|  | /* | 
|  | * SCSI low-level driver for the 53c94 SCSI bus adaptor found | 
|  | * on Power Macintosh computers, controlling the external SCSI chain. | 
|  | * We assume the 53c94 is connected to a DBDMA (descriptor-based DMA) | 
|  | * controller. | 
|  | * | 
|  | * Paul Mackerras, August 1996. | 
|  | * Copyright (C) 1996 Paul Mackerras. | 
|  | */ | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/types.h> | 
|  | #include <linux/string.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/blkdev.h> | 
|  | #include <linux/proc_fs.h> | 
|  | #include <linux/stat.h> | 
|  | #include <linux/spinlock.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <asm/dbdma.h> | 
|  | #include <asm/io.h> | 
|  | #include <asm/pgtable.h> | 
|  | #include <asm/prom.h> | 
|  | #include <asm/system.h> | 
|  | #include <asm/pci-bridge.h> | 
|  | #include <asm/macio.h> | 
|  |  | 
|  | #include <scsi/scsi.h> | 
|  | #include <scsi/scsi_cmnd.h> | 
|  | #include <scsi/scsi_device.h> | 
|  | #include <scsi/scsi_host.h> | 
|  |  | 
|  | #include "mac53c94.h" | 
|  |  | 
|  | enum fsc_phase { | 
|  | idle, | 
|  | selecting, | 
|  | dataing, | 
|  | completing, | 
|  | busfreeing, | 
|  | }; | 
|  |  | 
|  | struct fsc_state { | 
|  | struct	mac53c94_regs __iomem *regs; | 
|  | int	intr; | 
|  | struct	dbdma_regs __iomem *dma; | 
|  | int	dmaintr; | 
|  | int	clk_freq; | 
|  | struct	Scsi_Host *host; | 
|  | struct scsi_cmnd *request_q; | 
|  | struct scsi_cmnd *request_qtail; | 
|  | struct scsi_cmnd *current_req;		/* req we're currently working on */ | 
|  | enum fsc_phase phase;		/* what we're currently trying to do */ | 
|  | struct dbdma_cmd *dma_cmds;	/* space for dbdma commands, aligned */ | 
|  | void	*dma_cmd_space; | 
|  | struct	pci_dev *pdev; | 
|  | dma_addr_t dma_addr; | 
|  | struct macio_dev *mdev; | 
|  | }; | 
|  |  | 
|  | static void mac53c94_init(struct fsc_state *); | 
|  | static void mac53c94_start(struct fsc_state *); | 
|  | static void mac53c94_interrupt(int, void *); | 
|  | static irqreturn_t do_mac53c94_interrupt(int, void *); | 
|  | static void cmd_done(struct fsc_state *, int result); | 
|  | static void set_dma_cmds(struct fsc_state *, struct scsi_cmnd *); | 
|  |  | 
|  |  | 
|  | static int mac53c94_queue(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *)) | 
|  | { | 
|  | struct fsc_state *state; | 
|  |  | 
|  | #if 0 | 
|  | if (cmd->sc_data_direction == DMA_TO_DEVICE) { | 
|  | int i; | 
|  | printk(KERN_DEBUG "mac53c94_queue %p: command is", cmd); | 
|  | for (i = 0; i < cmd->cmd_len; ++i) | 
|  | printk(KERN_CONT " %.2x", cmd->cmnd[i]); | 
|  | printk(KERN_CONT "\n"); | 
|  | printk(KERN_DEBUG "use_sg=%d request_bufflen=%d request_buffer=%p\n", | 
|  | scsi_sg_count(cmd), scsi_bufflen(cmd), scsi_sglist(cmd)); | 
|  | } | 
|  | #endif | 
|  |  | 
|  | cmd->scsi_done = done; | 
|  | cmd->host_scribble = NULL; | 
|  |  | 
|  | state = (struct fsc_state *) cmd->device->host->hostdata; | 
|  |  | 
|  | if (state->request_q == NULL) | 
|  | state->request_q = cmd; | 
|  | else | 
|  | state->request_qtail->host_scribble = (void *) cmd; | 
