  |  | 
|  | if (OCFS2_I(inode)->ip_dyn_features & OCFS2_INLINE_DATA_FL) { | 
|  | status = ocfs2_truncate_inline(inode, di_bh, new_i_size, | 
|  | i_size_read(inode), 1); | 
|  | if (status) | 
|  | mlog_errno(status); | 
|  |  | 
|  | goto bail_unlock_data; | 
|  | } | 
|  |  | 
|  | /* alright, we're going to need to do a full blown alloc size | 
|  | * change. Orphan the inode so that recovery can complete the | 
|  | * truncate if necessary. This does the task of marking | 
|  | * i_size. */ | 
|  | status = ocfs2_orphan_for_truncate(osb, inode, di_bh, new_i_size); | 
|  | if (status < 0) { | 
|  | mlog_errno(status); | 
|  | goto bail_unlock_data; | 
|  | } | 
|  |  | 
|  | status = ocfs2_prepare_truncate(osb, inode, di_bh, &tc); | 
|  | if (status < 0) { | 
|  | mlog_errno(status); | 
|  | goto bail_unlock_data; | 
|  | } | 
|  |  | 
|  | status = ocfs2_commit_truncate(osb, inode, di_bh, tc); | 
|  | if (status < 0) { | 
|  | mlog_errno(status); | 
|  | goto bail_unlock_data; | 
|  | } | 
|  |  | 
|  | /* TODO: orphan dir cleanup here. */ | 
|  | bail_unlock_data: | 
|  | ocfs2_data_unlock(inode, 1); | 
|  |  | 
|  | up_write(&OCFS2_I(inode)->ip_alloc_sem); | 
|  |  | 
|  | bail: | 
|  |  | 
|  | mlog_exit(status); | 
|  | return status; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * extend allocation only here. | 
|  | * we'll update all the disk stuff, and oip->alloc_size | 
|  | * | 
|  | * expect stuff to be locked, a transaction started and enough data / | 
|  | * metadata reservations in the contexts. | 
|  | * | 
|  | * Will return -EAGAIN, and a reason if a restart is needed. | 
|  | * If passed in, *reason will always be set, even in error. | 
|  | */ | 
|  | int ocfs2_do_extend_allocation(struct ocfs2_super *osb, | 
|  | struct inode *inode, | 
|  | u32 *logical_offset, | 
|  | u32 clusters_to_add, | 
|  | int mark_unwritten, | 
|  | struct buffer_head *fe_bh, | 
|  | handle_t *handle, | 
|  | struct ocfs2_alloc_context *data_ac, | 
|  | struct ocfs2_alloc_context *meta_ac, | 
|  | enum ocfs2_alloc_restarted *reason_ret) | 
|  | { | 
|  | int status = 0; | 
|  | int free_extents; | 
|  | struct ocfs2_dinode *fe = (struct ocfs2_dinode *) fe_bh->b_data; | 
|  | enum ocfs2_alloc_restarted reason = RESTART_NONE; | 
|  | u32 bit_off, num_bits; | 
|  | u64 block; | 
|  | u8 flags = 0; | 
|  |  | 
|  | BUG_ON(!clusters_to_add); | 
|  |  | 
|  | if (mark_unwritten) | 
|  | flags = OCFS2_EXT_UNWRITTEN; | 
|  |  | 
|  | free_extents = ocfs2_num_free_extents(osb, inode, fe); | 
|  | if (free_extents < 0) { | 
|  | status = free_extents; | 
|  | mlog_errno(status); | 
|  | goto leave; | 
|  | } | 
|  |  | 
|  | /* there are two cases which could cause us to EAGAIN in the | 
|  | * we-need-more-metadata case: | 
|  | * 1) we haven't reserved *any* | 
|  | * 2) we are so fragmented, we've needed to add metadata too | 
|  | *    many times. */ | 
|  | if (!free_extents && !meta_ac) { | 
|  | mlog(0, "we haven't reserved any metadata!\n"); | 
|  | status = -EAGAIN; | 
|  | reason = RESTART_META; | 
|  | goto leave; | 
|  | } else if ((!free_extents) | 
|  | && (ocfs2_alloc_context_bits_left(meta_ac) | 
|  | < ocfs2_extend_meta_needed(fe))) { | 
|  | mlog(0, "filesystem is really fragmented...\n"); | 
|  | status = -EAGAIN; | 
|  | reason = RESTART_META; | 
|  | goto leave; | 
|  | } | 
|  |  | 
|  | status = __ocfs2_claim_clusters(osb, handle, data_ac, 1, | 
|  | clusters_to_add, &bit_off, &num_bits); | 
|  | if (status < 0) { | 
|  | if (status != -ENOSPC) | 
|  | mlog_errno(status); | 
|  | goto leave; | 
|  | } | 
|  |  | 
|  | BUG_ON(num_bits > clusters_to_add); | 
|  |  | 
|  | /* reserve our write early -- insert_extent may update the inode */ | 
|  | status = ocfs2_journal_access(handle, inode, fe_bh, | 
|  | OCFS2_JOURNAL_ACCESS_WRITE); | 
|  | if (status < 0) { | 
|  | mlog_errno(status); | 
|  | goto leave; | 
|  | } | 
|  |  | 
|  | block = ocfs2_clusters_to_blocks(osb->sb, bit_off); | 
|  | mlog(0, "Allocating %u clusters at block %u for inode %llu\n", | 
|  | num_bits, bit_off, (unsigned long long)OCFS2_I(inode)->ip_blkno); | 
|  | status = ocfs2_insert_extent(osb, handle, inode, fe_bh, | 
|  | *logical_offset, block, num_bits, | 
|  | flags, meta_ac); | 
|  | if (status < 0) { | 
|  | mlog_errno(status); | 
|  | goto leave; | 
|  | } | 
|  |  | 
|  | status = ocfs2_journal_dirty(handle, fe_bh); | 
|  | if (status < 0) { | 
|  | mlog_errno(status); | 
|  | goto leave; | 
|  | } | 
|  |  | 
|  | clusters_to_add -= num_bits; | 
|  | *logical_offset += num_bits; | 
|  |  | 
|  | if (clusters_to_add) { | 
|  | mlog(0, "need to alloc once more, clusters = %u, wanted = " | 
|  | "%u\n", fe->i_clusters, clusters_to_add); | 
|  | status = -EAGAIN; | 
|  | reason = RESTART_TRANS; | 
|  | } | 
|  |  | 
|  | leave: | 
|  | mlog_exit(status); | 
|  | if (reason_ret) | 
|  | *reason_ret = reason; | 
|  | return status; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * For a given allocation, determine which allocators will need to be | 
|  | * accessed, and lock them, reserving the appropriate number of bits. | 
|  | * | 
|  | * Sparse file systems call this from ocfs2_write_begin_nolock() | 
|  | * and ocfs2_allocate_unwritten_extents(). | 
|  | * | 
|  | * File systems which don't support holes call this from | 
|  | * ocfs2_extend_allocation(). | 
|  | */ | 
|  | int ocfs2_lock_allocators(struct inode *inode, struct ocfs2_dinode *di, | 
|  | u32 clusters_to_add, u32 extents_to_split, | 
|  | struct ocfs2_alloc_context **data_ac, | 
|  | struct ocfs2_alloc_context **meta_ac) | 
|  | { | 
|  | int ret = 0, num_free_extents; | 
|  | unsigned int max_recs_needed = clusters_to_add + 2 * extents_to_split; | 
|  | struct ocfs2_super *osb = OCFS2_SB(inode->i_sb); | 
|  |  | 
|  | *meta_ac = NULL; | 
|  | if (data_ac) | 
|  | *data_ac = NULL; | 
|  |  | 
|  | BUG_ON(clusters_to_add != 0 && data_ac == NULL); | 
|  |  | 
|  | mlog(0, "extend inode %llu, i_size = %lld, di->i_clusters = %u, " | 
|  | "clusters_to_add = %u, extents_to_split = %u\n", | 
|  | (unsigned long long)OCFS2_I(inode)->ip_blkno, i_size_read(inode), | 
|  | le32_to_cpu(di->i_clusters), clusters_to_add, extents_to_split); | 
|  |  | 
|  | num_free_extents = ocfs2_num_free_extents(osb, inode, di); | 
|  | if (num_free_extents < 0) { | 
|  | ret = num_free_extents; | 
|  | mlog_errno(ret); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Sparse allocation file systems need to be more conservative | 
|  | * with reserving room for expansion - the actual allocation | 
|  | * happens while we've got a journal handle open so re-taking | 
|  | * a cluster lock (because we ran out of room for another | 
|  | * extent) will violate ordering rules. | 
|  | * | 
|  | * Most of the time we'll only be seeing this 1 cluster at a time | 
|  | * anyway. | 
|  | * | 
|  | * Always lock for any unwritten extents - we might want to | 
|  | * add blocks during a split. | 
