diff --git a/include/linux/tipc.h b/include/linux/tipc.h
index 1faab77..4ecd004 100644
--- a/include/linux/tipc.h
+++ b/include/linux/tipc.h
@@ -1,5 +1,5 @@
 /*
- * include/linux/tipc.h: Include file for TIPC users
+ * include/linux/tipc.h: Include file for TIPC socket interface
  * 
  * Copyright (c) 2003-2005, Ericsson Research Canada
  * Copyright (c) 2005, Wind River Systems
@@ -35,8 +35,6 @@
 #define _LINUX_TIPC_H_
 
 #include <linux/types.h>
-#include <linux/string.h>
-#include <asm/byteorder.h>
 
 /*
  * TIPC addressing primitives
@@ -62,51 +60,51 @@
 			      unsigned int cluster,
 			      unsigned int node)
 {
-	return(zone << 24) | (cluster << 12) | node;
+	return (zone << 24) | (cluster << 12) | node;
 }
 
 static inline unsigned int tipc_zone(__u32 addr)
 {
-	return  addr >> 24;
+	return addr >> 24;
 }
 
 static inline unsigned int tipc_cluster(__u32 addr)
 {
-	return(addr >> 12) & 0xfff;
+	return (addr >> 12) & 0xfff;
 }
 
 static inline unsigned int tipc_node(__u32 addr)
 {
-	return  addr & 0xfff;
+	return addr & 0xfff;
 }
 
 /*
  * Application-accessible port name types
  */
 
-#define TIPC_NET_EVENTS		0	/* network event subscription name type */
-#define TIPC_TOP_SRV         	1  	/* topology service name type */
+#define TIPC_CFG_SRV		0	/* configuration service name type */
+#define TIPC_TOP_SRV		1	/* topology service name type */
 #define TIPC_RESERVED_TYPES	64	/* lowest user-publishable name type */
 
 /* 
  * Publication scopes when binding port names and port name sequences
  */
 
-#define TIPC_ZONE_SCOPE         1
-#define TIPC_CLUSTER_SCOPE      2     
-#define TIPC_NODE_SCOPE         3
+#define TIPC_ZONE_SCOPE		1
+#define TIPC_CLUSTER_SCOPE	2
+#define TIPC_NODE_SCOPE		3
 
 /*
  * Limiting values for messages
  */
 
-#define TIPC_MAX_USER_MSG_SIZE 66000
+#define TIPC_MAX_USER_MSG_SIZE	66000
 
-/* 
+/*
  * Message importance levels
  */
 
-#define TIPC_LOW_IMPORTANCE     	0  /* default */
+#define TIPC_LOW_IMPORTANCE		0  /* default */
 #define TIPC_MEDIUM_IMPORTANCE		1
 #define TIPC_HIGH_IMPORTANCE		2
 #define TIPC_CRITICAL_IMPORTANCE	3
@@ -135,7 +133,7 @@
 #define TIPC_SUB_SINGLE_EVT	0x10	/* expire after first event */
 #endif
 
-#define TIPC_WAIT_FOREVER   	~0	/* timeout for permanent subscription */
+#define TIPC_WAIT_FOREVER	~0	/* timeout for permanent subscription */
 
 struct tipc_subscr {
 	struct tipc_name_seq seq;	/* name sequence of interest */
@@ -144,16 +142,15 @@
 	char usr_handle[8];		/* available for subscriber use */
 };
 
-
-#define TIPC_PUBLISHED          1	/* publication event */
-#define TIPC_WITHDRAWN          2	/* withdraw event */
-#define TIPC_SUBSCR_TIMEOUT     3	/* subscription timeout event */
+#define TIPC_PUBLISHED		1	/* publication event */
+#define TIPC_WITHDRAWN		2	/* withdraw event */
+#define TIPC_SUBSCR_TIMEOUT	3	/* subscription timeout event */
 
 struct tipc_event {
 	__u32 event;			/* event type */
 	__u32 found_lower;		/* matching name seq instances */
 	__u32 found_upper;		/*    "      "    "     "      */
-        struct tipc_portid port;	/* associated port */
+	struct tipc_portid port;	/* associated port */
 	struct tipc_subscr s;		/* associated subscription */
 };
 