|  | state->request_qtail = cmd; | 
|  |  | 
|  | if (state->phase == idle) | 
|  | mac53c94_start(state); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int mac53c94_host_reset(struct scsi_cmnd *cmd) | 
|  | { | 
|  | struct fsc_state *state = (struct fsc_state *) cmd->device->host->hostdata; | 
|  | struct mac53c94_regs __iomem *regs = state->regs; | 
|  | struct dbdma_regs __iomem *dma = state->dma; | 
|  | unsigned long flags; | 
|  |  | 
|  | spin_lock_irqsave(cmd->device->host->host_lock, flags); | 
|  |  | 
|  | writel((RUN|PAUSE|FLUSH|WAKE) << 16, &dma->control); | 
|  | writeb(CMD_SCSI_RESET, ®s->command);	/* assert RST */ | 
|  | udelay(100);			/* leave it on for a while (>= 25us) */ | 
|  | writeb(CMD_RESET, ®s->command); | 
|  | udelay(20); | 
|  | mac53c94_init(state); | 
|  | writeb(CMD_NOP, ®s->command); | 
|  |  | 
|  | spin_unlock_irqrestore(cmd->device->host->host_lock, flags); | 
|  | return SUCCESS; | 
|  | } | 
|  |  | 
|  | static void mac53c94_init(struct fsc_state *state) | 
|  | { | 
|  | struct mac53c94_regs __iomem *regs = state->regs; | 
|  | struct dbdma_regs __iomem *dma = state->dma; | 
|  | int x; | 
|  |  | 
|  | writeb(state->host->this_id | CF1_PAR_ENABLE, ®s->config1); | 
|  | writeb(TIMO_VAL(250), ®s->sel_timeout);	/* 250ms */ | 
|  | writeb(CLKF_VAL(state->clk_freq), ®s->clk_factor); | 
|  | writeb(CF2_FEATURE_EN, ®s->config2); | 
|  | writeb(0, ®s->config3); | 
|  | writeb(0, ®s->sync_period); | 
|  | writeb(0, ®s->sync_offset); | 
|  | x = readb(®s->interrupt); | 
|  | writel((RUN|PAUSE|FLUSH|WAKE) << 16, &dma->control); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Start the next command for a 53C94. | 
|  | * Should be called with interrupts disabled. | 
|  | */ | 
|  | static void mac53c94_start(struct fsc_state *state) | 
|  | { | 
|  | struct scsi_cmnd *cmd; | 
|  | struct mac53c94_regs __iomem *regs = state->regs; | 
|  | int i; | 
|  |  | 
|  | if (state->phase != idle || state->current_req != NULL) | 
|  | panic("inappropriate mac53c94_start (state=%p)", state); | 
|  | if (state->request_q == NULL) | 
|  | return; | 
|  | state->current_req = cmd = state->request_q; | 
|  | state->request_q = (struct scsi_cmnd *) cmd->host_scribble; | 
|  |  | 
|  | /* Off we go */ | 
|  | writeb(0, ®s->count_lo); | 
|  | writeb(0, ®s->count_mid); | 
|  | writeb(0, ®s->count_hi); | 
|  | writeb(CMD_NOP + CMD_DMA_MODE, ®s->command); | 
|  | udelay(1); | 
|  | writeb(CMD_FLUSH, ®s->command); | 
|  | udelay(1); | 
|  | writeb(cmd->device->id, ®s->dest_id); | 
|  | writeb(0, ®s->sync_period); | 
|  | writeb(0, ®s->sync_offset); | 
|  |  | 
|  | /* load the command into the FIFO */ | 
|  | for (i = 0; i < cmd->cmd_len; ++i) | 
|  | writeb(cmd->cmnd[i], ®s->fifo); | 
|  |  | 
|  | /* do select without ATN XXX */ | 
|  | writeb(CMD_SELECT, ®s->command); | 
|  | state->phase = selecting; | 
|  |  | 
|  | set_dma_cmds(state, cmd); | 
|  | } | 
|  |  | 
|  | static irqreturn_t do_mac53c94_interrupt(int irq, void *dev_id) | 
|  | { | 
|  | unsigned long flags; | 
|  | struct Scsi_Host *dev = ((struct fsc_state *) dev_id)->current_req->device->host; | 
|  |  | 