|  | */ | 
|  | if (!num_free_extents || | 
|  | (ocfs2_sparse_alloc(osb) && num_free_extents < max_recs_needed)) { | 
|  | ret = ocfs2_reserve_new_metadata(osb, di, meta_ac); | 
|  | if (ret < 0) { | 
|  | if (ret != -ENOSPC) | 
|  | mlog_errno(ret); | 
|  | goto out; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (clusters_to_add == 0) | 
|  | goto out; | 
|  |  | 
|  | ret = ocfs2_reserve_clusters(osb, clusters_to_add, data_ac); | 
|  | if (ret < 0) { | 
|  | if (ret != -ENOSPC) | 
|  | mlog_errno(ret); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | out: | 
|  | if (ret) { | 
|  | if (*meta_ac) { | 
|  | ocfs2_free_alloc_context(*meta_ac); | 
|  | *meta_ac = NULL; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * We cannot have an error and a non null *data_ac. | 
|  | */ | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int __ocfs2_extend_allocation(struct inode *inode, u32 logical_start, | 
|  | u32 clusters_to_add, int mark_unwritten) | 
|  | { | 
|  | int status = 0; | 
|  | int restart_func = 0; | 
|  | int credits; | 
|  | u32 prev_clusters; | 
|  | struct buffer_head *bh = NULL; | 
|  | struct ocfs2_dinode *fe = NULL; | 
|  | handle_t *handle = NULL; | 
|  | struct ocfs2_alloc_context *data_ac = NULL; | 
|  | struct ocfs2_alloc_context *meta_ac = NULL; | 
|  | enum ocfs2_alloc_restarted why; | 
|  | struct ocfs2_super *osb = OCFS2_SB(inode->i_sb); | 
|  |  | 
|  | mlog_entry("(clusters_to_add = %u)\n", clusters_to_add); | 
|  |  | 
|  | /* | 
|  | * This function only exists for file systems which don't | 
|  | * support holes. | 
|  | */ | 
|  | BUG_ON(mark_unwritten && !ocfs2_sparse_alloc(osb)); | 
|  |  | 
|  | status = ocfs2_read_block(osb, OCFS2_I(inode)->ip_blkno, &bh, | 
|  | OCFS2_BH_CACHED, inode); | 
|  | if (status < 0) { | 
|  | mlog_errno(status); | 
|  | goto leave; | 
|  | } | 
|  |  | 
|  | fe = (struct ocfs2_dinode *) bh->b_data; | 
|  | if (!OCFS2_IS_VALID_DINODE(fe)) { | 
|  | OCFS2_RO_ON_INVALID_DINODE(inode->i_sb, fe); | 
|  | status = -EIO; | 
|  | goto leave; | 
|  | } | 
|  |  | 
|  | restart_all: | 
|  | BUG_ON(le32_to_cpu(fe->i_clusters) != OCFS2_I(inode)->ip_clusters); | 
|  |  | 
|  | status = ocfs2_lock_allocators(inode, fe, clusters_to_add, 0, &data_ac, | 
|  | &meta_ac); | 
|  | if (status) { | 
|  | mlog_errno(status); | 
|  | goto leave; | 
|  | } | 
|  |  | 
|  | credits = ocfs2_calc_extend_credits(osb->sb, fe, clusters_to_add); | 
|  | handle = ocfs2_start_trans(osb, credits); | 
|  | if (IS_ERR(handle)) { | 
|  | status = PTR_ERR(handle); | 
|  | handle = NULL; | 
|  | mlog_errno(status); | 
|  | goto leave; | 
|  | } | 
|  |  | 
|  | restarted_transaction: | 
|  | /* reserve a write to the file entry early on - that we if we | 
|  | * run out of credits in the allocation path, we can still | 
|  | * update i_size. */ | 
|  | status = ocfs2_journal_access(handle, inode, bh, | 
|  | OCFS2_JOURNAL_ACCESS_WRITE); | 
|  | if (status < 0) { | 
|  | mlog_errno(status); | 
|  | goto leave; | 
|  | } | 
|  |  | 
|  | prev_clusters = OCFS2_I(inode)->ip_clusters; | 
|  |  | 
|  | status = ocfs2_do_extend_allocation(osb, | 
|  | inode, | 
|  | &logical_start, | 
|  | clusters_to_add, | 
|  | mark_unwritten, | 
|  | bh, | 
|  | handle, | 
|  | data_ac, | 
|  | meta_ac, | 
|  | &why); | 
|  | if ((status < 0) && (status != -EAGAIN)) { | 
|  | if (status != -ENOSPC) | 
|  | mlog_errno(status); | 
|  | goto leave; | 
|  | } | 
|  |  | 
|  | status = ocfs2_journal_dirty(handle, bh); | 
|  | if (status < 0) { | 
|  | mlog_errno(status); | 
|  | goto leave; | 
|  | } | 
|  |  | 
|  | spin_lock(&OCFS2_I(inode)->ip_lock); | 
|  | clusters_to_add -= (OCFS2_I(inode)->ip_clusters - prev_clusters); | 
|  | spin_unlock(&OCFS2_I(inode)->ip_lock); | 
|  |  | 
|  | if (why != RESTART_NONE && clusters_to_add) { | 
|  | if (why == RESTART_META) { | 
|  | mlog(0, "restarting function.\n"); | 
|  | restart_func = 1; | 
|  | } else { | 
|  | BUG_ON(why != RESTART_TRANS); | 
|  |  | 
|  | mlog(0, "restarting transaction.\n"); | 
|  | /* TODO: This can be more intelligent. */ | 
|  | credits = ocfs2_calc_extend_credits(osb->sb, | 
|  | fe, | 
|  | clusters_to_add); | 
|  | status = ocfs2_extend_trans(handle, credits); | 
|  | if (status < 0) { | 
|  | /* handle still has to be committed at | 
|  | * this point. */ | 
|  | status = -ENOMEM; | 
|  | mlog_errno(status); | 
|  | goto leave; | 
|  | } | 
|  | goto restarted_transaction; | 
|  | } | 
|  | } | 
|  |  | 
|  | mlog(0, "fe: i_clusters = %u, i_size=%llu\n", | 
|  | le32_to_cpu(fe->i_clusters), | 
|  | (unsigned long long)le64_to_cpu(fe->i_size)); | 
|  | mlog(0, "inode: ip_clusters=%u, i_size=%lld\n", | 
|  | OCFS2_I(inode)->ip_clusters, i_size_read(inode)); | 
|  |  | 
|  | leave: | 
|  | if (handle) { | 
|  | ocfs2_commit_trans(osb, handle); | 
|  | handle = NULL; | 
|  | } | 
|  | if (data_ac) { | 
|  | ocfs2_free_alloc_context(data_ac); | 
|  | data_ac = NULL; | 
|  | } | 
|  | if (meta_ac) { | 
|  | ocfs2_free_alloc_context(meta_ac); | 
|  | meta_ac = NULL; | 
|  | } | 
|  | if ((!status) && restart_func) { | 
|  | restart_func = 0; | 
|  | goto restart_all; | 
|  | } | 
|  | if (bh) { | 
|  | brelse(bh); | 
|  | bh = NULL; | 
|  | } | 
|  |  | 
|  | mlog_exit(status); | 
|  | return status; | 
|  | } | 
|  |  | 
|  | /* Some parts of this taken from generic_cont_expand, which turned out | 
|  | * to be too fragile to do exactly what we need without us having to | 
|  | * worry about recursive locking in ->prepare_write() and | 
|  | * ->commit_write(). */ | 
|  | static int ocfs2_write_zero_page(struct inode *inode, | 
|  | u64 size) | 
|  | { | 
|  | struct address_space *mapping = inode->i_mapping; | 
|  | struct page *page; | 
|  | unsigned long index; | 
|  | unsigned int offset; | 
|  | handle_t *handle = NULL; | 
|  | int ret; | 
|  |  | 
|  | offset = (size & (PAGE_CACHE_SIZE-1)); /* Within page */ | 
|  | /* ugh.  in prepare/commit_write, if from==to==start of block, we | 
|  | ** skip the prepare.  make sure we never send an offset for the start | 
|  | ** of a block | 
|  | */ | 
|  | if ((offset & (inode->i_sb->s_blocksize - 1)) == 0) { | 
|  | offset++; | 
|  | } | 
|  | index = size >> PAGE_CACHE_SHIFT; | 
|  |  | 
|  | page = grab_cache_page(mapping, index); | 
|  | if (!page) { | 
|  | ret = -ENOMEM; | 
|  | mlog_errno(ret); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | ret = ocfs2_prepare_write_nolock(inode, page, offset, offset); | 
|  | if (ret < 0) { | 
|  | mlog_errno(ret); | 
|  | goto out_unlock; | 
|  | } | 
|  |  | 
|  | if (ocfs2_should_order_data(inode)) { | 
|  | handle = ocfs2_start_walk_page_trans(inode, page, offset, | 
|  | offset); | 
|  | if (IS_ERR(handle)) { | 
|  | ret = PTR_ERR(handle); | 
|  | handle = NULL; | 
|  | goto out_unlock; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* must not update i_size! */ | 
|  | ret = block_commit_write(page, offset, offset); | 