@@ -173,10 +170,10 @@
 #define SOL_TIPC	271
 #endif
 
-#define TIPC_ADDR_NAMESEQ   	1
-#define TIPC_ADDR_MCAST         1
-#define TIPC_ADDR_NAME      	2
-#define TIPC_ADDR_ID        	3
+#define TIPC_ADDR_NAMESEQ	1
+#define TIPC_ADDR_MCAST		1
+#define TIPC_ADDR_NAME		2
+#define TIPC_ADDR_ID		3
 
 struct sockaddr_tipc {
 	unsigned short family;
@@ -207,391 +204,6 @@
 #define TIPC_IMPORTANCE		127	/* Default: TIPC_LOW_IMPORTANCE */
 #define TIPC_SRC_DROPPABLE	128	/* Default: 0 (resend congested msg) */
 #define TIPC_DEST_DROPPABLE	129	/* Default: based on socket type */
-#define TIPC_CONN_TIMEOUT     	130	/* Default: 8000 (ms)  */
-
-/*
- * Bearer
- */
-
-/* Identifiers of supported TIPC media types */
-
-#define TIPC_MEDIA_TYPE_ETH	1
-
-/* Maximum sizes of TIPC bearer-related names (including terminating NUL) */ 
-
-#define TIPC_MAX_MEDIA_NAME	16	/* format = media */
-#define TIPC_MAX_IF_NAME	16	/* format = interface */
-#define TIPC_MAX_BEARER_NAME	32	/* format = media:interface */
-#define TIPC_MAX_LINK_NAME	60	/* format = Z.C.N:interface-Z.C.N:interface */
-
-struct tipc_media_addr {
-	__u32  type;
-	union {
-		__u8   eth_addr[6];	/* Ethernet bearer */ 
-#if 0
-		/* Prototypes for other possible bearer types */
-
-		struct {
-			__u16 sin_family;
-			__u16 sin_port;
-			struct {
-				__u32 s_addr;
-			} sin_addr;
-			char pad[4];
-		} addr_in;		/* IP-based bearer */
-		__u16  sock_descr;	/* generic socket bearer */
-#endif
-	} dev_addr;
-};
-
-
-/* Link priority limits (range from 0 to # priorities - 1) */
-
-#define TIPC_NUM_LINK_PRI 32
-
-/* Link tolerance limits (min, default, max), in ms */
-
-#define TIPC_MIN_LINK_TOL 50
-#define TIPC_DEF_LINK_TOL 1500
-#define TIPC_MAX_LINK_TOL 30000
-
-/* Link window limits (min, default, max), in packets */
-
-#define TIPC_MIN_LINK_WIN 16
-#define TIPC_DEF_LINK_WIN 50
-#define TIPC_MAX_LINK_WIN 150
-
-/*
- * Configuration
- *
- * All configuration management messaging involves sending a request message
- * to the TIPC configuration service on a node, which sends a reply message
- * back.  (In the future multi-message replies may be supported.)
- *
- * Both request and reply messages consist of a transport header and payload.
- * The transport header contains info about the desired operation;
- * the payload consists of zero or more type/length/value (TLV) items
- * which specify parameters or results for the operation.
- *
- * For many operations, the request and reply messages have a fixed number
- * of TLVs (usually zero or one); however, some reply messages may return 
- * a variable number of TLVs.  A failed request is denoted by the presence
- * of an "error string" TLV in the reply message instead of the TLV(s) the
- * reply should contain if the request succeeds.
- */
- 
-#define TIPC_CFG_SRV	0		/* configuration service name type */
-
-/* 
- * Public commands:
- * May be issued by any process.