|  | spin_lock_irqsave(dev->host_lock, flags); | 
|  | mac53c94_interrupt(irq, dev_id); | 
|  | spin_unlock_irqrestore(dev->host_lock, flags); | 
|  | return IRQ_HANDLED; | 
|  | } | 
|  |  | 
|  | static void mac53c94_interrupt(int irq, void *dev_id) | 
|  | { | 
|  | struct fsc_state *state = (struct fsc_state *) dev_id; | 
|  | struct mac53c94_regs __iomem *regs = state->regs; | 
|  | struct dbdma_regs __iomem *dma = state->dma; | 
|  | struct scsi_cmnd *cmd = state->current_req; | 
|  | int nb, stat, seq, intr; | 
|  | static int mac53c94_errors; | 
|  |  | 
|  | /* | 
|  | * Apparently, reading the interrupt register unlatches | 
|  | * the status and sequence step registers. | 
|  | */ | 
|  | seq = readb(®s->seqstep); | 
|  | stat = readb(®s->status); | 
|  | intr = readb(®s->interrupt); | 
|  |  | 
|  | #if 0 | 
|  | printk(KERN_DEBUG "mac53c94_intr, intr=%x stat=%x seq=%x phase=%d\n", | 
|  | intr, stat, seq, state->phase); | 
|  | #endif | 
|  |  | 
|  | if (intr & INTR_RESET) { | 
|  | /* SCSI bus was reset */ | 
|  | printk(KERN_INFO "external SCSI bus reset detected\n"); | 
|  | writeb(CMD_NOP, ®s->command); | 
|  | writel(RUN << 16, &dma->control);	/* stop dma */ | 
|  | cmd_done(state, DID_RESET << 16); | 
|  | return; | 
|  | } | 
|  | if (intr & INTR_ILL_CMD) { | 
|  | printk(KERN_ERR "53c94: invalid cmd, intr=%x stat=%x seq=%x phase=%d\n", | 
|  | intr, stat, seq, state->phase); | 
|  | cmd_done(state, DID_ERROR << 16); | 
|  | return; | 
|  | } | 
|  | if (stat & STAT_ERROR) { | 
|  | #if 0 | 
|  | /* XXX these seem to be harmless? */ | 
|  | printk("53c94: bad error, intr=%x stat=%x seq=%x phase=%d\n", | 
|  | intr, stat, seq, state->phase); | 
|  | #endif | 
|  | ++mac53c94_errors; | 
|  | writeb(CMD_NOP + CMD_DMA_MODE, ®s->command); | 
|  | } | 
|  | if (cmd == 0) { | 
|  | printk(KERN_DEBUG "53c94: interrupt with no command active?\n"); | 
|  | return; | 
|  | } | 
|  | if (stat & STAT_PARITY) { | 
|  | printk(KERN_ERR "mac53c94: parity error\n"); | 
|  | cmd_done(state, DID_PARITY << 16); | 
|  | return; | 
|  | } | 
|  | switch (state->phase) { | 
|  | case selecting: | 
|  | if (intr & INTR_DISCONNECT) { | 
|  | /* selection timed out */ | 
|  | cmd_done(state, DID_BAD_TARGET << 16); | 
|  | return; | 
|  | } | 
|  | if (intr != INTR_BUS_SERV + INTR_DONE) { | 
|  | printk(KERN_DEBUG "got intr %x during selection\n", intr); | 
|  | cmd_done(state, DID_ERROR << 16); | 
|  | return; | 
|  | } | 
|  | if ((seq & SS_MASK) != SS_DONE) { | 
|  | printk(KERN_DEBUG "seq step %x after command\n", seq); | 
|  | cmd_done(state, DID_ERROR << 16); | 
|  | return; | 
|  | } | 
|  | writeb(CMD_NOP, ®s->command); | 
|  | /* set DMA controller going if any data to transfer */ | 
|  | if ((stat & (STAT_MSG|STAT_CD)) == 0 | 
|  | && (scsi_sg_count(cmd) > 0 || scsi_bufflen(cmd))) { | 
|  | nb = cmd->SCp.this_residual; | 
|  | if (nb > 0xfff0) | 
|  | nb = 0xfff0; | 
|  | cmd->SCp.this_residual -= nb; | 
|  | writeb(nb, ®s->count_lo); | 
|  | writeb(nb >> 8, ®s->count_mid); | 
|  | writeb(CMD_DMA_MODE + CMD_NOP, ®s->command); | 
|  | writel(virt_to_phys(state->dma_cmds), &dma->cmdptr); | 
