| /* | 
 |  * arch/arm/mach-at91/at91sam9rl.c | 
 |  * | 
 |  *  Copyright (C) 2005 SAN People | 
 |  *  Copyright (C) 2007 Atmel Corporation | 
 |  * | 
 |  * This file is subject to the terms and conditions of the GNU General Public | 
 |  * License.  See the file COPYING in the main directory of this archive for | 
 |  * more details. | 
 |  */ | 
 |  | 
 | #include <linux/module.h> | 
 | #include <linux/pm.h> | 
 |  | 
 | #include <asm/irq.h> | 
 | #include <asm/mach/arch.h> | 
 | #include <asm/mach/map.h> | 
 | #include <mach/cpu.h> | 
 | #include <mach/at91sam9rl.h> | 
 | #include <mach/at91_pmc.h> | 
 | #include <mach/at91_rstc.h> | 
 | #include <mach/at91_shdwc.h> | 
 |  | 
 | #include "generic.h" | 
 | #include "clock.h" | 
 |  | 
 | static struct map_desc at91sam9rl_io_desc[] __initdata = { | 
 | 	{ | 
 | 		.virtual	= AT91_VA_BASE_SYS, | 
 | 		.pfn		= __phys_to_pfn(AT91_BASE_SYS), | 
 | 		.length		= SZ_16K, | 
 | 		.type		= MT_DEVICE, | 
 | 	}, | 
 | }; | 
 |  | 
 | static struct map_desc at91sam9rl_sram_desc[] __initdata = { | 
 | 	{ | 
 | 		.pfn		= __phys_to_pfn(AT91SAM9RL_SRAM_BASE), | 
 | 		.type		= MT_DEVICE, | 
 | 	} | 
 | }; | 
 |  | 
 | /* -------------------------------------------------------------------- | 
 |  *  Clocks | 
 |  * -------------------------------------------------------------------- */ | 
 |  | 
 | /* | 
 |  * The peripheral clocks. | 
 |  */ | 
 | static struct clk pioA_clk = { | 
 | 	.name		= "pioA_clk", | 
 | 	.pmc_mask	= 1 << AT91SAM9RL_ID_PIOA, | 
 | 	.type		= CLK_TYPE_PERIPHERAL, | 
 | }; | 
 | static struct clk pioB_clk = { | 
 | 	.name		= "pioB_clk", | 
 | 	.pmc_mask	= 1 << AT91SAM9RL_ID_PIOB, | 
 | 	.type		= CLK_TYPE_PERIPHERAL, | 
 | }; | 
 | static struct clk pioC_clk = { | 
 | 	.name		= "pioC_clk", | 
 | 	.pmc_mask	= 1 << AT91SAM9RL_ID_PIOC, | 
 | 	.type		= CLK_TYPE_PERIPHERAL, | 
 | }; | 
 | static struct clk pioD_clk = { | 
 | 	.name		= "pioD_clk", | 
 | 	.pmc_mask	= 1 << AT91SAM9RL_ID_PIOD, | 
 | 	.type		= CLK_TYPE_PERIPHERAL, | 
 | }; | 
 | static struct clk usart0_clk = { | 
 | 	.name		= "usart0_clk", | 
 | 	.pmc_mask	= 1 << AT91SAM9RL_ID_US0, | 
 | 	.type		= CLK_TYPE_PERIPHERAL, | 
 | }; | 
 | static struct clk usart1_clk = { | 
 | 	.name		= "usart1_clk", | 
 | 	.pmc_mask	= 1 << AT91SAM9RL_ID_US1, | 
 | 	.type		= CLK_TYPE_PERIPHERAL, | 
 | }; | 
 | static struct clk usart2_clk = { | 
 | 	.name		= "usart2_clk", | 
 | 	.pmc_mask	= 1 << AT91SAM9RL_ID_US2, | 
 | 	.type		= CLK_TYPE_PERIPHERAL, | 
 | }; | 
 | static struct clk usart3_clk = { | 