|  | if (ret < 0) | 
|  | mlog_errno(ret); | 
|  | else | 
|  | ret = 0; | 
|  |  | 
|  | if (handle) | 
|  | ocfs2_commit_trans(OCFS2_SB(inode->i_sb), handle); | 
|  | out_unlock: | 
|  | unlock_page(page); | 
|  | page_cache_release(page); | 
|  | out: | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int ocfs2_zero_extend(struct inode *inode, | 
|  | u64 zero_to_size) | 
|  | { | 
|  | int ret = 0; | 
|  | u64 start_off; | 
|  | struct super_block *sb = inode->i_sb; | 
|  |  | 
|  | start_off = ocfs2_align_bytes_to_blocks(sb, i_size_read(inode)); | 
|  | while (start_off < zero_to_size) { | 
|  | ret = ocfs2_write_zero_page(inode, start_off); | 
|  | if (ret < 0) { | 
|  | mlog_errno(ret); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | start_off += sb->s_blocksize; | 
|  |  | 
|  | /* | 
|  | * Very large extends have the potential to lock up | 
|  | * the cpu for extended periods of time. | 
|  | */ | 
|  | cond_resched(); | 
|  | } | 
|  |  | 
|  | out: | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | int ocfs2_extend_no_holes(struct inode *inode, u64 new_i_size, u64 zero_to) | 
|  | { | 
|  | int ret; | 
|  | u32 clusters_to_add; | 
|  | struct ocfs2_inode_info *oi = OCFS2_I(inode); | 
|  |  | 
|  | clusters_to_add = ocfs2_clusters_for_bytes(inode->i_sb, new_i_size); | 
|  | if (clusters_to_add < oi->ip_clusters) | 
|  | clusters_to_add = 0; | 
|  | else | 
|  | clusters_to_add -= oi->ip_clusters; | 
|  |  | 
|  | if (clusters_to_add) { | 
|  | ret = __ocfs2_extend_allocation(inode, oi->ip_clusters, | 
|  | clusters_to_add, 0); | 
|  | if (ret) { | 
|  | mlog_errno(ret); | 
|  | goto out; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Call this even if we don't add any clusters to the tree. We | 
|  | * still need to zero the area between the old i_size and the | 
|  | * new i_size. | 
|  | */ | 
|  | ret = ocfs2_zero_extend(inode, zero_to); | 
|  | if (ret < 0) | 
|  | mlog_errno(ret); | 
|  |  | 
|  | out: | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int ocfs2_extend_file(struct inode *inode, | 
|  | struct buffer_head *di_bh, | 
|  | u64 new_i_size) | 
|  | { | 
|  | int ret = 0, data_locked = 0; | 
|  | struct ocfs2_inode_info *oi = OCFS2_I(inode); | 
|  |  | 
|  | BUG_ON(!di_bh); | 
|  |  | 
|  | /* setattr sometimes calls us like this. */ | 
|  | if (new_i_size == 0) | 
|  | goto out; | 
|  |  | 
|  | if (i_size_read(inode) == new_i_size) | 
|  | goto out; | 
|  | BUG_ON(new_i_size < i_size_read(inode)); | 
|  |  | 
|  | /* | 
|  | * Fall through for converting inline data, even if the fs | 
|  | * supports sparse files. | 
|  | * | 
|  | * The check for inline data here is legal - nobody can add | 
|  | * the feature since we have i_mutex. We must check it again | 
|  | * after acquiring ip_alloc_sem though, as paths like mmap | 
|  | * might have raced us to converting the inode to extents. | 
|  | */ | 
|  | if (!(oi->ip_dyn_features & OCFS2_INLINE_DATA_FL) | 
|  | && ocfs2_sparse_alloc(OCFS2_SB(inode->i_sb))) | 
|  | goto out_update_size; | 
|  |  | 
|  | /* | 
|  | * protect the pages that ocfs2_zero_extend is going to be | 
|  | * pulling into the page cache.. we do this before the | 
|  | * metadata extend so that we don't get into the situation | 
|  | * where we've extended the metadata but can't get the data | 
|  | * lock to zero. | 
|  | */ | 
|  | ret = ocfs2_data_lock(inode, 1); | 
|  | if (ret < 0) { | 
|  | mlog_errno(ret); | 
|  | goto out; | 
|  | } | 
|  | data_locked = 1; | 
|  |  | 
|  | /* | 
|  | * The alloc sem blocks people in read/write from reading our | 
|  | * allocation until we're done changing it. We depend on | 
|  | * i_mutex to block other extend/truncate calls while we're | 
|  | * here. | 
|  | */ | 
|  | down_write(&oi->ip_alloc_sem); | 
|  |  | 
|  | if (oi->ip_dyn_features & OCFS2_INLINE_DATA_FL) { | 
|  | /* | 
|  | * We can optimize small extends by keeping the inodes | 
|  | * inline data. | 
|  | */ | 
|  | if (ocfs2_size_fits_inline_data(di_bh, new_i_size)) { | 
|  | up_write(&oi->ip_alloc_sem); | 
|  | goto out_update_size; | 
|  | } | 
|  |  | 
|  | ret = ocfs2_convert_inline_data_to_extents(inode, di_bh); | 
|  | if (ret) { | 
|  | up_write(&oi->ip_alloc_sem); | 
|  |  | 
|  | mlog_errno(ret); | 
|  | goto out_unlock; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (!ocfs2_sparse_alloc(OCFS2_SB(inode->i_sb))) | 
|  | ret = ocfs2_extend_no_holes(inode, new_i_size, new_i_size); | 
|  |  | 
|  | up_write(&oi->ip_alloc_sem); | 
|  |  | 
|  | if (ret < 0) { | 
|  | mlog_errno(ret); | 
|  | goto out_unlock; | 
|  | } | 
|  |  | 
|  | out_update_size: | 
|  | ret = ocfs2_simple_size_update(inode, di_bh, new_i_size); | 
|  | if (ret < 0) | 
|  | mlog_errno(ret); | 
|  |  | 
|  | out_unlock: | 
|  | if (data_locked) | 
|  | ocfs2_data_unlock(inode, 1); | 
|  |  | 
|  | out: | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | int ocfs2_setattr(struct dentry *dentry, struct iattr *attr) | 
|  | { | 
|  | int status = 0, size_change; | 
|  | struct inode *inode = dentry->d_inode; | 
|  | struct super_block *sb = inode->i_sb; | 
|  | struct ocfs2_super *osb = OCFS2_SB(sb); | 
|  | struct buffer_head *bh = NULL; | 
|  | handle_t *handle = NULL; | 
|  |  | 
|  | mlog_entry("(0x%p, '%.*s')\n", dentry, | 
|  | dentry->d_name.len, dentry->d_name.name); | 
|  |  | 
|  | if (attr->ia_valid & ATTR_MODE) | 
|  | mlog(0, "mode change: %d\n", attr->ia_mode); | 
|  | if (attr->ia_valid & ATTR_UID) | 
|  | mlog(0, "uid change: %d\n", attr->ia_uid); | 
|  | if (attr->ia_valid & ATTR_GID) | 
|  | mlog(0, "gid change: %d\n", attr->ia_gid); | 
|  | if (attr->ia_valid & ATTR_SIZE) | 
|  | mlog(0, "size change...\n"); | 
|  | if (attr->ia_valid & (ATTR_ATIME | ATTR_MTIME | ATTR_CTIME)) | 
|  | mlog(0, "time change...\n"); | 
|  |  | 
|  | #define OCFS2_VALID_ATTRS (ATTR_ATIME | ATTR_MTIME | ATTR_CTIME | ATTR_SIZE \ | 
|  | | ATTR_GID | ATTR_UID | ATTR_MODE) | 
|  | if (!(attr->ia_valid & OCFS2_VALID_ATTRS)) { | 
|  | mlog(0, "can't handle attrs: 0x%x\n", attr->ia_valid); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | status = inode_change_ok(inode, attr); | 
|  | if (status) | 
|  | return status; | 
|  |  | 
|  | size_change = S_ISREG(inode->i_mode) && attr->ia_valid & ATTR_SIZE; | 
|  | if (size_change) { | 
|  | status = ocfs2_rw_lock(inode, 1); | 
|  | if (status < 0) { | 
|  | mlog_errno(status); | 
|  | goto bail; | 
|  | } | 
|  | } | 
|  |  | 
|  | status = ocfs2_meta_lock(inode, &bh, 1); | 
|  | if (status < 0) { | 
|  | if (status != -ENOENT) | 
|  | mlog_errno(status); | 
|  | goto bail_unlock_rw; | 
|  | } | 
|  |  | 
|  | if (size_change && attr->ia_size != i_size_read(inode)) { | 
|  | if (attr->ia_size > sb->s_maxbytes) { | 
|  | status = -EFBIG; | 
|  | goto bail_unlock; | 
|  | } | 
|  |  | 
|  | if (i_size_read(inode) > attr->ia_size) | 
|  | status = ocfs2_truncate_file(inode, bh, attr->ia_size); | 
|  | else | 