|  | writel((RUN << 16) | RUN, &dma->control); | 
|  | writeb(CMD_DMA_MODE + CMD_XFER_DATA, ®s->command); | 
|  | state->phase = dataing; | 
|  | break; | 
|  | } else if ((stat & STAT_PHASE) == STAT_CD + STAT_IO) { | 
|  | /* up to status phase already */ | 
|  | writeb(CMD_I_COMPLETE, ®s->command); | 
|  | state->phase = completing; | 
|  | } else { | 
|  | printk(KERN_DEBUG "in unexpected phase %x after cmd\n", | 
|  | stat & STAT_PHASE); | 
|  | cmd_done(state, DID_ERROR << 16); | 
|  | return; | 
|  | } | 
|  | break; | 
|  |  | 
|  | case dataing: | 
|  | if (intr != INTR_BUS_SERV) { | 
|  | printk(KERN_DEBUG "got intr %x before status\n", intr); | 
|  | cmd_done(state, DID_ERROR << 16); | 
|  | return; | 
|  | } | 
|  | if (cmd->SCp.this_residual != 0 | 
|  | && (stat & (STAT_MSG|STAT_CD)) == 0) { | 
|  | /* Set up the count regs to transfer more */ | 
|  | nb = cmd->SCp.this_residual; | 
|  | if (nb > 0xfff0) | 
|  | nb = 0xfff0; | 
|  | cmd->SCp.this_residual -= nb; | 
|  | writeb(nb, ®s->count_lo); | 
|  | writeb(nb >> 8, ®s->count_mid); | 
|  | writeb(CMD_DMA_MODE + CMD_NOP, ®s->command); | 
|  | writeb(CMD_DMA_MODE + CMD_XFER_DATA, ®s->command); | 
|  | break; | 
|  | } | 
|  | if ((stat & STAT_PHASE) != STAT_CD + STAT_IO) { | 
|  | printk(KERN_DEBUG "intr %x before data xfer complete\n", intr); | 
|  | } | 
|  | writel(RUN << 16, &dma->control);	/* stop dma */ | 
|  | scsi_dma_unmap(cmd); | 
|  | /* should check dma status */ | 
|  | writeb(CMD_I_COMPLETE, ®s->command); | 
|  | state->phase = completing; | 
|  | break; | 
|  | case completing: | 
|  | if (intr != INTR_DONE) { | 
|  | printk(KERN_DEBUG "got intr %x on completion\n", intr); | 
|  | cmd_done(state, DID_ERROR << 16); | 
|  | return; | 
|  | } | 
|  | cmd->SCp.Status = readb(®s->fifo); | 
|  | cmd->SCp.Message = readb(®s->fifo); | 
|  | cmd->result = CMD_ACCEPT_MSG; | 
|  | writeb(CMD_ACCEPT_MSG, ®s->command); | 
|  | state->phase = busfreeing; | 
|  | break; | 
|  | case busfreeing: | 
|  | if (intr != INTR_DISCONNECT) { | 
|  | printk(KERN_DEBUG "got intr %x when expected disconnect\n", intr); | 
|  | } | 
|  | cmd_done(state, (DID_OK << 16) + (cmd->SCp.Message << 8) | 
|  | + cmd->SCp.Status); | 
|  | break; | 
|  | default: | 
|  | printk(KERN_DEBUG "don't know about phase %d\n", state->phase); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void cmd_done(struct fsc_state *state, int result) | 
|  | { | 
|  | struct scsi_cmnd *cmd; | 
|  |  | 
|  | cmd = state->current_req; | 
|  | if (cmd != 0) { | 
|  | cmd->result = result; | 
|  | (*cmd->scsi_done)(cmd); | 
|  | state->current_req = NULL; | 
|  | } | 
|  | state->phase = idle; | 
|  | mac53c94_start(state); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Set up DMA commands for transferring data. | 
|  | */ | 
|  | static void set_dma_cmds(struct fsc_state *state, struct scsi_cmnd *cmd) | 
|  | { | 
|  | int i, dma_cmd, total, nseg; | 
|  | struct scatterlist *scl; | 
|  | struct dbdma_cmd *dcmds; | 
|  | dma_addr_t dma_addr; | 
|  | u32 dma_len; | 
|  |  | 
|  | nseg = scsi_dma_map(cmd); | 
|  | BUG_ON(nseg < 0); | 
|  | if (!nseg) | 