 | 	.name		= "usart3_clk", | 
 | 	.pmc_mask	= 1 << AT91SAM9RL_ID_US3, | 
 | 	.type		= CLK_TYPE_PERIPHERAL, | 
 | }; | 
 | static struct clk mmc_clk = { | 
 | 	.name		= "mci_clk", | 
 | 	.pmc_mask	= 1 << AT91SAM9RL_ID_MCI, | 
 | 	.type		= CLK_TYPE_PERIPHERAL, | 
 | }; | 
 | static struct clk twi0_clk = { | 
 | 	.name		= "twi0_clk", | 
 | 	.pmc_mask	= 1 << AT91SAM9RL_ID_TWI0, | 
 | 	.type		= CLK_TYPE_PERIPHERAL, | 
 | }; | 
 | static struct clk twi1_clk = { | 
 | 	.name		= "twi1_clk", | 
 | 	.pmc_mask	= 1 << AT91SAM9RL_ID_TWI1, | 
 | 	.type		= CLK_TYPE_PERIPHERAL, | 
 | }; | 
 | static struct clk spi_clk = { | 
 | 	.name		= "spi_clk", | 
 | 	.pmc_mask	= 1 << AT91SAM9RL_ID_SPI, | 
 | 	.type		= CLK_TYPE_PERIPHERAL, | 
 | }; | 
 | static struct clk ssc0_clk = { | 
 | 	.name		= "ssc0_clk", | 
 | 	.pmc_mask	= 1 << AT91SAM9RL_ID_SSC0, | 
 | 	.type		= CLK_TYPE_PERIPHERAL, | 
 | }; | 
 | static struct clk ssc1_clk = { | 
 | 	.name		= "ssc1_clk", | 
 | 	.pmc_mask	= 1 << AT91SAM9RL_ID_SSC1, | 
 | 	.type		= CLK_TYPE_PERIPHERAL, | 
 | }; | 
 | static struct clk tc0_clk = { | 
 | 	.name		= "tc0_clk", | 
 | 	.pmc_mask	= 1 << AT91SAM9RL_ID_TC0, | 
 | 	.type		= CLK_TYPE_PERIPHERAL, | 
 | }; | 
 | static struct clk tc1_clk = { | 
 | 	.name		= "tc1_clk", | 
 | 	.pmc_mask	= 1 << AT91SAM9RL_ID_TC1, | 
 | 	.type		= CLK_TYPE_PERIPHERAL, | 
 | }; | 
 | static struct clk tc2_clk = { | 
 | 	.name		= "tc2_clk", | 
 | 	.pmc_mask	= 1 << AT91SAM9RL_ID_TC2, | 
 | 	.type		= CLK_TYPE_PERIPHERAL, | 
 | }; | 
 | static struct clk pwm_clk = { | 
 | 	.name		= "pwm_clk", | 
 | 	.pmc_mask	= 1 << AT91SAM9RL_ID_PWMC, | 
 | 	.type		= CLK_TYPE_PERIPHERAL, | 
 | }; | 
 | static struct clk tsc_clk = { | 
 | 	.name		= "tsc_clk", | 
 | 	.pmc_mask	= 1 << AT91SAM9RL_ID_TSC, | 
 | 	.type		= CLK_TYPE_PERIPHERAL, | 
 | }; | 
 | static struct clk dma_clk = { | 
 | 	.name		= "dma_clk", | 
 | 	.pmc_mask	= 1 << AT91SAM9RL_ID_DMA, | 
 | 	.type		= CLK_TYPE_PERIPHERAL, | 
 | }; | 
 | static struct clk udphs_clk = { | 
 | 	.name		= "udphs_clk", | 
 | 	.pmc_mask	= 1 << AT91SAM9RL_ID_UDPHS, | 
 | 	.type		= CLK_TYPE_PERIPHERAL, | 
 | }; | 
 | static struct clk lcdc_clk = { | 
 | 	.name		= "lcdc_clk", | 
 | 	.pmc_mask	= 1 << AT91SAM9RL_ID_LCDC, | 
 | 	.type		= CLK_TYPE_PERIPHERAL, | 
 | }; | 
 | static struct clk ac97_clk = { | 
 | 	.name		= "ac97_clk", | 
 | 	.pmc_mask	= 1 << AT91SAM9RL_ID_AC97C, | 
 | 	.type		= CLK_TYPE_PERIPHERAL, | 
 | }; | 
 |  | 
 | static struct clk *periph_clocks[] __initdata = { | 
 | 	&pioA_clk, | 