|  | status = ocfs2_extend_file(inode, bh, attr->ia_size); | 
|  | if (status < 0) { | 
|  | if (status != -ENOSPC) | 
|  | mlog_errno(status); | 
|  | status = -ENOSPC; | 
|  | goto bail_unlock; | 
|  | } | 
|  | } | 
|  |  | 
|  | handle = ocfs2_start_trans(osb, OCFS2_INODE_UPDATE_CREDITS); | 
|  | if (IS_ERR(handle)) { | 
|  | status = PTR_ERR(handle); | 
|  | mlog_errno(status); | 
|  | goto bail_unlock; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * This will intentionally not wind up calling vmtruncate(), | 
|  | * since all the work for a size change has been done above. | 
|  | * Otherwise, we could get into problems with truncate as | 
|  | * ip_alloc_sem is used there to protect against i_size | 
|  | * changes. | 
|  | */ | 
|  | status = inode_setattr(inode, attr); | 
|  | if (status < 0) { | 
|  | mlog_errno(status); | 
|  | goto bail_commit; | 
|  | } | 
|  |  | 
|  | status = ocfs2_mark_inode_dirty(handle, inode, bh); | 
|  | if (status < 0) | 
|  | mlog_errno(status); | 
|  |  | 
|  | bail_commit: | 
|  | ocfs2_commit_trans(osb, handle); | 
|  | bail_unlock: | 
|  | ocfs2_meta_unlock(inode, 1); | 
|  | bail_unlock_rw: | 
|  | if (size_change) | 
|  | ocfs2_rw_unlock(inode, 1); | 
|  | bail: | 
|  | if (bh) | 
|  | brelse(bh); | 
|  |  | 
|  | mlog_exit(status); | 
|  | return status; | 
|  | } | 
|  |  | 
|  | int ocfs2_getattr(struct vfsmount *mnt, | 
|  | struct dentry *dentry, | 
|  | struct kstat *stat) | 
|  | { | 
|  | struct inode *inode = dentry->d_inode; | 
|  | struct super_block *sb = dentry->d_inode->i_sb; | 
|  | struct ocfs2_super *osb = sb->s_fs_info; | 
|  | int err; | 
|  |  | 
|  | mlog_entry_void(); | 
|  |  | 
|  | err = ocfs2_inode_revalidate(dentry); | 
|  | if (err) { | 
|  | if (err != -ENOENT) | 
|  | mlog_errno(err); | 
|  | goto bail; | 
|  | } | 
|  |  | 
|  | generic_fillattr(inode, stat); | 
|  |  | 
|  | /* We set the blksize from the cluster size for performance */ | 
|  | stat->blksize = osb->s_clustersize; | 
|  |  | 
|  | bail: | 
|  | mlog_exit(err); | 
|  |  | 
|  | return err; | 
|  | } | 
|  |  | 
|  | int ocfs2_permission(struct inode *inode, int mask, struct nameidata *nd) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | mlog_entry_void(); | 
|  |  | 
|  | ret = ocfs2_meta_lock(inode, NULL, 0); | 
|  | if (ret) { | 
|  | if (ret != -ENOENT) | 
|  | mlog_errno(ret); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | ret = generic_permission(inode, mask, NULL); | 
|  |  | 
|  | ocfs2_meta_unlock(inode, 0); | 
|  | out: | 
|  | mlog_exit(ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int __ocfs2_write_remove_suid(struct inode *inode, | 
|  | struct buffer_head *bh) | 
|  | { | 
|  | int ret; | 
|  | handle_t *handle; | 
|  | struct ocfs2_super *osb = OCFS2_SB(inode->i_sb); | 
|  | struct ocfs2_dinode *di; | 
|  |  | 
|  | mlog_entry("(Inode %llu, mode 0%o)\n", | 
|  | (unsigned long long)OCFS2_I(inode)->ip_blkno, inode->i_mode); | 
|  |  | 
|  | handle = ocfs2_start_trans(osb, OCFS2_INODE_UPDATE_CREDITS); | 
|  | if (handle == NULL) { | 
|  | ret = -ENOMEM; | 
|  | mlog_errno(ret); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | ret = ocfs2_journal_access(handle, inode, bh, | 
|  | OCFS2_JOURNAL_ACCESS_WRITE); | 
|  | if (ret < 0) { | 
|  | mlog_errno(ret); | 
|  | goto out_trans; | 
|  | } | 
|  |  | 
|  | inode->i_mode &= ~S_ISUID; | 
|  | if ((inode->i_mode & S_ISGID) && (inode->i_mode & S_IXGRP)) | 
|  | inode->i_mode &= ~S_ISGID; | 
|  |  | 
|  | di = (struct ocfs2_dinode *) bh->b_data; | 
|  | di->i_mode = cpu_to_le16(inode->i_mode); | 
|  |  | 
|  | ret = ocfs2_journal_dirty(handle, bh); | 
|  | if (ret < 0) | 
|  | mlog_errno(ret); | 
|  |  | 
|  | out_trans: | 
|  | ocfs2_commit_trans(osb, handle); | 
|  | out: | 
|  | mlog_exit(ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Will look for holes and unwritten extents in the range starting at | 
|  | * pos for count bytes (inclusive). | 
|  | */ | 
|  | static int ocfs2_check_range_for_holes(struct inode *inode, loff_t pos, | 
|  | size_t count) | 
|  | { | 
|  | int ret = 0; | 
|  | unsigned int extent_flags; | 
|  | u32 cpos, clusters, extent_len, phys_cpos; | 
|  | struct super_block *sb = inode->i_sb; | 
|  |  | 
|  | cpos = pos >> OCFS2_SB(sb)->s_clustersize_bits; | 
|  | clusters = ocfs2_clusters_for_bytes(sb, pos + count) - cpos; | 
|  |  | 
|  | while (clusters) { | 
|  | ret = ocfs2_get_clusters(inode, cpos, &phys_cpos, &extent_len, | 
|  | &extent_flags); | 
|  | if (ret < 0) { | 
|  | mlog_errno(ret); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if (phys_cpos == 0 || (extent_flags & OCFS2_EXT_UNWRITTEN)) { | 
|  | ret = 1; | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (extent_len > clusters) | 
|  | extent_len = clusters; | 
|  |  | 
|  | clusters -= extent_len; | 
|  | cpos += extent_len; | 
|  | } | 
|  | out: | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int ocfs2_write_remove_suid(struct inode *inode) | 
|  | { | 
|  | int ret; | 
|  | struct buffer_head *bh = NULL; | 
|  | struct ocfs2_inode_info *oi = OCFS2_I(inode); | 
|  |  | 
|  | ret = ocfs2_read_block(OCFS2_SB(inode->i_sb), | 
|  | oi->ip_blkno, &bh, OCFS2_BH_CACHED, inode); | 
|  | if (ret < 0) { | 
|  | mlog_errno(ret); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | ret =  __ocfs2_write_remove_suid(inode, bh); | 
|  | out: | 
|  | brelse(bh); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Allocate enough extents to cover the region starting at byte offset | 
|  | * start for len bytes. Existing extents are skipped, any extents | 
|  | * added are marked as "unwritten". | 
|  | */ | 
|  | static int ocfs2_allocate_unwritten_extents(struct inode *inode, | 
|  | u64 start, u64 len) | 
|  | { | 
|  | int ret; | 
|  | u32 cpos, phys_cpos, clusters, alloc_size; | 
|  | u64 end = start + len; | 
|  | struct buffer_head *di_bh = NULL; | 
|  |  | 
|  | if (OCFS2_I(inode)->ip_dyn_features & OCFS2_INLINE_DATA_FL) { | 
|  | ret = ocfs2_read_block(OCFS2_SB(inode->i_sb), | 
|  | OCFS2_I(inode)->ip_blkno, &di_bh, | 
|  | OCFS2_BH_CACHED, inode); | 
|  | if (ret) { | 
|  | mlog_errno(ret); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Nothing to do if the requested reservation range | 
|  | * fits within the inode. | 
|  | */ | 
|  | if (ocfs2_size_fits_inline_data(di_bh, end)) | 
|  | goto out; | 
|  |  | 
|  | ret = ocfs2_convert_inline_data_to_extents(inode, di_bh); | 
|  | if (ret) { | 
|  | mlog_errno(ret); | 
|  | goto out; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * We consider both start and len to be inclusive. | 
|  | */ | 
|  | cpos = start >> OCFS2_SB(inode->i_sb)->s_clustersize_bits; | 
|  | clusters = ocfs2_clusters_for_bytes(inode->i_sb, start + len); | 
|  | clusters -= cpos; | 
|  |  | 
|  | while (clusters) { | 
|  | ret = ocfs2_get_clusters(inode, cpos, &phys_cpos, | 
|  | &alloc_size, NULL); | 
|  | if (ret) { | 