|  | return; | 
|  |  | 
|  | dma_cmd = cmd->sc_data_direction == DMA_TO_DEVICE ? | 
|  | OUTPUT_MORE : INPUT_MORE; | 
|  | dcmds = state->dma_cmds; | 
|  | total = 0; | 
|  |  | 
|  | scsi_for_each_sg(cmd, scl, nseg, i) { | 
|  | dma_addr = sg_dma_address(scl); | 
|  | dma_len = sg_dma_len(scl); | 
|  | if (dma_len > 0xffff) | 
|  | panic("mac53c94: scatterlist element >= 64k"); | 
|  | total += dma_len; | 
|  | st_le16(&dcmds->req_count, dma_len); | 
|  | st_le16(&dcmds->command, dma_cmd); | 
|  | st_le32(&dcmds->phy_addr, dma_addr); | 
|  | dcmds->xfer_status = 0; | 
|  | ++dcmds; | 
|  | } | 
|  |  | 
|  | dma_cmd += OUTPUT_LAST - OUTPUT_MORE; | 
|  | st_le16(&dcmds[-1].command, dma_cmd); | 
|  | st_le16(&dcmds->command, DBDMA_STOP); | 
|  | cmd->SCp.this_residual = total; | 
|  | } | 
|  |  | 
|  | static struct scsi_host_template mac53c94_template = { | 
|  | .proc_name	= "53c94", | 
|  | .name		= "53C94", | 
|  | .queuecommand	= mac53c94_queue, | 
|  | .eh_host_reset_handler = mac53c94_host_reset, | 
|  | .can_queue	= 1, | 
|  | .this_id	= 7, | 
|  | .sg_tablesize	= SG_ALL, | 
|  | .cmd_per_lun	= 1, | 
|  | .use_clustering	= DISABLE_CLUSTERING, | 
|  | }; | 
|  |  | 
|  | static int mac53c94_probe(struct macio_dev *mdev, const struct of_device_id *match) | 
|  | { | 
|  | struct device_node *node = macio_get_of_node(mdev); | 
|  | struct pci_dev *pdev = macio_get_pci_dev(mdev); | 
|  | struct fsc_state *state; | 
|  | struct Scsi_Host *host; | 
|  | void *dma_cmd_space; | 
|  | const unsigned char *clkprop; | 
|  | int proplen, rc = -ENODEV; | 
|  |  | 
|  | if (macio_resource_count(mdev) != 2 || macio_irq_count(mdev) != 2) { | 
|  | printk(KERN_ERR "mac53c94: expected 2 addrs and intrs" | 
|  | " (got %d/%d)\n", | 
|  | macio_resource_count(mdev), macio_irq_count(mdev)); | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | if (macio_request_resources(mdev, "mac53c94") != 0) { | 
|  | printk(KERN_ERR "mac53c94: unable to request memory resources"); | 
|  | return -EBUSY; | 
|  | } | 
|  |  | 
|  | host = scsi_host_alloc(&mac53c94_template, sizeof(struct fsc_state)); | 
|  | if (host == NULL) { | 
|  | printk(KERN_ERR "mac53c94: couldn't register host"); | 
|  | rc = -ENOMEM; | 
|  | goto out_release; | 
|  | } | 
|  |  | 
|  | state = (struct fsc_state *) host->hostdata; | 
|  | macio_set_drvdata(mdev, state); | 
|  | state->host = host; | 
|  | state->pdev = pdev; | 
|  | state->mdev = mdev; | 
|  |  | 
|  | state->regs = (struct mac53c94_regs __iomem *) | 
|  | ioremap(macio_resource_start(mdev, 0), 0x1000); | 
|  | state->intr = macio_irq(mdev, 0); | 
|  | state->dma = (struct dbdma_regs __iomem *) | 
|  | ioremap(macio_resource_start(mdev, 1), 0x1000); | 
|  | state->dmaintr = macio_irq(mdev, 1); | 
|  | if (state->regs == NULL || state->dma == NULL) { | 
|  | printk(KERN_ERR "mac53c94: ioremap failed for %s\n", | 
|  | node->full_name); | 
|  | goto out_free; | 
|  | } | 
|  |  | 
|  | clkprop = of_get_property(node, "clock-frequency", &proplen); | 
|  | if (clkprop == NULL || proplen != sizeof(int)) { | 
|  | printk(KERN_ERR "%s: can't get clock frequency, " | 