 | 	&pioB_clk, | 
 | 	&pioC_clk, | 
 | 	&pioD_clk, | 
 | 	&usart0_clk, | 
 | 	&usart1_clk, | 
 | 	&usart2_clk, | 
 | 	&usart3_clk, | 
 | 	&mmc_clk, | 
 | 	&twi0_clk, | 
 | 	&twi1_clk, | 
 | 	&spi_clk, | 
 | 	&ssc0_clk, | 
 | 	&ssc1_clk, | 
 | 	&tc0_clk, | 
 | 	&tc1_clk, | 
 | 	&tc2_clk, | 
 | 	&pwm_clk, | 
 | 	&tsc_clk, | 
 | 	&dma_clk, | 
 | 	&udphs_clk, | 
 | 	&lcdc_clk, | 
 | 	&ac97_clk, | 
 | 	// irq0 | 
 | }; | 
 |  | 
 | /* | 
 |  * The two programmable clocks. | 
 |  * You must configure pin multiplexing to bring these signals out. | 
 |  */ | 
 | static struct clk pck0 = { | 
 | 	.name		= "pck0", | 
 | 	.pmc_mask	= AT91_PMC_PCK0, | 
 | 	.type		= CLK_TYPE_PROGRAMMABLE, | 
 | 	.id		= 0, | 
 | }; | 
 | static struct clk pck1 = { | 
 | 	.name		= "pck1", | 
 | 	.pmc_mask	= AT91_PMC_PCK1, | 
 | 	.type		= CLK_TYPE_PROGRAMMABLE, | 
 | 	.id		= 1, | 
 | }; | 
 |  | 
 | static void __init at91sam9rl_register_clocks(void) | 
 | { | 
 | 	int i; | 
 |  | 
 | 	for (i = 0; i < ARRAY_SIZE(periph_clocks); i++) | 
 | 		clk_register(periph_clocks[i]); | 
 |  | 
 | 	clk_register(&pck0); | 
 | 	clk_register(&pck1); | 
 | } | 
 |  | 
 | /* -------------------------------------------------------------------- | 
 |  *  GPIO | 
 |  * -------------------------------------------------------------------- */ | 
 |  | 
 | static struct at91_gpio_bank at91sam9rl_gpio[] = { | 
 | 	{ | 
 | 		.id		= AT91SAM9RL_ID_PIOA, | 
 | 		.offset		= AT91_PIOA, | 
 | 		.clock		= &pioA_clk, | 
 | 	}, { | 
 | 		.id		= AT91SAM9RL_ID_PIOB, | 
 | 		.offset		= AT91_PIOB, | 
 | 		.clock		= &pioB_clk, | 
 | 	}, { | 
 | 		.id		= AT91SAM9RL_ID_PIOC, | 
 | 		.offset		= AT91_PIOC, | 
 | 		.clock		= &pioC_clk, | 
 | 	}, { | 
 | 		.id		= AT91SAM9RL_ID_PIOD, | 
 | 		.offset		= AT91_PIOD, | 
 | 		.clock		= &pioD_clk, | 
 | 	} | 
 | }; | 
 |  | 
 | static void at91sam9rl_poweroff(void) | 
 | { | 
 | 	at91_sys_write(AT91_SHDW_CR, AT91_SHDW_KEY | AT91_SHDW_SHDW); | 
 | } | 
 |  | 
 |  | 
 | /* -------------------------------------------------------------------- | 
 |  *  AT91SAM9RL processor initialization | 
 |  * -------------------------------------------------------------------- */ | 
 |  | 
 | void __init at91sam9rl_initialize(unsigned long main_clock) | 
 | { | 
 | 	unsigned long cidr, sram_size; | 
 |  | 
 | 	/* Map peripherals */ | 
 | 	iotable_init(at91sam9rl_io_desc, ARRAY_SIZE(at91sam9rl_io_desc)); | 
 |  | 
 | 	cidr = at91_sys_read(AT91_DBGU_CIDR); | 
 |  | 
 | 	switch (cidr & AT91_CIDR_SRAMSIZ) { | 
 | 		case AT91_CIDR_SRAMSIZ_32K: | 