|  | mlog_errno(ret); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Hole or existing extent len can be arbitrary, so | 
|  | * cap it to our own allocation request. | 
|  | */ | 
|  | if (alloc_size > clusters) | 
|  | alloc_size = clusters; | 
|  |  | 
|  | if (phys_cpos) { | 
|  | /* | 
|  | * We already have an allocation at this | 
|  | * region so we can safely skip it. | 
|  | */ | 
|  | goto next; | 
|  | } | 
|  |  | 
|  | ret = __ocfs2_extend_allocation(inode, cpos, alloc_size, 1); | 
|  | if (ret) { | 
|  | if (ret != -ENOSPC) | 
|  | mlog_errno(ret); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | next: | 
|  | cpos += alloc_size; | 
|  | clusters -= alloc_size; | 
|  | } | 
|  |  | 
|  | ret = 0; | 
|  | out: | 
|  |  | 
|  | brelse(di_bh); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int __ocfs2_remove_inode_range(struct inode *inode, | 
|  | struct buffer_head *di_bh, | 
|  | u32 cpos, u32 phys_cpos, u32 len, | 
|  | struct ocfs2_cached_dealloc_ctxt *dealloc) | 
|  | { | 
|  | int ret; | 
|  | u64 phys_blkno = ocfs2_clusters_to_blocks(inode->i_sb, phys_cpos); | 
|  | struct ocfs2_super *osb = OCFS2_SB(inode->i_sb); | 
|  | struct inode *tl_inode = osb->osb_tl_inode; | 
|  | handle_t *handle; | 
|  | struct ocfs2_alloc_context *meta_ac = NULL; | 
|  | struct ocfs2_dinode *di = (struct ocfs2_dinode *)di_bh->b_data; | 
|  |  | 
|  | ret = ocfs2_lock_allocators(inode, di, 0, 1, NULL, &meta_ac); | 
|  | if (ret) { | 
|  | mlog_errno(ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | mutex_lock(&tl_inode->i_mutex); | 
|  |  | 
|  | if (ocfs2_truncate_log_needs_flush(osb)) { | 
|  | ret = __ocfs2_flush_truncate_log(osb); | 
|  | if (ret < 0) { | 
|  | mlog_errno(ret); | 
|  | goto out; | 
|  | } | 
|  | } | 
|  |  | 
|  | handle = ocfs2_start_trans(osb, OCFS2_REMOVE_EXTENT_CREDITS); | 
|  | if (handle == NULL) { | 
|  | ret = -ENOMEM; | 
|  | mlog_errno(ret); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | ret = ocfs2_journal_access(handle, inode, di_bh, | 
|  | OCFS2_JOURNAL_ACCESS_WRITE); | 
|  | if (ret) { | 
|  | mlog_errno(ret); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | ret = ocfs2_remove_extent(inode, di_bh, cpos, len, handle, meta_ac, | 
|  | dealloc); | 
|  | if (ret) { | 
|  | mlog_errno(ret); | 
|  | goto out_commit; | 
|  | } | 
|  |  | 
|  | OCFS2_I(inode)->ip_clusters -= len; | 
|  | di->i_clusters = cpu_to_le32(OCFS2_I(inode)->ip_clusters); | 
|  |  | 
|  | ret = ocfs2_journal_dirty(handle, di_bh); | 
|  | if (ret) { | 
|  | mlog_errno(ret); | 
|  | goto out_commit; | 
|  | } | 
|  |  | 
|  | ret = ocfs2_truncate_log_append(osb, handle, phys_blkno, len); | 
|  | if (ret) | 
|  | mlog_errno(ret); | 
|  |  | 
|  | out_commit: | 
|  | ocfs2_commit_trans(osb, handle); | 
|  | out: | 
|  | mutex_unlock(&tl_inode->i_mutex); | 
|  |  | 
|  | if (meta_ac) | 
|  | ocfs2_free_alloc_context(meta_ac); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Truncate a byte range, avoiding pages within partial clusters. This | 
|  | * preserves those pages for the zeroing code to write to. | 
|  | */ | 
|  | static void ocfs2_truncate_cluster_pages(struct inode *inode, u64 byte_start, | 
|  | u64 byte_len) | 
|  | { | 
|  | struct ocfs2_super *osb = OCFS2_SB(inode->i_sb); | 
|  | loff_t start, end; | 
|  | struct address_space *mapping = inode->i_mapping; | 
|  |  | 
|  | start = (loff_t)ocfs2_align_bytes_to_clusters(inode->i_sb, byte_start); | 
|  | end = byte_start + byte_len; | 
|  | end = end & ~(osb->s_clustersize - 1); | 
|  |  | 
|  | if (start < end) { | 
|  | unmap_mapping_range(mapping, start, end - start, 0); | 
|  | truncate_inode_pages_range(mapping, start, end - 1); | 
|  | } | 
|  | } | 
|  |  | 
|  | static int ocfs2_zero_partial_clusters(struct inode *inode, | 
|  | u64 start, u64 len) | 
|  | { | 
|  | int ret = 0; | 
|  | u64 tmpend, end = start + len; | 
|  | struct ocfs2_super *osb = OCFS2_SB(inode->i_sb); | 
|  | unsigned int csize = osb->s_clustersize; | 
|  | handle_t *handle; | 
|  |  | 
|  | /* | 
|  | * The "start" and "end" values are NOT necessarily part of | 
|  | * the range whose allocation is being deleted. Rather, this | 
|  | * is what the user passed in with the request. We must zero | 
|  | * partial clusters here. There's no need to worry about | 
|  | * physical allocation - the zeroing code knows to skip holes. | 
|  | */ | 
|  | mlog(0, "byte start: %llu, end: %llu\n", | 
|  | (unsigned long long)start, (unsigned long long)end); | 
|  |  | 
|  | /* | 
|  | * If both edges are on a cluster boundary then there's no | 
|  | * zeroing required as the region is part of the allocation to | 
|  | * be truncated. | 
|  | */ | 
|  | if ((start & (csize - 1)) == 0 && (end & (csize - 1)) == 0) | 
|  | goto out; | 
|  |  | 
|  | handle = ocfs2_start_trans(osb, OCFS2_INODE_UPDATE_CREDITS); | 
|  | if (handle == NULL) { | 
|  | ret = -ENOMEM; | 
|  | mlog_errno(ret); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * We want to get the byte offset of the end of the 1st cluster. | 
|  | */ | 
|  | tmpend = (u64)osb->s_clustersize + (start & ~(osb->s_clustersize - 1)); | 
|  | if (tmpend > end) | 
|  | tmpend = end; | 
|  |  | 
|  | mlog(0, "1st range: start: %llu, tmpend: %llu\n", | 
|  | (unsigned long long)start, (unsigned long long)tmpend); | 
|  |  | 
|  | ret = ocfs2_zero_range_for_truncate(inode, handle, start, tmpend); | 
|  | if (ret) | 
|  | mlog_errno(ret); | 
|  |  | 
|  | if (tmpend < end) { | 
|  | /* | 
|  | * This may make start and end equal, but the zeroing | 
|  | * code will skip any work in that case so there's no | 
|  | * need to catch it up here. | 
|  | */ | 
|  | start = end & ~(osb->s_clustersize - 1); | 
|  |  | 
|  | mlog(0, "2nd range: start: %llu, end: %llu\n", | 
|  | (unsigned long long)start, (unsigned long long)end); | 
|  |  | 
|  | ret = ocfs2_zero_range_for_truncate(inode, handle, start, end); | 
|  | if (ret) | 
|  | mlog_errno(ret); | 
|  | } | 
|  |  | 
|  | ocfs2_commit_trans(osb, handle); | 
|  | out: | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int ocfs2_remove_inode_range(struct inode *inode, | 
|  | struct buffer_head *di_bh, u64 byte_start, | 
|  | u64 byte_len) | 
|  | { | 
|  | int ret = 0; | 
|  | u32 trunc_start, trunc_len, cpos, phys_cpos, alloc_size; | 
|  | struct ocfs2_super *osb = OCFS2_SB(inode->i_sb); | 
|  | struct ocfs2_cached_dealloc_ctxt dealloc; | 
|  | struct address_space *mapping = inode->i_mapping; | 
|  |  | 
|  | ocfs2_init_dealloc_ctxt(&dealloc); | 
|  |  | 
|  | if (byte_len == 0) | 
|  | return 0; | 
|  |  | 
|  | if (OCFS2_I(inode)->ip_dyn_features & OCFS2_INLINE_DATA_FL) { | 
|  | ret = ocfs2_truncate_inline(inode, di_bh, byte_start, | 
|  | byte_start + byte_len, 0); | 
|  | if (ret) { | 
|  | mlog_errno(ret); | 
|  | goto out; | 
|  | } | 
|  | /* | 
|  | * There's no need to get fancy with the page cache | 
|  | * truncate of an inline-data inode. We're talking | 
|  | * about less than a page here, which will be cached | 