- * Accepted by own node, or by remote node only if remote management enabled.                       
- */
- 
-#define  TIPC_CMD_NOOP   	    0x0000    /* tx none, rx none */
-#define  TIPC_CMD_GET_NODES         0x0001    /* tx net_addr, rx node_info(s) */
-#define  TIPC_CMD_GET_MEDIA_NAMES   0x0002    /* tx none, rx media_name(s) */
-#define  TIPC_CMD_GET_BEARER_NAMES  0x0003    /* tx none, rx bearer_name(s) */
-#define  TIPC_CMD_GET_LINKS         0x0004    /* tx net_addr, rx link_info(s) */
-#define  TIPC_CMD_SHOW_NAME_TABLE   0x0005    /* tx name_tbl_query, rx ultra_string */
-#define  TIPC_CMD_SHOW_PORTS        0x0006    /* tx none, rx ultra_string */
-#define  TIPC_CMD_SHOW_LINK_STATS   0x000B    /* tx link_name, rx ultra_string */
-
-#if 0
-#define  TIPC_CMD_SHOW_PORT_STATS   0x0008    /* tx port_ref, rx ultra_string */
-#define  TIPC_CMD_RESET_PORT_STATS  0x0009    /* tx port_ref, rx none */
-#define  TIPC_CMD_GET_ROUTES        0x000A    /* tx ?, rx ? */
-#define  TIPC_CMD_GET_LINK_PEER     0x000D    /* tx link_name, rx ? */
-#endif
-
-/* 
- * Protected commands:
- * May only be issued by "network administration capable" process.
- * Accepted by own node, or by remote node only if remote management enabled
- * and this node is zone manager.                       
- */
-
-#define  TIPC_CMD_GET_REMOTE_MNG    0x4003    /* tx none, rx unsigned */
-#define  TIPC_CMD_GET_MAX_PORTS     0x4004    /* tx none, rx unsigned */
-#define  TIPC_CMD_GET_MAX_PUBL      0x4005    /* tx none, rx unsigned */
-#define  TIPC_CMD_GET_MAX_SUBSCR    0x4006    /* tx none, rx unsigned */
-#define  TIPC_CMD_GET_MAX_ZONES     0x4007    /* tx none, rx unsigned */
-#define  TIPC_CMD_GET_MAX_CLUSTERS  0x4008    /* tx none, rx unsigned */
-#define  TIPC_CMD_GET_MAX_NODES     0x4009    /* tx none, rx unsigned */
-#define  TIPC_CMD_GET_MAX_SLAVES    0x400A    /* tx none, rx unsigned */
-#define  TIPC_CMD_GET_NETID         0x400B    /* tx none, rx unsigned */
-
-#define  TIPC_CMD_ENABLE_BEARER     0x4101    /* tx bearer_config, rx none */
-#define  TIPC_CMD_DISABLE_BEARER    0x4102    /* tx bearer_name, rx none */
-#define  TIPC_CMD_SET_LINK_TOL      0x4107    /* tx link_config, rx none */
-#define  TIPC_CMD_SET_LINK_PRI      0x4108    /* tx link_config, rx none */
-#define  TIPC_CMD_SET_LINK_WINDOW   0x4109    /* tx link_config, rx none */
-#define  TIPC_CMD_SET_LOG_SIZE      0x410A    /* tx unsigned, rx none */
-#define  TIPC_CMD_DUMP_LOG          0x410B    /* tx none, rx ultra_string */
-#define  TIPC_CMD_RESET_LINK_STATS  0x410C    /* tx link_name, rx none */
-
-#if 0
-#define  TIPC_CMD_CREATE_LINK       0x4103    /* tx link_create, rx none */
-#define  TIPC_CMD_REMOVE_LINK       0x4104    /* tx link_name, rx none */
-#define  TIPC_CMD_BLOCK_LINK        0x4105    /* tx link_name, rx none */
-#define  TIPC_CMD_UNBLOCK_LINK      0x4106    /* tx link_name, rx none */
-#endif
-
-/* 
- * Private commands:
- * May only be issued by "network administration capable" process.
- * Accepted by own node only; cannot be used on a remote node.                       
- */
-
-#define  TIPC_CMD_SET_NODE_ADDR     0x8001    /* tx net_addr, rx none */
-#if 0
-#define  TIPC_CMD_SET_ZONE_MASTER   0x8002    /* tx none, rx none */
-#endif
-#define  TIPC_CMD_SET_REMOTE_MNG    0x8003    /* tx unsigned, rx none */
-#define  TIPC_CMD_SET_MAX_PORTS     0x8004    /* tx unsigned, rx none */
-#define  TIPC_CMD_SET_MAX_PUBL      0x8005    /* tx unsigned, rx none */
-#define  TIPC_CMD_SET_MAX_SUBSCR    0x8006    /* tx unsigned, rx none */
-#define  TIPC_CMD_SET_MAX_ZONES     0x8007    /* tx unsigned, rx none */
-#define  TIPC_CMD_SET_MAX_CLUSTERS  0x8008    /* tx unsigned, rx none */
-#define  TIPC_CMD_SET_MAX_NODES     0x8009    /* tx unsigned, rx none */
-#define  TIPC_CMD_SET_MAX_SLAVES    0x800A    /* tx unsigned, rx none */
-#define  TIPC_CMD_SET_NETID         0x800B    /* tx unsigned, rx none */
-
-/*
- * TLV types defined for TIPC
- */
-
-#define TIPC_TLV_NONE		0	/* no TLV present */
-#define TIPC_TLV_VOID		1	/* empty TLV (0 data bytes)*/
-#define TIPC_TLV_UNSIGNED	2	/* 32-bit integer */
-#define TIPC_TLV_STRING		3	/* char[128] (max) */
-#define TIPC_TLV_LARGE_STRING	4	/* char[2048] (max) */
-#define TIPC_TLV_ULTRA_STRING	5	/* char[32768] (max) */
-
-#define TIPC_TLV_ERROR_STRING	16	/* char[128] containing "error code" */
-#define TIPC_TLV_NET_ADDR   	17	/* 32-bit integer denoting <Z.C.N> */
-#define TIPC_TLV_MEDIA_NAME	18	/* char[MAX_MEDIA_NAME] */
-#define TIPC_TLV_BEARER_NAME	19	/* char[MAX_BEARER_NAME] */
-#define TIPC_TLV_LINK_NAME	20	/* char[MAX_LINK_NAME] */
-#define TIPC_TLV_NODE_INFO	21	/* struct tipc_node_info */
-#define TIPC_TLV_LINK_INFO	22	/* struct tipc_link_info */
-#define TIPC_TLV_BEARER_CONFIG  23	/* struct tipc_bearer_config */
-#define TIPC_TLV_LINK_CONFIG    24	/* struct tipc_link_config */
-#define TIPC_TLV_NAME_TBL_QUERY	25	/* struct tipc_name_table_query */
-#define TIPC_TLV_PORT_REF   	26	/* 32-bit port reference */
-
-struct tipc_node_info {
-	__u32 addr;			/* network address of node */
-	__u32 up;			/* 0=down, 1= up */
-};
-
-struct tipc_link_info {
-	__u32 dest;			/* network address of peer node */
-	__u32 up;			/* 0=down, 1=up */
-	char str[TIPC_MAX_LINK_NAME];	/* link name */
-};
-
-struct tipc_bearer_config {
-	__u32 priority;			/* Range [1,31]. Override per link  */
-	__u32 detect_scope;     
-	char name[TIPC_MAX_BEARER_NAME];
-};
-
-struct tipc_link_config {
-	__u32 value;
-	char name[TIPC_MAX_LINK_NAME];
-};
-
-#define TIPC_NTQ_ALLTYPES 0x80000000
-
-struct tipc_name_table_query {
-	__u32 depth;	/* 1:type, 2:+name info, 3:+port info, 4+:+debug info */
-	__u32 type;	/* {t,l,u} info ignored if high bit of "depth" is set */
-	__u32 lowbound; /* (i.e. displays all entries of name table) */
-	__u32 upbound;
-};
-
-/*
- * The error string TLV is a null-terminated string describing the cause 