 | 			sram_size = 2 * SZ_16K; | 
 | 			break; | 
 | 		case AT91_CIDR_SRAMSIZ_16K: | 
 | 		default: | 
 | 			sram_size = SZ_16K; | 
 | 	} | 
 |  | 
 | 	at91sam9rl_sram_desc->virtual = AT91_IO_VIRT_BASE - sram_size; | 
 | 	at91sam9rl_sram_desc->length = sram_size; | 
 |  | 
 | 	/* Map SRAM */ | 
 | 	iotable_init(at91sam9rl_sram_desc, ARRAY_SIZE(at91sam9rl_sram_desc)); | 
 |  | 
 | 	at91_arch_reset = at91sam9_alt_reset; | 
 | 	pm_power_off = at91sam9rl_poweroff; | 
 | 	at91_extern_irq = (1 << AT91SAM9RL_ID_IRQ0); | 
 |  | 
 | 	/* Init clock subsystem */ | 
 | 	at91_clock_init(main_clock); | 
 |  | 
 | 	/* Register the processor-specific clocks */ | 
 | 	at91sam9rl_register_clocks(); | 
 |  | 
 | 	/* Register GPIO subsystem */ | 
 | 	at91_gpio_init(at91sam9rl_gpio, 4); | 
 | } | 
 |  | 
 | /* -------------------------------------------------------------------- | 
 |  *  Interrupt initialization | 
 |  * -------------------------------------------------------------------- */ | 
 |  | 
 | /* | 
 |  * The default interrupt priority levels (0 = lowest, 7 = highest). | 
 |  */ | 
 | static unsigned int at91sam9rl_default_irq_priority[NR_AIC_IRQS] __initdata = { | 
 | 	7,	/* Advanced Interrupt Controller */ | 
 | 	7,	/* System Peripherals */ | 
 | 	1,	/* Parallel IO Controller A */ | 
 | 	1,	/* Parallel IO Controller B */ | 
 | 	1,	/* Parallel IO Controller C */ | 
 | 	1,	/* Parallel IO Controller D */ | 
 | 	5,	/* USART 0 */ | 
 | 	5,	/* USART 1 */ | 
 | 	5,	/* USART 2 */ | 
 | 	5,	/* USART 3 */ | 
 | 	0,	/* Multimedia Card Interface */ | 
 | 	6,	/* Two-Wire Interface 0 */ | 
 | 	6,	/* Two-Wire Interface 1 */ | 
 | 	5,	/* Serial Peripheral Interface */ | 
 | 	4,	/* Serial Synchronous Controller 0 */ | 
 | 	4,	/* Serial Synchronous Controller 1 */ | 
 | 	0,	/* Timer Counter 0 */ | 
 | 	0,	/* Timer Counter 1 */ | 
 | 	0,	/* Timer Counter 2 */ | 
 | 	0, | 
 | 	0,	/* Touch Screen Controller */ | 
 | 	0,	/* DMA Controller */ | 
 | 	2,	/* USB Device High speed port */ | 
 | 	2,	/* LCD Controller */ | 
 | 	6,	/* AC97 Controller */ | 
 | 	0, | 
 | 	0, | 
 | 	0, | 
 | 	0, | 
 | 	0, | 
 | 	0, | 
 | 	0,	/* Advanced Interrupt Controller */ | 
 | }; | 
 |  | 
 | void __init at91sam9rl_init_interrupts(unsigned int priority[NR_AIC_IRQS]) | 
 | { | 
 | 	if (!priority) | 
 | 		priority = at91sam9rl_default_irq_priority; | 
 |  | 
 | 	/* Initialize the AIC interrupt controller */ | 
 | 	at91_aic_init(priority); | 
 |  | 
 | 	/* Enable GPIO interrupts */ | 
 | 	at91_gpio_irq_setup(); | 
 | } |