|  | * in the dinode buffer anyway. | 
|  | */ | 
|  | unmap_mapping_range(mapping, 0, 0, 0); | 
|  | truncate_inode_pages(mapping, 0); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | trunc_start = ocfs2_clusters_for_bytes(osb->sb, byte_start); | 
|  | trunc_len = (byte_start + byte_len) >> osb->s_clustersize_bits; | 
|  | if (trunc_len >= trunc_start) | 
|  | trunc_len -= trunc_start; | 
|  | else | 
|  | trunc_len = 0; | 
|  |  | 
|  | mlog(0, "Inode: %llu, start: %llu, len: %llu, cstart: %u, clen: %u\n", | 
|  | (unsigned long long)OCFS2_I(inode)->ip_blkno, | 
|  | (unsigned long long)byte_start, | 
|  | (unsigned long long)byte_len, trunc_start, trunc_len); | 
|  |  | 
|  | ret = ocfs2_zero_partial_clusters(inode, byte_start, byte_len); | 
|  | if (ret) { | 
|  | mlog_errno(ret); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | cpos = trunc_start; | 
|  | while (trunc_len) { | 
|  | ret = ocfs2_get_clusters(inode, cpos, &phys_cpos, | 
|  | &alloc_size, NULL); | 
|  | if (ret) { | 
|  | mlog_errno(ret); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if (alloc_size > trunc_len) | 
|  | alloc_size = trunc_len; | 
|  |  | 
|  | /* Only do work for non-holes */ | 
|  | if (phys_cpos != 0) { | 
|  | ret = __ocfs2_remove_inode_range(inode, di_bh, cpos, | 
|  | phys_cpos, alloc_size, | 
|  | &dealloc); | 
|  | if (ret) { | 
|  | mlog_errno(ret); | 
|  | goto out; | 
|  | } | 
|  | } | 
|  |  | 
|  | cpos += alloc_size; | 
|  | trunc_len -= alloc_size; | 
|  | } | 
|  |  | 
|  | ocfs2_truncate_cluster_pages(inode, byte_start, byte_len); | 
|  |  | 
|  | out: | 
|  | ocfs2_schedule_truncate_log_flush(osb, 1); | 
|  | ocfs2_run_deallocs(osb, &dealloc); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Parts of this function taken from xfs_change_file_space() | 
|  | */ | 
|  | static int __ocfs2_change_file_space(struct file *file, struct inode *inode, | 
|  | loff_t f_pos, unsigned int cmd, | 
|  | struct ocfs2_space_resv *sr, | 
|  | int change_size) | 
|  | { | 
|  | int ret; | 
|  | s64 llen; | 
|  | loff_t size; | 
|  | struct ocfs2_super *osb = OCFS2_SB(inode->i_sb); | 
|  | struct buffer_head *di_bh = NULL; | 
|  | handle_t *handle; | 
|  | unsigned long long max_off = inode->i_sb->s_maxbytes; | 
|  |  | 
|  | if (ocfs2_is_hard_readonly(osb) || ocfs2_is_soft_readonly(osb)) | 
|  | return -EROFS; | 
|  |  | 
|  | mutex_lock(&inode->i_mutex); | 
|  |  | 
|  | /* | 
|  | * This prevents concurrent writes on other nodes | 
|  | */ | 
|  | ret = ocfs2_rw_lock(inode, 1); | 
|  | if (ret) { | 
|  | mlog_errno(ret); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | ret = ocfs2_meta_lock(inode, &di_bh, 1); | 
|  | if (ret) { | 
|  | mlog_errno(ret); | 
|  | goto out_rw_unlock; | 
|  | } | 
|  |  | 
|  | if (inode->i_flags & (S_IMMUTABLE|S_APPEND)) { | 
|  | ret = -EPERM; | 
|  | goto out_meta_unlock; | 
|  | } | 
|  |  | 
|  | switch (sr->l_whence) { | 
|  | case 0: /*SEEK_SET*/ | 
|  | break; | 
|  | case 1: /*SEEK_CUR*/ | 
|  | sr->l_start += f_pos; | 
|  | break; | 
|  | case 2: /*SEEK_END*/ | 
|  | sr->l_start += i_size_read(inode); | 
|  | break; | 
|  | default: | 
|  | ret = -EINVAL; | 
|  | goto out_meta_unlock; | 
|  | } | 
|  | sr->l_whence = 0; | 
|  |  | 
|  | llen = sr->l_len > 0 ? sr->l_len - 1 : sr->l_len; | 
|  |  | 
|  | if (sr->l_start < 0 | 
|  | || sr->l_start > max_off | 
|  | || (sr->l_start + llen) < 0 | 
|  | || (sr->l_start + llen) > max_off) { | 
|  | ret = -EINVAL; | 
|  | goto out_meta_unlock; | 
|  | } | 
|  | size = sr->l_start + sr->l_len; | 
|  |  | 
|  | if (cmd == OCFS2_IOC_RESVSP || cmd == OCFS2_IOC_RESVSP64) { | 
|  | if (sr->l_len <= 0) { | 
|  | ret = -EINVAL; | 
|  | goto out_meta_unlock; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (file && should_remove_suid(file->f_path.dentry)) { | 
|  | ret = __ocfs2_write_remove_suid(inode, di_bh); | 
|  | if (ret) { | 
|  | mlog_errno(ret); | 
|  | goto out_meta_unlock; | 
|  | } | 
|  | } | 
|  |  | 
|  | down_write(&OCFS2_I(inode)->ip_alloc_sem); | 
|  | switch (cmd) { | 
|  | case OCFS2_IOC_RESVSP: | 
|  | case OCFS2_IOC_RESVSP64: | 
|  | /* | 
|  | * This takes unsigned offsets, but the signed ones we | 
|  | * pass have been checked against overflow above. | 
|  | */ | 
|  | ret = ocfs2_allocate_unwritten_extents(inode, sr->l_start, | 
|  | sr->l_len); | 
|  | break; | 
|  | case OCFS2_IOC_UNRESVSP: | 
|  | case OCFS2_IOC_UNRESVSP64: | 
|  | ret = ocfs2_remove_inode_range(inode, di_bh, sr->l_start, | 
|  | sr->l_len); | 
|  | break; | 
|  | default: | 
|  | ret = -EINVAL; | 
|  | } | 
|  | up_write(&OCFS2_I(inode)->ip_alloc_sem); | 
|  | if (ret) { | 
|  | mlog_errno(ret); | 
|  | goto out_meta_unlock; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * We update c/mtime for these changes | 
|  | */ | 
|  | handle = ocfs2_start_trans(osb, OCFS2_INODE_UPDATE_CREDITS); | 
|  | if (IS_ERR(handle)) { | 
|  | ret = PTR_ERR(handle); | 
|  | mlog_errno(ret); | 
|  | goto out_meta_unlock; | 
|  | } | 
|  |  | 
|  | if (change_size && i_size_read(inode) < size) | 
|  | i_size_write(inode, size); | 
|  |  | 
|  | inode->i_ctime = inode->i_mtime = CURRENT_TIME; | 
|  | ret = ocfs2_mark_inode_dirty(handle, inode, di_bh); | 
|  | if (ret < 0) | 
|  | mlog_errno(ret); | 
|  |  | 
|  | ocfs2_commit_trans(osb, handle); | 
|  |  | 
|  | out_meta_unlock: | 
|  | brelse(di_bh); | 
|  | ocfs2_meta_unlock(inode, 1); | 
|  | out_rw_unlock: | 
|  | ocfs2_rw_unlock(inode, 1); | 
|  |  | 
|  | mutex_unlock(&inode->i_mutex); | 
|  | out: | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | int ocfs2_change_file_space(struct file *file, unsigned int cmd, | 
|  | struct ocfs2_space_resv *sr) | 
|  | { | 
|  | struct inode *inode = file->f_path.dentry->d_inode; | 
|  | struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);; | 
|  |  | 
|  | if ((cmd == OCFS2_IOC_RESVSP || cmd == OCFS2_IOC_RESVSP64) && | 
|  | !ocfs2_writes_unwritten_extents(osb)) | 
|  | return -ENOTTY; | 
|  | else if ((cmd == OCFS2_IOC_UNRESVSP || cmd == OCFS2_IOC_UNRESVSP64) && | 
|  | !ocfs2_sparse_alloc(osb)) | 
|  | return -ENOTTY; | 
|  |  | 
|  | if (!S_ISREG(inode->i_mode)) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (!(file->f_mode & FMODE_WRITE)) | 
|  | return -EBADF; | 
|  |  | 
|  | return __ocfs2_change_file_space(file, inode, file->f_pos, cmd, sr, 0); | 
|  | } | 
|  |  | 
|  | static long ocfs2_fallocate(struct inode *inode, int mode, loff_t offset, | 
|  | loff_t len) | 
|  | { | 
|  | struct ocfs2_super *osb = OCFS2_SB(inode->i_sb); | 
|  | struct ocfs2_space_resv sr; | 
|  | int change_size = 1; | 
|  |  | 
|  | if (!ocfs2_writes_unwritten_extents(osb)) | 
|  | return -EOPNOTSUPP; | 
|  |  | 
|  | if (S_ISDIR(inode->i_mode)) | 
|  | return -ENODEV; | 
|  |  | 
|  | if (mode & FALLOC_FL_KEEP_SIZE) | 
|  | change_size = 0; | 
|  |  | 
|  | sr.l_whence = 0; | 
|  | sr.l_start = (s64)offset; | 
|  | sr.l_len = (s64)len; | 
|  |  | 