- * of the request failure.  To simplify error processing (and to save space)
- * the first character of the string can be a special error code character
- * (lying by the range 0x80 to 0xFF) which represents a pre-defined reason.
- */
-
-#define TIPC_CFG_TLV_ERROR      "\x80"  /* request contains incorrect TLV(s) */
-#define TIPC_CFG_NOT_NET_ADMIN  "\x81"	/* must be network administrator */
-#define TIPC_CFG_NOT_ZONE_MSTR	"\x82"	/* must be zone master */
-#define TIPC_CFG_NO_REMOTE	"\x83"	/* remote management not enabled */
-#define TIPC_CFG_NOT_SUPPORTED  "\x84"	/* request is not supported by TIPC */
-#define TIPC_CFG_INVALID_VALUE  "\x85"  /* request has invalid argument value */
-
-#if 0
-/* prototypes TLV structures for proposed commands */
-struct tipc_link_create {
-	__u32   domain;
-	struct tipc_media_addr peer_addr;
-	char bearer_name[MAX_BEARER_NAME];
-};
-
-struct tipc_route_info {
-	__u32 dest;
-	__u32 router;
-};
-#endif
-
-/*
- * A TLV consists of a descriptor, followed by the TLV value.
- * TLV descriptor fields are stored in network byte order; 
- * TLV values must also be stored in network byte order (where applicable).
- * TLV descriptors must be aligned to addresses which are multiple of 4,
- * so up to 3 bytes of padding may exist at the end of the TLV value area.
- * There must not be any padding between the TLV descriptor and its value.
- */
-
-struct tlv_desc {
-	__u16 tlv_len;		/* TLV length (descriptor + value) */
-	__u16 tlv_type;		/* TLV identifier */
-};
-
-#define TLV_ALIGNTO 4
-
-#define TLV_ALIGN(datalen) (((datalen)+(TLV_ALIGNTO-1)) & ~(TLV_ALIGNTO-1))
-#define TLV_LENGTH(datalen) (sizeof(struct tlv_desc) + (datalen))
-#define TLV_SPACE(datalen) (TLV_ALIGN(TLV_LENGTH(datalen)))
-#define TLV_DATA(tlv) ((void *)((char *)(tlv) + TLV_LENGTH(0)))
-
-static inline int TLV_OK(const void *tlv, __u16 space)
-{
-	/*
-	 * Would also like to check that "tlv" is a multiple of 4,
-	 * but don't know how to do this in a portable way.
-	 * - Tried doing (!(tlv & (TLV_ALIGNTO-1))), but GCC compiler
-	 *   won't allow binary "&" with a pointer.
-	 * - Tried casting "tlv" to integer type, but causes warning about size
-	 *   mismatch when pointer is bigger than chosen type (int, long, ...).
-	 */
-
-	return (space >= TLV_SPACE(0)) &&
-		(ntohs(((struct tlv_desc *)tlv)->tlv_len) <= space);
-}
-
-static inline int TLV_CHECK(const void *tlv, __u16 space, __u16 exp_type)
-{
-	return TLV_OK(tlv, space) && 
-		(ntohs(((struct tlv_desc *)tlv)->tlv_type) == exp_type);
-}
-
-static inline int TLV_SET(void *tlv, __u16 type, void *data, __u16 len)
-{
-	struct tlv_desc *tlv_ptr;
-	int tlv_len;
-
-	tlv_len = TLV_LENGTH(len);
-	tlv_ptr = (struct tlv_desc *)tlv;
-	tlv_ptr->tlv_type = htons(type);
-	tlv_ptr->tlv_len  = htons(tlv_len);
-	if (len && data)
-		memcpy(TLV_DATA(tlv_ptr), data, tlv_len);
-	return TLV_SPACE(len);
-}
-
-/*