|  | "assuming 25MHz\n", node->full_name); | 
|  | state->clk_freq = 25000000; | 
|  | } else | 
|  | state->clk_freq = *(int *)clkprop; | 
|  |  | 
|  | /* Space for dma command list: +1 for stop command, | 
|  | * +1 to allow for aligning. | 
|  | * XXX FIXME: Use DMA consistent routines | 
|  | */ | 
|  | dma_cmd_space = kmalloc((host->sg_tablesize + 2) * | 
|  | sizeof(struct dbdma_cmd), GFP_KERNEL); | 
|  | if (dma_cmd_space == 0) { | 
|  | printk(KERN_ERR "mac53c94: couldn't allocate dma " | 
|  | "command space for %s\n", node->full_name); | 
|  | rc = -ENOMEM; | 
|  | goto out_free; | 
|  | } | 
|  | state->dma_cmds = (struct dbdma_cmd *)DBDMA_ALIGN(dma_cmd_space); | 
|  | memset(state->dma_cmds, 0, (host->sg_tablesize + 1) | 
|  | * sizeof(struct dbdma_cmd)); | 
|  | state->dma_cmd_space = dma_cmd_space; | 
|  |  | 
|  | mac53c94_init(state); | 
|  |  | 
|  | if (request_irq(state->intr, do_mac53c94_interrupt, 0, "53C94",state)) { | 
|  | printk(KERN_ERR "mac53C94: can't get irq %d for %s\n", | 
|  | state->intr, node->full_name); | 
|  | goto out_free_dma; | 
|  | } | 
|  |  | 
|  | rc = scsi_add_host(host, &mdev->ofdev.dev); | 
|  | if (rc != 0) | 
|  | goto out_release_irq; | 
|  |  | 
|  | scsi_scan_host(host); | 
|  | return 0; | 
|  |  | 
|  | out_release_irq: | 
|  | free_irq(state->intr, state); | 
|  | out_free_dma: | 
|  | kfree(state->dma_cmd_space); | 
|  | out_free: | 
|  | if (state->dma != NULL) | 
|  | iounmap(state->dma); | 
|  | if (state->regs != NULL) | 
|  | iounmap(state->regs); | 
|  | scsi_host_put(host); | 
|  | out_release: | 
|  | macio_release_resources(mdev); | 
|  |  | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | static int mac53c94_remove(struct macio_dev *mdev) | 
|  | { | 
|  | struct fsc_state *fp = (struct fsc_state *)macio_get_drvdata(mdev); | 
|  | struct Scsi_Host *host = fp->host; | 
|  |  | 
|  | scsi_remove_host(host); | 
|  |  | 
|  | free_irq(fp->intr, fp); | 
|  |  | 
|  | if (fp->regs) | 
|  | iounmap(fp->regs); | 
|  | if (fp->dma) | 
|  | iounmap(fp->dma); | 
|  | kfree(fp->dma_cmd_space); | 
|  |  | 
|  | scsi_host_put(host); | 
|  |  | 
|  | macio_release_resources(mdev); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | static struct of_device_id mac53c94_match[] = | 
|  | { | 
|  | { | 
|  | .name 		= "53c94", | 
|  | }, | 
|  | {}, | 
|  | }; | 
|  | MODULE_DEVICE_TABLE (of, mac53c94_match); | 
|  |  | 
|  | static struct macio_driver mac53c94_driver = | 
|  | { | 
|  | .name 		= "mac53c94", | 
|  | .match_table	= mac53c94_match, | 
|  | .probe		= mac53c94_probe, | 
|  | .remove		= mac53c94_remove, | 
|  | }; | 
|  |  | 
|  |  | 
|  | static int __init init_mac53c94(void) | 
|  | { | 
|  | return macio_register_driver(&mac53c94_driver); | 
|  | } | 
|  |  | 
|  | static void __exit exit_mac53c94(void) | 
|  | { | 
|  | return macio_unregister_driver(&mac53c94_driver); | 
|  | } | 
|  |  | 
|  | module_init(init_mac53c94); | 
|  | module_exit(exit_mac53c94); | 
|  |  | 
|  | MODULE_DESCRIPTION("PowerMac 53c94 SCSI driver"); | 
|  | MODULE_AUTHOR("Paul Mackerras <paulus@samba.org>"); | 
|  | MODULE_LICENSE("GPL"); |