|  | return __ocfs2_change_file_space(NULL, inode, offset, | 
|  | OCFS2_IOC_RESVSP64, &sr, change_size); | 
|  | } | 
|  |  | 
|  | static int ocfs2_prepare_inode_for_write(struct dentry *dentry, | 
|  | loff_t *ppos, | 
|  | size_t count, | 
|  | int appending, | 
|  | int *direct_io) | 
|  | { | 
|  | int ret = 0, meta_level = 0; | 
|  | struct inode *inode = dentry->d_inode; | 
|  | loff_t saved_pos, end; | 
|  |  | 
|  | /* | 
|  | * We start with a read level meta lock and only jump to an ex | 
|  | * if we need to make modifications here. | 
|  | */ | 
|  | for(;;) { | 
|  | ret = ocfs2_meta_lock(inode, NULL, meta_level); | 
|  | if (ret < 0) { | 
|  | meta_level = -1; | 
|  | mlog_errno(ret); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | /* Clear suid / sgid if necessary. We do this here | 
|  | * instead of later in the write path because | 
|  | * remove_suid() calls ->setattr without any hint that | 
|  | * we may have already done our cluster locking. Since | 
|  | * ocfs2_setattr() *must* take cluster locks to | 
|  | * proceeed, this will lead us to recursively lock the | 
|  | * inode. There's also the dinode i_size state which | 
|  | * can be lost via setattr during extending writes (we | 
|  | * set inode->i_size at the end of a write. */ | 
|  | if (should_remove_suid(dentry)) { | 
|  | if (meta_level == 0) { | 
|  | ocfs2_meta_unlock(inode, meta_level); | 
|  | meta_level = 1; | 
|  | continue; | 
|  | } | 
|  |  | 
|  | ret = ocfs2_write_remove_suid(inode); | 
|  | if (ret < 0) { | 
|  | mlog_errno(ret); | 
|  | goto out_unlock; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* work on a copy of ppos until we're sure that we won't have | 
|  | * to recalculate it due to relocking. */ | 
|  | if (appending) { | 
|  | saved_pos = i_size_read(inode); | 
|  | mlog(0, "O_APPEND: inode->i_size=%llu\n", saved_pos); | 
|  | } else { | 
|  | saved_pos = *ppos; | 
|  | } | 
|  |  | 
|  | end = saved_pos + count; | 
|  |  | 
|  | /* | 
|  | * Skip the O_DIRECT checks if we don't need | 
|  | * them. | 
|  | */ | 
|  | if (!direct_io || !(*direct_io)) | 
|  | break; | 
|  |  | 
|  | /* | 
|  | * There's no sane way to do direct writes to an inode | 
|  | * with inline data. | 
|  | */ | 
|  | if (OCFS2_I(inode)->ip_dyn_features & OCFS2_INLINE_DATA_FL) { | 
|  | *direct_io = 0; | 
|  | break; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Allowing concurrent direct writes means | 
|  | * i_size changes wouldn't be synchronized, so | 
|  | * one node could wind up truncating another | 
|  | * nodes writes. | 
|  | */ | 
|  | if (end > i_size_read(inode)) { | 
|  | *direct_io = 0; | 
|  | break; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * We don't fill holes during direct io, so | 
|  | * check for them here. If any are found, the | 
|  | * caller will have to retake some cluster | 
|  | * locks and initiate the io as buffered. | 
|  | */ | 
|  | ret = ocfs2_check_range_for_holes(inode, saved_pos, count); | 
|  | if (ret == 1) { | 
|  | *direct_io = 0; | 
|  | ret = 0; | 
|  | } else if (ret < 0) | 
|  | mlog_errno(ret); | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (appending) | 
|  | *ppos = saved_pos; | 
|  |  | 
|  | out_unlock: | 
|  | ocfs2_meta_unlock(inode, meta_level); | 
|  |  | 
|  | out: | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static ssize_t ocfs2_file_aio_write(struct kiocb *iocb, | 
|  | const struct iovec *iov, | 
|  | unsigned long nr_segs, | 
|  | loff_t pos) | 
|  | { | 
|  | int ret, direct_io, appending, rw_level, have_alloc_sem  = 0; | 
|  | int can_do_direct; | 
|  | ssize_t written = 0; | 
|  | size_t ocount;		/* original count */ | 
|  | size_t count;		/* after file limit checks */ | 
|  | loff_t old_size, *ppos = &iocb->ki_pos; | 
|  | u32 old_clusters; | 
|  | struct file *file = iocb->ki_filp; | 
|  | struct inode *inode = file->f_path.dentry->d_inode; | 
|  | struct ocfs2_super *osb = OCFS2_SB(inode->i_sb); | 
|  |  | 
|  | mlog_entry("(0x%p, %u, '%.*s')\n", file, | 
|  | (unsigned int)nr_segs, | 
|  | file->f_path.dentry->d_name.len, | 
|  | file->f_path.dentry->d_name.name); | 
|  |  | 
|  | if (iocb->ki_left == 0) | 
|  | return 0; | 
|  |  | 
|  | vfs_check_frozen(inode->i_sb, SB_FREEZE_WRITE); | 
|  |  | 
|  | appending = file->f_flags & O_APPEND ? 1 : 0; | 
|  | direct_io = file->f_flags & O_DIRECT ? 1 : 0; | 
|  |  | 
|  | mutex_lock(&inode->i_mutex); | 
|  |  | 
|  | relock: | 
|  | /* to match setattr's i_mutex -> i_alloc_sem -> rw_lock ordering */ | 
|  | if (direct_io) { | 
|  | down_read(&inode->i_alloc_sem); | 
|  | have_alloc_sem = 1; | 
|  | } | 
|  |  | 
|  | /* concurrent O_DIRECT writes are allowed */ | 
|  | rw_level = !direct_io; | 
|  | ret = ocfs2_rw_lock(inode, rw_level); | 
|  | if (ret < 0) { | 
|  | mlog_errno(ret); | 
|  | goto out_sems; | 
|  | } | 
|  |  | 
|  | can_do_direct = direct_io; | 
|  | ret = ocfs2_prepare_inode_for_write(file->f_path.dentry, ppos, | 
|  | iocb->ki_left, appending, | 
|  | &can_do_direct); | 
|  | if (ret < 0) { | 
|  | mlog_errno(ret); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * We can't complete the direct I/O as requested, fall back to | 
|  | * buffered I/O. | 
|  | */ | 
|  | if (direct_io && !can_do_direct) { | 
|  | ocfs2_rw_unlock(inode, rw_level); | 
|  | up_read(&inode->i_alloc_sem); | 
|  |  | 
|  | have_alloc_sem = 0; | 
|  | rw_level = -1; | 
|  |  | 
|  | direct_io = 0; | 
|  | goto relock; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * To later detect whether a journal commit for sync writes is | 
|  | * necessary, we sample i_size, and cluster count here. | 
|  | */ | 
|  | old_size = i_size_read(inode); | 
|  | old_clusters = OCFS2_I(inode)->ip_clusters; | 
|  |  | 
|  | /* communicate with ocfs2_dio_end_io */ | 
|  | ocfs2_iocb_set_rw_locked(iocb, rw_level); | 
|  |  | 
|  | if (direct_io) { | 
|  | ret = generic_segment_checks(iov, &nr_segs, &ocount, | 
|  | VERIFY_READ); | 
|  | if (ret) | 
|  | goto out_dio; | 
|  |  | 
|  | ret = generic_write_checks(file, ppos, &count, | 
|  | S_ISBLK(inode->i_mode)); | 
|  | if (ret) | 
|  | goto out_dio; | 
|  |  | 
|  | written = generic_file_direct_write(iocb, iov, &nr_segs, *ppos, | 
|  | ppos, count, ocount); | 
|  | if (written < 0) { | 
|  | ret = written; | 
|  | goto out_dio; | 
|  | } | 
|  | } else { | 
|  | written = generic_file_aio_write_nolock(iocb, iov, nr_segs, | 
|  | *ppos); | 
|  | } | 
|  |  | 
|  | out_dio: | 
|  | /* buffered aio wouldn't have proper lock coverage today */ | 
|  | BUG_ON(ret == -EIOCBQUEUED && !(file->f_flags & O_DIRECT)); | 
|  |  | 
|  | if ((file->f_flags & O_SYNC && !direct_io) || IS_SYNC(inode)) { | 
|  | /* | 
|  | * The generic write paths have handled getting data | 
|  | * to disk, but since we don't make use of the dirty | 
|  | * inode list, a manual journal commit is necessary | 
|  | * here. | 
|  | */ | 
|  | if (old_size != i_size_read(inode) || | 