- * A TLV list descriptor simplifies processing of messages 
- * containing multiple TLVs.
- */
-
-struct tlv_list_desc {
-	struct tlv_desc *tlv_ptr;	/* ptr to current TLV */
-	__u32 tlv_space;		/* # bytes from curr TLV to list end */
-};
-
-static inline void TLV_LIST_INIT(struct tlv_list_desc *list, 
-				 void *data, __u32 space)
-{
-	list->tlv_ptr = (struct tlv_desc *)data;
-	list->tlv_space = space;
-}
-	     
-static inline int TLV_LIST_EMPTY(struct tlv_list_desc *list)
-{ 
-	return (list->tlv_space == 0);
-}
-
-static inline int TLV_LIST_CHECK(struct tlv_list_desc *list, __u16 exp_type)
-{
-	return TLV_CHECK(list->tlv_ptr, list->tlv_space, exp_type);
-}
-
-static inline void *TLV_LIST_DATA(struct tlv_list_desc *list)
-{
-	return TLV_DATA(list->tlv_ptr);
-}
-
-static inline void TLV_LIST_STEP(struct tlv_list_desc *list)
-{
-	__u16 tlv_space = TLV_ALIGN(ntohs(list->tlv_ptr->tlv_len));
-
-        list->tlv_ptr = (struct tlv_desc *)((char *)list->tlv_ptr + tlv_space);
-	list->tlv_space -= tlv_space;
-}
-
-/*
- * Configuration messages exchanged via NETLINK_GENERIC use the following
- * family id, name, version and command.
- */
-#define TIPC_GENL_NAME		"TIPC"
-#define TIPC_GENL_VERSION	0x1
-#define TIPC_GENL_CMD		0x1
-
-/*
- * TIPC specific header used in NETLINK_GENERIC requests.
- */
-struct tipc_genlmsghdr {
-	__u32 dest;		/* Destination address */
-	__u16 cmd;		/* Command */
-	__u16 reserved;		/* Unused */
-};
-
-#define TIPC_GENL_HDRLEN	NLMSG_ALIGN(sizeof(struct tipc_genlmsghdr))
-
-/*
- * Configuration messages exchanged via TIPC sockets use the TIPC configuration 
- * message header, which is defined below.  This structure is analogous 
- * to the Netlink message header, but fields are stored in network byte order 
- * and no padding is permitted between the header and the message data 
- * that follows.
- */
-
-struct tipc_cfg_msg_hdr
-{
-	__u32 tcm_len;		/* Message length (including header) */
-	__u16 tcm_type;		/* Command type */
-	__u16 tcm_flags;	/* Additional flags */
-	char  tcm_reserved[8];	/* Unused */
-};
-
-#define TCM_F_REQUEST	0x1	/* Flag: Request message */
-#define TCM_F_MORE	0x2	/* Flag: Message to be continued */
-
-#define TCM_ALIGN(datalen)  (((datalen)+3) & ~3)
-#define TCM_LENGTH(datalen) (sizeof(struct tipc_cfg_msg_hdr) + datalen)
-#define TCM_SPACE(datalen)  (TCM_ALIGN(TCM_LENGTH(datalen)))
-#define TCM_DATA(tcm_hdr)   ((void *)((char *)(tcm_hdr) + TCM_LENGTH(0)))
-
-static inline int TCM_SET(void *msg, __u16 cmd, __u16 flags,
-			  void *data, __u16 data_len)
-{
-	struct tipc_cfg_msg_hdr *tcm_hdr;
-	int msg_len;
-
-	msg_len = TCM_LENGTH(data_len);
-	tcm_hdr = (struct tipc_cfg_msg_hdr *)msg;
-	tcm_hdr->tcm_len   = htonl(msg_len);
-	tcm_hdr->tcm_type  = htons(cmd);
-	tcm_hdr->tcm_flags = htons(flags);
-	if (data_len && data)
-		memcpy(TCM_DATA(msg), data, data_len);
-	return TCM_SPACE(data_len);
-}
+#define TIPC_CONN_TIMEOUT	130	/* Default: 8000 (ms)  */
 
 #endif