|  | old_clusters != OCFS2_I(inode)->ip_clusters) { | 
|  | ret = journal_force_commit(osb->journal->j_journal); | 
|  | if (ret < 0) | 
|  | written = ret; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * deep in g_f_a_w_n()->ocfs2_direct_IO we pass in a ocfs2_dio_end_io | 
|  | * function pointer which is called when o_direct io completes so that | 
|  | * it can unlock our rw lock.  (it's the clustered equivalent of | 
|  | * i_alloc_sem; protects truncate from racing with pending ios). | 
|  | * Unfortunately there are error cases which call end_io and others | 
|  | * that don't.  so we don't have to unlock the rw_lock if either an | 
|  | * async dio is going to do it in the future or an end_io after an | 
|  | * error has already done it. | 
|  | */ | 
|  | if (ret == -EIOCBQUEUED || !ocfs2_iocb_is_rw_locked(iocb)) { | 
|  | rw_level = -1; | 
|  | have_alloc_sem = 0; | 
|  | } | 
|  |  | 
|  | out: | 
|  | if (rw_level != -1) | 
|  | ocfs2_rw_unlock(inode, rw_level); | 
|  |  | 
|  | out_sems: | 
|  | if (have_alloc_sem) | 
|  | up_read(&inode->i_alloc_sem); | 
|  |  | 
|  | mutex_unlock(&inode->i_mutex); | 
|  |  | 
|  | mlog_exit(ret); | 
|  | return written ? written : ret; | 
|  | } | 
|  |  | 
|  | static ssize_t ocfs2_file_splice_write(struct pipe_inode_info *pipe, | 
|  | struct file *out, | 
|  | loff_t *ppos, | 
|  | size_t len, | 
|  | unsigned int flags) | 
|  | { | 
|  | int ret; | 
|  | struct inode *inode = out->f_path.dentry->d_inode; | 
|  |  | 
|  | mlog_entry("(0x%p, 0x%p, %u, '%.*s')\n", out, pipe, | 
|  | (unsigned int)len, | 
|  | out->f_path.dentry->d_name.len, | 
|  | out->f_path.dentry->d_name.name); | 
|  |  | 
|  | inode_double_lock(inode, pipe->inode); | 
|  |  | 
|  | ret = ocfs2_rw_lock(inode, 1); | 
|  | if (ret < 0) { | 
|  | mlog_errno(ret); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | ret = ocfs2_prepare_inode_for_write(out->f_path.dentry, ppos, len, 0, | 
|  | NULL); | 
|  | if (ret < 0) { | 
|  | mlog_errno(ret); | 
|  | goto out_unlock; | 
|  | } | 
|  |  | 
|  | ret = generic_file_splice_write_nolock(pipe, out, ppos, len, flags); | 
|  |  | 
|  | out_unlock: | 
|  | ocfs2_rw_unlock(inode, 1); | 
|  | out: | 
|  | inode_double_unlock(inode, pipe->inode); | 
|  |  | 
|  | mlog_exit(ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static ssize_t ocfs2_file_splice_read(struct file *in, | 
|  | loff_t *ppos, | 
|  | struct pipe_inode_info *pipe, | 
|  | size_t len, | 
|  | unsigned int flags) | 
|  | { | 
|  | int ret = 0; | 
|  | struct inode *inode = in->f_path.dentry->d_inode; | 
|  |  | 
|  | mlog_entry("(0x%p, 0x%p, %u, '%.*s')\n", in, pipe, | 
|  | (unsigned int)len, | 
|  | in->f_path.dentry->d_name.len, | 
|  | in->f_path.dentry->d_name.name); | 
|  |  | 
|  | /* | 
|  | * See the comment in ocfs2_file_aio_read() | 
|  | */ | 
|  | ret = ocfs2_meta_lock(inode, NULL, 0); | 
|  | if (ret < 0) { | 
|  | mlog_errno(ret); | 
|  | goto bail; | 
|  | } | 
|  | ocfs2_meta_unlock(inode, 0); | 
|  |  | 
|  | ret = generic_file_splice_read(in, ppos, pipe, len, flags); | 
|  |  | 
|  | bail: | 
|  | mlog_exit(ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static ssize_t ocfs2_file_aio_read(struct kiocb *iocb, | 
|  | const struct iovec *iov, | 
|  | unsigned long nr_segs, | 
|  | loff_t pos) | 
|  | { | 
|  | int ret = 0, rw_level = -1, have_alloc_sem = 0, lock_level = 0; | 
|  | struct file *filp = iocb->ki_filp; | 
|  | struct inode *inode = filp->f_path.dentry->d_inode; | 
|  |  | 
|  | mlog_entry("(0x%p, %u, '%.*s')\n", filp, | 
|  | (unsigned int)nr_segs, | 
|  | filp->f_path.dentry->d_name.len, | 
|  | filp->f_path.dentry->d_name.name); | 
|  |  | 
|  | if (!inode) { | 
|  | ret = -EINVAL; | 
|  | mlog_errno(ret); | 
|  | goto bail; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * buffered reads protect themselves in ->readpage().  O_DIRECT reads | 
|  | * need locks to protect pending reads from racing with truncate. | 
|  | */ | 
|  | if (filp->f_flags & O_DIRECT) { | 
|  | down_read(&inode->i_alloc_sem); | 
|  | have_alloc_sem = 1; | 
|  |  | 
|  | ret = ocfs2_rw_lock(inode, 0); | 
|  | if (ret < 0) { | 
|  | mlog_errno(ret); | 
|  | goto bail; | 
|  | } | 
|  | rw_level = 0; | 
|  | /* communicate with ocfs2_dio_end_io */ | 
|  | ocfs2_iocb_set_rw_locked(iocb, rw_level); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * We're fine letting folks race truncates and extending | 
|  | * writes with read across the cluster, just like they can | 
|  | * locally. Hence no rw_lock during read. | 
|  | * | 
|  | * Take and drop the meta data lock to update inode fields | 
|  | * like i_size. This allows the checks down below | 
|  | * generic_file_aio_read() a chance of actually working. | 
|  | */ | 
|  | ret = ocfs2_meta_lock_atime(inode, filp->f_vfsmnt, &lock_level); | 
|  | if (ret < 0) { | 
|  | mlog_errno(ret); | 
|  | goto bail; | 
|  | } | 
|  | ocfs2_meta_unlock(inode, lock_level); | 
|  |  | 
|  | ret = generic_file_aio_read(iocb, iov, nr_segs, iocb->ki_pos); | 
|  | if (ret == -EINVAL) | 
|  | mlog(ML_ERROR, "generic_file_aio_read returned -EINVAL\n"); | 
|  |  | 
|  | /* buffered aio wouldn't have proper lock coverage today */ | 
|  | BUG_ON(ret == -EIOCBQUEUED && !(filp->f_flags & O_DIRECT)); | 
|  |  | 
|  | /* see ocfs2_file_aio_write */ | 
|  | if (ret == -EIOCBQUEUED || !ocfs2_iocb_is_rw_locked(iocb)) { | 
|  | rw_level = -1; | 
|  | have_alloc_sem = 0; | 
|  | } | 
|  |  | 
|  | bail: | 
|  | if (have_alloc_sem) | 
|  | up_read(&inode->i_alloc_sem); | 
|  | if (rw_level != -1) | 
|  | ocfs2_rw_unlock(inode, rw_level); | 
|  | mlog_exit(ret); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | const struct inode_operations ocfs2_file_iops = { | 
|  | .setattr	= ocfs2_setattr, | 
|  | .getattr	= ocfs2_getattr, | 
|  | .permission	= ocfs2_permission, | 
|  | .fallocate	= ocfs2_fallocate, | 
|  | }; | 
|  |  | 
|  | const struct inode_operations ocfs2_special_file_iops = { | 
|  | .setattr	= ocfs2_setattr, | 
|  | .getattr	= ocfs2_getattr, | 
|  | .permission	= ocfs2_permission, | 
|  | }; | 
|  |  | 
|  | const struct file_operations ocfs2_fops = { | 
|  | .read		= do_sync_read, | 
|  | .write		= do_sync_write, | 
|  | .mmap		= ocfs2_mmap, | 
|  | .fsync		= ocfs2_sync_file, | 
|  | .release	= ocfs2_file_release, | 
|  | .open		= ocfs2_file_open, | 
|  | .aio_read	= ocfs2_file_aio_read, | 
|  | .aio_write	= ocfs2_file_aio_write, | 
|  | .ioctl		= ocfs2_ioctl, | 
|  | #ifdef CONFIG_COMPAT | 
|  | .compat_ioctl   = ocfs2_compat_ioctl, | 
|  | #endif | 
|  | .splice_read	= ocfs2_file_splice_read, | 
|  | .splice_write	= ocfs2_file_splice_write, | 
|  | }; | 
|  |  | 
|  | const struct file_operations ocfs2_dops = { | 
|  | .read		= generic_read_dir, | 
|  | .readdir	= ocfs2_readdir, | 
|  | .fsync		= ocfs2_sync_file, | 
|  | .ioctl		= ocfs2_ioctl, | 
|  | #ifdef CONFIG_COMPAT | 
|  | .compat_ioctl   = ocfs2_compat_ioctl, | 
|  | #endif | 
|  | }; |